postgresql/src/backend/libpq/pg_hba.conf.sample

# 
#		  PostgreSQL HOST-BASED ACCESS (HBA) CONTROL FILE
# 
# 
# This file controls:
# 
# 	o which hosts are allowed to connect
# 	o how users are authenticated on each host
# 	o databases accessible by each host
# 
# It is read by the PostgreSQL postmaster each time a host tries to make a
# connection to a database.
# 
# Each line is a new record. Records cannot be continued across multiple
# lines. Lines beginning with # (comments) and blank lines are ignored. A
# record consists of tokens separated by multiple spaces or tabs.
# 
# The first token of a record indicates its type. The remainder of the
# record is interpreted based on its type.
# 
# Record Types
# ============
# 
# There are three types of records:
# 
# 	o host
# 	o hostssl
# 	o local
# 
# host
# ----
# 
# This record identifies the networked hosts that are permitted to connect
# via IP connections.
# 
# Format:
# 
#   host  DBNAME  IP_ADDRESS  ADDRESS_MASK  AUTH_TYPE  [AUTH_ARGUMENT]
# 
# DBNAME can be:
# 
# 	o the name of a PostgreSQL database
# 	o "all" to indicate all databases
# 	o "sameuser" to allow access only to databases with the same
# 	  name as the connecting user
# 
# IP_ADDRESS and ADDRESS_MASK are standard dotted decimal IP address and
# mask values. IP addresses can only be specified numerically, not as
# domain or host names.
# 
# AUTH_TYPE and AUTH_ARGUMENT are described below.
# 
# There can be multiple "host" records, possibly with overlapping sets of
# host addresses. The postmaster finds the first entry that matches the
# connecting host IP address and the requested database name. If no entry
# matches the database/hostname combination, the connection is rejected.
# 
# 
# hostssl
# -------
# 
# The format of this record is identical to "host".
# 
# This record identifies a set of network hosts that are permitted to
# connect to databases over secure SSL IP connections. Note that a "host"
# record will also allow SSL connections.  "hostssl" forces these
# hosts to use *only* SSL-secured connections.
# 
# This keyword is only available if the server was compiled with SSL
# support enabled.
# 
# 
# local
# -----
# 
# This record identifies the authentication to use when connecting to
# the server via a local UNIX domain socket.  UNIX-socket connections are
# allowed only if this record type appears.
# 
# Format:
# 
#   local  DBNAME  AUTH_TYPE  [AUTH_ARGUMENT]
# 
# This format is identical to the "host" record type except the IP_ADDRESS
# and ADDRESS_MASK fields are omitted.
# 
# As with "host" records, the first "local" record matching the requested
# database name is used.
# 
# 
# 
# Authentication Types (AUTH_TYPE)
# ================================
# 
# AUTH_TYPE indicates the method used to authenticate users. The username
# is specified in the connection request.  A different AUTH_TYPE can be
# specified for each record in the file.
# 
#   trust:  	No authentication is done. Any valid username is accepted,
# 		including the PostgreSQL superuser. This option should
# 		be use only for machines where all users are truested.
# 
#   password:	Authentication is done by matching a password supplied
#		in clear by the host. If no AUTH_ARGUMENT is used, the
#		password is compared with the user's entry in the
#		pg_shadow table.
# 
# 		If AUTH_ARGUMENT is specified, the username is looked up
# 		in that file in the $PGDATA directory. If the username
# 		exists but there is no password, the password is looked
# 		up in pg_shadow. If a password exists in the file, it is
# 		it used instead. These secondary files allow fine-grained
# 		control over who can access which databases and whether
# 		a non-default passwords are required. The same file can be
# 		used in multiple records for easier administration.
# 		Password files can be maintained with the pg_passwd(1)
# 		utility. Remember, these passwords override pg_shadow
# 		passwords.
# 
#   crypt:  	Same as "password", but authentication is done by
#		encrypting the password sent over the network. This is
#		always preferable to "password" except for old clients
#		that don't support "crypt". Also, crypt can use
#		usernames stored in secondary password files but not
#		secondary passwords.
# 
#   ident:	Authentication is done by the ident server on the local
#		(127.0.0.1) or remote host. AUTH_ARGUMENT is required and
#		maps names found in the $PGDATA/pg_ident.conf file. The 
#		connection is accepted if the file contains an entry for
#		this map name with the ident-supplied username and the 
#		requested PostgreSQL username. The special map name 
#		"sameuser" indicates an implied map (not in pg_ident.conf)
#		that maps each ident username to the identical PostgreSQL 
#		username.
# 
#   krb4:	Kerberos V4 authentication is used.
# 
#   krb5:	Kerberos V5 authentication is used.
# 
#   reject: 	Reject the connection. This is used to reject certain hosts
#		that are part of a network specified later in the file.
#		To be effective, "reject" must appear before the later
#		entries.
# 
# Local UNIX-domain socket connections support only the AUTH_TYPEs of
# "trust", "password", "crypt", and "reject".
# 
# 
# 
# Examples
# ========
# 
# 
# Allow any user on the local system to connect to any database under any
# username using Unix-domain sockets (the default for local connections):
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# local      all                                          trust
# 
# The same using IP connections on the same machine:
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# host       all         127.0.0.1     255.255.255.255    trust     
# 
# Allow any user from any host with IP address 192.168.93.x to
# connect to database "template1" as the same username that ident reports
# for the connection (typically his Unix username):
# 
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# host       template1   192.168.93.0  255.255.255.0      ident      sameuser
# 
# Allow a user from host 192.168.12.10 to connect to database "template1"
# if the user's password in pg_shadow is correctly supplied:
# 
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# host       template1   192.168.12.10 255.255.255.255    crypt
# 
# In the absence of preceding "host" lines, these two lines will reject
# all connection from 192.168.54.1 (since that entry will be matched
# first), but allow Kerberos V5-validated connections from anywhere else
# on the Internet. The zero mask means that no bits of the host IP address
# are considered, so it matches any host:
# 
# 
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# host       all        192.168.54.1   255.255.255.255    reject
# host       all        0.0.0.0        0.0.0.0            krb5
# 
# Allow users from 192.168.x.x hosts to connect to any database if they
# pass the ident check. For example, if ident says the user is "james" and
# he requests to connect as PostgreSQL user "guest", the connection is
# allowed if there is an entry in $PGDATA/pg_ident.conf with map name 
# "phoenix" that says "james" is allowed to connect as "guest":
# 
# TYPE       DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT
# host       all        192.168.0.0    255.255.0.0        ident      phoenix
# 
# See $PGDATA/pg_ident.conf for more information on Ident maps.
# 
# Put your actual configuration here
# ==================================
# 
# This default configuration allows any local user to connect with any
# PostgreSQL username, over either UNIX domain sockets or IP:
# 
# If you want to allow non-local connections, you will need to add more
# "host" records. Also, remember IP connections are only enabled if you
# start the postmaster with the -i option.
# 
# CAUTION: if you are on a multiple-user machine, the default
# configuration is probably too liberal for you. Change it to use
# something other than "trust" authentication.
# 
# TYPE     DATABASE    IP_ADDRESS    MASK               AUTH_TYPE  AUTH_ARGUMENT

local      all                                          trust
host       all         127.0.0.1     255.255.255.255    trust