From 2732075b78288ead4b9482c74f2674b3a397bf2a Mon Sep 17 00:00:00 2001 From: "Marc G. Fournier" Date: Thu, 23 Jan 1997 22:50:14 +0000 Subject: [PATCH] Bring in Nat' preliminary work at autoconf'ng PostgreSQL...I imagine it still needs lots of work, but, hey, at least this way there are more ppl working off the same "Source"... --- src/Makefile.global.in | 757 +++++++++++++ src/Makefile.in | 64 ++ src/configure | 2315 ++++++++++++++++++++++++++++++++++++++++ src/configure.in | 98 ++ 4 files changed, 3234 insertions(+) create mode 100644 src/Makefile.global.in create mode 100644 src/Makefile.in create mode 100755 src/configure create mode 100644 src/configure.in diff --git a/src/Makefile.global.in b/src/Makefile.global.in new file mode 100644 index 0000000000..693b580ef4 --- /dev/null +++ b/src/Makefile.global.in @@ -0,0 +1,757 @@ +#---------------------------------------------------------------------------- +# +# Makefile.global-- +# global configuration for the Makefiles +# +# Copyright (c) 1994, Regents of the University of California +# +# +# IDENTIFICATION +# $Header: /cvsroot/pgsql/src/Makefile.global.in,v 1.1 1997/01/23 22:50:10 scrappy Exp $ +# +# NOTES +# Essentially all Postgres make files include this file and use the +# variables it sets. To +# override the default setting, create a Makefile.custom in this +# directory and put your defines there. (Makefile.custom is included +# near the end of this file.) +# +# If you change any of these defines you probably have to +# make clean; make +# since no dependencies are created for these. (of course you can +# be crafty and check what files really depend on them and just remake +# those). +# +# Before including this file, you must set the SRCDIR variable to the +# path of the top of the Postgres source tree (the directory that +# contains this file). +# +#------------------------------------------------------------------------- + + +############################################################################## +# +# CONFIGURATION SECTION +# +# Following are settings pertaining to the postgres build and +# installation. The most important one is obviously the name +# of the port. + +# The name of the port. Valid choices are: +# alpha DEC Alpha AXP on OSF/1 2.0 +# hpux HP PA-RISC on HP-UX 9.0 +# i386_solaris i386 Solaris +# sparc_solaris SUN SPARC on Solaris 2.4 +# sparc SUN SPARC on SunOS 4.1.3 +# ultrix4 DEC MIPS on Ultrix 4.4 +# linux Intel x86 on Linux 1.2 and Linux ELF +# (For non-ELF Linux, see LINUX_ELF below). +# BSD44_derived OSs derived from 4.4-lite BSD (NetBSD, FreeBSD) +# bsdi BSD/OS 2.0, 2.01, 2.1 +# aix IBM on AIX 3.2.5 +# irix5 SGI MIPS on IRIX 5.3 +# dgux DG/UX 5.4R3.10 +# Some hooks are provided for +# svr4 Intel x86 on Intel SVR4 +# next Motorola MC68K or Intel x86 on NeXTSTEP 3.2 +# but these are guaranteed not to work as of yet. +# +# Note that portname is defined here to be UNDEFINED to remind you +# to change it in Makefile.custom. +# +# make sure that you have no whitespaces after the PORTNAME setting +# or the makefiles can get confused +PORTNAME= UNDEFINED + +# Ignore LINUX_ELF if you're not using Linux. But if you are, and you're +# compiling to a.out (which means you're using the dld dynamic loading +# library), set LINUX_ELF to null in Makefile.custom. +LINUX_ELF= 1 + +LIBPQDIR:= $(SRCDIR)/libpq + +# For convenience, POSTGRESDIR is where DATADIR, BINDIR, and LIBDIR +# and other target destinations are rooted. Of course, each of these is +# changable separately. +POSTGRESDIR= /usr/local/pgsql + +# DATADIR specifies where the postmaster expects to find its database. +# This may be overridden by command line options or the PGDATA environment +# variable. +DATADIR= $(POSTGRESDIR)/data + +# Where the postgres executables live (changeable by just putting them +# somewhere else and putting that directory in your shell PATH) +BINDIR= $(POSTGRESDIR)/bin + +# Where libpq.a gets installed. You must put it where your loader will +# look for it if you wish to use the -lpq convention. Otherwise you +# can just put the absolute pathname to the library at the end of your +# command line. +LIBDIR= $(POSTGRESDIR)/lib + +# This is the directory where IPC utilities ipcs and ipcrm are located +# +IPCS=@ipcs@ +IPCRM=@ipcrm@ +#IPCSDIR= /usr/bin + +# Where the man pages (suitable for use with "man") get installed. +POSTMANDIR= $(POSTGRESDIR)/man + +# Where the formatted documents (e.g., the reference manual) get installed. +POSTDOCDIR= $(POSTGRESDIR)/doc + +# Where the header files necessary to build frontend programs get installed. +HEADERDIR= $(POSTGRESDIR)/include + +# The port to run the postmaster on +POSTPORT= 5432 + +# NAMEDATALEN is the max length for system identifiers (e.g. table names, +# attribute names, function names, etc.) +# +# These MUST be set here. DO NOT COMMENT THESE OUT +# Setting these too high will result in excess space usage for system catalogs +# Setting them too low will make the system unusable. +# values between 16 and 64 that are multiples of four are recommended. +# +# NOTE also that databases with different NAMEDATALEN's cannot interoperate! +# +# THERE ARE REDUNDANT DEFINITIONS OF THESE VALUES IN config.h. +# Don't change anything here without changing it there too. + +NAMEDATALEN= 32 +# OIDNAMELEN should be set to NAMEDATALEN + sizeof(Oid) +OIDNAMELEN= 36 + +############################################################################## +# +# FEATURES +# +# To disable a feature, comment out the entire definition +# (that is, prepend '#', don't set it to "0" or "no"). + +# Compile libpq++ +# NAT: autoconf can check if we have a cplusplus compiler and will +# NAT: define HAVE_Cplusplus for us +#HAVE_Cplusplus= true +@HAVECXX@ + +# Commenting out CASSERT will make things go a LOT faster, but you will +# also loose a lot of useful error-checking. +# NAT: autoconf doesn't deal with CASSERT: this is a user choice. +CASSERT= true + +# Comment out ENFORCE_ALIGNMENT if you do NOT want unaligned access to +# multi-byte types to generate a bus error. +# NAT: autoconf doesn't deal with ENFORCE_ALIGNMENT. Should it test for +# NAT: it and only set it if it has to?). +ENFORCE_ALIGNMENT= true + +# Comment out PROFILE to generate a profile version of the binaries +# NAT: autoconf doesn't deal with PROFILE: this is a user choice. +#PROFILE= -p -non_shared + +# About the use of readline in psql: +# psql does not require the GNU readline and history libraries. Hence, we +# do not compile with them by default. However, there are hooks in the +# program which supports the use of GNU readline and history. Should you +# decide to use them, change USE_READLINE to true and change READLINE_INCDIR +# and READLINE_LIBDIR to reflect the location of the readline and history +# headers and libraries. +# +# NAT: autoconf will check for libreadline and will define USE_READLINE +# NAT: appropriately, and hopefully take care of the inc and lib too. +@USE_READLINE@ + +# directories for the readline and history libraries. +# [automagically taken care of by autoconf?] +#READLINE_INC= -I/home/tools/include +#READLINE_LIB= -L/home/tools/lib -lreadline + +# use the following if your readline has a separate history lib +#HISTORY_INC= -I/home/tools/include -I/home/tools/include/readline +#HISTORY_LIB= -L/home/tools/lib -lhistory + +# If you plan to use Kerberos for authentication... +# +# Comment out KRBVERS if you do not use Kerberos. +# Set KRBVERS to "4" for Kerberos v4, "5" for Kerberos v5. +# XXX Edit the default Kerberos variables below! +# +# NAT: I don't know how to deal with kerberos in autoconf. + +#KRBVERS= 5 + +# Globally pass Kerberos file locations. +# these are used in the postmaster and all libpq applications. +# +# Adjust KRBINCS and KRBLIBS to reflect where you have Kerberos +# include files and libraries installed. +# PG_KRB_SRVNAM is the name under which POSTGRES is registered in +# the Kerberos database (KDC). +# PG_KRB_SRVTAB is the location of the server's keytab file. +# +ifdef KRBVERS +KRBINCS= -I/usr/athena/include +KRBLIBS= -L/usr/athena/lib +KRBFLAGS+= $(KRBINCS) -DPG_KRB_SRVNAM='"postgres_dbms"' + ifeq ($(KRBVERS), 4) +KRBFLAGS+= -DKRB4 +KRBFLAGS+= -DPG_KRB_SRVTAB='"/etc/srvtab"' +KRBLIBS+= -lkrb -ldes + else + ifeq ($(KRBVERS), 5) +KRBFLAGS+= -DKRB5 +KRBFLAGS+= -DPG_KRB_SRVTAB='"FILE:/krb5/srvtab.postgres"' +KRBLIBS+= -lkrb5 -lcrypto -lcom_err -lisode + endif + endif +endif + +# +# location of Tcl/Tk headers and libraries +# +# Uncomment this to build the tcl utilities. +# USE_TCL= true +# customize these to your site's needs +# +# NAT: I don't know how to deal with TCL in autoconf. +TCL_INCDIR= /home/tools/include +TCL_LIBDIR= /home/tools/lib +TCL_LIB= -ltcl7.5 +TK_INCDIR= /home/tools/include +TK_LIBDIR= /home/tools/lib +TK_LIB= -ltk4.1 + +X11_INCDIR= /usr/include +X11_LIBDIR= /usr/lib +X11_LIB= -lX11 -lsocket -lnsl + +############################################################################## +# +# YACC + +YFLAGS= -d + +############################################################################## +# +# Installation. +# +# For many ports, INSTALL is overridden below. +INSTALL= @INSTALL@ +RANLIB= @RANLIB@ + +INSTLOPTS= @INSTLOPTS@ +INSTL_EXE_OPTS= @INSTL_EXE_OPTS@ +INSTL_LIB_OPTS= @INSTL_LIB_OPTS@ + +############################################################################## +# +# For building shell scripts: +# +# For many ports, these are overridden below. + +# DASH_N is what we put before the text on an echo command when we don't +# want a trailing newline. BACKSLASH_C is what we put at the end of the +# string on a echo command when we don't want a trailing newline. On +# some systems, you do echo -n "no newline after this", while on others +# you do echo "no newline after this\c". + +DASH_N= @DASH_N@ +BACKSLASH_C= @BACKSLASH_C@ + + +############################################################################## +# +# Customization. +# +# This includes your local customizations if Makefile.custom exists +# in the source directory. This file doesn't exist in the original +# distribution so that it doesn't get overwritten when you upgrade. +ifneq ($(wildcard $(SRCDIR)/Makefile.custom), ) +include $(SRCDIR)/Makefile.custom +endif + +############################################################################# +# include port specific rules and variables. +# +# +# HISTORY: Before October 1996, this file included the following line: +# -include $(MKDIR)/port/postgres.mk.$(PORTNAME) +# Now, we instead have all the former contents of those .mk files inline +# with ifeq ($(PORTNAME) ...). This makes it easier to read the make +# files and to make certain updates. It should also help with the migration +# to autoconf. -Bryan + +# Since there are no longer separate files for each platform, much of the +# commonality among the platforms ought to be factored out of the following. + +############################################################################## +# +# AR + +# NAT: I am unsure how to write a test for AROPT=cq vs AROPT=crs, because +# NAT: I don't know what it does ;-) +ifneq (,$(findstring /$(PORTNAME)/, /BSD44_derived/bsdi/sparc/)) + AROPT = cq +else + AROPT = crs +endif + +############################################################################## +# +# Shared libraries. +# This is overridden for many PORTNAMEs below. + +# NAT: autoconf needs to know about DLSUFFIX +DLSUFFIX= .so + +# +# CC +# +# NAT: autoconf tests for CC +CC= @CC@ + +# +# LEX +# +# NAT: autoconf tests for LEX and LEXLIB. I've removed the -L and +# NAT: am unsure how to get it back with autoconf. +LEX= @LEX@ +LD_ADD_BE = @LEXLIB@ + +# SHARED LIBRARIES +# +# NAT: I am unsure how to write an autoconf test for shared library +# NAT: flags and rules. +CFLAGS_SL= -fpic -DPIC + +%.so: %.o + $(LD) -x -r -o $<.obj $< + @echo building shared object $@ + @rm -f $@.pic + @${AR} cq $@.pic `lorder $<.obj | tsort` + ${RANLIB} $@.pic + @rm -f $@ + $(LD) -x -Bshareable -Bforcearchive \ + -o $@ $@.pic +endif + +#-------------------------------------------------------------------------- + +ifeq ($(PORTNAME), aix) +# the -lm is because "pow" is defined in libbsd.a and we want pow(3m) +# NAT: autoconf should look to see whether libbsd has the functions +# NAT: we need from it, and if so include it. Similarly -lm. -ll is +# NAT: for lex. -lld is the shared library stuff that needs attention. +LDADD_BE= -lm -lbsd -ll -lld + +# MAKE_EXPORTS is required for svr4 loaders that want a file of +# symbol names to tell them what to export/import. +# NAT: is there any harm in always defining this? Does it have meaning +# NAT: in BSD systems? How do I write an autoconf test for this? +MAKE_EXPORTS= true + +# +# Random things that must be passed everywhere to enable +# everything to compile. :-/ +# +# The -qmaxmem is because of optimizer limits. +# The HAVE_ANSI_CPP flag indicates that cc isn't ANSI but also doesn't +# have a Reiser (pcc-style) cpp. +# +# NAT: autoconf should test for this by building a program that tests +# NAT: the optimizer limits and the signed chars thing. +CFLAGS_BE= -qchars=signed -qmaxmem=4000 + +# NAT: ldexport stuff. I don't understand this. +EXPSUFF= .exp + +MKLDEXPORT=$(SRCDIR)/backend/port/aix/mkldexport.sh + +%$(EXPSUFF): %.o + $(MKLDEXPORT) $< `pwd` > $@ + +%.so: %.o %$(EXPSUFF) + @echo The link stage here: + $(LD) -H512 -T512 -o $@ -e _nostart \ + -bI:$(LIBDIR)/postgres$(EXPSUFF) -bE:$*$(EXPSUFF) \ + $*.o -lm -lc 2>/dev/null +endif + +#--------------------------------------------------------------------------- + +ifeq ($(PORTNAME), alpha) +# NOFIXADE disallows unaligned access. +# on Ultrix and OSF/1 it invokes an explicit syscall. +# on HP-UX it turns off certain compiler options. +# This is defined here because a bunch of clients include tmp/c.h, +# which is where the work is done on HP-UX. It only affects the +# backend on Ultrix and OSF/1. +ifdef ENFORCE_ALIGNMENT +CFLAGS_BE= -DNOFIXADE +else +CFLAGS_BE= -DNOPRINTADE +endif +# NAT: autoconf should test for this. What symbol does libln.a give us? +LDADD_BE= -lln + +# use the regex library +# NAT: autoconf should test for this, but how? +USE_REGEX= 1 + +# NAT: autoconf should tell us which of these nasty definitions to use. +%.so: %.o + $(LD) -shared -expect_unresolved '*' -o $@ $< + +endif + +#--------------------------------------------------------------------------- + +ifeq ($(PORTNAME), bsdi) + +# NAT: how should autoconf test for pre-2.1. bsdi? grep for those +# NAT: strings in the return value from uname? +PRE_BSDI_2_1= false +ifeq ($(shell uname -r), 2.0) +PRE_BSDI_2_1= true +endif +ifeq ($(shell uname -r), 2.01) +PRE_BSDI_2_1= true +endif + +# NAT: autoconf needs tests for -lipc, -lcompat, -ldld, -ltermap + +ifeq ($(PRE_BSDI_2_1), false) +# cc is gcc v1.42 +# gcc is gcc v2.7.2 + LDADD_BE= -ltermcap -ldl -lipc +else +# cc is gcc v1.42 +# gcc is gcc v2.6.3 +# use the regex library + USE_REGEX= 1 + CFLAGS_BE= -DPRE_BSDI_2_1 + LDADD_BE= -ldld -lcompat -lipc +endif + +DLSUFFIX= .o + +endif + +#-------------------------------------------------------------------------- + +# NAT: autoconf needs tests for -fpic + +ifeq ($(PORTNAME), dgux) +CFLAGS_SL= -fpic +%.so: %.o + $(CC) -shared -o $@ $< + +LDADD_BE= -ldl -lfl + +endif + +#---------------------------------------------------------------------------- + +ifeq ($(PORTNAME), hpux) +# NAT: autoconf needs to test for -W l,-E export symbols +# -W l,-E export symbols for linking with the shared libraries +# dynamic loader + +LDADD_BE= -lBSD -ll +ifeq $(CC), cc) + CFLAGS_BE= -W l,-E + LDFLAGS_BE= -W l,-E + LDADD_BE+= -ldld +endif +ifeq ($(CC), gcc) + LDADD_BE+= /usr/lib/libdld.sl +endif + +# NAT: autoconf needs to check the HPUX version. How? + +ifdef ENFORCE_ALIGNMENT + CFLAGS_BE= -DNOFIXADE +else + HPUX_VERS:= $(shell uname -r) + HPUX_MAJOR= ${HPUX_VERS:R:E} + HPUX_MINOR= ${HPUX_VERS:E} + ifeq ($(HPUX_MAJOR), 08) + CFLAGS_BE+= +u -DHP_S500_ALIGN + LDFLAGS_BE+= +u + else + ifeq ($(HPUX_MAJOR), 09) + ifeq ($(CC), cc) + CFLAGS_BE+= +u4 + LDFLAGS_BE+= +u4 + endif + endif + endif +endif + +# NAT: autoconf needs to check the (extended) ANSI flag +# (extended) ANSI flag for cc (-Ae is same as -Aa -D_HPUX_SOURCE) +ifeq ($(CC), cc) +CFLAGS_BE+= -Ae +endif + +# NAT: shared library stuff needs to be detected by autoconf +CFLAGS_SL= +z +DLSUFFIX= .sl + +%.sl: %.o + $(LD) -b -o $@ $< + +endif + +#-------------------------------------------------------------------------- + +ifeq ($(PORTNAME), i386_solaris) +# +# Random things that must be passed everywhere to enable +# everything to compile. :-/ +# +# The extra -I flag is to scoop up extra BSD-emulating headers. +# This needs to be fixed. Things other than the backend should not be +# accessing headers in the backend directory. +CFLAGS_BE= -I$(SRCDIR)/backend/port/sparc_solaris +# NAT: autoconf needs to know about -lsocket, -lnsl +LDADD_BE= -lsocket -lnsl -ll -ldl + +# NAT: autoconf needs to know about -fPIC etc +ifeq ($(CC), cc) +CFLAGS_SL= -K PIC +else +CFLAGS_SL= -fPIC +endif + +%.so: %.o + $(LD) -G -Bdynamic -o $@ $< + +endif + +#---------------------------------------------------------------------------- + +ifeq ($(PORTNAME), irix5) +# NAT: autoconf needs to figure out -ll +LDADD_BE= -ll + +%.so: %.o + $(LD) -G -Bdynamic -o $@ $< + +endif + +#--------------------------------------------------------------------------- + +ifeq ($(PORTNAME), linux) +# NAT: how can autoconf work out the ELF stuff? +ifndef LINUX_ELF +DLSUFFIX= .o +LDADD_BE= -ldld +else +DLSUFFIX= .so +LDADD_BE= -ldl +LDFLAGS_BE= -rdynamic +endif +MK_NO_LORDER= true + +# use the regex library +# NAT: what is the regex library and how can autoconf find it? +USE_REGEX= 1 + +# NAT: autoconf needs to know about -fpic and other shared library +# NAT: isms +CFLAGS_SL= -fpic +%.so: %.o + $(CC) -shared -o $@ $< + +# The Linux gnulib #defines the problem away for you and calls +# the BSD routines if you give it the right flags. +# NAT: what problem, and how can autoconf test for -lbsd needed? +LDADD_BE+= -lbsd + +endif + +#--------------------------------------------------------------------------- + +ifeq ($(PORTNAME), sparc) + +# NAT: autoconf needs to know about gcc vs cc and -PIC vs -fPIC +ifeq ($(CC), cc) +CFLAGS_SL= -PIC +else +CFLAGS_SL= -fPIC +endif +LDADD_BE= -lln -ldl + +# NAT: autoconf also needs to know about -Bdynamic +%.so: %.o + $(LD) -dc -dp -Bdynamic -o $@ $< +endif + +#---------------------------------------------------------------------------- + +ifeq ($(PORTNAME), sparc_solaris) + +# NAT: autoconf needs to know about dynamic loading libraries +LDADD_BE= -ll -ldl + +# +# Random things that must be passed everywhere to enable +# everything to compile. :-/ +# +# The extra -I flag is to scoop up extra BSD-emulating headers. +# NAT: autoconf needs to know about BSD-emulating headers (see +# NAT: the i386 port), -lsocket and -lnsl +CFLAGS_BE= -I$(SRCDIR)/backend/port/sparc_solaris +LDADD_BE+= -lsocket -lnsl + +# NAT: autoconf needs to know about -K PIC vs -fPIC +ifeq ($(CC), cc) +CFLAGS_SL= -K PIC +else +CFLAGS_SL= -fPIC +endif + +# NAT: autoconf needs to know about dynamic loading +%.so: %.o + $(LD) -G -Bdynamic -o $@ $< + +endif + +#----------------------------------------------------------------------------- + +ifeq ($(PORTNAME), svr4) +# NAT: autoconf needs to know about -W0 and why you need it +CFLAGS+= -W0 + +# MAKE_EXPORTS is required for svr4 loaders that want a file of +# symbol names to tell them what to export/import. +# NAT: autoconf needs to know about MAKE_EXPORTS +MAKE_EXPORTS= true + +# +# Random things that must be passed everywhere to enable +# everything to compile. :-/ +# +# The extra -I flag is to scoop up extra BSD-emulating headers. +# NAT: autoconf needs to know about BSD-emulating headers, +# NAT: -lsocket, -lnsl -lc libucb -ll and -ldl +CFLAGS_BE+= -I$(SRCDIR)/backend/port/svr4 +LDADD_BE= -lsocket -lnsl -lc /usr/ucblib/libucb.a -ll -ldl +# NAT: autoconf needs to know about -LD-Blargedynsym +LDFLAGS_BE= -LD-Blargedynsym + +# NAT: autoconf needs to know about dynamic loading +%.so: %.o + $(LD) -G -Bdynamic -o $@ $< + +endif + +#--------------------------------------------------------------------------- + +ifeq ($(PORTNAME), ultrix4) +# NAT: autoconf needs to know about the different types of alignment +# NAT: enforcement. +ifdef ENFORCE_ALIGNMENT +CFLAGS_BE= -DNOFIXADE +endif +# NAT: autoconf needs to know about dynamic loading +LDADD_BE= -ldl -lln + +# NAT: autoconf needs to know about NO_BEFOREINSTL - what is it used +# NAT: for and how do I test for it? +# install creates intermediate directories +NO_BEFOREINSTL= true + +# NAT: autoconf needs to know about dynamic loading +CFLAGS_SL= -G 0 +DLSUFFIX= .o + +endif + + +ifneq ($(PORTNAME), next) +# NAT: autoconf needs to know about -lm +LDADD_BE+= -lm +endif + +# This goes here so that customization in Makefile.custom is effective +############################################################################## +# +# Flags for CC and LD. + +############################################################################## +# COPT +# +# COPT is for options that the sophisticated builder might want to vary +# from one build to the next, like options to build Postgres with debugging +# information included. COPT is meant to be set on the make command line, +# for example with the command "make COPT=-g". The value you see set here +# is the default that gets used if the builder does not give a value for +# COPT on his make command. +# +# There is a nonobvious relationship between -O (optimization) and +# -Werror (consider all warnings fatal). On some systems, if you don't +# optimize, you will always get some warnings because the system header +# files will include some unreferenced functions in the code. These are +# functions that are supposed to be inline, so there wouldn't ordinarily +# be an "unreferenced" problem, but if you don't enable optimization, no +# inlining can happen, and hence the problem. Therefore, we include +# if you override -O, you override -Werror as well. +# +# CUSTOM_COPT is something the user may set in Makefile.custom + +# Common values for COPT are: -g for debuggable binaries, -m486 if you are +# using a i486 or better. + +ifneq ($(CUSTOM_COPT),) +COPT= $(CUSTOM_COPT) +else +ifeq ($(CC), gcc) +COPT= -O2 -Werror +else +COPT= -O +endif +endif + + +ifeq ($(CC), gcc) +# Some flags only gcc recognizes... +# PostgreSQL should *always* compile with these enabled +CFLAGS+= -Wall -Wmissing-prototypes +endif + +# Globally pass debugging/optimization/profiling flags based +# on the options selected above. + + +ifdef COPT + CFLAGS+= $(COPT) +else + ifndef CFLAGS_OPT + CFLAGS_OPT= -O + endif + CFLAGS+= $(CFLAGS_OPT) +endif + +ifndef CASSERT + CFLAGS+= -DNO_ASSERT_CHECKING +endif + +ifdef PROFILE + CFLAGS+= $(PROFILE) + LDFLAGS+= $(PROFILE) +endif + +# Globally pass PORTNAME +CFLAGS+= -D$(PORTNAME) + +# include port-specific flags +CFLAGS+= $(CFLAGS_BE) +LDADD+= $(LDADD_BE) +LDFLAGS+= $(LDFLAGS_BE) + diff --git a/src/Makefile.in b/src/Makefile.in new file mode 100644 index 0000000000..5f24ace6d6 --- /dev/null +++ b/src/Makefile.in @@ -0,0 +1,64 @@ +#------------------------------------------------------------------------- +# +# Makefile.inc-- +# Build and install postgres. +# +# Copyright (c) 1994, Regents of the University of California +# +# +# IDENTIFICATION +# $Header: /cvsroot/pgsql/src/Attic/Makefile.in,v 1.1 1997/01/23 22:50:11 scrappy Exp $ +# +#------------------------------------------------------------------------- + +SRCDIR= . +include Makefile.global + +FIND = @find@ + +# assuming gnu tar and split here +TAR = @tar@ +SPLIT = @split@ + +ETAGS = @etags@ +XARGS = @xargs@ + +.DEFAULT all: + @if test $(PORTNAME) = UNDEFINED; then \ + echo You must set the PORTNAME value in Makefile.global before \ + you can build Postgres. ;\ + false ;\ + fi + $(MAKE) -C utils $@ + $(MAKE) -C backend $@ + $(MAKE) -C libpq $@ +ifeq ($(HAVE_Cplusplus), true) + $(MAKE) -C libpq++ $@ +endif +ifeq ($(USE_TCL), true) + $(MAKE) -C libpgtcl $@ +endif + $(MAKE) -C bin $@ +ifneq ($(wildcard man), ) + $(MAKE) -C man $@ +endif + @if test $@. = all. -o $@. = .; then \ + echo All of Postgres95 is successfully made. Ready to install. ;\ + fi + +TAGS: + rm -f TAGS; \ + for i in backend libpq bin; do \ + $(FIND) $$i -name '*.[chyl]' -print | $(XARGS) $(ETAGS) -a ; \ + done + +# target to generate a backup tar file and split files that can be +# saved to 1.44M floppy +BACKUP: + rm -f BACKUP.filelist BACKUP.tgz; \ + $(FIND) . -not -path '*obj/*' -not -path '*data/*' -type f -print > BACKUP.filelist; \ + $(TAR) --files-from BACKUP.filelist -c -z -v -f BACKUP.tgz + $(SPLIT) --bytes=1400k BACKUP.tgz pgBACKUP. + +.PHONY: TAGS +.PHONY: BACKUP diff --git a/src/configure b/src/configure new file mode 100755 index 0000000000..7e8d0126ac --- /dev/null +++ b/src/configure @@ -0,0 +1,2315 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.10 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.10" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=backend/access/common/heaptuple.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + ac_prog_rejected=no + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 +if test $ac_cv_prog_gcc = yes; then + GCC=yes + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_gcc_g=yes +else + ac_cv_prog_gcc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:676: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +for ac_prog in $CCC c++ g++ gcc CC cxx +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CXX="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CXX="$ac_cv_prog_CXX" +if test -n "$CXX"; then + echo "$ac_t""$CXX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CXX" && break +done +test -n "$CXX" || CXX="gcc" + + +echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gxx=yes +else + ac_cv_prog_gxx=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gxx" 1>&6 +if test $ac_cv_prog_gxx = yes; then + GXX=yes + if test "${CXXFLAGS+set}" != set; then + echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gxx_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.cc +if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then + ac_cv_prog_gxx_g=yes +else + ac_cv_prog_gxx_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_gxx_g" 1>&6 + if test $ac_cv_prog_gxx_g = yes; then + CXXFLAGS="-g -O" + else + CXXFLAGS="-O" + fi + fi +else + GXX= + test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" +fi + + +if test -n "$CXX"; then + export HAVECXX + HAVECXX='HAVE_Cplusplus=true' +fi + + +# Extract the first word of "install", so it can be a program name with args. +set dummy install; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_INSTALL'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$INSTALL" in + /*) + ac_cv_path_INSTALL="$INSTALL" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_INSTALL="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_INSTALL" && ac_cv_path_INSTALL="/usr/bin:/usr/ucb:/home/tools/bin" + ;; +esac +fi +INSTALL="$ac_cv_path_INSTALL" +if test -n "$INSTALL"; then + echo "$ac_t""$INSTALL" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "bsdinst", so it can be a program name with args. +set dummy bsdinst; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_BSDINST'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$BSDINST" in + /*) + ac_cv_path_BSDINST="$BSDINST" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_BSDINST="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_BSDINST" && ac_cv_path_BSDINST="/usr/bin/X11:/usr/X11R6/bin:/sbin" + ;; +esac +fi +BSDINST="$ac_cv_path_BSDINST" +if test -n "$BSDINST"; then + echo "$ac_t""$BSDINST" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + INSTLOPTS="-m 444" + INSTL_EXE_OPTS="-m 555" + INSTL_LIB_OPTS="-m 664" +if test -n "$INSTALL"; then + INSTLOPTS="-c $INSTLOPTS" + INSTL_EXE_OPTS="-c $INSTL_EXE_OPTS" + INSTL_LIB_OPTS="-c $INSTL_LIB_OPTS" +else + INSTALL=$BSDINST +fi + + + + + +ECHO_N_OUT=`echo -n "" | wc -c` +ECHO_C_OUT=`echo "\c" | wc -c` +if test "$ECHO_N_OUT" -eq 0; then + DASH_N='-n' + BACKSLASH_C= +else + if test "ECHO_C_OUT" -eq 0; then + DASH_N= + BACKSLASH_C= '\\\\c' + else + { echo "configure: error: "echo behaviour undetermined"" 1>&2; exit 1; } + fi +fi + + + +# Extract the first word of "flex", so it can be a program name with args. +set dummy flex; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LEX="flex" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" +fi +fi +LEX="$ac_cv_prog_LEX" +if test -n "$LEX"; then + echo "$ac_t""$LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$LEXLIB" +then + case "$LEX" in + flex*) ac_lib=fl ;; + *) ac_lib=l ;; + esac + echo $ac_n "checking for -l$ac_lib""... $ac_c" 1>&6 +ac_lib_var=`echo $ac_lib'_'yywrap | tr './+\055' '__p_'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-l$ac_lib $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LEXLIB="-l$ac_lib" +else + echo "$ac_t""no" 1>&6 +fi + +fi + +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +set dummy ${MAKE-make}; ac_make=$2 +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "find", so it can be a program name with args. +set dummy find; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_find'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$find" in + /*) + ac_cv_path_find="$find" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_find="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +find="$ac_cv_path_find" +if test -n "$find"; then + echo "$ac_t""$find" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "tar", so it can be a program name with args. +set dummy tar; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_tar'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$tar" in + /*) + ac_cv_path_tar="$tar" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_tar="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +tar="$ac_cv_path_tar" +if test -n "$tar"; then + echo "$ac_t""$tar" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "split", so it can be a program name with args. +set dummy split; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_split'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$split" in + /*) + ac_cv_path_split="$split" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_split="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +split="$ac_cv_path_split" +if test -n "$split"; then + echo "$ac_t""$split" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "etags", so it can be a program name with args. +set dummy etags; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_etags'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$etags" in + /*) + ac_cv_path_etags="$etags" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_etags="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +etags="$ac_cv_path_etags" +if test -n "$etags"; then + echo "$ac_t""$etags" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "xargs", so it can be a program name with args. +set dummy xargs; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_xargs'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$xargs" in + /*) + ac_cv_path_xargs="$xargs" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_xargs="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +xargs="$ac_cv_path_xargs" +if test -n "$xargs"; then + echo "$ac_t""$xargs" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "ipcs", so it can be a program name with args. +set dummy ipcs; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_ipcs'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$ipcs" in + /*) + ac_cv_path_ipcs="$ipcs" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_ipcs="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +ipcs="$ac_cv_path_ipcs" +if test -n "$ipcs"; then + echo "$ac_t""$ipcs" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "ipcrm", so it can be a program name with args. +set dummy ipcrm; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_path_ipcrm'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$ipcrm" in + /*) + ac_cv_path_ipcrm="$ipcrm" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_ipcrm="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +ipcrm="$ac_cv_path_ipcrm" +if test -n "$ipcrm"; then + echo "$ac_t""$ipcrm" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +echo $ac_n "checking for -lreadline""... $ac_c" 1>&6 +ac_lib_var=`echo readline'_'readline | tr './+\055' '__p_'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lreadline $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + USE_READLINE='USE_READLINE=true' +else + echo "$ac_t""no" 1>&6 +fi + + +echo $ac_n "checking for -lhistory""... $ac_c" 1>&6 +ac_lib_var=`echo history'_'history | tr './+\055' '__p_'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lhistory $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo history | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi + + +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +#include +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else +cat > conftest.$ac_ext < +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +{ (eval echo configure:1423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + : +else + ac_cv_header_stdc=no +fi +fi +rm -fr conftest* +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + +echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#ifndef WEXITSTATUS +#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) +#endif +#ifndef WIFEXITED +#define WIFEXITED(stat_val) (((stat_val) & 255) == 0) +#endif +int main() { return 0; } +int t() { +int s; +wait (&s); +s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; +; return 0; } +EOF +if { (eval echo configure:1464: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_header_sys_wait_h=yes +else + rm -rf conftest* + ac_cv_header_sys_wait_h=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6 +if test $ac_cv_header_sys_wait_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_SYS_WAIT_H 1 +EOF + +fi + +for ac_hdr in fcntl.h limits.h sys/file.h sys/ioctl.h sys/time.h unistd.h +do +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1496: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` + cat >> confdefs.h <&6 +fi +done + + +echo $ac_n "checking for working const""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <j = 5; +} +{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; +} + +; return 0; } +EOF +if { (eval echo configure:1576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_const=yes +else + rm -rf conftest* + ac_cv_c_const=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_c_const" 1>&6 +if test $ac_cv_c_const = no; then + cat >> confdefs.h <<\EOF +#define const +EOF + +fi + +echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "uid_t" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_uid_t=yes +else + rm -rf conftest* + ac_cv_type_uid_t=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_type_uid_t" 1>&6 +if test $ac_cv_type_uid_t = no; then + cat >> confdefs.h <<\EOF +#define uid_t int +EOF + + cat >> confdefs.h <<\EOF +#define gid_t int +EOF + +fi + +echo $ac_n "checking for inline""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_inline=$ac_kw; break +fi +rm -f conftest* + +done + +fi + +echo "$ac_t""$ac_cv_c_inline" 1>&6 +case "$ac_cv_c_inline" in + inline | yes) ;; + no) cat >> confdefs.h <<\EOF +#define inline +EOF + ;; + *) cat >> confdefs.h <&6 +if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "mode_t" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_mode_t=yes +else + rm -rf conftest* + ac_cv_type_mode_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_mode_t" 1>&6 +if test $ac_cv_type_mode_t = no; then + cat >> confdefs.h <<\EOF +#define mode_t int +EOF + +fi + +echo $ac_n "checking for off_t""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "off_t" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_off_t=yes +else + rm -rf conftest* + ac_cv_type_off_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_off_t" 1>&6 +if test $ac_cv_type_off_t = no; then + cat >> confdefs.h <<\EOF +#define off_t long +EOF + +fi + +echo $ac_n "checking for size_t""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "size_t" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_size_t=yes +else + rm -rf conftest* + ac_cv_type_size_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_size_t" 1>&6 +if test $ac_cv_type_size_t = no; then + cat >> confdefs.h <<\EOF +#define size_t unsigned +EOF + +fi + +echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +int main() { return 0; } +int t() { +struct tm *tp; +; return 0; } +EOF +if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_header_time=yes +else + rm -rf conftest* + ac_cv_header_time=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_header_time" 1>&6 +if test $ac_cv_header_time = yes; then + cat >> confdefs.h <<\EOF +#define TIME_WITH_SYS_TIME 1 +EOF + +fi + +echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +int main() { return 0; } +int t() { +struct tm *tp; tp->tm_sec; +; return 0; } +EOF +if { (eval echo configure:1807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_struct_tm=time.h +else + rm -rf conftest* + ac_cv_struct_tm=sys/time.h +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_struct_tm" 1>&6 +if test $ac_cv_struct_tm = sys/time.h; then + cat >> confdefs.h <<\EOF +#define TM_IN_SYS_TIME 1 +EOF + +fi + + +if test $ac_cv_prog_gcc = yes; then + echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_pattern="Autoconf.*'x'" + cat > conftest.$ac_ext < +Autoconf TIOCGETP +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +else + rm -rf conftest* + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat > conftest.$ac_ext < +Autoconf TCGETA +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi + +echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_func_memcmp'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_memcmp=no +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_func_memcmp=yes +else + ac_cv_func_memcmp=no +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_func_memcmp" 1>&6 +test $ac_cv_func_memcmp = no && LIBOBJS="$LIBOBJS memcmp.o" + +echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" void (*signal (int, void (*)(int)))(int); +#else +void (*signal ()) (); +#endif + +int main() { return 0; } +int t() { +int i; +; return 0; } +EOF +if { (eval echo configure:1927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_type_signal=void +else + rm -rf conftest* + ac_cv_type_signal=int +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_type_signal" 1>&6 +cat >> confdefs.h <&6 +if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char vprintf(); + +int main() { return 0; } +int t() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_vprintf) || defined (__stub___vprintf) +choke me +#else +vprintf(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_func_vprintf=yes" +else + rm -rf conftest* + eval "ac_cv_func_vprintf=no" +fi +rm -f conftest* + +fi +if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then + echo "$ac_t""yes" 1>&6 + cat >> confdefs.h <<\EOF +#define HAVE_VPRINTF 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi + +if test "$ac_cv_func_vprintf" != yes; then +echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char _doprnt(); + +int main() { return 0; } +int t() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub__doprnt) || defined (__stub____doprnt) +choke me +#else +_doprnt(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_func__doprnt=yes" +else + rm -rf conftest* + eval "ac_cv_func__doprnt=no" +fi +rm -f conftest* + +fi +if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then + echo "$ac_t""yes" 1>&6 + cat >> confdefs.h <<\EOF +#define HAVE_DOPRNT 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi + +fi + +for ac_func in ftime getcwd gethostname gettimeofday putenv regcomp select socket strcspn strdup strerror strftime strspn strtod strtol +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { return 0; } +int t() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* + +fi +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + +#AC_OUTPUT(backend/optimizer/path/Makefile libpq++/man/Makefile backend/port/sparc_solaris/Makefile backend/utils/misc/Makefile backend/port/ultrix4/Makefile bin/psql/Makefile backend/utils/init/Makefile tutorial/C-code/Makefile test/examples/Makefile backend/utils/adt/Makefile bin/destroyuser/Makefile Makefile tutorial/Makefile bin/pg_dump/Makefile bin/cleardbdir/Makefile backend/optimizer/plan/Makefile backend/access/heap/Makefile backend/storage/page/Makefile backend/port/svr4/Makefile backend/optimizer/Makefile backend/utils/hash/Makefile backend/storage/large_object/Makefile backend/access/hash/Makefile test/Makefile backend/optimizer/prep/Makefile bin/initdb/Makefile bin/pg_version/Makefile bin/ipcclean/Makefile bin/pg4_dump/Makefile backend/postmaster/Makefile backend/access/Makefile test/regress/Makefile backend/storage/Makefile backend/port/bsdi/Makefile libpq++/Makefile backend/lib/Makefile backend/libpq/Makefile backend/access/gist/Makefile backend/nodes/Makefile libpgtcl/Makefile libpq/Makefile bin/destroydb/Makefile backend/access/nbtree/Makefile bin/Makefile bin/createuser/Makefile backend/port/Makefile backend/port/irix5/Makefile backend/utils/sort/Makefile backend/utils/error/Makefile backend/utils/time/Makefile backend/Makefile backend/utils/Makefile backend/commands/Makefile bin/pg_id/Makefile backend/tioga/Makefile backend/utils/cache/Makefile backend/port/aix/Makefile backend/storage/lmgr/Makefile test/bench/Makefile bin/monitor/Makefile backend/access/index/Makefile backend/port/hpux/Makefile utils/Makefile backend/port/i386_solaris/Makefile backend/catalog/Makefile backend/storage/smgr/Makefile backend/bootstrap/Makefile backend/storage/buffer/Makefile backend/storage/ipc/Makefile backend/rewrite/Makefile backend/access/rtree/Makefile backend/port/linux/Makefile backend/storage/file/Makefile man/Makefile libpq++/examples/Makefile backend/main/Makefile bin/pgtclsh/Makefile backend/access/common/Makefile bin/createdb/Makefile backend/port/dgux/Makefile backend/utils/fmgr/Makefile backend/parser/Makefile backend/port/sparc/Makefile backend/executor/Makefile backend/optimizer/util/Makefile tools/mkldexport/Makefile backend/utils/mmgr/Makefile backend/tcop/Makefile backend/port/BSD44_derived/Makefile backend/access/transam/Makefile backend/port/alpha/Makefile backend/regex/Makefile) + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.10" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile Makefile.global" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@CXX@%$CXX%g +s%@HAVECXX@%$HAVECXX%g +s%@INSTALL@%$INSTALL%g +s%@BSDINST@%$BSDINST%g +s%@INSTLOPTS@%$INSTLOPTS%g +s%@INSTL_LIB_OPTS@%$INSTL_LIB_OPTS%g +s%@INSTL_EXE_OPTS@%$INSTL_EXE_OPTS%g +s%@DASH_N@%$DASH_N%g +s%@BACKSLASH_C@%$BACKSLASH_C%g +s%@LEX@%$LEX%g +s%@LEXLIB@%$LEXLIB%g +s%@LN_S@%$LN_S%g +s%@SET_MAKE@%$SET_MAKE%g +s%@RANLIB@%$RANLIB%g +s%@find@%$find%g +s%@tar@%$tar%g +s%@split@%$split%g +s%@etags@%$etags%g +s%@xargs@%$xargs%g +s%@ipcs@%$ipcs%g +s%@ipcrm@%$ipcrm%g +s%@USE_READLINE@%$USE_READLINE%g +s%@LIBOBJS@%$LIBOBJS%g + +CEOF +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust relative srcdir, etc. for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file +fi; done +rm -f conftest.subs + + + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 diff --git a/src/configure.in b/src/configure.in new file mode 100644 index 0000000000..237a712dfe --- /dev/null +++ b/src/configure.in @@ -0,0 +1,98 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(backend/access/common/heaptuple.c) + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_CPP +AC_PROG_CXX + +dnl Check if we should set Have_Cplusplus +if test -n "$CXX"; then + export HAVECXX + HAVECXX='HAVE_Cplusplus=true' +fi +AC_SUBST(HAVECXX) + +dnl AC_PROG_INSTALL was broken on my machine (NAT), so here's an +dnl alternative, built from the various portname options +AC_PATH_PROG(INSTALL, install, /usr/bin:/usr/ucb:/home/tools/bin) +AC_PATH_PROG(BSDINST, bsdinst, /usr/bin/X11:/usr/X11R6/bin:/sbin) + INSTLOPTS="-m 444" + INSTL_EXE_OPTS="-m 555" + INSTL_LIB_OPTS="-m 664" +if test -n "$INSTALL"; then + INSTLOPTS="-c $INSTLOPTS" + INSTL_EXE_OPTS="-c $INSTL_EXE_OPTS" + INSTL_LIB_OPTS="-c $INSTL_LIB_OPTS" +else + INSTALL=$BSDINST +fi +AC_SUBST(INSTALL) +AC_SUBST(INSTLOPTS) +AC_SUBST(INSTL_LIB_OPTS) +AC_SUBST(INSTL_EXE_OPTS) + +dnl Check the option to echo to inhibit newlines. +ECHO_N_OUT=`echo -n "" | wc -c` +ECHO_C_OUT=`echo "\c" | wc -c` +if test "$ECHO_N_OUT" -eq 0; then + DASH_N='-n' + BACKSLASH_C= +else + if test "ECHO_C_OUT" -eq 0; then + DASH_N= + BACKSLASH_C= '\\\\c' + else + AC_MSG_ERROR("echo behaviour undetermined") + fi +fi +AC_SUBST(DASH_N) +AC_SUBST(BACKSLASH_C) + +AC_PROG_LEX +AC_PROG_LN_S +AC_PROG_MAKE_SET +AC_PROG_RANLIB +AC_PATH_PROG(find, find) +AC_PATH_PROG(tar, tar) +AC_PATH_PROG(split, split) +AC_PATH_PROG(etags, etags) +AC_PATH_PROG(xargs, xargs) +AC_PATH_PROG(ipcs, ipcs) +AC_PATH_PROG(ipcrm, ipcrm) + +dnl Checks for libraries. +dnl readline (used in psql if present) +dnl if the library readline is present, +dnl set the shell variable USE_READLINE +dnl to have the value USE_READLINE=true +dnl and substitute it into the makefiles +AC_CHECK_LIB(readline, readline, USE_READLINE='USE_READLINE=true') +AC_SUBST(USE_READLINE) +AC_CHECK_LIB(history, history) + +dnl Checks for header files. +AC_HEADER_STDC +AC_HEADER_SYS_WAIT +AC_CHECK_HEADERS(fcntl.h limits.h sys/file.h sys/ioctl.h sys/time.h unistd.h) + +dnl Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_UID_T +AC_C_INLINE +AC_TYPE_MODE_T +AC_TYPE_OFF_T +AC_TYPE_SIZE_T +AC_HEADER_TIME +AC_STRUCT_TM + +dnl Checks for library functions. +AC_PROG_GCC_TRADITIONAL +AC_FUNC_MEMCMP +AC_TYPE_SIGNAL +AC_FUNC_VPRINTF +AC_CHECK_FUNCS(ftime getcwd gethostname gettimeofday putenv regcomp select socket strcspn strdup strerror strftime strspn strtod strtol) + +#AC_OUTPUT(backend/optimizer/path/Makefile libpq++/man/Makefile backend/port/sparc_solaris/Makefile backend/utils/misc/Makefile backend/port/ultrix4/Makefile bin/psql/Makefile backend/utils/init/Makefile tutorial/C-code/Makefile test/examples/Makefile backend/utils/adt/Makefile bin/destroyuser/Makefile Makefile tutorial/Makefile bin/pg_dump/Makefile bin/cleardbdir/Makefile backend/optimizer/plan/Makefile backend/access/heap/Makefile backend/storage/page/Makefile backend/port/svr4/Makefile backend/optimizer/Makefile backend/utils/hash/Makefile backend/storage/large_object/Makefile backend/access/hash/Makefile test/Makefile backend/optimizer/prep/Makefile bin/initdb/Makefile bin/pg_version/Makefile bin/ipcclean/Makefile bin/pg4_dump/Makefile backend/postmaster/Makefile backend/access/Makefile test/regress/Makefile backend/storage/Makefile backend/port/bsdi/Makefile libpq++/Makefile backend/lib/Makefile backend/libpq/Makefile backend/access/gist/Makefile backend/nodes/Makefile libpgtcl/Makefile libpq/Makefile bin/destroydb/Makefile backend/access/nbtree/Makefile bin/Makefile bin/createuser/Makefile backend/port/Makefile backend/port/irix5/Makefile backend/utils/sort/Makefile backend/utils/error/Makefile backend/utils/time/Makefile backend/Makefile backend/utils/Makefile backend/commands/Makefile bin/pg_id/Makefile backend/tioga/Makefile backend/utils/cache/Makefile backend/port/aix/Makefile backend/storage/lmgr/Makefile test/bench/Makefile bin/monitor/Makefile backend/access/index/Makefile backend/port/hpux/Makefile utils/Makefile backend/port/i386_solaris/Makefile backend/catalog/Makefile backend/storage/smgr/Makefile backend/bootstrap/Makefile backend/storage/buffer/Makefile backend/storage/ipc/Makefile backend/rewrite/Makefile backend/access/rtree/Makefile backend/port/linux/Makefile backend/storage/file/Makefile man/Makefile libpq++/examples/Makefile backend/main/Makefile bin/pgtclsh/Makefile backend/access/common/Makefile bin/createdb/Makefile backend/port/dgux/Makefile backend/utils/fmgr/Makefile backend/parser/Makefile backend/port/sparc/Makefile backend/executor/Makefile backend/optimizer/util/Makefile tools/mkldexport/Makefile backend/utils/mmgr/Makefile backend/tcop/Makefile backend/port/BSD44_derived/Makefile backend/access/transam/Makefile backend/port/alpha/Makefile backend/regex/Makefile) + +AC_OUTPUT(Makefile Makefile.global) \ No newline at end of file