2009-07-16 19:43:52 +02:00
|
|
|
/*-------------------------------------------------------------------------
|
2008-05-17 03:28:26 +02:00
|
|
|
*
|
2009-07-16 19:43:52 +02:00
|
|
|
* erand48.c
|
|
|
|
*
|
2011-08-03 22:26:40 +02:00
|
|
|
* This file supplies pg_erand48(), pg_lrand48(), and pg_srand48(), which
|
|
|
|
* are just like erand48(), lrand48(), and srand48() except that we use
|
|
|
|
* our own implementation rather than the one provided by the operating
|
2014-05-06 18:12:18 +02:00
|
|
|
* system. We used to test for an operating system version rather than
|
2011-08-03 22:26:40 +02:00
|
|
|
* unconditionally using our own, but (1) some versions of Cygwin have a
|
|
|
|
* buggy erand48() that always returns zero and (2) as of 2011, glibc's
|
|
|
|
* erand48() is strangely coded to be almost-but-not-quite thread-safe,
|
|
|
|
* which doesn't matter for the backend but is important for pgbench.
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
*
|
|
|
|
*
|
|
|
|
* Copyright (c) 1993 Martin Birgmeier
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* You may redistribute unmodified or modified versions of this source
|
|
|
|
* code provided that the above copyright notice and this and the
|
|
|
|
* following conditions are retained.
|
|
|
|
*
|
|
|
|
* This software is provided ``as is'', and comes with no warranties
|
|
|
|
* of any kind. I shall in no event be liable for anything that happens
|
|
|
|
* to anyone/anything when using this software.
|
2009-07-16 19:43:52 +02:00
|
|
|
*
|
|
|
|
* IDENTIFICATION
|
2010-09-20 22:08:53 +02:00
|
|
|
* src/port/erand48.c
|
2009-07-16 19:43:52 +02:00
|
|
|
*
|
|
|
|
*-------------------------------------------------------------------------
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
*/
|
2009-07-16 19:43:52 +02:00
|
|
|
|
|
|
|
#include "c.h"
|
|
|
|
|
|
|
|
#include <math.h>
|
|
|
|
|
Redesign tablesample method API, and do extensive code review.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
2015-07-25 20:39:00 +02:00
|
|
|
#define RAND48_SEED_0 (0x330e)
|
|
|
|
#define RAND48_SEED_1 (0xabcd)
|
|
|
|
#define RAND48_SEED_2 (0x1234)
|
2004-08-29 07:07:03 +02:00
|
|
|
#define RAND48_MULT_0 (0xe66d)
|
|
|
|
#define RAND48_MULT_1 (0xdeec)
|
|
|
|
#define RAND48_MULT_2 (0x0005)
|
|
|
|
#define RAND48_ADD (0x000b)
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
|
2009-07-16 19:43:52 +02:00
|
|
|
static unsigned short _rand48_seed[3] = {
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
RAND48_SEED_0,
|
|
|
|
RAND48_SEED_1,
|
|
|
|
RAND48_SEED_2
|
|
|
|
};
|
2009-07-16 19:43:52 +02:00
|
|
|
static unsigned short _rand48_mult[3] = {
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
RAND48_MULT_0,
|
|
|
|
RAND48_MULT_1,
|
|
|
|
RAND48_MULT_2
|
|
|
|
};
|
2009-07-16 19:43:52 +02:00
|
|
|
static unsigned short _rand48_add = RAND48_ADD;
|
|
|
|
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
|
2004-04-19 19:42:59 +02:00
|
|
|
static void
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
_dorand48(unsigned short xseed[3])
|
|
|
|
{
|
|
|
|
unsigned long accu;
|
|
|
|
unsigned short temp[2];
|
|
|
|
|
|
|
|
accu = (unsigned long) _rand48_mult[0] * (unsigned long) xseed[0] +
|
2004-08-29 07:07:03 +02:00
|
|
|
(unsigned long) _rand48_add;
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
temp[0] = (unsigned short) accu; /* lower 16 bits */
|
|
|
|
accu >>= sizeof(unsigned short) * 8;
|
|
|
|
accu += (unsigned long) _rand48_mult[0] * (unsigned long) xseed[1] +
|
2004-08-29 07:07:03 +02:00
|
|
|
(unsigned long) _rand48_mult[1] * (unsigned long) xseed[0];
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
temp[1] = (unsigned short) accu; /* middle 16 bits */
|
|
|
|
accu >>= sizeof(unsigned short) * 8;
|
|
|
|
accu += _rand48_mult[0] * xseed[2] + _rand48_mult[1] * xseed[1] + _rand48_mult[2] * xseed[0];
|
|
|
|
xseed[0] = temp[0];
|
|
|
|
xseed[1] = temp[1];
|
|
|
|
xseed[2] = (unsigned short) accu;
|
|
|
|
}
|
|
|
|
|
2009-07-16 19:43:52 +02:00
|
|
|
|
|
|
|
double
|
2011-08-03 22:26:40 +02:00
|
|
|
pg_erand48(unsigned short xseed[3])
|
2009-07-16 19:43:52 +02:00
|
|
|
{
|
|
|
|
_dorand48(xseed);
|
|
|
|
return ldexp((double) xseed[0], -48) +
|
|
|
|
ldexp((double) xseed[1], -32) +
|
|
|
|
ldexp((double) xseed[2], -16);
|
|
|
|
}
|
|
|
|
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
long
|
2011-08-03 22:26:40 +02:00
|
|
|
pg_lrand48(void)
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
{
|
|
|
|
_dorand48(_rand48_seed);
|
2005-08-23 15:31:11 +02:00
|
|
|
return ((long) _rand48_seed[2] << 15) + ((long) _rand48_seed[1] >> 1);
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
}
|
|
|
|
|
Replace PostmasterRandom() with a stronger source, second attempt.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
2016-12-05 12:42:59 +01:00
|
|
|
long
|
|
|
|
pg_jrand48(unsigned short xseed[3])
|
|
|
|
{
|
|
|
|
_dorand48(xseed);
|
|
|
|
return ((long) xseed[2] << 16) + ((long) xseed[1]);
|
|
|
|
}
|
|
|
|
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
void
|
2011-08-03 22:26:40 +02:00
|
|
|
pg_srand48(long seed)
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
{
|
|
|
|
_rand48_seed[0] = RAND48_SEED_0;
|
|
|
|
_rand48_seed[1] = (unsigned short) seed;
|
2011-09-03 22:17:34 +02:00
|
|
|
_rand48_seed[2] = (unsigned short) (seed >> 16);
|
Briefly,
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
2004-02-02 01:11:31 +01:00
|
|
|
_rand48_mult[0] = RAND48_MULT_0;
|
|
|
|
_rand48_mult[1] = RAND48_MULT_1;
|
|
|
|
_rand48_mult[2] = RAND48_MULT_2;
|
|
|
|
_rand48_add = RAND48_ADD;
|
|
|
|
}
|