Commit Graph

4043 Commits

Author SHA1 Message Date
Giteabot
7da85fa0c3
Sync repo's IsEmpty status correctly (#26517) (#26560)
Backport #26517 by @wxiaoguang

Close #26509

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-17 05:12:14 +00:00
Giteabot
4bdb8dd9cc
Detect ogg mime-type as audio or video (#26494) (#26505)
Backport #26494 by @wxiaoguang

"ogg" is just a "container" format for audio and video.

Golang's `DetectContentType` only reports "application/ogg" for
potential ogg files.

Actually it could do more "guess" to see whether it is a audio file or a
video file.

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-15 11:15:26 +08:00
Giteabot
f1c5d33d3e
Fix storage path logic especially for relative paths (#26441) (#26481)
Backport #26441 by @lunny

This PR rewrites the function `getStorage` and make it more clear.

Include tests from #26435, thanks @earl-warren

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Earl Warren <contact@earl-warren.org>
2023-08-13 22:38:18 -04:00
Giteabot
fe1b11b639
Close stdout correctly for "git blame" (#26470) (#26473)
Backport #26470 by @wxiaoguang

Close stdout correctly for "git blame", otherwise the failed "git blame"
would cause the request hanging forever.

And "os.Stderr" should never (seldom) be used as git command's stderr
(there seems some similar problems in code, they could be fixed later).

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-13 16:00:28 +08:00
Giteabot
80d7288ea4
Remove last newline from config file (#26468) (#26471)
Backport #26468 by @wxiaoguang

When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)

So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-13 00:19:33 +08:00
Giteabot
2d1202b32c
Check first if minio bucket exists before trying to create it (#26420) (#26465)
Backport #26420 by @lunny

For some reason, the permission of the client_id and secret may cannot
create bucket, so now we will check whether bucket does exist first and
then try to create a bucket if it doesn't exist.

Try to fix #25984

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
2023-08-12 09:00:51 +00:00
Giteabot
981ab48503
minio: add missing region on client initialization (#26412) (#26438)
Backport #26412 by @nekrondev

The MinIO client isn't redirecting to the correct AWS endpoint if a
non-default data center is used.

In my use case I created an AWS bucket at `eu-central-1` region. Because
of the missing region initialization of the client the default
`us-east-1` API endpoint is used returning a `301 Moved Permanently`
response that's not handled properly by MinIO client. This in return
aborts using S3 storage on AWS as the `BucketExists()` call will fail
with the http moved error.

MinIO client trace shows the issue:

```text
---------START-HTTP---------
HEAD / HTTP/1.1
Host: xxxxxxxxxxx-prod-gitea-data.s3.dualstack.us-east-1.amazonaws.com
User-Agent: MinIO (windows; amd64) minio-go/v7.0.61
Authorization: AWS4-HMAC-SHA256 Credential=**REDACTED**/20230809/accesspoint.eu-central-1/s3/aws4_request, SignedHeaders=host;x-amz-content-sha256;x-amz-date, Signature=**REDACTED**
X-Amz-Content-Sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
X-Amz-Date: 20230809T141143Z

HTTP/1.1 301 Moved Permanently
Connection: close
Content-Type: application/xml
Date: Wed, 09 Aug 2023 14:11:43 GMT
Server: AmazonS3
X-Amz-Bucket-Region: eu-central-1
X-Amz-Id-2: UK7wfeYi0HcTcytNvQ3wTAZ5ZP1mOSMnvRZ9Fz4xXzeNsS47NB/KfFx2unFxo3L7XckHpMNPPVo=
X-Amz-Request-Id: S1V2MJV8SZ11GEVN
---------END-HTTP---------
```

Co-authored-by: nekrondev <heiko@noordsee.de>
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
2023-08-10 14:11:22 +00:00
wxiaoguang
8ad331c9d2
Fix admin queue page title and fix CI failures (#26409) (#26421)
Backport #26409

* Fix #26408
* Bypass the data race issue in "ssh" package
2023-08-10 11:04:48 +02:00
Giteabot
2d1a7e1cd4
Introduce ctx.PathParamRaw to avoid incorrect unescaping (#26392) (#26405)
Backport #26392 by @wxiaoguang

Fix #26389

And complete an old TODO: `ctx.Params does un-escaping,..., which is
incorrect.`

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-09 07:31:44 +00:00
wxiaoguang
fa431b377d
Fix incorrect CLI exit code and duplicate error message (#26346) (#26347)
Backport #26346

Follow the CLI refactoring, and add tests.
2023-08-05 23:37:04 +08:00
Giteabot
3e9475b3b2
Prevent newline errors with Debian packages (#26332) (#26342)
Backport #26332 by @KN4CK3R

Fixes #26313

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-08-05 11:41:30 +02:00
Giteabot
9451781ebe
Make git batch operations use parent context timeout instead of default timeout (#26325) (#26330)
Backport #26325 by @wxiaoguang

Fix #26064

Some git commands should use parent context, otherwise it would exit too
early (by the default timeout, 10m), and the "cmd.Wait" waits till the
pipes are closed.

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-04 15:44:25 +02:00
Giteabot
88f6f7579c
Fix the wrong derive path (#26271) (#26318)
Backport #26271 by @lunny

This PR will fix #26264, caused by #23911.

The package configuration derive is totally wrong when storage type is
local in that PR.

This PR fixed the inherit logic when storage type is local with some
unit tests.

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-04 06:24:13 +00:00
Giteabot
a57568bad7
Support getting changed files when commit ID is EmptySHA (#26290) (#26316)
Backport #26290 by @Zettat123

Fixes #26270.

Co-Author: @wxiaoguang 

Thanks @lunny for providing this solution

As
https://github.com/go-gitea/gitea/issues/26270#issuecomment-1661695151
said, at present we cannot get the names of changed files correctly when
the `OldCommitID` is `EmptySHA`. In this PR, the `GetCommitFilesChanged`
method is added and will be used to get the changed files by commit ID.

References:
- https://stackoverflow.com/a/424142

Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-04 03:27:45 +00:00
Giteabot
a758337046
Clarify the logger's MODE config option (#26267) (#26281)
Backport #26267 by @wxiaoguang

1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-02 01:08:28 +02:00
Giteabot
499c5594c3
Fix allowed user types setting problem (#26200) (#26206)
Backport #26200 by @lunny

Fix #25951

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-07-29 14:42:40 +08:00
Giteabot
892e24aaf1
Calculate MAX_WORKERS default value by CPU number (#26177) (#26183) 2023-07-27 19:24:07 +08:00
Lunny Xiao
c598741f01
Display deprecated warning in admin panel pages as well as in the log file (#26094) (#26154)
backport #26094 
Temporily resolve #25915
Related #25994

This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.

<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
2023-07-26 09:22:39 +00:00
Giteabot
782b137682
Fix incorrect router logger (#26137) (#26143)
Backport #26137 by @wxiaoguang

A low-level mistake:

* `log.Info` is global `Info` function, which calls "default" logger
* `logger.Info` is the for router's logger

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-26 08:37:43 +08:00
Giteabot
e2596b0a99
Avoid writing config file if not installed (#26107) (#26113)
Backport #26107 by @wxiaoguang

Just like others (oauth2 secret, internal token, etc), do not generate
if no install lock

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-25 13:31:50 +08:00
Giteabot
a424f6d4f8
Fix handling of Debian files with trailing slash (#26087) (#26098)
Backport #26087 by @KN4CK3R

Fixes #26022

- Fix handling of files with trailing slash
- Fix handling of duplicate package file errors
- Added test for both

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-07-24 14:56:13 +00:00
Giteabot
8d9193680d
Use stderr as fallback if the log file can't be opened (#26074) (#26083)
Backport #26074 by @wxiaoguang

If the log file can't be opened, what should it do? panic/exit? ignore
logs? fallback to stderr?

It seems that "fallback to stderr" is slightly better than others ....
2023-07-24 05:58:16 +00:00
Giteabot
8b002b429d
Adding remaining enum for migration repo model type. (#26021) (#26034)
Backport #26021 by @puni9869

Fixes: https://github.com/go-gitea/gitea/issues/26010

Adding remaining enum for migration repo model type.

Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
2023-07-21 08:54:43 +02:00
Giteabot
4d5e3b9372
Fix env config parsing for "GITEA____APP_NAME" (#26001) (#26013)
Backport #26001 by @wxiaoguang

Regression of #24832 

Fix the bug and add a test for it

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-20 11:56:36 +02:00
Giteabot
ee47face12
Update path related documents (#25417) (#25982)
Backport #25417 by @wxiaoguang

Update WorkPath/WORK_PATH related documents, remove out-dated
information.

Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.


![image](https://github.com/go-gitea/gitea/assets/2114189/8095afa4-da76-436b-9e89-2a92c229c01d)

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-19 09:48:54 +00:00
wxiaoguang
5c3662b902
Avoid creating directories when loading config (#25944) (#25957)
Backport #25944

The "creating dir/file during load config" is a longstanding and complex
problem.

This PR only does a quick patch, it still needs more refactorings in the
future.

Fix #25938
2023-07-18 20:24:07 +00:00
KN4CK3R
ab54310731
Disallow dangerous URL schemes (#25960) (#25964)
Regression: https://github.com/go-gitea/gitea/pull/24805
Closes: #25945

- Disallow `javascript`, `vbscript` and `data` (data uri images still
work) url schemes even if all other schemes are allowed
- Fixed older `cbthunderlink` tests

---------

Co-authored-by: delvh <dev.lh@web.de>
2023-07-18 19:48:52 +00:00
Giteabot
9369b38315
Skip unuseful error message in dev mode when watching local filesystem (#25919) (#25927)
Backport #25919 by @wxiaoguang

Before, in dev mode, there might be some error logs like:

```
2023/07/17 13:54:51 ...s/assetfs/layered.go:221:WatchLocalChanges() [E] Unable to watch directory .: lstat /data/work/gitea/custom/templates: no such file or directory

```

Because there is no "custom/templates" directory.

After: ignore such error, no such error message anymore.

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-17 10:26:29 +00:00
Giteabot
6e82d0bb7c
Add shutting down notice (#25920) (#25922)
Backport #25920 by @KN4CK3R

Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.

This PR adds a notice that the system is shutting down because of the
deprecated setting.

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-07-17 09:44:10 +00:00
Giteabot
45b1f4dd3b
Add support for different Maven POM encoding (#25873) (#25890)
Backport #25873 by @KN4CK3R

Fixes #25853

- Maven POM files aren't always UTF-8 encoded.
- Reject the upload of unparsable POM files

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-07-14 10:27:15 +00:00
Zettat123
c1a10be07e
Fix activity type match in matchPullRequestEvent (#25746) (#25796)
Backport #25746

Fix #25736
Caused by #24048

Right now we only check the activity type for `pull_request` event when
`types` is specified or there are no `types` and filter. If a workflow
only specifies filters but no `types` like this:
```
on:
  pull_request:
    branches: [main]
```
the workflow will be triggered even if the activity type is not one of
`[opened, reopened, sync]`. We need to check the activity type in this
case.
2023-07-11 06:42:07 +00:00
wxiaoguang
b4460cf541
Make "install page" respect environment config (#25648) (#25799)
Backport #25648

Replace #25580

Fix #19453

The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.

So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.

And, to make things clear, there are enough messages on the UI to tell
users what will happen.

There are some necessary/related changes to `environment-to-ini.go`:

* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.

The only conflict during backport is "ui divider" in
templates/install.tmpl
2023-07-10 11:51:05 +00:00
Giteabot
372b622c2b
Revert package access change from #23879 (#25707) (#25785)
Backport #25707 by @KN4CK3R

Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972

Regression #23879

#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.

That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-07-09 21:00:42 +00:00
silverwind
24e64fe372
Replace interface{} with any (#25686) (#25687)
Same perl replacement as https://github.com/go-gitea/gitea/pull/25686
but for 1.20 to ease future backporting.
2023-07-04 23:41:32 -04:00
Giteabot
24cf06592e
Restrict [actions].DEFAULT_ACTIONS_URL to only github or self (#25581) (#25604)
Backport #25581 by @wolfogre

Resolve #24789

## ⚠️ BREAKING ⚠️

Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.

But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.

If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.

Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.

Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.

Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.

Follow-up on the runner side:

- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70

Co-authored-by: Jason Song <i@wolfogre.com>
2023-06-30 07:53:00 +00:00
wxiaoguang
e6f62eea70
Do not prepare oauth2 config if it is not enabled, do not write config in some sub-commands (#25567) (#25576)
Backport #25567

Ref:

* https://github.com/go-gitea/gitea/issues/25377#issuecomment-1609757289

And some sub-commands like "generate" / "docs", they do not need to use
the ini config
2023-06-29 06:30:40 +02:00
Giteabot
8981f6d0fc
Fix content holes in Actions task logs file (#25560) (#25566)
Backport #25560 by @wolfogre

Fix #25451.

Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.

Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.

Co-authored-by: Jason Song <i@wolfogre.com>
2023-06-28 23:39:23 +00:00
wxiaoguang
0eb4ab4246
Fix sub-command log level (#25537) (#25553)
Backport #25537

More fix for #24981

* #24981

Close #22361, #25552

* #22361
* #25552

There were many patches for Gitea's sub-commands to satisfy the facts:

* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs

That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.

In the future, the sub-command system should be refactored to a clear
solution.

----

Other changes:

* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
2023-06-28 17:35:20 +08:00
Giteabot
9d69a4758e
Add Adopt repository event and handler (#25497) (#25518)
Backport #25497 by @lunny

Fix #14304

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-06-26 20:09:07 +00:00
Giteabot
71d2a6a41a
Use InitWorkPathAndCfgProvider for environment-to-ini to avoid unnecessary checks (#25480) (#25488)
Backport #25480 by @wxiaoguang

Fix #25481

The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".

Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)

ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-24 14:04:50 +00:00
wxiaoguang
061b68e995
Refactor path & config system (#25330) (#25416)
Backport #25330

# The problem

There were many "path tricks":

* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
    * The "serv" process started by OpenSSH server
    * The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling

# The solution

* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.

The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default

The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default


## ⚠️ BREAKING

If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
2023-06-22 16:27:18 +00:00
John Olheiser
734fd93f59
Move some regexp out of functions (#25430) (#25445)
Partial backport of #25430

Not a bug, but worth backporting for efficiency.

Signed-off-by: jolheiser <john.olheiser@gmail.com>
2023-06-22 16:01:54 +00:00
Giteabot
203fe2841d
Fix Permission in API returned repository struct (#25388) (#25441)
Backport #25388 by @wolfogre

The old code generates `structs.Repository.Permissions` with only
`access.Permission.AccessMode`, however, it should check the units too,
or the value could be incorrect. For example,
`structs.Repository.Permissions.Push` could be false even the doer has
write access to code unit.

Should fix
https://github.com/renovatebot/renovate/issues/14059#issuecomment-1047961128
(Not reported by it, I just found it when I was looking into this bug)

---

Review tips:

The major changes are
- `modules/structs/repo.go`
https://github.com/go-gitea/gitea/pull/25388/files#diff-870406f6857117f8b03611c43fca0ab9ed6d6e76a2d0069a7c1f17e8fa9092f7
- `services/convert/repository.go`
https://github.com/go-gitea/gitea/pull/25388/files#diff-7736f6d2ae894c9edb7729a80ab89aa183b888a26a811a0c1fdebd18726a7101

And other changes are passive.

Co-authored-by: Jason Song <i@wolfogre.com>
2023-06-22 17:01:42 +02:00
wxiaoguang
cb3173a1e9
Use "utf8mb4" for MySQL by default (#25432)
TBH, I don't see much difference from `Remove "CHARSET" config option
for MySQL, always use "utf8mb4"` #25413

Close #25413
2023-06-22 07:38:23 +02:00
Giteabot
ffe089432f
Fix missing commit message body when the message has leading newlines (#25418) (#25422)
Backport #25418 by @wolfogre

Commit with `echo "\nmessage after a blank line\nsecond line of the
message" | git commit --cleanup=verbatim -F -` and push.

<img width="1139" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/f9a2c28c-e307-4c78-9e31-3d3ace7b9274">

Co-authored-by: Jason Song <i@wolfogre.com>
2023-06-21 13:55:08 +02:00
Giteabot
8302b95d6b
Avoid polluting config file when "save" (#25395) (#25406)
Backport #25395 by @wxiaoguang

That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.

Ideally we should refactor the INI package to a clear solution, but it's
a huge work.

A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.

Partially fix #25377, the "install" page needs more fine tunes.

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-21 04:51:26 +00:00
Giteabot
e9fab3ea3e
Avoid polluting the config (#25345) (#25354)
Backport #25345 by @wxiaoguang

Caught by #25330

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-18 20:56:50 +00:00
wxiaoguang
e0bd6ebabd
Fix incorrect config argument position for builtin SSH server (#25341)
The "--config" option is a global option, it shouldn't appear at the
end.

Otherwise it might not be respected in some cases.

Caught by #25330 and use a separate PR to fix it for 1.20
2023-06-18 16:56:21 +00:00
Giteabot
031ddfcb7b
Fix index generation parallelly failure (#25235) (#25269)
Backport #25235 by @lunny

Fix #22109

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
2023-06-15 02:14:00 +00:00
yp05327
d686aa0d31
Fix profile render when the README.md size is larger than 1024 bytes (#25270)
Backport #25131
2023-06-15 01:39:34 +00:00