Allow use of BeginInternalSubTransaction() in parallel mode, so long
as the subtransaction doesn't attempt to acquire an XID or increment
the command counter. Given those restrictions, the other parallel
processes don't need to know about the subtransaction at all, so
this should be safe. The benefit is that it allows subtransactions
intended for error recovery, such as pl/pgsql exception blocks,
to be used in PARALLEL SAFE functions.
Another reason for doing this is that the API of
BeginInternalSubTransaction() doesn't allow reporting failure.
pl/python for one, and perhaps other PLs, copes very poorly with an
error longjmp out of BeginInternalSubTransaction(). The headline
feature of this patch removes the only easily-triggerable failure
case within that function. There remain some resource-exhaustion
and similar cases, which we now deal with by promoting them to FATAL
errors, so that callers need not try to clean up. (It is likely
that such errors would leave us with corrupted transaction state
inside xact.c, making recovery difficult if not impossible anyway.)
Although this work started because of a report of a pl/python crash,
we're not going to do anything about that in the back branches.
Back-patching this particular fix is obviously not very wise.
While we could contemplate some narrower band-aid, pl/python is
already an untrusted language, so it seems okay to classify this
as a "so don't do that" case.
Patch by me, per report from Hao Zhang. Thanks to Robert Haas for
review.
Discussion: https://postgr.es/m/CALY6Dr-2yLVeVPhNMhuBnRgOZo1UjoTETgtKBx1B2gUi8yy+3g@mail.gmail.com
Buildfarm member avocet has shown a plan change by switching the
finalize aggregate stage to use a GroupAggregate rather than a
HashAggregate. This is consistent with autovacuum having triggered on
the table, per analysis by Alexander Lakhin.
Fix this by disabling autovacuum on the table.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/d4493a28-589a-5328-fed5-250f2d7d3e2a@gmail.com
Backpatch-through: 16, where this test was added.
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
Ordinary ALTER TABLE SET SCHEMA will also move any owned sequences
into the new schema. We failed to do likewise for foreign tables,
because AlterTableNamespaceInternal believed that only certain
relkinds could have indexes, owned sequences, or constraints.
We could simply add foreign tables to that relkind list, but it
seems likely that the same oversight could be made again in
future. Instead let's remove the relkind filter altogether.
These functions shouldn't cost much when there are no objects
that they need to process, and surely this isn't an especially
performance-critical case anyway.
Per bug #18407 from Vidushi Gupta. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18407-4fd07373d252c6a0@postgresql.org
If we know the sort order of a CTE's output, and it is relevant
to the outer query, label the CTE's outer-query access path using
those pathkeys. This may enable optimizations such as avoiding
a sort in the outer query.
The code for hoisting pathkeys into the outer query already exists
for regular RTE_SUBQUERY subqueries, but it wasn't getting used for
CTEs, possibly out of concern for maintaining an optimization fence
between the CTE and the outer query. However, on the same arguments
used for commit f7816aec2, there seems no harm in letting the outer
query know what the inner query decided to do.
In support of this, we now remember the best Path as well as Plan
for each subquery for the rest of the planner run. There may be
future applications for having that at hand, and it surely costs
little to build one more List.
Richard Guo (minor mods by me)
Discussion: https://postgr.es/m/CAMbWs49xYd3f8CrE8-WW3--dV1zH_sDSDn-vs2DzHj81Wcnsew@mail.gmail.com
It's now possible to specify a table access method via
CREATE TABLE ... USING for a partitioned table, as well change it with
ALTER TABLE ... SET ACCESS METHOD. Specifying an AM for a partitioned
table lets the value be used for all future partitions created under it,
closely mirroring the behavior of the TABLESPACE option for partitioned
tables. Existing partitions are not modified.
For a partitioned table with no AM specified, any new partitions are
created with the default_table_access_method.
Also add ALTER TABLE ... SET ACCESS METHOD DEFAULT, which reverts to the
original state of using the default for new partitions.
The relcache of partitioned tables is not changed: rd_tableam is not
set, even if a partitioned table has a relam set.
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Reviewed-by: The authors themselves
Discussion: https://postgr.es/m/CAE-ML+9zM4wJCGCBGv01k96qQ3gFv4WFcFy=zqPHKeaEFwwv6A@mail.gmail.com
Discussion: https://postgr.es/m/20210308010707.GA29832%40telsasoft.com
This commit adds a new property called last_inactive_time for slots. It is
set to 0 whenever a slot is made active/acquired and set to the current
timestamp whenever the slot is inactive/released or restored from the disk.
Note that we don't set the last_inactive_time for the slots currently being
synced from the primary to the standby because such slots are typically
inactive as decoding is not allowed on those.
The 'last_inactive_time' will be useful on production servers to debug and
analyze inactive replication slots. It will also help to know the lifetime
of a replication slot - one can know how long a streaming standby, logical
subscriber, or replication slot consumer is down.
The 'last_inactive_time' will also be useful to implement inactive
timeout-based replication slot invalidation in a future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Until now, UNION queries have often been suboptimal as the planner has
only ever considered using an Append node and making the results unique
by either using a Hash Aggregate, or by Sorting the entire Append result
and running it through the Unique operator. Both of these methods
always require reading all rows from the union subqueries.
Here we adjust the union planner so that it can request that each subquery
produce results in target list order so that these can be Merge Appended
together and made unique with a Unique node. This can improve performance
significantly as the union child can make use of the likes of btree
indexes and/or Merge Joins to provide the top-level UNION with presorted
input. This is especially good if the top-level UNION contains a LIMIT
node that limits the output rows to a small subset of the unioned rows as
cheap startup plans can be used.
Author: David Rowley
Reviewed-by: Richard Guo, Andy Fan
Discussion: https://postgr.es/m/CAApHDvpb_63XQodmxKUF8vb9M7CxyUyT4sWvEgqeQU-GB7QFoQ@mail.gmail.com
Up to now we've rejected cases like
BEGIN;
CREATE TYPE rainbow AS ENUM ();
ALTER TYPE rainbow ADD VALUE 'red';
-- use the value 'red', perhaps in a constraint or index
COMMIT;
The concern is that the uncommitted enum value 'red' might get into
an index and then break the index if we roll back the ALTER ADD.
If the ALTER is in the same transaction as the CREATE then it's really
perfectly safe, but we weren't taking the trouble to identify that.
pg_dump in binary-upgrade mode will emit enum definitions that look
like the above, which up to now didn't fall foul of the unsafe-usage
check because we processed each restore command as a separate
transaction. However an upcoming patch proposes to bundle the restore
commands into large transactions to reduce XID consumption during
pg_upgrade, and that makes this behavior a problem.
To fix, remember the OIDs of enum types created in the current
transaction, and allow use of enum values that are added to one later
in the same transaction. To do this fully correctly in the presence
of subtransactions, we'd have to track subtransaction nesting level of
the CREATE and do maintenance work at every subsequent subtransaction
exit. That seems expensive, and we don't need it to satisfy pg_dump's
usage. Hence, apply the additional optimization only when the CREATE
and ALTER are at outermost transaction level.
Patch by me, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/1548468.1711220438@sss.pgh.pa.us
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
Till now, the reason for replication slot invalidation is not tracked
directly in pg_replication_slots. A recent commit 007693f2a3 added
'conflict_reason' to show the reasons for slot conflict/invalidation, but
only for logical slots.
This commit adds a new column 'invalidation_reason' to show invalidation
reasons for both physical and logical slots. And, this commit also turns
'conflict_reason' text column to 'conflicting' boolean column (effectively
reverting commit 007693f2a3). The 'conflicting' column is true for
invalidation reasons 'rows_removed' and 'wal_level_insufficient' because
those make the slot conflict with recovery. When 'conflicting' is true,
one can now look at the new 'invalidation_reason' column for the reason
for the logical slot's conflict with recovery.
The new 'invalidation_reason' column will also be useful to track other
invalidation reasons in the future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/ZfR7HuzFEswakt/a%40ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
The buildfarm animal parula has been sporadically failing in the
partition_prune test for the past week or so. It appears like an
auto-vacuum or auto-analyze has run on one of the partitions of the "ab"
table, causing the plan to change. This is unexpected as the table is
empty.
Here we install some telemetry to find out if this is the case. This
also joins in pg_index to see if something has gone wrong with the index
which could result in the planner being unable to use that index.
We can revert this once we've figured out the cause of the plan
instability.
Reported-by: Tom Lane
Investigation-by: Tom Lane
Discussion: https://postgr.es/m/4009739.1710878318%40sss.pgh.pa.us
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
In combination with to_regtype, this allows converting a string to
the "canonicalized" form emitted by format_type. That usage requires
parsing the string twice, which is slightly annoying but not really
too expensive. We considered alternatives such as returning a record
type, but that way was notationally uglier than this, and possibly
less flexible.
Like to_regtype(), we'd rather that this return NULL for any bad
input, but the underlying type-parsing logic isn't yet capable of
not throwing syntax errors. Adjust the documentation for both
functions to point that out.
In passing, fix up a couple of nearby entries in the System Catalog
Information Functions table that had not gotten the word about our
since-v13 convention for displaying function usage examples.
David Wheeler and Erik Wienhold, reviewed by Pavel Stehule, Jim Jones,
and others.
Discussion: https://postgr.es/m/DF2324CA-2673-4ABE-B382-26B5770B6AA3@justatheory.com
The builtin C.UTF-8 locale has similar semantics to the libc locale of
the same name. That is, code point sort order (fast, memcmp-based)
combined with Unicode semantics for character operations such as
pattern matching, regular expressions, and
LOWER()/INITCAP()/UPPER(). The character semantics are based on
Unicode simple case mappings.
The builtin provider's C.UTF-8 offers several important advantages
over libc:
* faster sorting -- benefits from additional optimizations such as
abbreviated keys and varstrfastcmp_c
* faster case conversion, e.g. LOWER(), at least compared with some
libc implementations
* available on all platforms with identical semantics, and the
semantics are stable, testable, and documentable within a given
Postgres major version
Being based on memcmp, the builtin C.UTF-8 locale does not offer
natural language sort order. But it is an improvement for most use
cases that might otherwise use libc's "C.UTF-8" locale, as well as
many use cases that use libc's "C" locale.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Historically we've printed SubPlan expression nodes as "(SubPlan N)",
which is pretty uninformative. Trying to reproduce the original SQL
for the subquery is still as impractical as before, and would be
mighty verbose as well. However, we can still do better than that.
Displaying the "testexpr" when present, and adding a keyword to
indicate the SubLinkType, goes a long way toward showing what's
really going on.
In addition, this patch gets rid of EXPLAIN's use of "$n" to represent
subplan and initplan output Params. Instead we now print "(SubPlan
N).colX" or "(InitPlan N).colX" to represent the X'th output column
of that subplan. This eliminates confusion with the use of "$n" to
represent PARAM_EXTERN Params, and it's useful for the first part of
this change because it eliminates needing some other indication of
which subplan is referenced by a SubPlan that has a testexpr.
In passing, this adds simple regression test coverage of the
ROWCOMPARE_SUBLINK code paths, which were entirely unburdened
by testing before.
Tom Lane and Dean Rasheed, reviewed by Aleksander Alekseev.
Thanks to Chantal Keller for raising the question of whether
this area couldn't be improved.
Discussion: https://postgr.es/m/2838538.1705692747@sss.pgh.pa.us
When considering nestloop paths for individual partitions within
a partitionwise join, if the inner path is parameterized, it is
parameterized by the topmost parent of the outer rel, not the
corresponding outer rel itself. Therefore, we need to translate the
parameterization so that the inner path is parameterized by the
corresponding outer rel.
Up to now, we did this while generating join paths. However, that's
problematic because we must also translate some expressions that are
shared across all paths for a relation, such as restriction clauses
(kept in the RelOptInfo and/or IndexOptInfo) and TableSampleClauses
(kept in the RangeTblEntry). The existing code fails to translate
these at all, leading to wrong answers, odd failures such as
"variable not found in subplan target list", or executor crashes.
But we can't modify them during path generation, because that would
break things if we end up choosing some non-partitioned-join path.
So this patch postpones reparameterization of the inner path until
createplan.c, where it is safe to modify the referenced RangeTblEntry,
RelOptInfo or IndexOptInfo, because we have made a final choice of which
Path to use. We do still have to check during path generation that
the reparameterization will be possible. So we introduce a new
function path_is_reparameterizable_by_child() to detect that.
The duplication between path_is_reparameterizable_by_child() and
reparameterize_path_by_child() is a bit annoying, but there seems
no other good answer. A small benefit is that we can avoid building
useless reparameterized trees in cases where a non-partitioned join
is ultimately chosen. Also, reparameterize_path_by_child() can now
be allowed to scribble on the input paths, saving a few cycles.
This fix repairs the same problems previously addressed in the
back branches by commits 62f120203 et al.
Richard Guo, reviewed at various times by Ashutosh Bapat, Andrei
Lepikhov, Alena Rybakina, Robert Haas, and myself
Discussion: https://postgr.es/m/CAMbWs496+N=UAjOc=rcD3P7B6oJe4rZw08e_TZRUsWbPxZW3Tw@mail.gmail.com
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
Given a subplan in a MERGE query, EXPLAIN would sometimes fail to
properly display expressions involving Params referencing variables in
other parts of the plan tree.
This would affect subplans outside the topmost join plan node, for
which expansion of Params would go via the top-level ModifyTable plan
node. The problem was that "inner_tlist" for the ModifyTable node's
deparse_namespace was set to the join node's targetlist, but
"inner_plan" was set to the ModifyTable node itself, rather than the
join node, leading to incorrect results when descending to the
referenced variable.
Fix and backpatch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWAv-sZuH%2BwG5xJ-%2BGt7qGNGX8wUQd3XYydMFDKgRB9nw%40mail.gmail.com
destroyStringInfo() is a counterpart to makeStringInfo(), freeing a
palloc'd StringInfo and its data. This is a convenience function to
align the StringInfo API with the PQExpBuffer API. Originally added
in the OAuth patchset, it was extracted and committed separately in
order to aid upcoming JSON work.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi+mWdTd6ujtyF7MsvXvk7ToLRVG_tYAcaGbQLvf=N4KrQw@mail.gmail.com
Commit c855872074 introduced a new parameter to pg_regress to set
the directory where to look for expected files, but accidentally
only implemented it for when compiling pg_regress for ECPG tests.
Fix by adding support for the parameter to the main regression test
compilation of pg_regress as well.
Backpatch to v16 where --expecteddir was introduced.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/CAO6_Xqq5yKJHcJsq__LPcKwSY0XHRqVERNWGxx5ttNXXj7+W=A@mail.gmail.com
Backpatch-through: 16
Commit a3c7a993d fixed some cases involving target columns that are
arrays or composites by applying transformAssignedExpr to the VALUES
entries, and then stripping off any assignment ArrayRefs or
FieldStores that the transformation added. But I forgot about domains
over arrays or composites :-(. Such cases would either fail with
surprising complaints about mismatched datatypes, or insert unexpected
coercions that could lead to odd results. To fix, extend the
stripping logic to get rid of CoerceToDomain if it's atop an ArrayRef
or FieldStore.
While poking at this, I realized that there's a poorly documented and
not-at-all-tested behavior nearby: we coerce each VALUES column to
the domain type separately, and rely on the rewriter to merge those
operations so that the domain constraints are checked only once.
If that merging did not happen, it's entirely possible that we'd get
unexpected domain constraint failures due to checking a
partially-updated container value. There's no bug there, but while
we're here let's improve the commentary about it and add some test
cases that explicitly exercise that behavior.
Per bug #18393 from Pablo Kharo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18393-65fedb1a0de9260d@postgresql.org
This function returns the chunk_id of an on-disk TOASTed value. If
the value is un-TOASTed or not on-disk, it returns NULL. This is
useful for identifying which values are actually TOASTed and for
investigating "unexpected chunk number" errors.
Bumps catversion.
Author: Yugo Nagata
Reviewed-by: Jian He
Discussion: https://postgr.es/m/20230329105507.d764497456eeac1ca491b5bd%40sraoss.co.jp
New provider for collations, like "libc" or "icu", but without any
external dependency.
Initially, the only locale supported by the builtin provider is "C",
which is identical to the libc provider's "C" locale. The libc
provider's "C" locale has always been treated as a special case that
uses an internal implementation, without using libc at all -- so the
new builtin provider uses the same implementation.
The builtin provider's locale is independent of the server environment
variables LC_COLLATE and LC_CTYPE. Using the builtin provider, the
database collation locale can be "C" while LC_COLLATE and LC_CTYPE are
set to "en_US", which is impossible with the libc provider.
By offering a new builtin provider, it clarifies that the semantics of
a collation using this provider will never depend on libc, and makes
it easier to document the behavior.
Discussion: https://postgr.es/m/ab925f69-5f9d-f85e-b87c-bd2a44798659@joeconway.com
Discussion: https://postgr.es/m/dd9261f4-7a98-4565-93ec-336c1c110d90@manitou-mail.org
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
While digging into the code of this feature, I got confused by the fact
that a line is skipped when a value cannot be converted to its expected
attribute even if the line has fewer attributes than the target
relation. The tests had a check for the case of an empty line, this
commit a couple more patterns where a line is incomplete, but skipped
because of a conversion error.
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/Ze_7kZqexdt0BiyC@paquier.xyz
There is a very ancient hack in check_sql_fn_retval that allows a
single SELECT targetlist entry of composite type to be taken as
supplying all the output columns of a function returning composite.
(This is grotty and fundamentally ambiguous, but it's really hard
to do nested composite-returning functions without it.)
As far as I know, that doesn't cause any problems in ordinary
functions. It's disastrous for procedures however. All procedures
that have any output parameters are labeled with prorettype RECORD,
and the CALL code expects it will get back a record with one column
per output parameter, regardless of whether any of those parameters
is composite. Doing something else leads to an assertion failure
or core dump.
This is simple enough to fix: we just need to not apply that rule
when considering procedures. However, that requires adding another
argument to check_sql_fn_retval, which at least in principle might be
getting called by external callers. Therefore, in the back branches
convert check_sql_fn_retval into an ABI-preserving wrapper around a
new function check_sql_fn_retval_ext.
Per report from Yahor Yuzefovich. This has been broken since we
implemented procedures, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CABz5gWHSjj2df6uG0NRiDhZ_Uz=Y8t0FJP-_SVSsRsnrQT76Gg@mail.gmail.com
For pass-by-reference types, the code added in 0b053e78b, which aimed to
resolve a memory leak, was overly aggressive in resetting the per-tuple
memory context which could result in pfree'd memory being accessed
resulting in failing to find previously cached results in the hash
table.
What was happening was prepare_probe_slot() was switching to the
per-tuple memory context and calling ExecEvalExpr(). ExecEvalExpr() may
have required a memory allocation. Both MemoizeHash_hash() and
MemoizeHash_equal() were aggressively resetting the per-tuple context
and after determining the hash value, the context would have gotten reset
before MemoizeHash_equal() was called. This could have resulted in
MemoizeHash_equal() looking at pfree'd memory.
This is less likely to have caused issues on a production build as some
other allocation would have had to have reused the pfree'd memory to
overwrite it. Otherwise, the original contents would have been intact.
However, this clearly caused issues on MEMORY_CONTEXT_CHECKING builds.
Author: Tender Wang, Andrei Lepikhov
Reported-by: Tender Wang (using SQLancer)
Reviewed-by: Andrei Lepikhov, Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAHewXNnT6N6UJkya0z-jLFzVxcwGfeRQSfhiwA+NyLg-x8iGew@mail.gmail.com
Backpatch-through: 14, where Memoize was added
Rename pg_collation.colliculocale to colllocale, and
pg_database.daticulocale to datlocale. These names reflects that the
fields will be useful for the upcoming builtin provider as well, not
just for ICU.
This is purely a rename; no changes to the meaning of the fields.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Peter Eisentraut
... and in particular don't return them as replica identity.
The motivation for this change is letting the primary keys be seen by
code that derives NOT NULL constraints from them, when creating
inheritance children; before this change, if you had a deferrable PK,
pg_dump would not recreate the attnotnull marking properly, because the
column would not be considered as having anything to back said marking
after dropping the throwaway NOT NULL constraint.
The reason we don't want these PKs as replica identities is that
replication can corrupt data, if the uniqueness constraint is
transiently broken.
Reported-by: Amul Sul <sulamul@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b94QonkgsbDXofakHDnORQNgafd1y3Oa5QXfpQNJyXyQ7A@mail.gmail.com
This option can be used to switch a relation to use the access method
set by default_table_access_method when running the command.
This has come up when discussing the possibility to support setting
pg_class.relam for partitioned tables (left out here as future work),
while being useful on its own for relations with physical storage as
these must have an access method set.
Per suggestion from Justin Pryzby.
Author: Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/ZeCZ89xAVFeOmrQC@pryzbyj2023
When an UPDATE or DELETE action in MERGE returns TM_SelfModified,
there are 2 possible causes:
1). The target tuple was already updated or deleted by the current
command. This can happen if the target row joins to more than one
source row, and the SQL standard explicitly says that this must be
an error.
2). The target tuple was already updated or deleted by a later command
in the current transaction. This can happen if the tuple is
modified by a BEFORE trigger or a volatile function used in the
query, and should be an error for the same reason that it is in a
plain UPDATE or DELETE command.
In MERGE's primary error handling block, it failed to check for (2),
causing it to return a misleading error message in such cases.
In the secondary error handling block, following a concurrent update
from another session, it failed to check for (1), causing it to
silently ignore target rows joined to more than one source row,
instead of reporting an error.
Fix this, and add tests for both of these cases.
Per report from Wenjiang Zhang. Back-patch to v15, where MERGE was
introduced.
Discussion: https://postgr.es/m/tencent_41DE0FF443FE14B94A5898D373792109E408%40qq.com
This reverts commit eae7be600b, following a discussion with Tom Lane,
due to concerns that this impacts the decisions made by the planner for
the number of workers spawned based on the inlining and const-folding of
index expressions and predicate for cases that would have worked until
this commit.
Discussion: https://postgr.es/m/162802.1709746091@sss.pgh.pa.us
Backpatch-through: 12
In the corner case where a function returning RECORD has been
simplified to a RECORD constant or an inlined ROW() expression,
ExecInitFunctionScan failed to cross-check the function's result
rowtype against the coldeflist provided by the calling query.
That happened because get_expr_result_type is able to extract a
tupdesc from such expressions, which led ExecInitFunctionScan to
ignore the coldeflist. (Instead, it used the extracted tupdesc
to check the function's output, which of course always succeeds.)
I have not been able to demonstrate any really serious consequences
from this, because if some column of the result is of the wrong
type and is directly referenced by a Var of the calling query,
CheckVarSlotCompatibility will catch it. However, we definitely do
fail to report the case where the function returns more columns than
the coldeflist expects, and in the converse case where it returns
fewer columns, we get an assert failure (but, seemingly, no worse
results in non-assert builds).
To fix, always build the expected tupdesc from the coldeflist if there
is one, and consult get_expr_result_type only when there isn't one.
Also remove the failing Assert, even though it is no longer reached
after this fix. It doesn't seem to be adding anything useful, since
later checking will deal with cases with the wrong number of columns.
The only other place I could find that is doing something similar
is inline_set_returning_function. There's no live bug there because
we cannot be looking at a Const or RowExpr, but for consistency
change that code to agree with ExecInitFunctionScan.
Per report from PetSerAl. After some debate I've concluded that
this should be back-patched. There is a small risk that somebody
has been relying on such a case not throwing an error, but I judge
this outweighed by the risk that I've missed some way in which the
failure to cross-check has worse consequences than sketched above.
Discussion: https://postgr.es/m/CAKygsHSerA1eXsJHR9wft3Gn3wfHQ5RfP8XHBzF70_qcrrRvEg@mail.gmail.com
As coded, the planner logic that calculates the number of parallel
workers to use for a parallel index build uses expressions and
predicates from the relcache, which are flattened for the planner by
eval_const_expressions().
As reported in the bug, an immutable parallel-unsafe function flattened
in the relcache would become a Const, which would be considered as
parallel-safe, even if the predicate or the expressions including the
function are not safe in parallel workers. Depending on the expressions
or predicate used, this could cause the parallel build to fail.
Tests are included that check parallel index builds with parallel-unsafe
predicate and expressions. Two routines are added to lsyscache.h to be
able to retrieve expressions and predicate of an index from its pg_index
data.
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAHewXN=UaAaNn9ruHDH3Os8kxLVmtWqbssnf=dZN_s9=evHUFA@mail.gmail.com
Backpatch-through: 12
This allows the target relation of MERGE to be an auto-updatable or
trigger-updatable view, and includes support for WITH CHECK OPTION,
security barrier views, and security invoker views.
A trigger-updatable view must have INSTEAD OF triggers for every type
of action (INSERT, UPDATE, and DELETE) mentioned in the MERGE command.
An auto-updatable view must not have any INSTEAD OF triggers. Mixing
auto-update and trigger-update actions (i.e., having a partial set of
INSTEAD OF triggers) is not supported.
Rule-updatable views are also not supported, since there is no
rewriter support for non-SELECT rules with MERGE operations.
Dean Rasheed, reviewed by Jian He and Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCVcB1g0nmxuEc-A+gGB0HnfcGQNGYH7gS=7rq0u0zOBXA@mail.gmail.com
Commit 0b16bb877 removed the test query added by commit 79b716cfb,
but not the C-language support function used by that query. I don't
see any plausible reason why we'd need that function again, so throw
it overboard too.
Tom Lane
Alvaro Herrera
David Rowley
Dean Rasheed
Amit Kapila
Peter Eisentraut
Daniel Gustafsson
Amit Langote
Jeff Davis
Heikki Linnakangas
Nathan Bossart
Michael Paquier