The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Revert ac22929a26, as well as the followup fix 113d3591b8. Because it broke
the assumption that the startup process waiting for the recovery conflict
on buffer pin should be waken up only by buffer unpin or the timeout enabled
in ResolveRecoveryConflictWithBufferPin(). It caused, for example,
SIGHUP signal handler or walreceiver process to wake that startup process
up unnecessarily frequently.
Additionally, add the comments about why that dedicated latch that
the reverted patch tried to get rid of should not be removed.
Thanks to Kyotaro Horiguchi for the discussion.
Author: Fujii Masao
Discussion: https://postgr.es/m/d8c0c608-021b-3c73-fffd-3240829ee986@oss.nttdata.com
This is done for end-of-recovery and shutdown checkpoints/restartpoints
(end-of-recovery restartpoints don't exist) rather than all types of
checkpoints, in cases where it may not be possible to rely on
pg_stat_activity to get a status from the startup or checkpointer
processes.
For example, at the end of a crash recovery, this is useful to know if a
checkpoint is running in the startup process, while previously the ps
display may only show some information about "recovering" something,
that can be confusing while a checkpoint runs.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kirk Jamison, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200818225238.GP17022@telsasoft.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Providing this information can be useful for example when diagnosing
problems related to recovery conflicts or for recovery issues without
having to go through the output generated by pg_waldump to get some
information about the blocks a WAL record works on.
The block information is printed in the same format as pg_waldump. This
already existed in xlog.c for debugging purposes with -DWAL_DEBUG, so
adding the block information in the callback has required just a small
refactoring.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/c31e2cba-efda-762c-f4ad-5c25e5dac3d0@amazon.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
Remove previous hack in KeepLogSeg that added a case to deal with a
(badly represented) invalid segment number. This was added for the sake
of GetWALAvailability. But it's not needed if in that function we
initialize the segment number to be retreated to the currently being
written segment, so do that instead.
Per valgrind-running buildfarm member skink, and some sparc64 animals.
Discussion: https://postgr.es/m/1724648.1594230917@sss.pgh.pa.us
Since slot_keep_segs indicates the number of WAL segments not LSN,
its datatype should not be XLogRecPtr.
Back-patch to v13 where this issue was added.
Reported-by: Atsushi Torikoshi
Author: Atsushi Torikoshi, tweaked by Fujii Masao
Discussion: https://postgr.es/m/ebd0d674f3e050222238a960cac5251a@oss.nttdata.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There is little point in using the LWLockRegisterTranche mechanism for
built-in tranche names. It wastes cycles, it creates opportunities for
bugs (since failing to register a tranche name is a very hard-to-detect
problem), and the lack of any centralized list of names encourages
sloppy nonconformity in name choices. Moreover, since we have a
centralized list of the tranches anyway in enum BuiltinTrancheIds, we're
certainly not buying any flexibility in return for these disadvantages.
Hence, nuke all the backend-internal LWLockRegisterTranche calls,
and instead provide a const array of the builtin tranche names.
(I have in mind to change a bunch of these names shortly, but this
patch is just about getting them into one place.)
Discussion: https://postgr.es/m/9056.1589419765@sss.pgh.pa.us
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
GetWalRcvWriteRecPtr() previously reported the latest *flushed*
location. Adopt the conventional terminology used elsewhere in the tree
by renaming it to GetWalRcvFlushRecPtr(), and likewise for some related
variables that used the term "received".
Add a new definition of GetWalRcvWriteRecPtr(), which returns the latest
*written* value. This will allow later patches to use the value for
non-data-integrity purposes, without having to wait for the flush
pointer to advance.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
When recovery target is reached and recovery is paused because of
recovery_target_action=pause, executing pg_wal_replay_resume() causes
the standby to promote, i.e., the recovery to end. So, in this case,
the previous message "Execute pg_wal_replay_resume() to continue"
logged was confusing because pg_wal_replay_resume() doesn't cause
the recovery to continue.
This commit improves the message logged when recovery is paused,
and the proper message is output based on what (pg_wal_replay_pause
or recovery_target_action) causes recovery to be paused.
Author: Sergei Kornilov, revised by Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/19168211580382043@myt5-b646bde4b8f3.qloud-c.yandex.net
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
This commit introduces new wait events BackupWaitWalArchive and
RecoveryPause. The former is reported while waiting for the WAL files
required for the backup to be successfully archived. The latter is
reported while waiting for recovery in pause state to be resumed.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Robert Haas
Discussion: https://postgr.es/m/f0651f8c-9c96-9f29-0ff9-80414a15308a@oss.nttdata.com
This commit renames RecoveryWalAll and RecoveryWalStream wait events to
RecoveryWalStream and RecoveryRetrieveRetryInterval, respectively,
in order to make the names and what they are more consistent. For example,
previously RecoveryWalAll was reported as a wait event while the recovery
was waiting for WAL from a stream, and which was confusing because the name
was very different from the situation where the wait actually could happen.
The names of macro variables for those wait events also are renamed
accordingly.
This commit also changes the category of RecoveryRetrieveRetryInterval to
Timeout from Activity because the wait event is reported while waiting based
on wal_retrieve_retry_interval.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Previously, hard links were not used on Windows and Cygwin, but they
support them just fine in currently supported OS versions, so we can
use them there as well.
Since all supported platforms now support hard links, we can remove
the alternative code paths.
Rename durable_link_or_rename() to durable_rename_excl() to make the
purpose more clear without referencing the implementation details.
Discussion: https://www.postgresql.org/message-id/flat/72fff73f-dc9c-4ef4-83e8-d2e60c98df48%402ndquadrant.com
This commit replaces 0 used as an initial value of XLogSource variable,
with XLOG_FROM_ANY. Also this commit changes those variable so that
XLogSource instead of int is used as the type for them. These changes
are for code readability and debugger-friendliness.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
At the end of recovery, standby mode is turned off to re-fetch the last
valid record from archive or pg_wal. Previously, if recovery target was
reached and standby mode was turned off while the current WAL source
was stream, recovery could try to retrieve WAL file containing the last
valid record unexpectedly from stream even though not in standby mode.
This caused an assertion failure. That is, the assertion test confirms that
WAL file should not be retrieved from stream if standby mode is not true.
This commit moves back the current WAL source to archive if it's stream
even though not in standby mode, to avoid that assertion failure.
This issue doesn't cause the server to crash when built with assertion
disabled. In this case, the attempt to retrieve WAL file from stream not
in standby mode just fails. And then recovery tries to retrieve WAL file
from archive or pg_wal.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
This changes the routines in charge of recycling WAL segments past the
last redo LSN to not use anymore "RedoRecPtr" as a local variable, which
is also available in the context of the session as a static declaration,
replacing it with "lastredoptr". This confusion has been introduced by
d9fadbf, so backpatch down to v11 like the other commit.
Thanks to Tom Lane, Robert Haas, Alvaro Herrera, Mark Dilger and Kyotaro
Horiguchi for the input provided.
Author: Ranier Vilela
Discussion: https://postgr.es/m/MN2PR18MB2927F7B5F690065E1194B258E35D0@MN2PR18MB2927.namprd18.prod.outlook.com
Backpatch-through: 11
recoveryDelayUntilTime was introduced by commit 36da3cfb45 as a global
because its method of operation was devilishly intrincate. Commit
c945af80cf removed all that complexity and could have turned it into a
local variable, but didn't. Do so now.
Discussion: https://postgr.es/m/20191213200751.GA10731@alvherre.pgsql
Reviewed-by: Michaël Paquier, Daniel Gustafsson
Error messages referring to incorrect WAL segment names could have been
generated for a fsync() failure or when creating a new segment at the
end of recovery.
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
In v11 or before, those settings could not take effect in crash recovery
because they are specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
those settings to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
restore_command and recovery_end_command settings.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit
2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
Instead of WAL-logging every modification during the build separately,
first build the index without any WAL-logging, and make a separate pass
through the index at the end, to write all pages to the WAL. This
significantly reduces the amount of WAL generated, and is usually also
faster, despite the extra I/O needed for the extra scan through the index.
WAL generated this way is also faster to replay.
For GiST, the LSN-NSN interlock makes this a little tricky. All pages must
be marked with a valid (i.e. non-zero) LSN, so that the parent-child
LSN-NSN interlock works correctly. We now use magic value 1 for that during
index build. Change the fake LSN counter to begin from 1000, so that 1 is
safely smaller than any real or fake LSN. 2 would've been enough for our
purposes, but let's reserve a bigger range, in case we need more special
values in the future.
Author: Anastasia Lubennikova, Andrey V. Lepikhov
Reviewed-by: Heikki Linnakangas, Dmitry Dolgov
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Especially, warn about the hazards of mishandling the backup_label
file. Adjust a couple of server messages to be more clear about
the hazards associated with removing backup_label files, too.
David Steele and Robert Haas, reviewed by Laurenz Albe, Martín
Marqués, Peter Eisentraut, and Magnus Hagander.
Discussion: http://postgr.es/m/7d85c387-000e-16f0-e00b-50bf83c22127@pgmasters.net
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
ce6afc6 has begun the refactoring work by plugging pg_rewind into a
central routine to update the control file, and left around two extra
copies, with one in xlog.c for the backend and one in pg_resetwal.c. By
adding an extra option to the central routine in controldata_utils.c to
control if a flush of the control file needs to be done, it is proving
to be straight-forward to make xlog.c and pg_resetwal.c use the central
code path at the condition of moving the wait event tracking there.
Hence, this allows to have only one central code path to update the
control file, shaving the code from the duplicates.
This refactoring actually fixes a problem in pg_resetwal. Previously,
the control file was first removed before being recreated. So if a
crash happened between the moment the file was removed and the moment
the file was created, then it would have been possible to not have a
control file anymore in the database folder.
Author: Fabien Coelho
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903170935210.2506@lancre
93473c6 has removed openLogOff, changing on the way the error message
which is used to report partial writes to WAL segments. The
newly-introduced error message used the offset up to which the write has
happened, keeping always the same total length to write. This changes
the error message so as the number of bytes left to write are reported.
Reported-by: Michael Paquier
Author: Robert Haas
Discussion: https://postgr.es/m/20190306235251.GA17293@paquier.xyz
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
A timeout of 5s is used when waiting for WAL to become available at
recovery so as the startup process is able to react promptly if a
trigger file shows up. However this missed the fact that the startup
process also relies on the timeout to check periodically the status of
any active WAL receiver.
Discussion: https://postgr.es/m/20190131070956.GE13429@paquier.xyz
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
The function name pg_stop_backup() has been included for ages in some
log messages when stopping the backup, which is confusing for base
backups taken with the replication protocol because this function is
never called. Some other comments and messages in this area are
improved while on it.
The new wording is based on input and suggestions from several people,
all listed below.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20181221040510.GA12599@paquier.xyz
While it seems OK to not be concerned about fsync() failure for a
pre-existing signal file, it's not OK to not even check for open()
failure. This at least causes complaints from static analyzers,
and I think on some platforms passing -1 to fsync() or close() might
trigger assertion-type failures. Also add (void) casts to make clear
that we're ignoring fsync's result intentionally.
Oversights in commit 2dedf4d9a, noted by Coverity.
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
When reading a WAL record, its contents are copied into an intermediate
buffer. However, doing so is not necessary if the record fits fully
into the current page, saving one memcpy for each such record. The
allocation handling of the intermediate buffer is also now done only
when a record crosses a page boundary, shaving some extra cycles when
reading a WAL record.
Author: Andrey Lepikhov
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas
Discussion: https://postgr.es/m/c2ea54dd-a1d3-80eb-ddbf-7e6f258e615e@postgrespro.ru
This function is able to promote a standby with this new SQL-callable
function. Execution access can be granted to non-superusers so that
failover tools can observe the principle of least privilege.
Catalog version is bumped.
Author: Laurenz Albe
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6e7c79b3ec916cf49742fb8849ed17cd87aed620.camel@cybertec.at
When the checkpointer receives a SIGHUP signal to update its configuration,
it may need to update the shared memory for full_page_writes and need to
write a WAL record for it. Now, it is quite possible that the XLOG
machinery has not been initialized by that time and it will lead to
assertion failure while doing that. Fix is to allow the initialization of
the XLOG machinery outside critical section.
This bug has been introduced by the commit 2c03216d83 which added the XLOG
machinery initialization in RecoveryInProgress code path.
Reported-by: Dilip Kumar
Author: Dilip Kumar
Reviewed-by: Michael Paquier and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAFiTN-u4BA8KXcQUWDPNgaKAjDXC=C2whnzBM8TAcv=stckYUw@mail.gmail.com
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
XLogInsert fails to attach a required FPI to the first record after
full_page_writes is turned on by the last checkpoint. This bug got
introduced in 9.5 due to code rearrangement in commits 2c03216d83 and
2076db2aea. Fix it by ensuring that XLogInsertRecord performs a
recomputation when the given record is generated with FPW as off but
found that the flag has been turned on while actually inserting the
record.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila
Backpatch-through: 9.5 where this problem was introduced
Discussion: https://postgr.es/m/20180420.151043.74298611.horiguchi.kyotaro@lab.ntt.co.jp
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Startup process has improved its calculation of incorrect minimum
consistent point in 8d68ee6, which ensures that all WAL available gets
replayed when doing crash recovery, and has introduced an incorrect
calculation of the minimum recovery point for non-startup processes,
which can cause incorrect page references on a standby when for example
the background writer flushed a couple of pages on-disk but was not
updating the control file to let a subsequent crash recovery replay to
where it should have.
The only case where this has been reported to be a problem is when a
standby needs to calculate the latest removed xid when replaying a btree
deletion record, so one would need connections on a standby that happen
just after recovery has thought it reached a consistent point. Using a
background worker which is started after the consistent point is reached
would be the easiest way to get into problems if it connects to a
database. Having clients which attempt to connect periodically could
also be a problem, but the odds of seeing this problem are much lower.
The fix used is pretty simple, as the idea is to give access to the
minimum recovery point written in the control file to non-startup
processes so as they use a reference, while the startup process still
initializes its own references of the minimum consistent point so as the
original problem with incorrect page references happening post-promotion
with a crash do not show up.
Reported-by: Alexander Kukushkin
Diagnosed-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Alexander Kukushkin
Discussion: https://postgr.es/m/153492341830.1368.3936905691758473953@wrigleys.postgresql.org
Backpatch-through: 9.3
Commit 4b0d28de06 has removed the prior checkpoint and related
facilities but has left WAL recycling based on the LSN of the prior
checkpoint, which causes incorrect calculations for WAL removal and
recycling for max_wal_size and min_wal_size. This commit changes things
so as the base calculation point is the last checkpoint generated.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20180723.135748.42558387.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch: 11-, where the prior checkpoint has been removed.
Those would use the default ERRCODE_INTERNAL_ERROR, but for foreseeable
failures an errcode ought to be set, ERRCODE_DATA_CORRUPTED making the
most sense here.
While on the way, fix one errcode_for_file_access missing in origin.c
since the code has been created, and remove one assignment of errno to 0
before calling read(), as this was around to fit with what was present
before 811b6e36 where errno would not be set when not enough bytes are
read. I have noticed the first one, and Tom has pinged me about the
second one.
Author: Michael Paquier
Reported-by: Tom Lane
Discussion: https://postgr.es/m/27265.1531925836@sss.pgh.pa.us
Some error messages which report something about a file operation use
as well context which is already provided within the path being worked
on, making things rather duplicated. This creates more work for
translators, and does not actually bring clarity.
More could be done, however in a lot of cases the context used is
actually useful, still that patch gets down things with a good cut.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/20180718044711.GA8565@paquier.xyz
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Temporary WAL segments are created in pg_wal and named as xlogtemp.pid
before being renamed to the real deal when creating a new segment. If
an instance crashes after the temporary segment is created and before
the rename is done, then the server would finish with unremovable data.
After an instance crash, scan pg_wal and remove any such segments. With
repetitive unlucky crashes this would contribute to disk bloat and
presents risks of ENOSPC especially with max_wal_size close to the
maximum allowed.
Author: Michael Paquier
Reviewed-by: Yugo Nagata, Heikki Linnakangas
Discussion: https://postgr.es/m/20180514054955.GF1528@paquier.xyz
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
When pg_control was first designed, sizeof(ControlFileData) was small
enough that a comment seemed like plenty to document the assumption that
it'd fit into one disk sector. Now it's nearly 300 bytes, raising the
possibility that somebody would carelessly add enough stuff to create
a problem. Let's add a StaticAssertStmt() to ensure that the situation
doesn't pass unnoticed if it ever occurs.
While at it, rename PG_CONTROL_SIZE to PG_CONTROL_FILE_SIZE to make it
clearer what that symbol means, and convert the existing runtime
comparisons of sizeof(ControlFileData) vs. PG_CONTROL_FILE_SIZE to be
static asserts --- we didn't have that technology when this code was
first written.
Discussion: https://postgr.es/m/9192.1500490591@sss.pgh.pa.us
When promoting a standby just after a XLOG_SWITCH record was replayed,
and next segment(s) are already are locally available (via walsender,
restore_command + trigger/recovery target), that segment could
accidentally be recycled onto the past of the new timeline. Later
checkpointer would create a .ready file for it, assuming there was an
error during creation, and it would get archived. That causes trouble
if another standby is later brought up from a basebackup from before
the timeline creation, because it would try to read the
segment, because XLogFileReadAnyTLI just tries all possible timelines,
which doesn't have valid contents. Thus replay would fail.
The problem, if already occurred, can be fixed by removing the segment
and/or having restore_command filter it out.
The reason for the creation of such "phantom" segments was, that after
an XLOG_SWITCH record the EndOfLog variable points to the beginning of
the next segment, and RemoveXlogFile() used XLByteToPrevSeg().
Normally RemoveXlogFile() doing so is harmless, because the last
segment will still exist preventing InstallXLogFileSegment() from
causing harm, but just after promotion there's no previous segment on
the new timeline.
Fix that by using XLByteToSeg() instead of XLByteToPrevSeg().
Author: Andres Freund
Reported-By: Greg Burek
Discussion: https://postgr.es/m/20170619073026.zcwpe6mydsaz5ygd@alap3.anarazel.de
Backpatch: 9.2-, bug older than all supported versions
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and
throws a PANIC if so. At that point, only walsenders are still
active, so one might think this could not happen, but walsenders can
also generate WAL, for instance in BASE_BACKUP and logical decoding
related commands (e.g. via hint bits). So they can trigger this panic
if such a command is run while the shutdown checkpoint is being
written.
To fix this, divide the walsender shutdown into two phases. First,
checkpointer, itself triggered by postmaster, sends a
PROCSIG_WALSND_INIT_STOPPING signal to all walsenders. If the backend
is idle or runs an SQL query this causes the backend to shutdown, if
logical replication is in progress all existing WAL records are
processed followed by a shutdown. Otherwise this causes the walsender
to switch to the "stopping" state. In this state, the walsender will
reject any further replication commands. The checkpointer begins the
shutdown checkpoint once all walsenders are confirmed as
stopping. When the shutdown checkpoint finishes, the postmaster sends
us SIGUSR2. This instructs walsender to send any outstanding WAL,
including the shutdown checkpoint record, wait for it to be replicated
to the standby, and then exit.
Author: Andres Freund, based on an earlier patch by Michael Paquier
Reported-By: Fujii Masao, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Backpatch: 9.4, where logical decoding was introduced
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
2PC state info held in shmem at PREPARE, then cleaned at COMMIT PREPARED/ABORT PREPARED,
avoiding writing/fsyncing any state information to disk in the normal path, greatly enhancing replay speed.
Prepared transactions that live past one checkpoint redo horizon will be written to disk as now.
Similar conceptually to 978b2f65aa and building upon
the infrastructure created by that commit.
Authors, in equal measure: Stas Kelvich, Nikhil Sontakke and Michael Paquier
Discussion: https://postgr.es/m/CAMGcDxf8Bn9ZPBBJZba9wiyQq-Qk5uqq=VjoMnRnW5s+fKST3w@mail.gmail.com
We were assigning values near 255 through "char *" pointers. On machines
where char is signed, that's not entirely kosher, and it's reasonable
for compilers to warn about it.
A better solution would be to change the pointer type to "unsigned char *",
but that would be vastly more invasive. For the moment, let's just apply
this simple backpatchable solution.
Aleksander Alekseev
Discussion: https://postgr.es/m/20170220141239.GD12278@e733.localdomain
Discussion: https://postgr.es/m/2839.1490714708@sss.pgh.pa.us
If file was created/deleted just before powerloss it's possible that
file system will miss that. To prevent it, call fsync() where creating/
unlinkg file is critical.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat, Takayuki Tsunakawa, me
Assert-enabled build crashes but without asserts it works by wrong way:
it may not reset forcing full page write and preventing from starting
exclusive backup with the same name as cancelled.
Patch replaces pair of booleans
nonexclusive_backup_running/exclusive_backup_running to single enum to
correctly describe backup state.
Backpatch to 9.6 where bug was introduced
Reported-by: David Steele
Authors: Michael Paquier, David Steele
Reviewed-by: Anastasia Lubennikova
https://commitfest.postgresql.org/13/1068/
This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
Adds write_lag, flush_lag and replay_lag cols to pg_stat_replication.
Implements a lag tracker module that reports the lag times based upon
measurements of the time taken for recent WAL to be written, flushed and
replayed and for the sender to hear about it. These times
represent the commit lag that was (or would have been) introduced by each
synchronous commit level, if the remote server was configured as a
synchronous standby. For an asynchronous standby, the replay_lag column
approximates the delay before recent transactions became visible to queries.
If the standby server has entirely caught up with the sending server and
there is no more WAL activity, the most recently measured lag times will
continue to be displayed for a short time and then show NULL.
Physical replication lag tracking is automatic. Logical replication tracking
is possible but is the responsibility of the logical decoding plugin.
Tracking is a private module operating within each walsender individually,
with values reported to shared memory. Module not used outside of walsender.
Design and code is good enough now to commit - kudos to the author.
In many ways a difficult topic, with important and subtle behaviour so this
shoudl be expected to generate discussion and multiple open items: Test now!
Author: Thomas Munro, following designs by Fujii Masao and Simon Riggs
Review: Simon Riggs, Ian Barwick and Craig Ringer
Internally, we have supported the option to either wait for all of the
WAL associated with a backup to be archived, or to return immediately.
This option is useful to users of pg_stop_backup() as well, when they
are reading the stop backup record position and checking that the WAL
they need has been archived independently.
This patch adds an additional, optional, argument to pg_stop_backup()
which allows the user to indicate if they wish to wait for the WAL to be
archived or not. The default matches current behavior, which is to
wait.
Author: David Steele, with some minor changes, doc updates by me.
Reviewed by: Takayuki Tsunakawa, Fujii Masao
Discussion: https://postgr.es/m/758e3fd1-45b4-5e28-75cd-e9e7f93a4c02@pgmasters.net
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
The original messaging design, introduced in commit 068cfadf9, seems too
chatty now that some time has elapsed since the bug fix; most installations
will be in good shape and don't really need a reminder about this on every
postmaster start.
Hence, arrange to suppress the "wraparound protections are now enabled"
message during startup (specifically, during the TrimMultiXact() call).
The message will still appear if protection becomes effective at some
later point.
Discussion: https://postgr.es/m/17211.1489189214@sss.pgh.pa.us
Bruce Momjian
Michael Paquier
Fujii Masao
Peter Eisentraut
Tom Lane
Thomas Munro
David Rowley
Andres Freund
Alvaro Herrera
Amit Kapila
Robert Haas
Alexander Korotkov
Heikki Linnakangas
Peter Eisentraut
Andrew Dunstan
Magnus Hagander
Stephen Frost
Simon Riggs
Teodor Sigaev