From 0bc2a8ca6556de179468b4eea84cb67b38322414 Mon Sep 17 00:00:00 2001 From: Peter Eisentraut Date: Thu, 6 Apr 2006 18:54:37 +0000 Subject: [PATCH] Build src/test/regress/README during tarball making like the other generated text files. Fix build of that file, too. Put the text files in the right place during make dist, so there are no extra manual steps required anymore. --- GNUmakefile.in | 6 +- doc/src/sgml/Makefile | 5 +- doc/src/sgml/regress.sgml | 6 +- src/test/regress/README | 278 -------------------------------------- 4 files changed, 12 insertions(+), 283 deletions(-) delete mode 100644 src/test/regress/README diff --git a/GNUmakefile.in b/GNUmakefile.in index 9065bc9864..521b47b127 100644 --- a/GNUmakefile.in +++ b/GNUmakefile.in @@ -1,7 +1,7 @@ # # PostgreSQL top level makefile # -# $PostgreSQL: pgsql/GNUmakefile.in,v 1.43 2006/04/03 18:47:41 petere Exp $ +# $PostgreSQL: pgsql/GNUmakefile.in,v 1.44 2006/04/06 18:54:36 petere Exp $ # subdir = @@ -108,6 +108,10 @@ distdir: fi || exit; \ done $(MAKE) -C $(distdir) distprep + $(MAKE) -C $(distdir)/doc/src/sgml/ HISTORY INSTALL regress_README + cp $(distdir)/doc/src/sgml/HISTORY $(distdir)/ + cp $(distdir)/doc/src/sgml/INSTALL $(distdir)/ + cp $(distdir)/doc/src/sgml/regress_README $(distdir)/src/test/regress/README $(MAKE) -C $(distdir) distclean rm -f $(distdir)/README.CVS diff --git a/doc/src/sgml/Makefile b/doc/src/sgml/Makefile index b506fc6646..037c875b84 100644 --- a/doc/src/sgml/Makefile +++ b/doc/src/sgml/Makefile @@ -2,7 +2,7 @@ # # PostgreSQL documentation makefile # -# $PostgreSQL: pgsql/doc/src/sgml/Makefile,v 1.75 2005/01/04 21:03:30 petere Exp $ +# $PostgreSQL: pgsql/doc/src/sgml/Makefile,v 1.76 2006/04/06 18:54:36 petere Exp $ # #---------------------------------------------------------------------------- @@ -196,7 +196,8 @@ HISTORY.html: release.sgml regress_README.html: regress.sgml ( echo ' ]>'; \ + echo ''; \ + echo ' ]>'; \ cat $< ) >tempfile_regress_README.sgml $(JADE.text) -V nochunks tempfile_regress_README.sgml >$@ rm tempfile_regress_README.sgml diff --git a/doc/src/sgml/regress.sgml b/doc/src/sgml/regress.sgml index 11f9468860..0b5ddf4ac4 100644 --- a/doc/src/sgml/regress.sgml +++ b/doc/src/sgml/regress.sgml @@ -1,4 +1,4 @@ - + Regression Tests @@ -313,7 +313,9 @@ exclusion of those that don't. If the errors test results in a server crash at the select infinite_recurse() command, it means that the platform's limit on process stack size is smaller than the - parameter indicates. This + ]]> + max_stack_depth]]> + parameter indicates. This can be fixed by running the postmaster under a higher stack size limit (4MB is recommended with the default value of max_stack_depth). If you are unable to do that, an diff --git a/src/test/regress/README b/src/test/regress/README deleted file mode 100644 index dc3000cff3..0000000000 --- a/src/test/regress/README +++ /dev/null @@ -1,278 +0,0 @@ - - Regression Tests - - The regression tests are a comprehensive set of tests for the SQL - implementation in PostgreSQL. They test standard SQL operations as - well as the extended capabilities of PostgreSQL. - _________________________________________________________________ - - Running the Tests - - The regression tests can be run against an already installed and - running server, or using a temporary installation within the build - tree. Furthermore, there is a "parallel" and a "sequential" mode for - running the tests. The sequential method runs each test script in - turn, whereas the parallel method starts up multiple server processes - to run groups of tests in parallel. Parallel testing gives confidence - that interprocess communication and locking are working correctly. For - historical reasons, the sequential test is usually run against an - existing installation and the parallel method against a temporary - installation, but there are no technical reasons for this. - - To run the regression tests after building but before installation, - type -gmake check - - in the top-level directory. (Or you can change to "src/test/regress" - and run the command there.) This will first build several auxiliary - files, such as some sample user-defined trigger functions, and then - run the test driver script. At the end you should see something like -====================== - All 98 tests passed. -====================== - - or otherwise a note about which tests failed. See the section called - Test Evaluation below before assuming that a "failure" represents a - serious problem. - - Because this test method runs a temporary server, it will not work - when you are the root user (since the server will not start as root). - If you already did the build as root, you do not have to start all - over. Instead, make the regression test directory writable by some - other user, log in as that user, and restart the tests. For example -root# chmod -R a+w src/test/regress -root# chmod -R a+w contrib/spi -root# su - joeuser -joeuser$ cd top-level build directory -joeuser$ gmake check - - (The only possible "security risk" here is that other users might be - able to alter the regression test results behind your back. Use common - sense when managing user permissions.) - - Alternatively, run the tests after installation. - - If you have configured PostgreSQL to install into a location where an - older PostgreSQL installation already exists, and you perform gmake - check before installing the new version, you may find that the tests - fail because the new programs try to use the already-installed shared - libraries. (Typical symptoms are complaints about undefined symbols.) - If you wish to run the tests before overwriting the old installation, - you'll need to build with configure --disable-rpath. It is not - recommended that you use this option for the final installation, - however. - - The parallel regression test starts quite a few processes under your - user ID. Presently, the maximum concurrency is twenty parallel test - scripts, which means sixty processes: there's a server process, a - psql, and usually a shell parent process for the psql for each test - script. So if your system enforces a per-user limit on the number of - processes, make sure this limit is at least seventy-five or so, else - you may get random-seeming failures in the parallel test. If you are - not in a position to raise the limit, you can cut down the degree of - parallelism by setting the MAX_CONNECTIONS parameter. For example, -gmake MAX_CONNECTIONS=10 check - - runs no more than ten tests concurrently. - - On some systems, the default Bourne-compatible shell ("/bin/sh") gets - confused when it has to manage too many child processes in parallel. - This may cause the parallel test run to lock up or fail. In such - cases, specify a different Bourne-compatible shell on the command - line, for example: -gmake SHELL=/bin/ksh check - - If no non-broken shell is available, you may be able to work around - the problem by limiting the number of connections, as shown above. - - To run the tests after installation, initialize a data area and start - the server, then type -gmake installcheck - - or for a parallel test -gmake installcheck-parallel - - The tests will expect to contact the server at the local host and the - default port number, unless directed otherwise by PGHOST and PGPORT - environment variables. - _________________________________________________________________ - - Test Evaluation - - Some properly installed and fully functional PostgreSQL installations - can "fail" some of these regression tests due to platform-specific - artifacts such as varying floating-point representation and message - wording. The tests are currently evaluated using a simple "diff" - comparison against the outputs generated on a reference system, so the - results are sensitive to small system differences. When a test is - reported as "failed", always examine the differences between expected - and actual results; you may well find that the differences are not - significant. Nonetheless, we still strive to maintain accurate - reference files across all supported platforms, so it can be expected - that all tests pass. - - The actual outputs of the regression tests are in files in the - "src/test/regress/results" directory. The test script uses "diff" to - compare each output file against the reference outputs stored in the - "src/test/regress/expected" directory. Any differences are saved for - your inspection in "src/test/regress/regression.diffs". (Or you can - run "diff" yourself, if you prefer.) - - If for some reason a particular platform generates a "failure" for a - given test, but inspection of the output convinces you that the result - is valid, you can add a new comparison file to silence the failure - report in future test runs. See the section called Variant Comparison - Files for details. - _________________________________________________________________ - - Error message differences - - Some of the regression tests involve intentional invalid input values. - Error messages can come from either the PostgreSQL code or from the - host platform system routines. In the latter case, the messages may - vary between platforms, but should reflect similar information. These - differences in messages will result in a "failed" regression test that - can be validated by inspection. - _________________________________________________________________ - - Locale differences - - If you run the tests against an already-installed server that was - initialized with a collation-order locale other than C, then there may - be differences due to sort order and follow-up failures. The - regression test suite is set up to handle this problem by providing - alternative result files that together are known to handle a large - number of locales. - _________________________________________________________________ - - Date and time differences - - Most of the date and time results are dependent on the time zone - environment. The reference files are generated for time zone PST8PDT - (Berkeley, California), and there will be apparent failures if the - tests are not run with that time zone setting. The regression test - driver sets environment variable PGTZ to PST8PDT, which normally - ensures proper results. - _________________________________________________________________ - - Floating-point differences - - Some of the tests involve computing 64-bit floating-point numbers - (double precision) from table columns. Differences in results - involving mathematical functions of double precision columns have been - observed. The float8 and geometry tests are particularly prone to - small differences across platforms, or even with different compiler - optimization options. Human eyeball comparison is needed to determine - the real significance of these differences which are usually 10 places - to the right of the decimal point. - - Some systems display minus zero as -0, while others just show 0. - - Some systems signal errors from pow() and exp() differently from the - mechanism expected by the current PostgreSQL code. - _________________________________________________________________ - - Row ordering differences - - You might see differences in which the same rows are output in a - different order than what appears in the expected file. In most cases - this is not, strictly speaking, a bug. Most of the regression test - scripts are not so pedantic as to use an ORDER BY for every single - SELECT, and so their result row orderings are not well-defined - according to the letter of the SQL specification. In practice, since - we are looking at the same queries being executed on the same data by - the same software, we usually get the same result ordering on all - platforms, and so the lack of ORDER BY isn't a problem. Some queries - do exhibit cross-platform ordering differences, however. When testing - against an already-installed server, ordering differences can also be - caused by non-C locale settings or non-default parameter settings, - such as custom values of work_mem or the planner cost parameters. - - Therefore, if you see an ordering difference, it's not something to - worry about, unless the query does have an ORDER BY that your result - is violating. But please report it anyway, so that we can add an ORDER - BY to that particular query and thereby eliminate the bogus "failure" - in future releases. - - You might wonder why we don't order all the regression test queries - explicitly to get rid of this issue once and for all. The reason is - that that would make the regression tests less useful, not more, since - they'd tend to exercise query plan types that produce ordered results - to the exclusion of those that don't. - _________________________________________________________________ - - The "random" test - - The random test script is intended to produce random results. In rare - cases, this causes the random regression test to fail. Typing -diff results/random.out expected/random.out - - should produce only one or a few lines of differences. You need not - worry unless the random test fails repeatedly. - _________________________________________________________________ - - Variant Comparison Files - - Since some of the tests inherently produce environment-dependent - results, we have provided ways to specify alternative "expected" - result files. Each regression test can have several comparison files - showing possible results on different platforms. There are two - independent mechanisms for determining which comparison file is used - for each test. - - The first mechanism allows comparison files to be selected for - specific platforms. There is a mapping file, - "src/test/regress/resultmap", that defines which comparison file to - use for each platform. To eliminate bogus test "failures" for a - particular platform, you first choose or make a variant result file, - and then add a line to the "resultmap" file. - - Each line in the mapping file is of the form -testname/platformpattern=comparisonfilename - - The test name is just the name of the particular regression test - module. The platform pattern is a pattern in the style of the Unix - tool "expr" (that is, a regular expression with an implicit ^ anchor - at the start). It is matched against the platform name as printed by - "config.guess" followed by :gcc or :cc, depending on whether you use - the GNU compiler or the system's native compiler (on systems where - there is a difference). The comparison file name is the base name of - the substitute result comparison file. - - For example: some systems interpret very small floating-point values - as zero, rather than reporting an underflow error. This causes a few - differences in the "float8" regression test. Therefore, we provide a - variant comparison file, "float8-small-is-zero.out", which includes - the results to be expected on these systems. To silence the bogus - "failure" message on OpenBSD platforms, "resultmap" includes -float8/i.86-.*-openbsd=float8-small-is-zero - - which will trigger on any machine for which the output of - "config.guess" matches i.86-.*-openbsd. Other lines in "resultmap" - select the variant comparison file for other platforms where it's - appropriate. - - The second selection mechanism for variant comparison files is much - more automatic: it simply uses the "best match" among several supplied - comparison files. The regression test driver script considers both the - standard comparison file for a test, testname.out, and variant files - named testname_digit.out (where the "digit" is any single digit 0-9). - If any such file is an exact match, the test is considered to pass; - otherwise, the one that generates the shortest diff is used to create - the failure report. (If "resultmap" includes an entry for the - particular test, then the base "testname" is the substitute name given - in "resultmap".) - - For example, for the char test, the comparison file "char.out" - contains results that are expected in the C and POSIX locales, while - the file "char_1.out" contains results sorted as they appear in many - other locales. - - The best-match mechanism was devised to cope with locale-dependent - results, but it can be used in any situation where the test results - cannot be predicted easily from the platform name alone. A limitation - of this mechanism is that the test driver cannot tell which variant is - actually "correct" for the current environment; it will just pick the - variant that seems to work best. Therefore it is safest to use this - mechanism only for variant results that you are willing to consider - equally valid in all contexts.