This patch does three interrelated things:
* Create a new expression execution step type EEOP_PARAM_CALLBACK
and add the infrastructure needed for add-on modules to generate that.
As discussed, the best control mechanism for that seems to be to add
another hook function to ParamListInfo, which will be called by
ExecInitExpr if it's supplied and a PARAM_EXTERN Param is found.
For stand-alone expressions, we add a new entry point to allow the
ParamListInfo to be specified directly, since it can't be retrieved
from the parent plan node's EState.
* Redesign the API for the ParamListInfo paramFetch hook so that the
ParamExternData array can be entirely virtual. This also lets us get rid
of ParamListInfo.paramMask, instead leaving it to the paramFetch hook to
decide which param IDs should be accessible or not. plpgsql_param_fetch
was already doing the identical masking check, so having callers do it too
seemed redundant. While I was at it, I added a "speculative" flag to
paramFetch that the planner can specify as TRUE to avoid unwanted failures.
This solves an ancient problem for plpgsql that it couldn't provide values
of non-DTYPE_VAR variables to the planner for fear of triggering premature
"record not assigned yet" or "field not found" errors during planning.
* Rework plpgsql to get rid of the need for "unshared" parameter lists,
by dint of turning the single ParamListInfo per estate into a nearly
read-only data structure that doesn't instantiate any per-variable data.
Instead, the paramFetch hook controls access to per-variable data and can
make the right decisions on the fly, replacing the cases that we used to
need multiple ParamListInfos for. This might perhaps have been a
performance loss on its own, but by using a paramCompile hook we can
bypass plpgsql_param_fetch entirely during normal query execution.
(It's now only called when, eg, we copy the ParamListInfo into a cursor
portal. copyParamList() or SerializeParamList() effectively instantiate
the virtual parameter array as a simple physical array without a
paramFetch hook, which is what we want in those cases.) This allows
reverting most of commit 6c82d8d1f, though I kept the cosmetic
code-consolidation aspects of that (eg the assign_simple_var function).
Performance testing shows this to be at worst a break-even change,
and it can provide wins ranging up to 20% in test cases involving
accesses to fields of "record" variables. The fact that values of
such variables can now be exposed to the planner might produce wins
in some situations, too, but I've not pursued that angle.
In passing, remove the "parent" pointer from the arguments to
ExecInitExprRec and related functions, instead storing that pointer in a
transient field in ExprState. The ParamListInfo pointer for a stand-alone
expression is handled the same way; we'd otherwise have had to add
yet another recursively-passed-down argument in expression compilation.
Discussion: https://postgr.es/m/32589.1513706441@sss.pgh.pa.us
I noticed that _SPI_execute_plan initially sets spierrcontext.arg = NULL,
and only fills it in some time later. If an error were to happen in
between, _SPI_error_callback would try to dereference the null pointer.
This is unlikely --- there's not much between those points except
push-snapshot calls --- but it's clearly not impossible. Tweak the
callback to do nothing if the pointer isn't set yet.
It's been like this for awhile, so back-patch to all supported branches.
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The logical decoding functions do BeginInternalSubTransaction and
RollbackAndReleaseCurrentSubTransaction to clean up after themselves.
It turns out that AtEOSubXact_SPI has an unrecognized assumption that
we always need to cancel the active SPI operation in the SPI context
that surrounds the subtransaction (if there is one). That's true
when the RollbackAndReleaseCurrentSubTransaction call is coming from
the SPI-using function itself, but not when it's happening inside
some unrelated function invoked by a SPI query. In practice the
affected callers are the various PLs.
To fix, record the current subtransaction ID when we begin a SPI
operation, and clean up only if that ID is the subtransaction being
canceled.
Also, remove AtEOSubXact_SPI's assertion that it must have cleaned
up the surrounding SPI context's active tuptable. That's proven
wrong by the same test case.
Also clarify (or, if you prefer, reinterpret) the calling conventions
for _SPI_begin_call and _SPI_end_call. The memory context cleanup
in the latter means that these have always had the flavor of a matched
resource-management pair, but they weren't documented that way before.
Per report from Ben Chobot.
Back-patch to 9.4 where logical decoding came in. In principle,
the SPI changes should go all the way back, since the problem dates
back to commit 7ec1c5a86. But given the lack of field complaints
it seems few people are using internal subtransactions in this way.
So I don't feel a need to take any risks in 9.2/9.3.
Discussion: https://postgr.es/m/73FBA179-C68C-4540-9473-71E865408B15@silentmedia.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Since it appears that v10 is going to move the goalposts by some amount
in terms of where you can and can't invoke set-returning functions,
arrange for the executor's "set-valued function called in context that
cannot accept a set" errors to include a syntax position if possible,
pointing to the specific SRF that can't be called where it's located.
The main bit of infrastructure needed for this is to make the query source
text accessible in the executor; but it turns out that commit 4c728f382
already did that. We just need a new function executor_errposition()
modeled on parser_errposition(), and we're ready to rock.
While experimenting with this, I noted that the error position wasn't
properly reported if it occurred in a plpgsql FOR-over-query loop,
which turned out to be because SPI_cursor_open_internal wasn't providing
an error context callback during PortalStart. Fix that.
There's a whole lot more that could be done with this infrastructure
now that it's there, but this is not the right time in the development
cycle for that sort of work. Hence, resist the temptation to plaster
executor_errposition() calls everywhere ... for the moment.
Discussion: https://postgr.es/m/5263.1492471571@sss.pgh.pa.us
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
Commit 59702716 added transition table support to PL/pgsql so that
SQL queries in trigger functions could access those transient
tables. In order to provide the same level of support for PL/perl,
PL/python and PL/tcl, refactor the relevant code into a new
function SPI_register_trigger_data. Call the new function in the
trigger handler of all four PLs, and document it as a public SPI
function so that authors of out-of-tree PLs can do the same.
Also get rid of a second QueryEnvironment object that was
maintained by PL/pgsql. That was previously used to deal with
cursors, but the same approach wasn't appropriate for PLs that are
less tangled up with core code. Instead, have SPI_cursor_open
install the connection's current QueryEnvironment, as already
happens for SPI_execute_plan.
While in the docs, remove the note that transition tables were only
supported in C and PL/pgSQL triggers, and correct some ommissions.
Thomas Munro with some work by Kevin Grittner (mostly docs)
On ProcessUtility document the parameter, to match others.
On CreateCachedPlan drop the queryEnv parameter. It was not
referenced within the function, and had been added on the
assumption that with some unknown future usage of QueryEnvironment
it might be useful to do something there. We have avoided other
"just in case" implementation of unused paramters, so drop it here.
Per gripe from Tom Lane
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
In SQL, the ability to use parallel query was previous contingent on
fcache->readonly_func, which is only set for non-volatile functions;
but the volatility of a function has no bearing on whether queries
inside it can use parallelism. Remove that condition.
SPI_execute and SPI_execute_with_args always run the plan just once,
though not necessarily to completion. Given the changes in commit
691b8d5928, it's sensible to pass
CURSOR_OPT_PARALLEL_OK here, so do that. This improves access to
parallelism for any caller that uses these functions to execute
queries. Such callers include plperl, plpython, pltcl, and plpgsql,
though it's not the case that they all use these functions
exclusively.
In plpgsql, allow parallel query for plain SELECT queries (as
opposed to PERFORM, which already worked) and for plain expressions
(which probably won't go through the executor at all, because they
will likely be simple expressions, but if they do then this helps).
Rafia Sabih and Robert Haas, reviewed by Dilip Kumar and Amit Kapila
Discussion: http://postgr.es/m/CAOGQiiMfJ+4SQwgG=6CVHWoisiU0+7jtXSuiyXBM3y=A=eJzmg@mail.gmail.com
Previously, it was unsafe to execute a plan in parallel if
ExecutorRun() might be called with a non-zero row count. However,
it's quite easy to fix things up so that we can support that case,
provided that it is known that we will never call ExecutorRun() a
second time for the same QueryDesc. Add infrastructure to signal
this, and cross-checks to make sure that a caller who claims this is
true doesn't later reneg.
While that pattern never happens with queries received directly from a
client -- there's no way to know whether multiple Execute messages
will be sent unless the first one requests all the rows -- it's pretty
common for queries originating from procedural languages, which often
limit the result to a single tuple or to a user-specified number of
tuples.
This commit doesn't actually enable parallelism in any additional
cases, because currently none of the places that would be able to
benefit from this infrastructure pass CURSOR_OPT_PARALLEL_OK in the
first place, but it makes it much more palatable to pass
CURSOR_OPT_PARALLEL_OK in places where we currently don't, because it
eliminates some cases where we'd end up having to run the parallel
plan serially.
Patch by me, based on some ideas from Rafia Sabih and corrected by
Rafia Sabih based on feedback from Dilip Kumar and myself.
Discussion: http://postgr.es/m/CA+TgmobXEhvHbJtWDuPZM9bVSLiTj-kShxQJ2uM5GPDze9fRYA@mail.gmail.com
When I wrote commit ab1f0c822, I really missed the castNode() macro that
Peter E. had proposed shortly before. This back-fills the uses I would
have put it to. It's probably not all that significant, but there are
more assertions here than there were before, and conceivably they will
help catch any bugs associated with those representation changes.
I left behind a number of usages like "(Query *) copyObject(query_var)".
Those could have been converted as well, but Peter has proposed another
notational improvement that would handle copyObject cases automatically,
so I let that be for now.
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
The idea behind SPI_push was to allow transitioning back into an
"unconnected" state when a SPI-using procedure calls unrelated code that
might or might not invoke SPI. That sounds good, but in practice the only
thing it does for us is to catch cases where a called SPI-using function
forgets to call SPI_connect --- which is a highly improbable failure mode,
since it would be exposed immediately by direct testing of said function.
As against that, we've had multiple bugs induced by forgetting to call
SPI_push/SPI_pop around code that might invoke SPI-using functions; these
are much harder to catch and indeed have gone undetected for years in some
cases. And we've had to band-aid around some problems of this ilk by
introducing conditional push/pop pairs in some places, which really kind
of defeats the purpose altogether; if we can't draw bright lines between
connected and unconnected code, what's the point?
Hence, get rid of SPI_push[_conditional], SPI_pop[_conditional], and the
underlying state variable _SPI_curid. It turns out SPI_restore_connection
can go away too, which is a nice side benefit since it was never more than
a kluge. Provide no-op macros for the deleted functions so as to avoid an
API break for external modules.
A side effect of this removal is that SPI_palloc and allied functions no
longer permit being called when unconnected; they'll throw an error
instead. The apparent usefulness of the previous behavior was a mirage
as well, because it was depended on by only a few places (which I fixed in
preceding commits), and it posed a risk of allocations being unexpectedly
long-lived if someone forgot a SPI_push call.
Discussion: <20808.1478481403@sss.pgh.pa.us>
There's basically no scenario where it's sensible for this to match
dropped columns, so put a test for dropped-ness into SPI_fnumber()
itself, and excise the test from the small number of callers that
were paying attention to the case. (Most weren't :-(.)
In passing, normalize tests at call sites: always reject attnum <= 0
if we're disallowing system columns. Previously there was a mixture
of "< 0" and "<= 0" tests. This makes no practical difference since
SPI_fnumber() never returns 0, but I'm feeling pedantic today.
Also, in the places that are actually live user-facing code and not
legacy cruft, distinguish "column not found" from "can't handle
system column".
Per discussion with Jim Nasby; thi supersedes his original patch
that just changed the behavior at one call site.
Discussion: <b2de8258-c4c0-1cb8-7b97-e8538e5c975c@BlueTreble.com>
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
Commit 874fe3aea changed the command tag returned for CREATE MATVIEW/CREATE
TABLE AS ... WITH NO DATA, but missed that there was code in spi.c that
expected the command tag to always be "SELECT". Fortunately, the
consequence was only an Assert failure, so this oversight should have no
impact in production builds.
Since this code path was evidently un-exercised, add a regression test.
Per report from Shivam Saxena. Back-patch to 9.3, like the previous commit.
Michael Paquier
Report: <97218716-480B-4527-B5CD-D08D798A0C7B@dresources.com>
If a Gather node has read as many tuples as it needs (for example, due
to Limit) it may detach the queue connecting it to the worker before
reading all of the worker's tuples. Rather than let the worker
continue to generate and send all of the results, have it stop after
sending the next tuple.
More could be done here to stop the worker even quicker, but this is
about as well as we can hope to do for 9.6.
This is in response to a problem report from Andreas Seltenreich.
Commit 44339b892a should be actually be
sufficient to fix that example even without this change, but it seems
better to do this, too, since we might otherwise waste quite a large
amount of effort in one or more workers.
Discussion: CAA4eK1KOKGqmz9bGu+Z42qhRwMbm4R5rfnqsLCNqFs9j14jzEA@mail.gmail.com
Amit Kapila
When IF NOT EXISTS was added to CREATE TABLE AS, this logic didn't get
the memo, possibly resulting in an Assert failure. It looks like there
would have been no ill effects in a non-Assert build, though. Back-patch
to 9.5 where the IF NOT EXISTS option was added.
Stas Kelvich
Commit 23a27b039d widened the rows-stored counters to uint64, but
that's academic unless we allow the tuple pointer array to exceed 1GB.
(It might be a good idea to provide some other limit on how much storage
a SPITupleTable can eat. On the other hand, there are plenty of other
ways to drive a backend into swap hell.)
Dagfinn Ilmari Mannsåker
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
Commit d1b7c1ffe7 introduced a mechanism
for serializing a ParamListInfo structure to be passed to a parallel
worker. However, this mechanism failed to handle external expanded
values, as pointed out by Noah Misch. Repair.
Moreover, plpgsql_param_fetch requires adjustment because the
serialization mechanism needs it to skip evaluating unused parameters
just as we would do when it is called from copyParamList, but params
== estate->paramLI in that case. To fix, make the bms_is_member test
in that function unconditional.
Finally, have setup_param_list set a new ParamListInfo field,
paramMask, to the parameters actually used in the expression, so that
we don't try to fetch those that are not needed when serializing a
parameter list. This isn't necessary for correctness, but it makes
the performance of the parallel executor code comparable to what we
do for cases involving cursors.
Design suggestions and extensive review by Noah Misch. Patch by me.
For no obvious reason, spi_printtup() was coded to enlarge the tuple
pointer table by just 256 slots at a time, rather than doubling the size at
each reallocation, as is our usual habit. For very large SPI results, this
makes for O(N^2) time spent in repalloc(), which of course soon comes to
dominate the runtime. Use the standard doubling approach instead.
This is a longstanding performance bug, so back-patch to all active
branches.
Neil Conway
This patch introduces the ability for complex datatypes to have an
in-memory representation that is different from their on-disk format.
On-disk formats are typically optimized for minimal size, and in any case
they can't contain pointers, so they are often not well-suited for
computation. Now a datatype can invent an "expanded" in-memory format
that is better suited for its operations, and then pass that around among
the C functions that operate on the datatype. There are also provisions
(rudimentary as yet) to allow an expanded object to be modified in-place
under suitable conditions, so that operations like assignment to an element
of an array need not involve copying the entire array.
The initial application for this feature is arrays, but it is not hard
to foresee using it for other container types like JSON, XML and hstore.
I have hopes that it will be useful to PostGIS as well.
In this initial implementation, a few heuristics have been hard-wired
into plpgsql to improve performance for arrays that are stored in
plpgsql variables. We would like to generalize those hacks so that
other datatypes can obtain similar improvements, but figuring out some
appropriate APIs is left as a task for future work. (The heuristics
themselves are probably not optimal yet, either, as they sometimes
force expansion of arrays that would be better left alone.)
Preliminary performance testing shows impressive speed gains for plpgsql
functions that do element-by-element access or update of large arrays.
There are other cases that get a little slower, as a result of added array
format conversions; but we can hope to improve anything that's annoyingly
bad. In any case most applications should see a net win.
Tom Lane, reviewed by Andres Freund
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
This only happens if a client issues a Parse message with an empty query
string, which is a bit odd; but since it is explicitly called out as legal
by our FE/BE protocol spec, we'd probably better continue to allow it.
Fix by adding tests everywhere that the raw_parse_tree field is passed to
functions that don't or shouldn't accept NULL. Also make it clear in the
relevant comments that NULL is an expected case.
This reverts commits a73c9dbab0 and
2e9650cbcf, which fixed specific crash
symptoms by hacking things at what now seems to be the wrong end, ie the
callee functions. Making the callees allow NULL is superficially more
robust, but it's not always true that there is a defensible thing for the
callee to do in such cases. The caller has more context and is better
able to decide what the empty-query case ought to do.
Per followup discussion of bug #11335. Back-patch to 9.2. The code
before that is sufficiently different that it would require development
of a separate patch, which doesn't seem worthwhile for what is believed
to be an essentially cosmetic change.
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Historically, printtup() has assumed that it could prevent memory leakage
by pfree'ing the string result of each output function and manually
managing detoasting of toasted values. This amounts to assuming that
datatype output functions never leak any memory internally; an assumption
we've already decided to be bogus elsewhere, for example in COPY OUT.
range_out in particular is known to leak multiple kilobytes per call, as
noted in bug #8573 from Godfried Vanluffelen. While we could go in and fix
that leak, it wouldn't be very notationally convenient, and in any case
there have been and undoubtedly will again be other leaks in other output
functions. So what seems like the best solution is to run the output
functions in a temporary memory context that can be reset after each row,
as we're doing in COPY OUT. Some quick experimentation suggests this is
actually a tad faster than the retail pfree's anyway.
This patch fixes all the variants of printtup, except for debugtup()
which is used in standalone mode. It doesn't seem worth worrying
about query-lifespan leaks in standalone mode, and fixing that case
would be a bit tedious since debugtup() doesn't currently have any
startup or shutdown functions.
While at it, remove manual detoast management from several other
output-function call sites that had copied it from printtup(). This
doesn't make a lot of difference right now, but in view of recent
discussions about supporting "non-flattened" Datums, we're going to
want that code gone eventually anyway.
Back-patch to 9.2 where range_out was introduced. We might eventually
decide to back-patch this further, but in the absence of known major
leaks in older output functions, I'll refrain for now.
plpgsql often just remembers SPI-result tuple tables in local variables,
and has no mechanism for freeing them if an ereport(ERROR) causes an escape
out of the execution function whose local variable it is. In the original
coding, that wasn't a problem because the tuple table would be cleaned up
when the function's SPI context went away during transaction abort.
However, once plpgsql grew the ability to trap exceptions, repeated
trapping of errors within a function could result in significant
intra-function-call memory leakage, as illustrated in bug #8279 from
Chad Wagner.
We could fix this locally in plpgsql with a bunch of PG_TRY/PG_CATCH
coding, but that would be tedious, probably slow, and prone to bugs of
omission; moreover it would do nothing for similar risks elsewhere.
What seems like a better plan is to make SPI itself responsible for
freeing tuple tables at subtransaction abort. This patch attacks the
problem that way, keeping a list of live tuple tables within each SPI
function context. Currently, such freeing is automatic for tuple tables
made within the failed subtransaction. We might later add a SPI call to
mark a tuple table as not to be freed this way, allowing callers to opt
out; but until someone exhibits a clear use-case for such behavior, it
doesn't seem worth bothering.
A very useful side-effect of this change is that SPI_freetuptable() can
now defend itself against bad calls, such as duplicate free requests;
this should make things more robust in many places. (In particular,
this reduces the risks involved if a third-party extension contains
now-redundant SPI_freetuptable() calls in error cleanup code.)
Even though the leakage problem is of long standing, it seems imprudent
to back-patch this into stable branches, since it does represent an API
semantics change for SPI users. We'll patch this in 9.3, but live with
the leakage in older branches.
Choose a saner ordering of parameters (adding a new input param after
the output params seemed a bit random), update the function's header
comment to match reality (cmon folks, is this really that hard?),
get rid of useless and sloppily-defined distinction between
PROCESS_UTILITY_SUBCOMMAND and PROCESS_UTILITY_GENERATED.
This was due to incomplete implementation of rowcount reporting
for RMV, which was due to initial waffling on whether it should
be provided. It seems unlikely to be a useful or universally
available number as more sophisticated techniques for maintaining
matviews are added, so remove the partial support rather than
completing it.
Per report of Jeevan Chalke, but with a different fix
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
exec_simple_check_plan and exec_eval_simple_expr attempted to call
GetCachedPlan directly. This meant that if an error was thrown during
planning, the resulting context traceback would not include the line
normally contributed by _SPI_error_callback. This is already inconsistent,
but just to be really odd, a re-execution of the very same expression
*would* show the additional context line, because we'd already have cached
the plan and marked the expression as non-simple.
The problem is easy to demonstrate in 9.2 and HEAD because planning of a
cached plan doesn't occur at all until GetCachedPlan is done. In earlier
versions, it could only be an issue if initial planning had succeeded, then
a replan was forced (already somewhat improbable for a simple expression),
and the replan attempt failed. Since the issue is mainly cosmetic in older
branches anyway, it doesn't seem worth the risk of trying to fix it there.
It is worth fixing in 9.2 since the instability of the context printout can
affect the results of GET STACKED DIAGNOSTICS, as per a recent discussion
on pgsql-novice.
To fix, introduce a SPI function that wraps GetCachedPlan while installing
the correct callback function. Use this instead of calling GetCachedPlan
directly from plpgsql.
Also introduce a wrapper function for extracting a SPI plan's
CachedPlanSource list. This lets us stop including spi_priv.h in
pl_exec.c, which was never a very good idea from a modularity standpoint.
In passing, fix a similar inconsistency that could occur in SPI_cursor_open,
which was also calling GetCachedPlan without setting up a context callback.
SPI_execute() and related functions create a CachedPlan, execute it once,
and immediately discard it, so that the functionality offered by
plancache.c is of no value in this code path. And performance measurements
show that the extra data copying and invalidation checking done by
plancache.c slows down simple queries by 10% or more compared to 9.1.
However, enough of the SPI code is shared with functions that do need plan
caching that it seems impractical to bypass plancache.c altogether.
Instead, let's invent a variant version of cached plans that preserves
99% of the API but doesn't offer any of the actual functionality, nor the
overhead. This puts SPI_execute() performance back on par, or maybe even
slightly better, than it was before. This change should resolve recent
complaints of performance degradation from Dong Ye, Pavel Stehule, and
others.
By avoiding data copying, this change also reduces the amount of memory
needed to execute many-statement SPI_execute() strings, as for instance in
a recent complaint from Tomas Vondra.
An additional benefit of this change is that multi-statement SPI_execute()
query strings are now processed fully serially, that is we complete
execution of earlier statements before running parse analysis and planning
on following ones. This eliminates a long-standing POLA violation, in that
DDL that affects the behavior of a later statement will now behave as
expected.
Back-patch to 9.2, since this was a performance regression compared to 9.1.
(In 9.2, place the added struct fields so as to avoid changing the offsets
of existing fields.)
Heikki Linnakangas and Tom Lane
This reverts commit d573e239f0, "Take fewer
snapshots". While that seemed like a good idea at the time, it caused
execution to use a snapshot that had been acquired before locking any of
the tables mentioned in the query. This created user-visible anomalies
that were not present in any prior release of Postgres, as reported by
Tomas Vondra. While this whole area could do with a redesign (since there
are related cases that have anomalies anyway), it doesn't seem likely that
any future patch would be reasonably back-patchable; and we don't want 9.2
to exhibit a behavior that's subtly unlike either past or future releases.
Hence, revert to prior code while we rethink the problem.
You can now get the number of rows processed by a COPY statement in a
PL/pgSQL function with "GET DIAGNOSTICS x = ROW_COUNT".
Pavel Stehule, reviewed by Amit Kapila, with some editing by me.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
The old coding was using a regular snapshot, referenced elsewhere, that was
subject to having its command counter updated. Fix by creating a private copy
of the snapshot exclusively for the cursor.
Backpatch to 8.4, which is when the bug was introduced during the snapshot
management rewrite.
case that the command is rewritten into another type of command. The old
behavior to return the command tag of the last executed command was
pretty surprising. In PL/pgSQL, for example, it meant that if a command
was rewritten to a utility statement, FOUND wasn't set at all.
OutputFunctionCall, and friends. This allows SPI-using functions to invoke
datatype I/O without concern for the possibility that a SPI-using function
will be called (which could be either the I/O function itself, or a function
used in a domain check constraint). It's a tad ugly, but not nearly as ugly
as what'd be needed to make this work via retail insertion of push/pop
operations in all the PLs.
This reverts my patch of 2007-01-30 that inserted some retail SPI_push/pop
calls into plpgsql; that approach only fixed plpgsql, and not any other PLs.
But the other PLs have the issue too, as illustrated by a recent gripe from
Christian Schröder.
Back-patch to 8.2, which is as far back as this solution will work. It's
also as far back as we need to worry about the domain-constraint case, since
earlier versions did not attempt to check domain constraints within datatype
input. I'm not aware of any old I/O functions that use SPI themselves, so
this should be sufficient for a back-patch.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
practically free given prior 8.4 changes in plancache and portal management,
and it makes it a lot easier for ExecutorStart/Run/End hooks to get at the
query text. Extracted from Itagaki Takahiro's pg_stat_statements patch,
with minor editorialization.
that a Portal is a useful and sufficient additional argument for
CreateDestReceiver --- it just isn't, in most cases. Instead formalize
the approach of passing any needed parameters to the receiver separately.
One unexpected benefit of this change is that we can declare typedef Portal
in a less surprising location.
This patch is just code rearrangement and doesn't change any functionality.
I'll tackle the HOLD-cursor-vs-toast problem in a follow-on patch.
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
according to the TupleDesc's natts, not the number of physical columns in the
tuple. The previous coding would do the wrong thing in cases where natts is
different from the tuple's column count: either incorrectly report error when
it should just treat the column as null, or actually crash due to indexing off
the end of the TupleDesc's attribute array. (The second case is probably not
possible in modern PG versions, due to more careful handling of inheritance
cases than we once had. But it's still a clear lack of robustness here.)
The incorrect error indication is ignored by all callers within the core PG
distribution, so this bug has no symptoms visible within the core code, but
it might well be an issue for add-on packages. So patch all the way back.
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
a portal are never NULL, but reliably provide the source text of the query.
It turns out that there was only one place that was really taking a short-cut,
which was the 'EXECUTE' utility statement. That doesn't seem like a
sufficiently critical performance hotspot to justify not offering a guarantee
of validity of the portal source text. Fix it to copy the source text over
from the cached plan. Add Asserts in the places that set up cached plans and
portals to reject null source strings, and simplify a bunch of places that
formerly needed to guard against nulls.
There may be a few places that cons up statements for execution without
having any source text at all; I found one such in ConvertTriggerToFK().
It seems sufficient to inject a phony source string in such a case,
for instance
ProcessUtility((Node *) atstmt,
"(generated ALTER TABLE ADD FOREIGN KEY command)",
NULL, false, None_Receiver, NULL);
We should take a second look at the usage of debug_query_string,
particularly the recently added current_query() SQL function.
ITAGAKI Takahiro and Tom Lane
the PARAM_FLAG_CONST flag on the parameters that are passed into the portal,
while the former's behavior is unchanged. This should only affect the case
where the portal is executing an EXPLAIN; it will cause the generated plan to
look more like what would be generated if the portal were actually executing
the command being explained. Per gripe from Pavel.
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
responsible for copying the query string into the new Portal. Such copying
is unnecessary in the common code path through exec_simple_query, and in
this case it can be enormously expensive because the string might contain
a large number of individual commands; we were copying the entire, long
string for each command, resulting in O(N^2) behavior for N commands.
(This is the cause of bug #4079.) A second problem with it is that
PortalDefineQuery really can't risk error, because if it elog's before
having set up the Portal, we will leak the plancache refcount that the
caller is trying to hand off to the portal. So go back to the design in
which the caller is responsible for making sure everything is copied into
the portal if necessary.
that is commands that have out-of-line parameters but the plan is prepared
assuming that the parameter values are constants. This is needed for the
plpgsql EXECUTE USING patch, but will probably have use elsewhere.
This commit includes the SPI functions and documentation, but no callers
nor regression tests. The upcoming EXECUTE USING patch will provide
regression-test coverage. I thought committing this separately made
sense since it's logically a distinct feature.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
doing anything interesting, such as calling RevalidateCachedPlan(). The
necessity of this is demonstrated by an example from Willem Buitendyk:
during a replan, the planner might try to evaluate SPI-using functions,
and so we'd better be in a clean SPI context.
A small downside of this fix is that these two functions will now fail
outright if called when not inside a SPI-using procedure (ie, a
SPI_connect/SPI_finish pair). The documentation never promised or suggested
that that would work, though; and they are normally used in concert with
other functions, mainly SPI_prepare, that always have failed in such a case.
So the odds of breaking something seem pretty low.
In passing, make SPI_is_cursor_plan's error handling convention clearer,
and fix documentation's erroneous claim that SPI_cursor_open would
return NULL on error.
Before 8.3 these functions could not invoke replanning, so there is probably
no need for back-patching.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
plan before the effects of DDL executed in an immediately prior SPI operation
had been absorbed. Per report from Chris Wood.
This patch has an unpleasant side effect of causing the number of
CommandCounterIncrement()s done by a typical plpgsql function to
approximately double. Amelioration of the consequences of that
will be undertaken in a separate patch.
in corner cases such as re-fetching a just-deleted row. We may be able to
relax this someday, but let's find out how many people really care before
we invest a lot of work in it. Per report from Heikki and subsequent
discussion.
While in the neighborhood, make the combination of INSENSITIVE and FOR UPDATE
throw an error, since they are semantically incompatible. (Up to now we've
accepted but just ignored the INSENSITIVE option of DECLARE CURSOR.)
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
Bruce Momjian
Tom Lane
Peter Eisentraut
Andres Freund
Kevin Grittner
Robert Haas
Noah Misch
Heikki Linnakangas
Alvaro Herrera
Magnus Hagander