This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
of this are to centralise the conflict code to allow further change,
as well as to allow passing through the full reason for the conflict
through to the conflicting backends. Backend state alters how we
can handle different types of conflict so this is now required.
As originally suggested by Heikki, no longer optional.
underlying catalog not only the index itself. Otherwise, if the cache
load process touches the catalog (which will happen for many though not
all of these indexes), we are locking index before parent table, which can
result in a deadlock against processes that are trying to lock them in the
normal order. Per today's failure on buildfarm member gothic_moth; it's
surprising the problem hadn't been identified before.
Back-patch to 8.2. Earlier releases didn't have the issue because they
didn't try to lock these indexes during load (instead assuming that they
couldn't change schema at all during multiuser operation).
especially not ROLLBACK. ROLLBACK might need to be executed in an already
aborted transaction, when there is no safe way to revalidate the plan. But
in general there's no point in marking utility statements invalid, since
they have no plans in the normal sense of the word; so we might as well
work a bit harder here to avoid future revalidation cycles.
Back-patch to 8.4, where the bug was introduced.
in the parameter array. Noted while experimenting with an example
from Pavel. This wouldn't come up in normal use, but it ought to honor
the specification that a parameter array can have unused slots.
occurring during a reload, such as query-cancel. Instead of zeroing out
an existing relcache entry and rebuilding it in place, build a new relcache
entry, then swap its contents with the old one, then free the new entry.
This avoids problems with code believing that a previously obtained pointer
to a cache entry must still reference a valid entry, as seen in recent
failures on buildfarm member jaguar. (jaguar is using CLOBBER_CACHE_ALWAYS
which raises the probability of failure substantially, but the problem
could occur in the field without that.) The previous design was okay
when it was made, but subtransactions and the ResourceOwner mechanism
make it unsafe now.
Also, make more use of the already existing rd_isvalid flag, so that we
remember that the entry requires rebuilding even if the first attempt fails.
Back-patch as far as 8.2. Prior versions have enough issues around relcache
reload anyway (due to inadequate locking) that fixing this one doesn't seem
worthwhile.
can upgrade clusters without renaming the tablespace directories. New
directory structure format is, e.g.:
$PGDATA/pg_tblspc/20981/PG_8.5_201001061/719849/83292814
rowtype contains dropped columns. Sometimes the input tuple will be formed
from a select targetlist in which dropped columns are filled with a NULL
of an arbitrary type (the planner typically uses INT4, since it can't tell
what type the dropped column really was). So we need to relax the rowtype
compatibility check to not insist on physical compatibility if the actual
column value is NULL.
In principle we might need to do this for functions returning composite
types, too (see tupledesc_match()). In practice there doesn't seem to be
a bug there, probably because the function will be using the same cached
rowtype descriptor as the caller. Fixing that code path would require
significant rearrangement, so I left it alone for now.
Per complaint from Filip Rembialkowski.
Previously we only cancelled sessions that were in-transaction.
Simple fix is to just cancel all sessions without waiting. Doing
it this way avoids complicating common code paths, which would
not be worth the trouble to cover this rare case.
Problem report and fix by Andres Freund, edited somewhat by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
Previously, fastgetattr() and heap_getattr() tested their fourth argument
against a null pointer, but any attempt to use them with a literal-NULL
fourth argument evaluated to *(void *)0, resulting in a compiler error.
Remove these NULL tests to avoid leading future readers of this code to
believe that this has a chance of working. Also clean up related legacy
code in nocachegetattr(), heap_getsysattr(), and nocache_index_getattr().
The new coding standard is that any code which calls a getattr-type
function or macro which takes an isnull argument MUST pass a valid
boolean pointer. Per discussion with Bruce Momjian, Tom Lane, Alvaro
Herrera.
extract a system column, and remove a couple of lines that are useless
in light of the fact that we aren't ever going to support this case. There
isn't much point in trying to make this work because a tuple Datum does
not carry many of the system columns. Per experimentation with a case
reported by Dean Rasheed; we'll have to fix his problem somewhere else.
deletion, so that we attempt to unlink the correct filepath. unlink()
errors are ignorable there, so lack of a DatabasePath initialization step
did not cause visible problems until a related bug showed up on Solaris.
Code refactored from xact_redo_commit() to
ProcessCommittedInvalidationMessages() in inval.c. Recovery may replay
shared invalidation messages for many databases, so we cannot
SetDatabasePath() once as we do in normal backends. Read the databaseid
from the shared invalidation messages, then set DatabasePath
temporarily before calling RelationCacheInitFileInvalidate().
Problem report by Robert Treat, analysis and fix by me.
someone else has just updated it, we have to set priorXmax to that tuple's
xmax (ie, the XID of the other xact that updated it) before looping back to
examine the next tuple. Obviously, the next tuple in the update chain should
have that XID as its xmin, not the same xmin as the preceding tuple that we
had been trying to lock. The mismatch would cause the EvalPlanQual logic to
decide that the tuple chain ended in a deletion, when actually there was a
live tuple that should have been found.
I inserted this error when recently adding logic to EvalPlanQual to make it
lock tuples before returning them (as opposed to the old method in which the
lock would occur much later, causing a great deal of work to be wasted if we
only then discover someone else updated it). Sigh. Per today's report from
Takahiro Itagaki of inconsistent results during pgbench runs.
of the string". The previous coding treated only -1 that way, and would
produce an invalid result value for other negative values.
We ought to fix it so that 2-parameter bit substring() is a different C
function and the 3-parameter form throws error for negative length, but
that takes a pg_proc change which is impractical in the back branches;
and in any case somebody might be relying on -1 working this way.
So just do this as a back-patchable fix.
It is absolutely not okay to throw an ereport(ERROR) in any random place in
the code just because DoingCommandRead is set; interrupting, say, OpenSSL
in the midst of its activities is guaranteed to result in heartache.
Instead of that, undo the original optimizations that threw away
QueryCancelPending anytime we were starting or finishing a command read, and
instead discard the cancel request within ProcessInterrupts if we find that
there is no HS reason for forcing a cancel and we are DoingCommandRead.
In passing, may I once again condemn the practice of changing the code
and not fixing the adjacent comment that you just turned into a lie?
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
Add missing varlena header to TableSpaceOpts structure. And, per
Tom Lane, instead of calling tablespace_reloptions in CacheMemoryContext,
call it in the caller's memory context and copy the value over
afterwards, to reduce the chances of a session-lifetime memory leak.
VACUUM FULL was renamed to VACUUM FULL INPLACE. Also added a new
option -i, --inplace for vacuumdb to perform FULL INPLACE vacuuming.
Since the new VACUUM FULL uses CLUSTER infrastructure, we cannot
use it for system tables. VACUUM FULL for system tables always
fall back into VACUUM FULL INPLACE silently.
Itagaki Takahiro, reviewed by Jeff Davis and Simon Riggs.
peculiar variant of UNION ALL, and so wouldn't likely get written directly
as-is, it's possible for it to arise as a result of simplification of
less-obviously-silly queries. In particular, now that we can do flattening
of subqueries that have constant outputs and are underneath an outer join,
it's possible for the case to result from simplification of queries of the
type exhibited in bug #5263. Back-patch to 8.4 to avoid a functionality
regression for this type of query.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
files when they haven't changed. This confuses make because the build fails
to update the file timestamps, and so it keeps on doing the action over again.
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
Tom Lane
Heikki Linnakangas
Teodor Sigaev
Simon Riggs
Bruce Momjian
Magnus Hagander
Robert Haas
Itagaki Takahiro