This allows tools that read the WAL sequentially to identify (possible)
redo points when they're reached, rather than only being able to
detect them in retrospect when XLOG_CHECKPOINT_ONLINE is found, possibly
much later in the WAL stream. There are other possible applications as
well; see the discussion links below.
Any redo location that precedes the checkpoint location should now point
to an XLOG_CHECKPOINT_REDO record, so add a cross-check to verify this.
While adjusting the code in CreateCheckPoint() for this patch, I made it
call WALInsertLockAcquireExclusive a bit later than before, since there
appears to be no need for it to be held while checking whether the system
is idle, whether this is an end-of-recovery checkpoint, or what the current
timeline is.
Bump XLOG_PAGE_MAGIC.
Patch by me, based in part on earlier work from Dilip Kumar. Review by
Dilip Kumar, Amit Kapila, Andres Freund, and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
Discussion: http://postgr.es/m/20230614194717.jyuw3okxup4cvtbt%40awork3.anarazel.de
Discussion: http://postgr.es/m/CA+hUKG+b2ego8=YNW2Ohe9QmSiReh1-ogrv8V_WZpJTqP3O+2w@mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
Allow users to opt out of returning FPI data and block data from
pg_get_wal_block_info as an optimization. Testing has shown that this
can make function execution over twice as fast in some cases.
When pg_get_wal_block_info is called with "show_data := false", it
always returns NULL values for its block_data and block_fpi_data bytea
output parameters. Nothing else changes. In particular, the function
will still return the usual per-block summary of block data/FPI space
overhead. Use of "show_data := false" is therefore feasible with all
queries that don't specifically require these raw binary strings.
Follow-up to recent work in commit 122376f0. There still hasn't been a
stable release with the pg_get_wal_block_info function, so no bump in
the pg_walinspect extension version.
Per suggestion from Melanie Plageman.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAAKRu_bJvbcYBRj2cN6G2xV7B7-Ja+pjTO1nEnEhRR8OXYiABA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzm9shOkEDM10_+qOZkRSQhKVxwBFiehH6EHWQQRd_rDPw@mail.gmail.com
Expand the output parameters in pg_walinspect's pg_get_wal_block_info
function to return additional information that was previously only
available from pg_walinspect's pg_get_wal_records_info function. Some
of the details are attributed to individual block references, rather
than aggregated into whole-record values, since the function returns one
row per block reference per WAL record (unlike pg_get_wal_records_info,
which always returns one row per WAL record).
This structure is much easier to work with when writing queries that
track how individual blocks changed over time, or when attributing costs
to individual blocks (not WAL records) is useful.
This is the second time that pg_get_wal_block_info has been enhanced in
recent weeks. Commit 9ecb134a expanded on the original version of the
function added in commit c31cf1c0 (where it first appeared under the
name pg_get_wal_fpi_info). There still hasn't been a stable release
since commit c31cf1c0, so no bump in the pg_walinspect extension
version.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Kyotaro HORIGUCHI <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVRK5=Z+2ZVsjgTTSkfEnQzCuwny7iigpG7g1btk4Ws2A@mail.gmail.com
Commit 0276ae42dd taught pg_walinspect's pg_get_wal_record_info()
function to output NULLs rather than empty strings for its record
description and block_ref output parameters. However, it inadvertently
moved the function call that sets fpi_length until after it was already
set. As a result, pg_get_wal_record_info() always output spurious
fpi_length values of 0.
Fix by switching the order back (but keep the behavioral change).
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkJmgSYkt6-smQ+57SxSmov+EKqFZdSimFewosoL_JKoA@mail.gmail.com
This improves a few things in pg_walinspect:
- Return NULL rather than empty strings in pg_get_wal_records_info() for
the block references and the record description if there is no
information provided by the fallback. This point has been raised by
Peter Geoghegan.
- Add a check on XLogRecHasAnyBlockRefs() for pg_get_wal_block_info(),
to directly skip records that have no block references. This speeds up
the function a bit, depending on the number of records that have no
block references.
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWL9RG8sGJHinggRNBTxgRWJTSxCkB+cE6=t3Phh=Ey+A@mail.gmail.com
This commit improves the tests of pg_walinspect on a few things:
- Remove aggregates for queries that should fail. If the code is
reworked in such a way that the behavior of these queries is changed,
we would get more input from them, written this way.
- Expect at least one record reported in the valid queries doing scans
across ranges, rather than zero records.
- Adjust a few comments, for consistency.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACVaoXW3nJD9zq8E66BEf-phgJfFcKRVJq9GXkuX0b3ULQ@mail.gmail.com
\dx was used on pg_walinspect to list its objects in 1.0 but the names
of the objects in this version do not have an order that is always
guaranteed depending on the collation used. Rather than append a
COLLATE clause in the query of \dx, this tweaks the regression test to
produce an output whose order is guaranteed.
Reported-by: Andres Freund
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/20230314215440.gma7g4keswdnldj5@awork3.anarazel.de
This commit reworks a bit the set-returning functions of pg_walinspect,
making them more flexible regarding their end LSN:
- pg_get_wal_records_info()
- pg_get_wal_stats()
- pg_get_wal_block_info()
The end LSNs given to these functions is now handled so as a value
higher than the current LSN of the cluster (insert LSN for a primary, or
replay LSN for a standby) does not raise an error, giving more
flexibility to monitoring queries. Instead, the functions return
results up to the current LSN, as found at the beginning of each
function call.
As an effect of that, pg_get_wal_records_info_till_end_of_wal() and
pg_get_wal_stats_till_end_of_wal() are now removed from 1.1, as the
existing, equivalent functions are able to offer the same
possibilities.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACU0_q-o4DSweyaW9NO1KBx-QkN6G_OzYQvpjf3CZVASkg@mail.gmail.com
The regression tests of pg_walinspect are reworked on a few aspects:
- Reorganization on the validation checks done for the start and end
LSNs on the six SQL functions currently available in 1.1.
- Addition of a few patterns doing bound checks for invalid start LSN,
invalid end LSN, and failures in reading LSN positions, for anything
that's been missing.
- Use of a consistent style across the whole, limiting blank lines
across the queries.
- Addition of a new test script for upgrades. For the time being, this
is straight-forward with a check that the upgrade from 1.0 works
correctly. This will be made more complicated once the interface of
this extension is reworked in 1.1 with a follow-up patch.
Most of the contents of this commit are extracted from a larger patch by
the same author, largely reorganized by me to minimize the differences
with the upcoming work aimed to lift the bound checks on the input LSNs
used by the functions of this extension.
Author: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACU0_q-o4DSweyaW9NO1KBx-QkN6G_OzYQvpjf3CZVASkg@mail.gmail.com
This commit reworks pg_get_wal_fpi_info() to become aware of all the
block information that can be attached to a record rather than just its
full-page writes:
- Addition of the block id as assigned by XLogRegisterBuffer(),
XLogRegisterBlock() or XLogRegisterBufData().
- Addition of the block data, as bytea, or NULL if none. The length of
the block data can be guessed with length(), so there is no need to
store its length in a separate field.
- Addition of the full-page image length, as counted without a hole or
even compressed.
- Modification of the handling of the full-page image data. This is
still a bytea, but it could become NULL if none is assigned to a block.
- Addition of the full-page image flags, tracking if a page is stored
with a hole, if it needs to be applied and the type of compression
applied to it, as of all the BKPIMAGE_* values in xlogrecord.h.
The information of each block is returned as one single record, with the
record's ReadRecPtr included to be able to join the block information
with the existing pg_get_wal_records_info(). Note that it is perfectly
possible for a block to hold both data and full-page image.
Thanks also to Kyotaro Horiguchi and Matthias van de Meent for the
discussion.
This commit uses some of the work proposed by Melanie, though it has
been largely redesigned and rewritten by me. Bharath has helped in
refining a bit the whole.
Reported-by: Melanie Plageman
Author: Michael Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAKRu_bORebdZmcV8V4cZBzU8M_C6tDDdbiPhCZ6i-iuSXW9TA@mail.gmail.com
GetWALRecordsInfo() and pg_get_wal_fpi_info() can leak memory across
WAL record iterations. Fix this by using a temporary memory context
that's reset for each WAL record iteraion.
Also a use temporary context for loops in GetXLogSummaryStats(). The
number of iterations is a small constant, so the previous behavior was
not a leak, but fix for clarity (but no need to backport).
Backport GetWALRecordsInfo() change to version
15. pg_get_wal_fpi_info() didn't exist in version 15.
Reported-by: Peter Geoghegan
Author: Bharath Rupireddy
Discussion: https://www.postgresql.org/message-id/CAH2-WznLEJjn7ghmKOABOEZYuJvkTk%3DGKU3m0%2B-XBAH%2BerPiJQ%40mail.gmail.com
Backpatch-through: 15
This function is able to extract the full page images from a range of
records, specified as of input arguments start_lsn and end_lsn. Like
the other functions of this module, an error is returned if using LSNs
that do not reflect real system values. All the FPIs stored in a single
record are extracted.
The module's version is bumped to 1.1.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CALj2ACVCcvzd7WiWvD=6_7NBvVB_r6G0EGSxL4F8vosAi6Se4g@mail.gmail.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
pg_walinspect uses datatype double (double precision floating point
number) for WAL stats percentile calculations and expose them via
float4 (single precision floating point number), which an unnecessary
loss of precision and confusing. Even though, it's harmless that way,
let's use float8 (double precision floating-point number) to be in
sync with what pg_walinspect does internally and what it exposes to
the users. This seems to be the pattern used elsewhere in the code.
Reported-by: Peter Eisentraut
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
Usage of ReadNextXLogRecord()'s first_record parameter for error
reporting isn't always correct. For instance, in GetWALRecordsInfo()
and GetWalStats(), we're reading multiple records, and first_record
is always passed as the LSN of the first record which is then used
for error reporting for later WAL record read failures. This isn't
correct.
The correct parameter to use for error reports in case of WAL
reading failures is xlogreader->EndRecPtr. This change fixes it.
While on it, removed an unnecessary Assert in pg_walinspect code.
Reported-by: Robert Haas
Author: Bharath Rupireddy
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/CA%2BTgmoZAOGzPUifrcZRjFZ2vbtcw3mp-mN6UgEoEcQg6bY3OVg%40mail.gmail.com
Backpatch-through: 15
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
Instability in the test for pg_walinspect revealed that
pg_get_wal_records_info_till_end_of_wal(x) would try to decode all the
records with a start LSN earlier than the flush LSN, even though that
might include a partial record at the end of the range. In that case,
read_local_xlog_page_no_wait() would return NULL when it tried to read
past the flush LSN, which would be interpreted as an error by the
caller. That caused a test failure only on a BF animal that had been
restarted recently, but could be expected to happen in the wild quite
easily depending on the alignment of various parameters.
Fix by using private data in read_local_xlog_page_no_wait() to signal
end-of-wal to the caller, so that it can be properly distinguished
from a real error.
Discussion: https://postgr.es/m/Ymd/e5eeZMNAkrXo%40paquier.xyz
Discussion: https://postgr.es/m/111657.1650910309@sss.pgh.pa.us
Authors: Thomas Munro, Bharath Rupireddy.
Bruce Momjian
Robert Haas
Tom Lane
David Rowley
Peter Geoghegan
Michael Paquier
Jeff Davis
Andrew Dunstan
Andres Freund
Peter Eisentraut