XLOG (and related) changes:
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
2001-03-13 02:17:06 +01:00
|
|
|
/*
|
|
|
|
* xlogutils.h
|
|
|
|
*
|
2014-08-13 14:39:08 +02:00
|
|
|
* Utilities for replaying WAL records.
|
XLOG (and related) changes:
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
2001-03-13 02:17:06 +01:00
|
|
|
*
|
2020-01-01 18:21:45 +01:00
|
|
|
* Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
|
XLOG (and related) changes:
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
2001-03-13 02:17:06 +01:00
|
|
|
* Portions Copyright (c) 1994, Regents of the University of California
|
|
|
|
*
|
2010-09-20 22:08:53 +02:00
|
|
|
* src/include/access/xlogutils.h
|
XLOG (and related) changes:
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
2001-03-13 02:17:06 +01:00
|
|
|
*/
|
2000-10-25 02:49:14 +02:00
|
|
|
#ifndef XLOG_UTILS_H
|
2001-03-22 05:01:46 +01:00
|
|
|
#define XLOG_UTILS_H
|
2000-10-25 02:49:14 +02:00
|
|
|
|
Revamp the WAL record format.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
2014-11-20 16:56:26 +01:00
|
|
|
#include "access/xlogreader.h"
|
Unite ReadBufferWithFork, ReadBufferWithStrategy, and ZeroOrReadBuffer
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
2008-10-31 16:05:00 +01:00
|
|
|
#include "storage/bufmgr.h"
|
2000-10-25 02:49:14 +02:00
|
|
|
|
|
|
|
|
2011-12-02 09:49:54 +01:00
|
|
|
extern bool XLogHaveInvalidPages(void);
|
2006-04-14 22:27:24 +02:00
|
|
|
extern void XLogCheckInvalidPages(void);
|
2000-10-28 18:21:00 +02:00
|
|
|
|
2008-08-11 13:05:11 +02:00
|
|
|
extern void XLogDropRelation(RelFileNode rnode, ForkNumber forknum);
|
2006-03-29 23:17:39 +02:00
|
|
|
extern void XLogDropDatabase(Oid dbid);
|
2008-08-11 13:05:11 +02:00
|
|
|
extern void XLogTruncateRelation(RelFileNode rnode, ForkNumber forkNum,
|
2019-05-22 19:04:48 +02:00
|
|
|
BlockNumber nblocks);
|
2004-02-11 23:55:26 +01:00
|
|
|
|
2014-08-13 14:39:08 +02:00
|
|
|
/* Result codes for XLogReadBufferForRedo[Extended] */
|
|
|
|
typedef enum
|
|
|
|
{
|
2015-05-24 03:35:49 +02:00
|
|
|
BLK_NEEDS_REDO, /* changes from WAL record need to be applied */
|
|
|
|
BLK_DONE, /* block is already up-to-date */
|
|
|
|
BLK_RESTORED, /* block was restored from a full-page image */
|
|
|
|
BLK_NOTFOUND /* block was not found (and hence does not
|
|
|
|
* need to be replayed) */
|
2014-08-13 14:39:08 +02:00
|
|
|
} XLogRedoAction;
|
|
|
|
|
Revamp the WAL record format.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
2014-11-20 16:56:26 +01:00
|
|
|
extern XLogRedoAction XLogReadBufferForRedo(XLogReaderState *record,
|
2019-05-22 19:04:48 +02:00
|
|
|
uint8 buffer_id, Buffer *buf);
|
Revamp the WAL record format.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
2014-11-20 16:56:26 +01:00
|
|
|
extern Buffer XLogInitBufferForRedo(XLogReaderState *record, uint8 block_id);
|
|
|
|
extern XLogRedoAction XLogReadBufferForRedoExtended(XLogReaderState *record,
|
2019-05-22 19:04:48 +02:00
|
|
|
uint8 buffer_id,
|
|
|
|
ReadBufferMode mode, bool get_cleanup_lock,
|
|
|
|
Buffer *buf);
|
2014-08-13 14:39:08 +02:00
|
|
|
|
Unite ReadBufferWithFork, ReadBufferWithStrategy, and ZeroOrReadBuffer
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
2008-10-31 16:05:00 +01:00
|
|
|
extern Buffer XLogReadBufferExtended(RelFileNode rnode, ForkNumber forknum,
|
2019-05-22 19:04:48 +02:00
|
|
|
BlockNumber blkno, ReadBufferMode mode);
|
2008-06-12 11:12:31 +02:00
|
|
|
|
|
|
|
extern Relation CreateFakeRelcacheEntry(RelFileNode rnode);
|
|
|
|
extern void FreeFakeRelcacheEntry(Relation fakerel);
|
2001-10-28 07:26:15 +01:00
|
|
|
|
2019-05-22 19:04:48 +02:00
|
|
|
extern int read_local_xlog_page(XLogReaderState *state,
|
|
|
|
XLogRecPtr targetPagePtr, int reqLen,
|
2019-09-24 21:08:31 +02:00
|
|
|
XLogRecPtr targetRecPtr, char *cur_page);
|
2020-05-13 18:17:08 +02:00
|
|
|
extern void wal_segment_open(XLogReaderState *state,
|
2020-05-08 21:30:34 +02:00
|
|
|
XLogSegNo nextSegNo,
|
|
|
|
TimeLineID *tli_p);
|
|
|
|
extern void wal_segment_close(XLogReaderState *state);
|
2016-01-21 02:18:58 +01:00
|
|
|
|
2017-03-22 08:05:12 +01:00
|
|
|
extern void XLogReadDetermineTimeline(XLogReaderState *state,
|
2019-05-22 19:04:48 +02:00
|
|
|
XLogRecPtr wantPage, uint32 wantLength);
|
2017-03-22 08:05:12 +01:00
|
|
|
|
2019-11-25 19:04:54 +01:00
|
|
|
extern void WALReadRaiseError(WALReadError *errinfo);
|
|
|
|
|
2000-10-25 02:49:14 +02:00
|
|
|
#endif
|