"relkind" normally refers to the char field from pg_class. However, in
the parse nodes AlterTableStmt and CreateTableAsStmt, "relkind" was used
for a field of type enum ObjectType, that could refer to other object
types than those possible for a relkind. Such fields being usually
named "objtype", switch the name in both structures to make things more
consistent. Note that this led to some confusion in functions that
also operate on a RangeTableEntry object, which also has a field named
"relkind".
This naming goes back to commit 09d4e96, where only OBJECT_TABLE and
OBJECT_INDEX were used. This got extended later to use as well
OBJECT_TYPE with e440e12, not really a relation kind.
Author: Mark Dilger
Reviewed-by: Daniel Gustafsson, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/609181AE-E399-47C7-9221-856E0F96BF93@enterprisedb.com
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE was used in an ereport with the
same message but different errdetail a few lines earlier, so use that
here as well.
Backpatch-through: 11
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
This Assert was trying to ensure that the number of columns in the foreign
key being cloned was the same number of attributes in the parentRel. Of
course, it's perfectly valid to have columns in the table which are not
part of the foreign key constraint. It appears that this Assert was
misunderstanding that.
Reported-by: Rajkumar Raghuwanshi
Reviewed-by: amul sul
Discussion: https://postgr.es/m/CAKcux6=z1dtiWw5BOpqDx-U6KTiq+zD0Y2m810zUtWL+giVXWA@mail.gmail.com
When a partition is detached, any triggers that had been cloned from its
parent were not properly disentangled from its parent triggers.
This resulted in triggers that could not be dropped because they
depended on the trigger in the trigger in the no-longer-parent table:
ALTER TABLE t DETACH PARTITION t1;
DROP TRIGGER trig ON t1;
ERROR: cannot drop trigger trig on table t1 because trigger trig on table t requires it
HINT: You can drop trigger trig on table t instead.
Moreover the table can no longer be re-attached to its parent, because
the trigger name is already taken:
ALTER TABLE t ATTACH PARTITION t1 FOR VALUES FROM (1)TO(2);
ERROR: trigger "trig" for relation "t1" already exists
The former is a bug introduced in commit 86f575948c. (The latter is
not necessarily a bug, but it makes the bug more uncomfortable.)
To avoid the complexity that would be needed to tell whether the trigger
has a local definition that has to be merged with the one coming from
the parent table, establish the behavior that the trigger is removed
when the table is detached.
Backpatch to pg11.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/20200408152412.GZ2228@telsasoft.com
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
All errors of SQLSTATE class 23 should include the name of an object
associated with the error in separate fields of the error report message.
We do this so that applications need not try to extract them from the
possibly-localized human-readable text of the message.
Reported-by: Chris Bandy
Author: Chris Bandy
Reviewed-by: Amit Kapila and Amit Langote
Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
If an index was explicitly set as replica identity index, this setting
was lost when a table was rewritten by ALTER TABLE. Because this
setting is part of pg_index but actually controlled by ALTER
TABLE (not part of CREATE INDEX, say), we have to do some extra work
to restore it.
Based-on-patch-by: Quan Zongliang <quanzongliang@gmail.com>
Reviewed-by: Euler Taveira <euler.taveira@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c70fcab2-4866-0d9f-1d01-e75e189db342@gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
On a multi-level partioned table, when adding a partition not directly
connected to the root table, foreign key constraints referencing the
root were not cloned to the new partition, leading to the FK being
possibly inadvertently violated later on.
This was caused by fuzzy thinking in CloneFkReferenced (commit
f56f8f8da6): it was skipping constraints marked as having parents on
the theory that cloning those would create duplicates; but that's only
correct for the top level of the partitioning hierarchy. For levels
below that one, such constraints must still be considered and only
skipped if later on we see that we'd create duplicates. Apparently, I
(Álvaro) wrote the comments right but the code implemented something
slightly different.
Author: Jehan-Guillaume de Rorthais
Discussion: https://postgr.es/m/20200206004948.238352db@firost
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Previously, TRUNCATE command through a parent table checked the
permissions on not only the parent table but also the children tables
inherited from it. This was a bug and inherited queries should perform
access permission checks on the parent table only. This commit fixes
that bug.
Back-patch to all supported branches.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwFHdSvifhJE+-GSNqUHSfbiKxaeQQ7HGcYz6SC2n_oDcg@mail.gmail.com
This gives more information to the user about the error and it makes such
messages consistent with the other similar messages in the code.
Reported-by: Simon Riggs
Author: Mahendra Singh and Simon Riggs
Reviewed-by: Beena Emerson and Amit Kapila
Discussion: https://postgr.es/m/CANP8+j+7YUvQvGxTrCiw77R23enMJ7DFmyA3buR+fa2pKs4XhA@mail.gmail.com
Attempting to use CREATE INDEX, DROP INDEX or REINDEX with CONCURRENTLY
on a temporary relation with ON COMMIT actions triggered unexpected
errors because those operations use multiple transactions internally to
complete their work. Here is for example one confusing error when using
ON COMMIT DELETE ROWS:
ERROR: index "foo" already contains data
Issues related to temporary relations and concurrent indexing are fixed
in this commit by enforcing the non-concurrent path to be taken for
temporary relations even if using CONCURRENTLY, transparently to the
user. Using a non-concurrent path does not matter in practice as locks
cannot be taken on a temporary relation by a session different than the
one owning the relation, and the non-concurrent operation is more
effective.
The problem exists with REINDEX since v12 with the introduction of
CONCURRENTLY, and with CREATE/DROP INDEX since CONCURRENTLY exists for
those commands. In all supported versions, this caused only confusing
error messages to be generated. Note that with REINDEX, it was also
possible to issue a REINDEX CONCURRENTLY for a temporary relation owned
by a different session, leading to a server crash.
The idea to enforce transparently the non-concurrent code path for
temporary relations comes originally from Andres Freund.
Reported-by: Manuel Rigger
Author: Michael Paquier, Heikki Linnakangas
Reviewed-by: Andres Freund, Álvaro Herrera, Heikki Linnakangas
Discussion: https://postgr.es/m/CA+u7OA6gP7YAeCguyseusYcc=uR8+ypjCcgDDCTzjQ+k6S9ksQ@mail.gmail.com
Backpatch-through: 9.4
The behavior of something like
ALTER TABLE transactions
ADD COLUMN status varchar(30) DEFAULT 'old',
ALTER COLUMN status SET default 'current';
is to fill existing table rows with 'old', not 'current'. That's
intentional and desirable for a couple of reasons:
* It makes the behavior the same whether you merge the sub-commands
into one ALTER command or give them separately;
* If we applied the new default while filling the table, there would
be no way to get the existing behavior in one SQL command.
The same reasoning applies in cases that add a column and then
manipulate its GENERATED/IDENTITY status in a second sub-command,
since the generation expression is really just a kind of default.
However, that wasn't very obvious (at least not to me; earlier in
the referenced discussion thread I'd thought it was a bug to be
fixed). And it certainly wasn't documented.
Hence, add documentation, code comments, and a test case to clarify
that this behavior is all intentional.
In passing, adjust ATExecAddColumn's defaults-related relkind check
so that it matches up exactly with ATRewriteTables, instead of being
effectively (though not literally) the negated inverse condition.
The reasoning can be explained a lot more concisely that way, too
(not to mention that the comment now matches the code, which it
did not before).
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
ALTER TABLE failed if a column referenced in a GENERATED expression
had been added or changed in type earlier in the ALTER command.
That's because the GENERATED expression needs to be evaluated
against the table's updated tuples, but it was being evaluated
against the original tuples. (Fortunately the executor has adequate
cross-checks to notice the mismatch, so we just got an obscure error
message and not anything more dangerous.)
Per report from Andreas Joseph Krogh. Back-patch to v12 where
GENERATED was added.
Discussion: https://postgr.es/m/VisenaEmail.200.231b0a41523275d0.16ea7f800c7@tc7-visena
When row triggers exist in partitioned partitions that are not either
part of FKs or deferred unique constraints, they are not correctly
cloned to their partitions. That's because they are marked "internal",
and those are purposefully skipped when doing the clone triggers dance.
Fix by relaxing the condition on which internal triggers are skipped.
Amit Langote initially diagnosed the problem and proposed a fix, but I
used a different approach.
Reported-by: Petr Fedorov
Discussion: https://postgr.es/m/6b3f0646-ba8c-b3a9-c62d-1c6651a1920f@phystech.edu
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
In the wake of commit 5b9312378, there's no particular reason
for this restriction (previously, it was problematic because of
the implied rowtype reference). A simple constraint on a whole-row
Var probably isn't that useful, but conceivably somebody would want
to pass one to a function that extracts a partitioning key. Besides
which, we're expending much more code to enforce the restriction than
we save by having it, since the latter quantity is now zero.
So drop the restriction.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
This wasn't checked originally, but it should have been, because
in general pseudo-types can't be stored to and retrieved from disk.
Notably, partition bound values of type "record" would not be
interpretable by another session.
In v12 and HEAD, add another flag to CheckAttributeType's repertoire
so that it can produce a specific error message for this case. That's
infeasible in older branches without an ABI break, so fall back to
a slightly-less-nicely-worded error message in v10 and v11.
Problem noted by Amit Langote, though this patch is not his initial
solution. Back-patch to v10 where partitioning was introduced.
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Tuple conversion support in tupconvert.c is able to convert rowtypes
between two relations, inner and outer, which are logically equivalent
but have a different ordering or even dropped columns (used mainly for
inheritance tree and partitions). This makes use of attribute mappings,
which are simple arrays made of AttrNumber elements with a length
matching the number of attributes of the outer relation. The length of
the attribute mapping has been treated as completely independent of the
mapping itself until now, making it easy to pass down an incorrect
mapping length.
This commit refactors the code related to attribute mappings and moves
it into an independent facility called attmap.c, extracted from
tupconvert.c. This merges the attribute mapping with its length,
avoiding to try to guess what is the length of a mapping to use as this
is computed once, when the map is built.
This will avoid mistakes like what has been fixed in dc816e58, which has
used an incorrect mapping length by matching it with the number of
attributes of an inner relation (a child partition) instead of an outer
relation (a partitioned table).
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz
It was once possible to do ALTER TABLE ... SET STATISTICS on system
tables without allow_sytem_table_mods. This was changed apparently by
accident between PostgreSQL 9.1 and 9.2, but a code comment still
claimed this was possible. Without that functionality, having a
separate ATPrepSetStatistics() is useless, so use the generic
ATSimplePermissions() instead and move the remaining custom code into
ATExecSetStatistics().
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/cc8d2648-a0ec-7a86-13e5-db473484e19e%402ndquadrant.com
All operations with acl permissions checks should have a corresponding hook
so that, for example, mandatory access control (MAC) may be enforced by an
extension. The command TRUNCATE is missing this hook, so add it. Patch by
Yuli Khodorkovskiy with some editorialization by me. Based on the discussion
not back-patched. A separate patch will exercise the hook in the sepgsql
extension.
Author: Yuli Khodorkovskiy
Reviewed-by: Joe Conway
Discussion: https://postgr.es/m/CAFL5wJcomybj1Xdw7qWmPJRpGuFukKgNrDb6uVBaCMgYS9dkaA%40mail.gmail.com
Partitioned tables do not have relation options yet, but, similarly to
what's done for views which have their own parsing table, it could make
sense to introduce new parameters for some of the existing default ones
like fillfactor, autovacuum, etc. Splitting things has the advantage to
make the information stored in rd_options include only the necessary
information, reducing the amount of memory used for a relcache entry
with partitioned tables if new reloptions are introduced at this level.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/1627387.Qykg9O6zpu@x200m
When using CREATE TABLE for a new partition, the partitioned indexes of
the parent are created automatically in a fashion similar to LIKE
INDEXES. The new partition and its parent use a mapping for attribute
numbers for this operation, and while the mapping was correctly built,
its length was defined as the number of attributes of the newly-created
child, and not the parent. If the parent includes dropped columns, this
could cause failures.
This is wrong since 8b08f7d which has introduced the concept of
partitioned indexes, so backpatch down to 11.
Reported-by: Wyatt Alt
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAGem3qCcRmhbs4jYMkenYNfP2kEusDXvTfw-q+eOhM0zTceG-g@mail.gmail.com
Backpatch-through: 11
When dropping a column on a partitioned table which has one or more
partitioned indexes, the operation was failing as dependencies with
partitioned indexes using the column dropped were not getting removed in
a way consistent with the columns involved across all the relations part
of an inheritance tree.
This commit refactors the code executing column drop so as all the
columns from an inheritance tree to remove are gathered first, and
dropped all at the end. This way, we let the dependency machinery sort
out by itself the deletion of all the columns with the partitioned
indexes across a partition tree.
This issue has been introduced by 1d92a0c, so backpatch down to
REL_12_STABLE.
Author: Amit Langote, Michael Paquier
Reviewed-by: Álvaro Herrera, Ashutosh Sharma
Discussion: https://postgr.es/m/CA+HiwqE9kuBsZ3b5pob2-cvE8ofzPWs-og+g8bKKGnu6b4-yTQ@mail.gmail.com
Backpatch-through: 12
In c2fe139c20 I made ATRewriteTable() use tuple slots. Unfortunately
I did not notice that columns can be added in a rewrite that do not
have a default, when another column is added/altered requiring one.
Initialize columns to NULL again, and add tests.
Bug: #16038
Reported-By: anonymous
Author: Andres Freund
Discussion: https://postgr.es/m/16038-5c974541f2bf6749@postgresql.org
Backpatch: 12, where the bug was introduced in c2fe139c20
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
The message was included as a parameter when this function was added in
dcb2bda9b7, but I don't think it has ever served any useful purpose.
Let's stop spreading it pointlessly.
Reviewed by Amit Langote and Peter Eisentraut.
Discussion: https://postgr.es/m/20190806224728.GA17233@alvherre.pgsql
If a table inherits from multiple unrelated parents, we must disallow
changing the type of a column inherited from multiple such parents, else
it would be out of step with the other parents. However, it's possible
for the column to ultimately be inherited from just one common ancestor,
in which case a change starting from that ancestor should still be
allowed. (I would not be excited about preserving that option, were
it not that we have regression test cases exercising it already ...)
It's slightly annoying that this patch looks different from the logic
with the same end goal in renameatt(), and more annoying that it
requires an extra syscache lookup to make the test. However, the
recursion logic is quite different in the two functions, and a
back-patched bug fix is no place to be trying to unify them.
Per report from Manuel Rigger. Back-patch to 9.5. The bug exists in
9.4 too (and doubtless much further back); but the way the recursion
is done in 9.4 is a good bit different, so that substantial refactoring
would be needed to fix it in 9.4. I'm disinclined to do that, or risk
introducing new bugs, for a bug that has escaped notice for this long.
Discussion: https://postgr.es/m/CA+u7OA4qogDv9rz1HAb-ADxttXYPqQdUdPY_yd4kCzywNxRQXA@mail.gmail.com
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6nZiO9-eEpr1ZD84bT1mBoVmeZkfont8iSpcmYrjhGWgA@mail.gmail.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
Some code could get confused when certain catalog state involving both
identity and serial sequences was present, perhaps during an attempt
to upgrade the latter to the former. Specifically, dropping the
default of a serial column maintains the ownership of the sequence by
the column, and so it would then be possible to afterwards make the
column an identity column that would now own two sequences. This
causes the code that looks up the identity sequence to error out,
making the new identity column inoperable until the ownership of the
previous sequence is released.
To fix this, make the identity sequence lookup only consider sequences
with the appropriate dependency type for an identity sequence, so it
only ever finds one (unless something else is broken). In the above
example, the old serial sequence would then be ignored. Reorganize
the various owned-sequence-lookup functions a bit to make this
clearer.
Reported-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/470c54fc8590be4de0f41b0d295fd6390d5e8a6c.camel@cybertec.at
Formerly, lcons was about the same speed as lappend, but with the new
List implementation, that's not so; with a long List, data movement
imposes an O(N) cost on lcons and list_delete_first, but not lappend.
Hence, invent list_delete_last with semantics parallel to
list_delete_first (but O(1) cost), and change various places to use
lappend and list_delete_last where this can be done without much
violence to the code logic.
There are quite a few places that construct result lists using lcons not
lappend. Some have semantic rationales for that; I added comments about
it to a couple that didn't have them already. In many such places though,
I think the coding is that way only because back in the dark ages lcons
was faster than lappend. Hence, switch to lappend where this can be done
without causing semantic changes.
In ExecInitExprRec(), this results in aggregates and window functions that
are in the same plan node being executed in a different order than before.
Generally, the executions of such functions ought to be independent of
each other, so this shouldn't result in visibly different query results.
But if you push it, as one regression test case does, you can show that
the order is different. The new order seems saner; it's closer to
the order of the functions in the query text. And we never documented
or promised anything about this, anyway.
Also, in gistfinishsplit(), don't bother building a reverse-order list;
it's easy now to iterate backwards through the original list.
It'd be possible to go further towards removing uses of lcons and
list_delete_first, but it'd require more extensive logic changes,
and I'm not convinced it's worth it. Most of the remaining uses
deal with queues that probably never get long enough to be worth
sweating over. (Actually, I doubt that any of the changes in this
patch will have measurable performance effects either. But better
to have good examples than bad ones in the code base.)
Patch by me, thanks to David Rowley and Daniel Gustafsson for review.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
This should lappend the OIDs, not lcons them; the existing code produced
a list in reversed order. This is harmless for single-key FKs or FKs
where all the key columns are of the same type, which probably explains
how it went unnoticed. But if those conditions are not met,
ATAddForeignKeyConstraint would make the wrong decision about whether an
existing FK needs to be revalidated. I think it would almost always err
in the safe direction by revalidating a constraint that didn't need it.
You could imagine scenarios where the pfeqop check was fooled by
swapping the types of two FK columns in one ALTER TABLE, but that case
would probably be rejected by other tests, so it might be impossible to
get to the worst-case scenario where an FK should be revalidated and
isn't. (And even then, it's likely to be fine, unless there are weird
inconsistencies in the equality behavior of the replacement types.)
However, this is a performance bug at least.
Noted while poking around to see whether lcons calls could be converted
to lappend.
This bug is old, dating to commit cb3a7c2b9, so back-patch to all
supported branches.
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
We forgot to map column numbers to/from the default partition for
various operations, leading to valid cases failing with spurious
errors, such as
ERROR: attribute N of type some_partition has been dropped
It was also possible that the search for conflicting rows in the default
partition when attaching another partition would fail to detect some.
Secondarily, it was also possible that such a search should be skipped
(because the constraint was implied) but wasn't.
Fix all this by mapping column numbers when necessary.
Reported by: Daniel Wilches
Author: Amit Langote
Discussion: https://postgr.es/m/15873-8c61945d6b3ef87c@postgresql.org
When a partitioned tables contains foreign tables as partitions, it is
not possible to implement unique or primary key indexes -- but when
regular indexes are created, there is no reason to do anything other
than ignoring such partitions. We were raising errors upon encountering
the foreign partitions, which is unfriendly and doesn't protect against
any actual problems.
Relax this restriction so that index creation is allowed on partitioned
tables containing foreign partitions, becoming a no-op on them. (We may
later want to redefine this so that the FDW is told to create the
indexes on the foreign side.) This applies to CREATE INDEX, as well as
ALTER TABLE / ATTACH PARTITION and CREATE TABLE / PARTITION OF.
Backpatch to 11, where indexes on partitioned tables were introduced.
Discussion: https://postgr.es/m/15724-d5a58fa9472eef4f@postgresql.org
Author: Álvaro Herrera
Reviewed-by: Amit Langote
Move ATExecAlterColumnGenericOptions away from where it was unthinkingly
dropped, in the middle of a lot of ALTER COLUMN TYPE code. I don't have
any high principles about where to put it instead, so let's just put it
after ALTER COLUMN TYPE and before ALTER OWNER, matching existing
decisions about how to order related code stanzas.
Also add the minimal function header comment that the original author
was too cool to bother with.
Along the way, upgrade header comments for nearby ALTER COLUMN TYPE
functions.
Discussion: https://postgr.es/m/14787.1561403130@sss.pgh.pa.us
This patch reverts all the code changes of commit e76de8861, which turns
out to have been seriously misguided. We can't wait till later to compute
the definition string for an index; we must capture that before applying
the data type change for any column it depends on, else ruleutils.c will
deliverr wrong/misleading results. (This fine point was documented
nowhere, of course.)
I'd also managed to forget that ATExecAlterColumnType executes once per
ALTER COLUMN TYPE clause, not once per statement; which resulted in the
code being basically completely broken for any case in which multiple ALTER
COLUMN TYPE clauses are applied to a table having non-constraint indexes
that must be rebuilt. Through very bad luck, none of the existing test
cases nor the ones added by e76de8861 caught that, but of course it was
soon found in the field.
The previous patch also had an implicit assumption that if a constraint's
index had a dependency on a table column, so would the constraint --- but
that isn't actually true, so it didn't fix such cases.
Instead of trying to delete unneeded index dependencies later, do the
is-there-a-constraint lookup immediately on seeing an index dependency,
and switch to remembering the constraint if so. In the unusual case of
multiple column dependencies for a constraint index, this will result in
duplicate constraint lookups, but that's not that horrible compared to all
the other work that happens here. Besides, such cases did not work at all
before, so it's hard to argue that they're performance-critical for anyone.
Per bug #15865 from Keith Fiske. As before, back-patch to all supported
branches.
Discussion: https://postgr.es/m/15865-17940eacc8f8b081@postgresql.org
ATExecAlterColumnType failed to consider the possibility that an index
that needs to be rebuilt might be a child of a constraint that needs to be
rebuilt. We missed this so far because usually a constraint index doesn't
have a direct dependency on its table, just on the constraint object.
But if there's a WHERE clause, then dependency analysis of the WHERE
clause results in direct dependencies on the column(s) mentioned in WHERE.
This led to trying to drop and rebuild both the constraint and its
underlying index.
In v11/HEAD, we successfully drop both the index and the constraint,
and then try to rebuild both, and of course the second rebuild hits a
duplicate-index-name problem. Before v11, it fails with obscure messages
about a missing relation OID, due to trying to drop the index twice.
This is essentially the same kind of problem noted in commit
20bef2c31: the possible dependency linkages are broader than what
ATExecAlterColumnType was designed for. It was probably OK when
written, but it's certainly been broken since the introduction of
partial exclusion constraints. Fix by adding an explicit check
for whether any of the indexes-to-be-rebuilt belong to any of the
constraints-to-be-rebuilt, and ignoring any that do.
In passing, fix a latent bug introduced by commit 8b08f7d48: in
get_constraint_index() we must "continue" not "break" when rejecting
a relation of a wrong relkind. This is harmless today because we don't
expect that code path to be taken anyway; but if there ever were any
relations to be ignored, the existing coding would have an extremely
undesirable dependency on the order of pg_depend entries.
Also adjust a couple of obsolete comments.
Per bug #15835 from Yaroslav Schekin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15835-32d9b7a76c06a7a9@postgresql.org
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
In commit 87259588d0 I (Álvaro) tried to rationalize the determination
of tablespace to use for partitioned tables, but failed to handle the
default_tablespace case. Repair and add proper tests.
Author: Amit Langote, Rushabh Lathia
Reported-by: Rushabh Lathia
Reviewed-by: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/CAGPqQf0cYjm1=rjxk_6gU0SjUS70=yFUAdCJLwWzh9bhNJnyVg@mail.gmail.com
When merging two attributes, we are sure that at least one remains.
However, when deleting one element in the attribute list we may finish
with an empty list returned as NIL by list_delete_cell(), but the code
failed to track that, which is not project-like. Adjust the call so as
we check for an empty list, and make use of it in an assertion.
This has been introduced by e7b3349, when adding support for CREATE
TABLE OF.
Author: Mark Dilger
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/CAE-h2TpPDqSWgOvfvSziOaMngMPwW+QZcmPpY8hQ_KOJ2+3hXQ@mail.gmail.com
It's not really supported to call systable_getnext() in a different
memory context than systable_beginscan() was called in, and it's
*definitely* not safe to do so and then reset that context between
calls. I'm not very clear on how this code survived
CLOBBER_CACHE_ALWAYS testing ... but Alexander Lakhin found a case
that would crash it pretty reliably.
Per bug #15828. Fix, and backpatch to v11 where this code came in.
Discussion: https://postgr.es/m/15828-f6ddd7df4852f473@postgresql.org
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.
The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed. That's even sillier. With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.
With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID. Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)". But keep
IsCatalogRelation as a convenience function.
This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid. The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.
While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.
Also improve the comments in catalog.c.
There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId. I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId. But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.
Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
Some messages related to foreign servers were reporting the server name
without quotes, or not at all; our style is to have all names be quoted,
and the server name already appears quoted in a few other messages, so
just add quotes and make them all consistent.
Remove an extra "s" in other messages (typos introduced by myself in
f56f8f8da6).
Project style is to check the success of SearchSysCacheN and friends
by applying HeapTupleIsValid to the result. A tiny minority of calls
creatively did it differently. Bring them into line with the rest.
This is just cosmetic, since HeapTupleIsValid is indeed just a null
check at the moment ... but that may not be true forever, and in any
case it puts a mental burden on readers who may wonder why these
call sites are not like the rest.
Back-patch to v11 just to keep the branches in sync. (The bulk of these
errors seem to have originated in v11 or v12, though a few are old.)
Per searching to see if anyplace else had made the same error
repaired in 62148c352.
Most of these stem from d25f519107 "tableam: relation creation, VACUUM
FULL/CLUSTER, SET TABLESPACE.".
1) To pass data to the relation_set_new_filenode()
RelationSetNewRelfilenode() was made to update RelationData.rd_rel
directly. That's not OK however, as it makes the relcache entries
temporarily inconsistent. Which among other scenarios is a problem
if a REINDEX targets an index on pg_class - the
CatalogTupleUpdate() in RelationSetNewRelfilenode(). Presumably
that was introduced because other places in the code do so - while
those aren't "good practice" they don't appear to be actively
buggy (e.g. because system tables may not be targeted).
I (Andres) should have caught this while reviewing and signficantly
evolving the code in that commit, mea culpa.
Fix that by instead passing in the new RelFileNode as separate
argument to relation_set_new_filenode() and rely on the relcache to
update the catalog entry. Also revert that the
RelationMapUpdateMap() call was changed to immediate, and undo some
other more unnecessary changes.
2) Document that the relation_set_new_filenode cannot rely on the
whole relcache entry to be valid. It might be worthwhile to
refactor the code to never have to rely on that, but given the way
heap_create() is currently coded, that'd be a large change.
3) ATExecSetTableSpace() shouldn't do FlushRelationBuffers() itself. A
table AM might not use shared buffers at all. Move to
index_copy_data() and heapam_relation_copy_data().
4) heapam_relation_set_new_filenode() previously sometimes accessed
rel->rd_rel->relpersistence rather than the `persistence`
argument. Code movement mistake.
5) Previously heapam_relation_set_new_filenode() re-opened the smgr
relation to create the init for, if necesary. Instead have
RelationCreateStorage() return the SMgrRelation and use it to
create the init fork.
6) Add a note about the danger of modifying the relcache directly to
ATExecSetTableSpace() - it's currently not a bug because there's a
check ERRORing for catalog tables.
Regression tests and assertion improvements that together trigger the
bug described in 1) will be added in a later commit, as there is a
related bug on all branches.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Fix DefineIndex so that it doesn't attempt to pass down a to-be-reused
index relfilenode to a child index creation, and fix TryReuseIndex
to not think that reuse is sensible for a partitioned index.
In v11, this fixes a problem where ALTER TABLE on a partitioned table
could assign the same relfilenode to several different child indexes,
causing very nasty catalog corruption --- in fact, attempting to DROP
the partitioned table then leads not only to a database crash, but to
inability to restart because the same crash will recur during WAL replay.
Either of these two changes would be enough to prevent the failure, but
since neither action could possibly be sane, let's put in both changes
for future-proofing.
In HEAD, no such bug manifests, but that's just an accidental consequence
of having changed the pg_class representation of partitioned indexes to
have relfilenode = 0. Both of these changes still seem like smart
future-proofing.
This is only a stop-gap because the code for ALTER TABLE on a partitioned
table with a no-op type change still leaves a great deal to be desired.
As the added regression tests show, it gets things wrong for comments on
child indexes/constraints, and it is regenerating child indexes it doesn't
have to. However, fixing those problems will take more work which may not
get back-patched into v11. We need a fix for the corruption problem now.
Per bug #15672 from Jianing Yang.
Patch by me, regression test cases based on work by Amit Langote,
who also did a lot of the investigative work.
Discussion: https://postgr.es/m/15672-b9fa7db32698269f@postgresql.org
When an existing index in a partition is attached to a new index on
its parent, we forgot to set the "relispartition" flag correctly, which
meant that it was not possible to find the index in various operations,
such as adding a foreign key constraint that references that partitioned
table. One of four places that was assigning the parent index was
forgetting to do that, so fix by shifting responsibility of updating the
flag to the routine that changes the parent.
Author: Amit Langote, Álvaro Herrera
Reported-by: Hubert "depesz" Lubaczewski
Discussion: https://postgr.es/m/CA+HiwqHMsRtRYRWYTWavKJ8x14AFsv7bmAV46mYwnfD3vy8goQ@mail.gmail.com
Commit ca4103025d left a few loose ends. The most important one
(broken pg_dump output) is already fixed by virtue of commit
3b23552ad8, but some things remained:
* When ALTER TABLE rewrites tables, the indexes must remain in the
tablespace they were originally in. This didn't work because
index recreation during ALTER TABLE runs manufactured SQL (yuck),
which runs afoul of default_tablespace in competition with the parent
relation tablespace. To fix, reset default_tablespace to the empty
string temporarily, and add the TABLESPACE clause as appropriate.
* Setting a partitioned rel's tablespace to the database default is
confusing; if it worked, it would direct the partitions to that
tablespace regardless of default_tablespace. But in reality it does
not work, and making it work is a larger project. Therefore, throw
an error when this condition is detected, to alert the unwary.
Add some docs and tests, too.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Up to now, DefineIndex() was responsible for adding attnotnull constraints
to the columns of a primary key, in any case where it hadn't been
convenient for transformIndexConstraint() to mark those columns as
is_not_null. It (or rather its minion index_check_primary_key) did this
by executing an ALTER TABLE SET NOT NULL command for the target table.
The trouble with this solution is that if we're creating the index due
to ALTER TABLE ADD PRIMARY KEY, and the outer ALTER TABLE has additional
sub-commands, the inner ALTER TABLE's operations executed at the wrong
time with respect to the outer ALTER TABLE's operations. In particular,
the inner ALTER would perform a validation scan at a point where the
table's storage might be inconsistent with its catalog entries. (This is
on the hairy edge of being a security problem, but AFAICS it isn't one
because the inner scan would only be interested in the tuples' null
bitmaps.) This can result in unexpected failures, such as the one seen
in bug #15580 from Allison Kaptur.
To fix, let's remove the attempt to do SET NOT NULL from DefineIndex(),
reducing index_check_primary_key's role to verifying that the columns are
already not null. (It shouldn't ever see such a case, but it seems wise
to keep the check for safety.) Instead, make transformIndexConstraint()
generate ALTER TABLE SET NOT NULL subcommands to be executed ahead of
the ADD PRIMARY KEY operation in every case where it can't force the
column to be created already-not-null. This requires only minor surgery
in parse_utilcmd.c, and it makes for a much more satisfying spec for
transformIndexConstraint(): it's no longer having to take it on faith
that someone else will handle addition of NOT NULL constraints.
To make that work, we have to move the execution of AT_SetNotNull into
an ALTER pass that executes ahead of AT_PASS_ADD_INDEX. I moved it to
AT_PASS_COL_ATTRS, and put that after AT_PASS_ADD_COL to avoid failure
when the column is being added in the same command. This incidentally
fixes a bug in the only previous usage of AT_PASS_COL_ATTRS, for
AT_SetIdentity: it didn't work either for a newly-added column.
Playing around with this exposed a separate bug in ALTER TABLE ONLY ...
ADD PRIMARY KEY for partitioned tables. The intent of the ONLY modifier
in that context is to prevent doing anything that would require holding
lock for a long time --- but the implied SET NOT NULL would recurse to
the child partitions, and do an expensive validation scan for any child
where the column(s) were not already NOT NULL. To fix that, invent a
new ALTER subcommand AT_CheckNotNull that just insists that a child
column be already NOT NULL, and apply that, not AT_SetNotNull, when
recursing to children in this scenario. This results in a slightly laxer
definition of ALTER TABLE ONLY ... SET NOT NULL for partitioned tables,
too: that command will now work as long as all children are already NOT
NULL, whereas before it just threw up its hands if there were any
partitions.
In passing, clean up the API of generateClonedIndexStmt(): remove a
useless argument, ensure that the output argument is not left undefined,
update the header comment.
A small side effect of this change is that no-such-column errors in ALTER
TABLE ADD PRIMARY KEY now produce a different message that includes the
table name, because they are now detected by the SET NOT NULL step which
has historically worded its error that way. That seems fine to me, so
I didn't make any effort to avoid the wording change.
The basic bug #15580 is of very long standing, and these other bugs
aren't new in v12 either. However, this is a pretty significant change
in the way ALTER TABLE ADD PRIMARY KEY works. On balance it seems best
not to back-patch, at least not till we get some more confidence that
this patch has no new bugs.
Patch by me, but thanks to Jie Zhang for a preliminary version.
Discussion: https://postgr.es/m/15580-d1a6de5a3d65da51@postgresql.org
Discussion: https://postgr.es/m/1396E95157071C4EBBA51892C5368521017F2E6E63@G08CNEXMBPEKD02.g08.fujitsu.local
The foreign-key-checking loop in ATRewriteTables failed to ignore
relations without storage (e.g., partitioned tables), unlike the
initial loop. This accidentally worked as long as RI_Initial_Check
succeeded, which it does in most practical cases (including all the
ones exercised in the existing regression tests :-(). However, if
that failed, as for instance when there are permissions issues,
then we entered the slow fire-the-trigger-on-each-tuple path.
And that would try to read from the referencing relation, and fail
if it lacks storage.
A second problem, recently introduced in HEAD, was that this loop
had been broken by sloppy refactoring for the tableam API changes.
Repair both issues, and add a regression test case so we have some
coverage on this code path. Back-patch as needed to v11.
(It looks like this code could do with additional bulletproofing,
but let's get a working test case in place first.)
Hadi Moshayedi, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/CAK=1=WrnNmBbe5D9sm3t0a6dnAq3cdbF1vXY816j1wsMqzC8bw@mail.gmail.com
Discussion: https://postgr.es/m/19030.1554574075@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190325180405.jytoehuzkeozggxx%40alap3.anarazel.de
Previously it was allowed to set default_table_access_method to an
empty string. That makes sense for default_tablespace, where that was
copied from, as it signals falling back to the database's default
tablespace. As there is no equivalent for table AMs, forbid that.
Also make sure to throw a usable error when creating a table using an
index AM, by using get_am_type_oid() to implement get_table_am_oid()
instead of a separate copy. Previously we'd error out only later, in
GetTableAmRoutine().
Thirdly remove GetTableAmRoutineByAmId() - it was only used in an
earlier version of 8586bf7ed8.
Add tests for the above (some for index AMs as well).
Previously, while primary keys could be made on partitioned tables, it
was not possible to define foreign keys that reference those primary
keys. Now it is possible to do that.
Author: Álvaro Herrera
Reviewed-by: Amit Langote, Jesper Pedersen
Discussion: https://postgr.es/m/20181102234158.735b3fevta63msbj@alvherre.pgsql
This replaces the previous calls of heap_sync() in places using
bulk-insert. By passing in the flags used for bulk-insert the AM can
decide (first at insert time and then during the finish call) which of
the optimizations apply to it, and what operations are necessary to
finish a bulk insert operation.
Also change HEAP_INSERT_* flags to TABLE_INSERT, and rename hi_options
to ti_options.
These changes are made even in copy.c, which hasn't yet been converted
to tableam. There's no harm in doing so.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
This adds the CONCURRENTLY option to the REINDEX command. A REINDEX
CONCURRENTLY on a specific index creates a new index (like CREATE
INDEX CONCURRENTLY), then renames the old index away and the new index
in place and adjusts the dependencies, and then drops the old
index (like DROP INDEX CONCURRENTLY). The REINDEX command also has
the capability to run its other variants (TABLE, DATABASE) with the
CONCURRENTLY option (but not SYSTEM).
The reindexdb command gets the --concurrently option.
Author: Michael Paquier, Andreas Karlsson, Peter Eisentraut
Reviewed-by: Andres Freund, Fujii Masao, Jim Nasby, Sergei Kornilov
Discussion: https://www.postgresql.org/message-id/flat/60052986-956b-4478-45ed-8bd119e9b9cf%402ndquadrant.com#74948a1044c56c5e817a5050f554ddee
This moves the responsibility for:
- creating the storage necessary for a relation, including creating a
new relfilenode for a relation with existing storage
- non-transactional truncation of a relation
- VACUUM FULL / CLUSTER's rewrite of a table
below tableam.
This is fairly straight forward, with a bit of complexity smattered in
to move the computation of xid / multixid horizons below the AM, as
they don't make sense for every table AM.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
ALTER INDEX .. ATTACH PARTITION fails if the partitioned table where the
index is defined contains more dropped columns than its partition, with
this message:
ERROR: incorrect attribute map
The cause was that one caller of CompareIndexInfo was passing the number
of attributes of the partition rather than the parent, which confused
the length check. Repair.
This can cause pg_upgrade to fail when used on such a database. Leave
some more objects around after regression tests, so that the case is
detected by pg_upgrade test suite.
Remove some spurious empty lines noticed while looking for other cases
of the same problem.
Discussion: https://postgr.es/m/20190326213924.GA2322@alvherre.pgsql
If existing CHECK or NOT NULL constraints preclude the presence
of nulls, we need not look to see whether any are present.
Sergei Kornilov, reviewed by Stephen Frost, Ildar Musin, David Rowley,
and by me.
Discussion: http://postgr.es/m/81911511895540@web58j.yandex.ru
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
When the timezone is UTC, timestamptz and timestamp are binary coercible
in both directions. See b8a18ad485 and
c22ecc6562 for the previous attempt in
this problem space. Skip the table rewrite; for now, continue to
needlessly rewrite any index on an affected column.
Reviewed by Simon Riggs and Tom Lane.
Discussion: https://postgr.es/m/20190226061450.GA1665944@rfd.leadboat.com
We still require AccessExclusiveLock on the partition itself, because
otherwise an insert that violates the newly-imposed partition
constraint could be in progress at the same time that we're changing
that constraint; only the lock level on the parent relation is
weakened.
To make this safe, we have to cope with (at least) three separate
problems. First, relevant DDL might commit while we're in the process
of building a PartitionDesc. If so, find_inheritance_children() might
see a new partition while the RELOID system cache still has the old
partition bound cached, and even before invalidation messages have
been queued. To fix that, if we see that the pg_class tuple seems to
be missing or to have a null relpartbound, refetch the value directly
from the table. We can't get the wrong value, because DETACH PARTITION
still requires AccessExclusiveLock throughout; if we ever want to
change that, this will need more thought. In testing, I found it quite
difficult to hit even the null-relpartbound case; the race condition
is extremely tight, but the theoretical risk is there.
Second, successive calls to RelationGetPartitionDesc might not return
the same answer. The query planner will get confused if lookup up the
PartitionDesc for a particular relation does not return a consistent
answer for the entire duration of query planning. Likewise, query
execution will get confused if the same relation seems to have a
different PartitionDesc at different times. Invent a new
PartitionDirectory concept and use it to ensure consistency. This
ensures that a single invocation of either the planner or the executor
sees the same view of the PartitionDesc from beginning to end, but it
does not guarantee that the planner and the executor see the same
view. Since this allows pointers to old PartitionDesc entries to
survive even after a relcache rebuild, also postpone removing the old
PartitionDesc entry until we're certain no one is using it.
For the most part, it seems to be OK for the planner and executor to
have different views of the PartitionDesc, because the executor will
just ignore any concurrently added partitions which were unknown at
plan time; those partitions won't be part of the inheritance
expansion, but invalidation messages will trigger replanning at some
point. Normally, this happens by the time the very next command is
executed, but if the next command acquires no locks and executes a
prepared query, it can manage not to notice until a new transaction is
started. We might want to tighten that up, but it's material for a
separate patch. There would still be a small window where a query
that started just after an ATTACH PARTITION command committed might
fail to notice its results -- but only if the command starts before
the commit has been acknowledged to the user. All in all, the warts
here around serializability seem small enough to be worth accepting
for the considerable advantage of being able to add partitions without
a full table lock.
Although in general the consequences of new partitions showing up
between planning and execution are limited to the query not noticing
the new partitions, run-time partition pruning will get confused in
that case, so that's the third problem that this patch fixes.
Run-time partition pruning assumes that indexes into the PartitionDesc
are stable between planning and execution. So, add code so that if
new partitions are added between plan time and execution time, the
indexes stored in the subplan_map[] and subpart_map[] arrays within
the plan's PartitionedRelPruneInfo get adjusted accordingly. There
does not seem to be a simple way to generalize this scheme to cope
with partitions that are removed, mostly because they could then get
added back again with different bounds, but it works OK for added
partitions.
This code does not try to ensure that every backend participating in
a parallel query sees the same view of the PartitionDesc. That
currently doesn't matter, because we never pass PartitionDesc
indexes between backends. Each backend will ignore the concurrently
added partitions which it notices, and it doesn't matter if different
backends are ignoring different sets of concurrently added partitions.
If in the future that matters, for example because we allow writes in
parallel query and want all participants to do tuple routing to the same
set of partitions, the PartitionDirectory concept could be improved to
share PartitionDescs across backends. There is a draft patch to
serialize and restore PartitionDescs on the thread where this patch
was discussed, which may be a useful place to start.
Patch by me. Thanks to Alvaro Herrera, David Rowley, Simon Riggs,
Amit Langote, and Michael Paquier for discussion, and to Alvaro
Herrera for some review.
Discussion: http://postgr.es/m/CA+Tgmobt2upbSocvvDej3yzokd7AkiT+PvgFH+a9-5VV1oJNSQ@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZE0r9-cyA-aY6f8WFEROaDLLL7Vf81kZ8MtFCkxpeQSw@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoY13KQZF-=HNTrt9UYWYx3_oYOQpu9ioNT49jGgiDpUEA@mail.gmail.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
After the introduction of tuple table slots all table AMs need to
support returning the table oid of the tuple stored in a slot created
by said AM. It does not make sense to re-implement that in every AM,
therefore move handling of table OIDs into the TupleTableSlot
structure itself. It's possible that we, at a later date, might want
to get rid of HeapTupleData.t_tableOid entirely, but doing so before
the abstractions for table AMs are integrated turns out to be too
hard, so delay that for now.
Similarly, every AM needs to support the concept of a tuple
identifier (tid / item pointer) for its tuples. It's quite possible
that we'll generalize the exact form of a tid at a future point (to
allow for things like index organized tables), but for now many parts
of the code know about tids, so there's not much point in abstracting
tids away. Therefore also move into slot (rather than providing API to
set/get the tid associated with the tuple in a slot).
Once table AM includes insert/updating/deleting tuples, the
responsibility to set the correct tid after such an action will move
into that. After that change, code doing such modifications, should
not have to deal with HeapTuples directly anymore.
Author: Andres Freund, Haribabu Kommi and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is similar in spirit to the existing partbounds.c file in the
same directory, except that there's a lot less code in the new file
created by this commit. Pending work in this area proposes to add a
bunch more code related to PartitionDescs, though, and this will give
us a good place to put it.
Discussion: http://postgr.es/m/CA+TgmoZUwPf_uanjF==gTGBMJrn8uCq52XYvAEorNkLrUdoawg@mail.gmail.com
The original setup for dependencies of partitioned objects had
serious problems:
1. It did not verify that a drop cascading to a partition-child object
also cascaded to at least one of the object's partition parents. Now,
normally a child object would share all its dependencies with one or
another parent (e.g. a child index's opclass dependencies would be shared
with the parent index), so that this oversight is usually harmless.
But if some dependency failed to fit this pattern, the child could be
dropped while all its parents remain, creating a logically broken
situation. (It's easy to construct artificial cases that break it,
such as attaching an unrelated extension dependency to the child object
and then dropping the extension. I'm not sure if any less-artificial
cases exist.)
2. Management of partition dependencies during ATTACH/DETACH PARTITION
was complicated and buggy; for example, after detaching a partition
table it was possible to create cases where a formerly-child index
should be dropped and was not, because the correct set of dependencies
had not been reconstructed.
Less seriously, because multiple partition relationships were
represented identically in pg_depend, there was an order-of-traversal
dependency on which partition parent was cited in error messages.
We also had some pre-existing order-of-traversal hazards for error
messages related to internal and extension dependencies. This is
cosmetic to users but causes testing problems.
To fix#1, add a check at the end of the partition tree traversal
to ensure that at least one partition parent got deleted. To fix#2,
establish a new policy that partition dependencies are in addition to,
not instead of, a child object's usual dependencies; in this way
ATTACH/DETACH PARTITION need not cope with adding or removing the
usual dependencies.
To fix the cosmetic problem, distinguish between primary and secondary
partition dependency entries in pg_depend, by giving them different
deptypes. (They behave identically except for having different
priorities for being cited in error messages.) This means that the
former 'I' dependency type is replaced with new 'P' and 'S' types.
This also fixes a longstanding bug that after handling an internal
dependency by recursing to the owning object, findDependentObjects
did not verify that the current target was now scheduled for deletion,
and did not apply the current recursion level's objflags to it.
Perhaps that should be back-patched; but in the back branches it
would only matter if some concurrent transaction had removed the
internal-linkage pg_depend entry before the recursive call found it,
or the recursive call somehow failed to find it, both of which seem
unlikely.
Catversion bump because the contents of pg_depend change for
partitioning relationships.
Patch HEAD only. It's annoying that we're not fixing #2 in v11,
but there seems no practical way to do so given that the problem
is exactly a poor choice of what entries to put in pg_depend.
We can't really fix that while staying compatible with what's
in pg_depend in existing v11 installations.
Discussion: https://postgr.es/m/CAH2-Wzkypv1R+teZrr71U23J578NnTBt2X8+Y=Odr4pOdW1rXg@mail.gmail.com
After commit 123cc697a8, we remove redundant FK action triggers during
partition ATTACH by merely deleting the catalog tuple, but that's wrong:
it should use performDeletion() instead. Repair, and make the comments
more explicit.
Per code review from Tom Lane.
Discussion: https://postgr.es/m/18885.1549642539@sss.pgh.pa.us
We can't allow these pseudo-types to be used as table column types,
because storing an anonymous record value in a table would result
in data that couldn't be understood by other sessions. However,
it seems like there's no harm in allowing the case in a column
definition list that's specifying what a function-returning-record
returns. The data involved is all local to the current session,
so we should be just as able to resolve its actual tuple type as
we are for the function-returning-record's top-level tuple output.
Elvis Pranskevichus, with cosmetic changes by me
Discussion: https://postgr.es/m/11038447.kQ5A9Uj5xi@hammer.magicstack.net
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
Before this change FunctionCallInfoData, the struct arguments etc for
V1 function calls are stored in, always had space for
FUNC_MAX_ARGS/100 arguments, storing datums and their nullness in two
arrays. For nearly every function call 100 arguments is far more than
needed, therefore wasting memory. Arg and argnull being two separate
arrays also guarantees that to access a single argument, two
cachelines have to be touched.
Change the layout so there's a single variable-length array with pairs
of value / isnull. That drastically reduces memory consumption for
most function calls (on x86-64 a two argument function now uses
64bytes, previously 936 bytes), and makes it very likely that argument
value and its nullness are on the same cacheline.
Arguments are stored in a new NullableDatum struct, which, due to
padding, needs more memory per argument than before. But as usually
far fewer arguments are stored, and individual arguments are cheaper
to access, that's still a clear win. It's likely that there's other
places where conversion to NullableDatum arrays would make sense,
e.g. TupleTableSlots, but that's for another commit.
Because the function call information is now variable-length
allocations have to take the number of arguments into account. For
heap allocations that can be done with SizeForFunctionCallInfoData(),
for on-stack allocations there's a new LOCAL_FCINFO(name, nargs) macro
that helps to allocate an appropriately sized and aligned variable.
Some places with stack allocation function call information don't know
the number of arguments at compile time, and currently variably sized
stack allocations aren't allowed in postgres. Therefore allow for
FUNC_MAX_ARGS space in these cases. They're not that common, so for
now that seems acceptable.
Because of the need to allocate FunctionCallInfo of the appropriate
size, older extensions may need to update their code. To avoid subtle
breakages, the FunctionCallInfoData struct has been renamed to
FunctionCallInfoBaseData. Most code only references FunctionCallInfo,
so that shouldn't cause much collateral damage.
This change is also a prerequisite for more efficient expression JIT
compilation (by allocating the function call information on the stack,
allowing LLVM to optimize it away); previously the size of the call
information caused problems inside LLVM's optimizer.
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20180605172952.x34m5uz6ju6enaem@alap3.anarazel.de
There were two flags used to track the access to temporary tables and
to the temporary namespace of a session which are used to restrict
PREPARE TRANSACTION, however the first control flag is a concept
included in the second. This removes the flag for temporary table
tracking, keeping around only the one at namespace level.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20190118053126.GH1883@paquier.xyz
Previously, only literals were allowed. This change allows general
expressions, including functions calls, which are evaluated at the
time the DDL command is executed.
Besides offering some more functionality, it simplifies the parser
structures and removes some inconsistencies in how the literals were
handled.
Author: Kyotaro Horiguchi, Tom Lane, Amit Langote
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9f88b5e0-6da2-5227-20d0-0d7012beaa1c@lab.ntt.co.jp/
We were failing to set conislocal correctly for constraints in
partitions after partition detach, leading to those constraints becoming
undroppable. Fix by setting the flag correctly. Existing databases
might contain constraints with the conislocal wrongly set to false, for
partitions that were detached; this situation should be fixable by
applying an UPDATE on pg_constraint to set conislocal true. This
problem should otherwise be innocuous and should disappear across a
dump/restore or pg_upgrade.
Secondarily, when constraint drop was attempted in a partitioned table,
ATExecDropConstraint would try to recurse to partitions after doing
performDeletion() of the constraint in the partitioned table itself; but
since the constraint in the partitions are dropped by the initial call
of performDeletion() (because of following dependencies), the recursion
step would fail since it would not find the constraint, causing the
whole operation to fail. Fix by preventing recursion.
Reported-by: Amit Langote
Diagnosed-by: Amit Langote
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Detaching a partition from a partitioned table that's constrained by
foreign keys requires additional action triggers on the referenced side;
otherwise, DELETE/UPDATE actions there fail to notice rows in the table
that was partition, and so are incorrectly allowed through. With this
commit, those triggers are now created. Conversely, when a table that
has a foreign key is attached as a partition to a table that also has
the same foreign key, those action triggers are no longer needed, so we
remove them.
Add a minimal test case verifying (part of) this.
Authors: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
When creating a foreign key in a partitioned table, if some partitions
already have equivalent constraints, we wastefully create duplicates of
the constraints instead of attaching to the existing ones. That's
inconsistent with the de-duplication that is applied when a table is
attached as a partition. To fix, reuse the FK-cloning code instead of
having a separate code path.
Backpatch to Postgres 11. This is a subtle behavior change, but surely
a welcome one since there's no use in having duplicate foreign keys.
Discovered by Álvaro Herrera while thinking about a different problem
reported by Jesper Pedersen (bug #15587).
Author: Álvaro Herrera
Discussion: https://postgr.es/m/201901151935.zfadrzvyof4k@alvherre.pgsql
My commit 3de241dba8 introduced some code to create a clone of a
foreign key to a partition, but I put it in pg_constraint.c because it
was too close to the contents of the pg_constraint row. With the
previous commit that split out the constraint tuple deconstruction into
its own routine, it makes more sense to have the FK-cloning function in
tablecmds.c, mostly because its static subroutine can then be used by a
future bugfix.
My initial posting of this patch had this routine as static in
tablecmds.c, but sadly this function is already part of the Postgres 11
ABI as exported from pg_constraint.c, so keep it as exported also just
to avoid breaking any possible users of it.
This was an oversight in commit 16828d5c. If the table is going to be
rewritten, we simply clear all the missing values from all the table's
attributes, since there will no longer be any rows with the attributes
missing. Otherwise, we repackage the missing value in an array
constructed with the new type specifications.
Backpatch to release 11.
This fixes bug #15446, reported by Dmitry Molotkov
Reviewed by Dean Rasheed
Inheritance trees can include temporary tables if the parent is
permanent, which makes possible the presence of multiple temporary
children from different sessions. Trying to issue a TRUNCATE on the
parent in this scenario causes a failure, so similarly to any other
queries just ignore such cases, which makes TRUNCATE work
transparently.
This makes truncation behave similarly to any other DML query working on
the parent table with queries which need to be work on the children. A
set of isolation tests is added to cover basic cases.
Reported-by: Zhou Digoal
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/15565-ce67a48d0244436a@postgresql.org
Backpatch-through: 9.4
For probably bogus reasons, we acquire only AccessShareLock on the
partition when we try to detach it from its parent partitioned table.
This can cause ugly things to happen if another transaction is doing
any sort of DDL to the partition concurrently.
Upgrade that lock to ShareUpdateExclusiveLock, which per discussion
seems to be the minimum needed.
Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYruJQ+2qnFLtF1xQtr71pdwgfxy3Ziy-TxV28M6pEmyA@mail.gmail.com
When a partition is detached from its parent, we acquire locks on all
attached indexes to also detach them ... but we release those locks
immediately. This is a violation of the policy of keeping locks on user
objects to the end of the transaction. Bug introduced in 8b08f7d482.
It's unclear that there are any ill effects possible, but it's clearly
wrong nonetheless. It's likely that bad behavior *is* possible, but
mostly because the relation that the index is for is only locked with
AccessShareLock, which is an older bug that shall be fixed separately.
While touching that line of code, close the index opened with
index_open() using index_close() instead of relation_close().
No difference in practice, but let's be consistent.
Unearthed by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYruJQ+2qnFLtF1xQtr71pdwgfxy3Ziy-TxV28M6pEmyA@mail.gmail.com
The flag for IF NOT EXISTS was only being passed down in the normal
recursing case. It's been this way since originally added in 9.6 in
commit 2cd40adb85 so backpatch back to 9.6.
When partitioned tables were introduced, we failed to realize that by
copying the tablespace handling for other relation kinds with no
physical storage we were causing the secondary effect that their
partitions would not automatically inherit the tablespace setting. This
is surprising and unhelpful, so change it to adopt the behavior
introduced in pg11 (commit 33e6c34c32) for partitioned indexes: the
parent relation remembers the tablespace specification, which is then
used for any new partitions that don't declare one.
Because this commit changes behavior of the TABLESPACE clause for
partitioned tables (it's no longer a no-op), it is not backpatched.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f9SxVzqDrGD1teosFd6jBMM0UEaa14_8mRvcWE19Tu0hA@mail.gmail.com
This is an oversight from recent commit b13fd344. While on it, tweak
the previous test with a better name for the renamed primary key.
Detected by buildfarm member prion which forces relation cache release
with -DRELCACHE_FORCE_RELEASE. Back-patch down to 9.4 as the previous
commit.
When a constraint gets renamed, it may have associated with it a target
relation (for example domain constraints don't have one). Not
invalidating the target relation cache when issuing the renaming can
result in issues with subsequent commands that refer to the old
constraint name using the relation cache, causing various failures. One
pattern spotted was using CREATE TABLE LIKE after a constraint
renaming.
Reported-by: Stuart <sfbarbee@gmail.com>
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/2047094.V130LYfLq4@station53.ousa.org
The stanza of ExecuteTruncate[Guts] that truncates a target table's toast
relation re-used the loop local variable "rel" to reference the toast rel.
This was safe enough when written, but commit d42358efb added code below
that that supposed "rel" still pointed to the parent table. Therefore,
the stats counter update was applied to the wrong relcache entry (the
toast rel not the user rel); and if we were unlucky and that relcache
entry had been flushed during reindex_relation, very bad things could
ensue.
(I'm surprised that CLOBBER_CACHE_ALWAYS testing hasn't found this.
I'm even more surprised that the problem wasn't detected during the
development of d42358efb; it must not have been tested in any case
with a toast table, as the incorrect stats counts are very obvious.)
To fix, replace use of "rel" in that code branch with a more local
variable. Adjust test cases added by d42358efb so that some of them
use tables with toast tables.
Per bug #15540 from Pan Bian. Back-patch to 9.5 where d42358efb came in.
Discussion: https://postgr.es/m/15540-01078812338195c0@postgresql.org
As per the error message style guide of the documentation, those should
be full sentences.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://1E8D49B4-16BC-4420-B4ED-58501D9E076B@yesql.se
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Change lock level for renaming index (either ALTER INDEX or implicitly
via some other commands) from AccessExclusiveLock to
ShareUpdateExclusiveLock.
One reason we need a strong lock for relation renaming is that the
name change causes a rebuild of the relcache entry. Concurrent
sessions that have the relation open might not be able to handle the
relcache entry changing underneath them. Therefore, we need to lock
the relation in a way that no one can have the relation open
concurrently. But for indexes, the relcache handles reloads specially
in RelationReloadIndexInfo() in a way that keeps changes in the
relcache entry to a minimum. As long as no one keeps pointers to
rd_amcache and rd_options around across possible relcache flushes,
which is the case, this ought to be safe.
We also want to use a self-exclusive lock for correctness, so that
concurrent DDL doesn't overwrite the rename if they start updating
while still seeing the old version. Therefore, we use
ShareUpdateExclusiveLock, which is already used by other DDL commands
that want to operate in a concurrent manner.
The reason this is interesting at all is that renaming an index is a
typical part of a concurrent reindexing workflow (CREATE INDEX
CONCURRENTLY new + DROP INDEX CONCURRENTLY old + rename back). And
indeed a future built-in REINDEX CONCURRENTLY might rely on the ability
to do concurrent renames as well.
Reviewed-by: Andrey Klychkov <aaklychkov@mail.ru>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1531767486.432607658@f357.i.mail.ru
This comes from f9b5b41, which is part of one the original commits that
implemented ON COMMIT actions. By looking at the truncation code, any
CCI needed happens locally when rebuilding indexes, so it looks safe to
just remove this final incrementation.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20181109024731.GF2652@paquier.xyz
This commit fixes a set of issues with ON COMMIT actions when used on
partitioned tables and tables with inheritance children:
- Applying ON COMMIT DROP on a partitioned table with partitions or on a
table with inheritance children caused a failure at commit time, with
complains about the children being already dropped as all relations are
dropped one at the same time.
- Applying ON COMMIT DELETE on a partition relying on a partitioned
table which uses ON COMMIT DROP would cause the partition truncation to
fail as the parent is removed first.
The solution to the first problem is to handle the removal of all the
dependencies in one go instead of dropping relations one-by-one, based
on a suggestion from Álvaro Herrera. So instead all the relation OIDs
to remove are gathered and then processed in one round of multiple
deletions.
The solution to the second problem is to reorder the actions, with
truncation happening first and relation drop done after. Even if it
means that a partition could be first truncated, then immediately
dropped if its partitioned table is dropped, this has the merit to keep
the code simple as there is no need to do existence checks on the
relations to drop.
Contrary to a manual TRUNCATE on a partitioned table, ON COMMIT DELETE
does not cascade to its partitions. The ON COMMIT action defined on
each partition gets the priority.
Author: Michael Paquier
Reviewed-by: Amit Langote, Álvaro Herrera, Robert Haas
Discussion: https://postgr.es/m/68f17907-ec98-1192-f99f-8011400517f5@lab.ntt.co.jp
Backpatch-through: 10
The original code to propagate NOT NULL and default expressions
specified when creating a partition was mostly copy-pasted from
typed-tables creation, but not being a great match it contained some
duplicity, inefficiency and bugs.
This commit fixes the bug that NOT NULL constraints declared in the
parent table would not be honored in the partition. One reported issue
that is not fixed is that a DEFAULT declared in the child is not used
when inserting through the parent. That would amount to a behavioral
change that's better not back-patched.
This rewrite makes the code simpler:
1. instead of checking for duplicate column names in its own block,
reuse the original one that already did that;
2. instead of concatenating the list of columns from parent and the one
declared in the partition and scanning the result to (incorrectly)
propagate defaults and not-null constraints, just scan the latter
searching the former for a match, and merging sensibly. This works
because we know the list in the parent is already correct and there can
only be one parent.
This rewrite makes ColumnDef->is_from_parent unused, so it's removed
on branch master; on released branches, it's kept as an unused field in
order not to cause ABI incompatibilities.
This commit also adds a test case for creating partitions with
collations mismatching that on the parent table, something that is
closely related to the code being patched. No code change is introduced
though, since that'd be a behavior change that could break some (broken)
working applications.
Amit Langote wrote a less invasive fix for the original
NOT NULL/defaults bug, but while I kept the tests he added, I ended up
not using his original code. Ashutosh Bapat reviewed Amit's fix. Amit
reviewed mine.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Ashutosh Bapat, Amit Langote
Reported-by: Jürgen Strobel (bug #15212)
Discussion: https://postgr.es/m/152746742177.1291.9847032632907407358@wrigleys.postgresql.org
When a partition is created as part of a trigger processing, it is
possible that the partition which just gets created changes the
properties of the table the executor of the ongoing command relies on,
causing a subsequent crash. This has been found possible when for
example using a BEFORE INSERT which creates a new partition for a
partitioned table being inserted to.
Any attempt to do so is blocked when working on a partition, with
regression tests added for both CREATE TABLE PARTITION OF and ALTER
TABLE ATTACH PARTITION.
Reported-by: Dmitry Shalashov
Author: Amit Langote
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/15437-3fe01ee66bd1bae1@postgresql.org
Backpatch-through: 10
When creating partitioned indexes, the tablespace was not being saved
for the parent index. This meant that subsequently created partitions
would not use the right tablespace for their indexes.
ALTER INDEX SET TABLESPACE and ALTER INDEX ALL IN TABLESPACE raised
errors when tried; fix them too. This requires bespoke code for
ATExecCmd() that applies to the special case when the tablespace move is
just a catalog change.
Discussion: https://postgr.es/m/20181102003138.uxpaca6qfxzskepi@alvherre.pgsql
All existing uses can get this information more easily from the
relation descriptor, so the detour through the syscache is not
necessary.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
There was no code to handle foreign key constraints on partitioned
tables in the case of ALTER TABLE DETACH; and if you happened to ATTACH
a partition that already had an equivalent constraint, that one was
ignored and a new constraint was created. Adding this to the fact that
foreign key cloning reuses the constraint name on the partition instead
of generating a new name (as it probably should, to cater to SQL
standard rules about constraint naming within schemas), the result was a
pretty poor user experience -- the most visible failure was that just
detaching a partition and re-attaching it failed with an error such as
ERROR: duplicate key value violates unique constraint "pg_constraint_conrelid_contypid_conname_index"
DETAIL: Key (conrelid, contypid, conname)=(26702, 0, test_result_asset_id_fkey) already exists.
because it would try to create an identically-named constraint in the
partition. To make matters worse, if you tried to drop the constraint
in the now-independent partition, that would fail because the constraint
was still seen as dependent on the constraint in its former parent
partitioned table:
ERROR: cannot drop inherited constraint "test_result_asset_id_fkey" of relation "test_result_cbsystem_0001_0050_monthly_2018_09"
This fix attacks the problem from two angles: first, when the partition
is detached, the constraint is also marked as independent, so the drop
now works. Second, when the partition is re-attached, we scan existing
constraints searching for one matching the FK in the parent, and if one
exists, we link that one to the parent constraint. So we don't end up
with a duplicate -- and better yet, we don't need to scan the referenced
table to verify that the constraint holds.
To implement this I made a small change to previously planner-only
struct ForeignKeyCacheInfo to contain the constraint OID; also relcache
now maintains the list of FKs for partitioned tables too.
Backpatch to 11.
Reported-by: Michael Vitale (bug #15425)
Discussion: https://postgr.es/m/15425-2dbc9d2aa999f816@postgresql.org
Error messages for creating a foreign key on a partitioned table using
ONLY or NOT VALID were wrong in mentioning the objects they worked on.
This commit adds on the way some regression tests missing for those
cases.
Author: Laurenz Albe
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/c11c05810a9ed65e9b2c817a9ef442275a32fe80.camel@cybertec.at
Commit 2fbdf1b38b changed the order in which we inserted catalog rows
when creating partitions, so that we could remove an unsightly hack
required for untimely relcache invalidations. However, that commit only
changed the ordering for CREATE TABLE PARTITION OF, and left ALTER TABLE
ATTACH PARTITION unchanged, so the latter can be affected when catalog
invalidations occur, for instance when the partition key involves an SQL
function.
Reported-by: Rajkumar Raghuwanshi
Author: Amit Langote
Reviewed-by: Michaël Paquier
Discussion: https://postgr.es/m/CAKcux6=nTz9KSfTr_6Z2mpzLJ_09JN-rK6=dWic6gGyTSWueyQ@mail.gmail.com
Index DDL cascading on partitioned tables introduced a way for ALTER
TABLE to be called reentrantly. This caused an an important deficiency
in event trigger support to be exposed: on exiting the reentrant call,
the alter table state object was clobbered, causing a crash when the
outer alter table tries to finalize its processing. Fix the crash by
creating a stack of event trigger state objects. There are still ways
to cause things to misbehave (and probably other crashers) with more
elaborate tricks, but at least it now doesn't crash in the obvious
scenario.
Backpatch to 9.5, where DDL deparsing of event triggers was introduced.
Reported-by: Marco Slot
Authors: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CANNhMLCpi+HQ7M36uPfGbJZEQLyTy7XvX=5EFkpR-b1bo0uJew@mail.gmail.com
This is for example used when attaching a partition to a partitioned
table which includes foreign keys, and in this case the constraint name
has been missing in the data cloned. This could lead to hard crashes,
as when validating the foreign key constraint, the constraint name is
always expected. Particularly, when using log_min_messages >= DEBUG1, a
log message would be generated with this unassigned constraint name,
leading to an assertion failure on HEAD.
While on it, rename a variable in ATExecAttachPartition which was
declared twice with the same name.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20181005042236.GG1629@paquier.xyz
Backpatch-through: 11
If the column being modified is referenced by a foreign key constraint
of another table, ALTER TABLE would open the other table (to re-parse
the constraint's definition) without having first obtained a lock on it.
This was evidently intentional, but that doesn't mean it's really safe.
It's especially not safe in 9.3, which pre-dates use of MVCC scans for
catalog reads, but even in current releases it doesn't seem like a good
idea.
We know we'll need AccessExclusiveLock shortly to drop the obsoleted
constraint, so just get that a little sooner to close the hole.
Per testing with a patch that complains if we open a relation without
holding any lock on it. I don't plan to back-patch that patch, but we
should close the holes it identifies in all supported branches.
Discussion: https://postgr.es/m/2038.1538335244@sss.pgh.pa.us
Add RangeTblEntry.rellockmode, which records the appropriate lock mode for
each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock,
or RowExclusiveLock depending on the RTE's role in the query).
This patch creates the field and makes all creators of RTE nodes fill it
in reasonably, but for the moment nothing much is done with it. The plan
is to replace assorted post-parser logic that re-determines the right
lockmode to use with simple uses of rte->rellockmode. For now, just add
Asserts in each of those places that the rellockmode matches what they are
computing today. (In some cases the match isn't perfect, so the Asserts
are weaker than you might expect; but this seems OK, as per discussion.)
This passes check-world for me, but it seems worth pushing in this state
to see if the buildfarm finds any problems in cases I failed to test.
catversion bump due to change of stored rules.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
When a table ownership is changed, we must apply that also to any owned
sequences. (Otherwise, it would result in a situation that cannot be
restored, because linked sequences must have the same owner as the
table.) But this was previously only applied to regular tables and
materialized views. But it should also apply to at least foreign
tables. This patch removes the relkind check altogether, because it
doesn't save very much and just introduces the possibility of similar
omissions.
Bug: #15238
Reported-by: Christoph Berg <christoph.berg@credativ.de>
Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
When ALTER TABLE ... SET DATA TYPE affects a column referenced by
constraints and indexes, it drop those constraints and indexes and
recreates them afterwards, so that the definitions match the new data
type. The original code did this by dropping one object at a time
(commit 077db40fa1 of May 2004), which worked fine because the
dependencies between the objects were pretty straightforward, and
ordering the objects in a specific way was enough to make this work.
However, when there are foreign key constraints in partitioned tables,
the dependencies are no longer so straightforward, and we were getting
errors when attempted:
ERROR: cache lookup failed for constraint 16398
This can be fixed by doing all the drops in one pass instead, using
performMultipleDeletions (introduced by df18c51f29 of Aug 2006). With
this change we can also remove the code to carefully order the list of
objects to be deleted.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKcux6nWS_m+s=1Udk_U9B+QY7pA-Ac58qR5BdUfOyrwnWHDew@mail.gmail.com
In the original code, we were storing the pg_inherits row for a
partitioned table too early: enough that we had a hack for relcache to
avoid falling flat on its face while reading such a partial entry. If
we finish the pg_class creation first and *then* store the pg_inherits
entry, we don't need that hack.
Also recognize that pg_class.relpartbound is not marked NOT NULL and
therefore it's entirely possible to read null values, so having only
Assert() protection isn't enough. Change those to if/elog tests
instead. This qualifies as a robustness fix, so backpatch to pg11.
In passing, remove one access that wasn't actually needed, and reword
one message to be like all the others that check for the same thing.
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20180903213916.hh6wasnrdg6xv2ud@alvherre.pgsql
It's been true for a long time that we expect names of table and domain
constraints to be unique among the constraints of that table or domain.
However, the enforcement of that has been pretty haphazard, and it missed
some corner cases such as creating a CHECK constraint and then an index
constraint of the same name (as per recent report from André Hänsel).
Also, due to the lack of an actual unique index enforcing this, duplicates
could be created through race conditions.
Moreover, the code that searches pg_constraint has been quite inconsistent
about how to handle duplicate names if one did occur: some places checked
and threw errors if there was more than one match, while others just
processed the first match they came to.
To fix, create a unique index on (conrelid, contypid, conname). Since
either conrelid or contypid is zero, this will separately enforce
uniqueness of constraint names among constraints of any one table and any
one domain. (If we ever implement SQL assertions, and put them into this
catalog, more thought might be needed. But it'd be at least as reasonable
to put them into a new catalog; having overloaded this one catalog with
two kinds of constraints was a mistake already IMO.) This index can replace
the existing non-unique index on conrelid, though we need to keep the one
on contypid for query performance reasons.
Having done that, we can simplify the logic in various places that either
coped with duplicates or neglected to, as well as potentially improve
lookup performance when searching for a constraint by name.
Also, as per our usual practice, install a preliminary check so that you
get something more friendly than a unique-index violation report in the
case complained of by André. And teach ChooseIndexName to avoid choosing
autogenerated names that would draw such a failure.
While it's not possible to make such a change in the back branches,
it doesn't seem quite too late to put this into v11, so do so.
Discussion: https://postgr.es/m/0c1001d4428f$0942b430$1bc81c90$@webkr.de
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Add support for error position reporting for the expressions contained
in defaults and check constraint definitions. This currently works only
for CREATE TABLE, not ALTER TABLE, because the latter is not set up to
pass around the original query string.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot. A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
- GetConfigOptionByNum should translate strings. This part is not
back-patched as after a minor upgrade this could be surprising for
users.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3
InsertPgAttributeTuple() is the interface between in-memory tuple
descriptors and on-disk pg_attribute, so it makes sense to give it the
job of resetting attcacheoff. This avoids having all the callers having
to do so.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
A caller of TRUNCATE could previously queue for an access exclusive lock
on a relation it may not have permission to truncate, potentially
interfering with users authorized to work on it. This can be very
intrusive depending on the lock attempted to be taken. For example,
pg_authid could be blocked, preventing any authentication attempt to
happen on a PostgreSQL instance.
This commit fixes the case of TRUNCATE so as RangeVarGetRelidExtended is
used with a callback doing the necessary ACL checks at an earlier stage,
avoiding lock queuing issues, so as an immediate failure happens for
unprivileged users instead of waiting on a lock that would not be
taken.
This is rather similar to the type of work done in cbe24a6 for CLUSTER,
and the code of TRUNCATE is this time refactored so as there is no
user-facing changes. As the commit for CLUSTER, no back-patch is done.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180806165816.GA19883@paquier.xyz
transformPartitionSpec rejected duplicate simple partition columns
(e.g., "PARTITION BY RANGE (x,x)") but paid no attention to expression
columns, resulting in inconsistent behavior. Worse, cases like
"PARTITION BY RANGE (x,(x))") were accepted but would then result in
dump/reload failures, since the expression (x) would get simplified
to a plain column later.
There seems no better reason for this restriction than there was for
the one against duplicate included index columns (cf commit 701fd0bbc),
so let's just remove it.
Back-patch to v10 where this code was added.
Report and patch by Yugo Nagata.
Discussion: https://postgr.es/m/20180712165939.36b12aff.nagata@sraoss.co.jp
The existing error message was complaining that the column is not an
expression, which is not correct. Introduce a suitable wording
variation and a test.
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20180628182803.e4632d5a.nagata@sraoss.co.jp
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
When truncating a table that is referenced by foreign keys in
partitioned tables, the check to ensure the referencing table are also
truncated spuriously failed. This is because it was relying on
relhastriggers as a proxy for the table having FKs, and that's wrong for
partitioned tables. Fix it to consider such tables separately. There
may be a better way ... but this code is pretty inefficient already.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180711000624.zmeizicibxeehhsg@alvherre.pgsql
Since their introduction, partition trees have been a bit lossy
regarding temporary relations. Inheritance trees respect the following
patterns:
1) a child relation can be temporary if the parent is permanent.
2) a child relation can be temporary if the parent is temporary.
3) a child relation cannot be permanent if the parent is temporary.
4) The use of temporary relations also imply that when both parent and
child need to be from the same sessions.
Partitions share many similar patterns with inheritance, however the
handling of the partition bounds make the situation a bit tricky for
case 1) as the partition code bases a lot of its lookup code upon
PartitionDesc which does not really look after relpersistence. This
causes for example a temporary partition created by session A to be
visible by another session B, preventing this session B to create an
extra partition which overlaps with the temporary one created by A with
a non-intuitive error message. There could be use-cases where mixing
permanent partitioned tables with temporary partitions make sense, but
that would be a new feature. Partitions respect 2), 3) and 4) already.
It is a bit depressing to see those error checks happening in
MergeAttributes() whose purpose is different, but that's left as future
refactoring work.
Back-patch down to 10, which is where partitioning has been introduced,
except that default partitions do not apply there. Documentation also
includes limitations related to the use of temporary tables with
partition trees.
Reported-by: David Rowley
Author: Amit Langote, Michael Paquier
Reviewed-by: Ashutosh Bapat, Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f94Ojk0og9GMkRHGt8wHTW=ijq5KzJKuoBoqWLwSVwGmw@mail.gmail.com
It might be impossible for this to cause a problem in non-debug builds,
since there'd be no opportunity for the relcache entry to get recycled
before the fetch. It blows up nicely with -DRELCACHE_FORCE_RELEASE plus
valgrind, though.
Evidently introduced by careless refactoring in commit f0e44751d.
Back-patch accordingly.
Discussion: https://postgr.es/m/27543.1528758304@sss.pgh.pa.us
Oversight in commit 8b08f7d4820f: pg_class.relispartition was not
being set for index partitions, which is a bit odd, and was also causing
the code to unnecessarily call has_superclass() when simply checking the
flag was enough.
Author: Álvaro Herrera
Reported-by: Amit Langote
Discussion: https://postgr.es/m/12085bc4-0bc6-0f3a-4c43-57fe0681772b@lab.ntt.co.jp
If the table being attached contained values that contradict the default
partition's partition constraint, it would fail to complain, because
CommandCounterIncrement changes in 4dba331cb3 coupled with some bogus
coding in the existing ValidatePartitionConstraints prevented the
partition constraint from being validated after all -- or rather, it
caused to constraint to become an empty one, always succeeding.
Fix by not re-reading the OID of the default partition in
ATExecAttachPartition. To forestall similar problems, revise the
existing code:
* rename routine from ValidatePartitionConstraints() to
QueuePartitionConstraintValidation, to better represent what it
actually does.
* add an Assert() to make sure that when queueing a constraint for a
partition we're not overwriting a constraint previously queued.
* add an Assert() that we don't try to invoke the special-purpose
validation of the default partition when attaching the default
partition itself.
While at it, change some loops to obtain partition OIDs from
partdesc->oids rather than find_all_inheritors; reduce the lock level
of partitions being scanned from AccessExclusiveLock to ShareLock;
rewrite QueuePartitionConstraintValidation in a recursive fashion rather
than repetitive.
Author: Álvaro Herrera. Tests written by Amit Langote
Reported-by: Rushabh Lathia
Diagnosed-by: Kyotaro HORIGUCHI, who also provided the initial fix.
Reviewed-by: Kyotaro HORIGUCHI, Amit Langote, Jeevan Ladhe
Discussion: https://postgr.es/m/CAGPqQf0W+v-Ci_qNV_5R3A=Z9LsK4+jO7LzgddRncpp_rrnJqQ@mail.gmail.com
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Trigger cloning to partitions was supposed to occur for user-visible
triggers only, but during development the protection that prevented it
from occurring to internal triggers was lost. Reinstate it, as well as
add a test case to ensure internal triggers (in the tested case,
triggers implementing a deferred unique constraint) are not cloned.
Without the code fix, the partitions in the test end up with different
numbers of triggers, which is clearly wrong ...
Bug in 86f575948c.
Discussion: https://postgr.es/m/20180403214903.ozfagwjcpk337uw7@alvherre.pgsql
A followup patch will add a SKIP_LOCKED option. To avoid introducing
evermore arguments, breaking existing callers each time, introduce a
flags argument. This'll no doubt break a few external users...
Also change the MISSING_OK behaviour so a DEBUG1 debug message is
emitted when a relation is not found.
Author: Nathan Bossart
Reviewed-By: Michael Paquier and Andres Freund
Discussion: https://postgr.es/m/20180306005349.b65whmvj7z6hbe2y@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
My commit 4dba331cb3 that moved around CommandCounterIncrement calls
in partitioning DDL code unearthed a problem with the relcache handling
for the 'default' partition: the construction of a correct relcache
entry for the partitioned table was at the mercy of lack of CCI calls in
non-trivial amounts of code. This was prone to creating problems later
on, as the code develops. This was visible as a test failure in a
compile with RELCACHE_FORCE_RELASE (buildfarm member prion).
The problem is that after the mentioned commit it was possible to create
a relcache entry that had incomplete information regarding the default
partition because I introduced a CCI between adding the catalog entries
for the default partition (StorePartitionBound) and the update of
pg_partitioned_table entry for its parent partitioned table
(update_default_partition_oid). It seems the best fix is to move the
latter so that it occurs inside the former; the purposeful lack of
intervening CCI should be more obvious, and harder to break.
I also remove a check in RelationBuildPartitionDesc that returns NULL if
the key is not set. I couldn't find any place that needs this hack
anymore; probably it was required because of bugs that have since been
fixed.
Fix a few typos I noticed while reviewing the code involved.
Discussion: https://postgr.es/m/20180320182659.nyzn3vqtjbbtfgwq@alvherre.pgsql
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
It makes sense to do the CCIs in the places that do catalog updates,
rather than before the places that error out because the former ones
fail to do it. In particular, it looks like StorePartitionBound() and
IndexSetParentIndex() ought to make their own CCIs.
Per review comments from Peter Eisentraut for row-level triggers on
partitioned tables.
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
If a table containing a primary key is attach as partition to a
partitioned table which has a primary key with a different definition,
we would happily create a second one in the new partition. Oops. It
turns out that this is because an error check in DefineIndex is executed
only if you tell it that it's being run by ALTER TABLE, and the original
code here wasn't. Change it so that it does.
Added a couple of test cases for this, also. A previously working test
started to fail in a different way than before patch because the new
check is called earlier; change the PK to plain UNIQUE so that the new
behavior isn't invoked, so that the test continues to verify what we
want it to verify.
Reported by: Noriyoshi Shinoda
Discussion: https://postgr.es/m/DF4PR8401MB102060EC2615EC9227CC73F7EEDF0@DF4PR8401MB1020.NAMPRD84.PROD.OUTLOOK.COM
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/24475.1520635069@sss.pgh.pa.us
Commit b08df9cab left things rather poorly documented as far as the
exact semantics of "clause_is_check" mode went. Also, that mode did
not really work correctly for predicate_refuted_by; although given the
lack of specification as to what it should do, as well as the lack
of any actual use-case, that's perhaps not surprising.
Rename "clause_is_check" to "weak" proof mode, and provide specifications
for what it should do. I defined weak refutation as meaning "truth of A
implies non-truth of B", which makes it possible to use the mode in the
part of relation_excluded_by_constraints that checks for mutually
contradictory WHERE clauses. Fix up several places that did things wrong
for that definition. (As far as I can see, these errors would only lead
to failure-to-prove, not incorrect claims of proof, making them not
serious bugs even aside from the fact that v10 contains no use of this
mode. So there seems no need for back-patching.)
In addition, teach predicate_refuted_by_recurse that it can use
predicate_implied_by_recurse after all when processing a strong NOT-clause,
so long as it asks for the correct proof strength. This is an optimization
that could have been included in commit b08df9cab, but wasn't.
Also, simplify and generalize the logic that checks for whether nullness of
the argument of IS [NOT] NULL would force overall nullness of the predicate
or clause. (This results in a change in the partition_prune test's output,
as it is now able to prune an all-nulls partition that it did not recognize
before.)
In passing, in PartConstraintImpliedByRelConstraint, remove bogus
conversion of the constraint list to explicit-AND form and then right back
again; that accomplished nothing except forcing a useless extra level of
recursion inside predicate_implied_by.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
If we restrict unique constraints on partitioned tables so that they
must always include the partition key, then our standard approach to
unique indexes already works --- each unique key is forced to exist
within a single partition, so enforcing the unique restriction in each
index individually is enough to have it enforced globally. Therefore we
can implement unique indexes on partitions by simply removing a few
restrictions (and adding others.)
Discussion: https://postgr.es/m/20171222212921.hi6hg6pem2w2t36z@alvherre.pgsql
Discussion: https://postgr.es/m/20171229230607.3iib6b62fn3uaf47@alvherre.pgsql
Reviewed-by: Simon Riggs, Jesper Pedersen, Peter Eisentraut, Jaime
Casanova, Amit Langote
Investigation of 2d2d06b7e2 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
We have a lot of code in which option names, which from the user's
viewpoint are logically keywords, are passed through the grammar as plain
identifiers, and then matched to string literals during command execution.
This approach avoids making words into lexer keywords unnecessarily. Some
places matched these strings using plain strcmp, some using pg_strcasecmp.
But the latter should be unnecessary since identifiers would have been
downcased on their way through the parser. Aside from any efficiency
concerns (probably not a big factor), the lack of consistency in this area
creates a hazard of subtle bugs due to different places coming to different
conclusions about whether two option names are the same or different.
Hence, standardize on using strcmp() to match any option names that are
expected to have been fed through the parser.
This does create a user-visible behavioral change, which is that while
formerly all of these would work:
alter table foo set (fillfactor = 50);
alter table foo set (FillFactor = 50);
alter table foo set ("fillfactor" = 50);
alter table foo set ("FillFactor" = 50);
now the last case will fail because that double-quoted identifier is
different from the others. However, none of our documentation says that
you can use a quoted identifier in such contexts at all, and we should
discourage doing so since it would break if we ever decide to parse such
constructs as true lexer keywords rather than poor man's substitutes.
So this shouldn't create a significant compatibility issue for users.
Daniel Gustafsson, reviewed by Michael Paquier, small changes by me
Discussion: https://postgr.es/m/29405B24-564E-476B-98C0-677A29805B84@yesql.se
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
For no apparent reason, this function was using a 16bit-wide inhseqno
value, rather than the correct 32 bit width which is what is stored in
the pg_inherits catalog. This becomes evident if you try to create a
table with more than 65535 parents, because this error appears:
ERROR: duplicate key value violates unique constraint «pg_inherits_relid_seqno_index»
DETAIL: Key (inhrelid, inhseqno)=(329371, 0) already exists.
Needless to say, having so many parents is an uncommon situations, which
explains why this error has never been reported despite being having
been introduced with the Postgres95 1.01 sources in commit d31084e9d111:
https://git.postgresql.org/gitweb/?p=postgresql.git;a=blob;f=src/backend/commands/creatinh.c;hb=d31084e9d111#l349
Backpatch all the way back.
David Rowley noticed this while reviewing a patch of mine.
Discussion: https://postgr.es/m/CAKJS1f8Dn7swSEhOWwzZzssW7747YB=2Hi+T7uGud40dur69-g@mail.gmail.com
Michael Paquier
Andres Freund
Tom Lane
Heikki Linnakangas
Alvaro Herrera
Peter Eisentraut
David Rowley
Noah Misch
Alexander Korotkov
Amit Kapila
Fujii Masao
Bruce Momjian
Joe Conway
Robert Haas
Andrew Dunstan
Peter Eisentraut
Greg Stark
Magnus Hagander
Teodor Sigaev