UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
/*-------------------------------------------------------------------------
|
|
|
|
|
*
|
2002-09-05 01:31:35 +02:00
|
|
|
* be-secure.c
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
* functions related to setting up a secure connection to the frontend.
|
|
|
|
|
* Secure connections are expected to provide confidentiality,
|
|
|
|
|
* message integrity and endpoint authentication.
|
|
|
|
|
*
|
|
|
|
|
*
|
2019-01-02 18:44:25 +01:00
|
|
|
* Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
* Portions Copyright (c) 1994, Regents of the University of California
|
|
|
|
|
*
|
|
|
|
|
*
|
|
|
|
|
* IDENTIFICATION
|
2010-09-20 22:08:53 +02:00
|
|
|
* src/backend/libpq/be-secure.c
|
2002-06-14 06:31:49 +02:00
|
|
|
*
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
*-------------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "postgres.h"
|
|
|
|
|
|
|
|
|
|
#include <signal.h>
|
|
|
|
|
#include <fcntl.h>
|
|
|
|
|
#include <ctype.h>
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
|
#include <netdb.h>
|
|
|
|
|
#include <netinet/in.h>
|
|
|
|
|
#ifdef HAVE_NETINET_TCP_H
|
|
|
|
|
#include <netinet/tcp.h>
|
|
|
|
|
#include <arpa/inet.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
2003-07-27 23:49:55 +02:00
|
|
|
#include "libpq/libpq.h"
|
2015-02-03 22:03:48 +01:00
|
|
|
#include "miscadmin.h"
|
2016-10-04 16:50:13 +02:00
|
|
|
#include "pgstat.h"
|
2005-06-02 23:03:25 +02:00
|
|
|
#include "tcop/tcopprot.h"
|
2012-02-23 21:48:04 +01:00
|
|
|
#include "utils/memutils.h"
|
2015-11-12 15:00:33 +01:00
|
|
|
#include "storage/ipc.h"
|
2015-02-03 22:03:48 +01:00
|
|
|
#include "storage/proc.h"
|
2005-06-02 23:03:25 +02:00
|
|
|
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
2018-06-26 10:19:35 +02:00
|
|
|
char *ssl_library;
|
2012-06-10 21:20:04 +02:00
|
|
|
char *ssl_cert_file;
|
|
|
|
|
char *ssl_key_file;
|
|
|
|
|
char *ssl_ca_file;
|
|
|
|
|
char *ssl_crl_file;
|
Always use 2048 bit DH parameters for OpenSSL ephemeral DH ciphers.
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
2017-07-31 21:36:09 +02:00
|
|
|
char *ssl_dh_params_file;
|
2018-02-26 19:28:38 +01:00
|
|
|
char *ssl_passphrase_command;
|
|
|
|
|
bool ssl_passphrase_command_supports_reload;
|
2012-02-23 09:20:25 +01:00
|
|
|
|
2013-10-17 16:27:02 +02:00
|
|
|
#ifdef USE_SSL
|
2015-05-24 03:35:49 +02:00
|
|
|
bool ssl_loaded_verify_locations = false;
|
2010-12-18 16:53:59 +01:00
|
|
|
#endif
|
2007-02-16 03:59:41 +01:00
|
|
|
|
2007-02-16 18:07:00 +01:00
|
|
|
/* GUC variable controlling SSL cipher list */
|
2007-11-15 22:14:46 +01:00
|
|
|
char *SSLCipherSuites = NULL;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
2013-12-07 21:11:44 +01:00
|
|
|
/* GUC variable for default ECHD curve. */
|
|
|
|
|
char *SSLECDHCurve;
|
|
|
|
|
|
2013-12-07 14:04:27 +01:00
|
|
|
/* GUC variable: if false, prefer client ciphers */
|
2014-05-06 18:12:18 +02:00
|
|
|
bool SSLPreferServerCiphers;
|
2013-12-07 14:04:27 +01:00
|
|
|
|
2018-11-20 21:49:01 +01:00
|
|
|
int ssl_min_protocol_version;
|
|
|
|
|
int ssl_max_protocol_version;
|
|
|
|
|
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
/* ------------------------------------------------------------ */
|
2002-09-04 22:31:48 +02:00
|
|
|
/* Procedures common to all secure sessions */
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
/* ------------------------------------------------------------ */
|
|
|
|
|
|
|
|
|
|
/*
|
2017-01-03 03:37:12 +01:00
|
|
|
* Initialize global context.
|
|
|
|
|
*
|
2017-01-04 18:43:52 +01:00
|
|
|
* If isServerStart is true, report any errors as FATAL (so we don't return).
|
|
|
|
|
* Otherwise, log errors at LOG level and return -1 to indicate trouble,
|
|
|
|
|
* preserving the old SSL state if any. Returns 0 if OK.
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
*/
|
|
|
|
|
int
|
2017-01-04 18:43:52 +01:00
|
|
|
secure_initialize(bool isServerStart)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
|
|
|
|
#ifdef USE_SSL
|
2017-01-04 18:43:52 +01:00
|
|
|
return be_tls_init(isServerStart);
|
2017-01-03 03:37:12 +01:00
|
|
|
#else
|
|
|
|
|
return 0;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
#endif
|
2017-01-03 03:37:12 +01:00
|
|
|
}
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
2017-01-03 03:37:12 +01:00
|
|
|
/*
|
|
|
|
|
* Destroy global context, if any.
|
|
|
|
|
*/
|
|
|
|
|
void
|
|
|
|
|
secure_destroy(void)
|
|
|
|
|
{
|
|
|
|
|
#ifdef USE_SSL
|
|
|
|
|
be_tls_destroy();
|
|
|
|
|
#endif
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
}
|
|
|
|
|
|
2008-11-20 10:29:36 +01:00
|
|
|
/*
|
|
|
|
|
* Indicate if we have loaded the root CA store to verify certificates
|
|
|
|
|
*/
|
|
|
|
|
bool
|
|
|
|
|
secure_loaded_verify_locations(void)
|
|
|
|
|
{
|
|
|
|
|
#ifdef USE_SSL
|
|
|
|
|
return ssl_loaded_verify_locations;
|
2012-07-16 21:15:03 +02:00
|
|
|
#else
|
2008-11-20 10:29:36 +01:00
|
|
|
return false;
|
2012-07-16 21:15:03 +02:00
|
|
|
#endif
|
2008-11-20 10:29:36 +01:00
|
|
|
}
|
|
|
|
|
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
/*
|
|
|
|
|
* Attempt to negotiate secure session.
|
|
|
|
|
*/
|
2002-07-15 23:34:05 +02:00
|
|
|
int
|
2002-09-04 22:31:48 +02:00
|
|
|
secure_open_server(Port *port)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
2002-09-04 22:31:48 +02:00
|
|
|
int r = 0;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
|
|
|
|
#ifdef USE_SSL
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
r = be_tls_open_server(port);
|
2018-01-19 16:17:56 +01:00
|
|
|
|
|
|
|
|
ereport(DEBUG2,
|
|
|
|
|
(errmsg("SSL connection from \"%s\"",
|
|
|
|
|
port->peer_cn ? port->peer_cn : "(anonymous)")));
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Close secure session.
|
|
|
|
|
*/
|
|
|
|
|
void
|
2002-09-04 22:31:48 +02:00
|
|
|
secure_close(Port *port)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
|
|
|
|
#ifdef USE_SSL
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
if (port->ssl_in_use)
|
|
|
|
|
be_tls_close(port);
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Read data from a secure connection.
|
|
|
|
|
*/
|
|
|
|
|
ssize_t
|
2002-09-04 22:31:48 +02:00
|
|
|
secure_read(Port *port, void *ptr, size_t len)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
2002-09-04 22:31:48 +02:00
|
|
|
ssize_t n;
|
2015-02-13 20:46:14 +01:00
|
|
|
int waitfor;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
2018-10-20 03:39:21 +02:00
|
|
|
/* Deal with any already-pending interrupt condition. */
|
|
|
|
|
ProcessClientReadInterrupt(false);
|
|
|
|
|
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
retry:
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
#ifdef USE_SSL
|
2015-02-13 20:46:14 +01:00
|
|
|
waitfor = 0;
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
if (port->ssl_in_use)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
2015-02-13 20:46:14 +01:00
|
|
|
n = be_tls_read(port, ptr, len, &waitfor);
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
}
|
|
|
|
|
else
|
GSSAPI encryption support
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
2019-04-03 21:02:33 +02:00
|
|
|
#endif
|
|
|
|
|
#ifdef ENABLE_GSS
|
|
|
|
|
if (port->gss->enc)
|
|
|
|
|
{
|
|
|
|
|
n = be_gssapi_read(port, ptr, len);
|
|
|
|
|
waitfor = WL_SOCKET_READABLE;
|
|
|
|
|
}
|
|
|
|
|
else
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
#endif
|
2005-06-02 23:03:25 +02:00
|
|
|
{
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
n = secure_raw_read(port, ptr, len);
|
2015-02-13 20:46:14 +01:00
|
|
|
waitfor = WL_SOCKET_READABLE;
|
2005-06-02 23:03:25 +02:00
|
|
|
}
|
|
|
|
|
|
2015-02-13 20:46:14 +01:00
|
|
|
/* In blocking mode, wait until the socket is ready */
|
|
|
|
|
if (n < 0 && !port->noblock && (errno == EWOULDBLOCK || errno == EAGAIN))
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
{
|
2016-06-10 00:02:36 +02:00
|
|
|
WaitEvent event;
|
2015-02-13 20:46:14 +01:00
|
|
|
|
|
|
|
|
Assert(waitfor);
|
|
|
|
|
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
ModifyWaitEvent(FeBeWaitSet, 0, waitfor, NULL);
|
|
|
|
|
|
2016-10-04 16:50:13 +02:00
|
|
|
WaitEventSetWait(FeBeWaitSet, -1 /* no timeout */ , &event, 1,
|
|
|
|
|
WAIT_EVENT_CLIENT_READ);
|
2015-02-13 20:46:14 +01:00
|
|
|
|
2015-11-12 15:00:33 +01:00
|
|
|
/*
|
|
|
|
|
* If the postmaster has died, it's not safe to continue running,
|
|
|
|
|
* because it is the postmaster's job to kill us if some other backend
|
2018-12-04 17:04:54 +01:00
|
|
|
* exits uncleanly. Moreover, we won't run very well in this state;
|
2015-11-12 15:00:33 +01:00
|
|
|
* helper processes like walwriter and the bgwriter will exit, so
|
2016-06-10 00:02:36 +02:00
|
|
|
* performance may be poor. Finally, if we don't exit, pg_ctl will be
|
|
|
|
|
* unable to restart the postmaster without manual intervention, so no
|
|
|
|
|
* new connections can be accepted. Exiting clears the deck for a
|
|
|
|
|
* postmaster restart.
|
2015-11-12 15:00:33 +01:00
|
|
|
*
|
2016-06-10 00:02:36 +02:00
|
|
|
* (Note that we only make this check when we would otherwise sleep on
|
|
|
|
|
* our latch. We might still continue running for a while if the
|
2015-11-12 15:00:33 +01:00
|
|
|
* postmaster is killed in mid-query, or even through multiple queries
|
|
|
|
|
* if we never have to wait for read. We don't want to burn too many
|
|
|
|
|
* cycles checking for this very rare condition, and this should cause
|
|
|
|
|
* us to exit quickly in most cases.)
|
|
|
|
|
*/
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
if (event.events & WL_POSTMASTER_DEATH)
|
2015-11-12 15:00:33 +01:00
|
|
|
ereport(FATAL,
|
|
|
|
|
(errcode(ERRCODE_ADMIN_SHUTDOWN),
|
2016-06-10 00:02:36 +02:00
|
|
|
errmsg("terminating connection due to unexpected postmaster exit")));
|
2015-11-12 15:00:33 +01:00
|
|
|
|
2015-02-13 20:46:14 +01:00
|
|
|
/* Handle interrupt. */
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
if (event.events & WL_LATCH_SET)
|
2015-02-13 20:46:14 +01:00
|
|
|
{
|
|
|
|
|
ResetLatch(MyLatch);
|
|
|
|
|
ProcessClientReadInterrupt(true);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We'll retry the read. Most likely it will return immediately
|
2015-05-24 03:35:49 +02:00
|
|
|
* because there's still no data available, and we'll wait for the
|
|
|
|
|
* socket to become ready again.
|
2015-02-13 20:46:14 +01:00
|
|
|
*/
|
|
|
|
|
}
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
goto retry;
|
|
|
|
|
}
|
2015-02-03 22:45:45 +01:00
|
|
|
|
|
|
|
|
/*
|
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
2018-10-20 03:39:21 +02:00
|
|
|
* Process interrupts that happened during a successful (or non-blocking,
|
|
|
|
|
* or hard-failed) read.
|
2015-02-03 22:45:45 +01:00
|
|
|
*/
|
|
|
|
|
ProcessClientReadInterrupt(false);
|
|
|
|
|
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
return n;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ssize_t
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
secure_raw_read(Port *port, void *ptr, size_t len)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
2002-09-04 22:31:48 +02:00
|
|
|
ssize_t n;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
|
2015-02-03 22:03:48 +01:00
|
|
|
/*
|
|
|
|
|
* Try to read from the socket without blocking. If it succeeds we're
|
|
|
|
|
* done, otherwise we'll wait for the socket using the latch mechanism.
|
|
|
|
|
*/
|
|
|
|
|
#ifdef WIN32
|
|
|
|
|
pgwin32_noblock = true;
|
|
|
|
|
#endif
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
n = recv(port->sock, ptr, len, 0);
|
2015-02-03 22:03:48 +01:00
|
|
|
#ifdef WIN32
|
|
|
|
|
pgwin32_noblock = false;
|
|
|
|
|
#endif
|
|
|
|
|
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
return n;
|
2002-06-14 06:38:04 +02:00
|
|
|
}
|
2002-06-14 06:36:58 +02:00
|
|
|
|
2013-12-07 21:11:44 +01:00
|
|
|
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
/*
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
* Write data to a secure connection.
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
*/
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
ssize_t
|
|
|
|
|
secure_write(Port *port, void *ptr, size_t len)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
ssize_t n;
|
2015-02-13 20:46:14 +01:00
|
|
|
int waitfor;
|
2003-12-18 23:49:26 +01:00
|
|
|
|
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
2018-10-20 03:39:21 +02:00
|
|
|
/* Deal with any already-pending interrupt condition. */
|
|
|
|
|
ProcessClientWriteInterrupt(false);
|
|
|
|
|
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
retry:
|
2015-02-13 20:46:14 +01:00
|
|
|
waitfor = 0;
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
#ifdef USE_SSL
|
|
|
|
|
if (port->ssl_in_use)
|
2004-10-06 11:35:23 +02:00
|
|
|
{
|
2015-02-13 20:46:14 +01:00
|
|
|
n = be_tls_write(port, ptr, len, &waitfor);
|
2004-10-06 11:35:23 +02:00
|
|
|
}
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
else
|
GSSAPI encryption support
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
2019-04-03 21:02:33 +02:00
|
|
|
#endif
|
|
|
|
|
#ifdef ENABLE_GSS
|
|
|
|
|
if (port->gss->enc)
|
|
|
|
|
{
|
|
|
|
|
n = be_gssapi_write(port, ptr, len);
|
|
|
|
|
waitfor = WL_SOCKET_WRITEABLE;
|
|
|
|
|
}
|
|
|
|
|
else
|
2004-11-20 01:18:18 +01:00
|
|
|
#endif
|
2015-02-03 22:03:48 +01:00
|
|
|
{
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
n = secure_raw_write(port, ptr, len);
|
2015-02-13 20:46:14 +01:00
|
|
|
waitfor = WL_SOCKET_WRITEABLE;
|
2015-02-03 22:03:48 +01:00
|
|
|
}
|
2012-02-23 21:48:04 +01:00
|
|
|
|
2015-02-13 20:46:14 +01:00
|
|
|
if (n < 0 && !port->noblock && (errno == EWOULDBLOCK || errno == EAGAIN))
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
{
|
2016-06-10 00:02:36 +02:00
|
|
|
WaitEvent event;
|
2015-02-13 20:46:14 +01:00
|
|
|
|
|
|
|
|
Assert(waitfor);
|
2015-02-03 22:45:45 +01:00
|
|
|
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
ModifyWaitEvent(FeBeWaitSet, 0, waitfor, NULL);
|
|
|
|
|
|
2016-10-04 16:50:13 +02:00
|
|
|
WaitEventSetWait(FeBeWaitSet, -1 /* no timeout */ , &event, 1,
|
|
|
|
|
WAIT_EVENT_CLIENT_WRITE);
|
2015-02-13 20:46:14 +01:00
|
|
|
|
2015-11-12 15:00:33 +01:00
|
|
|
/* See comments in secure_read. */
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
if (event.events & WL_POSTMASTER_DEATH)
|
2015-11-12 15:00:33 +01:00
|
|
|
ereport(FATAL,
|
|
|
|
|
(errcode(ERRCODE_ADMIN_SHUTDOWN),
|
2016-06-10 00:02:36 +02:00
|
|
|
errmsg("terminating connection due to unexpected postmaster exit")));
|
2015-11-12 15:00:33 +01:00
|
|
|
|
2015-02-13 20:46:14 +01:00
|
|
|
/* Handle interrupt. */
|
Introduce WaitEventSet API.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com
20160114143931.GG10941@awork2.anarazel.de
2016-03-21 09:56:39 +01:00
|
|
|
if (event.events & WL_LATCH_SET)
|
2015-02-13 20:46:14 +01:00
|
|
|
{
|
|
|
|
|
ResetLatch(MyLatch);
|
|
|
|
|
ProcessClientWriteInterrupt(true);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We'll retry the write. Most likely it will return immediately
|
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
2018-10-20 03:39:21 +02:00
|
|
|
* because there's still no buffer space available, and we'll wait
|
|
|
|
|
* for the socket to become ready again.
|
2015-02-13 20:46:14 +01:00
|
|
|
*/
|
|
|
|
|
}
|
Introduce and use infrastructure for interrupt processing during client reads.
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
2015-02-03 22:25:20 +01:00
|
|
|
goto retry;
|
|
|
|
|
}
|
|
|
|
|
|
2015-02-13 20:46:14 +01:00
|
|
|
/*
|
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
2018-10-20 03:39:21 +02:00
|
|
|
* Process interrupts that happened during a successful (or non-blocking,
|
|
|
|
|
* or hard-failed) write.
|
2015-02-13 20:46:14 +01:00
|
|
|
*/
|
|
|
|
|
ProcessClientWriteInterrupt(false);
|
|
|
|
|
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
return n;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
}
|
|
|
|
|
|
Break out OpenSSL-specific code to separate files.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
2014-08-11 10:54:19 +02:00
|
|
|
ssize_t
|
|
|
|
|
secure_raw_write(Port *port, const void *ptr, size_t len)
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
{
|
2015-02-03 22:03:48 +01:00
|
|
|
ssize_t n;
|
|
|
|
|
|
|
|
|
|
#ifdef WIN32
|
|
|
|
|
pgwin32_noblock = true;
|
|
|
|
|
#endif
|
|
|
|
|
n = send(port->sock, ptr, len, 0);
|
|
|
|
|
#ifdef WIN32
|
|
|
|
|
pgwin32_noblock = false;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
return n;
|
UPDATED PATCH:
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
2002-06-14 06:23:17 +02:00
|
|
|
}
|
