The parsing of the authentication files for HBA and ident entries
happens in two phases:
- Tokenization of the files, creating a list of TokenizedAuthLines.
- Validation of the HBA and ident entries, building a set of HbaLines or
IdentLines.
The second phase doing the validation provides already some error
context about the configuration file and the line where a problem
happens, but there is no such information in the first phase when
tokenizing the files. This commit adds an ErrorContextCallback in
tokenize_auth_file(), with a context made of the line number and the
configuration file name involved in a problem. This is useful for files
included in an HBA file for user and database lists, and it will become
much more handy to track problems for files included via a potential
@include[_dir,_if_exists].
The error context is registered so as the full chain of events is
reported when using cascaded inclusions when for example
tokenize_auth_file() recurses over itself on new files, displaying one
context line for each file gone through when tokenizing things.
Author: Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/Y2xUBJ+S+Z0zbxRW@paquier.xyz
This adds a check on the recursion depth when including authentication
configuration files, something that has never been done when processing
'@' files for database and user name lists in pg_hba.conf. On HEAD,
this was leading to a rather confusing error, as of:
FATAL: exceeded maxAllocatedDescs (NN) while trying to open file "/path/blah.conf"
This refactors the code so as the error reported is now the following,
which is the same as for GUCs:
FATAL: could not open file "/path/blah.conf": maximum nesting depth exceeded
This reduces a bit the verbosity of the error message used for files
included in user and database lists, reporting only the file name of
what's failing to load, without mentioning the relative or absolute path
specified after '@' in a HBA file. The absolute path is built upon what
'@' defines anyway, so there is no actual loss of information. This
makes the future inclusion logic much simpler. A follow-up patch will
add an error context to be able to track on which line of which file the
inclusion is failing, to close the loop, providing all the information
needed to know the full chain of events.
This logic has been extracted from a larger patch written by Julien,
rewritten by me to have a unique code path calling AllocateFile() on
authentication files, and is useful on its own. This new interface
will be used later for authentication files included with
@include[_dir,_if_exists], in a follow-up patch.
Author: Michael Paquier, Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/Y2xUBJ+S+Z0zbxRW@paquier.xyz
Add a NodeTag field to struct Bitmapset. This is free because of
alignment considerations on 64-bit hardware. While it adds some
space on 32-bit machines, we aren't optimizing for that case anymore.
The advantage is that data structures such as Lists of Bitmapsets
are now first-class objects to the Node infrastructure, and don't
require special-case code to handle.
This patch includes removal of one such special case, in indxpath.c:
bms_equal_any() can now be replaced by list_member(). There may be
more existing code that could be simplified, but I didn't look very
hard. We also get to drop the read_write_ignore annotations on a
couple of RelOptInfo fields.
The outfuncs/readfuncs support is arranged so that nothing changes
in the string representation of a Bitmapset field; therefore, this
doesn't need a catversion bump.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/109089.1668197158@sss.pgh.pa.us
The current code looks for the sample file in the source directory, but
it seems better to test against the installed sample file.
Backpatch to release 15 where the test was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Currently this only allows for one argument, which must be present, and
always returns a single string. With this change the following now all
work:
$all_config = $node->config_data;
%config_map = ($node->config_data);
$incdir = $node->config_data('--include-dir');
($incdir, $sharedir) = $node->config_data(
qw(--include-dir --share-dir));
Backpatch to release 15 where this was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
It's safe to mark this as immutable, because it does not depend
on the timezone GUC setting. Oversight in commit 600b04d6b.
(There's an argument that timezone definitions do change from
time to time, but we have not worried about that in marking
other timestamp-related functions; for example AT TIME ZONE
has always been considered immutable. The situation is no
worse than our problems with time-varying locales, surely.)
Przemysław Sztoch
Discussion: https://postgr.es/m/eaa3fabe-50fc-bbe8-b096-ce62ddadab85@sztoch.pl
The original report was concerned with a possible inconsistency
between the heap and the visibility map, which I was unable to
confirm. The concern has been retracted.
However, there did seem to be a torn page hazard when using
checksums. By not setting the heap page LSN during redo, the
protections of minRecoveryPoint were bypassed. Fixed, along with a
misleading comment.
It may have been impossible to hit this problem in practice, because
it would require a page tear between the checksum and the flags, so I
am marking this as a theoretical risk. But, as discussed, it did
violate expectations about the page LSN, so it may have other
consequences.
Backpatch to all supported versions.
Reported-by: Konstantin Knizhnik
Reviewed-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/fed17dac-8cb8-4f5b-d462-1bb4908c029e@garret.ru
Backpatch-through: 11
The stanza "SET STORAGE may need to add a TOAST table" does not
test what it's supposed to, and hasn't done so since we added
the ability to store constant column default values as metadata.
We need to use a non-constant default to get the expected table
rewrite to actually happen.
Fix that, and add the missing checks that would have exposed the
problem to begin with.
Noted while reviewing a patch that made changes in this test case.
Back-patch to v11 where the problem came in.
Replace the stopgap fix I made in 0e758ae89 with a cleaner one.
The real problem with 4ab5dae94 is that it contorted this function's
logic substantially, by introducing a third code path that required
different behavior in the function's main loop. That seems quite
unnecessary on closer inspection: the new IsBinaryUpgrade case can
just share the behavior of the other immediate-unlink cases. Hence,
revert 4ab5dae94 and most of 0e758ae89 (keeping the latter's
save/restore errno fix), and add IsBinaryUpgrade to the set of
conditions tested to choose immediate unlink.
Also fix some additional places with sloppy handling of errno,
to ensure we have an invariant that we always continue processing
after any non-ENOENT failure of do_truncate. I doubt that that's
fixing any bug of field importance, so I don't feel it necessary to
back-patch; but we might as well get it right while we're here.
Also improve the comments, which had drifted a bit from what the
code actually does, and neglected to mention some important
considerations.
Back-patch to v15, not because this is fixing any bug but because
it doesn't seem like a good idea for v15's mdunlinkfork logic to be
significantly different from both v14 and v16.
Discussion: https://postgr.es/m/3797575.1667924888@sss.pgh.pa.us
Previously, trying to set storage parameters on a partitioned table
always led to "unrecognized parameter foo", because the code expected
there might be some valid parameters; but there aren't any. The docs
make clear that it's intended that there never will be any, so let's
replace this useless search with a more to-the-point message.
Simon Riggs and Karina Litskevich
Discussion: https://postgr.es/m/CANbhV-H=eZ9kTR9mUgKGK0Qv9uXP=U+dQg3rinQHfTdFMhBA2A@mail.gmail.com
Add a little to the header comments for these functions to make it
clearer what guarantees about commit behavior are provided to callers.
(See commit f92944137 for context.)
Although this is only a comment change, it's really documentation
aimed at authors of extensions, so it seems appropriate to back-patch.
Yugo Nagata and Tom Lane, per further discussion of bug #17434.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
The code building an absolute path to a file included, as prefixed by
'@' in authentication files, for user and database lists uses the same
logic as for GUCs, except that it has no need to know about DataDir as
there is always a calling file to rely to build the base directory path.
The refactoring done in a1a7bb8 makes this move straight-forward, and
unifies the code used for GUCs and authentication files, and the
intention is to rely also on that for the upcoming patch to be able to
include full files from HBA or ident files.
Note that this gets rid of an inconsistency introduced in 370f909, that
copied the logic coming from GUCs but applied it for files included in
authentication files, where the result buffer given to
join_path_components() must have a size of MAXPGPATH. Based on a
double-check of the existing code, all the other callers of
join_path_components() already do that, except the code path changed
here.
Discussion: https://postgr.es/m/Y2igk7q8OMpg+Yta@paquier.xyz
The planner simplifies boolean comparisons such as "x = true" and
"x = false" down to "x" and "NOT x" respectively, to have a canonical
form to ease comparisons. However, if we want to use an index on x,
the index AM APIs require us to reconstitute the comparison-operator
form of the indexqual. While that works, in bitmap indexscans the
canonical form of the qual was emitted as a "filter" condition
although it really only needs to be a "recheck" condition, because
create_bitmap_scan_plan didn't recognize the equivalence of that
form with the generated indexqual. booleq() is pretty cheap so that
likely doesn't make very much difference, but it's unsightly so
let's clean it up.
To fix, add a case to predicate_implied_by() to recognize the
equivalence of such clauses. This is a relatively low-cost place to
add a check, and perhaps it will have additional use cases in future.
Richard Guo and Tom Lane, per discussion of bug #17618 from Sindy
Senorita.
Discussion: https://postgr.es/m/17618-7a2240bfaa7e84ae@postgresql.org
Instead of waking up 10 times per second to check for various timeout
conditions, keep track of when we next have periodic work to do.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA%2BhUKGJGhX4r2LPUE3Oy9BX71Eum6PBcS8L3sJpScR9oKaTVaA%40mail.gmail.com
\d+ is already able to show if a partition or a child table is
"PARTITIONED" via its relkind, hence the addition of a keyword for
"FOREIGN" in the relation description is basically free.
Author: Ian Lawrence Barwick
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=iwzbEz2HR9EhNxQLVhMk2G_OYtQPJ9V=jWLadseggrOA@mail.gmail.com
This change impacts pg_receivewal and pg_basebackup, for the pre-padding
with zeros of all the new non-compressed WAL segments, so as the code is
more robust on partial writes. This makes the code consistent with the
backend (XLogFileInitInternal) when wal_init_zeros is enabled for the
WAL segment initialization.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
A NULL result should be reported when a stats timestamp is set to 0, but
c037471 missed that, leading to a confusing timestamp value after for
example a DML on a freshly-created relation with no scans done on it
yet.
This impacted the following attributes for two system views:
- pg_stat_all_tables.last_idx_scan
- pg_stat_all_tables.last_seq_scan
- pg_stat_all_indexes.last_idx_scan
Reported-by: Robert Treat
Analyzed-by: Peter Eisentraut
Author: Dave Page
Discussion: https://postgr.es/m/CABV9wwPzMfSaz3EfKXXDxKmMprbxwF5r6WPuxqA=5mzRUqfTGg@mail.gmail.com
MSVC does not understand that ereport(ERROR) does not return, so just
return the first enum PartitionStrategy value to keep the compiler from
complaining about the missing return.
Discussion: https://postgr.es/m/20221104161934.GB16921@telsasoft.com
Commit 4ab5dae94 broke mdunlinkfork's logic for removing additional
segments of a multi-gigabyte table, because it neglected to advance
"segno" after unlinking the first segment, in the code path where it
chooses to unlink that one immediately. Then the main remove loop
gets ENOENT at segment zero and figures it's done, so we never remove
whatever additional segments might exist.
The main problem here is with large temporary tables, but WAL replay
of a drop of a large regular table would also fail to remove extra
segments. The third case where this path is taken is for non-main
forks; but I doubt it matters for those since they probably never
exceed 1GB.
The simplest fix is just to increment segno after that unlink().
(Probably this logic could do with a more thorough rethink, but not
with mere hours to go before 15.1 wraps.)
While here, also fix an incautious assumption that
register_forget_request cannot change errno. I don't think that
that has any really bad consequences, as we'd end up trying to unlink
the zero'th segment either way, but it greatly complicates reasoning
about what could happen here. Also make a couple of other cosmetic
fixes.
Per bug #17679 from Balazs Szilfai. Back-patch into v15, as the
faulty patch was.
Discussion: https://postgr.es/m/17679-1095d04450cf6a6e@postgresql.org
The code in charge of listing and classifying a set of configuration
files in a directory was located in guc-file.l, being used currently for
GUCs under "include_dir". This code is planned to be used for an
upcoming feature able to include configuration files for ident and HBA
files from a directory, similarly to GUCs. In both cases, the file
names, suffixed by ".conf", have to be ordered alphabetically. This
logic is moved to a new file, called conffiles.c, so as it is easier to
share this facility between GUCs and the HBA/ident parsing logic.
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/Y2IgaH5YzIq2b+iR@paquier.xyz
We weren't actually using the passed-down list for anything, other
than computing the new value to be passed down further. I (tgl)
probably had the idea that we'd need this data eventually; but
no use-case has emerged in a good long while, so let's just stop
expending useless cycles here.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48KLy9aBb=sZ5MoNmnqAcGHaW_JTGWLCgoE_uMW7S6C-A@mail.gmail.com
Commit aa0105141 repeated one of the oldest mistakes in our book:
thinking that OID is the same as int32. It isn't of course, and
unsurprisingly the first person who came along with a database
OID above 2 billion broke it. Repair.
Per bug #17677 from Sergey Pankov. Back-patch to v15.
Discussion: https://postgr.es/m/17677-a99fa067d7ed71c9@postgresql.org
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
If a syntax error occurred in a SQL-language or PL/pgSQL-language
CREATE FUNCTION or DO command executed in a logical replication worker,
we'd suffer a null pointer dereference or assertion failure. That
seems like a rather contrived case, but nonetheless worth fixing.
The cause is that function_parse_error_transpose assumes it must be
executing within the context of a Portal, but logical/worker.c
doesn't create a Portal since it's not running the standard executor.
We can just back off the hard Assert check and make it fail gracefully
if there's not an ActivePortal. (I have a feeling that the aggressive
check here was my fault originally, probably because I wasn't sure if
the case would always hold and wanted to find out. Well, now we know.)
The hazard seems to exist in all branches that have logical replication,
so back-patch to v10.
Maxim Orlov, Anton Melnikov, Masahiko Sawada, Tom Lane
Discussion: https://postgr.es/m/b570c367-ba38-95f3-f62d-5f59b9808226@inbox.ru
Discussion: https://postgr.es/m/adf0452f-8c6b-7def-d35e-ab516c80088e@inbox.ru
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
Avoid having to list all the possible object types twice. Instead,
only _getObjectDescription() needs to know about specific object
types. It communicates back to _printTocEntry() whether an owner is
to be set.
In passing, remove the logic to use ALTER TABLE to set the owner of
views and sequences. This is no longer necessary. Furthermore, if
pg_dump doesn't recognize the object type, this is now a fatal error,
not a warning.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0a00f923-599a-381b-923f-0d802a727715@enterprisedb.com
Since partitions can be foreign tables not only plain tables, but
logical replication only supports plain tables, we'd better check the
relkind of a partition after we find it. (There was some discussion
of checking this when adding a partitioned table to a subscription;
but that would be inadequate since the troublesome partition could be
added later.) Without this, the situation leads to a segfault or
assertion failure.
In passing, add a separate variable for the target Relation of
a cross-partition UPDATE; reusing partrel seemed mighty confusing
and error-prone.
Shi Yu and Tom Lane, per report from Ilya Gladyshev. Back-patch
to v13 where logical replication into partitioned tables became
a thing.
Discussion: https://postgr.es/m/6b93e3748ba43298694f376ca8797279d7945e29.camel@gmail.com
Previously, the description of XLOG_RUNNING_XACTS showed only
top-transaction XIDs and whether subtransactions overflowed. This commit
improves it to show individual subtransaction XIDs. This also improves the
description of overflowed subtransactions.
This additional information can be helpful for testing and debugging
purposes.
Author: Masahiko Sawada
Reviewd by: Fujii Masao, Kyotaro Horiguchi, Ashutosh Bapat, Bharath Rupireddy
Discussion: https://postgr.es/m/CAD21AoAqvaE+XEeXHHPdAGQPcCoGXxuoeutq_nWhUSQvTt5+tA@mail.gmail.com
These two options are only available with COPY FROM, so the extra logic
in charge of checking the validity of the attributes given has no
purpose.
Author: Zhang Mingli
Reviewed-by: Richard Guo, Kyotaro Horiguchi
Discussion: https://postgr.es/m/F28F0B5A-766F-4D33-BF44-43B3A052D833@gmail.com
We have various requirements when using a dlist_head to keep track of the
number of items in the list. This, traditionally, has been done by
maintaining a counter variable in the calling code. Here we tidy this up
by adding "dclist", which is very similar to dlist but also keeps track of
the number of items stored in the list.
Callers may use the new dclist_count() function when they need to know how
many items are stored. Obtaining the count is an O(1) operation.
For simplicity reasons, dclist and dlist both use dlist_node as their node
type and dlist_iter/dlist_mutable_iter as their iterator type. dclists
have all of the same functionality as dlists except there is no function
named dclist_delete(). To remove an item from a list dclist_delete_from()
must be used. This requires knowing which dclist the given item is stored
in.
Additionally, here we also convert some dlists where additional code
exists to keep track of the number of items stored and to make these use
dclists instead.
Author: David Rowley
Reviewed-by: Bharath Rupireddy, Aleksander Alekseev
Discussion: https://postgr.es/m/CAApHDvrtVxr+FXEX0VbViCFKDGxA3tWDgw9oFewNXCJMmwLjLg@mail.gmail.com
Based on the existing coverage report, some combinations were not
checked at all, so add some tests to do so. Spotted while looking at
the area.
Discussion: https://postgr.es/m/Y2DNm9u7hzIxCXHn@paquier.xyz
DST law changes in Chile, Fiji, Iran, Jordan, Mexico, Palestine,
and Syria. Historical corrections for Chile, Crimea, Iran, and
Mexico.
Also, the Europe/Kiev zone has been renamed to Europe/Kyiv
(retaining the old name as a link).
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Antarctica/Vostok, Asia/Brunei,
Asia/Kuala_Lumpur, Atlantic/Reykjavik, Europe/Amsterdam,
Europe/Copenhagen, Europe/Luxembourg, Europe/Monaco, Europe/Oslo,
Europe/Stockholm, Indian/Christmas, Indian/Cocos, Indian/Kerguelen,
Indian/Mahe, Indian/Reunion, Pacific/Chuuk, Pacific/Funafuti,
Pacific/Majuro, Pacific/Pohnpei, Pacific/Wake and Pacific/Wallis.
(This indirectly affects zones that were already links to one of
these: Arctic/Longyearbyen, Atlantic/Jan_Mayen, Iceland,
Pacific/Ponape, Pacific/Truk, and Pacific/Yap.) America/Nipigon,
America/Rainy_River, America/Thunder_Bay, Europe/Uzhgorod, and
Europe/Zaporozhye were also merged into nearby zones after discovering
that their claimed post-1970 differences from those zones seem to have
been errors.
While the IANA crew have been working on merging zones that have no
post-1970 differences for some time, this batch of changes affects
some zones that are significantly more populous than those merged
in the past, notably parts of Europe. The loss of pre-1970 timezone
history for those zones may be troublesome for applications
expecting consistency of timestamptz display. As an example, the
stored value '1944-06-01 12:00 UTC' would previously display as
'1944-06-01 13:00:00+01' if the Europe/Stockholm zone is selected,
but now it will read out as '1944-06-01 14:00:00+02'.
There exists a "packrat" option that will build the timezone data
files with this old data preserved, but the problem is that it also
resurrects a bunch of other, far less well-attested data; so much so
that actually more zones' contents change from 2022a with that option
than without it. I have chosen not to do that here, for that reason
and because it appears that no major OS distributions are using the
"packrat" option, so that doing so would cause Postgres' behavior
to diverge significantly depending on whether it was built with
--with-system-tzdata. However, for anyone for whom these changes pose
significant problems, there is a solution: build a set of timezone
files with the "packrat" option and use those with Postgres.
Some cases would result in "cache lookup failed for statistics object",
due to trying to fetch inherited statistics when only non-inherited
ones are available or vice versa.
Richard Guo and Justin Pryzby
Discussion: https://postgr.es/m/20221030170520.GM16921@telsasoft.com
- Add tab completion for ALTER SEQUENCE … START …
- Add tab completion for ALTER COLUMN … SET GENERATED …
- Add tab completion for ALTER COLUMN … SET <sequence option>
- Add tab completion for ALTER COLUMN … ADD GENERATED … AS IDENTITY
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Matheus Alcantara <mths.dev@pm.me>
Discussion: https://www.postgresql.org/message-id/flat/87mta1jfax.fsf@wibble.ilmari.org
Add some simple tests that the planner recognizes all the
standard idioms for SEMI and ANTI joins. Failure to optimize
in this way won't necessarily cause any visible change in
query results, so check the plans. We had no similar coverage
before, at least for some variants of antijoin, as noted by
Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-mvPPCJ1W6iK6dD5HiNwoJdi6mZp=-7mE8N9Sh+cd0tQ@mail.gmail.com
When the pg_dump 002_pg_dump.pl test generates the command to load the
schema, it does
# Add terminating semicolon
$create_sql{$test_db} .= $tests{$test}->{create_sql} . ";";
In some cases, this creates a duplicate semicolon, but more
importantly, this doesn't add any newline. So if you look at the
result in either the server log or in
tmp_check/log/regress_log_002_pg_dump, it looks like a complete mess.
This patch makes the output look cleaner for manual inspection: add
semicolon only if necessary, and add two newlines.
Discussion: https://www.postgresql.org/message-id/flat/d6aec95a-8729-43cc-2578-f2a5e46640e0%40enterprisedb.com
This commit adds a function to perform a cross-check between the initial
value of the C declaration associated to a GUC and its actual boot
value in assert-enabled builds. The purpose of this is to prevent
anybody reading these C declarations from being fooled by mismatched
values before they are loaded at program startup.
The following rules apply depending on the GUC type:
* bool - can be false, or same as boot_val.
* int - can be 0, or same as the boot_val.
* real - can be 0.0, or same as the boot_val.
* string - can be NULL, or strcmp'd equal to the boot_val.
* enum - equal to the boot_val.
This is done for the system as well custom GUCs loaded by external
modules, which may require extension developers to adapt the C
declaration of the variables used by these GUCs (testing this change
with some of my own modules has allowed me to catch some stupid typos,
FWIW). This may finish by being a bad experiment depending on the
feedbcak received, but let's see how it goes.
Author: Peter Smith
Reviewed-by: Nathan Bossart, Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
When all of the query's DISTINCT pathkeys have been marked as redundant
due to EquivalenceClasses existing which contain constants, we can just
implement the DISTINCT operation on a query by just limiting the number of
returned rows to 1 instead of performing a Unique on all of the matching
(duplicate) rows.
This applies in cases such as:
SELECT DISTINCT col,col2 FROM tab WHERE col = 1 AND col2 = 10;
If there are any matching rows, then they must all be {1,10}. There's no
point in fetching all of those and running a Unique operator on them to
leave only a single row. Here we effectively just find the first row and
then stop. We are obviously unable to apply this optimization if either
the col = 1 or col2 = 10 were missing from the WHERE clause or if there
were any additional columns in the SELECT clause.
Such queries are probably not all that common, but detecting when we can
apply this optimization amounts to checking if the distinct_pathkeys are
NULL, which is very cheap indeed.
Nothing is done here to check if the query already has a LIMIT clause. If
it does then the plan may end up with 2 Limits nodes. There's no harm in
that and it's probably not worth the complexity to unify them into a
single Limit node.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvqS0j8RUWRUSgCAXxOqnYjHUXmKwspRj4GzVfOO25ByHA@mail.gmail.com
Discussion: https://postgr.es/m/MEYPR01MB7101CD5DA0A07C9DE2B74850A4239@MEYPR01MB7101.ausprd01.prod.outlook.com
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
When we decide we need to make a derived clause equating a.x and
b.y, we already will re-use a previously-made clause "a.x = b.y".
But we might instead have "b.y = a.x", which is perfectly usable
because equivclass.c has never promised anything about the
operand order in clauses it builds. Saving construction of a
new RestrictInfo doesn't matter all that much in itself --- but
because we cache selectivity estimates and so on per-RestrictInfo,
there's a possibility of saving a fair amount of duplicative
effort downstream.
Hence, check for commutative matches as well as direct ones when
seeing if we have a pre-existing clause. This changes the visible
clause order in several regression test cases, but they're all
clearly-insignificant changes.
Checking for the reverse operand order is simple enough, but
if we wanted to check for operator OID match we'd need to call
get_commutator here, which is not so cheap. I concluded that
we don't really need the operator check anyway, so I just
removed it. It's unlikely that an opfamily contains more than
one applicable operator for a given pair of operand datatypes;
and if it does they had better give the same answers, so there
seems little need to insist that we use exactly the one
select_equality_operator chose.
Using the current core regression suite as a test case, I see
this change reducing the number of new join clauses built by
create_join_clause from 9673 to 5142 (out of 26652 calls).
So not quite 50% savings, but pretty close to it.
Discussion: https://postgr.es/m/78062.1666735746@sss.pgh.pa.us
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
As the recent commit 05d4cbf (reverted after as a448e49) has proved,
there is zero coverage for the four SQL functions that can scan the
control file data:
- pg_control_checkpoint()
- pg_control_init()
- pg_control_recovery()
- pg_control_system()
This commit adds a minimal coverage for these functions, checking that
their execution is able to complete. This would have been enough to
catch the problems introduced in the commit mentioned above. More
checks could be done for each individual fields, but it is unclear
whether this would be better than the other checks in place in the
backend code.
Per discussion with Bharath Rupireddy.
Discussion: https://postgr.es/m/Y1d2FZmQmyAhPSRG@paquier.xyz
These numbers are strictly-monotone identifiers assigned to each rule
of pg_hba_file_rules and each map of pg_ident_file_mappings when loading
the HBA and ident configuration files, indicating the order in which
they are checked at authentication time, until a match is found.
With only one file loaded currently, this is equivalent to the line
numbers assigned to the entries loaded if one wants to know their order,
but this becomes mandatory once the inclusion of external files is
added to the HBA and ident files to be able to know in which order the
rules and/or maps are applied at authentication. Note that NULL is used
when a HBA or ident entry cannot be parsed or validated, aka when an
error exists, contrary to the line number.
Bump catalog version.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The intention behind 1b73d0b was to limit the use of TokenizedAuthLine,
but I have fat-fingered one location in parse_hba_line() when creating
the HbaLine, where this should use the local variable and not the value
coming from TokenizedAuthLine. This logic is the exactly the same, but
let's be clean about all that on consistency grounds.
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20221026032730.k3sib5krgm7l6njk@jrouhaud
This has the advantage to limit the presence of the GUC values
hba_file and ident_file to the code paths where these files are loaded,
easing the introduction of an upcoming feature aimed at adding inclusion
logic for files and directories in HBA and ident files.
Note that this needs the addition of the source file name to HbaLine, in
addition to the line number, which is something needed by the backend in
two places of auth.c (authentication failure details and auth_id log
when log_connections is enabled).
While on it, adjust a log generated on authentication failure to report
the name of the actual HBA file on which the connection attempt matched,
where the line number and the raw line written in the HBA file were
already included. This was previously hardcoded as pg_hba.conf, which
would be incorrect when a custom value is used at postmaster startup for
the GUC hba_file.
Extracted from a larger patch by the same author.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The IsCTIDVar() tests in nodeTidscan.c and nodeTidrangescan.c
look buggy at first sight: they aren't checking that the varno
matches the table to be scanned. Actually they're safe because
any Var in a scan-level qual must be for the correct table ...
but if we're depending on that, it's pretty pointless to verify
varlevelsup. (Besides which, varlevelsup is *always* zero at
execution, since we've flattened the rangetable long since.)
Remove the useless varlevelsup check, and instead add some
commentary explaining why we don't need to check varno.
Noted while fooling with a planner change that causes the order
of "t1.ctid = t2.ctid" to change in some tidscan.sql tests;
I was briefly fooled into thinking there was a live bug here.
This adjusts a few things for GUCs related to logical replication,
replication slots and WAL senders, in the shape of incorrect comments
and values inconsistent with their initial default value.
Author: Peter Smith
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Commit f357233c assumed that it was OK to return ENOENT directly if
lstat() failed that way. If we got STATUS_DELETE_PENDING while trying
to unlink a file that we had already unlinked successfully once before
but someone else still had open (on a kernel version that has "pending"
unlinks by default), then we would no longer reach the retry loop in
pgunlink(). That loop claims to be only for handling sharing violations
(a different phenomenon), but the errno is the same.
Restore that behavior with an explicit check, to see if it fixes the
occasional 'directory not empty' failures seen in the pg_upgrade tests
on CI. Further improvements are possible with proposed upgrades to
modern Windows APIs that would replace this convoluted code.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220920013122.GA31833%40telsasoft.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Commit c5cb8f3b supposed that we'd only ever have to follow one junction
point in stat(), because we don't construct longer chains of them ourselves.
When examining a parent directory supplied by the user, we should really be
able to cope with longer chains, just in case someone has their system
set up that way. Choose an arbitrary cap of 8, to match the minimum
acceptable value of SYMLOOP_MAX in POSIX.
Previously I'd avoided reporting ELOOP thinking Windows didn't have it,
but it turns out that it does, so we can use the proper error number.
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/CA%2BhUKGJ7JDGWYFt9%3D-TyJiRRy5q9TtPfqeKkneWDr1XPU1%2Biqw%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Since commit c5cb8f3b taught stat() to follow symlinks, and since initdb
uses pg_mkdir_p(), and that examines parent directories, our humble
readlink() implementation can now be exposed to junction points not of
PostgreSQL origin. Those might be corrupted by our naive path mangling,
which doesn't really understand NT paths in general.
Simply decline to transform paths that don't look like a drive absolute
path. That means that readlink() returns the NT path directly when
checking a parent directory of PGDATA that happen to point to a drive
using "rooted" format. That works for the purposes of our stat()
emulation.
Reported-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/4590c37927d7b8ee84f9855d83229018%40postgrespro.ru
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Commit df3737a651 added an incorrect assertion about the preconditions
for invoking the backup cleanup callback: it misfires at session end in
case a backup completes successfully. Fix it, using coding from Michaël
Paquier. Also add some tests for the various cases.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20221021.161038.1277961198945653224.horikyota.ntt@gmail.com
While looking at how these are handled in the parser and the executor, I
have noticed that there is no test coverage for most of these when
reverse-engineering an expression for a SQLValueFunction node in
ruleutils.c, including how these are reparsed when included in a FROM
clause. Some hacking in this area has showed me that these could break
easily, so add some coverage to track the existing compatibility.
Extracted from a much larger patch by me.
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
The new tests have been reporting a warning hidden in the logs, as of
"Odd number of elements in hash assignment" (perlcritic or similar did
not report an issue, actually). This comes down to a typo in the test
"matching regexp for username" for a double-quoted regexp using commas,
where we passed an extra argument. The test is intended to pass, but
this was causing the test to fail. This also pointed out that the
newly-added role "md5,role" lacks an entry in the password file used to
provide the password, so add one.
While on it, make the tests pickier by checking the contents of the logs
generated on successful authentication.
Oversights in 8fea868.
As of this commit, any database or user entry beginning with a slash (/)
is considered as a regular expression. This is particularly useful for
users, as now there is no clean way to match pattern on multiple HBA
lines. For example, a user name mapping with a regular expression needs
first to match with a HBA line, and we would skip the follow-up HBA
entries if the ident regexp does *not* match with what has matched in
the HBA line.
pg_hba.conf is able to handle multiple databases and roles with a
comma-separated list of these, hence individual regular expressions that
include commas need to be double-quoted.
At authentication time, user and database names are now checked in the
following order:
- Arbitrary keywords (like "all", the ones beginning by '+' for
membership check), that we know will never have a regexp. A fancy case
is for physical WAL senders, we *have* to only match "replication" for
the database.
- Regular expression matching.
- Exact match.
The previous logic did the same, but without the regexp step.
We have discussed as well the possibility to support regexp pattern
matching for host names, but these happen to lead to tricky issues based
on what I understand, particularly with host entries that have CIDRs.
This commit relies heavily on the refactoring done in a903971 and
fc579e1, so as the amount of code required to compile and execute
regular expressions is now minimal. When parsing pg_hba.conf, all the
computed regexps needs to explicitely free()'d, same as pg_ident.conf.
Documentation and TAP tests are added to cover this feature, including
cases where the regexps use commas (for clarity in the docs, coverage
for the parsing logic in the tests).
Note that this introduces a breakage with older versions, where a
database or user name beginning with a slash are treated as something to
check for an equal match. Per discussion, we have discarded this as
being much of an issue in practice as it would require a cluster to
have database and/or role names that begin with a slash, as well as HBA
entries using these. Hence, the consistency gained with regexps in
pg_ident.conf is more appealing in the long term.
**This compatibility change should be mentioned in the release notes.**
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
It's unclear why a separate type would be needed here. We use plain
pid_t (or int) everywhere else.
(The only relevant platform where pid_t is not int is 64-bit MinGW,
where it is long long int. So defining pid_t as long (which is 32-bit
on Windows), as was done here, doesn't even accommodate that one.)
Reverts 66fa6eba5a.
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
Because of a small thinko in 7844c9918a,
psql -c would exit successfully when a query is canceled. Fix this so
that it exits with a nonzero status, just like for all other errors.
Since pg_backup_start() and pg_backup_stop() exist, the tablespace map
data and the backup state data (backup_label string until 7d70809) have
been allocated in the TopMemoryContext. This approach would cause
memory leaks in the session calling these functions if failures happen
before pg_backup_stop() ends, leaking more memory on repeated failures.
Both things need little memory so that would not be really noticeable
for most users, except perhaps connection poolers with long-lived
connections able to trigger backup failures with these functions.
This commit improves the logic in this area by not allocating anymore
the backup-related data that needs to travel across the SQL-callable
backup functions in TopMemoryContext, by using instead a dedicated
memory context child of TopMemoryContext. The memory context is created
in pg_backup_start() and deleted when finishing pg_backup_stop(). In
the event of an in-flight failure, this memory context gets reset in the
follow-up pg_backup_start() call, so as we are sure that only one run
worth of data is leaked at any time. Some cleanup was already done for
the backup data on a follow-up call of pg_backup_start(), but using a
memory context makes the whole simpler.
BASE_BACKUP commands are executed in isolation, relying on the memory
context created for replication commands, hence these do not need such
an extra logic.
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Alvaro Herrera, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXqvfKF2B0beQ=aJMdWnpNohmBPsRg=EDQj_6y1t2O8mQ@mail.gmail.com
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
It happens that the parts of hba.conf that are planned to be extended
to support regular expressions would finish by using the same error
message as the one used currently for pg_ident.conf when a regular
expression cannot be compiled, as long as the routine centralizing the
logic, regcomp_auth_token(), knows from which file the regexp comes from
and its line location in the so-said file.
This change makes the follow-up patches slightly simpler, and the logic
remains the same. I suspect that this makes the proposal to add support
for file inclusions in pg_ident.conf and pg_hba.conf slightly simpler,
as well.
Extracted from a larger patch by the same author. This is similar to
the refactoring done in fc579e1.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
Various test suites use the "openssl" program as part of their setup.
There isn't a way to override which openssl program is to be used,
other than by fiddling with the path, perhaps. This has gotten
increasingly problematic because different versions of openssl have
different capabilities and do different things by default.
This patch checks for an openssl binary in configure and meson setup,
with appropriate ways to override it. This is similar to how "lz4"
and "zstd" are handled, for example. The meson build system actually
already did this, but the result was only used in some places. This
is now applied more uniformly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/dc638b75-a16a-007d-9e1c-d16ed6cf0ad2%40enterprisedb.com
This makes the choice of result scale of numeric power() for integer
exponents consistent with the choice for non-integer exponents, and
with the result scale of other numeric functions. Specifically, the
result scale will be at least as large as the scale of either input,
and sufficient to ensure that the result has at least 16 significant
digits.
Formerly, the result scale was based only on the scale of the first
input, without taking into account the weight of the result. For
results with negative weight, that could lead to results with very few
or even no non-zero significant digits (e.g., 10.0 ^ (-18) produced
0.0000000000000000).
Fix this by moving responsibility for the choice of result scale into
power_var_int(), which already has code to estimate the result weight.
Per report by Adrian Klaver and suggested fix by Tom Lane.
No back-patch -- arguably this is a bug fix, but one which is easy to
work around, so it doesn't seem worth the risk of changing query
results in stable branches.
Discussion: https://postgr.es/m/12a40226-70ac-3a3b-3d3a-fdaf9e32d312%40aklaver.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
Set up a signal handler for INT/TERM so that we run our END block if we
get them. In END, if the exit status indicates a problem, call
_update_pid(-1) to improve chances of the stop working in case start()
hasn't returned yet.
Also, change END's teardown_node() so that it passes fail_ok=>1, so that
if a node fails to stop, we still stop the other nodes in the same test.
Per complaint from Andres Freund.
This doesn't seem important enough to backpatch, at least for now.
Discussion: https://postgr.es/m/20220930040734.mbted42oiynhn2t6@awork3.anarazel.de
After commit 39969e2a1e, ->forcePageWrites is no longer very
interesting: we can just test whether runningBackups is different from 0.
This simplifies some code, so do away with it.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
We had two copies of almost identical logic to revert shared memory
state when a running backup aborts; we can remove
pg_backup_start_callback if we adapt do_pg_abort_backup so that it can
be used for this purpose too.
However, in order for this to work, we have to repurpose the flag passed
to do_pg_abort_backup. It used to indicate whether to throw a warning
(and the only caller always passed true). It now indicates whether the
callback is being called at start time (in which case the session backup
state is known not to have been set to RUNNING yet, so action is always
taken) or shmem time (in which case action is only taken if the session
backup state is RUNNING). Thus the meaning of the flag is no longer
superfluous, but it's actually quite critical to get right. I (Álvaro)
chose to change the polarity and the code flow re. the flag from what
Bharath submitted, for coding clarity.
Co-authored-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20221013111330.564fk5tkwe3ha77l%40alvherre.pgsql
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
make_ctags did not include field members of structs since the commit
964d01ae90.
For example, in the following field of RestrictInfo:
Selectivity norm_selec pg_node_attr(equal_ignore);
pg_node_attr was mistakenly interpreted to be the name of the field.
To fix this, add -I option to ctags command if the command is
Exuberant ctags or Universal ctags (for plain old ctags, struct
members are not included in the tags file anyway).
Also add "-e" and "-n" options to make_ctags. The -e option invokes
ctags command with -e option, which produces TAGS file for emacs. This
allows to eliminate duplicate codes in make_etags so that make_etags
just exec make_ctags with -e option.
The -n option allows not to produce symbolic links in each
sub directory (the default is producing symbolic links).
Author: Yugo Nagata
Reviewers: Alvaro Herrera, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20221007154442.76233afc7c5b255c4de6528a%40sraoss.co.jp
AuthToken gains a regular expression, and IdentLine is changed so as it
uses an AuthToken rather than tracking separately the ident user string
used for the regex compilation and its generated regex_t. In the case
of pg_ident.conf, a set of AuthTokens is built in the pre-parsing phase
of the file, and an extra regular expression is compiled when building
the list of IdentLines, after checking the sanity of the fields in a
pre-parsed entry.
The logic in charge of computing and executing regular expressions is
now done in a new set of routines called respectively
regcomp_auth_token() and regexec_auth_token() that are wrappers around
pg_regcomp() and pg_regexec(), working on AuthTokens. While on it, this
patch adds a routine able to free an AuthToken, free_auth_token(), to
simplify a bit the logic around the requirement of using a specific free
routine for computed regular expressions. Note that there are no
functional or behavior changes introduced by this commit.
The goal of this patch is to ease the use of regular expressions with
more items of pg_hba.conf (user list, database list, potentially
hostnames) where AuthTokens are used extensively. This will be tackled
later in a separate patch.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
Preprocessing of the HAVING clause will reduce havingQual to NIL
if the clause is constant-TRUE. This is one case where that
convention is rather unfortunate, because "HAVING TRUE" is not at all
the same as not having any HAVING clause at all. (Per the SQL spec,
it still forces the query to be grouped.) The planner deals with this
by having a boolean hasHavingQual that records whether havingQual was
originally nonempty; places that just want to check whether HAVING
was specified are supposed to consult that.
I found three places that got that wrong. Fortunately, these could
only affect cost estimates not correctness. It'd be hard even
to demonstrate the errors; for example, the one in allpaths.c would
only matter in a query that has HAVING TRUE but no GROUP BY and no
aggregates, which would require a completely variable-free SELECT
list, making the case probably of only academic interest. Hence,
while these are worth fixing before someone copies the incorrect
coding somewhere more critical, they don't seem worth back-patching.
I didn't bother trying to devise regression tests, either.
Discussion: https://postgr.es/m/2503888.1666042643@sss.pgh.pa.us
The original hint says to use SET PUBLICATION when really ADD/DROP
PUBLICATION is called for, so this is arguably a bug fix.
Also, a very similar message elsewhere was using an inconsistent
SQLSTATE.
While at it, unwrap some strings.
Backpatch to 15.
Author: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/OS0PR01MB57160AD0E7386547BA978EB394299@OS0PR01MB5716.jpnprd01.prod.outlook.com
These routines have been renamed in a19e5ce. There is no need to keep
the compatibility declarations on HEAD, as once an extension moves to
the new routine name when compiling with v16~ the code would work the
same way when recompiled on v15. No backpatch to v15 for this one,
because ABI compatibility has to be maintained there.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
When creating a cast that uses a conversion function, we've
historically allowed the input and result types to be
binary-compatible with the function's input and result types,
rather than necessarily being identical. This means that the new
cast is logically dependent on the binary-compatible cast or casts
that it references: if those are defined by pg_cast entries, and you
try to restore the new cast without having defined them, it'll fail.
Hence, we should make pg_depend entries to record these dependencies
so that pg_dump knows that there is an ordering requirement.
This is not the only place where we allow such shortcuts; aggregate
functions for example are similarly lax, and in principle should gain
similar dependencies. However, for now it seems sufficient to fix
the cast-versus-cast case, as pg_dump's other ordering heuristics
should keep it out of trouble for other object types.
Per report from David Turoň; thanks also to Robert Haas for
preliminary investigation. I considered back-patching, but
seeing that this issue has existed for many years without
previous reports, it's not clear it's worth the trouble.
Moreover, back-patching wouldn't be enough to ensure that the
new pg_depend entries exist in existing databases anyway.
Discussion: https://postgr.es/m/OF0A160F3E.578B15D1-ONC12588DA.003E4857-C12588DA.0045A428@notes.linuxbox.cz
DefineQueryRewrite() has long required that ON SELECT rules be named
"_RETURN". But we overlooked the converse case: we should forbid
non-ON-SELECT rules that are named "_RETURN". In particular this
prevents using CREATE OR REPLACE RULE to overwrite a view's _RETURN
rule with some other kind of rule, thereby breaking the view.
Per bug #17646 from Kui Liu. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
The executor will dump core if it's asked to execute a seqscan on
a relation having no table AM, such as a view. While that shouldn't
really happen, it's possible to get there via catalog corruption,
such as a missing ON SELECT rule. It seems worth installing a defense
against that. There are multiple plausible places for such a defense,
but I picked the planner's get_relation_info().
Per discussion of bug #17646 from Kui Liu. Back-patch to v12 where
the tableam APIs were introduced; in older versions you won't get a
SIGSEGV, so it seems less pressing.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
There is already some coverage for that in the kerberos test suite,
though it requires PG_TEST_EXTRA to be set as per its insecure nature.
This provides coverage in a default setup, as long as peer is supported
on the platform where its test is run.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/7f87ca27-e184-29da-15d6-8be4325ad02e@gmail.com
If the non-recursive term of a SEARCH BREADTH FIRST recursive
query has only constants in its target list, the planner will
fold the starting RowExpr added by rewrite into a simple Const
of type RECORD. The executor doesn't have any problem with
that --- but EXPLAIN VERBOSE will encounter the Const as the
ultimate source of truth about what the field names of the
SET column are, and it didn't know what to do with that.
Fortunately, we can pull the identifying typmod out of the
Const, in much the same way that record_out would.
For reasons that remain a bit obscure to me, this only fails
with SEARCH BREADTH FIRST, not SEARCH DEPTH FIRST or CYCLE.
But I added regression test cases for both of those options
too, just to make sure we don't break it in future.
Per bug #17644 from Matthijs van der Vleuten. Back-patch
to v14 where these constructs were added.
Discussion: https://postgr.es/m/17644-3bd1f3036d6d7a16@postgresql.org
In the latest version of Apple's macOS SDK, <sys/socket.h>
fails to compile if "REF" is #define'd as something.
Apple may or may not agree that this is a bug, and even if
they do accept the bug report I filed, they probably won't
fix it very quickly. In the meantime, our back branches will all
fail to compile gram.y. v15 and HEAD currently escape the problem
thanks to the refactoring done in 98e93a1fc, but that's purely
accidental. Moreover, since that patch removed a widely-visible
inclusion of <netdb.h>, back-patching it seems too likely to break
third-party code.
Instead, change the token's code name to REF_P, following our usual
convention for naming parser tokens that are likely to have symbol
conflicts. The effects of that should be localized to the grammar
and immediately surrounding files, so it seems like a safer answer.
Per project policy that we want to keep recently-out-of-support
branches buildable on modern systems, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/1803927.1665938411@sss.pgh.pa.us
snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
While directly targetting a foreign table with MERGE was already
expressly forbidden, we failed to catch the case of a partitioned table
that has a foreign table as a partition; and the result if you try is an
incomprehensible error. Fix that by adding a specific check.
Backpatch to 15.
Reported-by: Tatsuhiro Nakamori <bt22nakamorit@oss.nttdata.com>
Discussion: https://postgr.es/m/bt22nakamorit@oss.nttdata.com
It can be useful to know when a relation has last been used, e.g., when
evaluating whether an index is still required. It was already possible to
infer the time of the last usage by tracking, e.g.,
pg_stat_all_indexes.idx_scan over time. But far from everybody does so.
To make it easier to detect the last time a relation has been scanned, track
that time in each relation's pgstat entry. To minimize overhead a) the
timestamp is updated only when the backend pending stats entry is flushed to
shared stats b) the last transaction's stop timestamp is used as the
timestamp.
Bumps catalog and stats format versions.
Author: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/CA+OCxozrVHNFVEPkweUHMZje+t1tfY816d9MZYc6eZwOOusOaQ@mail.gmail.com
Previously GetCurrentTransactionStopTimestamp() computed a new timestamp
whenever xactStopTimestamp was unset and xactStopTimestamp was only set when a
commit or abort record was written.
An upcoming patch will add additional calls to
GetCurrentTransactionStopTimestamp() from pgstats. To avoid computing
timestamps multiple times, set xactStopTimestamp in
GetCurrentTransactionStopTimestamp() if not already set.
Author: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/20220906155325.an3xesq5o3fq36gt%40awork3.anarazel.de
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
The previous patch made addition of new GUCs cheap, but other GUC
operations aren't improved and indeed get a bit slower, because
hash_seq_search() is slower than just scanning a pointer array.
However, most performance-critical GUC operations only need
to touch a relatively small fraction of the GUCs; especially
so for AtEOXact_GUC(). We can improve matters at the cost
of a bit more space by adding dlist or slist links to the
GUC data structures. This patch invents lists that track
(1) all GUCs with non-default "source";
(2) all GUCs with nonempty state stack (implying they've
been changed in the current transaction);
(3) all GUCs due for reporting to the client.
All of guc.c's performance-critical cases can make use of one or
another of these lists to avoid searching the whole hash table.
In particular, the stack list means that transaction end
doesn't take time proportional to the number of GUCs, but
only to the number changed in the current transaction.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
This gets rid of bsearch() in favor of hashed lookup. The main
advantage is that it becomes far cheaper to add new GUCs, since
we needn't re-sort the pointer array. Adding N new GUCs had
been O(N^2 log N), but now it's closer to O(N). We need to
sort only in SHOW ALL and equivalent functions, which are
hopefully not performance-critical to anybody.
Also, merge GetNumConfigOptions() into get_guc_variables(),
because in a world where the set of GUCs isn't fairly static
you really want to consider those two results as tied together
not independent.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
We lack a version of repalloc() that supports MCXT_ALLOC_NO_OOM
semantics, so invent repalloc_extended() with the usual set of
flags. repalloc_huge() becomes a legacy wrapper for that.
Also, fix dynahash.c so that it can support HASH_ENTER_NULL
requests when using the default palloc-based allocator.
The only reason it didn't do that already was the lack of the
MCXT_ALLOC_NO_OOM option when that code was written, ages ago.
While here, simplify a few overcomplicated tests in mcxt.c.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
The comment talked about some Asserts which did not exist and also a
variable name which seems to have long since disappeared.
Rewrite the comment in a way that will hopefully stand the test of
time and inform people why we always write "INSERT 0 <nrows>" instead of
"INSERT <nrows>" in the command completion tag for INSERT.
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/CAApHDvpiUg09AvvGAVopNAKemA9z-kCmt7Fi6HKauc32bKzx4w@mail.gmail.com
In FIPS mode, these calls will fail. By having them in a separate
file, it would make it easier to have an alternative output file or
selectively disable these tests. This isn't done here; this is just
some preparation.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/647f6cc1-473d-f788-ade0-c09201e5ab6a@enterprisedb.com
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
Contrary to what is documented in src/backend/access/transam/README,
ginHeapTupleFastInsert() had a few ordering issues with the way it does
its WAL operations when inserting items in its fast path.
First, when using a separate list, XLogBeginInsert() was being always
called before START_CRIT_SECTION(), and in this case a second thing was
wrong when merging lists, as an exclusive lock was taken on the tail
page *before* calling XLogBeginInsert(). Finally, when inserting items
into a tail page, the order of XLogBeginInsert() and
START_CRIT_SECTION() was reversed. This commit addresses all these
issues by moving the calls of XLogBeginInsert() after all the pages
logged are locked and pinned, within a critical section.
Author: Matthias van de Meent, Zhang Mingli
Discussion: https://postgr.es/m/CAEze2WhL8uLMqynnnCu1LAPwxD5RKEo0nHV+eXGg_N6ELU88HQ@mail.gmail.com
This file needs xlogreader.h only for the XLogReaderState typedef; but
we can dodge that by forward-declaring it. Many files use xlog.h for
reasons other than reading WAL, and it's not good to force all those
files to include xlogreader.h, so take it out.
Surprisingly, there is no fallout in core code from making this change.
Perhaps external code will have to start including xlogreader.h.
An LSN was calculated from a segment number, a segment size and a
position offset, matching exactly the LSN given by the caller of
XLogReaderValidatePageHeader(). This change removes the extra LSN
calculation, relying only on the LSN given by the function caller
instead.
Author: Bharath Rupireddy
Reviewed-by: Richard Guo, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACXuh4Ms9j9sxMYdtHEe=5sFcyrs-GAHyADu_A_G71kZTg@mail.gmail.com
The postmaster is not supposed to do anything that depends
fundamentally on shared memory contents, because that creates
the risk that a backend crash that trashes shared memory will
take the postmaster down with it, preventing automatic recovery.
In commit 969d7cd43 I lost sight of this principle and coded
AssignPostmasterChildSlot() in such a way that it could fail
or even crash if the shared PMSignalState structure became
corrupted. Remarkably, we've not seen field reports of such
crashes; but I managed to induce one while testing the recent
changes around palloc chunk headers.
To fix, make a semi-duplicative state array inside the postmaster
so that we need consult only local state while choosing a "child
slot" for a new backend. Ensure that other postmaster-executed
routines in pmsignal.c don't have critical dependencies on the
shared state, either. Corruption of PMSignalState might now
lead ReleasePostmasterChildSlot() to conclude that backend X
failed, when actually backend Y was the one that trashed things.
But that doesn't matter, because we'll force a cluster-wide reset
regardless.
Back-patch to all supported branches, since this is an old bug.
Discussion: https://postgr.es/m/3436789.1665187055@sss.pgh.pa.us
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
Michael Paquier
Peter Eisentraut
Tom Lane
Andrew Dunstan
Noah Misch
Jeff Davis
Amit Kapila
Alvaro Herrera
Thomas Munro
David Rowley
Andres Freund
Etsuro Fujita
John Naylor
Heikki Linnakangas
Robert Haas
Dean Rasheed
Tatsuo Ishii
Bruce Momjian