After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
The pgindent part of this is pretty small, consisting mainly of
fixing up self-inflicted formatting damage from patches that
hadn't bothered to add their new typedefs to typedefs.list.
In order to keep it from making anything worse, I manually added
a dozen or so typedefs that appeared in the existing typedefs.list
but not in the buildfarm's list. Perhaps we should formalize that,
or better find a way to get those typedefs into the automatic list.
pgperltidy is as opinionated as always, and reformat-dat-files too.
Commit 6bf5c42b55 cannot work on Windows,
because it lacks symlink support. While the bug fix in commit
cd64dc42d1 is correct as far as I know,
the test case changes depend on the previous commit, so this will
have to live without test coverage until we can come up with a better
solution. Commit fa7036dd66 was a test
case bug fix on top of those two, to prevent failures on Linux, so that
has to come out as well.
Per the buildfarm, CI, and Thomas Munro.
This commit doesn't use this infrastructure for anything new, although
it does adapt 010_pg_basebackup.pl to use it. However, a future commit
will use this to improve test coverage for pg_combinebackup.
Patch by me, reviewed (but not fully endorsed) by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoYdXTjo9iQeoipTccDpWZzvBNS6EndY2uARM+T4yG_yDg@mail.gmail.com
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
Various error paths did not release resources before returning.
While it's likely that the program would just exit shortly later,
none of the functions in question have summary exit(1) calls,
so they should not be assuming that.
Ranier Vilela and Tom Lane, per reports from Coverity
Discussion: https://postgr.es/m/CAEudQAr2_SZFxB4kXJiL4+2UaNZxUk5UBJtj0oXyJYMGZu-03g@mail.gmail.com
It must be run on the target server and should be able to connect to
the source server (publisher) and the target server (subscriber). All
tables in the specified database(s) are included in the logical
replication setup. A pair of publication and subscription objects are
created for each database.
The main advantage of pg_createsubscriber over the common logical
replication setup is the initial data copy. It also reduces the
catchup phase.
Some prerequisites must be met to successfully run it. It is
basically the logical replication requirements. It starts creating a
publication using FOR ALL TABLES and a replication slot for each
specified database. Write recovery parameters into the target data
directory and start the target server. It specifies the LSN of the
last replication slot (replication start point) up to which the
recovery will proceed. Wait until the target server is promoted.
Create one subscription per specified database (using publication and
replication slot created in a previous step) on the target server.
Set the replication progress to the replication start point for each
subscription. Enable the subscription for each specified database on
the target server. And finally, change the system identifier on the
target server.
Author: Euler Taveira <euler.taveira@enterprisedb.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/5ac50071-f2ed-4ace-a8fd-b892cffd33eb@www.fastmail.com
It wasn't getting freed in one code path, which Coverity identified as
a resource leak. It's probably of little consequence, but re-ordering
the code into the correct sequence is no more work than dismissing the
complaint. Minor oversight in commit a145f424d.
While here, improve the unreasonably clunky coding of
FindDbnameInConnParams: use of an output parameter is unnecessary
and prone to uninitialized-variable problems.
Commit cca97ce6a6 allowed dbname in pg_basebackup connstring and in this
commit we allow it to be written in postgresql.auto.conf when -R option is
used. The database name in the connection string will be used by the
logical replication slot synchronization on standby.
The dbname will be recorded only if specified explicitly in the connection
string or environment variable.
Masahiko Sawada hasn't reviewed the code in detail but endorsed the idea.
Author: Vignesh C, Kuroda Hayato
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAB8KJ=hdKdg+UeXhReeHpHA6N6v3e0qFF+ZsPFHk9_ThWKf=2A@mail.gmail.com
This checks that certain I/O-related Perl functions properly check
their return value. Some parts of the PostgreSQL code had been a bit
sloppy about that. The new perlcritic warnings are fixed here. I
didn't design any beautiful error messages, mostly just used "or die
$!", which mostly matches existing code, and also this is
developer-level code, so having the system error plus source code
reference should be ok.
Initially, we only activate this check for a subset of what the
perlcritic check would warn about. The effective list is
chmod flock open read rename seek symlink system
The initial set of functions is picked because most existing code
already checked the return value of those, so any omissions are
probably unintended, or because it seems important for test
correctness.
The actual perlcritic configuration is written as an exclude list.
That seems better so that we are clear on what we are currently not
checking. Maybe future patches want to investigate checking some of
the other functions. (In principle, we might eventually want to check
all of them, but since this is test and build support code, not
production code, there are probably some reasonable compromises to be
made.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/88b7d4f2-46d9-4cc7-b1f7-613c90f9a76a%40eisentraut.org
Before this patch, if you took a full backup on server A and then
tried to use the backup manifest to take an incremental backup on
server B, it wouldn't know that the manifest was from a different
server and so the incremental backup operation could potentially
complete without error. When you later tried to run pg_combinebackup,
you'd find out that your incremental backup was and always had been
invalid. That's poor timing, because nobody likes finding out about
backup problems only at restore time.
With this patch, you'll get an error when trying to take the (invalid)
incremental backup, which seems a lot nicer.
Amul Sul, revised by me. Review by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYLZzbSAMM3cAjV4Y+iCRZn-bR9H2+Mdz7NdaJFU1Zb5w@mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
The macOS Finder application creates .DS_Store files in directories
when opened, which creates problems for serverside utilities which
expect all files to be PostgreSQL specific files. Skip these files
when encountered in pg_checksums, pg_rewind and pg_basebackup.
This was extracted from a larger patchset for skipping hidden files
and system files, where the concencus was to just skip these. Since
this is equally likely to happen in every version, backpatch to all
supported versions.
Reported-by: Mark Guertin <markguertin@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tobias Bussmann <t.bussmann@gmx.net>
Discussion: https://postgr.es/m/E258CE50-AB0E-455D-8AAD-BB4FE8F882FB@gmail.com
Backpatch-through: v12
MINIMUM_VERSION_FOR_WAL_SUMMARIES is used to check if the directory
pg_wal/summaries/ should be created in a base backup, but its condition
was reversed: pg_wal/summaries/ would be created when taking base
backups from backends of v16 and older versions, but it should be
created in base backups taken from backends of v17 and newer versions.
Author: Artur Zakirov
Reviewed-by: Yugo Nagata, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/CAKNkYnzkkQ0gb_ZmLTY0r2-qV1q6imXgcCWxdA6UoA6yJkujGg@mail.gmail.com
pg_combinebackup had various problems:
* strncpy was used in various places where strlcpy should be used
instead, to avoid any possibility of the result not being
\0-terminated.
* scan_for_existing_tablespaces() failed to close the directory,
and an error when opening the directory was reported with the
wrong pathname.
* write_reconstructed_file() contained some redundant and therefore
dead code.
* flush_manifest() didn't check the result of pg_checksum_update()
as we do in other places, and misused a local pathname variable
that shouldn't exist at all.
In pg_basebackup, the wrong variable name was used in one place,
due to a copy and paste that was not properly adjusted.
In blkreftable.c, the loop incorrectly doubled chunkno instead of
max_chunks. Fix that. Also remove a nearby assertion per repeated
off-list complaints from Tom Lane.
Per Coverity and subsequent code inspection by me and by Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
This commit removes all the scripts located in src/tools/msvc/ to build
PostgreSQL with Visual Studio on Windows, meson becoming the recommended
way to achieve that. The scripts held some information that is still
relevant with meson, information kept and moved to better locations.
Comments that referred directly to the scripts are removed.
All the documentation still relevant that was in install-windows.sgml
has been moved to installation.sgml under a new subsection for Visual.
All the content specific to the scripts is removed. Some adjustments
for the documentation are planned in a follow-up set of changes.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://postgr.es/m/ZQzp_VMJcerM1Cs_@paquier.xyz
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
As physical replication work at the cluster level and not database
level, any dbname in the connection string is ignored. Proxies and
middleware used in connecting to the cluster might however need to
know the dbname in order to make the correct routing decision for
the connection.
With this the startup packet will include the dbname parameter.
Author: Jelte Fennema-Nio <me@jeltef.nl>
Reviewed-by: Tristen Raab <tristen.raab@highgo.ca>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CAGECzQTw-dZkVT_RELRzfWRzY714-VaTjoBATYfZq93R8C-auA@mail.gmail.com
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
If we define ZLIB_CONST before including zlib.h, zlib augments some
interfaces with const decorations. By doing that we can keep our own
interfaces cleaner and can remove some unconstify calls.
ZLIB_CONST was introduced in zlib 1.2.5.2 (17 Dec 2011). When
compiling with older zlib releases, you might now get compiler
warnings about discarding qualifiers.
CentOS 6 has zlib 1.2.3, but in 8e278b6576, we removed support for the
OpenSSL release in CentOS 6, so it seems ok to de-support the zlib
release in CentOS 6 as well.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/33462926-bb1e-7cc9-8d92-d86318e8ed1d%40eisentraut.org
When pg_recvlogical needs to abort on a signal like SIGINT/SIGTERM, it
is expected to exit cleanly as the code documents. However, the code
forgot to clean up the state of the connection before leaving. This
would cause the tool to emit messages like "unexpected termination of
replication stream" error, which is meant for really unexpected
termination or a crash.
The code is refactored to apply the same termination abort operations for
signals, end LSN and keepalive cases, registering a "reason" for the
termination with a message printed under --verbose adapted to the reason
used.
This is arguably a bug, but this has been this way since the tool exists
and the signal termination can now become slower depending on the change
being decoded when the signal is received.
Reported-by: Andres Freund
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Cary Huang, Michael
Paquier
Discussion: https://postgr.es/m/20221019213953.htdtzikf4f45ywil@awork3.anarazel.de
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
Peter Eisentraut
Tom Lane
Robert Haas
Daniel Gustafsson
Amit Kapila
Heikki Linnakangas
Michael Paquier
Magnus Hagander
Bruce Momjian
Nathan Bossart
Andrew Dunstan
Masahiko Sawada
David Rowley