Fix performance problems with autovacuum truncation in busy workloads.

In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.

This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.

While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.

The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.

This problem exists in all supported versions but is infrequently
reported, although some reports of performance problems when
autovacuum runs might be caused by this. Initial commit is just the
master branch, but this should probably be backpatched once the
build farm and general developer usage confirm that there are no
surprising effects.

Jan Wieck
This commit is contained in:
Kevin Grittner 2012-12-11 14:33:08 -06:00
parent e95c4bd113
commit b19e4250b4
5 changed files with 282 additions and 67 deletions

View File

@ -48,6 +48,7 @@
#include "commands/vacuum.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "portability/instr_time.h"
#include "postmaster/autovacuum.h"
#include "storage/bufmgr.h"
#include "storage/freespace.h"
@ -69,6 +70,17 @@
#define REL_TRUNCATE_MINIMUM 1000
#define REL_TRUNCATE_FRACTION 16
/*
* Timing parameters for truncate locking heuristics.
*
* These were not exposed as user tunable GUC values because it didn't seem
* that the potential for improvement was great enough to merit the cost of
* supporting them.
*/
#define AUTOVACUUM_TRUNCATE_LOCK_CHECK_INTERVAL 20 /* ms */
#define AUTOVACUUM_TRUNCATE_LOCK_WAIT_INTERVAL 50 /* ms */
#define AUTOVACUUM_TRUNCATE_LOCK_TIMEOUT 5000 /* ms */
/*
* Guesstimation of number of dead tuples per page. This is used to
* provide an upper limit to memory allocated when vacuuming small
@ -103,6 +115,7 @@ typedef struct LVRelStats
ItemPointer dead_tuples; /* array of ItemPointerData */
int num_index_scans;
TransactionId latestRemovedXid;
bool lock_waiter_detected;
} LVRelStats;
@ -193,6 +206,8 @@ lazy_vacuum_rel(Relation onerel, VacuumStmt *vacstmt,
vacrelstats->old_rel_pages = onerel->rd_rel->relpages;
vacrelstats->old_rel_tuples = onerel->rd_rel->reltuples;
vacrelstats->num_index_scans = 0;
vacrelstats->pages_removed = 0;
vacrelstats->lock_waiter_detected = false;
/* Open all indexes of the relation */
vac_open_indexes(onerel, RowExclusiveLock, &nindexes, &Irel);
@ -259,10 +274,17 @@ lazy_vacuum_rel(Relation onerel, VacuumStmt *vacstmt,
vacrelstats->hasindex,
new_frozen_xid);
/* report results to the stats collector, too */
pgstat_report_vacuum(RelationGetRelid(onerel),
onerel->rd_rel->relisshared,
new_rel_tuples);
/*
* Report results to the stats collector, too. An early terminated
* lazy_truncate_heap attempt suppresses the message and also cancels the
* execution of ANALYZE, if that was ordered.
*/
if (!vacrelstats->lock_waiter_detected)
pgstat_report_vacuum(RelationGetRelid(onerel),
onerel->rd_rel->relisshared,
new_rel_tuples);
else
vacstmt->options &= ~VACOPT_ANALYZE;
/* and log the action if appropriate */
if (IsAutoVacuumWorkerProcess() && Log_autovacuum_min_duration >= 0)
@ -1257,80 +1279,124 @@ lazy_truncate_heap(Relation onerel, LVRelStats *vacrelstats)
BlockNumber old_rel_pages = vacrelstats->rel_pages;
BlockNumber new_rel_pages;
PGRUsage ru0;
int lock_retry;
pg_rusage_init(&ru0);
/*
* We need full exclusive lock on the relation in order to do truncation.
* If we can't get it, give up rather than waiting --- we don't want to
* block other backends, and we don't want to deadlock (which is quite
* possible considering we already hold a lower-grade lock).
* Loop until no more truncating can be done.
*/
if (!ConditionalLockRelation(onerel, AccessExclusiveLock))
return;
/*
* Now that we have exclusive lock, look to see if the rel has grown
* whilst we were vacuuming with non-exclusive lock. If so, give up; the
* newly added pages presumably contain non-deletable tuples.
*/
new_rel_pages = RelationGetNumberOfBlocks(onerel);
if (new_rel_pages != old_rel_pages)
do
{
/*
* Note: we intentionally don't update vacrelstats->rel_pages with the
* new rel size here. If we did, it would amount to assuming that the
* new pages are empty, which is unlikely. Leaving the numbers alone
* amounts to assuming that the new pages have the same tuple density
* as existing ones, which is less unlikely.
* We need full exclusive lock on the relation in order to do
* truncation. If we can't get it, give up rather than waiting --- we
* don't want to block other backends, and we don't want to deadlock
* (which is quite possible considering we already hold a lower-grade
* lock).
*/
vacrelstats->lock_waiter_detected = false;
lock_retry = 0;
while (true)
{
if (ConditionalLockRelation(onerel, AccessExclusiveLock))
break;
/*
* Check for interrupts while trying to (re-)acquire the exclusive
* lock.
*/
CHECK_FOR_INTERRUPTS();
if (++lock_retry > (AUTOVACUUM_TRUNCATE_LOCK_TIMEOUT /
AUTOVACUUM_TRUNCATE_LOCK_WAIT_INTERVAL))
{
/*
* We failed to establish the lock in the specified number of
* retries. This means we give up truncating. Suppress the
* ANALYZE step. Doing an ANALYZE at this point will reset the
* dead_tuple_count in the stats collector, so we will not get
* called by the autovacuum launcher again to do the truncate.
*/
vacrelstats->lock_waiter_detected = true;
ereport(LOG,
(errmsg("automatic vacuum of table \"%s.%s.%s\": "
"cannot (re)acquire exclusive "
"lock for truncate scan",
get_database_name(MyDatabaseId),
get_namespace_name(RelationGetNamespace(onerel)),
RelationGetRelationName(onerel))));
return;
}
pg_usleep(AUTOVACUUM_TRUNCATE_LOCK_WAIT_INTERVAL);
}
/*
* Now that we have exclusive lock, look to see if the rel has grown
* whilst we were vacuuming with non-exclusive lock. If so, give up;
* the newly added pages presumably contain non-deletable tuples.
*/
new_rel_pages = RelationGetNumberOfBlocks(onerel);
if (new_rel_pages != old_rel_pages)
{
/*
* Note: we intentionally don't update vacrelstats->rel_pages with
* the new rel size here. If we did, it would amount to assuming
* that the new pages are empty, which is unlikely. Leaving the
* numbers alone amounts to assuming that the new pages have the
* same tuple density as existing ones, which is less unlikely.
*/
UnlockRelation(onerel, AccessExclusiveLock);
return;
}
/*
* Scan backwards from the end to verify that the end pages actually
* contain no tuples. This is *necessary*, not optional, because
* other backends could have added tuples to these pages whilst we
* were vacuuming.
*/
new_rel_pages = count_nondeletable_pages(onerel, vacrelstats);
if (new_rel_pages >= old_rel_pages)
{
/* can't do anything after all */
UnlockRelation(onerel, AccessExclusiveLock);
return;
}
/*
* Okay to truncate.
*/
RelationTruncate(onerel, new_rel_pages);
/*
* We can release the exclusive lock as soon as we have truncated.
* Other backends can't safely access the relation until they have
* processed the smgr invalidation that smgrtruncate sent out ... but
* that should happen as part of standard invalidation processing once
* they acquire lock on the relation.
*/
UnlockRelation(onerel, AccessExclusiveLock);
return;
}
/*
* Scan backwards from the end to verify that the end pages actually
* contain no tuples. This is *necessary*, not optional, because other
* backends could have added tuples to these pages whilst we were
* vacuuming.
*/
new_rel_pages = count_nondeletable_pages(onerel, vacrelstats);
/*
* Update statistics. Here, it *is* correct to adjust rel_pages
* without also touching reltuples, since the tuple count wasn't
* changed by the truncation.
*/
vacrelstats->pages_removed += old_rel_pages - new_rel_pages;
vacrelstats->rel_pages = new_rel_pages;
if (new_rel_pages >= old_rel_pages)
{
/* can't do anything after all */
UnlockRelation(onerel, AccessExclusiveLock);
return;
}
/*
* Okay to truncate.
*/
RelationTruncate(onerel, new_rel_pages);
/*
* We can release the exclusive lock as soon as we have truncated. Other
* backends can't safely access the relation until they have processed the
* smgr invalidation that smgrtruncate sent out ... but that should happen
* as part of standard invalidation processing once they acquire lock on
* the relation.
*/
UnlockRelation(onerel, AccessExclusiveLock);
/*
* Update statistics. Here, it *is* correct to adjust rel_pages without
* also touching reltuples, since the tuple count wasn't changed by the
* truncation.
*/
vacrelstats->rel_pages = new_rel_pages;
vacrelstats->pages_removed = old_rel_pages - new_rel_pages;
ereport(elevel,
(errmsg("\"%s\": truncated %u to %u pages",
RelationGetRelationName(onerel),
old_rel_pages, new_rel_pages),
errdetail("%s.",
pg_rusage_show(&ru0))));
ereport(elevel,
(errmsg("\"%s\": truncated %u to %u pages",
RelationGetRelationName(onerel),
old_rel_pages, new_rel_pages),
errdetail("%s.",
pg_rusage_show(&ru0))));
old_rel_pages = new_rel_pages;
} while (new_rel_pages > vacrelstats->nonempty_pages &&
vacrelstats->lock_waiter_detected);
}
/*
@ -1342,6 +1408,12 @@ static BlockNumber
count_nondeletable_pages(Relation onerel, LVRelStats *vacrelstats)
{
BlockNumber blkno;
instr_time starttime;
instr_time currenttime;
instr_time elapsed;
/* Initialize the starttime if we check for conflicting lock requests */
INSTR_TIME_SET_CURRENT(starttime);
/* Strange coding of loop control is needed because blkno is unsigned */
blkno = vacrelstats->rel_pages;
@ -1353,6 +1425,36 @@ count_nondeletable_pages(Relation onerel, LVRelStats *vacrelstats)
maxoff;
bool hastup;
/*
* Check if another process requests a lock on our relation. We are
* holding an AccessExclusiveLock here, so they will be waiting. We
* only do this in autovacuum_truncate_lock_check millisecond
* intervals, and we only check if that interval has elapsed once
* every 32 blocks to keep the number of system calls and actual
* shared lock table lookups to a minimum.
*/
if ((blkno % 32) == 0)
{
INSTR_TIME_SET_CURRENT(currenttime);
elapsed = currenttime;
INSTR_TIME_SUBTRACT(elapsed, starttime);
if ((INSTR_TIME_GET_MICROSEC(elapsed) / 1000)
>= AUTOVACUUM_TRUNCATE_LOCK_CHECK_INTERVAL)
{
if (LockHasWaitersRelation(onerel, AccessExclusiveLock))
{
ereport(elevel,
(errmsg("\"%s\": suspending truncate "
"due to conflicting lock request",
RelationGetRelationName(onerel))));
vacrelstats->lock_waiter_detected = true;
return blkno;
}
starttime = currenttime;
}
}
/*
* We don't insert a vacuum delay point here, because we have an
* exclusive lock on the table which we want to hold for as short a

View File

@ -232,6 +232,24 @@ UnlockRelation(Relation relation, LOCKMODE lockmode)
LockRelease(&tag, lockmode, false);
}
/*
* LockHasWaitersRelation
*
* This is a functiion to check if someone else is waiting on a
* lock, we are currently holding.
*/
bool
LockHasWaitersRelation(Relation relation, LOCKMODE lockmode)
{
LOCKTAG tag;
SET_LOCKTAG_RELATION(tag,
relation->rd_lockInfo.lockRelId.dbId,
relation->rd_lockInfo.lockRelId.relId);
return LockHasWaiters(&tag, lockmode, false);
}
/*
* LockRelationIdForSession
*

View File

@ -538,6 +538,98 @@ ProcLockHashCode(const PROCLOCKTAG *proclocktag, uint32 hashcode)
return lockhash;
}
/*
* LockHasWaiters -- look up 'locktag' and check if releasing this
* lock would wake up other processes waiting for it.
*/
bool
LockHasWaiters(const LOCKTAG *locktag, LOCKMODE lockmode, bool sessionLock)
{
LOCKMETHODID lockmethodid = locktag->locktag_lockmethodid;
LockMethod lockMethodTable;
LOCALLOCKTAG localtag;
LOCALLOCK *locallock;
LOCK *lock;
PROCLOCK *proclock;
LWLockId partitionLock;
bool hasWaiters = false;
if (lockmethodid <= 0 || lockmethodid >= lengthof(LockMethods))
elog(ERROR, "unrecognized lock method: %d", lockmethodid);
lockMethodTable = LockMethods[lockmethodid];
if (lockmode <= 0 || lockmode > lockMethodTable->numLockModes)
elog(ERROR, "unrecognized lock mode: %d", lockmode);
#ifdef LOCK_DEBUG
if (LOCK_DEBUG_ENABLED(locktag))
elog(LOG, "LockHasWaiters: lock [%u,%u] %s",
locktag->locktag_field1, locktag->locktag_field2,
lockMethodTable->lockModeNames[lockmode]);
#endif
/*
* Find the LOCALLOCK entry for this lock and lockmode
*/
MemSet(&localtag, 0, sizeof(localtag)); /* must clear padding */
localtag.lock = *locktag;
localtag.mode = lockmode;
locallock = (LOCALLOCK *) hash_search(LockMethodLocalHash,
(void *) &localtag,
HASH_FIND, NULL);
/*
* let the caller print its own error message, too. Do not ereport(ERROR).
*/
if (!locallock || locallock->nLocks <= 0)
{
elog(WARNING, "you don't own a lock of type %s",
lockMethodTable->lockModeNames[lockmode]);
return false;
}
/*
* Check the shared lock table.
*/
partitionLock = LockHashPartitionLock(locallock->hashcode);
LWLockAcquire(partitionLock, LW_SHARED);
/*
* We don't need to re-find the lock or proclock, since we kept their
* addresses in the locallock table, and they couldn't have been removed
* while we were holding a lock on them.
*/
lock = locallock->lock;
LOCK_PRINT("LockHasWaiters: found", lock, lockmode);
proclock = locallock->proclock;
PROCLOCK_PRINT("LockHasWaiters: found", proclock);
/*
* Double-check that we are actually holding a lock of the type we want to
* release.
*/
if (!(proclock->holdMask & LOCKBIT_ON(lockmode)))
{
PROCLOCK_PRINT("LockHasWaiters: WRONGTYPE", proclock);
LWLockRelease(partitionLock);
elog(WARNING, "you don't own a lock of type %s",
lockMethodTable->lockModeNames[lockmode]);
RemoveLocalLock(locallock);
return false;
}
/*
* Do the checking.
*/
if ((lockMethodTable->conflictTab[lockmode] & lock->waitMask) != 0)
hasWaiters = true;
LWLockRelease(partitionLock);
return hasWaiters;
}
/*
* LockAcquire -- Check for lock conflicts, sleep if conflict found,

View File

@ -31,6 +31,7 @@ extern void UnlockRelationOid(Oid relid, LOCKMODE lockmode);
extern void LockRelation(Relation relation, LOCKMODE lockmode);
extern bool ConditionalLockRelation(Relation relation, LOCKMODE lockmode);
extern void UnlockRelation(Relation relation, LOCKMODE lockmode);
extern bool LockHasWaitersRelation(Relation relation, LOCKMODE lockmode);
extern void LockRelationIdForSession(LockRelId *relid, LOCKMODE lockmode);
extern void UnlockRelationIdForSession(LockRelId *relid, LOCKMODE lockmode);

View File

@ -494,6 +494,8 @@ extern void LockReleaseAll(LOCKMETHODID lockmethodid, bool allLocks);
extern void LockReleaseSession(LOCKMETHODID lockmethodid);
extern void LockReleaseCurrentOwner(LOCALLOCK **locallocks, int nlocks);
extern void LockReassignCurrentOwner(LOCALLOCK **locallocks, int nlocks);
extern bool LockHasWaiters(const LOCKTAG *locktag,
LOCKMODE lockmode, bool sessionLock);
extern VirtualTransactionId *GetLockConflicts(const LOCKTAG *locktag,
LOCKMODE lockmode);
extern void AtPrepare_Locks(void);