In the libpq encryption negotiation tests, don't run the GSSAPI tests
unless PG_TEST_EXTRA='kerberos' is also set. That makes it possible to
still run most of the tests when GSSAPI support is compiled in, but
there's no MIT Kerberos installation.
The test targets libpq's options, so 'src/test/interfaces/libpq/t' is
a more natural place for it.
While doing this, I noticed that I had missed adding the
libpq_encryption subdir to the Makefile. That's why this commit only
needs to remove it from the meson.build file.
Per Peter Eisentraut's suggestion.
Discussion: https://www.postgresql.org/message-id/09d4bf5d-d0fa-4c66-a1d7-5ec757609646@eisentraut.org
It correctly skipped tests involving SSL in the server when SSL
support was not compiled in, but even when SSL is not enabled in the
server and the connection is established without SSL, libpq behaves
differently in many of the test scenarios when libpq is compiled
without SSL support. For example, with sslmode=prefer, if libpq is
compiled with SSL support it will attempt to use SSL, but without SSL
support it will try authenticating in plaintext mode directly. The
expected test output didn't take that into account.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKG%2BHRTtB%2Bx%2BKKKj_cfX6sNhbeGuqmGxjGMwdVPG7YGFP8w@mail.gmail.com
Per gripes from Michael Paquier
Discussion: https://postgr.es/m/ZhTQ6_w1vwOhqTQI@paquier.xyz
Along the way, also clean up a handful of typos in 3311ea86ed and
ea7b4e9a2a, found by Alexander Lakhin, and a couple of stylistic
snafus noted by Daniel Westermann and Daniel Gustafsson.
Coverity complained about not freeing some memory associated with
incrementally parsing backup manifests. To fix that, provide and use a new
shutdown function for the JsonManifestParseIncrementalState object, in
line with a suggestion from Tom Lane.
While analysing the problem, I noticed a buglet in freeing memory for
incremental json lexers. To fix that remove a bogus condition on
freeing the memory allocated for them.
Ensure that when updating the catalog_xmin of the synced slots, it is
first written to disk before changing the in-memory value
(effective_catalog_xmin). This is to prevent a scenario where the
in-memory value change triggers a vacuum to remove catalog tuples before
the catalog_xmin is written to disk. In the event of a crash before the
catalog_xmin is persisted, we would not know that some required catalog
tuples have been removed and the synced slot would be invalidated.
Change the sanity check to ensure that remote_slot's confirmed_flush LSN
can't precede the local/synced slot during slot sync. Note that the
restart_lsn of the synced/local slot can be ahead of remote_slot. This can
happen when slot advancing machinery finds a running xacts record after
reaching the consistent state at a later point than the primary where it
serializes the snapshot and updates the restart_lsn.
Make the check to sync slots robust by allowing to sync only when the
confirmed_lsn, restart_lsn, or catalog_xmin of the remote slot is ahead of
the synced/local slot.
Reported-by: Amit Kapila and Shveta Malik
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot
Discussion: https://postgr.es/m/OS0PR01MB57162B67D3CB01B2756FBA6D94062@OS0PR01MB5716.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAJpy0uCSS5zmdyUXhvw41HSdTbRqX1hbYqkOfHNj7qQ+2zn0AQ@mail.gmail.com
b262ad440 added code to have the planner remove redundant IS NOT NULL
quals and eliminate needless scans for IS NULL quals on tables where the
qual's column has a NOT NULL constraint.
That commit failed to consider that an inheritance parent table could
have differing NOT NULL constraints between the parent and the child.
This caused issues as if we eliminated a qual on the parent, when
applying the quals to child tables in apply_child_basequals(), the qual
might not have been added to the parent's baserestrictinfo.
Here we fix this by not applying the optimization to remove redundant
quals to RelOptInfos belonging to inheritance parents and applying the
optimization again in apply_child_basequals(). Effectively, this means
that the parent and child are considered independently as the parent has
both an inh=true and inh=false RTE and we still apply the optimization
to the RelOptInfo corresponding to the inh=false RTE.
We're able to still apply the optimization in add_base_clause_to_rel()
for partitioned tables as the NULLability of partitions must match that
of their parent. And, if we ever expand restriction_is_always_false()
and restriction_is_always_true() to handle partition constraints then we
can apply the same logic as, even in multi-level partitioned tables,
there's no way to route values to a partition when the qual does not
match the partition qual of the partitioned table's parent partition.
The same is true for CHECK constraints as those must also match between
arent partitioned tables and their partitions.
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAMbWs4930gQSZmjR7aANzEapdy61gCg6z8dT-kAEYD0sYWKPdQ@mail.gmail.com
A pairing heap can perform the same operations as the binary heap +
index, with as good or better algorithmic complexity, and that's an
existing data structure so that we don't need to invent anything new
compared to v16. This commit makes the new binaryheap functionality
that was added in commits b840508644 and bcb14f4abc unnecessary, but
they will be reverted separately.
Remove the optimization to only build and maintain the heap when the
amount of memory used is close to the limit, becuase the bookkeeping
overhead with the pairing heap seems to be small enough that it
doesn't matter in practice.
Reported-by: Jeff Davis
Author: Heikki Linnakangas
Reviewed-by: Michael Paquier, Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/12747c15811d94efcc5cda72d6b35c80d7bf3443.camel%40j-davis.com
The user can set RELSEG_SIZE to a high number at compile time, so we
can't use it to control the size of an array on the stack: it could be
many gigabytes in size. On closer inspection, we don't really need that
intermediate array anyway. Let's just write directly into the output
array, and then perform the absolute->relative adjustment in place.
This fixes new code from commit dc21234005.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2B2hZ0sBztPW4mkLfng0qfkNtAHFUfxOMLizJ0BPmi5%2Bg%40mail.gmail.com
aa5edbe379 has tweaked _hash_freeovflpage() so as the write buffer's
LSN is updated only when necessary, when REGBUF_NO_CHANGE is not used.
The replay code was not consistent with that, causing the write buffer's
LSN to be updated and its page to be marked as dirty even if the buffer
was registered in a "clean" state. This was possible for the case of a
squeeze record when there are no tuples to add to the write buffer, for
(is_prim_bucket_same_wrt && !is_prev_bucket_same_wrt).
I have performed some validation of this commit with
wal_consistency_checking and a change in WAL that logs REGBUF_NO_CHANGE
to a new BKPIMAGE_*. Thanks to that, it is possible to know at replay
if a buffer was clean when it was registered, then cross-checked the LSN
of the "clean" page copy coming from WAL with the LSN of the block once
the record has been replayed. This eats one bit in bimg_info, which is
not acceptable to be integrated as-is, but it could become handy in the
future. I didn't spot other areas than the one fixed by this commit at
the extent of what the main regression test suite covers.
As this is an oversight in aa5edbe379, no backpatch is required.
Reported-by: Zubeyr Eryilmaz
Author: Hayato Kuroda
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/ZbyVVG_7eW3YD5-A@paquier.xyz
Up to now, read_sql_construct() has collected all the source text from
the statement or expression's initial token up to the character just
before the "until" token. It normally tries to strip trailing
whitespace from that, largely for neatness. If there was a "-- text"
comment after the expression, this resulted in removing the newline
that terminates the comment, which creates a hazard if we try to paste
the collected text into a larger SQL construct without inserting a
newline after it. In particular this caused our handling of CASE
constructs to fail if there's a comment after a WHEN expression.
Commit 4adead1d2 noticed a similar problem with cursor arguments,
and worked around it through the rather crude hack of suppressing
the whitespace-trimming behavior for those. Rather than do that
and leave the hazard open for future hackers to trip over, let's
fix it properly. pl_scanner.c already has enough infrastructure
to report the end location of the expression's last token, so
we can copy up to that location and never collect any trailing
whitespace or comment to begin with.
Erik Wienhold and Tom Lane, per report from Michal Bartak.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAAVzF_FjRoi8fOVuLCZhQJx6HATQ7MKm=aFOHWZODFnLmjX-xA@mail.gmail.com
The tools.ietf.org site has been decommissioned and replaced by a
number of sites serving various purposes. Links to RFCs and BCPs
are now 301 redirected to their new respective IETF sites. Since
this serves no purpose and only adds network overhead, update our
links to the new locations.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3C1CEA99-FCED-447D-9858-5A579B4C6687@yesql.se
Backpatch-through: v12
f587338dec has introduced in the test module injection_points a SQL
function called injection_points_set_local(), that can be used to make
all the injection points linked to the process where they are attached,
discarded automatically if any remain once the process exits.
e2e3b8ae9e has added a NO_INSTALLCHECK to the test module to prevent
the use of installcheck. Now that there is a way to make the test
concurrent-safe, let's use it and remove the installcheck restriction.
Concurrency issues could be easily reproduced by running in a tight
loop a command like this one, in src/test/modules/gin/ (hardcoding
pg_sleep() after attaching injection points enlarges the race window)
and a second test suite like contrib/btree_gin/:
make installcheck USE_MODULE_DB=1
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/ZhNG4Io9uYOgwv3F@paquier.xyz
Wait for the standby to catch up before syncing the slots with
pg_sync_replication_slots(), otherwise, the logical slot could be ahead
and the sync would fail.
The other way to fix the test is to change it to use slotsync worker and
poll for the sync to get finished but the current approach is better as
this is a predictable way to write the test.
Per buildfarm
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB571665359F2F5DCD3ADABC9F94002@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commit 72559438 started copying more attributes from AttributeTemplate
to the functions we generate on the fly. In the case of deform
functions, which return void, this meant that "noundef", from
AttributeTemplate's return value (a Datum) was copied to a void type.
Older LLVM releases were OK with that, but LLVM 18 crashes.
Update our llvm_copy_attributes() function to skip copying the attribute
for the return value, if the target function returns void.
Thanks to Dmitry Dolgov for help chasing this down.
Back-patch to all supported releases, like 72559438.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRACpVFr7LMdVYENUkScG5FCYMZDDdSGNU-tch%2Bw98OxYg%40mail.gmail.com
This adjusts various appendStringInfo* function calls to use a more
appropriate and efficient function with the same behavior. For example,
use appendStringInfoChar() when appending a single character rather than
appendStringInfo() and appendStringInfoString() when no formatting is
required rather than using appendStringInfo().
All adjustments made here are in code that's new to v17, so it makes
sense to fix these now rather than wait a few years and make
backpatching harder.
Discussion: https://postgr.es/m/CAApHDvojY2UvMiO+9_55ArTj10P1LBNJyyoGB+C65BLDNT0GsQ@mail.gmail.com
Reviewed-by: Nathan Bossart, Tom Lane
The bump allocator was recently added in 29f6a959c. Our other
allocators have a similar macro to this, but seemingly the version of
the macro for those allocators is only used in places where the chunk
header is decoded. Since the bump allocator has no chunk header, none
of those functions exist for bump therefore macro is unused. Remove it.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/5f724fb2-96e1-4f36-b65b-47b337ad432e@eisentraut.org
This is a C11 feature, and we require C99. While at it, go the further
step and get rid of the surrounding union (with uintptr_t) entirely,
as there is currently no use case for this file to access the header of
BlocktableEntry as a uintptr_t, and there are no additional alignment
requirements. The least invasive way seems to be to transfer the old
union name to this struct.
Reported by Pavel Borisov and Andres Freund, per buildfarm member mylodon
Reviewed by Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEH11NYV8AOzKb1bWhCf6J0H=H31f0MgT9xX+HdqvcA1rw@mail.gmail.com
The module relies on a shmem exit callback to clean up any injection
points linked to a specific process. One of the tests checks for the
case of an injection point name reused in a second connection where the
first connection should clean it up, but it did not count for the fact
that the shmem exit callback of the first connection may not have run
when the second connection begins its work.
The regress library includes a wait_pid() that can be used for this
purpose, instead of a custom wait logic, so let's rely on it to wait for
the first connection to exit before working with the second connection.
The module gains a REGRESS_OPTS to be able to look at the regress
library's dlpath.
This issue could be reproduced with a hardcoded sleep() in the shmem
exit callback, and the CI has been able to trigger it sporadically.
Oversight in f587338dec.
Reported-by: Bharath Rupireddy
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/ZhOd3NXAutteokGL@paquier.xyz
After a query cancel, the tail end of ExecQueryAndProcessResults
took care to clear any not-yet-read PGresults; but it forgot about
the one it has already read. There would only be such a result
when handling a multi-command string made with "\;", so that you'd
have to cancel an earlier command in such a string to reach the
bug at all. Even then, there would only be leakage of a single
PGresult per cancel, so it's not surprising nobody noticed this.
But a leak is a leak.
Noted while re-reviewing 90f517821, but this is independent of that:
it dates to 7844c9918. Back-patch to v15 where that came in.
Alexander Lakhin noted an obsolete comment, which led me to revisit
some other important comments in the patch, and that study turned up a
couple of unintended ways in which the chunked-fetch code path didn't
match the normal code path in ExecQueryAndProcessResults. The only
nontrivial problem is that it didn't call PrintQueryStatus, so that
we'd not print the final status result from DML ... RETURNING
commands. To avoid code duplication, move the filter for whether a
result is from RETURNING from PrintQueryResult to PrintQueryStatus.
Discussion: https://postgr.es/m/0023bea5-79c0-476e-96c8-dad599cc3ad8@gmail.com
Previously, the decision to store values in leaves or within the child
pointer was made at compile time, with variable length values using
leaves by necessity. This commit allows introspecting the length of
variable length values at runtime for that decision. This requires
the ability to tell whether the last-level child pointer is actually
a value, so we use a pointer tag in the lowest level bit.
Use this in TID store. This entails adding a byte to the header to
reserve space for the tag. Commit f35bd9bf3 stores up to three offsets
within the header with no bitmap, and now the header can be embedded
as above. This reduces worst-case memory usage when TIDs are sparse.
Reviewed (in an earlier version) by Masahiko Sawada
Discussion: https://postgr.es/m/CANWCAZYw+_KAaUNruhJfE=h6WgtBKeDG32St8vBJBEY82bGVRQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoBci3Hujzijubomo1tdwH3XtQ9F89cTNQ4bsQijOmqnEw@mail.gmail.com
Heikki Linnakangas
Andrew Dunstan
David Rowley
Amit Kapila
Tom Lane
Alexander Korotkov
Peter Eisentraut
Etsuro Fujita
Michael Paquier
Masahiko Sawada
Thomas Munro
Daniel Gustafsson
John Naylor