$(CC) $(CFLAGS) $(LDFLAGS) <object files> <extra-libraries> $(LIBS) -o $@
This form seemed to be the most portable, readable, and logical, but in any
case it's better than having a dozen different ones in the tree.
but take it as 'int *' instead.
Add real test for whether ld -R works on Unixware.
Rename --enable-uniconv to --enable-unicode-conversion.
Install shlibs mode 755 by default, since 644 causes gratuitous complaints
from ldd et al. on some systems.
that installs into a different path than is configured.
With this applied both postmaster and the shared libs are location
independent
for AIX 4.2 and up.
Thanks
Andreas
Bruce Hartzler <bruceh@mail.utexas.edu>. It contains shared library
support, regression test map, and the usual template files. The dynamic
loader is missing, the spin lock code apparently doesn't assemble due to
syntax problems, and semaphores are to be hoped for from Apple.
path into executables and shared libraries (-rpath or -R for most). Can be
disabled with --disable-rpath, since some binary packaging standards do not
like this option.
particular, allow linking with arbitrary commands rather than only $(AR) or
$(LD), and treat C++ without hacks.
Add option to disable shared libraries. This takes the place of the
BSD_SHLIB variable. The regression test driver ignores the plpgsql test
if there are no shared libraries available.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
Makefile.port, since they are of no use to configure and much of the
library magic happens in Makefile.port anyway.
Use __alpha, not __alpha__, since the former is universally available.
Remove -DNOFIXADE from the compile command line and put it in the port
include file.
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
and the fmgr redesign.
It makes the homebrewn dl*() functions for more recent Versions of AIX
obsolete
by using the system dl*() functions instead.
It also fixes the expected file for the horology regression test.
Please regenerate configure from configure.in, I don't have the
environment/time.
Andreas
Update the installation instructions (formerly misnamed "FAQ"), add configure
checks for some headers rather than having users copy stubs manually (ugh!).
Use Autoconf check for exe extension. This also avoids inheriting the value
of $(X) from the environment.
Interfaced a lot of the custom tests to the config.cache, in the process
made them separate macros and grouped them out into files. Made naming
adjustments.
Removed a couple of useless/unused configure tests.
Disabled C++ by default. C++ is no more special than Perl, Python, and Tcl.
And it breaks equally often. :(
It does work with the following patch applied and gcc 2.95.2 .
Use --with-template=aix_gcc to compile the whole lot with gcc.
The geometry regression test produces different precision.
With optimization I run into regression failures starting at oidjoins,
thus no -O2. Anybody else try gcc 2.95.2 and -O2 on beta4 ?
This is an important patch, since recent versions of the IBM compiler
are not for free, and thus most questions I get concern gcc.
Andreas
PS.: I am testing with beta4
1) adds NetBSD shared lib support on both ELF and a.out platforms
2) replaces "-L$(LIBPQDIR) -lpq" with "$(LIBPQ)" defined in
Makefile.global. This makes it much easier to build stuff in
the source tree after you've already installed the libraries.
3) adds TEMPLATEDIR in Makefile.global that indicates where the
database templates are stored. This separates the template files
from real libraries that are installed in $(LIBDIR).
4) changes include order of <readline/readline.h> and <readline.h>.
The latest GNU readline installs its headers under a readline
subdirectory.
In addition to applying the patch below the following files need to be copied:
backend/port/dynloader:
bsd.h -> netbsd.h
bsd.c -> netbsd.c
include/port:
bsd.h -> netbsd.h
makefiles:
Makefile.bsd -> Makefile.netbsd
It would be great to see this incorporated into the source tree before
the 7.0 release is cut.
Thanks!
-- Johnny C. Lam <lamj@stat.cmu.edu>
NetBSD/macppc
LinuxPPC
FreeBSD 2.2.6-RELEASE
All of them seem happy with the regression test. Note that, however,
compiling with optimization enabled on NetBSD/macppc causes an initdb
failure (other two platforms are ok). After checking the asm code, we
are suspecting that might be a compiler(egcs) bug.
Tatsuo Ishii
instead of relying on port's os.h to tell us. (Needed for HPUX
where system major version is not enough info.)
configure unsets USE_TK if X libraries not found.
doc/Makefile uses gzcat or zcat as found by autoconf.
From: SHIOZAKI Takehiko <takehi-s@ascii.co.jp>
I tried snapshot(Oct30) and made some patches.
# I think that it is confused to manage both Makefile.shlib and
# makefiles/Makefile.*, don't you?
* configure
Now FreeBSD 2.X is not supported..., so I added its entry.
If ELF_SYSTEM is set, gmake treat it defined even though
it is "false". So nothing should be set to use "ifdef".
BSD_SHLIB etc. may have same problems.
* Makefile.shlib
As you said, FreeBSD entry is much like BSD's.
I only added ELF_SYSTEM code.
* makefiles/Makefile.freebsd
Ifdef/else/endif can not be indented with TABs.
6.3.2 to compile (and run) on my Sparc Solaris 2.5.1 box. Details
below:
pgsql.sparc.patch-template: Adds -D__sparc__ and -D__sun__,
defintions which gcc does define, but Sun's cc does not. :(
pgsql.sparc.patch-makefile: Adds a define so that 'lorder'
is not used, as it is not found on my machine.
Ryan Kirkpatrick
in a more readable form. -- I am submitting the following patches
to the June 6, 1998 snapshot of PostgreSQL. These patches implement
a port of PostgreSQL to SCO UnixWare 7, and updates the Univel port
(UnixWare 2.x). The patched files, and the reason
for the patch are:
File Reason for the patch ---------------
---------------------------------------------------------------
src/backend/port/dynloader/unixware.c src/backend/port/dynloader/unixware.h
src/include/port/unixware.h src/makefiles/Makefile.unixware
src/template/unixware
Created for the UNIXWARE port.
src/include/port/univel.h
Modifed this file to work with the changes made to
s_lock.[ch].
src/backend/storage/buffer/s_lock.c src/include/storage/s_lock.h
Moved the UNIXWARE (and Univel) tas() function from
s_lock.c to s_lock.h. The UnixWare compiler asm
construct is treated as a macro and needs to be in
the s_lock.h file. I also reworked the tas()
function to correct some errors in the code.
src/include/version.h.in
The use of the ## operator with quoted strings in
the VERSION macro caused problems with the UnixWare
C compiler. I removed the ## operators since they
were not needed in this case. The macro expands
into a sequence of quoted strings that will be
concatenated by any ANSI C compiler.
src/config.guess
This script was modified to recognize SCO UnixWare
7.
src/configure src/configure.in
The configure script was modified to recognize SCO
UnixWare 7.
Billy G. Allie
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
This patch will...
1. Remove the "-Wall" option from the ecpg/lib and ecpg/preproc Makefile.
2. Remove the addition of $(SRCDIR)/include and-or $(SRCDIR)/backend from
ecpg/lib, ecpg/preproc, libpq and utils Makefiles. Already in CFLAGS...
3. Set MK_NO_LORDER and RANLIB in Makefile.aix to avoid a couple of extra
steps taken care of by the 'ld' command anyways.
compiler define that should have been enabled, but was not due to
different naming conventions for Linux/Alpha. Attached is the patch he
sent me, that I have not had a chance to test yet.
From: Ryan Kirkpatrick <rkirkpat@nag.cs.colorado.edu>
The attached patches will allow postgreSQL to compile successfully on SCO
UNIXWARE 2.1.x. The patches fix the following problems:
1. Configure did not properly recognize the UNIXWARE system as needing the
univel port. It used the sys4 port.
2. Configure did not properly process the CC flag in the template file.
3. There was no working test and set locking implementation for the native
UNIXWARE compiler.
4. The test and set locking used for Intel X86 that was selected by defining
NEED_I386_TAS_ASM could fail in a multi-processor environment.
5. The makefiles for libpq and libpgtcl did not make a shared library for
the univel port.
Subject: [PATCHES] port patch: ultrix4
ultrix4 doesn't compile without this. this also fixes a problem
with dynamic loading (ultrix relocatable objects must be loaded
with -G 0).
Makefile.global and move them to seperate 'include' makefiles
Over time, should become even more port specific:
ie. Makefile.BSD44_derived should be broken down into netbsd/freebsd
specific ports
Peter Eisentraut
Tatsuo Ishii
Bruce Momjian
Tom Lane
Marc G. Fournier
Thomas G. Lockhart