Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
postgres_fdw aborts remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
aborts. This patch allows it to abort the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_abort". The default is false.
Etsuro Fujita, reviewed by David Zhang.
Discussion: http://postgr.es/m/CAPmGK15FuPVGx3TGHKShsbPKKtF1y58-ZLcKoxfN-nqLj1dZ%3Dg%40mail.gmail.com
postgres_fdw.application_name relies on MyProcPort to define the data
that should be added to escape sequences %u (user name) or %d (database
name). However this code could be run in processes that lack a
MyProcPort, like an autovacuum process, causing crashes.
The code generating the application name is made more flexible with this
commit, so as it now generates no data for %u and %d if MyProcPort is
missing, and a simple "unknown" if MyProcPort exists, but the expected
fields are not set.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/17789-8b31c5a4672b74d9@postgresql.org
Backpatch-through: 15
When collecting ANALYZE sample on foreign tables, postgres_fdw fetched
all rows and performed the sampling locally. For large tables this means
transferring and immediately discarding large amounts of data.
This commit allows the sampling to be performed on the remote server,
transferring only the much smaller sample. The sampling is performed
using the built-in TABLESAMPLE methods (system, bernoulli) or random()
function, depending on the remote server version.
Remote sampling can be enabled by analyze_sampling on the foreign server
and/or foreign table, with supported values 'off', 'auto', 'system',
'bernoulli' and 'random'. The default value is 'auto' which uses either
'bernoulli' (TABLESAMPLE method) or 'random' (for remote servers without
TABLESAMPLE support).
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
postgres_fdw commits remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
commits. This patch allows it to commit the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_commit". The default is false.
Etsuro Fujita, reviewed by Fujii Masao and David Zhang.
Discussion: http://postgr.es/m/CAPmGK17dAZCXvwnfpr1eTfknTGdt%3DhYTV9405Gt5SqPOX8K84w%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
This commit adds postgres_fdw.application_name GUC which specifies
a value for application_name configuration parameter used
when postgres_fdw establishes a connection to a foreign server.
This GUC setting always overrides application_name option of
the foreign server object. This GUC is useful when we want to
specify our own application_name per remote connection.
Previously application_name of a remote connection could be set
basically only via options of a server object. But which meant that
every session connecting to the same foreign server basically
should use the same application_name. Also if we want to change
the setting, we had to execute "ALTER SERVER ... OPTIONS ..." command.
It was inconvenient.
Author: Hayato Kuroda
Reviewed-by: Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
This commit adds a new option keep_connections that controls
whether postgres_fdw keeps the connections to the foreign server open
so that the subsequent queries can re-use them. This option can only be
specified for a foreign server. The default is on. If set to off,
all connections to the foreign server will be discarded
at the end of transaction. Closed connections will be re-established
when they are necessary by future queries using a foreign table.
This option is useful, for example, when users want to prevent
the connections from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy
Reviewed-by: Alexey Kondratov, Vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Currently postgres_fdw doesn't permit a non-superuser to connect to a
foreign server without specifying a password, or to use an
authentication mechanism that doesn't use the password. This is to avoid
using the settings and identity of the user running Postgres.
However, this doesn't make sense for all authentication methods. We
therefore allow a superuser to set "password_required 'false'" for user
mappings for the postgres_fdw. The superuser must ensure that the
foreign server won't try to rely solely on the server identity (e.g.
trust, peer, ident) or use an authentication mechanism that relies on the
password settings (e.g. md5, scram-sha-256).
This feature is a prelude to better support for sslcert and sslkey
settings in user mappings.
Author: Craig Ringer.
Discussion: https://postgr.es/m/075135da-545c-f958-fed0-5dcb462d6dae@2ndQuadrant.com
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The default fetch size of 100 rows might not be right in every
environment, so allow users to configure it.
Corey Huinker, reviewed by Kyotaro Horiguchi, Andres Freund, and me.
The user can whitelist specified extension(s) in the foreign server's
options, whereupon we will treat immutable functions and operators of those
extensions as candidates to be sent for remote execution.
Whitelisting an extension in this way basically promises that the extension
exists on the remote server and behaves compatibly with the local instance.
We have no way to prove that formally, so we have to rely on the user to
get it right. But this seems like something that people can usually get
right in practice.
We might in future allow functions and operators to be whitelisted
individually, but extension granularity is a very convenient special case,
so it got done first.
The patch as-committed lacks any regression tests, which is unfortunate,
but introducing dependencies on other extensions for testing purposes
would break "make installcheck" scenarios, which is worse. I have some
ideas about klugy ways around that, but it seems like material for a
separate patch. For the moment, leave the problem open.
Paul Ramsey, hacked up a bit more by me
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
Bruce Momjian
Tom Lane
Stephen Frost
Etsuro Fujita
Michael Paquier
Tomas Vondra
Peter Eisentraut
Andres Freund
Fujii Masao
Andrew Dunstan
Amit Kapila
Peter Eisentraut
Robert Haas