Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
Most parts of the parser can expect that the stack overflow check
in transformExprRecurse() will trigger before things get desperate.
However, transformFromClauseItem() can recurse directly to self
without having analyzed any expressions, so it's possible to drive
it to a stack-overrun crash. Add a check to prevent that.
Per bug #17583 from Egor Chindyaskin. Back-patch to all supported
branches.
Richard Guo
Discussion: https://postgr.es/m/17583-33be55b9f981f75c@postgresql.org
This allows aliases for sub-SELECTs and VALUES clauses in the FROM
clause to be omitted.
This is an extension of the SQL standard, supported by some other
database systems, and so eases the transition from such systems, as
well as removing the minor inconvenience caused by requiring these
aliases.
Patch by me, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUCGCf82=hxd9N5n6xGHPyYpQnxW8HneeH+uP7yNALkWA@mail.gmail.com
9d9c02ccd added code to allow the executor to take shortcuts when quals
on monotonic window functions guaranteed that once the qual became false
it could never become true again. When possible, baserestrictinfo quals
are converted to become these quals, which we call run conditions.
Unfortunately, in 9d9c02ccd, I forgot to update
remove_unused_subquery_outputs to teach it about these run conditions.
This could cause a WindowFunc column which was unused in the target list
but referenced by an upper-level WHERE clause to be removed from the
subquery when the qual in the WHERE clause was converted into a window run
condition. Because of this, the entire WindowClause would be removed from
the query resulting in additional rows making it into the resultset when
they should have been filtered out by the WHERE clause.
Here we fix this by recording which target list items in the subquery have
run conditions. That gets passed along to remove_unused_subquery_outputs
to tell it not to remove these items from the target list.
Bug: #17495
Reported-by: Jeremy Evans
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/17495-7ffe2fa0b261b9fa@postgresql.org
We weren't checking the length of the column list in the alias clause of
an XMLTABLE or JSON_TABLE function (a "tablefunc" RTE), and it was
possible to make the server crash by passing an overly long one. Fix it
by throwing an error in that case, like the other places that deal with
alias lists.
In passing, modify the equivalent test used for join RTEs to look like
the other ones, which was different for no apparent reason.
This bug came in when XMLTABLE was born in version 10; backpatch to all
stable versions.
Reported-by: Wang Ke <krking@zju.edu.cn>
Discussion: https://postgr.es/m/17480-1c9d73565bb28e90@postgresql.org
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Other equalfuncs.c checks on CoercionForm fields use
COMPARE_COERCIONFORM_FIELD (which makes them no-ops),
but commit 40c24bfef neglected to make _equalFuncCall
do likewise. Fix that.
This is only strictly correct if FuncCall.funcformat has
no semantic effect, instead just determining ruleutils.c
display formatting. 40c24bfef added a couple of checks
in parse analysis that could break that rule; but on closer
inspection, they're redundant, so just take them out again.
Per report from Noah Misch.
Discussion: https://postgr.es/m/20210606063331.GC297923@rfd.leadboat.com
Previously you could only use unqualified variable names here.
While that's not a functional deficiency, since only the target
table can be referenced, it's a surprising inconsistency with the
rules for partial-index predicates, on which this syntax is
supposedly modeled.
The fix for that is no harder than passing addToRelNameSpace = true
to addNSItemToQuery. However, it's really pretty bogus for
transformOnConflictArbiter and transformOnConflictClause to be
messing with the namespace item for the target table at all.
It's not theirs to manage, it results in duplicative creations of
namespace items, and transformOnConflictClause wasn't even doing
it quite correctly (that coding resulted in two nsitems for the
target table, since it hadn't cleaned out the existing one).
Hence, make transformInsertStmt responsible for setting up the
target nsitem once for both these clauses and RETURNING.
Also, arrange for ON CONFLICT ... UPDATE's "excluded" pseudo-relation
to be added to the rangetable before we run transformOnConflictArbiter.
This produces a more helpful HINT if someone writes "excluded.col"
in the arbiter expression.
Per bug #16958 from Lukas Eder. Although I agree this is a bug,
the consequences are hardly severe, so no back-patch.
Discussion: https://postgr.es/m/16958-963f638020de271c@postgresql.org
This allows something like
SELECT ... FROM t1 JOIN t2 USING (a, b, c) AS x
where x has the columns a, b, c and unlike a regular alias it does not
hide the range variables of the tables being joined t1 and t2.
Per SQL:2016 feature F404 "Range variable for common column names".
Reviewed-by: Vik Fearing <vik.fearing@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/454638cf-d563-ab76-a585-2564428062af@2ndquadrant.com
ParseNamespaceItem had a wired-in assumption that p_rte->eref
describes the table and column aliases exposed by the nsitem. This
relaxes this by creating a separate p_names field in an nsitem. This
is mainly preparation for a patch for JOIN USING aliases, but it saves
one indirection in common code paths, so it's possibly a win on its
own.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/785329.1616455091@sss.pgh.pa.us
In the wake of c028faf2a, this is no longer needed. I left it
out of that patch since the API change would be undesirable in
a released branch; but there's no reason not to do it in HEAD.
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
This accompanies select_common_type() and select_common_collation().
Typmods were previously combined using hand-coded logic in several
places. The logic in select_common_typmod() isn't very exciting, but
it makes the code more compact and readable in a few locations, and in
the future we can perhaps do more complicated things if desired.
As a small enhancement, the type unification of the direct and
aggregate arguments of hypothetical-set aggregates now unifies the
typmod as well using this new function, instead of just dropping it.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/97df3af9-8b5e-fb7f-a029-3eb7e80d7af9@2ndquadrant.com
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
The core idea of this patch is to make the parser generate join alias
Vars (that is, ones with varno pointing to a JOIN RTE) only when the
alias Var is actually different from any raw join input, that is a type
coercion and/or COALESCE is necessary to generate the join output value.
Otherwise just generate varno/varattno pointing to the relevant join
input column.
In effect, this means that the planner's flatten_join_alias_vars()
transformation is already done in the parser, for all cases except
(a) columns that are merged by JOIN USING and are transformed in the
process, and (b) whole-row join Vars. In principle that would allow
us to skip doing flatten_join_alias_vars() in many more queries than
we do now, but we don't have quite enough infrastructure to know that
we can do so --- in particular there's no cheap way to know whether
there are any whole-row join Vars. I'm not sure if it's worth the
trouble to add a Query-level flag for that, and in any case it seems
like fit material for a separate patch. But even without skipping the
work entirely, this should make flatten_join_alias_vars() faster,
particularly where there are nested joins that it previously had to
flatten recursively.
An essential part of this change is to replace Var nodes'
varnoold/varoattno fields with varnosyn/varattnosyn, which have
considerably more tightly-defined meanings than the old fields: when
they differ from varno/varattno, they identify the Var's position in
an aliased JOIN RTE, and the join alias is what ruleutils.c should
print for the Var. This is necessary because the varno change
destroyed ruleutils.c's ability to find the JOIN RTE from the Var's
varno.
Another way in which this change broke ruleutils.c is that it's no
longer feasible to determine, from a JOIN RTE's joinaliasvars list,
which join columns correspond to which columns of the join's immediate
input relations. (If those are sub-joins, the joinaliasvars entries
may point to columns of their base relations, not the sub-joins.)
But that was a horrid mess requiring a lot of fragile assumptions
already, so let's just bite the bullet and add some more JOIN RTE
fields to make it more straightforward to figure that out. I added
two integer-List fields containing the relevant column numbers from
the left and right input rels, plus a count of how many merged columns
there are.
This patch depends on the ParseNamespaceColumn infrastructure that
I added in commit 5815696bc. The biggest bit of code change is
restructuring transformFromClauseItem's handling of JOINs so that
the ParseNamespaceColumn data is propagated upward correctly.
Other than that and the ruleutils fixes, everything pretty much
just works, though some processing is now inessential. I grabbed
two pieces of low-hanging fruit in that line:
1. In find_expr_references, we don't need to recurse into join alias
Vars anymore. There aren't any except for references to merged USING
columns, which are more properly handled when we scan the join's RTE.
This change actually fixes an edge-case issue: we will now record a
dependency on any type-coercion function present in a USING column's
joinaliasvar, even if that join column has no references in the query
text. The odds of the missing dependency causing a problem seem quite
small: you'd have to posit somebody dropping an implicit cast between
two data types, without removing the types themselves, and then having
a stored rule containing a whole-row Var for a join whose USING merge
depends on that cast. So I don't feel a great need to change this in
the back branches. But in theory this way is more correct.
2. markRTEForSelectPriv and markTargetListOrigin don't need to recurse
into join alias Vars either, because the cases they care about don't
apply to alias Vars for USING columns that are semantically distinct
from the underlying columns. This removes the only case in which
markVarForSelectPriv could be called with NULL for the RTE, so adjust
the comments to describe that hack as being strictly internal to
markRTEForSelectPriv.
catversion bump required due to changes in stored rules.
Discussion: https://postgr.es/m/7115.1577986646@sss.pgh.pa.us
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
Instead of passing around a pointer to the RangeTblEntry that
provides the desired column, pass a pointer to the associated
ParseNamespaceItem. The RTE is trivially reachable from the nsitem,
and having the ParseNamespaceItem allows access to additional
information. As proof of concept for that, add the rangetable index
to ParseNamespaceItem, and use that to get rid of RTERangeTablePosn
searches.
(I have in mind to teach the parser to generate some different
representation for Vars that are nullable by outer joins, and
keeping the necessary information in ParseNamespaceItems seems
like a reasonable approach to that. But whether that ever
happens or not, this seems like good cleanup.)
Also refactor the code around scanRTEForColumn so that the
"fuzzy match" stuff does not leak out of parse_relation.c.
Discussion: https://postgr.es/m/26144.1576858373@sss.pgh.pa.us
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
The "name" comparison operators now all support collations, making them
functionally equivalent to "text" comparisons, except for the different
physical representation of the datatype. They do, in fact, mostly share
the varstr_cmp and varstr_sortsupport infrastructure, which has been
slightly enlarged to handle the case.
To avoid changes in the default behavior of the datatype, set name's
typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that
by default comparisons to a name value will continue to use strcmp
semantics. (This would have been the case for system catalog columns
anyway, because of commit 6b0faf723, but doing this makes it true for
user-created name columns as well. In particular, this avoids
locale-dependent changes in our regression test results.)
In consequence, tweak a couple of places that made assumptions about
collatable base types always having typcollation DEFAULT_COLLATION_OID.
I have not, however, attempted to relax the restriction that user-
defined collatable types must have that. Hence, "name" doesn't
behave quite like a user-defined type; it acts more like a domain
with COLLATE "C". (Conceivably, if we ever get rid of the need for
catalog name columns to be fixed-length, "name" could actually become
such a domain over text. But that'd be a pretty massive undertaking,
and I'm not volunteering.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Add RangeTblEntry.rellockmode, which records the appropriate lock mode for
each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock,
or RowExclusiveLock depending on the RTE's role in the query).
This patch creates the field and makes all creators of RTE nodes fill it
in reasonably, but for the moment nothing much is done with it. The plan
is to replace assorted post-parser logic that re-determines the right
lockmode to use with simple uses of rte->rellockmode. For now, just add
Asserts in each of those places that the rellockmode matches what they are
computing today. (In some cases the match isn't perfect, so the Asserts
are weaker than you might expect; but this seems OK, as per discussion.)
This passes check-world for me, but it seems worth pushing in this state
to see if the buildfarm finds any problems in cases I failed to test.
catversion bump due to change of stored rules.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
The original coding for XMLTABLE thought it could represent a default
namespace by a T_String Value node with a null string pointer. That's
not okay, though; in particular outfuncs.c/readfuncs.c are not on board
with such a representation, meaning you'll get a null pointer crash
if you try to store a view or rule containing this construct.
To fix, change the parsetree representation so that we have a NULL
list element, instead of a bogus Value node.
This isn't really a functional limitation since default XML namespaces
aren't yet implemented in the executor; you'd just get "DEFAULT
namespace is not supported" anyway. But crashes are not nice, so
back-patch to v10 where this syntax was added. Ordinarily we'd consider
a parsetree representation change to be un-backpatchable; but since
existing releases would crash on the way to storing such constructs,
there can't be any existing views/rules to be incompatible with.
Per report from Andrey Lepikhov.
Discussion: https://postgr.es/m/3690074f-abd2-56a9-144a-aa5545d7a291@postgrespro.ru
nodeWindowAgg.c failed to cope with the possibility that no ordering
columns are defined in the window frame for GROUPS mode or RANGE OFFSET
mode, leading to assertion failures or odd errors, as reported by Masahiko
Sawada and Lukas Eder. In RANGE OFFSET mode, an ordering column is really
required, so add an Assert about that. In GROUPS mode, the code would
work, except that the node initialization code wasn't in sync with the
execution code about when to set up tuplestore read pointers and spare
slots. Fix the latter for consistency's sake (even though I think the
changes described below make the out-of-sync cases unreachable for now).
Per SQL spec, a single ordering column is required for RANGE OFFSET mode,
and at least one ordering column is required for GROUPS mode. The parser
enforced the former but not the latter; add a check for that.
We were able to reach the no-ordering-column cases even with fully spec
compliant queries, though, because the planner would drop partitioning
and ordering columns from the generated plan if they were redundant with
earlier columns according to the redundant-pathkey logic, for instance
"PARTITION BY x ORDER BY y" in the presence of a "WHERE x=y" qual.
While in principle that's an optimization that could save some pointless
comparisons at runtime, it seems unlikely to be meaningful in the real
world. I think this behavior was not so much an intentional optimization
as a side-effect of an ancient decision to construct the plan node's
ordering-column info by reverse-engineering the PathKeys of the input
path. If we give up redundant-column removal then it takes very little
code to generate the plan node info directly from the WindowClause,
ensuring that we have the expected number of ordering columns in all
cases. (If anyone does complain about this, the planner could perhaps
be taught to remove redundant columns only when it's safe to do so,
ie *not* in RANGE OFFSET mode. But I doubt anyone ever will.)
With these changes, the WindowAggPath.winpathkeys field is not used for
anything anymore, so remove it.
The test cases added here are not actually very interesting given the
removal of the redundant-column-removal logic, but they would represent
important corner cases if anyone ever tries to put that back.
Tom Lane and Masahiko Sawada. Back-patch to v11 where RANGE OFFSET
and GROUPS modes were added.
Discussion: https://postgr.es/m/CAD21AoDrWqycq-w_+Bx1cjc+YUhZ11XTj9rfxNiNDojjBx8Fjw@mail.gmail.com
Discussion: https://postgr.es/m/153086788677.17476.8002640580496698831@wrigleys.postgresql.org
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Tom Lane
Bruce Momjian
Alvaro Herrera
David Rowley
Peter Geoghegan
Andrew Dunstan
Dean Rasheed
Peter Eisentraut
Amit Kapila
Andres Freund
Simon Riggs