Building a shlib on AIX requires use of the mkldexport.sh script, but we
failed to install that, preventing its use from non-source-tree contexts.
Also, Makefile.aix had the wrong idea about where to find the installed
copy of the postgres.imp symbol file used by AIX.
Per report from John Pierce. Patch all the way back, since this has been
broken since the beginning of PGXS.
I found that these functions tend to return -1 while leaving an empty error
message string in the PGconn, if they suffer some kind of I/O error on the
file. The reason is that lo_close, which thinks it's executed a perfectly
fine SQL command, clears the errorMessage. The minimum-change workaround
is to reorder operations here so that we don't fill the errorMessage until
after lo_close.
These reference pages still claimed that you have to be superuser to create
a database or schema owned by a different role. That was true before 8.1,
but it was changed in commits aa1110624c and
f91370cd2f to allow assignment of ownership
to any role you are a member of. However, at the time we were thinking of
that primarily as a change to the ALTER OWNER rules, so the need to touch
these two CREATE ref pages got missed.
Apparently this was considered in the original code (see commit
cec3b0a9) but I failed to notice that such entries would always be
skipped by the database check at the start of the loop.
Per bugs #7578 by Nikolay, #6116 by tushar.qa@gmail.com.
The tar output module did some very ugly and ultimately incorrect hacking
on COPY commands to try to get them to work in the context of restoring a
deconstructed tar archive. In particular, it would fail altogether for
table names containing any upper-case characters, since it smashed the
command string to lower-case before modifying it (and, just to add insult
to injury, did that in a way that would fail in multibyte encodings).
I don't see any particular value in being flexible about the case of the
command keywords, since the string will just have been created by
dumpTableData, so let's get rid of the whole case-folding thing.
Also, it doesn't seem to meet the POLA for the script to restore data only
in COPY mode, so add \i commands to make it have comparable behavior in
--inserts mode.
Noted while looking at the tar-output code in connection with Brian
Weaver's patch.
Back-patch portions of commit 05b555d12b.
We need to patch pg_restore to accept either version of the magic string,
in hopes of avoiding compatibility problems when 9.3 comes out. I also
fixed pg_dump to write the correct 2-block EOF marker, since that won't
create a compatibility problem with pg_restore and it could help with some
versions of tar.
Brian Weaver and Tom Lane
The syntax "su -c 'command' username" is not accepted by all versions of
su, for example not OpenBSD's. More portable is "su username -c
'command'". So change runtime.sgml to recommend that syntax. Also,
add a -D switch to the OpenBSD example script, for consistency with other
examples. Per Denis Lapshin and Gábor Hidvégi.
Somewhere along the line, somebody decided to remove all trace of this
notation from the documentation text. It was still in the command syntax
synopses, or at least some of them, but with no indication what it meant.
This will not do, as evidenced by the confusion apparent in bug #7543;
even if the notation is now unnecessary, people will find it in legacy
SQL code and need to know what it does.
The documentation mentioned setting autovacuum_freeze_max_age to
"its maximum allowed value of a little less than two billion".
This led to a post asking about the exact maximum allowed value,
which is precisely two billion, not "a little less".
Based on question by Radovan Jablonovsky. Backpatch to 8.3.
Back-patch commits 9afc648111 and
b8fbbcf37f. The first of these is really
a minor code cleanup to save a few cycles, but it turns out to provide
a workaround for the misoptimization problem described in bug #7516.
The second commit adds a regression test case.
Back-patch the fix to all active branches. The test case only works
as far back as 9.0, because it relies on plpgsql which isn't installed
by default before that. (I didn't have success modifying it into an
all-plperl form that still provoked a crash, though this may just reflect
my lack of Perl-fu.)
validate_plperl_function() supposed that it could free an old
plperl_proc_desc struct immediately upon detecting that it was stale.
However, if a plperl function is called recursively, this could result
in deleting the struct out from under an outer invocation, leading to
misbehavior or crashes. Add a simple reference-count mechanism to
ensure that such structs are freed only when the last reference goes
away.
Per investigation of bug #7516 from Marko Tiikkaja. I am not certain
that this error explains his report, because he says he didn't have
any recursive calls --- but it's hard to see how else it could have
crashed right there. In any case, this definitely fixes some problems
in the area.
Back-patch to all active branches.
Perl, for some unaccountable reason, believes it's a good idea to reset
SIGFPE handling to SIG_IGN. Which wouldn't be a good idea even if it
worked; but on some platforms (Linux at least) it doesn't work at all,
instead resulting in forced process termination if the signal occurs.
Given the lack of other complaints, it seems safe to assume that Perl
never actually provokes SIGFPE and so there is no value in the setting
anyway. Hence, reset it to our normal handler after initializing Perl.
Report, analysis and patch by Andres Freund.
This back-ports commits c8ba697a4b and
e5db11c558, which fix one definite and one
speculative bug in gistchoose, and make the code a lot more intelligible as
well. In 9.2 only, this also affects the largely-copied-and-pasted logic
in gistRelocateBuildBuffersOnSplit.
The impact of the bugs was that the functions might make poor decisions
as to which index tree branch to push a new entry down into, resulting in
GiST index bloat and poor performance. The fixes rectify these decisions
for future insertions, but a REINDEX would be needed to clean up any
existing index bloat.
Alexander Korotkov, Robert Haas, Tom Lane
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
libxslt offers the ability to read and write both files and URLs through
stylesheet commands, thus allowing unprivileged database users to both read
and write data with the privileges of the database server. Disable that
through proper use of libxslt's security options.
Also, remove xslt_process()'s ability to fetch documents and stylesheets
from external files/URLs. While this was a documented "feature", it was
long regarded as a terrible idea. The fix for CVE-2012-3489 broke that
capability, and rather than expend effort on trying to fix it, we're just
going to summarily remove it.
While the ability to write as well as read makes this security hole
considerably worse than CVE-2012-3489, the problem is mitigated by the fact
that xslt_process() is not available unless contrib/xml2 is installed,
and the longstanding warnings about security risks from that should have
discouraged prudent DBAs from installing it in security-exposed databases.
Reported and fixed by Peter Eisentraut.
Security: CVE-2012-3488
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
DST law changes in Morocco; Tokelau has relocated to the other side of
the International Date Line; and apparently Olson had Tokelau's GMT
offset wrong by an hour even before that.
There are also a large number of non-significant changes in this update.
Upstream took the opportunity to remove trailing whitespace, and the
SCCS-style version numbers on the individual files are gone too.
In the original coding of the log rotation stuff, we did not bother to make
the truncation logic work for the very first rotation after postmaster
start (or after a syslogger crash and restart). It just always appended
in that case. It did not seem terribly important at the time, but we've
recently had two separate complaints from people who expected it to work
unsurprisingly. (Both users tend to restart the postmaster about as often
as a log rotation is configured to happen, which is maybe not typical use,
but still...) Since the initial log file is opened in the postmaster,
fixing this requires passing down some more state to the syslogger child
process.
It's always been like this, so back-patch to all supported branches.
This function suppressed any stderr output from the called program, which
is unnecessary in the normal case and unhelpful in error cases. It also
gave a rather opaque message along the lines of "fgets failure: Success"
in case the called program failed to return anything on stdout. Since
we've seen multiple reports of people not understanding what's wrong when
pg_ctl reports this, improve the message.
Back-patch to all active branches.
In the original coding of the autovacuum cancel feature, commit
acac68b2bc, an autovacuum process was
considered a target for cancellation if it was found to hard-block any
process examined in the deadlock search. This patch tightens the test so
that the autovacuum must directly hard-block the current process. This
should make the behavior more predictable in general, and in particular
it ensures that an autovacuum will not be canceled with less than
deadlock_timeout grace period. In the old coding, it was possible for an
autovacuum to be canceled almost instantly, given unfortunate timing of two
or more other processes' lock attempts.
This also justifies the logging methodology in the recent commit
d7318d43d891bd63e82dcfc27948113ed7b1db80; without this restriction, that
patch isn't providing enough information to see the connection of the
canceling process to the autovacuum. Like that one, patch all the way
back.
The old message was at DEBUG2, so typically it didn't show up in the
log at all. As a result, in most cases where autovacuum was canceled,
the only information that was logged was the table being vacuumed,
with no indication as to what problem caused the cancel. Crank up
the level to LOG and add some more details to assist with debugging.
Back-patch all the way, per discussion on pgsql-hackers.
If a crash occurred immediately after the first nextval() call for a serial
column, WAL replay would restore the sequence to a state in which it
appeared that no nextval() had been done, thus allowing the first sequence
value to be returned again by the next nextval() call; as reported in
bug #6748 from Xiangming Mei.
More generally, the problem would occur if an ALTER SEQUENCE was executed
on a freshly created or reset sequence. (The manifestation with serial
columns was introduced in 8.2 when we added an ALTER SEQUENCE OWNED BY step
to serial column creation.) The cause is that sequence creation attempted
to save one WAL entry by writing out a WAL record that made it appear that
the first nextval() had already happened (viz, with is_called = true),
while marking the sequence's in-database state with log_cnt = 1 to show
that the first nextval() need not emit a WAL record. However, ALTER
SEQUENCE would emit a new WAL entry reflecting the actual in-database state
(with is_called = false). Then, nextval would allocate the first sequence
value and set is_called = true, but it would trust the log_cnt value and
not emit any WAL record. A crash at this point would thus restore the
sequence to its post-ALTER state, causing the next nextval() call to return
the first sequence value again.
To fix, get rid of the idea of logging an is_called status different from
reality. This means that the first nextval-driven WAL record will happen
at the first nextval call not the second, but the marginal cost of that is
pretty negligible. In addition, make sure that ALTER SEQUENCE resets
log_cnt to zero in any case where it touches sequence parameters that
affect future nextval results. This will result in some user-visible
changes in the contents of a sequence's log_cnt column, as reflected in the
patch's regression test changes; but no application should be depending on
that anyway, since it was already true that log_cnt changes rather
unpredictably depending on checkpoint timing.
In addition, make some basically-cosmetic improvements to get rid of
sequence.c's undesirable intimacy with page layout details. It was always
really trying to WAL-log the contents of the sequence tuple, so we should
have it do that directly using a HeapTuple's t_data and t_len, rather than
backing into it with some magic assumptions about where the tuple would be
on the sequence's page.
Back-patch to all supported branches.
When a whole-row Var is reading the result of a subquery, we need it to
ignore any "resjunk" columns that the subquery might have evaluated for
GROUP BY or ORDER BY purposes. We've hacked this area before, in commit
68e40998d0, but that fix only covered
whole-row Vars of named composite types, not those of RECORD type; and it
was mighty klugy anyway, since it just assumed without checking that any
extra columns in the result must be resjunk. A proper fix requires getting
hold of the subquery's targetlist so we can actually see which columns are
resjunk (whereupon we can use a JunkFilter to get rid of them). So bite
the bullet and add some infrastructure to make that possible.
Per report from Andrew Dunstan and additional testing by Merlin Moncure.
Back-patch to all supported branches. In 8.3, also back-patch commit
292176a118, which for some reason I had
not done at the time, but it's a prerequisite for this change.
In all branches back to 8.3, this patch fixes a questionable assumption in
CompactCheckpointerRequestQueue/CompactBgwriterRequestQueue that there are
no uninitialized pad bytes in the request queue structs. This would only
cause trouble if (a) there were such pad bytes, which could happen in 8.4
and up if the compiler makes enum ForkNumber narrower than 32 bits, but
otherwise would require not-currently-planned changes in the widths of
other typedefs; and (b) the kernel has not uniformly initialized the
contents of shared memory to zeroes. Still, it seems a tad risky, and we
can easily remove any risk by pre-zeroing the request array for ourselves.
In addition to that, we need to establish a coding rule that struct
RelFileNode can't contain any padding bytes, since such structs are copied
into the request array verbatim. (There are other places that are assuming
this anyway, it turns out.)
In 9.1 and up, the risk was a bit larger because we were also effectively
assuming that struct RelFileNodeBackend contained no pad bytes, and with
fields of different types in there, that would be much easier to break.
However, there is no good reason to ever transmit fsync or delete requests
for temp files to the bgwriter/checkpointer, so we can revert the request
structs to plain RelFileNode, getting rid of the padding risk and saving
some marginal number of bytes and cycles in fsync queue manipulation while
we are at it. The savings might be more than marginal during deletion of
a temp relation, because the old code transmitted an entirely useless but
nonetheless expensive-to-process ForgetRelationFsync request to the
background process, and also had the background process perform the file
deletion even though that can safely be done immediately.
In addition, make some cleanup of nearby comments and small improvements to
the code in CompactCheckpointerRequestQueue/CompactBgwriterRequestQueue.
rfree() failed to cope with the case that pg_regcomp() had initialized the
regex_t struct but then failed to allocate any memory for re->re_guts (ie,
the first malloc call in pg_regcomp() failed). It would try to touch the
guts struct anyway, and thus dump core. This is a sufficiently narrow
corner case that it's not surprising it's never been seen in the field;
but still a bug is a bug, so patch all active branches.
Noted while investigating whether we need to call pg_regfree after a
failure return from pg_regcomp. Other than this bug, it turns out we
don't, so adjust comments appropriately.
Previously, pattern_fixed_prefix() was defined to return whatever fixed
prefix it could extract from the pattern, plus the "rest" of the pattern.
That definition was sensible for LIKE patterns, but not so much for
regexes, where reconstituting a valid pattern minus the prefix could be
quite tricky (certainly the existing code wasn't doing that correctly).
Since the only thing that callers ever did with the "rest" of the pattern
was to pass it to like_selectivity() or regex_selectivity(), let's cut out
the middle-man and just have pattern_fixed_prefix's subroutines do this
directly. Then pattern_fixed_prefix can return a simple selectivity
number, and the question of how to cope with partial patterns is removed
from its API specification.
While at it, adjust the API spec so that callers who don't actually care
about the pattern's selectivity (which is a lot of them) can pass NULL for
the selectivity pointer to skip doing the work of computing a selectivity
estimate.
This patch is only an API refactoring that doesn't actually change any
processing, other than allowing a little bit of useless work to be skipped.
However, it's necessary infrastructure for my upcoming fix to regex prefix
extraction, because after that change there won't be any simple way to
identify the "rest" of the regex, not even to the low level of fidelity
needed by regex_selectivity. We can cope with that if regex_fixed_prefix
and regex_selectivity communicate directly, but not if we have to work
within the old API. Hence, back-patch to all active branches.
join_path_components() tried to remove leading ".." components from its
tail argument, but it was not nearly bright enough to do so correctly
unless the head argument was (a) absolute and (b) canonicalized.
Rather than try to fix that logic, let's just get rid of it: there is no
correctness reason to remove "..", and cosmetic concerns can be taken
care of by a subsequent canonicalize_path() call. Per bug #6715 from
Greg Davidson.
Back-patch to all supported branches. It appears that pre-9.2, this
function is only used with absolute paths as head arguments, which is why
we'd not noticed the breakage before. However, third-party code might be
expecting this function to work in more general cases, so it seems wise
to back-patch.
In HEAD and 9.2, also make some minor cosmetic improvements to callers.
If a CHECK constraint or index definition contained a whole-row Var (that
is, "table.*"), an attempt to copy that definition via CREATE TABLE LIKE or
table inheritance produced incorrect results: the copied Var still claimed
to have the rowtype of the source table, rather than the created table.
For the LIKE case, it seems reasonable to just throw error for this
situation, since the point of LIKE is that the new table is not permanently
coupled to the old, so there's no reason to assume its rowtype will stay
compatible. In the inheritance case, we should ideally allow such
constraints, but doing so will require nontrivial refactoring of CREATE
TABLE processing (because we'd need to know the OID of the new table's
rowtype before we adjust inherited CHECK constraints). In view of the lack
of previous complaints, that doesn't seem worth the risk in a back-patched
bug fix, so just make it throw error for the inheritance case as well.
Along the way, replace change_varattnos_of_a_node() with a more robust
function map_variable_attnos(), which is capable of being extended to
handle insertion of ConvertRowtypeExpr whenever we get around to fixing
the inheritance case nicely, and in the meantime it returns a failure
indication to the caller so that a helpful message with some context can be
thrown. Also, this code will do the right thing with subselects (if we
ever allow them in CHECK or indexes), and it range-checks varattnos before
using them to index into the map array.
Per report from Sergey Konoplev. Back-patch to all supported branches.
This backports commit 7f242d880b,
except for the counter in pg_stat_bgwriter. The underlying problem
(namely, that a full fsync request queue causes terrible checkpoint
behavior) continues to be reported in the wild, and this code seems
to be safe and robust enough to risk back-porting the fix.
Repeated execution of an uncorrelated ARRAY_SUBLINK sub-select (which
I think can only happen if the sub-select is embedded in a larger,
correlated subquery) would leak memory for the duration of the query,
due to not reclaiming the array generated in the previous execution.
Per bug #6698 from Armando Miraglia. Diagnosis and fix idea by Heikki,
patch itself by me.
This has been like this all along, so back-patch to all supported versions.
It failed to check for error return from xsltApplyStylesheet(), as reported
by Peter Gagarinov. (So far as I can tell, libxslt provides no convenient
way to get a useful error message in failure cases. There might be some
inconvenient way, but considering that this code is deprecated it's hard to
get enthusiastic about putting lots of work into it. So I just made it say
"failed to apply stylesheet", in line with the existing error checks.)
While looking at the code I also noticed that the string returned by
xsltSaveResultToString was never freed, resulting in a session-lifespan
memory leak.
Back-patch to all supported versions.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed and backpatched by Simon Riggs
Tom Lane
Alvaro Herrera
Heikki Linnakangas
Peter Eisentraut
Kevin Grittner
Robert Haas
Simon Riggs