postgresql/src/test/isolation/specs/detach-partition-concurrent...

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

70 lines
2.6 KiB
RPMSpec
Raw Normal View History

ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# Test that detach partition concurrently makes the partition invisible at the
# correct time.
setup
{
DROP TABLE IF EXISTS d_listp, d_listp1, d_listp2;
CREATE TABLE d_listp (a int) PARTITION BY LIST(a);
CREATE TABLE d_listp1 PARTITION OF d_listp FOR VALUES IN (1);
CREATE TABLE d_listp2 PARTITION OF d_listp FOR VALUES IN (2);
INSERT INTO d_listp VALUES (1),(2);
}
teardown {
DROP TABLE IF EXISTS d_listp, d_listp2, d_listp_foobar;
}
session s1
step s1b { BEGIN; }
step s1brr { BEGIN ISOLATION LEVEL REPEATABLE READ; }
step s1s { SELECT * FROM d_listp; }
step s1ins { INSERT INTO d_listp VALUES (1); }
step s1ins2 { INSERT INTO d_listp VALUES (2); }
step s1prep { PREPARE f(int) AS INSERT INTO d_listp VALUES ($1); }
step s1prep1 { PREPARE f(int) AS INSERT INTO d_listp VALUES (1); }
step s1prep2 { PREPARE f(int) AS INSERT INTO d_listp VALUES (2); }
step s1exec1 { EXECUTE f(1); }
step s1exec2 { EXECUTE f(2); }
step s1dealloc { DEALLOCATE f; }
step s1c { COMMIT; }
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
session s2
step s2detach { ALTER TABLE d_listp DETACH PARTITION d_listp2 CONCURRENTLY; }
step s2drop { DROP TABLE d_listp2; }
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
session s3
step s3s { SELECT * FROM d_listp; }
step s3i { SELECT relpartbound IS NULL FROM pg_class where relname = 'd_listp2'; }
step s3ins2 { INSERT INTO d_listp VALUES (2); }
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# The transaction that detaches hangs until it sees any older transaction
# terminate, as does anybody else.
permutation s1b s1s s2detach s1s s1c s1s
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# relpartbound remains set until s1 commits
# XXX this could be timing dependent :-(
permutation s1b s1s s2detach s1s s3s s3i s1c s3i s2drop s1s
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# In read-committed mode, the partition disappears from view of concurrent
# transactions immediately. But if a write lock is held, then the detach
# has to wait.
permutation s1b s1s s2detach s1ins s1s s1c
permutation s1b s1s s1ins2 s2detach s1ins s1s s1c
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# In repeatable-read mode, the partition remains visible until commit even
# if the to-be-detached partition is not locked for write.
permutation s1brr s1s s2detach s1ins s1s s1c
permutation s1brr s1s s2detach s1s s1c
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# Another process trying to acquire a write lock will be blocked behind the
# detacher
permutation s1b s1ins2 s2detach s3ins2 s1c
ALTER TABLE ... DETACH PARTITION ... CONCURRENTLY Allow a partition be detached from its partitioned table without blocking concurrent queries, by running in two transactions and only requiring ShareUpdateExclusive in the partitioned table. Because it runs in two transactions, it cannot be used in a transaction block. This is the main reason to use dedicated syntax: so that users can choose to use the original mode if they need it. But also, it doesn't work when a default partition exists (because an exclusive lock would still need to be obtained on it, in order to change its partition constraint.) In case the second transaction is cancelled or a crash occurs, there's ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final steps. The main trick to make this work is the addition of column pg_inherits.inhdetachpending, initially false; can only be set true in the first part of this command. Once that is committed, concurrent transactions that use a PartitionDirectory will include or ignore partitions so marked: in optimizer they are ignored if the row is marked committed for the snapshot; in executor they are always included. As a result, and because of the way PartitionDirectory caches partition descriptors, queries that were planned before the detach will see the rows in the detached partition and queries that are planned after the detach, won't. A CHECK constraint is created that duplicates the partition constraint. This is probably not strictly necessary, and some users will prefer to remove it afterwards, but if the partition is re-attached to a partitioned table, the constraint needn't be rechecked. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
2021-03-25 22:00:28 +01:00
# a prepared query is not blocked
permutation s1brr s1prep s1s s2detach s1s s1exec1 s3s s1dealloc s1c
permutation s1brr s1prep s1exec2 s2detach s1s s1exec2 s3s s1c s1dealloc
permutation s1brr s1prep s1s s2detach s1s s1exec2 s1c s1dealloc
permutation s1brr s1prep s2detach s1s s1exec2 s1c s1dealloc
permutation s1brr s1prep1 s2detach s1s s1exec2 s1c s1dealloc
permutation s1brr s1prep2 s2detach s1s s1exec2 s1c s1dealloc