GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
Some environments may compile with --with-lz4 while the command "lz4"
goes missing, causing two failures in the TAP tests of pg_verifybackup
(008_untar.pl and 010_client_untar.pl) as the code assumed that the
command always existed with a hardcoded value in src/Makefile.global.
Rather than this method, this adds a ./configure check based on
PGAC_PATH_PROGS() to find automatically the command and get an absolute
path to it.
Both tests need to be adjusted for the case where the command does not
exist, actually, as Makefile.global would set now LZ4 to an empty value
in this case. The TAP tests of pg_receivewal already do that.
Per report from buildfarm member copperhead, as an effect of dab2984.
The origin of the failure is actually babbbb5 that did not centralize
the check for the existence of a "lz4" command at ./configure to shave a
few cycles. Note that one just needs to tweak an environment to move
"lz4" out of the way to reproduce the problem, which is what I did to
test this change.
Per discussion with Robert Haas, Tom Lane, Andres Freund and myself.
Discussion: https://postgr.es/m/Ygc51WVAFGocSu4h@paquier.xyz
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
Commit 16f96c74d neglected to consider the possibility of cross-compiling,
causing cross-compiles to fail at the configure stage unless you'd
selected --with-openssl. Since we're now more or less assuming that
/dev/urandom is available everywhere, it seems reasonable to assume
that the cross-compile target has it too, rather than failing.
Per complaint from Vincas Dargis. Back-patch to v14 where this came in.
Discussion: https://postgr.es/m/0dc14a31-acaf-8cae-0df4-a87339b22bd9@gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Normally "prove" and "perl" come from the same Perl installation,
but we support the case where they don't (mainly because the MSys
buildfarm animals need this). In that case, AX_PROG_PERL_MODULES
is completely the wrong thing to use, because it's checking what
"perl" has. Instead, make a little TAP test script including the
required modules, and run that under "prove".
We don't need ax_prog_perl_modules.m4 at all after this change,
so remove it.
Back-patch to all supported branches, for the buildfarm's benefit.
(In v10, this also back-patches the effects of commit 264eb03aa.)
Andrew Dunstan and Tom Lane, per an observation by Noah Misch
Discussion: https://postgr.es/m/E1moZHS-0002Cu-Ei@gemulon.postgresql.org
We use "clang" to compile bitcode files for LLVM inlining. That might
be different from the build's main C compiler, so it needs its own set
of compiler flags. To simplify configure, we don't bother adding any
-W switches to that flag set; there's little need since the main build
will show us any warnings. However, if we don't want to see unwanted
warnings, we still have to add any -Wno-warning switches we'd normally
use with clang.
This escaped notice before commit 9ff47ea41, which tried to add
-Wno-compound-token-split-by-macro; buildfarm animals using mismatched
CC and CLANG still showed those warnings. I'm not sure why we never
saw any effects from the lack of -Wno-unused-command-line-argument
(maybe that's only activated by -Wall?). clang does not currently
support -Wno-format-truncation or -Wno-stringop-truncation, although
in the interests of future-proofing and consistency I included tests
for those.
Back-patch to v11 where we started building bitcode files.
Discussion: https://postgr.es/m/2921539.1637254619@sss.pgh.pa.us
clang-12 has introduced -Wcompound-token-split-by-macro, that is causing
a large amount of warnings when building PL/Perl because of its
interactions with upstream Perl. This commit adds one -Wno to CFLAGS at
./configure time if the flag is supported by the compiler to silence all
those warnings.
Upstream perl has fixed this issue, but it is going to take some time
before this is spread across the buildfarm, and we have noticed that
some animals would be useful with an extra -Werror to help with the
detection of incorrect placeholders (see b0cf544), dangomushi being
one.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/YYr3qYa/R3Gw+Sbg@paquier.xyz
Backpatch-through: 10
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Per the discussion around 3eb1f4d09, let's have configure verify that
the available IPC::Run version is at least 0.79, the agreed-on minimum.
It seems unlikely that this could bite anybody anymore, but it's useful
as documentation. (Based on that, there's little need to back-patch.)
For consistency, also supply a minimum version for the other Perl
module we have an explicit check for, Time::HiRes. I used the
version that ships with Perl 5.8.3.
Discussion: https://postgr.es/m/E1mYY6Z-0006OL-QN@gemulon.postgresql.org
This testing was useful when it was written, nigh twenty years ago,
but it seems fairly pointless for any platform built in the last
dozen or more years. (Compare also the comments at 8a2121185.)
Also we now have reports that the test program itself fails under
ThreadSanitizer. Rather than invest effort in fixing it, let's
just drop it, and assume that the few people who still care
already know they need to use --disable-thread-safety.
Back-patch into v14, for consistency with 8a2121185.
Discussion: https://postgr.es/m/CADhDkKzPSiNvA3Hyq+wSR_icuPmazG0cFe=YnC3U-CFcYLc8Xw@mail.gmail.com
Build farm animals running ancient HPUX and Solaris have a non-standard
sigwait() from draft versions of POSIX, so they didn't like commit
7c09d279. To avoid the problem in general, only try to use sigwait() if
it's declared by <signal.h> and matches the expected declaration. To
select the modern declaration on Solaris (even in non-threaded
programs), move -D_POSIX_PTHREAD_SEMANTICS into the right place to
affect all translation units.
Also fix the error checking. Modern sigwait() doesn't set errno.
Thanks to Tom Lane for help with this.
Discussion: https://postgr.es/m/3187588.1626136248%40sss.pgh.pa.us
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
Sigh ... I was expecting AC_CHECK_LIB to do something it didn't,
namely update LIBS. This led to not finding ldap_initialize.
Fix by moving the probe for ldap_initialize. In some sense this
is more correct anyway, since (at least for now) we care about
whether ldap_initialize exists in libldap not libldap_r.
Per buildfarm member elver and local testing.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
I incorrectly diagnosed the reason why hoverfly is unhappy.
Looking closer, it appears that it fails to link libldap
unless libssl is also present; so the problem was my
idea of clearing LIBS before making the check. Revert
to essentially the original coding, except that instead
of failing when libldap_r isn't there, use libldap.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
In commit d0a02bdb8, I'd supposed that uniformly probing for
ldap_bind would make the intent clearer. However, that seems
not to work on AIX, for obscure reasons (maybe it's a macro
there?). Revert to the former behavior of probing
ldap_simple_bind for thread-safe cases and ldap_bind otherwise.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Similarly to the cryptohash implementations, this refactors the existing
HMAC code into a single set of APIs that can be plugged with any crypto
libraries PostgreSQL is built with (only OpenSSL currently). If there
is no such libraries, a fallback implementation is available. Those new
APIs are designed similarly to the existing cryptohash layer, so there
is no real new design here, with the same logic around buffer bound
checks and memory handling.
HMAC has a dependency on cryptohashes, so all the cryptohash types
supported by cryptohash{_openssl}.c can be used with HMAC. This
refactoring is an advantage mainly for SCRAM, that included its own
implementation of HMAC with SHA256 without relying on the existing
crypto libraries even if PostgreSQL was built with their support.
This code has been tested on Windows and Linux, with and without
OpenSSL, across all the versions supported on HEAD from 1.1.1 down to
1.0.1. I have also checked that the implementations are working fine
using some sample results, a custom extension of my own, and doing
cross-checks across different major versions with SCRAM with the client
and the backend.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/X9m0nkEJEzIPXjeZ@paquier.xyz
This seems to have been just copied-and-pasted from some other
header checks. But our C code is entirely unprepared to support
such a header name, so it's only wasting cycles to look for it.
If we did need to support it, some #ifdefs would be required.
(A quick trawl at codesearch.debian.net finds some packages that
reference lz4/lz4.h; but they use *only* that spelling, and
appear to be intending to reference their own copy rather than
a system-level installation of liblz4. There's no evidence of
freestanding installations that require this spelling.)
Discussion: https://postgr.es/m/457962.1616362509@sss.pgh.pa.us
It's not okay to just shove the pkg_config results right into our
build flags, for a couple different reasons:
* This fails to maintain the separation between CPPFLAGS and CFLAGS,
as well as that between LDFLAGS and LIBS. (The CPPFLAGS angle is,
I believe, the reason for warning messages reported when building
with MacPorts' liblz4.)
* If pkg_config emits anything other than -I/-D/-L/-l switches,
it's highly unlikely that we want to absorb those. That'd be more
likely to break the build than do anything helpful. (Even the -D
case is questionable; but we're doing that for libxml2, so I kept it.)
Also, it's not okay to skip doing an AC_CHECK_LIB probe, as
evidenced by recent build failure on topminnow; that should
have been caught at configure time.
Model fixes for this on configure's libxml2 support.
It appears that somebody overlooked an autoheader run, too.
Discussion: https://postgr.es/m/20210119190720.GL8560@telsasoft.com
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Don't try to compile src/port/pthread_barrier_wait.c if we opted out of
threads at configure time. Revealed by build farm member gaur, which
can't compile this code because of problems with its pthread
implementation. It shouldn't be trying to, because it's using
--disable-thread-safety.
Defect in commit 44bf3d50.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2568537.1615603606%40sss.pgh.pa.us
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
macOS's ranlib issued a warning about an empty pread.o file with the
previous arrangement, on systems new enough to require no replacement
functions. Let's go back to using configure's AC_REPLACE_FUNCS system
to build and include each .o in the library only if it's needed, which
requires moving the *v() functions to their own files.
Also move the _with_retry() wrapper to a more permanent home.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1283127.1610554395%40sss.pgh.pa.us
Provide synchronous vectored file I/O routines. These map to preadv()
and pwritev(), with fallback implementations for systems that don't have
them. Also provide a wrapper pg_pwritev_with_retry() that automatically
retries on short writes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
This module had a dependency on pgcrypto's md5.c that got removed by
b67b57a. Instead of the code from pgcrypto, this code can just use the
new cryptohash routines for MD5 as a drop-in replacement, so let's just
do this switch. This has also the merit to simplify a bit the
compilation of uuid-ossp.
This requires --with-uuid to be reproduced, and I have used e2fs as a
way to reproduce the failure, then test this commit.
Per reports from buildfarm members longfin, florican and sifaka.
Discussion: https://postgr.es/m/X9GToVd3QmWeNvj8@paquier.xyz
Checking for DocBook being installed was valuable when we were on the
OpenSP docs toolchain, because that was rather hard to get installed
fully. Nowadays, as long as you have xmllint and xsltproc installed,
you're good, because those programs will fetch the DocBook files off
the net at need. Moreover, testing this at configure time means that
a network access may well occur whether or not you have any interest
in building the docs later. That can be slow (typically 2 or 3
seconds, though much higher delays have been reported), and it seems
not very nice to be doing an off-machine access without warning, too.
Hence, drop the PGAC_CHECK_DOCBOOK probe, and adjust related
documentation. Without that macro, there's not much left of
config/docbook.m4 at all, so I just removed it.
Back-patch to v11, where we started to use xmllint in the
PGAC_CHECK_DOCBOOK probe.
Discussion: https://postgr.es/m/E2EE6B76-2D96-408A-B961-CAE47D1A86F0@yesql.se
Discussion: https://postgr.es/m/A55A7FC9-FA60-47FE-98B5-139CDC57CE6E@gmail.com
Remove the ability to select random number generator independently from
SSL library. Instead, use the random number generator from the SSL
library (today only OpenSSL supported) if one is configured. If no SSL
library is configured, use the platform default (which means use
CryptoAPI on Win32 and /dev/urandom on Linux).
This also restructures pg_strong_random.c to have three clearly separate
sections, one for each implementation, with two functions in each,
instead of a scattered set of ifdefs throughout the whole file.
Author: Daniel Gustafsson, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/632623.1605460616@sss.pgh.pa.us
We previously put the -isysroot switch only into CPPFLAGS, theorizing
that it was only needed to find the right copies of include files.
However, it seems that we also need to use it while linking programs,
to find the right stub ".tbd" files for libraries. We got away
without that up to now, but apparently that was mostly luck. It may
also be that failures are only observed when the Xcode version is
noticeably out of sync with the host macOS version; the case that's
prompting action right now is that builds fail when using latest Xcode
(12.2) on macOS Catalina, even though it's fine on Big Sur.
Hence, add -isysroot to LDFLAGS as well. (It seems that the more
common practice is to put it in CFLAGS, whence it'd be included at
both compile and link steps. However, we can't mess with CFLAGS in
the platform template file without confusing configure's logic for
choosing default CFLAGS.)
This should be back-patched, but first let's see if the buildfarm
likes it on HEAD.
Report and patch by James Hilliard (some cosmetic mods by me)
Discussion: https://postgr.es/m/20201120003314.20560-1-james.hilliard1@gmail.com
Theoretically one could go into src/test/thread and build/run this
program there. In practice, that hasn't worked since 96bf88d52,
and probably much longer on some platforms (likely including just
the sort of hoary leftovers where this test might be of interest).
While it wouldn't be too hard to repair the breakage, the fact that
nobody has noticed for two years shows that there is zero usefulness
in maintaining this build pathway. Let's get rid of it and decree
that thread_test.c is *only* meant to be built/used in configure.
Given that decision, it makes sense to put thread_test.c under config/
and get rid of src/test/thread altogether, so that's what I did.
In passing, update src/test/README, which had been ignored by some
not-so-recent additions of subdirectories.
Discussion: https://postgr.es/m/227659.1603041612@sss.pgh.pa.us
Hack things so that our idea of "struct stat" is equivalent to Windows'
struct __stat64, allowing it to have a wide enough st_size field.
Instead of relying on native stat(), use GetFileInformationByHandle().
This avoids a number of issues with Microsoft's multiple and rather
slipshod emulations of stat(). We still need to jump through hoops
to deal with ERROR_DELETE_PENDING, though :-(
Pull the relevant support code out of dirmod.c and put it into
its own file, win32stat.c.
Still TODO: do we need to do something different with lstat(),
rather than treating it identically to stat()?
Juan José Santamaría Flecha, reviewed by Emil Iggland;
based on prior work by Michael Paquier, Sergey Zubkovsky, and others
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905CF5099@g01jpexmbkw24
Discussion: https://postgr.es/m/15858-9572469fd3b73263@postgresql.org
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Tom Lane
Michael Paquier
Thomas Munro
Bruce Momjian
Andrew Dunstan
Peter Eisentraut
Joe Conway
Robert Haas
Magnus Hagander