From 4a0e9b6936ed90281ae76cf008fc5884720d3d29 Mon Sep 17 00:00:00 2001 From: Peter Eisentraut Date: Thu, 21 Nov 2002 23:33:22 +0000 Subject: [PATCH] Regenerate --- INSTALL | 1414 ++++++++++++++++++++++++++++--------------------------- 1 file changed, 731 insertions(+), 683 deletions(-) diff --git a/INSTALL b/INSTALL index fba9609e67..7b9fb0a67f 100644 --- a/INSTALL +++ b/INSTALL @@ -1,838 +1,886 @@ - PostgreSQL Installation Instructions - ------------------------------------------------------------------------ + PostgreSQL Installation Instructions -Short Version +This document describes the installation of PostgreSQL from the source code +distribution. -./configure -gmake -su -gmake install -adduser postgres -mkdir /usr/local/pgsql/data -chown postgres /usr/local/pgsql/data -su - postgres -/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data -/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 & -/usr/local/pgsql/bin/createdb test -/usr/local/pgsql/bin/psql test +------------------------------------------------------------------------------- + + Short Version + + ./configure + gmake + su + gmake install + adduser postgres + mkdir /usr/local/pgsql/data + chown postgres /usr/local/pgsql/data + su - postgres + /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data + /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 & + /usr/local/pgsql/bin/createdb test + /usr/local/pgsql/bin/psql test The long version is the rest of this document. - ------------------------------------------------------------------------ +------------------------------------------------------------------------------- -Requirements + Requirements -In general, a modern Unix-compatible platform should be able to run -PostgreSQL. The platforms that had received specific testing at the time of -release are listed in the Section called Supported Platforms below. In the -"doc" subdirectory of the distribution there are several platform-specific -FAQ documents you might wish to consult if you are having trouble. +In general, a modern Unix-compatible platform should be able to run PostgreSQL. +The platforms that had received specific testing at the time of release are +listed in the Section called Supported Platforms below. In the "doc" +subdirectory of the distribution there are several platform-specific FAQ +documents you might wish to consult if you are having trouble. +The following software packages are required for building PostgreSQL: -The following prerequisites exist for building PostgreSQL: + * GNU make is required; other make programs will *not* work. GNU make is + often installed under the name "gmake"; this document will always refer + to it by that name. (On some systems GNU make is the default tool with + the name "make".) To test for GNU make enter - * GNU make is required; other make programs will *not* work. GNU make is - often installed under the name "gmake"; this document will always refer - to it by that name. (On some systems GNU make is the default tool with - the name "make".) To test for GNU make enter + gmake --version - gmake --version + It is recommended to use version 3.76.1 or later. - It is recommended to use version 3.76.1 or later. + * You need an ISO/ANSI C compiler. Recent versions of GCC are + recommendable, but PostgreSQL is known to build with a wide variety of + compilers from different vendors. - * You need an ISO/ANSI C compiler. Recent versions of GCC are - recommendable, but PostgreSQL is known to build with a wide variety of - compilers from different vendors. + * gzip is needed to unpack the distribution in the first place. If you are + reading this, you probably already got past that hurdle. - * gzip is needed to unpack the distribution in the first place. If you - are reading this, you probably already got past that hurdle. + * The GNU Readline library (for comfortable line editing and command + history retrieval) will be used by default. If you don't want to use it + then you must specify the "--without-readline" option for "configure". + (On NetBSD, the "libedit" library is readline-compatible and is used if + "libreadline" is not found.) - * The GNU Readline library (for comfortable line editing and command - history retrieval) will automatically be used if found. You might wish - to install it before proceeding, but it is not essential. (On NetBSD, - the "libedit" library is readline-compatible and is used if - "libreadline" is not found.) + * To build on Windows NT or Windows 2000 you need the Cygwin and cygipc + packages. See the file "doc/FAQ_MSWIN" for details. - * GNU Flex and Bison are needed to build from scratch, but they are *not* - required when building from a released source package because - pre-generated output files are included in released packages. You will - need these programs only when building from a CVS tree or if you - changed the actual scanner and parser definition files. If you need - them, be sure to get Flex 2.5.4 or later and Bison 1.50 or later. Other - yacc programs can sometimes be used, but doing so requires extra effort - and is not recommended. Other lex programs will definitely not work. +The following packages are optional. They are not required in the default +configuration, but they are needed when certain build options are enabled, as +explained below. - * To build on Windows NT or Windows 2000 you need the Cygwin and cygipc - packages. See the file "doc/FAQ_MSWIN" for details. + * To build the server programming language PL/Perl you need a full Perl + installation, including the "libperl" library and the header files. Since + PL/Perl will be a shared library, the "libperl" library must be a shared + library also on most platforms. This appears to be the default in recent + Perl versions, but it was not in earlier versions, and in general it is + the choice of whomever installed Perl at your site. + If you don't have the shared library but you need one, a message like + this will appear during the build to point out this fact: -If you need to get a GNU package, you can find it at your local GNU mirror -site (see http://www.gnu.org/order/ftp.html for a list) or at -ftp://ftp.gnu.org/gnu/. + *** Cannot build PL/Perl because libperl is not a shared library. + *** You might have to rebuild your Perl installation. Refer to + *** the documentation for details. -Also check that you have sufficient disk space. You will need about 30 MB -for the source tree during compilation and about 10 MB for the installation -directory. An empty database cluster takes about 20 MB, databases take about -five times the amount of space that a flat text file with the same data -would take. If you are going to run the regression tests you will -temporarily need an extra 20 MB. Use the "df" command to check for disk -space. + (If you don't follow the on-screen output you will merely notice that the + PL/Perl library object, "plperl.so" or similar, will not be installed.) + If you see this, you will have to rebuild and install Perl manually to be + able to build PL/Perl. During the configuration process for Perl, request + a shared library. - ------------------------------------------------------------------------ + * To build the Python interface module or the PL/Python server programming + language, you need a Python installation, including the header files. + Since PL/Python will be a shared library, the "libpython" library must be + a shared library also on most platforms. This is not the case in a + default Python installation. + If after building and installing you have a file called "plpython.so" + (possibly a different extension), then everything went well. Otherwise + you should have seen a notice like this flying by: -If You Are Upgrading + *** Cannot build PL/Python because libpython is not a shared library. + *** You might have to rebuild your Python installation. Refer to + *** the documentation for details. + + That means you have to rebuild (part of) your Python installation to + supply this shared library. + The catch is that the Python distribution or the Python maintainers do + not provide any direct way to do this. The closest thing we can offer you + is the information in Python FAQ 3.30. On some operating systems you + don't really have to build a shared library, but then you will have to + convince the PostgreSQL build system of this. Consult the "Makefile" in + the "src/pl/plpython" directory for details. + + * If you want to build Tcl or Tk components (clients and the PL/Tcl + language) you of course need a Tcl installation. + + * To build the JDBC driver, you need Ant 1.5 or higher and a JDK. Ant is a + special tool for building Java-based packages. It can be downloaded from + the Ant web site. + If you have several Java compilers installed, it depends on the Ant + configuration which one gets used. Precompiled Ant distributions are + typically set up to read a file ".antrc" in the current user's home + directory for configuration. For example, to use a different JDK than the + default, this may work: + + JAVA_HOME=/usr/local/sun-jdk1.3 + JAVACMD=$JAVA_HOME/bin/java + + Note: Do not try to build the driver by calling "ant" or even + "javac" directly. This will not work. Run "gmake" normally as + described below. + + * To enable Native Language Support (NLS), that is, the ability to display + a program's messages in a language other than English, you need an + implementation of the Gettext API. Some operating systems have this + built-in (e.g., Linux, NetBSD, Solaris), for other systems you can + download an add-on package from here: http://www.postgresql.org/~petere/ + gettext.html. If you are using the gettext implementation in the GNU C + library then you will additionally need the GNU Gettext package for some + utility programs. For any of the other implementations you will not need + it. + + * Kerberos, OpenSSL, or PAM, if you want to support authentication using + these services. + +If you are build from a CVS tree instead of using a released source package, or +if you want to do development, you also need the following packages: + + * Flex and Bison are needed to build a CVS checkout or if you changed the + actual scanner and parser definition files. If you need them, be sure to + get Flex 2.5.4 or later and Bison 1.50 or later. Other yacc programs can + sometimes be used, but doing so requires extra effort and is not + recommended. Other lex programs will definitely not work. + +If you need to get a GNU package, you can find it at your local GNU mirror site +(see http://www.gnu.org/order/ftp.html for a list) or at ftp://ftp.gnu.org/ +gnu/. +Also check that you have sufficient disk space. You will need about 65 MB for +the source tree during compilation and about 15 MB for the installation +directory. An empty database cluster takes about 25 MB, databases take about +five times the amount of space that a flat text file with the same data would +take. If you are going to run the regression tests you will temporarily need up +to an extra 90 MB. Use the "df" command to check for disk space. + +------------------------------------------------------------------------------- + + If You Are Upgrading The internal data storage format changes with new releases of PostgreSQL. -Therefore, if you are upgrading an existing installation that does not have -a version number "7.2.x", you must back up and restore your data as shown -here. These instructions assume that your existing installation is under the -"/usr/local/pgsql" directory, and that the data area is in -"/usr/local/pgsql/data". Substitute your paths appropriately. +Therefore, if you are upgrading an existing installation that does not have a +version number "7.3.x", you must back up and restore your data as shown here. +These instructions assume that your existing installation is under the "/usr/ +local/pgsql" directory, and that the data area is in "/usr/local/pgsql/data". +Substitute your paths appropriately. - 1. Make sure that your database is not updated during or after the backup. - This does not affect the integrity of the backup, but the changed data - would of course not be included. If necessary, edit the permissions in - the file "/usr/local/pgsql/data/pg_hba.conf" (or equivalent) to - disallow access from everyone except you. + 1. Make sure that your database is not updated during or after the backup. + This does not affect the integrity of the backup, but the changed data + would of course not be included. If necessary, edit the permissions in + the file "/usr/local/pgsql/data/pg_hba.conf" (or equivalent) to disallow + access from everyone except you. - 2. To dump your database installation, type: + 2. To back up your database installation, type: - pg_dumpall > outputfile + pg_dumpall > outputfile - If you need to preserve OIDs (such as when using them as foreign keys), - then use the "-o" option when running "pg_dumpall". + If you need to preserve OIDs (such as when using them as foreign keys), + then use the "-o" option when running "pg_dumpall". + "pg_dumpall" does not save large objects. Check the Administrator's Guide + if you need to do this. + To make the backup, you can use the "pg_dumpall" command from the version + you are currently running. For best results, however, try to use the + "pg_dumpall" command from PostgreSQL 7.3, since this version contains + bug fixes and improvements over older versions. While this advice might + seem idiosyncratic since you haven't installed the new version yet, it is + advisable to follow it if you plan to install the new version in parallel + with the old version. In that case you can complete the installation + normally and transfer the data later. This will also decrease the + downtime. - "pg_dumpall" does not save large objects. Check the Administrator's - Guide if you need to do this. + 3. If you are installing the new version at the same location as the old one + then shut down the old server, at the latest before you install the new + files: - Make sure that you use the "pg_dumpall" command from the version you - are currently running. 7.2's "pg_dumpall" should not be used on older - databases. + kill -INT `cat /usr/local/pgsql/data/postmaster.pid` - 3. If you are installing the new version at the same location as the old - one then shut down the old server, at the latest before you install the - new files: + Versions prior to 7.0 do not have this "postmaster.pid" file. If you are + using such a version you must find out the process id of the server + yourself, for example by typing "ps ax | grep postmaster", and supply it + to the "kill" command. + On systems that have PostgreSQL started at boot time, there is probably a + start-up file that will accomplish the same thing. For example, on a Red + Hat Linux system one might find that - kill -INT `cat /usr/local/pgsql/data/postmaster.pid` + /etc/rc.d/init.d/postgresql stop - Versions prior to 7.0 do not have this "postmaster.pid" file. If you - are using such a version you must find out the process id of the server - yourself, for example by typing "ps ax | grep postmaster", and supply - it to the "kill" command. + works. Another possibility is "pg_ctl stop". - On systems that have PostgreSQL started at boot time, there is probably - a start-up file that will accomplish the same thing. For example, on a - Red Hat Linux system one might find that + 4. If you are installing in the same place as the old version then it is + also a good idea to move the old installation out of the way, in case you + have trouble and need to revert to it. Use a command like this: - /etc/rc.d/init.d/postgresql stop + mv /usr/local/pgsql /usr/local/pgsql.old - works. Another possibility is "pg_ctl stop". - - 4. If you are installing in the same place as the old version then it is - also a good idea to move the old installation out of the way, in case - you have trouble and need to revert to it. Use a command like this: - - mv /usr/local/pgsql /usr/local/pgsql.old - -After you have installed PostgreSQL 7.2, create a new database directory and +After you have installed PostgreSQL 7.3, create a new database directory and start the new server. Remember that you must execute these commands while -logged in to the special database user account (which you already have if -you are upgrading). +logged in to the special database user account (which you already have if you +are upgrading). -/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data -/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data + /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data + /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data Finally, restore your data with -/usr/local/pgsql/bin/psql -d template1 -f outputfile + /usr/local/pgsql/bin/psql -d template1 -f outputfile using the *new* psql. +These topics are discussed at length in the Administrator's Guide, which you +are encouraged to read in any case. -You can also install the new version in parallel with the old one to -decrease the downtime. These topics are discussed at length in the -Administrator's Guide, which you are encouraged to read in any case. +------------------------------------------------------------------------------- + + Installation Procedure - ------------------------------------------------------------------------ + 1. Configuration + The first step of the installation procedure is to configure the source + tree for your system and choose the options you would like. This is done + by running the "configure" script. For a default installation simply + enter + + ./configure -Installation Procedure + This script will run a number of tests to guess values for various system + dependent variables and detect some quirks of your operating system, and + finally will create several files in the build tree to record what it + found. (You can also run "configure" in a directory outside the source + tree if you want to keep the build directory separate.) + The default configuration will build the server and utilities, as well as + all client applications and interfaces that require only a C compiler. + All files will be installed under "/usr/local/pgsql" by default. + You can customize the build and installation process by supplying one or + more of the following command line options to "configure": - 1. Configuration + --prefix=PREFIX + + Install all files under the directory "PREFIX" instead of "/usr/ + local/pgsql". The actual files will be installed into various + subdirectories; no files will ever be installed directly into the + "PREFIX" directory. + If you have special needs, you can also customize the individual + subdirectories with the following options. + + --exec-prefix=EXEC-PREFIX + + You can install architecture-dependent files under a different + prefix, "EXEC-PREFIX", than what "PREFIX" was set to. This can be + useful to share architecture-independent files between hosts. If + you omit this, then "EXEC-PREFIX" is set equal to "PREFIX" and both + architecture-dependent and independent files will be installed + under the same tree, which is probably what you want. + + --bindir=DIRECTORY + + Specifies the directory for executable programs. The default is + "EXEC-PREFIX/bin", which normally means "/usr/local/pgsql/bin". - The first step of the installation procedure is to configure the source - tree for your system and choose the options you would like. This is - done by running the "configure" script. For a default installation - simply enter + --datadir=DIRECTORY - ./configure + Sets the directory for read-only data files used by the installed + programs. The default is "PREFIX/share". Note that this has nothing + to do with where your database files will be placed. - This script will run a number of tests to guess values for various - system dependent variables and detect some quirks of your operating - system, and finally will create several files in the build tree to - record what it found. + --sysconfdir=DIRECTORY - The default configuration will build the server and utilities, as well - as all client applications and interfaces that require only a C - compiler. All files will be installed under "/usr/local/pgsql" by - default. + The directory for various configuration files, "PREFIX/etc" by + default. - You can customize the build and installation process by supplying one - or more of the following command line options to "configure": + --libdir=DIRECTORY - --prefix=PREFIX + The location to install libraries and dynamically loadable modules. + The default is "EXEC-PREFIX/lib". - Install all files under the directory "PREFIX" instead of - "/usr/local/pgsql". The actual files will be installed into - various subdirectories; no files will ever be installed directly - into the "PREFIX" directory. + --includedir=DIRECTORY - If you have special needs, you can also customize the individual - subdirectories with the following options. + The directory for installing C and C++ header files. The default is + "PREFIX/include". - --exec-prefix=EXEC-PREFIX + --docdir=DIRECTORY - You can install architecture-dependent files under a different - prefix, "EXEC-PREFIX", than what "PREFIX" was set to. This can be - useful to share architecture-independent files between hosts. If - you omit this, then "EXEC-PREFIX" is set equal to "PREFIX" and - both architecture-dependent and independent files will be - installed under the same tree, which is probably what you want. + Documentation files, except "man" pages, will be installed into + this directory. The default is "PREFIX/doc". - --bindir=DIRECTORY + --mandir=DIRECTORY - Specifies the directory for executable programs. The default is - "EXEC-PREFIX/bin", which normally means "/usr/local/pgsql/bin". + The man pages that come with PostgreSQL will be installed under + this directory, in their respective "manx" subdirectories. The + default is "PREFIX/man". + Note: Care has been taken to make it possible to install + PostgreSQL into shared installation locations (such as "/usr/ + local/include") without interfering with the namespace of the + rest of the system. First, the string "/postgresql" is + automatically appended to datadir, sysconfdir, and docdir, + unless the fully expanded directory name already contains the + string "postgres" or "pgsql". For example, if you choose "/usr/ + local" as prefix, the documentation will be installed in "/usr/ + local/doc/postgresql", but if the prefix is "/opt/postgres", + then it will be in "/opt/postgres/doc". The public C header + files of the client interfaces are installed into includedir + and are namespace-clean. The internal header files and the + server header files are installed into private directories + under includedir. See the Programmer's Guide for information + about how to get at the header files for each interface. + Finally, a private subdirectory will also be created, if + appropriate, under libdir for dynamically loadable modules. - --datadir=DIRECTORY + --with-includes=DIRECTORIES - Sets the directory for read-only data files used by the installed - programs. The default is "PREFIX/share". Note that this has - nothing to do with where your database files will be placed. + "DIRECTORIES" is a colon-separated list of directories that will be + added to the list the compiler searches for header files. If you + have optional packages (such as GNU Readline) installed in a non- + standard location, you have to use this option and probably also + the corresponding "--with-libraries" option. + Example: --with-includes=/opt/gnu/include:/usr/sup/include. - --sysconfdir=DIRECTORY + --with-libraries=DIRECTORIES - The directory for various configuration files, "PREFIX/etc" by - default. + "DIRECTORIES" is a colon-separated list of directories to search + for libraries. You will probably have to use this option (and the + corresponding "--with-includes" option) if you have packages + installed in non-standard locations. + Example: --with-libraries=/opt/gnu/lib:/usr/sup/lib. - --libdir=DIRECTORY + --enable-recode - The location to install libraries and dynamically loadable - modules. The default is "EXEC-PREFIX/lib". + Enables single-byte character set recode support. See the + Administrator's Guide about this feature. Note that a more general + form of character set conversion is supported in the default + configuration; this feature is obsolete. - --includedir=DIRECTORY + --enable-nls[=LANGUAGES] - The directory for installing C and C++ header files. The default - is "PREFIX/include". + Enables Native Language Support (NLS), that is, the ability to + display a program's messages in a language other than English. + "LANGUAGES" is a space separated list of codes of the languages + that you want supported, for example --enable-nls='de fr'. (The + intersection between your list and the set of actually provided + translations will be computed automatically.) If you do not specify + a list, then all available translations are installed. + To use this option, you will need an implementation of the gettext + API; see above. - --docdir=DIRECTORY + --with-pgport=NUMBER - Documentation files, except "man" pages, will be installed into - this directory. The default is "PREFIX/doc". + Set "NUMBER" as the default port number for server and clients. The + default is 5432. The port can always be changed later on, but if + you specify it here then both server and clients will have the same + default compiled in, which can be very convenient. Usually the only + good reason to select a non-default value is if you intend to run + multiple PostgreSQL servers on the same machine. - --mandir=DIRECTORY + --with-perl - The man pages that come with PostgreSQL will be installed under - this directory, in their respective "manx" subdirectories. The - default is "PREFIX/man". + Build the PL/Perl server-side language. - Note: Care has been taken to make it possible to install - PostgreSQL into shared installation locations (such as - "/usr/local/include") without interfering with the namespace - of the rest of the system. First, the string "/postgresql" is - automatically appended to datadir, sysconfdir, and docdir, - unless the fully expanded directory name already contains the - string "postgres" or "pgsql". For example, if you choose - "/usr/local" as prefix, the documentation will be installed - in "/usr/local/doc/postgresql", but if the prefix is - "/opt/postgres", then it will be in "/opt/postgres/doc". - Second, the installation layout of the C and C++ header files - has been reorganized in the 7.2 release. The public header - files of the client interfaces are installed into includedir - and are namespace-clean. The internal header files and the - server header files are installed into private directories - under includedir. See the Programmer's Guide for information - about how to get at the header files for each interface. - Finally, a private subdirectory will also be created, if - appropriate, under libdir for dynamically loadable modules. + --with-python - --with-includes=DIRECTORIES + Build the Python interface module and the PL/Python server-side + language. You need to have root access to be able to install the + Python module at its default place ("/usr/lib/pythonx.y"). - "DIRECTORIES" is a colon-separated list of directories that will - be added to the list the compiler searches for header files. If - you have optional packages (such as GNU Readline) installed in a - non-standard location, you have to use this option and probably - also the corresponding "--with-libraries" option. + --with-tcl - Example: --with-includes=/opt/gnu/include:/usr/sup/include. + Build components that require Tcl/Tk, which are libpgtcl, pgtclsh, + pgtksh, and PL/Tcl. But see below about "--without-tk". + + --without-tk + + If you specify "--with-tcl" and this option, then the program that + requires Tk (pgtksh) will be excluded. + + --with-tclconfig=DIRECTORY, --with-tkconfig=DIRECTORY + + Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh", which + contain configuration information needed to build modules + interfacing to Tcl or Tk. These files are normally found + automatically at their well-known locations, but if you want to use + a different version of Tcl or Tk you can specify the directory in + which to find them. + + --with-java + + Build the JDBC driver and associated Java packages. + + --with-krb4[=DIRECTORY], --with-krb5[=DIRECTORY] + + Build with support for Kerberos authentication. You can use either + Kerberos version 4 or 5, but not both. The "DIRECTORY" argument + specifies the root directory of the Kerberos installation; "/usr/ + athena" is assumed as default. If the relevant header files and + libraries are not under a common parent directory, then you must + use the "--with-includes" and "--with-libraries" options in + addition to this option. If, on the other hand, the required files + are in a location that is searched by default (e.g., "/usr/lib"), + then you can leave off the argument. + "configure" will check for the required header files and libraries + to make sure that your Kerberos installation is sufficient before + proceeding. - --with-libraries=DIRECTORIES + --with-krb-srvnam=NAME - "DIRECTORIES" is a colon-separated list of directories to search - for libraries. You will probably have to use this option (and the - corresponding "--with-includes" option) if you have packages - installed in non-standard locations. + The name of the Kerberos service principal. postgres is the + default. There's probably no reason to change this. - Example: --with-libraries=/opt/gnu/lib:/usr/sup/lib. + --with-openssl[=DIRECTORY] - --enable-locale + Build with support for SSL (encrypted) connections. This requires + the OpenSSL package to be installed. The "DIRECTORY" argument + specifies the root directory of the OpenSSL installation; the + default is "/usr/local/ssl". + "configure" will check for the required header files and libraries + to make sure that your OpenSSL installation is sufficient before + proceeding. - Enables locale support. There is a performance penalty associated - with locale support, but if you are not in an English-speaking - environment you will most likely need this. + --with-pam - --enable-recode - - Enables single-byte character set recode support. See the - Administrator's Guide about this feature. - - --enable-multibyte - - Allows the use of multibyte character encodings (including - Unicode) and character set encoding conversion. Read the - Administrator's Guide for details. - - Note that some interfaces (such as Tcl or Java) expect all - character strings to be in Unicode, so this option will be - required to correctly support these interfaces. - - --enable-nls[=LANGUAGES] - - Enables Native Language Support (NLS), that is, the ability to - display a program's messages in a language other than English. - "LANGUAGES" is a space separated list of codes of the languages - that you want supported, for example --enable-nls='de fr'. (The - intersection between your list and the set of actually provided - translations will be computed automatically.) If you do not - specify a list, then all available translations are installed. - - To use this option, you will need an implementation of the gettext - API. Some operating systems have this built-in (e.g., Linux, - NetBSD, Solaris), for other systems you can download an add-on - package from here: http://www.postgresql.org/~petere/gettext.html. - If you are using the gettext implementation in the GNU C library - then you will additionally need the GNU gettext package for some - utility programs. For any of the other implementations you will - not need it. - - --with-pgport=NUMBER - - Set "NUMBER" as the default port number for server and clients. - The default is 5432. The port can always be changed later on, but - if you specify it here then both server and clients will have the - same default compiled in, which can be very convenient. Usually - the only good reason to select a non-default value is if you - intend to run multiple PostgreSQL servers on the same machine. - - --with-perl - - Build the Perl interface module. The Perl interface will be - installed at the usual place for Perl modules (typically under - "/usr/lib/perl"), so you must have root access to perform the - installation step (see step 4). You need to have Perl 5 installed - to use this option. - - --with-python - - Build the Python interface module. You need to have root access to - be able to install the Python module at its default place - ("/usr/lib/pythonx.y"). To be able to use this option, you must - have Python installed and your system needs to support shared - libraries. If you instead want to build a new complete interpreter - binary, you will have to do it manually. - - --with-tcl - - Builds components that require Tcl/Tk, which are libpgtcl, - pgtclsh, pgtksh, PgAccess, and PL/Tcl. But see below about - "--without-tk". - - --without-tk - - If you specify "--with-tcl" and this option, then programs that - require Tk (pgtksh and PgAccess) will be excluded. - - --with-tclconfig=DIRECTORY, --with-tkconfig=DIRECTORY - - Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh", which - contain configuration information needed to build modules - interfacing to Tcl or Tk. These files are normally found - automatically at their well-known locations, but if you want to - use a different version of Tcl or Tk you can specify the directory - in which to find them. - - --with-java - - Build the JDBC driver and associated Java packages. This option - requires Ant to be installed (as well as a JDK, of course). Refer - to the JDBC driver documentation in the Programmer's Guide for - more information. - - --with-krb4[=DIRECTORY], --with-krb5[=DIRECTORY] - - Build with support for Kerberos authentication. You can use either - Kerberos version 4 or 5, but not both. The "DIRECTORY" argument - specifies the root directory of the Kerberos installation; - "/usr/athena" is assumed as default. If the relevant header files - and libraries are not under a common parent directory, then you - must use the "--with-includes" and "--with-libraries" options in - addition to this option. If, on the other hand, the required files - are in a location that is searched by default (e.g., "/usr/lib"), - then you can leave off the argument. - - "configure" will check for the required header files and libraries - to make sure that your Kerberos installation is sufficient before - proceeding. - - --with-krb-srvnam=NAME - - The name of the Kerberos service principal. postgres is the - default. There's probably no reason to change this. - - --with-openssl[=DIRECTORY] - - Build with support for SSL (encrypted) connections. This requires - the OpenSSL package to be installed. The "DIRECTORY" argument - specifies the root directory of the OpenSSL installation; the - default is "/usr/local/ssl". - - "configure" will check for the required header files and libraries - to make sure that your OpenSSL installation is sufficient before - proceeding. - - --with-pam - - Build with PAM (Pluggable Authentication Modules) support. - - --enable-syslog - - Enables the PostgreSQL server to use the syslog logging facility. - (Using this option does not mean that you must log with syslog or - even that it will be done by default, it simply makes it possible - to turn that option on at run time.) - - --enable-debug - - Compiles all programs and libraries with debugging symbols. This - means that you can run the programs through a debugger to analyze - problems. This enlarges the size of the installed executables - considerably, and on non-GCC compilers it usually also disables - compiler optimization, causing slowdowns. However, having the - symbols available is extremely helpful for dealing with any - problems that may arise. Currently, this option is recommended for - production installations only if you use GCC. But you should - always have it on if you are doing development work or running a - beta version. - - --enable-cassert - - Enables assertion checks in the server, which test for many "can't - happen" conditions. This is invaluable for code development - purposes, but the tests slow things down a little. Also, having - the tests turned on won't necessarily enhance the stability of - your server! The assertion checks are not categorized for - severity, and so what might be a relatively harmless bug will - still lead to server restarts if it triggers an assertion failure. - Currently, this option is not recommended for production use, but - you should have it on for development work or when running a beta - version. - - --enable-depend - - Enables automatic dependency tracking. With this option, the - makefiles are set up so that all affected object files will be - rebuilt when any header file is changed. This is useful if you are - doing development work, but is just wasted overhead if you intend - only to compile once and install. At present, this option will - work only if you use GCC. - - If you prefer a C or C++ compiler different from the one "configure" - picks then you can set the environment variables CC or CXX, - respectively, to the program of your choice. Similarly, you can - override the default compiler flags with the CFLAGS and CXXFLAGS - variables. For example: - - env CC=/opt/bin/gcc CFLAGS='-O2 -pipe' ./configure - - 2. Build - - To start the build, type - - gmake - - (Remember to use GNU make.) The build may take anywhere from 5 minutes - to half an hour depending on your hardware. The last line displayed - should be - - All of PostgreSQL is successfully made. Ready to install. - - 3. Regression Tests - - If you want to test the newly built server before you install it, you - can run the regression tests at this point. The regression tests are a - test suite to verify that PostgreSQL runs on your machine in the way - the developers expected it to. Type - - gmake check - - (This won't work as root; do it as an unprivileged user.) It is - possible that some tests fail, due to differences in error message - wording or floating point results. The file "src/test/regress/README" - and the Administrator's Guide contain detailed information about - interpreting the test results. You can repeat this test at any later - time by issuing the same command. - - 4. Installing The Files - - Note: If you are upgrading an existing system and are going - to install the new files over the old ones, then you should - have backed up your data and shut down the old server by now, - as explained in the Section called If You Are Upgrading - above. - - To install PostgreSQL enter - - gmake install - - This will install files into the directories that were specified in - step 1. Make sure that you have appropriate permissions to write into - that area. Normally you need to do this step as root. Alternatively, - you could create the target directories in advance and arrange for - appropriate permissions to be granted. - - If you built the Perl or Python interfaces and you were not the root - user when you executed the above command then that part of the - installation probably failed. In that case you should become the root - user and then do - - gmake -C src/interfaces/perl5 install - gmake -C src/interfaces/python install - - If you do not have superuser access you are on your own: you can still - take the required files and place them in other directories where Perl - or Python can find them, but how to do that is left as an exercise. - - The standard installation provides only the header files needed for - client application development. If you plan to do any server-side - program development (such as custom functions or data types written in - C), then you may want to install the entire PostgreSQL include tree - into your target include directory. To do that, enter - - gmake install-all-headers - - This adds a megabyte or two to the installation footprint, and is only - useful if you don't plan to keep the whole source tree around for - reference. (If you do, you can just use the source's include directory - when building server-side software.) - - Client-only installation: If you want to install only the client - applications and interface libraries, then you can use these commands: - - gmake -C src/bin install - gmake -C src/include install - gmake -C src/interfaces install - gmake -C doc install - - To undo the installation use the command "gmake uninstall". However, - this will not remove any created directories. - -After the installation you can make room by removing the built files from -the source tree with the "gmake clean" command. This will preserve the files -made by the configure program, so that you can rebuild everything with + Build with PAM (Pluggable Authentication Modules) support. + + --without-readline + + Prevents the use of the Readline library. This disables command- + line editing and history in psql, so it is not recommended. + + --without-zlib + + Prevents the use of the Zlib library. This disables compression + support in pg_dump. This option is only intended for those rare + systems where this library is not available. + + --enable-debug + + Compiles all programs and libraries with debugging symbols. This + means that you can run the programs through a debugger to analyze + problems. This enlarges the size of the installed executables + considerably, and on non-GCC compilers it usually also disables + compiler optimization, causing slowdowns. However, having the + symbols available is extremely helpful for dealing with any + problems that may arise. Currently, this option is recommended for + production installations only if you use GCC. But you should always + have it on if you are doing development work or running a beta + version. + + --enable-cassert + + Enables assertion checks in the server, which test for many "can't + happen" conditions. This is invaluable for code development + purposes, but the tests slow things down a little. Also, having the + tests turned on won't necessarily enhance the stability of your + server! The assertion checks are not categorized for severity, and + so what might be a relatively harmless bug will still lead to + server restarts if it triggers an assertion failure. Currently, + this option is not recommended for production use, but you should + have it on for development work or when running a beta version. + + --enable-depend + + Enables automatic dependency tracking. With this option, the + makefiles are set up so that all affected object files will be + rebuilt when any header file is changed. This is useful if you are + doing development work, but is just wasted overhead if you intend + only to compile once and install. At present, this option will work + only if you use GCC. + + If you prefer a C compiler different from the one "configure" picks then + you can set the environment variable CC to the program of your choice. By + default, "configure" will pick "gcc" unless this is inappropriate for the + platform. Similarly, you can override the default compiler flags with the + CFLAGS variable. + + You can specify environment variables on the "configure" command line, + for example: + + ./configure CC=/opt/bin/gcc CFLAGS='-O2 -pipe' + + 2. Build + To start the build, type + + gmake + + (Remember to use GNU make.) The build may take anywhere from 5 minutes to + half an hour depending on your hardware. The last line displayed should + be + + All of PostgreSQL is successfully made. Ready to install. + + 3. Regression Tests + If you want to test the newly built server before you install it, you can + run the regression tests at this point. The regression tests are a test + suite to verify that PostgreSQL runs on your machine in the way the + developers expected it to. Type + + gmake check + + (This won't work as root; do it as an unprivileged user.) It is possible + that some tests fail, due to differences in error message wording or + floating point results. The file "src/test/regress/README" and the + Administrator's Guide contain detailed information about interpreting the + test results. You can repeat this test at any later time by issuing the + same command. + + 4. Installing The Files + Note: If you are upgrading an existing system and are going to + install the new files over the old ones, then you should have + backed up your data and shut down the old server by now, as + explained in the Section called If You Are Upgrading above. + To install PostgreSQL enter + + gmake install + + This will install files into the directories that were specified in step + 1. Make sure that you have appropriate permissions to write into that + area. Normally you need to do this step as root. Alternatively, you could + create the target directories in advance and arrange for appropriate + permissions to be granted. + You can use gmake install-strip instead of gmake install to strip the + executable files and libraries as they are installed. This will save some + space. If you built with debugging support, stripping will effectively + remove the debugging support, so it should only be done if debugging is + no longer needed. install-strip tries to do a reasonable job saving + space, but it does not have perfect knowledge of how to strip every + unneeded byte from an executable file, so if you want to save all the + disk space you possibly can, you will have to do manual work. + If you built the Python interfaces and you were not the root user when + you executed the above command then that part of the installation + probably failed. In that case you should become the root user and then do + + gmake -C src/interfaces/python install + + If you do not have superuser access you are on your own: you can still + take the required files and place them in other directories where Python + can find them, but how to do that is left as an exercise. + The standard installation provides only the header files needed for + client application development. If you plan to do any server-side program + development (such as custom functions or data types written in C), then + you may want to install the entire PostgreSQL include tree into your + target include directory. To do that, enter + + gmake install-all-headers + + This adds a megabyte or two to the installation footprint, and is only + useful if you don't plan to keep the whole source tree around for + reference. (If you do, you can just use the source's include directory + when building server-side software.) + Client-only installation: If you want to install only the client + applications and interface libraries, then you can use these commands: + + gmake -C src/bin install + gmake -C src/include install + gmake -C src/interfaces install + gmake -C doc install + +Uninstallation: To undo the installation use the command "gmake uninstall". +However, this will not remove any created directories. +Cleaning: After the installation you can make room by removing the built files +from the source tree with the command "gmake clean". This will preserve the +files made by the configure program, so that you can rebuild everything with "gmake" later on. To reset the source tree to the state in which it was distributed, use "gmake distclean". If you are going to build for several -platforms from the same source tree you must do this and re-configure for -each build. - +platforms from the same source tree you must do this and re-configure for each +build. If you perform a build and then discover that your configure options were wrong, or if you change anything that configure investigates (for example, -you install GNU Readline), then it's a good idea to do "gmake distclean" -before reconfiguring and rebuilding. Without this, your changes in -configuration choices may not propagate everywhere they need to. +software upgrades), then it's a good idea to do "gmake distclean" before +reconfiguring and rebuilding. Without this, your changes in configuration +choices may not propagate everywhere they need to. - ------------------------------------------------------------------------ +------------------------------------------------------------------------------- -Post-Installation Setup + Post-Installation Setup Shared Libraries -On some systems that have shared libraries (which most systems do) you need -to tell your system how to find the newly installed shared libraries. The -systems on which this is *not* necessary include BSD/OS, FreeBSD, HP-UX, -IRIX, Linux, NetBSD, OpenBSD, Tru64 UNIX (formerly Digital UNIX), and -Solaris. - -The method to set the shared library search path varies between platforms, -but the most widely usable method is to set the environment variable +On some systems that have shared libraries (which most systems do) you need to +tell your system how to find the newly installed shared libraries. The systems +on which this is *not* necessary include BSD/OS, FreeBSD, HP-UX, IRIX, Linux, +NetBSD, OpenBSD, Tru64 UNIX (formerly Digital UNIX), and Solaris. +The method to set the shared library search path varies between platforms, but +the most widely usable method is to set the environment variable LD_LIBRARY_PATH like so: In Bourne shells ("sh", "ksh", "bash", "zsh") -LD_LIBRARY_PATH=/usr/local/pgsql/lib -export LD_LIBRARY_PATH + LD_LIBRARY_PATH=/usr/local/pgsql/lib + export LD_LIBRARY_PATH or in "csh" or "tcsh" -setenv LD_LIBRARY_PATH /usr/local/pgsql/lib - -Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in step 1. -You should put these commands into a shell start-up file such as -"/etc/profile" or "~/.bash_profile". Some good information about the caveats -associated with this method can be found at -http://www.visi.com/~barr/ldpath.html. + setenv LD_LIBRARY_PATH /usr/local/pgsql/lib +Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in step 1. You +should put these commands into a shell start-up file such as "/etc/profile" or +"~/.bash_profile". Some good information about the caveats associated with this +method can be found at http://www.visi.com/~barr/ldpath.html. On some systems it might be preferable to set the environment variable LD_RUN_PATH *before* building. - +On Cygwin, put the library directory in the PATH or move the ".dll" files into +the "bin/" directory. If in doubt, refer to the manual pages of your system (perhaps "ld.so" or "rld"). If you later on get a message like -psql: error in loading shared libraries -libpq.so.2.1: cannot open shared object file: No such file or directory + psql: error in loading shared libraries + libpq.so.2.1: cannot open shared object file: No such file or directory then this step was necessary. Simply take care of it then. - If you are on BSD/OS, Linux, or SunOS 4 and you have root access you can run -/sbin/ldconfig /usr/local/pgsql/lib + /sbin/ldconfig /usr/local/pgsql/lib -(or equivalent directory) after installation to enable the run-time linker -to find the shared libraries faster. Refer to the manual page of "ldconfig" -for more information. On FreeBSD, NetBSD, and OpenBSD the command is +(or equivalent directory) after installation to enable the run-time linker to +find the shared libraries faster. Refer to the manual page of "ldconfig" for +more information. On FreeBSD, NetBSD, and OpenBSD the command is -/sbin/ldconfig -m /usr/local/pgsql/lib + /sbin/ldconfig -m /usr/local/pgsql/lib instead. Other systems are not known to have an equivalent command. - ------------------------------------------------------------------------ +------------------------------------------------------------------------------- Environment Variables If you installed into "/usr/local/pgsql" or some other location that is not -searched for programs by default, you need to add "/usr/local/pgsql/bin" (or -whatever you set "--bindir" to in step 1) into your PATH. To do this, add -the following to your shell start-up file, such as "~/.bash_profile" (or -"/etc/profile", if you want it to affect every user): +searched for programs by default, you should add "/usr/local/pgsql/bin" (or +whatever you set "--bindir" to in step 1) into your PATH. Strictly speaking, +this is not necessary, but it will make the use of PostgreSQL much more +convenient. +To do this, add the following to your shell start-up file, such as +"~/.bash_profile" (or "/etc/profile", if you want it to affect every user): -PATH=/usr/local/pgsql/bin:$PATH + PATH=/usr/local/pgsql/bin:$PATH + export PATH If you are using "csh" or "tcsh", then use this command: -set path = ( /usr/local/pgsql/bin $path ) + set path = ( /usr/local/pgsql/bin $path ) To enable your system to find the man documentation, you need to add a line -like the following to a shell start-up file: +like the following to a shell start-up file unless you installed into a +location that is searched by default. -MANPATH=/usr/local/pgsql/man:$MANPATH + MANPATH=/usr/local/pgsql/man:$MANPATH + export MANPATH -The environment variables PGHOST and PGPORT specify to client applications -the host and port of the database server, overriding the compiled-in -defaults. If you are going to run client applications remotely then it is -convenient if every user that plans to use the database sets PGHOST. This is -not required, however: the settings can be communicated via command line -options to most client programs. +The environment variables PGHOST and PGPORT specify to client applications the +host and port of the database server, overriding the compiled-in defaults. If +you are going to run client applications remotely then it is convenient if +every user that plans to use the database sets PGHOST. This is not required, +however: the settings can be communicated via command line options to most +client programs. - ------------------------------------------------------------------------ +------------------------------------------------------------------------------- -Getting Started + Getting Started -The following is a quick summary of how to get PostgreSQL up and running -once installed. The Administrator's Guide contains more information. +The following is a quick summary of how to get PostgreSQL up and running once +installed. The Administrator's Guide contains more information. - 1. Create a user account for the PostgreSQL server. This is the user the - server will run as. For production use you should create a separate, - unprivileged account ("postgres" is commonly used). If you do not have - root access or just want to play around, your own user account is - enough, but running the server as root is a security risk and will not - work. + 1. Create a user account for the PostgreSQL server. This is the user the + server will run as. For production use you should create a separate, + unprivileged account ("postgres" is commonly used). If you do not have + root access or just want to play around, your own user account is enough, + but running the server as root is a security risk and will not work. - adduser postgres + adduser postgres - 2. Create a database installation with the "initdb" command. To run - "initdb" you must be logged in to your PostgreSQL server account. It - will not work as root. + 2. Create a database installation with the "initdb" command. To run "initdb" + you must be logged in to your PostgreSQL server account. It will not work + as root. - root# mkdir /usr/local/pgsql/data - root# chown postgres /usr/local/pgsql/data - root# su - postgres - postgres$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data + root# mkdir /usr/local/pgsql/data + root# chown postgres /usr/local/pgsql/data + root# su - postgres + postgres$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data - The "-D" option specifies the location where the data will be stored. - You can use any path you want, it does not have to be under the - installation directory. Just make sure that the server account can - write to the directory (or create it, if it doesn't already exist) - before starting "initdb", as illustrated here. + The "-D" option specifies the location where the data will be stored. You + can use any path you want, it does not have to be under the installation + directory. Just make sure that the server account can write to the + directory (or create it, if it doesn't already exist) before starting + "initdb", as illustrated here. - 3. The previous step should have told you how to start up the database - server. Do so now. The command should look something like + 3. The previous step should have told you how to start up the database + server. Do so now. The command should look something like - /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data + /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data - This will start the server in the foreground. To put the server in the - background use something like + This will start the server in the foreground. To put the server in the + background use something like - nohup /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data \ - >server.log 2>&1 >server.log 2>&1 or , not to the people listed here. + ________________________________________________________________________________ +|OS______|Processor__|Version|Reported_________________________|Remarks__________| +|AIX |RS6000 |7.3 |2002-11-12, Andreas Zeugswetter |see also doc/ | +|________|___________|_______|()______|FAQ_AIX__________| +|BSD/OS |x86 |7.3 |2002-10-25, Bruce Momjian |4.2 | +|________|___________|_______|()_______|_________________| +|FreeBSD |Alpha |7.3 |2002-11-13, Chris Kings-Lynne | | +|________|___________|_______|()__|_________________| +|FreeBSD |x86 |7.3 |2002-10-29, 3.3, Nigel J. Andrews| | +| | | |(),| | +| | | |4.7, Larry Rosenman | | +| | | |(), 5.0, Sean | | +| | | |Chittenden | | +|________|___________|_______|()__________|_________________| +|HP-UX |PA-RISC |7.3 |2002-10-28, 10.20 Tom Lane |gcc and cc; see | +| | | |(), 11.00, |also doc/FAQ_HPUX| +| | | |11.11, 32 & 64 bit, Giles Lean | | +|________|___________|_______|()_________|_________________| +|IRIX |MIPS |7.3 |2002-10-27, Ian Barwick |Irix64 Komma 6.5 | +|________|___________|_______|()______________|_________________| +|Linux |Alpha |7.3 |2002-10-28, Magnus Naeslund |2.4.19-pre6 | +|________|___________|_______|()_________________|_________________| +|Linux |armv4l |7.2 |2001-12-10, Mark Knox |2.2.x | +|________|___________|_______|()________|_________________| +|Linux |MIPS |7.2 |2001-11-15, Hisao Shibuya |2.0.x; Cobalt | +|________|___________|_______|()__________|Qube2____________| +|Linux |PlayStation|7.2 |2001-12-12, Permaine Cheung |#undef | +| |2 | |) |HAS_TEST_AND_SET,| +|________|___________|_______|_________________________________|slock_t__________| +|Linux |PPC74xx |7.3 |2002-10-26, Tom Lane |bye 2.2.18; Apple| +|________|___________|_______|()____________|G3_______________| +|Linux |S/390 |7.2 |2001-12-12, Permaine Cheung | | +|________|___________|_______|)____________|_________________| +|Linux |Sparc |7.3 |2002-10-26, Doug McNaught |3.0 | +|________|___________|_______|()____________|_________________| +|Linux |x86 |7.3 |2002-10-26, Alvaro Herrera |2.4 | +|________|___________|_______|()_______|_________________| +|MacOS X |PPC |7.3 |2002-10-28, 10.1, Tom Lane | | +| | | |(), 10.2.1, | | +| | | |Adam Witney | | +|________|___________|_______|()__________|_________________| +|NetBSD |Alpha |7.2 |2001-11-20, Thomas Thai |1.5W | +|________|___________|_______|()____________|_________________| +|NetBSD |arm32 |7.3 |2002-11-19, Patrick Welche |1.6 | +|________|___________|_______|()_________|_________________| +|NetBSD |m68k |7.0 |2000-04-10, Henry B. Hotz |Mac 8xx | +|________|___________|_______|()____________|_________________| +|NetBSD |MIPS |7.2.1 |2002-06-13, Warwick Hunter |1.5.3 | +|________|___________|_______|()_____________|_________________| +|NetBSD |PPC |7.2 |2001-11-28, Bill Studenmund |1.5 | +|________|___________|_______|()__________|_________________| +|NetBSD |Sparc |7.2 |2001-12-03, Matthew Green |32- and 64-bit | +|________|___________|_______|()____________|builds___________| +|NetBSD |VAX |7.1 |2001-03-30, Tom I. Helbekkmo |1.5 | +|________|___________|_______|()______________|_________________| +|NetBSD |x86 |7.3 |2002-11-14, Patrick Welche |1.6 | +|________|___________|_______|()_________|_________________| +|OpenBSD |Sparc |7.3 |2002-11-17, Christopher Kings- |3.2 | +| | | |Lynne | | +|________|___________|_______|()__|_________________| +|OpenBSD |x86 |7.3 |2002-11-14, 3.1 Magnus Naeslund | | +| | | |(), 3.2 Christopher| | +| | | |Kings-Lynne | | +|________|___________|_______|()__|_________________| +|Solaris |Sparc |7.3 |2002-10-28, Andrew Sullivan |Solaris 7 & 8; | +| | | |() |see also doc/ | +|________|___________|_______|_________________________________|FAQ_Solaris______| +|Solaris |x86 |7.2 |2001-11-28, Martin Renters |2.8; see also | +|________|___________|_______|()___________|doc/FAQ_Solaris__| +|SunOS 4 |Sparc |7.2 |2001-12-04, Tatsuo Ishii ()________________|_________________| +|Tru64 |Alpha |7.3 |2002-11-05, Alessio Bragadini | | +|UNIX____|___________|_______|()_________|_________________| +|UnixWare|x86 |7.3 |2002-11-01, 7.1.3 Larry Rosenman |see also doc/ | +| | | |(), 7.1.1 and |FAQ_SCO | +| | | |7.1.2(8.0.0) Olivier Prenant | | +|________|___________|_______|()_______________|_________________| +|Windows |x86 |7.3 |2002-10-29, Dave Page |with Cygwin; see | +| | | |(), |doc/FAQ_MSWIN | +| | | |Jason Tishler | | +|________|___________|_______|()____________|_________________| +|Windows |x86 |7.3 |2002-11-05, Dave Page |native is client-| +| | | |() |side only; see | +| | | | |Administrator's | +|________|___________|_______|_________________________________|Guide____________| - Note: If you are having problems with the installation on a - supported platform, please write to or - , not to the people listed here. +Unsupported Platforms: The following platforms are either known not to work, or +they used to work in a previous release and we did not receive explicit +confirmation of a successful test with version 7.3 at the time this list was +compiled. We include these here to let you know that these platforms *could* be +supported if given some attention. + _____________________________________________________________________________ +|OS__________|Processor|Version|Reported_______________________|Remarks_______| +|BeOS |x86 |7.2 |2001-11-29, Cyril Velter |needs updates | +| | | |()|to semaphore | +|____________|_________|_______|_______________________________|code__________| +|DG/UX |m88k |6.3 |1998-03-01, Brian E Gallew |no recent | +|5.4R4.11____|_________|_______|()______________|reports_______| +|MkLinux DR1 |PPC750 |7.0 |2001-04-03, Tatsuo Ishii ()______________|update?_______| +|NeXTSTEP |x86 |6.x |1998-03-01, David Wetzel |bit rot | +|____________|_________|_______|()___________|suspected_____| +|QNX 4 RTOS |x86 |7.2 |2001-12-10, Bernd Tegge |needs updates | +| | | |() |to semaphore | +| | | | |code; see also| +|____________|_________|_______|_______________________________|doc/FAQ_QNX4__| +|QNX RTOS v6 |x86 |7.2 |2001-11-20, Igor Kovalenko |patches | +| | | |()|available in | +| | | | |archives, but | +| | | | |too late for | +|____________|_________|_______|_______________________________|7.2___________| +|SCO |x86 |6.5 |1999-05-25, Andrew Merrill |7.2 should | +|OpenServer 5| | |() |work, but no | +| | | | |reports; see | +| | | | |also doc/ | +|____________|_________|_______|_______________________________|FAQ_SCO_______| +|System V R4 |m88k |6.2.1 |1998-03-01, Doug Winterburn |needs new TAS | +|____________|_________|_______|()______|spinlock_code_| +|System V R4 |MIPS |6.4 |1998-10-28, Frank Ridderbusch |no recent | +|____________|_________|_______|()_____|reports_______| +|Ultrix |MIPS |7.1 |2001-03-26 |TAS spinlock | +| | | | |code not | +|____________|_________|_______|_______________________________|detected______| +|Ultrix______|VAX______|6.x____|1998-03-01_____________________|______________| - OS Processor Version Reported Remarks - AIX RS6000 7.2 2001-12-19, Andreas Zeugswetter see also - (), doc/FAQ_AIX - Tatsuo Ishii - () - BeOS x86 7.2 2001-11-29, Cyril Velter 5.0.4 - () - BSD/OS x86 7.2 2001-11-27, Bruce Momjian 4.2 - () - FreeBSDAlpha 7.2 2001-12-18, Chris Kings-Lynne - () - FreeBSDx86 7.2 2001-11-14, Chris Kings-Lynne - () - HP-UX PA-RISC 7.2 2001-11-29, Joseph Conway 11.00 and 10.20; - (), Tom see also - Lane () doc/FAQ_HPUX - IRIX MIPS 7.2 2001-11-28, Luis Amigo 6.5.13, MIPSPro - () 7.30 - Linux Alpha 7.2 2001-11-16, Tom Lane 2.2.18; tested at - () SourceForge - Linux armv4l 7.2 2001-12-10, Mark Knox 2.2.x - () - Linux MIPS 7.2 2001-11-15, Hisao Shibuya 2.0.x; Cobalt - () Qube2 - Linux PlayStation 7.2 2001-12-12, Permaine Cheung #undef - 2 ) HAS_TEST_AND_SET, - slock_t - Linux PPC74xx 7.2 2001-11-16, Tom Lane 2.2.18; Apple G3 - () - Linux S/390 7.2 2001-12-12, Permaine Cheung - ) - Linux Sparc 7.2 2001-11-28, Doug McNaught 2.2.19 - () - Linux x86 7.2 2001-11-15, Thomas Lockhart 2.0.x, 2.2.x, - () 2.4.x - MacOS XPPC 7.2 2001-11-28, Gavin Sherry 10.1.x - () - NetBSD Alpha 7.2 2001-11-20, Thomas Thai 1.5W - () - NetBSD arm32 7.1 2001-03-21, Patrick Welche 1.5E - () - NetBSD m68k 7.0 2000-04-10, Henry B. Hotz Mac 8xx - () - NetBSD PPC 7.2 2001-11-28, Bill Studenmund 1.5 - () - NetBSD Sparc 7.2 2001-12-03, Matthew Green 32- and 64-bit - () builds - NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo 1.5 - () - NetBSD x86 7.2 2001-11-28, Bill Studenmund 1.5 - () - OpenBSDSparc 7.2 2001-11-27, Brandon Palmer 3.0 - () - OpenBSDx86 7.2 2001-11-26, Brandon Palmer 3.0 - () - Open x86 7.2 2001-11-28, OU-8 Larry Rosenman see also - UNIX (), UW-7 Olivier doc/FAQ_SCO - Prenant () - QNX 4 x86 7.2 2001-12-10, Bernd Tegge 4.25; see also - RTOS () doc/FAQ_QNX4 - SolarisSparc 7.2 2001-11-12, Andrew Sullivan 2.6-8; see also - () doc/FAQ_Solaris - Solarisx86 7.2 2001-11-28, Martin Renters 2.8; see also - () doc/FAQ_Solaris - SunOS 4Sparc 7.2 2001-12-04, Tatsuo Ishii - () - Tru64 Alpha 7.2 2001-11-26, Alessio Bragadini 5.0; 4.0g with cc - UNIX (), Bernd and gcc - Tegge () - Windowsx86 7.2 2001-12-13, Dave Page with Cygwin; see - (), doc/FAQ_MSWIN - Jason Tishler - () - Windowsx86 7.2 2001-12-10, Dave Page native is - () client-side only; - see - Administrator's - Guide - -Unsupported Platforms: The following platforms are either known not to work, -or they used to work in a previous release and we did not receive explicit -confirmation of a successful test with version 7.2 at the time this list was -compiled. We include these here to let you know that these platforms *could* -be supported if given some attention. - - OS Processor Version Reported Remarks - DG/UX m88k 6.3 1998-03-01, Brian E Gallew no recent - 5.4R4.11 () reports - MkLinux DR1PPC750 7.0 2001-04-03, Tatsuo Ishii 7.1 needs OS - () update? - NeXTSTEP x86 6.x 1998-03-01, David Wetzel bit rot - () suspected - QNX RTOS v6x86 7.2 2001-11-20, Igor Kovalenko patches - () available in - archives, - but too late - for 7.2 - SCO x86 6.5 1999-05-25, Andrew Merrill 7.2 should - OpenServer () work, but no - 5 reports; see - also - doc/FAQ_SCO - System V R4m88k 6.2.1 1998-03-01, Doug Winterburn needs new - () TAS spinlock - code - System V R4MIPS 6.4 1998-10-28, Frank Ridderbusch no recent - () reports - Ultrix MIPS 7.1 2001-03-26 TAS spinlock - code not - detected - Ultrix VAX 6.x 1998-03-01