A compressed stream may end with an empty packet. In this case
decompression finishes before reading the empty packet and the
remaining stream packet causes a failure in reading the following
data. This commit makes sure to consume such extra data, avoiding a
failure when decompression the data. This corner case was reproducible
easily with a data length of 16kB, and existed since e94dd6a. A cheap
regression test is added to cover this case based on a random,
incompressible string.
The first attempt of this patch has allowed to find an older failure
within the compression logic of pgcrypto, fixed by b9b6105. This
involved SLES 15 with z390 where a custom flavor of libz gets used.
Bonus thanks to Mark Wong for providing access to the specific
environment.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
contrib/pgcrypto mishandled the case where deflate() does not consume
all of the offered input on the first try. It reset the next_in pointer
to the start of the input instead of leaving it alone, causing the wrong
data to be fed to the next deflate() call.
This has been broken since pgcrypto was committed. The reason for the
lack of complaints seems to be that it's fairly hard to get stock zlib
to not consume all the input, so long as the output buffer is big enough
(which it normally would be in pgcrypto's usage; AFAICT the input is
always going to be packetized into packets no larger than ZIP_OUT_BUF).
However, IBM's zlibNX implementation for AIX evidently will do it
in some cases.
I did not add a test case for this, because I couldn't find one that
would fail with stock zlib. When we put back the test case for
bug #16476, that will cover the zlibNX situation well enough.
While here, write deflate()'s second argument as Z_NO_FLUSH per its
API spec, instead of hard-wiring the value zero.
Per buildfarm results and subsequent investigation.
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
This reverts commit 9e10898, after finding out that buildfarm members
running SLES 15 on z390 complain on the compression and decompression
logic of the new test: pipistrelles, barbthroat and steamerduck.
Those hosts are visibly using hardware-specific changes to improve zlib
performance, requiring more investigation.
Thanks to Tom Lane for the discussion.
Discussion: https://postgr.es/m/20200722093749.GA2564@paquier.xyz
Backpatch-through: 9.5
A compressed stream may end with an empty packet, and PGP decompression
finished before reading this empty packet in the remaining stream. This
caused a failure in pgcrypto, handling this case as corrupted data.
This commit makes sure to consume such extra data, avoiding a failure
when decompression the entire stream. This corner case was reproducible
with a data length of 16kB, and existed since its introduction in
e94dd6a. A cheap regression test is added to cover this case.
Thanks to Jeff Janes for the extra investigation.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
This allows these modules to be installed into a database without
superuser privileges (assuming that the DBA or sysadmin has installed
the module's files in the expected place). You only need CREATE
privilege on the current database, which by default would be
available to the database owner.
The following modules are marked trusted:
btree_gin
btree_gist
citext
cube
dict_int
earthdistance
fuzzystrmatch
hstore
hstore_plperl
intarray
isn
jsonb_plperl
lo
ltree
pg_trgm
pgcrypto
seg
tablefunc
tcn
tsm_system_rows
tsm_system_time
unaccent
uuid-ossp
In the future we might mark some more modules trusted, but there
seems to be no debate about these, and on the whole it seems wise
to be conservative with use of this feature to start out with.
Discussion: https://postgr.es/m/32315.1580326876@sss.pgh.pa.us
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
This adds a built-in function to generate UUIDs.
PostgreSQL hasn't had a built-in function to generate a UUID yet,
relying on external modules such as uuid-ossp and pgcrypto to provide
one. Now that we have a strong random number generator built-in, we
can easily provide a version 4 (random) UUID generation function.
This patch takes the existing function gen_random_uuid() from pgcrypto
and makes it a built-in function. The pgcrypto implementation now
internally redirects to the built-in one.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/6a65610c-46fc-2323-6b78-e8086340a325@2ndquadrant.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
As things stood, buildfarm member dory failed. MSVC versions lacking
stdint.h are unusable for building PostgreSQL, but pg_config.h.win32
doesn't know that. Even so, we support other systems lacking stdint.h,
including buildfarm member gaur. Per a suggestion from Tom Lane.
Discussion: https://postgr.es/m/9598.1550353336@sss.pgh.pa.us
Upstream fixed bugs over the years, but none are confirmed to have
affected pgcrypto. We're better off naively tracking upstream than
reactively maintaining a twelve-year-old snapshot of upstream. Add a
header comment describing the synchronization procedure. Discard use of
INVERT_COMPARE_RESULT(); the domain of the comparisons in question is
{-1,0,1}, controlled entirely by code in imath.c.
Andrew Gierth reviewed the Makefile change. Tom Lane reviewed the
synchronization procedure description.
Discussion: https://postgr.es/m/20190203035704.GA6226@rfd.leadboat.com
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
fe0a0b5, which has added a stronger random source in Postgres, has
introduced a thinko when creating a padding message which gets encrypted
for Elgamal. The padding message cannot have zeros, which are replaced
by random bytes. However if pg_strong_random() failed, the message
would finish by being considered in correct shape for encryption with
zeros.
Author: Tom Lane
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20186.1546188423@sss.pgh.pa.us
Backpatch-through: 10
Historically we forbade datatype-specific comparison functions from
returning INT_MIN, so that it would be safe to invert the sort order
just by negating the comparison result. However, this was never
really safe for comparison functions that directly return the result
of memcmp(), strcmp(), etc, as POSIX doesn't place any such restriction
on those library functions. Buildfarm results show that at least on
recent Linux on s390x, memcmp() actually does return INT_MIN sometimes,
causing sort failures.
The agreed-on answer is to remove this restriction and fix relevant
call sites to not make such an assumption; code such as "res = -res"
should be replaced by "INVERT_COMPARE_RESULT(res)". The same is needed
in a few places that just directly negated the result of memcmp or
strcmp.
To help find places having this problem, I've also added a compile option
to nbtcompare.c that causes some of the commonly used comparators to
return INT_MIN/INT_MAX instead of their usual -1/+1. It'd likely be
a good idea to have at least one buildfarm member running with
"-DSTRESS_SORT_INT_MIN". That's far from a complete test of course,
but it should help to prevent fresh introductions of such bugs.
This is a longstanding portability hazard, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/20180928185215.ffoq2xrq5d3pafna@alap3.anarazel.de
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Solaris 11.4 has built-in functions named b64_encode and b64_decode.
Rename ours to something else to avoid the conflict (fortunately,
ours are static so the impact is limited).
One could wish for less duplication of code in this area, but that
would be a larger patch and not very suitable for back-patching.
Since this is a portability fix, we want to put it into all supported
branches.
Report and initial patch by Rainer Orth, reviewed and adjusted a bit
by Michael Paquier
Discussion: https://postgr.es/m/ydd372wk28h.fsf@CeBiTec.Uni-Bielefeld.DE
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
The parenthesized style has only been used in a few modules. Change
that to use the style that is predominant across the whole tree.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Previously, gen_random_uuid() would fall back to a weak random number
generator, unlike gen_random_bytes() which would just fail. And this was
not made very clear in the docs. For consistency, also make
gen_random_uuid() fail outright, if compiled with --disable-strong-random.
Re-word the error message you get with --disable-strong-random. It is also
used by pgp functions that require random salts, and now also
gen_random_uuid().
Reported by Radek Slupik.
Discussion: https://www.postgresql.org/message-id/20170101232054.10135.50528@wrigleys.postgresql.org
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
This way both frontend and backends can use them. The functions are taken
from pgcrypto, which now fetches the source files it needs from
src/common/.
A new interface is designed for the SHA2 functions, which allow linking
to either OpenSSL or the in-core stuff taken from KAME as needed.
Michael Paquier, reviewed by Robert Haas.
Discussion: https://www.postgresql.org/message-id/CAB7nPqTGKuTM5jiZriHrNaQeVqp5e_iT3X4BFLWY_HyHxLvySQ%40mail.gmail.com
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
pgp-pubkey-DISABLED test has been unused since 2006, when support for
built-in bignum math was added (commit 1abf76e8). pgp-encrypt-DISABLED has
been unused forever, AFAICS.
Also remove a couple of unused error codes.
This reverts commit 9e083fd468. That was a
few bricks shy of a load:
* Query cancel stopped working
* Buildfarm member pademelon stopped working, because the box doesn't have
/dev/urandom nor /dev/random.
This clearly needs some more discussion, and a quite different patch, so
revert for now.
The old "low-level" API is deprecated, and doesn't support hardware
acceleration. And this makes the code simpler, too.
Discussion: <561274F1.1030000@iki.fi>
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
- /dev/random
Original patch by Magnus Hagander, with further work by Michael Paquier
and me.
Discussion: <CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com>
Prototypes for functions implementing V1-callable functions are no
longer necessary.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
OpenSSL officially only supports 1.0.1 and newer. Some OS distributions
still provide patches for 0.9.8, but anything older than that is not
interesting anymore. Let's simplify things by removing compatibility code.
Andreas Karlsson, with small changes by me.
Extension scripts should never use CREATE OR REPLACE for initial object
creation. If there is a collision with a pre-existing (probably
user-created) object, we want extension installation to fail, not silently
overwrite the user's object. Bloom and sslinfo both violated this precept.
Also fix a number of scripts that had no standard header (the file name
comment and the \echo...\quit guard). Probably the \echo...\quit hack
is less important now than it was in 9.1 days, but that doesn't mean
that individual extensions get to choose whether to use it or not.
And fix a couple of evident copy-and-pasteos in file name comments.
No need for back-patch: the REPLACE bugs are both new in 9.6, and the
rest of this is pretty much cosmetic.
Andreas Karlsson and Tom Lane
pgcrypto already supports key-stretching during symmetric encryption,
including the salted-and-iterated method; but the number of iterations
was not configurable. This commit implements a new s2k-count parameter
to pgp_sym_encrypt() which permits selecting a larger number of
iterations.
Author: Jeff Janes
Both Blowfish and DES implementations of crypt() can take arbitrarily
long time, depending on the number of rounds specified by the caller;
make sure they can be interrupted.
Author: Andreas Karlsson
Reviewer: Jeff Janes
Backpatch to 9.1.
Certain short salts crashed the backend or disclosed a few bytes of
backend memory. For existing salt-induced error conditions, emit a
message saying as much. Back-patch to 9.0 (all supported versions).
Josh Kupershmidt
Security: CVE-2015-5288
This has been the predominant outcome. When the output of decrypting
with a wrong key coincidentally resembled an OpenPGP packet header,
pgcrypto could instead report "Corrupt data", "Not text data" or
"Unsupported compression algorithm". The distinct "Corrupt data"
message added no value. The latter two error messages misled when the
decrypted payload also exhibited fundamental integrity problems. Worse,
error message variance in other systems has enabled cryptologic attacks;
see RFC 4880 section "14. Security Considerations". Whether these
pgcrypto behaviors are likewise exploitable is unknown.
In passing, document that pgcrypto does not resist side-channel attacks.
Back-patch to 9.0 (all supported versions).
Security: CVE-2015-3167
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
This function uses uninitialized stack and heap buffers as supplementary
entropy sources. Mark them so Memcheck will not complain. Back-patch
to 9.4, where Valgrind Memcheck cooperation first appeared.
Marko Tiikkaja
This covers alterations to buffer sizing and zeroing made between imath
1.3 and imath 1.20. Valgrind Memcheck identified the buffer overruns
and reliance on uninitialized data; their exploit potential is unknown.
Builds specifying --with-openssl are unaffected, because they use the
OpenSSL BIGNUM facility instead of imath. Back-patch to 9.0 (all
supported versions).
Security: CVE-2015-0243
Most callers pass a stack buffer. The ensuing stack smash can crash the
server, and we have not ruled out the viability of attacks that lead to
privilege escalation. Back-patch to 9.0 (all supported versions).
Marko Tiikkaja
Security: CVE-2015-0243
Coverity points out that mdc_finish returns a pointer to a local buffer
(which of course is gone as soon as the function returns), leaving open
a risk of misbehaviors possibly as bad as a stack overwrite.
In reality, the only possible call site is in process_data_packets()
which does not examine the returned pointer at all. So there's no
live bug, but nonetheless the code is confusing and risky. Refactor
to avoid the issue by letting process_data_packets() call mdc_finish()
directly instead of going through the pullf_read() API.
Although this is only cosmetic, it seems good to back-patch so that
the logic in pgp-decrypt.c stays in sync across all branches.
Marko Kreen
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
This fixes a scenario in which pgp_sym_decrypt() failed with "Wrong key
or corrupt data" on messages whose length is 6 less than a power of 2.
Per bug #11905 from Connor Penhale. Fix by Marko Tiikkaja, regression
test case from Jeff Janes.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
This add a new pgp_armor_headers function to extract armor headers from an
ASCII-armored blob, and a new overloaded variant of the armor function, for
constructing an ASCII-armor with extra headers.
Marko Tiikkaja and me.
Instead of trying to accurately calculate the space needed, use a StringInfo
that's enlarged as needed. This is just moving things around currently - the
old code was not wrong - but this is in preparation for a patch that adds
support for extra armor headers, and would make the space calculation more
complicated.
Marko Tiikkaja
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
ws2_32 is the new version of the library that should be used, as
it contains the require functionality from wsock32 as well as some
more (which is why some binaries were already using ws2_32).
Michael Paquier, reviewed by MauMau
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
Specifically, on-stack memset() might be removed, so:
* Replace memset() with px_memset()
* Add px_memset to copy_crlf()
* Add px_memset to pgp-s2k.c
Patch by Marko Kreen
Report by PVS-Studio
Backpatch through 8.4.
Michael Paquier
Tom Lane
Noah Misch
Alvaro Herrera
Bruce Momjian
Andres Freund
Amit Kapila
Peter Eisentraut
Heikki Linnakangas
Robert Haas
Peter Eisentraut
Magnus Hagander
Fujii Masao