Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
Per discussion, this seems important for plans involving writable CTEs,
since there can now be more than one ModifyTable node in the plan.
To retain the same formatting as for target tables of scan nodes, we
show only one target table, which will be the parent table in case of
an UPDATE or DELETE on an inheritance tree. Individual child tables
can be determined by inspecting the child plan trees if needed.
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
rather than just $N. This brings the display of nestloop-inner-indexscan
plans back to where it's been, and incidentally improves the display of
SubPlan parameters as well. In passing, simplify the EXPLAIN code by
having it deal primarily in the PlanState tree rather than separately
searching Plan and PlanState trees. This is noticeably cleaner for
subplans, and about a wash elsewhere.
One small difference from previous behavior is that EXPLAIN will no longer
qualify local variable references in inner-indexscan plan nodes, since it
no longer sees such nodes as possibly referencing multiple tables. Vars
referenced through PARAM_EXEC Params are still forcibly qualified, though,
so I don't think the display is any more confusing than before. Adjust a
couple of examples in the documentation to match this behavior.
While my previous attempt seems to always produce valid YAML, it
doesn't always produce YAML that means what it appears to mean,
because of tokens like "0xa" and "true", which without quotes will
be interpreted as integer or Boolean literals. So, instead, just
quote everything that's not known to be a number, as we do for
JSON.
Dean Rasheed, with some changes to the comments by me.
The previous code failed to quote in many cases where quoting was necessary -
YAML has loads of special characters, including -:[]{},"'|*& - so quote much
more aggressively, and only refrain from quoting things where it seems fairly
clear that it isn't necessary.
Per report from Dean Rasheed.
We show the number of buckets, the number of batches (and also the original
number if it has changed), and the peak space used by the hash table. Minor
executor changes to track peak space used.
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
ExplainSeparatePlans() was busted for both JSON and YAML output - the present
code is a holdover from the original version of my machine-readable explain
patch, which didn't have the grouping_stack machinery. Also, fix an odd
distribution of labor between ExplainBeginGroup() and ExplainYAMLLineStarting()
when marking lists with "- ", with each providing one character. This broke
the output format for multi-query statements. Also, fix ExplainDummyGroup()
for the YAML output format.
Along the way, make the YAML format use escape_yaml() in situations where the
JSON format uses escape_json(). Right now, it doesn't matter because all the
values are known not to need escaping, but it seems safer this way. Finally,
I added some comments to better explain what the YAML output format is doing.
Greg Sabino Mullane reported the issues with multi-query statements.
Analysis and remaining cleanups by me.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
Without these functions, anyone outside of explain.c can't actually use
ExplainPrintPlan, because the ExplainState won't be initialized properly.
The user-visible result of this was a crash when using auto_explain with
the JSON output format.
Report by Euler Taveira de Oliveira. Analysis by Tom Lane. Patch by me.
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This is believed to not change the output at all, with one known exception:
"Subquery Scan foo" becomes "Subquery Scan on foo". (We can fix that if
anyone complains, but it would be a wart, because the old code was clearly
inconsistent.) The main intention is to remove duplicate coding and
provide a cleaner base for subsequent EXPLAIN patching.
Robert Haas
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
practically free given prior 8.4 changes in plancache and portal management,
and it makes it a lot easier for ExecutorStart/Run/End hooks to get at the
query text. Extracted from Itagaki Takahiro's pg_stat_statements patch,
with minor editorialization.
* Refactor explain.c slightly to export a convenient-to-use subroutine
for printing EXPLAIN results.
* Provide hooks for plugins to get control at ExecutorStart and ExecutorEnd
as well as ExecutorRun.
* Add some minimal support for tracking the total runtime of ExecutorRun.
This code won't actually do anything unless a plugin prods it to.
* Change the API of the DefineCustomXXXVariable functions to allow nonzero
"flags" to be specified for a custom GUC variable. While at it, also make
the "bootstrap" default value for custom GUCs be explicitly specified as a
parameter to these functions. This is to eliminate confusion over where the
default comes from, as has been expressed in the past by some users of the
custom-variable facility.
* Refactor GUC code a bit to ensure that a custom variable gets initialized to
something valid (like its default value) even if the placeholder value was
invalid.
get_name_for_var_field didn't have enough context to interpret a reference to
a CTE query's output. Fixing this requires separate hacks for the regular
deparse case (pg_get_ruledef) and for the EXPLAIN case, since the available
context information is quite different. It's pretty nearly parallel to the
existing code for SUBQUERY RTEs, though. Also, add code to make sure we
qualify a relation name that matches a CTE name; else the CTE will mistakenly
capture the reference when reloading the rule.
In passing, fix a pre-existing problem with get_name_for_var_field not working
on variables in targetlists of SubqueryScan plan nodes. Although latent all
along, this wasn't a problem until we made EXPLAIN VERBOSE try to print
targetlists. To do this, refactor the deparse_context_for_plan API so that
the special case for SubqueryScan is all on ruleutils.c's side.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
debug_print_plan to appear at LOG message level, not DEBUG1 as historically.
Make debug_pretty_print default to on. Also, cause plans generated via
EXPLAIN to be subject to debug_print_plan. This is all to make
debug_print_plan a reasonably comfortable substitute for the former behavior
of EXPLAIN VERBOSE.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
of each plan node. For the moment this is debug support only and is
not enabled unless EXPLAIN_PRINT_TLISTS is defined at build time.
Later I'll see about the idea of letting EXPLAIN VERBOSE do it.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
are not one of the query's defined result relations, but nonetheless have
triggers fired against them while the query is active. This was formerly
impossible but can now occur because of my recent patch to fix the firing
order for RI triggers. Caching a ResultRelInfo avoids duplicating work by
repeatedly opening and closing the same relation, and also allows EXPLAIN
ANALYZE to "see" and report on these extra triggers. Use the same mechanism
to cache open relations when firing deferred triggers at transaction shutdown;
this replaces the former one-element-cache strategy used in that case, and
should improve performance a bit when there are deferred triggers on a number
of relations.
and/or create plans for hypothetical situations; in particular, investigate
plans that would be generated using hypothetical indexes. This is a
heavily-rewritten version of the hooks proposed by Gurjeet Singh for his
Index Advisor project. In this formulation, the index advisor can be
entirely a loadable module instead of requiring a significant part to be
in the core backend, and plans can be generated for hypothetical indexes
without requiring the creation and rolling-back of system catalog entries.
The index advisor patch as-submitted is not compatible with these hooks,
but it needs significant work anyway due to other 8.2-to-8.3 planner
changes. With these hooks in the core backend, development of the advisor
can proceed as a pgfoundry project.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
drill down into subplan targetlists to print the referent expression for an
OUTER or INNER var in an upper plan node. Hence, make it do that always, and
banish the old hack of showing "?columnN?" when things got too complicated.
Along the way, fix an EXPLAIN bug I introduced by suppressing subqueries from
execution-time range tables: get_name_for_var_field() assumed it could look at
rte->subquery to find out the real type of a RECORD var. That doesn't work
anymore, but instead we can look at the input plan of the SubqueryScan plan
node.
and quals have varno OUTER, rather than zero, to indicate a reference to
an output of their lefttree subplan. This is consistent with the way
that every other upper-level node type does it, and allows some simplifications
in setrefs.c and EXPLAIN.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
plan nodes, so that the executor does not need to get these items from
the range table at runtime. This will avoid needing to include these
fields in the compact range table I'm expecting to make the executor use.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
that has parameters is always planned afresh for each Bind command,
treating the parameter values as constants in the planner. This removes
the performance penalty formerly often paid for using out-of-line
parameters --- with this definition, the planner can do constant folding,
LIKE optimization, etc. After a suggestion by Andrew@supernews.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
when trying to locate the referent of a RECORD variable. This fixes the
'record type has not been registered' failure reported by Stefan
Kaltenbrunner about a month ago. A side effect of the way I chose to
fix it is that most variable references in join conditions will now be
properly labeled with the variable's source table name, instead of the
not-too-helpful 'outer' or 'inner' we used to use.
are unnecessarily allocated on the heap rather than the stack. If the
StringInfo doesn't outlive the stack frame in which it is created,
there is no need to allocate it on the heap via makeStringInfo() --
stack allocation is faster. While it's not a big deal unless the
code is in a critical path, I don't see a reason not to save a few
cycles -- using stack allocation is not less readable.
I also cleaned up a bit of code along the way: moved variable
declarations into a more tightly-enclosing scope where possible,
fixed some pointless copying of strings in dblink, etc.
bits indicating which optional capabilities can actually be exercised
at runtime. This will allow Sort and Material nodes, and perhaps later
other nodes, to avoid unnecessary overhead in common cases.
This commit just adds the infrastructure and arranges to pass the correct
flag values down to plan nodes; none of the actual optimizations are here
yet. I'm committing this separately in case anyone wants to measure the
added overhead. (It should be negligible.)
Simon Riggs and Tom Lane
relations: fix the executor so that we can have an Append plan on the
inside of a nestloop and still pass down outer index keys to index scans
within the Append, then generate such plans as if they were regular
inner indexscans. This avoids the need to evaluate the outer relation
multiple times.
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
properly advancing the CommandCounter between multiple sub-queries
generated by rules, we forgot to update the snapshot being used, so
that the successive sub-queries didn't actually see each others'
results. This is still not *exactly* like the semantics of normal
execution of the same queries, in that we don't take new transaction
snapshots and hence don't see changes from concurrently committed
commands, but I think that's OK and probably even preferable for
EXPLAIN ANALYZE.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
return just a single tuple at a time. Currently the only such node
type is Hash, but I expect we will soon have indexscans that can return
tuple bitmaps. A side benefit is that EXPLAIN ANALYZE now shows the
correct tuple count for a Hash node.
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
had to do in DECLARE CURSOR. AFAICS these are all the places affected.
PREPARE case per example from Michael Fuhr, EXPLAIN case located by
grepping for planner calls ...
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
node now does its own grouping of the input rows, and has no need for a
preceding GROUP node in the plan pipeline. This allows elimination of
the misnamed tuplePerGroup option for GROUP, and actually saves more code
in nodeGroup.c than it costs in nodeAgg.c, as well as being presumably
faster. Restructure the API of query_planner so that we do not commit to
using a sorted or unsorted plan in query_planner; instead grouping_planner
makes the decision. (Right now it isn't any smarter than query_planner
was, but that will change as soon as it has the option to select a hash-
based aggregation step.) Despite all the hackery, no initdb needed since
only in-memory node types changed.
ANALYZE is not quite clear when branches of the query are never
executed. So this tiny patch fixes that.
The patch is attached and can also be found at:
http://svana.org/kleptog/pgsql/pgsql-explain.patch
Martijn van Oosterhout
ruleutils display is not such a great idea. For arguments of functions
and operators I think we'd better keep the historical behavior of showing
such casts explicitly, to ensure that the function/operator is reparsed
the same way when the rule is reloaded. This also makes the output of
EXPLAIN less obscurantist about exactly what's happening.
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
> submitted on July 9:
>
> http://archives.postgresql.org/pgsql-patches/2002-07/msg00056.php
>
> Please disregard that one *if* this one is applied. If this one is
> rejected please go ahead with the July 9th patch.
The July 9th Table Function API patch mentioned above is now in CVS, so
here is an updated version of the guc patch which should apply cleanly
against CVS tip.
Joe Conway
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
now has an RTE of its own, and references to its outputs now are Vars
referencing the JOIN RTE, rather than CASE-expressions. This allows
reverse-listing in ruleutils.c to use the correct alias easily, rather
than painfully reverse-engineering the alias namespace as it used to do.
Also, nested FULL JOINs work correctly, because the result of the inner
joins are simple Vars that the planner can cope with. This fixes a bug
reported a couple times now, notably by Tatsuo on 18-Nov-01. The alias
Vars are expanded into COALESCE expressions where needed at the very end
of planning, rather than during parsing.
Also, beginnings of support for showing plan qualifier expressions in
EXPLAIN. There are probably still cases that need work.
initdb forced due to change of stored-rule representation.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
joins, and clean things up a good deal at the same time. Append plan node
no longer hacks on rangetable at runtime --- instead, all child tables are
given their own RT entries during planning. Concept of multiple target
tables pushed up into execMain, replacing bug-prone implementation within
nodeAppend. Planner now supports generating Append plans for inheritance
sets either at the top of the plan (the old way) or at the bottom. Expanding
at the bottom is appropriate for tables used as sources, since they may
appear inside an outer join; but we must still expand at the top when the
target of an UPDATE or DELETE is an inheritance set, because we actually need
a different targetlist and junkfilter for each target table in that case.
Fortunately a target table can't be inside an outer join... Bizarre mutual
recursion between union_planner and prepunion.c is gone --- in fact,
union_planner doesn't really have much to do with union queries anymore,
so I renamed it grouping_planner.
ExecutorRun. This allows LIMIT to work in a view. Also, LIMIT in a
cursor declaration will behave in a reasonable fashion, whereas before
it was overridden by the FETCH count.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
This change seems necessary in conjunction with long queries, and it
cleans up some bogosity in connection with long EXPLAIN texts anyway.
Note that current libpq will accept any length error message (at least
until it runs out of memory); prior versions have a limit of 8K, but
will cleanly discard excess error text, so there shouldn't be any
big compatibility problems with old clients.
> >
> > was implemented by Jan Wieck.
> > His work is for ascending order cases.
> >
> > Here is a patch to prevent sorting also in descending
> > order cases.
> > Because I had already changed _bt_first() to position
> > backward correctly before v6.5,this patch would work.
> >
Hiroshi Inoue
Inoue@tpf.co.jp
can be generated in a buffer and then sent to the frontend in a single
libpq call. This solves problems with NOTICE and ERROR messages generated
in the middle of a data message or COPY OUT operation.
where you state a format and arguments. the old behavior required
each appendStringInfo to have to have a sprintf() before it if any
formatting was required.
Also shortened several instances where there were multiple appendStringInfo()
calls in a row, doing nothing more then adding one more word to the String,
instead of doing them all in one call.
a backend core dump, because it was concatenating a potentially long
string onto another string that didn't necessarily have enough room.
Shame, shame.
Fixes a bug in the rule system that caused a crashing
backend when a join-view with calculated column is used
in subselect.
Modifies EXPLAIN to explain rewritten queries instead of
the plain SeqScan on a view. Rules can produce very deep
MORE
Jan.
Robert Haas
Andrew Dunstan
Bruce Momjian
Tom Lane
Alvaro Herrera
Peter Eisentraut
Magnus Hagander
Greg Stark
Joe Conway
Neil Conway
PostgreSQL Daemon
Thomas G. Lockhart
Jan Wieck
Marc G. Fournier
Vadim B. Mikheev