Coverity complains that ECPGdebug is accessing debugstream without
holding debug_mutex, which is a fair complaint: we should take
debug_mutex while changing the settings ecpg_log looks at.
In some branches it also complains about unlocked use of simple_debug.
I think it's intentional and safe to have a quick unlocked check of
simple_debug at the start of ecpg_log, since that early exit will
always be taken in non-debug cases. But we should recheck
simple_debug after acquiring the mutex. In the worst case, calling
ECPGdebug concurrently with ecpg_log in another thread could result
in a null-pointer dereference due to debugstream transiently being
NULL while simple_debug isn't 0.
This is largely hypothetical, since it's unlikely anybody uses
ECPGdebug() at all in the field, and our own regression tests
don't seem to be hitting the theoretical race conditions either.
Still, if we're going to the trouble of having mutexes here, we ought
to be using them in a way that's actually safe not just almost safe.
Hence, back-patch to all supported branches.
We are capable of optimizing MIN() and MAX() aggregates on indexed
columns into subqueries that exploit the index, rather than the normal
thing of scanning the whole table. When we do this, we replace the
Aggref node(s) with Params referencing subquery outputs. Such Params
really ought to be included in the per-plan-node extParam/allParam
sets computed by SS_finalize_plan. However, we've never done so
up to now because of an ancient implementation choice to perform
that substitution during set_plan_references, which runs after
SS_finalize_plan, so that SS_finalize_plan never sees these Params.
The cleanest fix would be to perform a separate tree walk to do
these substitutions before SS_finalize_plan runs. That seems
unattractive, first because a whole-tree mutation pass is expensive,
and second because we lack infrastructure for visiting expression
subtrees in a Plan tree, so that we'd need a new function knowing
as much as SS_finalize_plan knows about that. I also considered
swapping the order of SS_finalize_plan and set_plan_references,
but that fell foul of various assumptions that seem tricky to fix.
So the approach adopted here is to teach SS_finalize_plan itself
to check for such Aggrefs. I refactored things a bit in setrefs.c
to avoid having three copies of the code that does that.
Back-patch of v17 commits d0d44049d and 779ac2c74. When d0d44049d
went in, there was no evidence that it was fixing a reachable bug,
so I refrained from back-patching. Now we have such evidence.
Per bug #18465 from Hal Takahara. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18465-2fae927718976b22@postgresql.org
Discussion: https://postgr.es/m/2391880.1689025003@sss.pgh.pa.us
Commit 695b4a113a added a dependency on retrieving oldestxid from
pg_control, which only exists in 9.0 and onwards, but the check for
8.4 as the oldest version was retained. Since there has been few if
any complaints of 8.4 upgrades not working, fix by setting 9.0 as
the oldest version supported rather than resurrecting 8.4 support.
Backpatch to all supported versions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1973418.1657040382@sss.pgh.pa.us
Backpatch-through: v12
Specifically, it terminates a background worker even if the caller
couldn't terminate the background worker with pg_terminate_backend().
Commit 3a9b18b309 neglected to update
this. Back-patch to v13, which introduced DROP DATABASE FORCE.
Reviewed by Amit Kapila. Reported by Kirill Reshke.
Discussion: https://postgr.es/m/20240429212756.60.nmisch@google.com
Most of the infrastructure for procedure arguments was already
okay with polymorphic output arguments, but it turns out that
CallStmtResultDesc() was a few bricks shy of a load here. It thought
all it needed to do was call build_function_result_tupdesc_t, but
that function specifically disclaims responsibility for resolving
polymorphic arguments. Failing to handle that doesn't seem to be
a problem for CALL in plpgsql, but CALL from plain SQL would get
errors like "cannot display a value of type anyelement", or even
crash outright.
In v14 and later we can simply examine the exposed types of the
CallStmt.outargs nodes to get the right type OIDs. But it's a lot
more complicated to fix in v12/v13, because those versions don't
have CallStmt.outargs, nor do they do expand_function_arguments
until ExecuteCallStmt runs. We have to duplicatively run
expand_function_arguments, and then re-determine which elements
of the args list are output arguments.
Per bug #18463 from Drew Kimball. Back-patch to all supported
versions, since it's busted in all of them.
Discussion: https://postgr.es/m/18463-f8cd77e12564d8a2@postgresql.org
Presently, when this function is called for an unlogged sequence on
a standby server, it will error out with a message like
ERROR: could not open file "base/5/16388": No such file or directory
Since the pg_sequences system view uses pg_sequence_last_value(),
it can error similarly. To fix, modify the function to return NULL
for unlogged sequences on standby servers. Since this bug is
present on all versions since v15, this approach is preferable to
making the ERROR nicer because we need to repair the pg_sequences
view without modifying its definition on released versions. For
consistency, this commit also modifies the function to return NULL
for other sessions' temporary sequences. The pg_sequences view
already appropriately filters out such sequences, so there's no bug
there, but we might as well offer some defense in case someone
invokes this function directly.
Unlogged sequences were first introduced in v15, but temporary
sequences are much older, so while the fix for unlogged sequences
is only back-patched to v15, the temporary sequence portion is
back-patched to all supported versions.
We could also remove the privilege check in the pg_sequences view
definition in v18 if we modify this function to return NULL for
sequences for which the current user lacks privileges, but that is
left as a future exercise for when v18 development begins.
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20240501005730.GA594666%40nathanxps13
Backpatch-through: 12
If we recursed to a new call of the same function, with a different
coldeflist (AS clause), it would fail because the inner call would
overwrite the outer call's idea of what to return. This is vaguely
like 1d2fe56e4 and c5bec5426, but it's not due to any API decisions:
it's just that we computed the actual output rowtype at the start of
the call, and saved it in the per-procedure data structure. We can
fix it at basically zero cost by doing the computation at the end
of each call instead of the start.
It's not clear that there's any real-world use-case for such a
function, but given that it doesn't cost anything to fix,
it'd be silly not to.
Per report from Andreas Karlsson. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/1651a46d-3c15-4028-a8c1-d74937b54e19@proxel.se
json_lex_string() relies on pg_encoding_mblen_bounded() to point to the
end of a JSON string when generating an error message, and the input it
uses is not guaranteed to be null-terminated.
It was possible to walk off the end of the input buffer by a few bytes
when the last bytes consist of an incomplete multi-byte sequence, as
token_terminator would point to a location defined by
pg_encoding_mblen_bounded() rather than the end of the input. This
commit switches token_terminator so as the error uses data up to the
end of the JSON input.
More work should be done so as this code could rely on an equivalent of
report_invalid_encoding() so as incorrect byte sequences can show in
error messages in a readable form. This requires work for at least two
cases in the JSON parsing API: an incomplete token and an invalid escape
sequence. A more complete solution may be too invasive for a backpatch,
so this is left as a future improvement, taking care of the overread
first.
A test is added on HEAD as test_json_parser makes this issue
straight-forward to check.
Note that pg_encoding_mblen_bounded() no longer has any callers. This
will be removed on HEAD with a separate commit, as this is proving to
encourage unsafe coding.
Author: Jacob Champion
Discussion: https://postgr.es/m/CAOYmi+ncM7pwLS3AnKCSmoqqtpjvA8wmCdoBtKA3ZrB2hZG6zA@mail.gmail.com
Backpatch-through: 13
If -l was specified together with selective-restore options such as -n
or -N, dependent TOC entries such as comments would be omitted from
the listing, even when an actual restore would have selected them.
This happened because PrintTOCSummary neglected to update the te->reqs
marking of the entry they depended on.
Per report from Justin Pryzby. This has been wrong since 0d4e6ed30
taught _tocEntryRequired to sometimes look at the "reqs" marking of
other TOC entries, so back-patch to all supported branches.
Discussion: https://postgr.es/m/ZjoeirG7yxODdC4P@pryzbyj2023
If a plpython-language trigger caused another one to be invoked,
the "TD" dictionary created for the inner one would overwrite the
outer one's "TD" dictionary. This is more or less the same problem
that 1d2fe56e4 fixed for ordinary functions in plpython, so fix it
the same way, by saving and restoring "TD" during a recursive
invocation.
This fix makes an ABI-incompatible change in struct PLySavedArgs.
I'm not too worried about that because it seems highly unlikely that
any extension is messing with those structs. We could imagine doing
something weird to preserve nominal ABI compatibility in the back
branches, like keeping the saved TD object in an extra element of
namedargs[]. However, that would only be very nominal compatibility:
if anything *is* touching PLySavedArgs, it would likely do the wrong
thing due to not knowing about the additional value. So I judge it
not worth the ugliness to do something different there.
(I also changed struct PLyProcedure, but its added field fits
into formerly-padding space, so that should be safe.)
Per bug #18456 from Jacques Combrink. This bug is very ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/3008982.1714853799@sss.pgh.pa.us
As an optimization, we store "name" columns as cstrings in btree
indexes.
Here we modify it so that Index Only Scans convert these cstrings back
to names with NAMEDATALEN bytes rather than storing the cstring in the
tuple slot, as was happening previously.
Bug: #17855
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin, Tom Lane
Discussion: https://postgr.es/m/17855-5f523e0f9769a566@postgresql.org
Backpatch-through: 12, all supported versions
We have long disallowed all forms of ALTER TABLE if the table is
already opened by some outer SQL command in the same session.
This has the same purpose as obtaining AccessExclusiveLock, but
since a session's own locks don't conflict the lock only blocks use
of the table by other sessions, not our own. Without this check,
the ALTER might confuse the outer SQL command since any previous
inspection of the table would potentially become invalid.
However, the RelisBecomingView code path in DefineQueryRewrite never
got that memo, and assumed that AccessExclusiveLock is sufficient
for performing something morally equivalent to a rather invasive
ALTER TABLE. Unsurprisingly, this can confuse an outer command
that is trying to do something with the table.
This was submitted as a security issue, but the security team
has been unable to identify any consequence worse than a null
pointer dereference (from trying to access rd_tableam methods
that the relation no longer has). Therefore, in accordance
with our usual policy, it's not security material and should
just be fixed as a routine bug.
Fix by disallowing the operation if the table is open locally,
exactly as ALTER TABLE does it.
Per an anonymous security researcher, via Bundesamt für Sicherheit
in der Informationstechnik.
Patch v12-v15 only. In v16 and later, we removed this code
altogether (cf. commit b23cd185f), so that there's no issue.
vac_update_datfrozenxid() did multiple loads of relfrozenxid and
relminmxid from buffer memory, and it assumed each would get the same
value. Not so if a concurrent vac_update_relstats() did an inplace
update. Commit 2d2e40e3be fixed the same
kind of bug in vac_truncate_clog(). Today's bug could cause the
rel-level field and XIDs in the rel's rows to precede the db-level
field. A cluster having such values should VACUUM affected tables.
Back-patch to v12 (all supported versions).
Discussion: https://postgr.es/m/20240423003956.e7.nmisch@google.com
In commit 25cd2d640 I (tgl) opined that "The additions of the months
and microseconds fields could also overflow, of course. However,
I believe we need no additional checks there; the existing range
checks should catch such cases". This is demonstrably wrong however
for the microseconds field, and given that discovery it seems prudent
to be paranoid about the months addition as well.
Report and patch by Joseph Koshakow. As before, back-patch to all
supported branches. (However, the test case doesn't work before
v15 because we didn't allow wider-than-int32 numbers in interval
literals. A variant test could probably be built that fits within
that restriction, but it didn't seem worth the trouble.)
Discussion: https://postgr.es/m/CAAvxfHf77sRHKoEzUw9_cMYSpbpNS2C+J_+8Dq4+0oi8iKopeA@mail.gmail.com
While back-patching commit 6f0cef935, I forgot that the MSVC
build scripts would also need adjustment in the back branches.
This is a blind attempt at a fix, but it's basically copying
nearby code so I think it will work.
Per buildfarm (via Andrew Dunstan)
Discussion: https://postgr.es/m/4cc4dc47-ca2b-4129-8784-db69b5f82777@dunslane.net
The code associated with EXEC SQL DEFINE was unreadable and full of
bugs, notably:
* It'd attempt to free a non-malloced string if the ecpg program
tries to redefine a macro that was defined on the command line.
* Possible memory stomp if user writes "-D=foo".
* Undef'ing or redefining a macro defined on the command line would
change the state visible to the next file, when multiple files are
specified on the command line. (While possibly that could have been
an intentional choice, the code clearly intends to revert to the
original macro state; it's just failing to consider this interaction.)
* Missing "break" in defining a new macro meant that redefinition
of an existing name would cause an extra entry to be added to the
definition list. While not immediately harmful, a subsequent undef
would result in the prior entry becoming visible again.
* The interactions with input buffering are subtle and were entirely
undocumented.
It's not that surprising that we hadn't noticed these bugs,
because there was no test coverage at all of either the -D
command line switch or multiple input files. This patch adds
such coverage (in a rather hacky way I guess).
In addition to the code bugs, the user documentation was confused
about whether the -D switch defines a C macro or an ecpg one, and
it failed to mention that you can write "-Dsymbol=value".
These problems are old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/998011.1713217712@sss.pgh.pa.us
get_baserel_parampathinfo previously assumed without checking that
the results of generate_join_implied_equalities "necessarily satisfy
join_clause_is_movable_into". This turns out to be wrong in the
presence of outer joins, because the generated clauses could include
Vars that mustn't be evaluated below a relevant outer join. That
led to applying clauses at the wrong plan level and possibly getting
incorrect query results. We must check each clause's nullable_relids,
and really the right thing to do is test join_clause_is_movable_into.
However, trying to fix it that way exposes an oversight in
equivclass.c: it wasn't careful about marking join clauses for
appendrel children with the correct clause_relids. That caused the
modified get_baserel_parampathinfo code to reject some clauses it
still needs to accept. (See parallel commit for HEAD/v16 for more
commentary about that.)
Per bug #18429 from Benoît Ryder. This misbehavior existed for
a long time before commit 2489d76c4, so patch v12-v15 this way.
Discussion: https://postgr.es/m/18429-8982d4a348cc86c6@postgresql.org
Commit 2ed8f9a01 intended to institute a policy that if a
RangeTblFunction has a coldeflist, then the function return type is
certainly RECORD, and we should use the coldeflist as the source of
truth about what the columns of the record type are. When the
original function has been folded to a constant, inspection of the
constant might give a different answer. This situation will lead to
a tuple-type-mismatch error at execution, but up until that point we
need to consistently believe the coldeflist, or we'll have problems
from different bits of code reaching different conclusions.
expandRTE didn't get that memo though, and would try to produce a
tupdesc based on the constant in this situation, leading to an
assertion failure. (Desultory testing suggests that non-assert
builds often manage to give the expected error, although I also
saw a "cache lookup failed for type 0" error, and it seems at
least possible that a crash could happen.)
Some other callers of get_expr_result_type and get_expr_result_tupdesc
were also being incautious about this. While none of them seem to
have actual bugs, they're working harder than necessary in this case,
besides which it seems safest to have an explicit policy of not using
those functions on an RTE with a coldeflist. Adjust the code
accordingly, and add commentary to funcapi.c about this policy.
Also fix an obsolete comment that claimed "get_expr_result_type()
doesn't know how to extract type info from a RECORD constant".
That hasn't been true since commit d57534740.
Per bug #18422 from Alexander Lakhin.
As with the previous commit, back-patch to all supported branches.
Discussion: https://postgr.es/m/18422-89ca86c8eac5246d@postgresql.org
This function would have the same issue we solved in commit 501cfd07d:
If an error is thrown after calling CreateWaitEventSet(), the file
descriptor (on epoll- or kqueue-based systems) or handles (on Windows)
that the WaitEventSet contains are leaked.
Like that commit, use PG_TRY-PG_FINALLY (PG_TRY-PG_CATCH in v12) to make
sure the WaitEventSet is freed properly.
Back-patch to all supported versions, but as we do not have this issue
in HEAD (cf. commit 50c67c201), no need to apply this patch to it.
Discussion: https://postgr.es/m/CAPmGK16MqdDoD8oatp8SQWaEa4vS3nfQqDN_Sj9YRuu5J3Lj9g%40mail.gmail.com
Up to now, read_sql_construct() has collected all the source text from
the statement or expression's initial token up to the character just
before the "until" token. It normally tries to strip trailing
whitespace from that, largely for neatness. If there was a "-- text"
comment after the expression, this resulted in removing the newline
that terminates the comment, which creates a hazard if we try to paste
the collected text into a larger SQL construct without inserting a
newline after it. In particular this caused our handling of CASE
constructs to fail if there's a comment after a WHEN expression.
Commit 4adead1d2 noticed a similar problem with cursor arguments,
and worked around it through the rather crude hack of suppressing
the whitespace-trimming behavior for those. Rather than do that
and leave the hazard open for future hackers to trip over, let's
fix it properly. pl_scanner.c already has enough infrastructure
to report the end location of the expression's last token, so
we can copy up to that location and never collect any trailing
whitespace or comment to begin with.
Erik Wienhold and Tom Lane, per report from Michal Bartak.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAAVzF_FjRoi8fOVuLCZhQJx6HATQ7MKm=aFOHWZODFnLmjX-xA@mail.gmail.com
Commit 72559438 started copying more attributes from AttributeTemplate
to the functions we generate on the fly. In the case of deform
functions, which return void, this meant that "noundef", from
AttributeTemplate's return value (a Datum) was copied to a void type.
Older LLVM releases were OK with that, but LLVM 18 crashes.
Update our llvm_copy_attributes() function to skip copying the attribute
for the return value, if the target function returns void.
Thanks to Dmitry Dolgov for help chasing this down.
Back-patch to all supported releases, like 72559438.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRACpVFr7LMdVYENUkScG5FCYMZDDdSGNU-tch%2Bw98OxYg%40mail.gmail.com
While SH_STAT() is only used for debugging, the allocated array can be large,
and therefore should be freed.
It's unclear why coverity started warning now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Coverity
Discussion: https://postgr.es/m/3005248.1712538233@sss.pgh.pa.us
Backpatch: 12-
If the OpenLDAP installation directory is not found, set $setup to 0
so that the LDAP tests are skipped. The macOS checks were already
doing that, but the checks on other OS's were not. While we're at it,
improve the error message when the tests are skipped, to specify
whether the OS is supported at all, or if we just didn't find the
installation directory.
This was accidentally "working" without this, i.e. we were skipping
the tests if the OpenLDAP installation was not found, because of a bug
in the LdapServer test module: the END block clobbered the exit code
so if the script die()s before running the first subtest, the whole
test script was marked as SKIPped. The next commit will fix that bug,
but we need to fix the setup code first.
These checks should probably go into configure/meson, but this is
better than nothing and allows fixing the bug in the END block.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/fb898a70-3a88-4629-88e9-f2375020061d@iki.fi
ecpg wants to emit a warning if it parses a SQL construct that the
backend can parse but will immediately throw a FEATURE_NOT_SUPPORTED
error for. The way it was testing for this was to see if the string
ERRCODE_FEATURE_NOT_SUPPORTED appeared anywhere in the gram.y code.
This is, of course, not nearly good enough, as there are plenty of
rules in gram.y that throw that error only conditionally. There was
a hack dating to 2008 to suppress the warning in one rule that
doesn't even exist anymore, but nothing for other cases we've created
since then. End result was that you could get "unsupported feature
will be passed to server" warnings while compiling perfectly good SQL
code in ecpg. Somehow we'd not heard complaints about this, but
it was exposed by the recent addition of an ecpg test for a SQL/JSON
construct.
To fix, suppress the warning if the rule contains any "if" statement.
Manual comparison of gram.y with the generated preproc.y file shows
that the warning is now emitted only in rules where it's sensible.
This problem has existed for a long time, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/603615.1712245382@sss.pgh.pa.us
If temp tables have dependencies (such as sequences) then it's
possible for autovacuum's cleanup of orphan temp tables to deadlock
against an incoming backend that's trying to clean out the temp
namespace for its own use. That can happen because RemoveTempRelations'
performDeletion call can visit objects within the namespace in
an order different from the order in which a per-table deletion
will visit them.
To fix, observe that performDeletion will begin by taking an exclusive
lock on the temp namespace (even though it won't actually delete it).
So, if we can get a shared lock on the namespace, we can be sure we're
not running concurrently with RemoveTempRelations, while also not
conflicting with ordinary use of the namespace. This requires
introducing a conditional version of LockDatabaseObject, but that's no
big deal. (It's surprising we've got along without that this long.)
Report and patch by Mikhail Zhilin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/c43ce028-2bc2-4865-9b89-3f706246eed5@postgrespro.ru
If we are building with openssl but USE_SSL_ENGINE didn't get set,
initialize_SSL's variable "pkey" is declared but used nowhere.
Apparently this combination hasn't been exercised in the buildfarm
before now, because I've not seen this warning before, even though
the code has been like this a long time. Move the declaration
to silence the warning (and remove its useless initialization).
Per buildfarm member sawshark. Back-patch to all supported branches.
The "pltargs" variable wasn't marked volatile, which makes it unsafe
to change its value within the PG_TRY block. It looks like the worst
outcome would be to fail to release a refcount on Py_None during an
(improbable) error exit, which would likely go unnoticed in the field.
Still, it's a bug. A one-liner fix could be to mark pltargs volatile,
but on the whole it seems cleaner to arrange things so that we don't
change its value within PG_TRY.
Per report from Xing Guo. This has been there for quite awhile,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/CACpMh+DLrk=fDv07MNpBT4J413fDAm+gmMXgi8cjPONE+jvzuw@mail.gmail.com
When a plain aggregate is used as a window function, and the window
frame start is specified as UNBOUNDED PRECEDING, the frame's head
cannot move so we do not need to use moving-aggregate mode. The check
for that was put into initialize_peragg(), failing to notice that
ExecInitWindowAgg() calls that function before it's filled in
winstate->frameOptions. Since makeNode() would have zeroed the field,
this didn't provoke uninitialized-value complaints, nor would the
erroneous decision have resulted in more than a little inefficiency.
Still, it's wrong, so move the initialization of
winstate->frameOptions earlier to make it work properly.
While here, also fix a thinko in a comment. Both errors crept in in
commit a9d9acbf2 which introduced the moving-aggregate mode.
Spotted by Vallimaharajan G. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18e7f2a5167.fe36253866818.977923893562469143@zohocorp.com
Ordinary ALTER TABLE SET SCHEMA will also move any owned sequences
into the new schema. We failed to do likewise for foreign tables,
because AlterTableNamespaceInternal believed that only certain
relkinds could have indexes, owned sequences, or constraints.
We could simply add foreign tables to that relkind list, but it
seems likely that the same oversight could be made again in
future. Instead let's remove the relkind filter altogether.
These functions shouldn't cost much when there are no objects
that they need to process, and surely this isn't an especially
performance-critical case anyway.
Per bug #18407 from Vidushi Gupta. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18407-4fd07373d252c6a0@postgresql.org
The musl dynamic linker saves a pointer to the process' environment
value of LD_LIBRARY_PATH very early in startup. When we move/clobber
the environment to make more room for ps status strings, we clobber
that value and thereby prevent libraries from being found via
LD_LIBRARY_PATH, which breaks the use of a temporary installation
for testing purposes. To fix, stop collecting usable space for
ps status if we notice that the variable we are about to clobber
is LD_LIBRARY_PATH. This will result in some reduction in how long
the ps status can be, but it's only likely to occur in temporary
test contexts, so it doesn't seem like a big problem. In any case,
we don't have to do it if we see we are on glibc, which surely is
where the majority of our Linux testing is done.
Thomas Munro, Bruce Momjian, and Tom Lane, per report from Wolfgang
Walther. Back-patch to all supported branches, with the hope that
we'll set up a buildfarm animal to test on this platform.
Discussion: https://postgr.es/m/fddd1cd6-dc16-40a2-9eb5-d7fef2101488@technowledgy.de
Some last minute polish of the patch managed to break the SQL
query for extracting the role comments due to fat-fingering.
Per the buildfarm Xversion tests.
Commit a3c7a993d fixed some cases involving target columns that are
arrays or composites by applying transformAssignedExpr to the VALUES
entries, and then stripping off any assignment ArrayRefs or
FieldStores that the transformation added. But I forgot about domains
over arrays or composites :-(. Such cases would either fail with
surprising complaints about mismatched datatypes, or insert unexpected
coercions that could lead to odd results. To fix, extend the
stripping logic to get rid of CoerceToDomain if it's atop an ArrayRef
or FieldStore.
While poking at this, I realized that there's a poorly documented and
not-at-all-tested behavior nearby: we coerce each VALUES column to
the domain type separately, and rely on the rewriter to merge those
operations so that the domain constraints are checked only once.
If that merging did not happen, it's entirely possible that we'd get
unexpected domain constraint failures due to checking a
partially-updated container value. There's no bug there, but while
we're here let's improve the commentary about it and add some test
cases that explicitly exercise that behavior.
Per bug #18393 from Pablo Kharo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18393-65fedb1a0de9260d@postgresql.org
There is a very ancient hack in check_sql_fn_retval that allows a
single SELECT targetlist entry of composite type to be taken as
supplying all the output columns of a function returning composite.
(This is grotty and fundamentally ambiguous, but it's really hard
to do nested composite-returning functions without it.)
As far as I know, that doesn't cause any problems in ordinary
functions. It's disastrous for procedures however. All procedures
that have any output parameters are labeled with prorettype RECORD,
and the CALL code expects it will get back a record with one column
per output parameter, regardless of whether any of those parameters
is composite. Doing something else leads to an assertion failure
or core dump.
This is simple enough to fix: we just need to not apply that rule
when considering procedures. However, that requires adding another
argument to check_sql_fn_retval, which at least in principle might be
getting called by external callers. Therefore, in the back branches
convert check_sql_fn_retval into an ABI-preserving wrapper around a
new function check_sql_fn_retval_ext.
Per report from Yahor Yuzefovich. This has been broken since we
implemented procedures, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CABz5gWHSjj2df6uG0NRiDhZ_Uz=Y8t0FJP-_SVSsRsnrQT76Gg@mail.gmail.com
Commit 387da18874 moved the code to put socket into non-blocking mode
from socket_set_nonblocking() into the one-time initialization
function, pq_init(). In socket_set_nonblocking(), there indeed was a
risk of recursion on failure like the comment said, but in pq_init(),
ERROR or FATAL is fine. There's even another elog(FATAL) just after
this, if setting FD_CLOEXEC fails.
Note that COMMERROR merely logged the error, it did not close the
connection, so if putting the socket to non-blocking mode failed we
would use the connection anyway. You might not immediately notice,
because most socket operations in a regular backend wait for the
socket to become readable/writable anyway. But e.g. replication will
be quite broken.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/d40a5cd0-2722-40c5-8755-12e9e811fa3c@iki.fi
In OpenSSL 3.0.0 and later, ERR_reason_error_string randomly refuses
to provide a string for error codes representing system errno values
(e.g., "No such file or directory"). There is a poorly-documented way
to extract the errno from the SSL error code in this case, so do that
and apply strerror, rather than falling back to reporting the error
code's numeric value as we were previously doing.
Problem reported by David Zhang, although this is not his proposed
patch; it's instead based on a suggestion from Heikki Linnakangas.
Back-patch to all supported branches, since any of them are likely
to be used with recent OpenSSL.
Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
This reverts commit eae7be600b, following a discussion with Tom Lane,
due to concerns that this impacts the decisions made by the planner for
the number of workers spawned based on the inlining and const-folding of
index expressions and predicate for cases that would have worked until
this commit.
Discussion: https://postgr.es/m/162802.1709746091@sss.pgh.pa.us
Backpatch-through: 12
In the corner case where a function returning RECORD has been
simplified to a RECORD constant or an inlined ROW() expression,
ExecInitFunctionScan failed to cross-check the function's result
rowtype against the coldeflist provided by the calling query.
That happened because get_expr_result_type is able to extract a
tupdesc from such expressions, which led ExecInitFunctionScan to
ignore the coldeflist. (Instead, it used the extracted tupdesc
to check the function's output, which of course always succeeds.)
I have not been able to demonstrate any really serious consequences
from this, because if some column of the result is of the wrong
type and is directly referenced by a Var of the calling query,
CheckVarSlotCompatibility will catch it. However, we definitely do
fail to report the case where the function returns more columns than
the coldeflist expects, and in the converse case where it returns
fewer columns, we get an assert failure (but, seemingly, no worse
results in non-assert builds).
To fix, always build the expected tupdesc from the coldeflist if there
is one, and consult get_expr_result_type only when there isn't one.
Also remove the failing Assert, even though it is no longer reached
after this fix. It doesn't seem to be adding anything useful, since
later checking will deal with cases with the wrong number of columns.
The only other place I could find that is doing something similar
is inline_set_returning_function. There's no live bug there because
we cannot be looking at a Const or RowExpr, but for consistency
change that code to agree with ExecInitFunctionScan.
Per report from PetSerAl. After some debate I've concluded that
this should be back-patched. There is a small risk that somebody
has been relying on such a case not throwing an error, but I judge
this outweighed by the risk that I've missed some way in which the
failure to cross-check has worse consequences than sketched above.
Discussion: https://postgr.es/m/CAKygsHSerA1eXsJHR9wft3Gn3wfHQ5RfP8XHBzF70_qcrrRvEg@mail.gmail.com
As coded, the planner logic that calculates the number of parallel
workers to use for a parallel index build uses expressions and
predicates from the relcache, which are flattened for the planner by
eval_const_expressions().
As reported in the bug, an immutable parallel-unsafe function flattened
in the relcache would become a Const, which would be considered as
parallel-safe, even if the predicate or the expressions including the
function are not safe in parallel workers. Depending on the expressions
or predicate used, this could cause the parallel build to fail.
Tests are included that check parallel index builds with parallel-unsafe
predicate and expressions. Two routines are added to lsyscache.h to be
able to retrieve expressions and predicate of an index from its pg_index
data.
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAHewXN=UaAaNn9ruHDH3Os8kxLVmtWqbssnf=dZN_s9=evHUFA@mail.gmail.com
Backpatch-through: 12
The error message(s) were reporting the stats kind of 'f', which is not
correct as that's for the "dependencies" statistics kind.
Reported-by: Horst Reiterer
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/18375-ba99383eb9062d6a@postgresql.org
Backpatch-through: 12, where MCV extended stats were added.
dsa_dump would print a large negative number instead of zero for
segment bin 0. Fix by explicitly checking for underflow and add
special case for bin 0. Backpatch to all supported versions.
Author: Ian Ilyasov <ianilyasov@outlook.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/GV1P251MB1004E0D09D117D3CECF9256ECD502@GV1P251MB1004.EURP251.PROD.OUTLOOK.COM
Backpatch-through: v12
Tom Lane
Daniel Gustafsson
Noah Misch
Nathan Bossart
Michael Paquier
Peter Eisentraut
David Rowley
Etsuro Fujita
Thomas Munro
Andres Freund
Heikki Linnakangas
Alexander Korotkov
Jeff Davis
Alvaro Herrera