Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
-- Generic extended statistics support
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
-- We will be checking execution plans without/with statistics, so
|
|
|
|
-- let's make sure we get simple non-parallel plans. Also set the
|
|
|
|
-- work_mem low so that we can use small amounts of data.
|
|
|
|
SET max_parallel_workers = 0;
|
|
|
|
SET max_parallel_workers_per_gather = 0;
|
|
|
|
SET work_mem = '128kB';
|
|
|
|
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
-- Verify failures
|
|
|
|
CREATE STATISTICS tst;
|
|
|
|
CREATE STATISTICS tst ON a, b;
|
|
|
|
CREATE STATISTICS tst FROM sometab;
|
|
|
|
CREATE STATISTICS tst ON a, b FROM nonexistant;
|
|
|
|
CREATE STATISTICS tst ON a, b FROM pg_class;
|
|
|
|
CREATE STATISTICS tst ON relname, relname, relnatts FROM pg_class;
|
|
|
|
CREATE STATISTICS tst ON relnatts + relpages FROM pg_class;
|
|
|
|
CREATE STATISTICS tst ON (relpages, reltuples) FROM pg_class;
|
|
|
|
CREATE STATISTICS tst (unrecognized) ON relname, relnatts FROM pg_class;
|
|
|
|
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
-- Ensure stats are dropped sanely
|
|
|
|
CREATE TABLE ab1 (a INTEGER, b INTEGER, c INTEGER);
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS ab1_a_b_stats ON a, b FROM ab1;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
DROP STATISTICS ab1_a_b_stats;
|
|
|
|
|
|
|
|
CREATE SCHEMA regress_schema_2;
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS regress_schema_2.ab1_a_b_stats ON a, b FROM ab1;
|
2017-03-27 05:53:59 +02:00
|
|
|
|
2017-05-14 16:54:47 +02:00
|
|
|
-- Let's also verify the pg_get_statisticsobjdef output looks sane.
|
|
|
|
SELECT pg_get_statisticsobjdef(oid) FROM pg_statistic_ext WHERE stxname = 'ab1_a_b_stats';
|
2017-03-27 05:53:59 +02:00
|
|
|
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
DROP STATISTICS regress_schema_2.ab1_a_b_stats;
|
|
|
|
|
|
|
|
-- Ensure statistics are dropped when columns are
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS ab1_b_c_stats ON b, c FROM ab1;
|
|
|
|
CREATE STATISTICS ab1_a_b_c_stats ON a, b, c FROM ab1;
|
2017-05-12 22:26:31 +02:00
|
|
|
CREATE STATISTICS ab1_b_a_stats ON b, a FROM ab1;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
ALTER TABLE ab1 DROP COLUMN a;
|
|
|
|
\d ab1
|
2017-05-12 22:26:31 +02:00
|
|
|
-- Ensure statistics are dropped when table is
|
|
|
|
SELECT stxname FROM pg_statistic_ext WHERE stxname LIKE 'ab1%';
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
DROP TABLE ab1;
|
2017-05-12 22:26:31 +02:00
|
|
|
SELECT stxname FROM pg_statistic_ext WHERE stxname LIKE 'ab1%';
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
|
|
|
-- Ensure things work sanely with SET STATISTICS 0
|
|
|
|
CREATE TABLE ab1 (a INTEGER, b INTEGER);
|
|
|
|
ALTER TABLE ab1 ALTER a SET STATISTICS 0;
|
|
|
|
INSERT INTO ab1 SELECT a, a%23 FROM generate_series(1, 1000) a;
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS ab1_a_b_stats ON a, b FROM ab1;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
ANALYZE ab1;
|
|
|
|
ALTER TABLE ab1 ALTER a SET STATISTICS -1;
|
2017-04-17 19:00:47 +02:00
|
|
|
-- partial analyze doesn't build stats either
|
|
|
|
ANALYZE ab1 (a);
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
ANALYZE ab1;
|
|
|
|
DROP TABLE ab1;
|
|
|
|
|
2017-04-17 22:55:17 +02:00
|
|
|
-- Verify supported object types for extended statistics
|
|
|
|
CREATE schema tststats;
|
|
|
|
|
|
|
|
CREATE TABLE tststats.t (a int, b int, c text);
|
|
|
|
CREATE INDEX ti ON tststats.t (a, b);
|
|
|
|
CREATE SEQUENCE tststats.s;
|
|
|
|
CREATE VIEW tststats.v AS SELECT * FROM tststats.t;
|
|
|
|
CREATE MATERIALIZED VIEW tststats.mv AS SELECT * FROM tststats.t;
|
|
|
|
CREATE TYPE tststats.ty AS (a int, b int, c text);
|
|
|
|
CREATE FOREIGN DATA WRAPPER extstats_dummy_fdw;
|
|
|
|
CREATE SERVER extstats_dummy_srv FOREIGN DATA WRAPPER extstats_dummy_fdw;
|
|
|
|
CREATE FOREIGN TABLE tststats.f (a int, b int, c text) SERVER extstats_dummy_srv;
|
|
|
|
CREATE TABLE tststats.pt (a int, b int, c text) PARTITION BY RANGE (a, b);
|
|
|
|
CREATE TABLE tststats.pt1 PARTITION OF tststats.pt FOR VALUES FROM (-10, -10) TO (10, 10);
|
|
|
|
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS tststats.s1 ON a, b FROM tststats.t;
|
|
|
|
CREATE STATISTICS tststats.s2 ON a, b FROM tststats.ti;
|
|
|
|
CREATE STATISTICS tststats.s3 ON a, b FROM tststats.s;
|
|
|
|
CREATE STATISTICS tststats.s4 ON a, b FROM tststats.v;
|
|
|
|
CREATE STATISTICS tststats.s5 ON a, b FROM tststats.mv;
|
|
|
|
CREATE STATISTICS tststats.s6 ON a, b FROM tststats.ty;
|
|
|
|
CREATE STATISTICS tststats.s7 ON a, b FROM tststats.f;
|
|
|
|
CREATE STATISTICS tststats.s8 ON a, b FROM tststats.pt;
|
|
|
|
CREATE STATISTICS tststats.s9 ON a, b FROM tststats.pt1;
|
2017-04-17 22:55:17 +02:00
|
|
|
DO $$
|
|
|
|
DECLARE
|
|
|
|
relname text := reltoastrelid::regclass FROM pg_class WHERE oid = 'tststats.t'::regclass;
|
|
|
|
BEGIN
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
EXECUTE 'CREATE STATISTICS tststats.s10 ON a, b FROM ' || relname;
|
2017-04-17 22:55:17 +02:00
|
|
|
EXCEPTION WHEN wrong_object_type THEN
|
|
|
|
RAISE NOTICE 'stats on toast table not created';
|
|
|
|
END;
|
|
|
|
$$;
|
|
|
|
|
|
|
|
SET client_min_messages TO warning;
|
|
|
|
DROP SCHEMA tststats CASCADE;
|
|
|
|
DROP FOREIGN DATA WRAPPER extstats_dummy_fdw CASCADE;
|
|
|
|
RESET client_min_messages;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
|
|
|
-- n-distinct tests
|
|
|
|
CREATE TABLE ndistinct (
|
|
|
|
filler1 TEXT,
|
|
|
|
filler2 NUMERIC,
|
|
|
|
a INT,
|
|
|
|
b INT,
|
|
|
|
filler3 DATE,
|
|
|
|
c INT,
|
|
|
|
d INT
|
|
|
|
);
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
-- over-estimates when using only per-column statistics
|
|
|
|
INSERT INTO ndistinct (a, b, c, filler1)
|
|
|
|
SELECT i/100, i/100, i/100, cash_words((i/100)::money)
|
|
|
|
FROM generate_series(1,30000) s(i);
|
|
|
|
|
|
|
|
ANALYZE ndistinct;
|
|
|
|
|
|
|
|
-- Group Aggregate, due to over-estimate of the number of groups
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c, d;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c, d;
|
|
|
|
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
-- correct command
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS s10 ON a, b, c FROM ndistinct;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
ANALYZE ndistinct;
|
|
|
|
|
2017-04-17 23:34:29 +02:00
|
|
|
SELECT stxkind, stxndistinct
|
|
|
|
FROM pg_statistic_ext WHERE stxrelid = 'ndistinct'::regclass;
|
2017-03-27 17:40:42 +02:00
|
|
|
|
|
|
|
-- Hash Aggregate, thanks to estimates improved by the statistic
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c;
|
|
|
|
|
|
|
|
-- last two plans keep using Group Aggregate, because 'd' is not covered
|
|
|
|
-- by the statistic and while it's NULL-only we assume 200 values for it
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c, d;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c, d;
|
|
|
|
|
|
|
|
TRUNCATE TABLE ndistinct;
|
|
|
|
|
|
|
|
-- under-estimates when using only per-column statistics
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
INSERT INTO ndistinct (a, b, c, filler1)
|
2017-03-27 17:40:42 +02:00
|
|
|
SELECT mod(i,50), mod(i,51), mod(i,32),
|
|
|
|
cash_words(mod(i,33)::int::money)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
FROM generate_series(1,10000) s(i);
|
|
|
|
|
|
|
|
ANALYZE ndistinct;
|
|
|
|
|
2017-04-17 23:34:29 +02:00
|
|
|
SELECT stxkind, stxndistinct
|
|
|
|
FROM pg_statistic_ext WHERE stxrelid = 'ndistinct'::regclass;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
-- plans using Group Aggregate, thanks to using correct esimates
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c, d;
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c, d;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, d;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
DROP STATISTICS s10;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-04-17 23:34:29 +02:00
|
|
|
SELECT stxkind, stxndistinct
|
|
|
|
FROM pg_statistic_ext WHERE stxrelid = 'ndistinct'::regclass;
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
-- dropping the statistics switches the plans to Hash Aggregate,
|
|
|
|
-- due to under-estimates
|
|
|
|
EXPLAIN (COSTS off)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b;
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c;
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, b, c, d;
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY b, c, d;
|
|
|
|
|
2017-03-27 17:40:42 +02:00
|
|
|
EXPLAIN (COSTS off)
|
Implement multivariate n-distinct coefficients
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
2017-03-24 18:06:10 +01:00
|
|
|
SELECT COUNT(*) FROM ndistinct GROUP BY a, d;
|
|
|
|
|
2017-04-06 00:00:42 +02:00
|
|
|
-- functional dependencies tests
|
|
|
|
CREATE TABLE functional_dependencies (
|
|
|
|
filler1 TEXT,
|
|
|
|
filler2 NUMERIC,
|
|
|
|
a INT,
|
|
|
|
b TEXT,
|
|
|
|
filler3 DATE,
|
|
|
|
c INT,
|
|
|
|
d TEXT
|
|
|
|
);
|
|
|
|
|
|
|
|
SET random_page_cost = 1.2;
|
|
|
|
|
|
|
|
CREATE INDEX fdeps_ab_idx ON functional_dependencies (a, b);
|
|
|
|
CREATE INDEX fdeps_abc_idx ON functional_dependencies (a, b, c);
|
|
|
|
|
|
|
|
-- random data (no functional dependencies)
|
|
|
|
INSERT INTO functional_dependencies (a, b, c, filler1)
|
|
|
|
SELECT mod(i, 23), mod(i, 29), mod(i, 31), i FROM generate_series(1,5000) s(i);
|
|
|
|
|
|
|
|
ANALYZE functional_dependencies;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1';
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1' AND c = 1;
|
|
|
|
|
|
|
|
-- create statistics
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS func_deps_stat (dependencies) ON a, b, c FROM functional_dependencies;
|
2017-04-06 00:00:42 +02:00
|
|
|
|
|
|
|
ANALYZE functional_dependencies;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1';
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1' AND c = 1;
|
|
|
|
|
|
|
|
-- a => b, a => c, b => c
|
|
|
|
TRUNCATE functional_dependencies;
|
|
|
|
DROP STATISTICS func_deps_stat;
|
|
|
|
|
|
|
|
INSERT INTO functional_dependencies (a, b, c, filler1)
|
|
|
|
SELECT mod(i,100), mod(i,50), mod(i,25), i FROM generate_series(1,5000) s(i);
|
|
|
|
|
|
|
|
ANALYZE functional_dependencies;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1';
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1' AND c = 1;
|
|
|
|
|
|
|
|
-- create statistics
|
Change CREATE STATISTICS syntax
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
2017-05-12 19:59:23 +02:00
|
|
|
CREATE STATISTICS func_deps_stat (dependencies) ON a, b, c FROM functional_dependencies;
|
2017-04-06 00:00:42 +02:00
|
|
|
|
|
|
|
ANALYZE functional_dependencies;
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1';
|
|
|
|
|
|
|
|
EXPLAIN (COSTS OFF)
|
|
|
|
SELECT * FROM functional_dependencies WHERE a = 1 AND b = '1' AND c = 1;
|
|
|
|
|
|
|
|
RESET random_page_cost;
|