postgresql/src/backend/libpq/be-secure.c

183 lines
3.1 KiB
C
Raw Normal View History

UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/*-------------------------------------------------------------------------
*
* be-secure.c
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
* functions related to setting up a secure connection to the frontend.
* Secure connections are expected to provide confidentiality,
* message integrity and endpoint authentication.
*
*
* Portions Copyright (c) 1996-2014, PostgreSQL Global Development Group
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
* Portions Copyright (c) 1994, Regents of the University of California
*
*
* IDENTIFICATION
2010-09-20 22:08:53 +02:00
* src/backend/libpq/be-secure.c
*
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
*-------------------------------------------------------------------------
*/
#include "postgres.h"
#include <sys/stat.h>
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#include <signal.h>
#include <fcntl.h>
#include <ctype.h>
#include <sys/socket.h>
#include <unistd.h>
#include <netdb.h>
#include <netinet/in.h>
#ifdef HAVE_NETINET_TCP_H
#include <netinet/tcp.h>
#include <arpa/inet.h>
#endif
#include "libpq/libpq.h"
#include "tcop/tcopprot.h"
#include "utils/memutils.h"
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
char *ssl_cert_file;
char *ssl_key_file;
char *ssl_ca_file;
char *ssl_crl_file;
/*
* How much data can be sent across a secure connection
* (total in both directions) before we require renegotiation.
* Set to 0 to disable renegotiation completely.
*/
2010-02-26 03:01:40 +01:00
int ssl_renegotiation_limit;
#ifdef USE_SSL
bool ssl_loaded_verify_locations = false;
#endif
2007-02-16 18:07:00 +01:00
/* GUC variable controlling SSL cipher list */
2007-11-15 22:14:46 +01:00
char *SSLCipherSuites = NULL;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/* GUC variable for default ECHD curve. */
char *SSLECDHCurve;
/* GUC variable: if false, prefer client ciphers */
bool SSLPreferServerCiphers;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/* ------------------------------------------------------------ */
2002-09-04 22:31:48 +02:00
/* Procedures common to all secure sessions */
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/* ------------------------------------------------------------ */
/*
* Initialize global context
*/
int
2002-09-04 22:31:48 +02:00
secure_initialize(void)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
#ifdef USE_SSL
be_tls_init();
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#endif
return 0;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
}
/*
* Indicate if we have loaded the root CA store to verify certificates
*/
bool
secure_loaded_verify_locations(void)
{
#ifdef USE_SSL
return ssl_loaded_verify_locations;
#else
return false;
#endif
}
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/*
* Attempt to negotiate secure session.
*/
int
2002-09-04 22:31:48 +02:00
secure_open_server(Port *port)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
2002-09-04 22:31:48 +02:00
int r = 0;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#ifdef USE_SSL
r = be_tls_open_server(port);
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#endif
return r;
}
/*
* Close secure session.
*/
void
2002-09-04 22:31:48 +02:00
secure_close(Port *port)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
#ifdef USE_SSL
if (port->ssl_in_use)
be_tls_close(port);
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#endif
}
/*
* Read data from a secure connection.
*/
ssize_t
2002-09-04 22:31:48 +02:00
secure_read(Port *port, void *ptr, size_t len)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
2002-09-04 22:31:48 +02:00
ssize_t n;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
#ifdef USE_SSL
if (port->ssl_in_use)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
n = be_tls_read(port, ptr, len);
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
}
else
#endif
{
n = secure_raw_read(port, ptr, len);
}
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
return n;
}
ssize_t
secure_raw_read(Port *port, void *ptr, size_t len)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
2002-09-04 22:31:48 +02:00
ssize_t n;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
prepare_for_client_read();
n = recv(port->sock, ptr, len, 0);
client_read_ended();
return n;
}
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
/*
* Write data to a secure connection.
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
*/
ssize_t
secure_write(Port *port, void *ptr, size_t len)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
ssize_t n;
#ifdef USE_SSL
if (port->ssl_in_use)
{
n = be_tls_write(port, ptr, len);
}
else
#endif
n = secure_raw_write(port, ptr, len);
return n;
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
}
ssize_t
secure_raw_write(Port *port, const void *ptr, size_t len)
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
{
return send(port->sock, ptr, len, 0);
UPDATED PATCH: Attached are a revised set of SSL patches. Many of these patches are motivated by security concerns, it's not just bug fixes. The key differences (from stock 7.2.1) are: *) almost all code that directly uses the OpenSSL library is in two new files, src/interfaces/libpq/fe-ssl.c src/backend/postmaster/be-ssl.c in the long run, it would be nice to merge these two files. *) the legacy code to read and write network data have been encapsulated into read_SSL() and write_SSL(). These functions should probably be renamed - they handle both SSL and non-SSL cases. the remaining code should eliminate the problems identified earlier, albeit not very cleanly. *) both front- and back-ends will send a SSL shutdown via the new close_SSL() function. This is necessary for sessions to work properly. (Sessions are not yet fully supported, but by cleanly closing the SSL connection instead of just sending a TCP FIN packet other SSL tools will be much happier.) *) The client certificate and key are now expected in a subdirectory of the user's home directory. Specifically, - the directory .postgresql must be owned by the user, and allow no access by 'group' or 'other.' - the file .postgresql/postgresql.crt must be a regular file owned by the user. - the file .postgresql/postgresql.key must be a regular file owned by the user, and allow no access by 'group' or 'other'. At the current time encrypted private keys are not supported. There should also be a way to support multiple client certs/keys. *) the front-end performs minimal validation of the back-end cert. Self-signed certs are permitted, but the common name *must* match the hostname used by the front-end. (The cert itself should always use a fully qualified domain name (FDQN) in its common name field.) This means that psql -h eris db will fail, but psql -h eris.example.com db will succeed. At the current time this must be an exact match; future patches may support any FQDN that resolves to the address returned by getpeername(2). Another common "problem" is expiring certs. For now, it may be a good idea to use a very-long-lived self-signed cert. As a compile-time option, the front-end can specify a file containing valid root certificates, but it is not yet required. *) the back-end performs minimal validation of the client cert. It allows self-signed certs. It checks for expiration. It supports a compile-time option specifying a file containing valid root certificates. *) both front- and back-ends default to TLSv1, not SSLv3/SSLv2. *) both front- and back-ends support DSA keys. DSA keys are moderately more expensive on startup, but many people consider them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.) *) if /dev/urandom exists, both client and server will read 16k of randomization data from it. *) the server can read empheral DH parameters from the files $DataDir/dh512.pem $DataDir/dh1024.pem $DataDir/dh2048.pem $DataDir/dh4096.pem if none are provided, the server will default to hardcoded parameter files provided by the OpenSSL project. Remaining tasks: *) the select() clauses need to be revisited - the SSL abstraction layer may need to absorb more of the current code to avoid rare deadlock conditions. This also touches on a true solution to the pg_eof() problem. *) the SIGPIPE signal handler may need to be revisited. *) support encrypted private keys. *) sessions are not yet fully supported. (SSL sessions can span multiple "connections," and allow the client and server to avoid costly renegotiations.) *) makecert - a script that creates back-end certs. *) pgkeygen - a tool that creates front-end certs. *) the whole protocol issue, SASL, etc. *) certs are fully validated - valid root certs must be available. This is a hassle, but it means that you *can* trust the identity of the server. *) the client library can handle hardcoded root certificates, to avoid the need to copy these files. *) host name of server cert must resolve to IP address, or be a recognized alias. This is more liberal than the previous iteration. *) the number of bytes transferred is tracked, and the session key is periodically renegotiated. *) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The configuration files have reasonable defaults for each type of use. Bear Giles
2002-06-14 06:23:17 +02:00
}