Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
Add a high level description of our implementation of the hybrid hash
join algorithm to the block comment in nodeHashjoin.c.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20230516160051.4267a800%40karst
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
The problem that these messages protect against can only occur because
a corrupted hash spill file was written, i.e., a Postgres bug. There's
no reason to have them as translatable.
Backpatch to 15, where these messages were changed by commit c4649cce39.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20230510175407.dwa5v477pw62ikyx@alvherre.pgsql
RI_Initial_Check was setting up a list of RTEPermissionInfo for
ExecCheckPermissions() wrong, and the problem is subtle enough that it
doesn't have any immediate effect in core code. However, if an
extension is using the ExecutorCheckPerms_hook, then it would get the
wrong parameters and perhaps arrive at a wrong conclusion, or outright
malfunction. Fix by constructing that list and the RTE list more
honestly.
We also add an assertion check to verify that these lists match. This
new assertion would have caught this bug.
Co-authored-by: Олег Целебровский (Oleg Tselebrovskii) <o.tselebrovskiy@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/3722b7a2cbe27a1796ee40824bd86dd1@postgrespro.ru
The leak would show up when using batch inserts with foreign tables
included in a partition tree, as the slots used in the batch were not
reset once processed. In order to fix this problem, some
ExecClearTuple() are added to clean up the slots used once a batch is
filled and processed, mapping with the number of slots currently in use
as tracked by the counter ri_NumSlots.
This buffer refcount leak has been introduced in b676ac4 with the
addition of the executor facility to improve bulk inserts for FDWs, so
backpatch down to 14.
Alexander has provided the patch (slightly modified by me). The test
for postgres_fdw comes from me, based on the test case that the author
has sent in the report.
Author: Alexander Pyhalov
Discussion: https://postgr.es/m/b035780a740efd38dc30790c76927255@postgrespro.ru
Backpatch-through: 14
The name of this function suggests that it ought to reparent R/W
expanded objects to be children of the persistent aggcontext, instead
of copying them. In fact it does no such thing, and if you try to
make it do so you will see multiple regression failures. Rename it
to the less-misleading ExecAggCopyTransValue, and add commentary
about why that attractive-sounding optimization won't work. Also
adjust comments at call sites, some of which were describing logic
that has since been moved into ExecAggCopyTransValue.
Discussion: https://postgr.es/m/3004282.1681930251@sss.pgh.pa.us
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
The finalfunc might return a read-write expanded object. If we
de-duplicate multiple call sites for the aggregate, any function(s)
receiving the aggregate result earlier could alter or destroy the
value that reaches the ones called later. This is a brown-paper-bag
bug in commit 42b746d4c, because we actually considered the need
for read-only-ness but failed to realize that it applied to the case
with a finalfunc as well as the case without.
Per report from Justin Pryzby. New error in HEAD,
no need for back-patch.
Discussion: https://postgr.es/m/ZDm5TuKsh3tzoEjz@telsasoft.com
Commit 3e310d837 taught isAssignmentIndirectionExpr() to look through
CoerceToDomain nodes. That's not sufficient, because since commit
04fe805a1 it's been possible for the planner to simplify
CoerceToDomain to RelabelType when the domain has no constraints
to enforce. So we need to look through RelabelType too.
Per bug #17897 from Alexander Lakhin. Although 3e310d837 was
back-patched to v11, it seems sufficient to apply this change
to v12 and later, since 04fe805a1 came in in v12.
Dmitry Dolgov
Discussion: https://postgr.es/m/17897-4216c546c3874044@postgresql.org
Hash join tuples reuse the HOT status bit to indicate match status
during hash join execution. Correct reuse requires clearing the bit in
all tuples. Serial hash join and parallel multi-batch hash join do so
upon inserting the tuple into the hashtable. Single batch parallel hash
join and batch 0 of unexpected multi-batch hash joins forgot to do this.
It hadn't come up before because hashtable tuple match bits are only
used for right and full outer joins and parallel ROJ and FOJ were
unsupported. 11c2d6fdf5 introduced support for parallel ROJ/FOJ but
neglected to ensure the match bits were reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/flat/CAMbWs48Nde1Mv%3DBJv6_vXmRKHMuHZm2Q_g4F6Z3_pn%2B3EV6BGQ%40mail.gmail.com
We can't assert that we're the only process attached to a barrier after
BarrierArriveAndDetachExceptLast(). Although that'll be true almost
always, a late-starting parallel worker can attach very briefly (that
is, immediately detach after checking the phase) right at that moment.
BarrierArriveAndDetachExceptLast() already contains an assertion like
that, but it holds a spinlock preventing the race. This thinko caused a
one-off failure on build farm animal chimaera.
Diagnosed-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3590249.1680971629@sss.pgh.pa.us
pg_stat_statements relies on EState->es_processed to count the number of
rows processed by ExecutorRun(). This proves to be a problem under the
extended query protocol when the result of a query is fetched through
more than one call of ExecutorRun(), as es_processed is reset each time
ExecutorRun() is called. This causes pg_stat_statements to report the
number of rows calculated in the last execute fetch, rather than the
global sum of all the rows processed.
As pquery.c tells, this is a problem when a portal does not use
holdStore. For example, DMLs with RETURNING would report a correct
tuple count as these do one execution cycle when the query is first
executed to fill in the portal's store with one ExecutorRun(), feeding
on the portal's store for each follow-up execute fetch depending on the
fetch size requested by the client.
The fix proposed for this issue is simple with the addition of an extra
counter in EState that's preserved across multiple ExecutorRun() calls,
incremented with the value calculated in es_processed. This approach is
not back-patchable, unfortunately.
Note that libpq does not currently give any way to control the fetch
size when using the extended v3 protocol, meaning that in-core testing
is not possible yet. This issue can be easily verified with the JDBC
driver, though, with *autocommit disabled*. Hence, having in-core tests
requires more features, left for future discussion:
- At least two new libpq routines splitting PQsendQueryGuts(), one for
the bind/describe and a second for a series of execute fetches with a
custom fetch size, likely in a fashion similar to what JDBC does.
- A psql meta-command for the execute phase. This part is not strictly
mandatory, still it could be handy.
Reported-by: Andrew Dunstan (original discovery by Simon Siggs)
Author: Sami Imseih
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/EBE6C507-9EB6-4142-9E4D-38B1673363A7@amazon.com
Discussion: https://postgr.es/m/c90890e7-9c89-c34f-d3c5-d5c763a34bd8@dunslane.net
Merge and hash joins can support antijoin with the non-nullable input
on the right, using very simple combinations of their existing logic
for right join and anti join. This gives the planner more freedom
about how to order the join. It's particularly useful for hash join,
since we may now have the option to hash the smaller table instead
of the larger.
Richard Guo, reviewed by Ronan Dunklau and myself
Discussion: https://postgr.es/m/CAMbWs48xh9hMzXzSy3VaPzGAz+fkxXXTUbCLohX1_L8THFRm2Q@mail.gmail.com
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Full and right outer joins were not supported in the initial
implementation of Parallel Hash Join because of deadlock hazards (see
discussion). Therefore FULL JOIN inhibited parallelism, as the other
join strategies can't do that in parallel either.
Add a new PHJ phase PHJ_BATCH_SCAN that scans for unmatched tuples on
the inner side of one batch's hash table. For now, sidestep the
deadlock problem by terminating parallelism there. The last process to
arrive at that phase emits the unmatched tuples, while others detach and
are free to go and work on other batches, if there are any, but
otherwise they finish the join early.
That unfairness is considered acceptable for now, because it's better
than no parallelism at all. The build and probe phases are run in
parallel, and the new scan-for-unmatched phase, while serial, is usually
applied to the smaller of the two relations and is either limited by
some multiple of work_mem, or it's too big and is partitioned into
batches and then the situation is improved by batch-level parallelism.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BA6ftXPz4oe92%2Bx8Er%2BxpGZqto70-Q_ERwRaSyA%3DafNg%40mail.gmail.com
The tts_flag is named TTS_FLAG_SHOULDFREE, so use that instead of
TTS_SHOULDFREE, which is the name of the macro that checks for that flag.
Additionally, 4da597edf got rid of the TupleTableSlot.tts_tuple field but
forgot to update a comment which referenced that field. Fix that.
Reported-by: Zhen Mingyang <zhenmingyang@yeah.net>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/1a96696c.9d3.187193989c3.Coremail.zhenmingyang@yeah.net
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
In ancient times, these belonged to arguments or fields that were
actually of type long, but now they are not anymore, so this "L"
decoration is just confusing. (Some other 0L and other "L" constants
remain, where they are actually associated with a long type.)
The nested-arrays code path in ExecEvalArrayExpr() used palloc to
allocate the result array, whereas every other array-creating function
has used palloc0 since 18c0b4ecc. This mostly works, but unused bits
past the end of the nulls bitmap may end up undefined. That causes
valgrind complaints with -DWRITE_READ_PARSE_PLAN_TREES, and could
cause planner misbehavior as cited in 18c0b4ecc. There seems no very
good reason why we should strive to avoid palloc0 in just this one case,
so fix it the easy way with s/palloc/palloc0/.
While looking at that I noted that we also failed to check for overflow
of "nbytes" and "nitems" while summing the sizes of the sub-arrays,
potentially allowing a crash due to undersized output allocation.
For "nbytes", follow the policy used by other array-munging code of
checking for overflow after each addition. (As elsewhere, the last
addition of the array's overhead space doesn't need an extra check,
since palloc itself will catch a value between 1Gb and 2Gb.)
For "nitems", there's no very good reason to sum the inputs at all,
since we can perfectly well use ArrayGetNItems' result instead of
ignoring it.
Per discussion of this bug, also remove redundant zeroing of the
nulls bitmap in array_set_element and array_set_slice.
Patch by Alexander Lakhin and myself, per bug #17858 from Alexander
Lakhin; thanks also to Richard Guo. These bugs are a dozen years old,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17858-8fd287fd3663d051@postgresql.org
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having generated columns. We didn't use to ignore
generated columns while doing tuple comparison among the tuples from
the publisher and subscriber during apply of updates and deletes.
Author: Onder Kalaci
Reviewed-by: Shi yu, Amit Kapila
Backpatch-through: 12
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
* Commit 3048898e dropped -ING from PHJ wait event names. Update the
corresponding barrier phases names to match.
* Rename the "DONE" phases to "FREE". That's symmetrical with
"ALLOCATE", and names the activity that actually happens in that phase
(as we do for the other phases) rather than a state. The bug fixed by
commit 8d578b9b might have been more obvious with this name.
* Rename the batch/bucket growth barriers' "ALLOCATE" phases to
"REALLOCATE", a better description of what they do.
* Update the high level comments about phases to highlight phases
are executed by a single process with an asterisk (mostly memory
management phases).
No behavior change, as this is just improving internal identifiers. The
only user-visible sign of this is that a couple of wait events' display
names change from "...Allocate" to "...Reallocate" in pg_stat_activity,
to stay in sync with the internal names.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This patch eliminates step 2 by taking the lock during first
tuple_update()/tuple_delete() call. Heap table access method saves some
efforts by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
When we lock tuple using table_tuple_lock() then we at the same time fetch
the locked tuple to the slot. In this case we can skip extra
table_tuple_fetch_row_version() thank to we've already fetched the 'old' tuple
and nobody can change it concurrently since it's locked.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having dropped columns. We didn't use to ignore dropped
columns while doing tuple comparison among the tuples from the publisher
and subscriber during apply of updates and deletes.
Author: Onder Kalaci, Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
With unlucky timing and parallel_leader_participation=off (not the
default), PHJ could attempt to access per-batch shared state just as it
was being freed. There was code intended to prevent that by checking
for a cleared pointer, but it was racy. Fix, by introducing an extra
barrier phase. The new phase PHJ_BUILD_RUNNING means that it's safe to
access the per-batch state to find a batch to help with, and
PHJ_BUILD_DONE means that it is too late. The last to detach will free
the array of per-batch state as before, but now it will also atomically
advance the phase, so that late attachers can avoid the hazard. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
An earlier attempt to fix this (commit 3b8981b6, later reverted) missed
one special case. When the inner side is empty (the "empty inner
optimization), the build barrier would only make it to
PHJ_BUILD_HASHING_INNER phase before workers attempted to detach from
the hashtable. In that case, fast-forward the build barrier to
PHJ_BUILD_RUNNING before proceeding, so that our later assertions hold
and we can still negotiate who is cleaning up.
Revealed by build farm failures, where BarrierAttach() failed a sanity
check assertion, because the memory had been clobbered by dsa_free().
In non-assert builds, the result could be a segmentation fault.
Back-patch to all supported releases.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reported-by: David Geier <geidav.pg@gmail.com>
Tested-by: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
When probing the Memoize cache to check if the current cache key values
exist in the cache, we perform an evaluation of the expressions making up
the cache key before probing the hash table for those values. This
operation could leak memory as it is possible that the cache key is an
expression which requires allocation of memory, as was the case in bug
17844.
Here we fix this by correctly switching to the per tuple context before
evaluating the cache expressions so that the memory is freed next time the
per tuple context is reset.
Bug: 17844
Reported-by: Alexey Ermakov
Discussion: https://postgr.es/m/17844-d2f6f9e75a622bed@postgresql.org
Backpatch-through: 14, where Memoize was introduced
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
Using REPLICA IDENTITY FULL on the publisher can lead to a full table scan
per tuple change on the subscription when REPLICA IDENTITY or PK index is
not available. This makes REPLICA IDENTITY FULL impractical to use apart
from some small number of use cases.
This patch allows using indexes other than PRIMARY KEY or REPLICA
IDENTITY on the subscriber during apply of update/delete. The index that
can be used must be a btree index, not a partial index, and it must have
at least one column reference (i.e. cannot consist of only expressions).
We can uplift these restrictions in the future. There is no smart
mechanism to pick the index. If there is more than one index that
satisfies these requirements, we just pick the first one. We discussed
using some of the optimizer's low-level APIs for this but ruled it out
as that can be a maintenance burden in the long run.
This patch improves the performance in the vast majority of cases and the
improvement is proportional to the amount of data in the table. However,
there could be some regression in a small number of cases where the indexes
have a lot of duplicate and dead rows. It was discussed that those are
mostly impractical cases but we can provide a table or subscription level
option to disable this feature if required.
Author: Onder Kalaci, Amit Kapila
Reviewed-by: Peter Smith, Shi yu, Hou Zhijie, Vignesh C, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/CACawEhVLqmAAyPXdHEPv1ssU2c=dqOniiGz7G73HfyS7+nGV4w@mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed in the case where UPDATEs or DELETEs are skipped
due to a BEFORE ROW trigger returning NULL (the INSERT case was
already handled correctly by ExecMergeNotMatched() calling
ExecInsert()).
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCU8XEmR0JWKDtyb7iZ%3DqCffxS9uyJt0iOZ4TV4RT%2Bow1w%40mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
If UPDATE is forced to retry after an EvalPlanQual check, it neglected
to repeat GENERATED-column computations, even though those might well
have changed since we're dealing with a different tuple than before.
Fixing this is mostly a matter of looping back a bit further when
we retry. In v15 and HEAD that's most easily done by altering the API
of ExecUpdateAct so that it includes computing GENERATED expressions.
Also, if an UPDATE in a partitioned table turns into a cross-partition
INSERT operation, we failed to recompute GENERATED columns. That's a
bug since 8bf6ec3ba allowed partitions to have different generation
expressions; although it seems to have no ill effects before that.
Fixing this is messier because we can now have situations where the same
query needs both the UPDATE-aligned set of GENERATED columns and the
INSERT-aligned set, and it's unclear which set will be generated first
(else we could hack things by forcing the INSERT-aligned set to be
generated, which is indeed how fe9e658f4 made it work for MERGE).
The best fix seems to be to build and store separate sets of expressions
for the INSERT and UPDATE cases. That would create ABI issues in the
back branches, but so far it seems we can leave this alone in the back
branches.
Per bug #17823 from Hisahiro Kauchi. The first part of this affects all
branches back to v12 where GENERATED columns were added.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
While testing a fix for bug #17823, I discovered that EvalPlanQualStart
failed to copy es_rteperminfos from the parent EState, resulting in
failure if anything in EPQ execution wanted to consult that information.
This led me to conclude that commit a61b1f748 had been too haphazard
about where to fill es_rteperminfos, and that we need to be sure that
that happens exactly where es_range_table gets filled. So I changed the
signature of ExecInitRangeTable to help ensure that this new requirement
doesn't get missed. (Indeed, pgoutput.c was also failing to fill it.
Maybe we don't ever need it there, but I wouldn't bet on that.)
No test case yet; one will arrive with the fix for #17823.
But that needs to be back-patched, while this fix is HEAD-only.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
nodeAppend.c used non-nullness of appendstate->as_valid_subplans as
a state flag to indicate whether it'd done ExecFindMatchingSubPlans
(or some sufficient approximation to that). This was pretty
questionable even in the beginning, since it wouldn't really work
right if there are no valid subplans. It got more questionable
after commit 27e1f1456 added logic that could reduce as_valid_subplans
to an empty set: at that point we were depending on unspecified
behavior of bms_del_members, namely that it'd not return an empty
set as NULL. It's about to start doing that, which breaks this
logic entirely. Hence, add a separate boolean flag to signal
whether as_valid_subplans has been computed.
Also fix a previously-cosmetic bug in nodeAgg.c, wherein it ignored
the return value of bms_del_member instead of updating its pointer.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
This function has been semi-deprecated ever since we invented
bms_next_member(). Its habit of scribbling on the input bitmapset
isn't great, plus for sufficiently large bitmapsets it would take
O(N^2) time to complete a loop. Now we have the additional problem
that reducing the input to empty while leaving it still accessible
would violate a planned invariant. So let's just get rid of it,
after updating the few extant callers to use bms_next_member().
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
Tom Lane
Tomas Vondra
Peter Eisentraut
Michael Paquier
Alvaro Herrera
David Rowley
Thomas Munro
Alexander Korotkov
Daniel Gustafsson
Amit Kapila
Dean Rasheed