The documentation for PGTYPESnumeric_to_long only mentioned errno
being set to indicate overflow but the code also sets errno when
underflow happens.
Reported-by: Aidar Imamov <a.imamov@postgrespro.ru>
Discussion: https://postgr.es/m/eebf0ad50ad4321d65d2d64dd6b7f17d@postgrespro.ru
It must be run on the target server and should be able to connect to
the source server (publisher) and the target server (subscriber). All
tables in the specified database(s) are included in the logical
replication setup. A pair of publication and subscription objects are
created for each database.
The main advantage of pg_createsubscriber over the common logical
replication setup is the initial data copy. It also reduces the
catchup phase.
Some prerequisites must be met to successfully run it. It is
basically the logical replication requirements. It starts creating a
publication using FOR ALL TABLES and a replication slot for each
specified database. Write recovery parameters into the target data
directory and start the target server. It specifies the LSN of the
last replication slot (replication start point) up to which the
recovery will proceed. Wait until the target server is promoted.
Create one subscription per specified database (using publication and
replication slot created in a previous step) on the target server.
Set the replication progress to the replication start point for each
subscription. Enable the subscription for each specified database on
the target server. And finally, change the system identifier on the
target server.
Author: Euler Taveira <euler.taveira@enterprisedb.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/5ac50071-f2ed-4ace-a8fd-b892cffd33eb@www.fastmail.com
This commit adds a new property called last_inactive_time for slots. It is
set to 0 whenever a slot is made active/acquired and set to the current
timestamp whenever the slot is inactive/released or restored from the disk.
Note that we don't set the last_inactive_time for the slots currently being
synced from the primary to the standby because such slots are typically
inactive as decoding is not allowed on those.
The 'last_inactive_time' will be useful on production servers to debug and
analyze inactive replication slots. It will also help to know the lifetime
of a replication slot - one can know how long a streaming standby, logical
subscriber, or replication slot consumer is down.
The 'last_inactive_time' will also be useful to implement inactive
timeout-based replication slot invalidation in a future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Straight-forward index-level REINDEX is not supported with multiple jobs as
we cannot control the concurrent processing of multiple indexes depending on
the same relation. Instead, we dedicate the whole table to certain reindex
job. Thus, if indexes in the lists belong to different tables, that gives us
a fair level of parallelism.
This commit teaches get_parallel_object_list() to fetch table names for
indexes in the case of index-level REINDEX. The same tables are grouped
together in the output order, and the list of indexes is also rebuilt to
match that order. Later during processingof that list, we push indexes
belonging to the same table into the same job.
Discussion: https://postgr.es/m/CACG%3DezZU_VwDi-1PN8RUSE6mcYG%2BYx1NH_rJO4%2BKe-mKqLp%3DNw%40mail.gmail.com
Author: Maxim Orlov, Svetlana Derevyanko, Alexander Korotkov
Reviewed-by: Michael Paquier
Since commit 3d14e171e9, SET ROLE has required the current session
user to have membership with the SET option in the target role, but
the SET ROLE documentation only mentions the membership
requirement. This commit adds this important detail to the SET
ROLE page.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CA%2BRLCQysHtME0znk2KUMJN343ksboSRQSU-hCnOjesX6VK300Q%40mail.gmail.com
Backpatch-through: 16
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
Till now, the reason for replication slot invalidation is not tracked
directly in pg_replication_slots. A recent commit 007693f2a3 added
'conflict_reason' to show the reasons for slot conflict/invalidation, but
only for logical slots.
This commit adds a new column 'invalidation_reason' to show invalidation
reasons for both physical and logical slots. And, this commit also turns
'conflict_reason' text column to 'conflicting' boolean column (effectively
reverting commit 007693f2a3). The 'conflicting' column is true for
invalidation reasons 'rows_removed' and 'wal_level_insufficient' because
those make the slot conflict with recovery. When 'conflicting' is true,
one can now look at the new 'invalidation_reason' column for the reason
for the logical slot's conflict with recovery.
The new 'invalidation_reason' column will also be useful to track other
invalidation reasons in the future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/ZfR7HuzFEswakt/a%40ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
The old text claims that HOT completely removes old row versions.
It was unclear whether it just meant the tuples themselves, or the
tuples together with their line pointers. If it meant the former,
it was wrong because we can remove dead row versions even when no
HOT updates have occurred, so it's not describing a benefit of HOT.
If it meant the latter, it was wrong because HOT doesn't allow
reclaiming the root tuple's line pointer.
This section does seems like it's intended to be more of an
informal introduction to HOT than a precise technical description
of every detail of how it works, but we still don't want it to
say things that are just not true, so update the text enough
to avoid that.
Patch by me, reviewed by James Coleman (although he would have
preferred more extensive changes) and Shubham Khanna.
Discussion: http://postgr.es/m/CA+TgmobH6DPmR-u--Xgeg8cYUwhDhypNsv38nDrAJyf_xno=TQ@mail.gmail.com
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Commit cca97ce6a6 allowed dbname in pg_basebackup connstring and in this
commit we allow it to be written in postgresql.auto.conf when -R option is
used. The database name in the connection string will be used by the
logical replication slot synchronization on standby.
The dbname will be recorded only if specified explicitly in the connection
string or environment variable.
Masahiko Sawada hasn't reviewed the code in detail but endorsed the idea.
Author: Vignesh C, Kuroda Hayato
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAB8KJ=hdKdg+UeXhReeHpHA6N6v3e0qFF+ZsPFHk9_ThWKf=2A@mail.gmail.com
In combination with to_regtype, this allows converting a string to
the "canonicalized" form emitted by format_type. That usage requires
parsing the string twice, which is slightly annoying but not really
too expensive. We considered alternatives such as returning a record
type, but that way was notationally uglier than this, and possibly
less flexible.
Like to_regtype(), we'd rather that this return NULL for any bad
input, but the underlying type-parsing logic isn't yet capable of
not throwing syntax errors. Adjust the documentation for both
functions to point that out.
In passing, fix up a couple of nearby entries in the System Catalog
Information Functions table that had not gotten the word about our
since-v13 convention for displaying function usage examples.
David Wheeler and Erik Wienhold, reviewed by Pavel Stehule, Jim Jones,
and others.
Discussion: https://postgr.es/m/DF2324CA-2673-4ABE-B382-26B5770B6AA3@justatheory.com
The builtin C.UTF-8 locale has similar semantics to the libc locale of
the same name. That is, code point sort order (fast, memcmp-based)
combined with Unicode semantics for character operations such as
pattern matching, regular expressions, and
LOWER()/INITCAP()/UPPER(). The character semantics are based on
Unicode simple case mappings.
The builtin provider's C.UTF-8 offers several important advantages
over libc:
* faster sorting -- benefits from additional optimizations such as
abbreviated keys and varstrfastcmp_c
* faster case conversion, e.g. LOWER(), at least compared with some
libc implementations
* available on all platforms with identical semantics, and the
semantics are stable, testable, and documentable within a given
Postgres major version
Being based on memcmp, the builtin C.UTF-8 locale does not offer
natural language sort order. But it is an improvement for most use
cases that might otherwise use libc's "C.UTF-8" locale, as well as
many use cases that use libc's "C" locale.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Historically we've printed SubPlan expression nodes as "(SubPlan N)",
which is pretty uninformative. Trying to reproduce the original SQL
for the subquery is still as impractical as before, and would be
mighty verbose as well. However, we can still do better than that.
Displaying the "testexpr" when present, and adding a keyword to
indicate the SubLinkType, goes a long way toward showing what's
really going on.
In addition, this patch gets rid of EXPLAIN's use of "$n" to represent
subplan and initplan output Params. Instead we now print "(SubPlan
N).colX" or "(InitPlan N).colX" to represent the X'th output column
of that subplan. This eliminates confusion with the use of "$n" to
represent PARAM_EXTERN Params, and it's useful for the first part of
this change because it eliminates needing some other indication of
which subplan is referenced by a SubPlan that has a testexpr.
In passing, this adds simple regression test coverage of the
ROWCOMPARE_SUBLINK code paths, which were entirely unburdened
by testing before.
Tom Lane and Dean Rasheed, reviewed by Aleksander Alekseev.
Thanks to Chantal Keller for raising the question of whether
this area couldn't be improved.
Discussion: https://postgr.es/m/2838538.1705692747@sss.pgh.pa.us
Based on comments from Peter Eisentraut.
* Document CREATE DATABASE ... BUILTIN_LOCALE.
* Determine required encoding based on locale name for CREATE
COLLATION. Use -1 for "C" (requires catversion bump).
* initdb output fixups.
* Make ctype_is_c a constant true for now.
* Fixups to ICU 010_create_database.pl test.
Discussion: https://postgr.es/m/4135cf11-206d-40ed-96c0-9363c1232379@eisentraut.org
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
This function returns the chunk_id of an on-disk TOASTed value. If
the value is un-TOASTed or not on-disk, it returns NULL. This is
useful for identifying which values are actually TOASTed and for
investigating "unexpected chunk number" errors.
Bumps catversion.
Author: Yugo Nagata
Reviewed-by: Jian He
Discussion: https://postgr.es/m/20230329105507.d764497456eeac1ca491b5bd%40sraoss.co.jp
New provider for collations, like "libc" or "icu", but without any
external dependency.
Initially, the only locale supported by the builtin provider is "C",
which is identical to the libc provider's "C" locale. The libc
provider's "C" locale has always been treated as a special case that
uses an internal implementation, without using libc at all -- so the
new builtin provider uses the same implementation.
The builtin provider's locale is independent of the server environment
variables LC_COLLATE and LC_CTYPE. Using the builtin provider, the
database collation locale can be "C" while LC_COLLATE and LC_CTYPE are
set to "en_US", which is impossible with the libc provider.
By offering a new builtin provider, it clarifies that the semantics of
a collation using this provider will never depend on libc, and makes
it easier to document the behavior.
Discussion: https://postgr.es/m/ab925f69-5f9d-f85e-b87c-bd2a44798659@joeconway.com
Discussion: https://postgr.es/m/dd9261f4-7a98-4565-93ec-336c1c110d90@manitou-mail.org
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
pg_stat_checkpointer contains statistics for checkpoints and restartpoints.
Before 12915a58ee documentation said only about checkpoints implying that
restartpoint is the variation of checkpoint. 12915a58ee introduced
new separate statistics fields for restartpoints. This commit explicitly
documents fields that are relevant for both checkpoints and restartpoints.
Reported-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevExav5-SR0x%2BG9kBUMV0G8XsvSUfuyyqmYBBJi6VHns6sw%40mail.gmail.com
Reviewed-by: Anton A. Melnikov
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
Before this patch, if you took a full backup on server A and then
tried to use the backup manifest to take an incremental backup on
server B, it wouldn't know that the manifest was from a different
server and so the incremental backup operation could potentially
complete without error. When you later tried to run pg_combinebackup,
you'd find out that your incremental backup was and always had been
invalid. That's poor timing, because nobody likes finding out about
backup problems only at restore time.
With this patch, you'll get an error when trying to take the (invalid)
incremental backup, which seems a lot nicer.
Amul Sul, revised by me. Review by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYLZzbSAMM3cAjV4Y+iCRZn-bR9H2+Mdz7NdaJFU1Zb5w@mail.gmail.com
In the synopsis, make the syntax for merge_update consistent with the
syntax for a plain UPDATE command. It was missing the optional "ROW"
keyword that can be used in a multi-column assignment, and the option
to assign from a multi-column subquery, both of which have been
supported by MERGE since it was introduced.
In the parameters section for the with_query parameter, mention that
WITH RECURSIVE isn't supported, since this is different from plain
INSERT, UPDATE, and DELETE commands. While at it, move that entry to
the top of the list, for consistency with the other pages.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWoQyWkMFfu7JXXQr8dA6%3DgxjhYzgpuBP2oz0QoJTxGWw%40mail.gmail.com
The existing PQcancel API uses blocking IO, which makes PQcancel
impossible to use in an event loop based codebase without blocking the
event loop until the call returns. It also doesn't encrypt the
connection over which the cancel request is sent, even when the original
connection required encryption.
This commit adds a PQcancelConn struct and assorted functions, which
provide a better mechanism of sending cancel requests; in particular all
the encryption used in the original connection are also used in the
cancel connection. The main entry points are:
- PQcancelCreate creates the PQcancelConn based on the original
connection (but does not establish an actual connection).
- PQcancelStart can be used to initiate non-blocking cancel requests,
using encryption if the original connection did so, which must be
pumped using
- PQcancelPoll.
- PQcancelReset puts a PQcancelConn back in state so that it can be
reused to send a new cancel request to the same connection.
- PQcancelBlocking is a simpler-to-use blocking API that still uses
encryption.
Additional functions are
- PQcancelStatus, mimicks PQstatus;
- PQcancelSocket, mimicks PQcancelSocket;
- PQcancelErrorMessage, mimicks PQerrorMessage;
- PQcancelFinish, mimicks PQfinish.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
Presently, reindexdb's --table, --schema, --index, and --system
options cannot be used together with --all, i.e., you cannot
specify objects to process in all databases. This commit removes
this unnecessary restriction. Furthermore, it removes the
restriction that --system cannot be used with --table, --schema,
and --index. There is no such restriction for the latter options,
and there is no technical reason to disallow these combinations.
Reviewed-by: Kyotaro Horiguchi, Dean Rasheed
Discussion: https://postgr.es/m/20230628232402.GA1954626%40nathanxps13
Presently, clusterdb's --table option cannot be used together with
--all, i.e., you cannot specify tables to process in all databases.
This commit removes this unnecessary restriction. In passing,
change the synopsis in the documentation to use "[option...]"
instead of "[--verbose | -v]". There are other general-purpose
options (e.g., --quiet and --echo), but the synopsis currently only
lists --verbose.
Reviewed-by: Kyotaro Horiguchi, Dean Rasheed
Discussion: https://postgr.es/m/20230628232402.GA1954626%40nathanxps13
The list of connection statuses that PQstatus might return during an
asynchronous connection attempt was outdated:
1. CONNECTION_SETENV is never returned anymore and is only part of the
enum for backwards compatibility, so remove it from the docs.
2. CONNECTION_CHECK_STANDBY and CONNECTION_GSS_STARTUP were not listed,
so add them.
CONNECTION_NEEDED and CONNECTION_CHECK_TARGET are not listed in the docs
on purpose, since these are internal states that can never be observed
by a caller of PQstatus.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQRb21spiiykQ48rzz8w+Hcykz+mB2_hxR65D9Qk6nnw=w@mail.gmail.com
Presently, vacuumdb's --table, --schema, and --exclude-schema
options cannot be used together with --all, i.e., you cannot
specify tables or schemas to process in all databases. This commit
removes this unnecessary restriction, thus enabling potentially
useful commands like "vacuumdb --all --schema pg_catalog".
Reviewed-by: Kyotaro Horiguchi, Dean Rasheed
Discussion: https://postgr.es/m/20230628232402.GA1954626%40nathanxps13
We expect the 'two_phase' and 'failover' properties to match between the
slot on the publisher and a subscription option on the subscriber.
Otherwise, the slot on the publisher may behave differently from what the
subscription's failover option says.
Author: Bertrand Drouvot
Reviewed-by: Peter Smith, Tristen Raab, Amit Kapila
Discussion: https://postgr.es/m/ZbkYrLPhH+RxpZlW@ip-10-97-1-34.eu-west-3.compute.internal
Rename pg_collation.colliculocale to colllocale, and
pg_database.daticulocale to datlocale. These names reflects that the
fields will be useful for the upcoming builtin provider as well, not
just for ICU.
This is purely a rename; no changes to the meaning of the fields.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Peter Eisentraut
This patch provides a way to ensure that physical standbys that are
potential failover candidates have received and flushed changes before
the primary server making them visible to subscribers. Doing so guarantees
that the promoted standby server is not lagging behind the subscribers
when a failover is necessary.
The logical walsender now guarantees that all local changes are sent and
flushed to the standby servers corresponding to the replication slots
specified in 'standby_slot_names' before sending those changes to the
subscriber.
Additionally, the SQL functions pg_logical_slot_get_changes,
pg_logical_slot_peek_changes and pg_replication_slot_advance are modified
to ensure that they process changes for failover slots only after physical
slots specified in 'standby_slot_names' have confirmed WAL receipt for those.
Author: Hou Zhijie and Shveta Malik
Reviewed-by: Masahiko Sawada, Peter Smith, Bertrand Drouvot, Ajin Cherian, Nisha Moond, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
This option can be used to switch a relation to use the access method
set by default_table_access_method when running the command.
This has come up when discussing the possibility to support setting
pg_class.relam for partitioned tables (left out here as future work),
while being useful on its own for relations with physical storage as
these must have an access method set.
Per suggestion from Justin Pryzby.
Author: Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/ZeCZ89xAVFeOmrQC@pryzbyj2023
The copy_file_range() system call is available on at least Linux and
FreeBSD, and asks the kernel to use efficient ways to copy ranges of a
file. Options available to the kernel include sharing block ranges
(similar to --clone mode), and pushing down block copies to the storage
layer.
For automated testing, see PG_TEST_PG_UPGRADE_MODE. (Perhaps in a later
commit we could consider setting this mode for one of the CI targets.)
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGKe7Hb0-UNih8VD5UNZy5-ojxFb3Pr3xSBBL8qj2M2%3DdQ%40mail.gmail.com
pg_constraint.conwithoutoverlaps was recently added to support primary
keys and unique constraints with the WITHOUT OVERLAPS clause. An
upcoming patch provides the foreign-key side of this functionality,
but the syntax there is different and uses the keyword PERIOD. It
would make sense to use the same pg_constraint field for both of
these, but then we should pick a more general name that conveys "this
constraint has a temporal/period-related feature". conperiod works
for that and is nicely compact. Changing this now avoids possibly
having to introduce versioning into clients. Note there are still
some "without overlaps" variables left, which deal specifically with
the parsing of the primary key/unique constraint feature.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Presently, if an archive module's check_configured_cb callback
returns false, a generic WARNING message is emitted, which
unfortunately provides no actionable details about the reason why
the module is not configured. This commit introduces a macro that
archive module authors can use to add a DETAIL line to this WARNING
message.
Co-authored-by: Tung Nguyen
Reviewed-by: Daniel Gustafsson, Álvaro Herrera
Discussion: https://postgr.es/m/4109578306242a7cd5661171647e11b2%40oss.nttdata.com
The adminpack extension was only used to support pgAdmin III, which
in turn was declared EOL many years ago. Removing the extension also
allows us to remove functions from core as well which were only used
to support old version of adminpack.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACUmL5TraYBUBqDZBi1C+Re8_=SekqGYqYprj_W8wygQ8w@mail.gmail.com
Commit 5f2e179bd3 missed one place in rules.sgml that should have
mentioned MERGE. Also, be more specific when saying that MERGE doesn't
support rules, since it does support SELECT rules.
The datatype for analyze_sampling had accidentally been set to text
and not string. Backpatch to v16 where analyze_sampling first was
introduced.
Author: Shinya Kato <Shinya11.Kato@oss.nttdata.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/7fd9166b9fda267411793f39986d7f24@oss.nttdata.com
Backpatch-through: v16
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Correct out-of-date text that said the "default" collation is always
based on LC_COLLATE and LC_CTYPE.
Also reformat into a list to make it easier to understand and compare
the available collations, and briefly document the stability
characteristics of each one.
Discussion: https://postgr.es/m/4a69d067374d2f6bfb66f5bfb2ab9a020493d49f.camel@j-davis.com
This allows the target relation of MERGE to be an auto-updatable or
trigger-updatable view, and includes support for WITH CHECK OPTION,
security barrier views, and security invoker views.
A trigger-updatable view must have INSTEAD OF triggers for every type
of action (INSERT, UPDATE, and DELETE) mentioned in the MERGE command.
An auto-updatable view must not have any INSTEAD OF triggers. Mixing
auto-update and trigger-update actions (i.e., having a partial set of
INSTEAD OF triggers) is not supported.
Rule-updatable views are also not supported, since there is no
rewriter support for non-SELECT rules with MERGE operations.
Dean Rasheed, reviewed by Jian He and Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCVcB1g0nmxuEc-A+gGB0HnfcGQNGYH7gS=7rq0u0zOBXA@mail.gmail.com
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
The new names are intended to match those in an upcoming patch that adds
a few GUCs to configure the SLRU buffer sizes.
Backwards compatibility concern: this changes the accepted names for
function pg_stat_slru_rest(). Since this function recognizes "any other
string" as a request to reset the entry for "other", this means that
calling it with the old names would silently reset "other" instead of
doing nothing or throwing an error.
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/202402261616.dlriae7b6emv@alvherre.pgsql
Add a note about the additional privileges required after the fix in
4989ce7264 (wording per Tom Lane); also change marked-up mentions of
"target_table_name" to be simply "the target table" or the like. Also,
note that "join_condition" is scouted for requisite privileges.
Backpatch to 15.
Discussion: https://postgr.es/m/202402211653.zuh6objy3z72@alvherre.pgsql
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
The explanation of interval's behavior in datatype.sgml wasn't wrong
exactly, but it was unclear, partly because it buried the lede about
there being three internal fields. Rearrange and wordsmith for more
clarity.
The discussion of extract() claimed that input of type date was
handled by casting, but actually there's been a separate SQL function
taking date for a very long time. Also, it was mostly silent about
how interval inputs are handled, but there are several field types
for which it seems useful to be specific.
Improve discussion of justify_days()/justify_hours() too.
In passing, remove vertical space in some groups of examples,
as there was little consistency about whether to have such space
or not. (I only did this within the datetime functions section;
there are some related inconsistencies elsewhere.)
Per discussion of bug #18348 from Michael Bondarenko. There
may be some code changes coming out of that discussion too,
but we likely won't back-patch them. This docs-only patch
seems useful to back-patch, though I only carried it back to
v13 because it didn't apply easily in v12.
Discussion: https://postgr.es/m/18348-b097a3587dfde8a4@postgresql.org
A child table can specify a compression or storage method different
from its parents. This was previously an error. (But this was
inconsistently enforced because for example the settings could be
changed later using ALTER TABLE.) This now also allows an explicit
override if multiple parents have different compression or storage
settings, which was previously an error that could not be overridden.
The compression and storage properties remains unchanged in a child
inheriting from parent(s) after its creation, i.e., when using ALTER
TABLE ... INHERIT. (This is not changed.)
Before this change, the error detail would mention the first pair of
conflicting parent compression or storage methods. But with this
change it waits till the child specification is considered by which
time we may have encountered many such conflicting pairs. Hence the
error detail after this change does not include the conflicting
compression/storage methods. Those can be obtained from parent
definitions if necessary. The code to maintain list of all
conflicting methods or even the first conflicting pair does not seem
worth the convenience it offers. This change is inline with what we
do with conflicting default values.
Before this commit, the specified storage method could be stored in
ColumnDef::storage (CREATE TABLE ... LIKE) or ColumnDef::storage_name
(CREATE TABLE ...). This caused the MergeChildAttribute() and
MergeInheritedAttribute() to ignore a storage method specified in the
child definition since it looked only at ColumnDef::storage. This
commit removes ColumnDef::storage and instead uses
ColumnDef::storage_name to save any storage method specification. This
is similar to how compression method specification is handled.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/24656cec-d6ef-4d15-8b5b-e8dfc9c833a7@eisentraut.org
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Setting the environment variable PG_TEST_INITDB_EXTRA_OPTS passes
extra options to initdb run by pg_regress or
PostgreSQL::Test::Cluster's init.
This can be useful for a wide variety of uses, like running all tests
with checksums enabled, or with JIT enabled, or with different GUC
settings, or with different locale settings. (Not all tests are going
to pass with arbitrary options, but it is useful to run this against
specific test suites.)
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d4d2ad9f-1c1d-47a1-bb4d-c10a747d4f15%40eisentraut.org
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
The pgcrypto docs contained a set of links for useful reading and
technical references. These sets of links were however not actively
curated and had stale content and dead links. Rather than investing
time into maintining these, this removes them altogether since there
are lots of resources online which are actively maintained.
Backpatch to all supported versions since these links have been in
the docs for a long time.
Reported-by: Hanefi Onaldi <hanefi.onaldi@microsoft.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/170774255387.3279713.2822272755998870925@wrigleys.postgresql.org
Backpatch-through: v12
This commit introduces a new SQL function pg_sync_replication_slots()
which is used to synchronize the logical replication slots from the
primary server to the physical standby so that logical replication can be
resumed after a failover or planned switchover.
A new 'synced' flag is introduced in pg_replication_slots view, indicating
whether the slot has been synchronized from the primary server. On a
standby, synced slots cannot be dropped or consumed, and any attempt to
perform logical decoding on them will result in an error.
The logical replication slots on the primary can be synchronized to the
hot standby by using the 'failover' parameter of
pg-create-logical-replication-slot(), or by using the 'failover' option of
CREATE SUBSCRIPTION during slot creation, and then calling
pg_sync_replication_slots() on standby. For the synchronization to work,
it is mandatory to have a physical replication slot between the primary
and the standby aka 'primary_slot_name' should be configured on the
standby, and 'hot_standby_feedback' must be enabled on the standby. It is
also necessary to specify a valid 'dbname' in the 'primary_conninfo'.
If a logical slot is invalidated on the primary, then that slot on the
standby is also invalidated.
If a logical slot on the primary is valid but is invalidated on the
standby, then that slot is dropped but will be recreated on the standby in
the next pg_sync_replication_slots() call provided the slot still exists
on the primary server. It is okay to recreate such slots as long as these
are not consumable on standby (which is the case currently). This
situation may occur due to the following reasons:
- The 'max_slot_wal_keep_size' on the standby is insufficient to retain
WAL records from the restart_lsn of the slot.
- 'primary_slot_name' is temporarily reset to null and the physical slot
is removed.
The slot synchronization status on the standby can be monitored using the
'synced' column of pg_replication_slots view.
A functionality to automatically synchronize slots by a background worker
and allow logical walsenders to wait for the physical will be done in
subsequent commits.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian based on an earlier version by Peter Eisentraut
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
The macOS Finder application creates .DS_Store files in directories
when opened, which creates problems for serverside utilities which
expect all files to be PostgreSQL specific files. Skip these files
when encountered in pg_checksums, pg_rewind and pg_basebackup.
This was extracted from a larger patchset for skipping hidden files
and system files, where the concencus was to just skip these. Since
this is equally likely to happen in every version, backpatch to all
supported versions.
Reported-by: Mark Guertin <markguertin@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tobias Bussmann <t.bussmann@gmx.net>
Discussion: https://postgr.es/m/E258CE50-AB0E-455D-8AAD-BB4FE8F882FB@gmail.com
Backpatch-through: v12
Timezones are not immutable and so neither is any function that relies on
them. In commit 66ea94e8, we introduced a few methods which do casting
from one time to another and thus may involve the current timezone. To
preserve the immutability of jsonpath functions currently marked
immutable, disallow these methods from being called from non-TZ aware
functions.
Jeevan Chalke, per a report from Jian He.
Commit b0f0a9432d backpatched some code from upstream DocBook XSL to
our customization layer. It turned out that this failed to work with
anything but the latest DocBook XSL upstream version (1.79.*), because
the backpatched code references an XSLT parameter (autolink.index.see)
that is not defined in earlier versions (because the feature it is
used for did not exist yet).
There is no way in XSLT to test whether a parameter is declared before
the stylesheet processor tries and fails to access it. So the
possibilities to fix this would be to either remove the code that uses
the parameter (and thus give up on the feature it is used for) or
declare the parameter in our customization layer. The latter seems
easier, and with a few more lines of code we can backport the entire
autolink.index.see feature, so let's do that. (If we didn't, then
with older stylesheets the parameter will appear as on, but it won't
actually do anything, because of the way the stylesheets are laid out,
so it's less confusing to just make it work.)
With this, the documentation build should work again with docbook-xsl
versions 1.77.*, 1.78.*, and 1.79.* (which already worked before).
Version 1.76.1 already didn't work before all this, so was not
considered here.
Reported-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9077b779-a9f8-09c8-6e85-da1ebfba15af@eisentraut.org
Cover scram_iterations, which was added in commit b577743000. While
at it, turn the list into a <simplelist> with 2 columns, which is much
nicer to read.
In master, remove mentions of antediluvian versions before which some
parameters were not reported.
Noticed while investigating a question by Maiquel Grassi.
Backpatch to 16.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/202401301236.mc5ebrohhtsd@alvherre.pgsql
Following are a few clean-ups related to failover option support in slots:
1. Improve the documentation in create_subscription.sgml.
2. Remove the spurious blank line in subscriptioncmds.c.
3. Remove the NOTICE for alter_replication_slot in subscriptioncmds.c as
we would sometimes print it even when nothing has changed. One can find
the change by enabling log_replication_commands on the publisher.
4. Optimize ReplicationSlotAlter() function to prevent disk flushing when
the slot's data remains unchanged.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Discussion: https://postgr.es/m/OS0PR01MB57164904651FB588A518E98894472@OS0PR01MB5716.jpnprd01.prod.outlook.com
The pg_stat_io and pg_stat_copy_progress view docs spelled "I/O" as "IO"
or even "io" in some places when not referring to literal names or
string values.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87fry6lx5s.fsf@wibble.ilmari.org
Role option management was changed in Postgres 16. This patch improves
the docs around these changes, including CREATE ROLE's INHERIT option,
inheritance handling, and grant's ability to change role options.
Discussion: https://postgr.es/m/Zab9GiV63EENDcWG@momjian.us
Co-authored-by: David G. Johnston
Backpatch-through: 16
The Parameters subsection had an extra TRIGGER in the grammar
for DISABLE/ENABLE which is incorrect. Backpatch down to all
supported versions since it's been like this all along.
Discussion: https://postgr.es/m/0AFB171E-7E78-4A90-A140-46AB270212CA@yesql.se
Backpatch-through: v12
The openssl command for displaying the DN of a client certificate was
using --subject and not the single-dash option -subject. While recent
versions of openssl handles double dash options, earlier does not so
fix by using just -subject (which is per the openssl documentation).
Backpatch to v14 where this was introduced.
Reported-by: konkove@gmail.com
Discussion: https://postgr.es/m/170672168899.666.10442618407194498217@wrigleys.postgresql.org
Backpatch-through: v14
This was already documented in the CREATE INDEX reference, but not in
the introductory "Data Definition" chapter. Also, document that the
index that implements a constraint has the same name as the
constraint.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxFG682tYcP9aH_F-jrqq5End8MHZR77zcp1%3DDUrEsSu1Q%40mail.gmail.com
This commit introduces a new subscription option named 'failover', which
provides users with the ability to set the failover property of the
replication slot on the publisher when creating or altering a
subscription.
This uses the replication commands introduced by commit 7329240437 to
enable the failover option for a logical replication slot.
If the failover option is set to true, the associated replication slots
(i.e. the main slot and the table sync slots) in the upstream database are
enabled to be synchronized to the standbys. Note that the capability to
sync the replication slots will be added in subsequent commits.
Thanks to Masahiko Sawada for the design inputs.
Author: Shveta Malik, Hou Zhijie, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
We seem to have only documented a foreign key can reference the columns of
a primary key or unique constraint. Here we adjust the documentation
to mention columns in a non-partial unique index can be mentioned too.
The header comment for transformFkeyCheckAttrs() also didn't mention
unique indexes, so fix that too. In passing make that header comment
reflect reality in the various other aspects where it deviated from it.
Bug: 18295
Reported-by: Gilles PARC
Author: Laurenz Albe, David Rowley
Discussion: https://www.postgresql.org/message-id/18295-0ed0fac5c9f7b17b%40postgresql.org
Backpatch-through: 12
This adds a new "Memory:" line under the "Planning:" group (which
currently only has "Buffers:") when the MEMORY option is specified.
In order to make the reporting reasonably accurate, we create a separate
memory context for planner activities, to be used only when this option
is given. The total amount of memory allocated by that context is
reported as "allocated"; we subtract memory in the context's freelists
from that and report that result as "used". We use
MemoryContextStatsInternal() to obtain the quantities.
The code structure to show buffer usage during planning was not in
amazing shape, so I (Álvaro) modified the patch a bit to clean that up
in passing.
Author: Ashutosh Bapat
Reviewed-by: David Rowley, Andrey Lepikhov, Jian He, Andy Fan
Discussion: https://www.postgresql.org/message-id/CAExHW5sZA=5LJ_ZPpRO-w09ck8z9p7eaYAqq3Ks9GDfhrxeWBw@mail.gmail.com
This function served to support having prebuilt files in the source
tree for vpath builds. This is no longer possible (since
721856ff24); all built files are now always in the build tree. The
invocations of this function are no longer required.
This commit implements a new replication command called
ALTER_REPLICATION_SLOT and a corresponding walreceiver API function named
walrcv_alter_slot. Additionally, the CREATE_REPLICATION_SLOT command has
been extended to support the failover option.
These new additions allow the modification of the failover property of a
replication slot on the publisher. A subsequent commit will make use of
these commands in subscription commands and will add the tests as well to
cover the functionality added/changed by this commit.
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Formerly, these were only supported in to_char(), but there seems
little reason for that restriction. We should at least have enough
support to permit round-tripping the output of to_char().
In that spirit, TZ accepts either zone abbreviations or numeric
(HH or HH:MM) offsets, which are the cases that to_char() can output.
In an ideal world we'd make it take full zone names too, but
that seems like it'd introduce an unreasonable amount of ambiguity,
since the rules for POSIX-spec zone names are so lax.
OF is a subset of this, accepting only HH or HH:MM.
One small benefit of this improvement is that we can simplify
jsonpath's executeDateTimeMethod function, which no longer needs
to consider the HH and HH:MM cases separately. Moreover, letting
it accept zone abbreviations means it will accept "Z" to mean UTC,
which is emitted by JSON.stringify() for example.
Patch by me, reviewed by Aleksander Alekseev and Daniel Gustafsson
Discussion: https://postgr.es/m/1681086.1686673242@sss.pgh.pa.us
Clarify the behavior of jsonpath operators and functions by
describing their two different modes of operation explicitly.
In addition to the SQL-spec behavior, where a path returns
a list of matching items, we have a "predicate check" form
that always returns a single boolean result. That was mentioned
in only one place, but it seems better to annotate each operator
and function as to which form(s) it takes. Also improve the
examples by converting them into actual executable SQL with
results, and do a bunch of incidental wordsmithing.
David Wheeler, reviewed by Erik Wienhold, Jian He, and myself
Discussion: https://postgr.es/m/7262A188-59CA-4A8A-AAD7-83D4FF0B9758@justatheory.com
This commit implements ithe jsonpath .bigint(), .boolean(),
.date(), .decimal([precision [, scale]]), .integer(), .number(),
.string(), .time(), .time_tz(), .timestamp(), and .timestamp_tz()
methods.
.bigint() converts the given JSON string or a numeric value to
the bigint type representation.
.boolean() converts the given JSON string, numeric, or boolean
value to the boolean type representation. In the numeric case, only
integers are allowed. We use the parse_bool() backend function
to convert a string to a bool.
.decimal([precision [, scale]]) converts the given JSON string
or a numeric value to the numeric type representation. If precision
and scale are provided for .decimal(), then it is converted to the
equivalent numeric typmod and applied to the numeric number.
.integer() and .number() convert the given JSON string or a
numeric value to the int4 and numeric type representation.
.string() uses the datatype's output function to convert numeric
and various date/time types to the string representation.
The JSON string representing a valid date/time is converted to the
specific date or time type representation using jsonpath .date(),
.time(), .time_tz(), .timestamp(), .timestamp_tz() methods. The
changes use the infrastructure of the .datetime() method and perform
the datatype conversion as appropriate. Unlike the .datetime()
method, none of these methods accept a format template and use ISO
DateTime format instead. However, except for .date(), the
date/time related methods take an optional precision to adjust the
fractional seconds.
Jeevan Chalke, reviewed by Peter Eisentraut and Andrew Dunstan.
This commit adds the failover property to the replication slot. The
failover property indicates whether the slot will be synced to the standby
servers, enabling the resumption of corresponding logical replication
after failover. But note that this commit does not yet include the
capability to sync the replication slot; the subsequent commits will add
that capability.
A new optional parameter 'failover' is added to the
pg_create_logical_replication_slot() function. We will also enable to set
'failover' option for slots via the subscription commands in the
subsequent commits.
The value of the 'failover' flag is displayed as part of
pg_replication_slots view.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
9e2d870119 enabled the COPY command to skip malformed data, however
there was no visibility into how many tuples were actually skipped
during the COPY FROM.
This commit adds a new "tuples_skipped" column to
pg_stat_progress_copy view to report the number of tuples that were
skipped because they contain malformed data.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/d12fd8c99adcae2744212cb23feff6ed%40oss.nttdata.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This change adds a new meta-command called \syncpipeline to pgbench,
able to send a sync message without flushing using the new libpq
function PQsendPipelineSync().
This meta-command is available within a block made of \startpipeline and
\endpipeline.
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAO6_XqpcNhW6LZHLF-2NpPzdTbyMm4-RVkr3+AP5cOKSm9hrWA@mail.gmail.com
This adds a Node *escontext parameter to it and a bunch of functions
downstream to it, replacing any ereport()s in that path by either
errsave() or ereturn() as appropriate. This also adds code to those
functions where necessary to return early upon encountering a soft
error.
The changes here are mainly intended to suppress errors in the
functions of jsonfuncs.c. Functions in any external modules, such as
arrayfuncs.c, that those functions may in turn call are not changed
here based on the assumption that the various checks in jsonfuncs.c
functions should ensure that only values that are structurally valid
get passed to the functions in those external modules. An exception
is made for domain_check() to allow handling domain constraint
violation errors softly.
For testing, this adds a function jsonb_populate_record_valid(),
which returns true if jsonb_populate_record() would finish without
causing an error for the provided JSON object, false otherwise. Note
that jsonb_populate_record() internally calls populate_record(),
which in turn uses populate_record_field().
Extracted from a much larger patch to add SQL/JSON query functions.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund,
Alexander Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers,
Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby,
Álvaro Herrera, Jian He, Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
AM was used throughout the documentation to denote Access Method, but
the acronym was not described. This adds an acronym entry as well as
a glossary term which the acronym links to. Each page which describe
AMs have the first occurrence with <acronym> markup.
Reported-by: alaa.attya91@gmail.com
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/169974408805.398198.6927340566912872957@wrigleys.postgresql.org
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Presently, the most straightforward way for a shared library to use
shared memory is to request it at server startup via a
shmem_request_hook, which requires specifying the library in
shared_preload_libraries. Alternatively, the library can create a
dynamic shared memory (DSM) segment, but absent a shared location
to store the segment's handle, other backends cannot use it. This
commit introduces a registry for DSM segments so that these other
backends can look up existing segments with a library-specified
string. This allows libraries to easily use shared memory without
needing to request it at server startup.
The registry is accessed via the new GetNamedDSMSegment() function.
This function handles allocating the segment and initializing it
via a provided callback. If another backend already created and
initialized the segment, it simply attaches the segment.
GetNamedDSMSegment() locks the registry appropriately to ensure
that only one backend initializes the segment and that all other
backends just attach it.
The registry itself is comprised of a dshash table that stores the
DSM segment handles keyed by a library-specified string.
Reviewed-by: Michael Paquier, Andrei Lepikhov, Nikita Malakhov, Robert Haas, Bharath Rupireddy, Zhang Mingli, Amul Sul
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Presently, this section meanders through a few different features,
and the text itself is terse. This commit attempts to improve
matters by splitting the section into smaller sections and by
expanding the text for clarity. This is preparatory work for a
follow-up commit that will introduce a way for libraries to use
shared memory without needing to request it at startup time.
Reviewed-by: Aleksander Alekseev, Bharath Rupireddy, Abhijit Menon-Sen
Discussion: https://postgr.es/m/20240112041430.GA3557928%40nathanxps13
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This commit adds some notes about the inability to remove superuser
privileges from the bootstrap superuser. This has been blocked
since commit e530be2c5c, but it wasn't intended be a supported
feature before that, either.
In passing, change "bootstrap user" to "bootstrap superuser" in a
couple places.
Author: Yurii Rashkovskii
Reviewed-by: Vignesh C, David G. Johnston
Discussion: https://postgr.es/m/CA%2BRLCQzSx_eTC2Fch0EzeNHD3zFUcPvBYOoB%2BpPScFLch1DEQw%40mail.gmail.com
Currently, when source data contains unexpected data regarding data type or
range, the entire COPY fails. However, in some cases, such data can be ignored
and just copying normal data is preferable.
This commit adds a new option SAVE_ERROR_TO, which specifies where to save the
error information. When this option is specified, COPY skips soft errors and
continues copying.
Currently, SAVE_ERROR_TO only supports "none". This indicates error information
is not saved and COPY just skips the unexpected data and continues running.
Later works are expected to add more choices, such as 'log' and 'table'.
Author: Damir Belyalov, Atsushi Torikoshi, Alex Shulgin, Jian He
Discussion: https://postgr.es/m/87k31ftoe0.fsf_-_%40commandprompt.com
Reviewed-by: Pavel Stehule, Andres Freund, Tom Lane, Daniel Gustafsson,
Reviewed-by: Alena Rybakina, Andy Fan, Andrei Lepikhov, Masahiko Sawada
Reviewed-by: Vignesh C, Atsushi Torikoshi
Previously, identity columns were disallowed on partitioned tables.
(The reason was mainly that no one had gotten around to working
through all the details to make it work.) This makes it work now.
Some details on the behavior:
* A newly created partition inherits identity property
The partitions of a partitioned table are integral part of the
partitioned table. A partition inherits identity columns from the
partitioned table. An identity column of a partition shares the
identity space with the corresponding column of the partitioned
table. In other words, the same identity column across all
partitions of a partitioned table share the same identity space.
This is effected by sharing the same underlying sequence.
When INSERTing directly into a partition, the sequence associated
with the topmost partitioned table is used to calculate the value of
the corresponding identity column.
In regular inheritance, identity columns and their properties in a
child table are independent of those in its parent tables. A child
table does not inherit identity columns or their properties
automatically from the parent. (This is unchanged.)
* Attached partition inherits identity column
A table being attached as a partition inherits the identity property
from the partitioned table. This should be fine since we expect
that the partition table's column has the same type as the
partitioned table's corresponding column. If the table being
attached is a partitioned table, the identity properties are
propagated down its partition hierarchy.
An identity column in the partitioned table is also marked as NOT
NULL. The corresponding column in the partition needs to be marked
as NOT NULL for the attach to succeed.
* Drop identity property when detaching partition
A partition's identity column shares the identity space
(i.e. underlying sequence) as the corresponding column of the
partitioned table. If a partition is detached it can longer share
the identity space as before. Hence the identity columns of the
partition being detached loose their identity property.
When identity of a column of a regular table is dropped it retains
the NOT NULL constraint that came with the identity property.
Similarly the columns of the partition being detached retain the NOT
NULL constraints that came with identity property, even though the
identity property itself is lost.
The sequence associated with the identity property is linked to the
partitioned table (and not the partition being detached). That
sequence is not dropped as part of detach operation.
* Partitions with their own identity columns are not allowed.
* The usual ALTER operations (add identity column, add identity
property to existing column, alter properties of an indentity
column, drop identity property) are supported for partitioned
tables. Changing a column only in a partitioned table or a
partition is not allowed; the change needs to be applied to the
whole partition hierarchy.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
One instance of "WITH clause" was not using <literal> tags around
WITH, while others were, so add markup to the last one to ensure
consistency. Backpatch to v15 where MERGE was added.
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxGJKY9ZCPV2WDM6xFsXq9C8r7r3vU6AkScN+p9k6CEpMw@mail.gmail.com
Backpatch-through: v15
This seems to be missing since identity column support was added. Add
the same. This gives a place to document various pieces of
information in one place that are currently distributed over several
command reference pages or just not documented (e.g., inheritance
behavior).
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
This new function is equivalent to PQpipelineSync(), except that it does
not flush anything to the server except if the size threshold of the
output buffer is reached; the user must subsequently call PQflush()
instead.
Its purpose is to reduce the system call overhead of pipeline mode, by
giving to applications more control over the timing of the flushes when
manipulating commands in pipeline mode.
Author: Anton Kirilov
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Álvaro Herrera, Denis
Laxalde, Michael Paquier
Discussion: https://postgr.es/m/CACV6eE5arHFZEA717=iKEa_OewpVFfWJOmsOdGrqqsr8CJVfWQ@mail.gmail.com
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
This can dump the contents of the WAL summary files found in
pg_wal/summaries. Normally, this shouldn't really be something anyone
needs to do, but it may be needed for debugging problems with
incremental backup, or could possibly be useful to external tools.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
This makes it possible to access information about the progress
of WAL summarization from SQL. The previously-added functions
pg_available_wal_summaries() and pg_wal_summary_contents() only
examine on-disk state, but this function exposes information from
the server's shared memory.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
UNIQUE and PRIMARY KEY constraints can be created on ONLY the
partitioned table. We already had an example demonstrating that,
but forgot to mention it in the documentation of the limits of
partitioning.
Author: Laurenz Albe
Reviewed-By: shihao zhong, Shubham Khanna, Ashutosh Bapat
Backpatch-through: 12
Discussion: https://postgr.es/m/167299368731.659.16130012959616771853@wrigleys.postgresql.org
The documentation for this parameter lists its type as boolean, but
it is actually an integer. Furthermore, there is no mention of how
the value is interpreted when specified without units. This commit
fixes these oversights in commit 174c480508.
Co-authored-by: Hubert Depesz Lubaczewski
Discussion: https://postgr.es/m/ZZwkujFihO2uqKwp%40depesz.com
Essentially this moves the non-interactive part of psql's "\password"
command into an exported client function. The password is not sent to the
server in cleartext because it is "encrypted" (in the case of scram and md5
it is actually hashed, but we have called these encrypted passwords for a
long time now) on the client side. This is good because it ensures the
cleartext password is never known by the server, and therefore won't end up
in logs, pg_stat displays, etc.
In other words, it exists for the same reason as PQencryptPasswordConn(), but
is more convenient as it both builds and runs the "ALTER USER" command for
you. PQchangePassword() uses PQencryptPasswordConn() to do the password
encryption. PQencryptPasswordConn() is passed a NULL for the algorithm
argument, hence encryption is done according to the server's
password_encryption setting.
Also modify the psql client to use the new function. That provides a builtin
test case. Ultimately drivers built on top of libpq should expose this
function and its use should be generally encouraged over doing ALTER USER
directly for password changes.
Author: Joe Conway
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/flat/b75955f7-e8cc-4bbd-817f-ef536bacbe93%40joeconway.com
The note regarding character encoding form in "The Information Schema"
said that LATIN1 character repertoires only use one encoding form
LATIN1. This is not correct because LATIN1 has another encoding form
ISO-2022-JP-2. To fix this, replace LATIN1 with LATIN2, which is not
supported by ISO-2022-JP-2, thus it can be said that LATIN2 only uses
one encoding form.
Back-patch to supported branches.
Author: Tatsuo Ishii
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/flat/20240102.153925.1147403616414525145.t-ishii%40sranhm.sra.co.jp
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these. Use them in postgres_fdw,
replacing a local implementation from which the libpqsrv implementation
derives. This is a bug fix for dblink. Code inspection identified the
bug at least thirteen years ago, but user complaints have not appeared.
Hence, no back-patch for now.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
This patch changes the existing 'conflicting' field to 'conflict_reason'
in pg_replication_slots. This new field indicates the reason for the
logical slot's conflict with recovery. It is always NULL for physical
slots, as well as for logical slots which are not invalidated. The
non-NULL values indicate that the slot is marked as invalidated. Possible
values are:
wal_removed = required WAL has been removed.
rows_removed = required rows have been removed.
wal_level_insufficient = the primary doesn't have a wal_level sufficient
to perform logical decoding.
The existing users of 'conflicting' column can get the same answer by
using 'conflict_reason' IS NOT NULL.
Author: Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/ZYOE8IguqTbp-seF@paquier.xyz
The "vertexes" spelling is also valid, but we consistently use
"vertices" elsewhere.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Shubham Khanna
Discussion: https://postgr.es/m/87le9fmi01.fsf@wibble.ilmari.org
This reverts commit 283a95da92.
The reordering of JsonPathItemType affects the binary on-disk
compatibility of the jsonpath type, so we must not change it. Revert
for now and consider.
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
The documentation has been missing one value in the list of catalog OIDs
that can be given to the validator function of a FDW, as of
AttributeRelationId, when changing the attribute options of a foreign
table.
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=i16t2yJU_Pq2Z+hnNGWFhagp_bJmzxHZu3ZkOjZm-+rQ@mail.gmail.com
Backpatch-through: 12
Daniel Gustafsson
Peter Eisentraut
Amit Kapila
Alexander Korotkov
Nathan Bossart
Tom Lane
Robert Haas
Amit Langote
Alvaro Herrera
Dean Rasheed
Jeff Davis
Bruce Momjian
Michael Paquier
Thomas Munro
Heikki Linnakangas
Andrew Dunstan
David Rowley
Masahiko Sawada
Magnus Hagander
John Naylor
Joe Conway
Tatsuo Ishii
Noah Misch