Neither is actually initialized as an auxiliary process, so it does not really
make sense to reserve a PGPROC etc for them.
This keeps checker mode implemented by exiting partway through bootstrap
mode. That might be worth changing at some point, perhaps if we ever extend
checker mode to be a more general tool.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
After the preceding commits the auxprocess code is independent from
bootstrap.c - so a dedicated file seems less confusing.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
There practically was no shared code between the two, once all the ifs are
removed. And it was quite confusing that aux processes weren't actually
started by the call to AuxiliaryProcessMain() in main().
There's more to do, AuxiliaryProcessMain() should move out of bootstrap.c, and
BootstrapModeMain() shouldn't use/be part of AuxProcType.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
It is confusing that aux processes are started with --forkboot, given that
bootstrap mode cannot run below postmaster.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
Emit a LOG message when the postmaster stops because of a failure in
the startup process. There already is a similar message if we exit
for that reason during PM_STARTUP phase, so it seems inconsistent
that there was none if the startup process fails later on.
Also emit a LOG message when the postmaster stops after a crash
because restart_after_crash is disabled. This seems potentially
helpful in case DBAs (or developers) forget that that's set.
Also, it was the only remaining place where the postmaster would
do an abnormal exit without any comment as to why.
In passing, remove an unreachable call of ExitPostmaster(0).
Discussion: https://postgr.es/m/194914.1621641288@sss.pgh.pa.us
1) Previously there were both pgstat_send_wal() and pgstat_report_wal()
in order to send WAL activity to the stats collector. With the former being
used by wal writer, the latter by most other processes. They were a bit
redundant and so this commit merges them into pgstat_send_wal() to
simplify the code.
2) Previously WAL global statistics counters were calculated and then
compared with zero-filled buffer in order to determine whether any WAL
activity has happened since the last submission. These calculation and
comparison were not cheap. This was regularly exercised even in read-only
workloads. This commit fixes the issue by making some WAL activity
counters directly be checked to determine if there's WAL activity stats
to send.
3) Previously pgstat_report_stat() did not check if there's WAL activity
stats to send as part of the "Don't expend a clock check if nothing to do"
check at the top. It's probably rare to have pending WAL stats without
also passing one of the other conditions, but for safely this commit
changes pgstat_report_stats() so that it checks also some WAL activity
counters at the top.
This commit also adds the comments about the design of WAL stats.
Reported-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi, Andres Freund, Fujii Masao
Discussion: https://postgr.es/m/20210324232224.vrfiij2rxxwqqjjb@alap3.anarazel.de
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
ForgetBackgroundWorker lacked any memory barrier at all, while
BackgroundWorkerStateChange had one but unaccountably did
additional manipulation of the slot after the barrier. AFAICS,
the rule must be that the barrier is immediately before setting
or clearing slot->in_use.
It looks like back in 9.6 when ForgetBackgroundWorker was first
written, there might have been some case for not needing a
barrier there, but I'm not very convinced of that --- the fact
that the load of bgw_notify_pid is in the caller doesn't seem
to guarantee no memory ordering problem. So patch 9.6 too.
It's likely that this doesn't fix any observable bug on Intel
hardware, but machines with weaker memory ordering rules could
have problems here.
Discussion: https://postgr.es/m/4046084.1620244003@sss.pgh.pa.us
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Add a few words of comment to explain why SIGURG doesn't follow the
dummy_handler pattern used for SIGUSR2, since that might otherwise
appear to be a bug.
Discussion: https://postgr.es/m/4006115.1618577212%40sss.pgh.pa.us
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
When commit 0827e8af70 added auto-analyze support for partitioned
tables, it included code to obtain reltuples for the partitioned table
as a number of catalog accesses to read pg_class.reltuples for each
partition. That's not only very inefficient, but also problematic
because autovacuum doesn't hold any locks on any of those tables -- and
doesn't want to. Replace that code with a read of pg_class.reltuples
for the partitioned table, and make sure ANALYZE and TRUNCATE properly
maintain that value.
I found no code that would be affected by the change of relpages from
zero to non-zero for partitioned tables, and no other code that should
be maintaining it, but if there is, hopefully it'll be an easy fix.
Per buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/1823909.1617862590@sss.pgh.pa.us
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously, autovacuum would completely ignore partitioned tables, which
is not good regarding analyze -- failing to analyze those tables means
poor plans may be chosen. Make autovacuum aware of those tables by
propagating "changes since analyze" counts from the leaf partitions up
the partitioning hierarchy.
This also introduces necessary reloptions support for partitioned tables
(autovacuum_enabled, autovacuum_analyze_scale_factor,
autovacuum_analyze_threshold). It's unclear how best to document this
aspect.
Author: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAKkQ508_PwVgwJyBY=0Lmkz90j8CmWNPUxgHvCUwGhMrouz6UA@mail.gmail.com
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b92.
This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.
Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.
As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.
To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.
Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Previously when an archive recovery or a standby was starting and
reached the consistent recovery state but hot_standby was configured
to off, the error message when a client connectted was "the database
system is starting up", which was needless confusing and not really
all that accurate either.
This commit improves the connection denied error message during
recovery, as follows, so that the users immediately know that their
servers are configured to deny those connections.
- If hot_standby is disabled, the error message "the database system
is not accepting connections" and the detail message "Hot standby
mode is disabled." are output when clients connect while an archive
recovery or a standby is running.
- If hot_standby is enabled, the error message "the database system
is not yet accepting connections" and the detail message
"Consistent recovery state has not been yet reached." are output
when clients connect until the consistent recovery state is reached
and postmaster starts accepting read only connections.
This commit doesn't change the connection denied error message of
"the database system is starting up" during normal server startup and
crash recovery. Because it's still suitable for those situations.
Author: James Coleman
Reviewed-by: Alvaro Herrera, Andres Freund, David Zhang, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAAaqYe8h5ES_B=F_zDT+Nj9XU7YEwNhKhHA2RE4CFhAQ93hfig@mail.gmail.com
Common recommendations are that the checkpoint should be spread out as
much as possible, provided we avoid having it take too long. This
change updates the default to 0.9 (from 0.5) to match that
recommendation.
There was some debate about possibly removing the option entirely but it
seems there may be some corner-cases where having it set much lower to
try to force the checkpoint to be as fast as possible could result in
fewer periods of time of reduced performance due to kernel flushing.
General agreement is that the "spread more" is the preferred approach
though and those who need to tune away from that value are much less
common.
Reviewed-By: Michael Paquier, Peter Eisentraut, Tom Lane, David Steele,
Nathan Bossart
Discussion: https://postgr.es/m/20201207175329.GM16415%40tamriel.snowman.net
Commit de829ddf23 added wait event WalrcvExit. But its name is not
consistent with other wait events like WalReceiverMain or
WalReceiverWaitStart, etc. So this commit renames WalrcvExit to
WalReceiverExit.
Author: Fujii Masao
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/cced9995-8fa2-7b22-9d91-3f22a2b8c23c@oss.nttdata.com
Previously the type of this wait event was Client. But while this
wait event is being reported, walreceiver process is waiting for
the startup process to set initial data for streaming replication.
It's not waiting for any activity on a socket connected to a user
application or walsender. So this commit changes the type for
WalReceiverWaitStart wait event to IPC.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/cdacc27c-37ff-f1a4-20e2-ce19933abfcc@oss.nttdata.com
Commit 86c23a6eb2 changed the option to specify that postgres will
stop all other server processes by sending the signal SIGSTOP,
from -s to -T. But previously there were comments incorrectly
explaining that SIGSTOP behavior is set by -s option. This commit
fixes them.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210316.165141.1400441966284654043.horikyota.ntt@gmail.com
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
When accessing replication slot stats, introduced in 9868167500,
pgstat_read_statsfiles() reads the data into newly allocated
memory. Unfortunately the current memory context at that point is the
callers, leading to leaks and use-after-free dangers.
The fix is trivial, explicitly use pgStatLocalContext. There's some
potential for further improvements, but that's outside of the scope of
this bugfix.
No backpatch necessary, feature is only in HEAD.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210317230447.c7uc4g3vbs4wi32i@alap3.anarazel.de
Commit 3048898e dropped -ING from some wait event names that correspond
to barrier phases. Update the phases' names to match.
While we're here making cosmetic changes, also rename "DONE" to "FREE".
That pairs better with "ALLOCATE", and describes the activity that
actually happens in that phase (as we do for the other phases) rather
than describing a state. The distinction is clearer after bugfix commit
3b8981b6 split the phase into two. As for the growth barriers, rename
their "ALLOCATE" phase to "REALLOCATE", which is probably a better
description of what happens then. Also improve the comments about
the phases a bit.
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
Since commits 9f095299 and f98b8476 we don't poll the postmaster
pipe at all during crash recovery on Linux and FreeBSD, but on other
operating systems we were still doing it for every WAL record. Do it
less frequently on operating systems where system calls are required, at
the cost of delaying exit a bit after postmaster death. This avoids
expensive system calls reported to slow down CPU-bound recovery by as
much as 10-30%.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com
Discussion: https://postgr.es/m/7261eb39-0369-f2f4-1bb5-62f3b6083b5e@iki.fi
When shutdown is requested, checkpointer performs checkpoint or
restartpoint, and updates the statistics, before it exits. But previously
checkpointer didn't send those statistics to the stats collector.
Shutdown checkpoint and restartpoint are treated as requested ones
instead of scheduled ones, so the number of them are counted in
pg_stat_bgwriter.checkpoints_req column.
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
In walwriter's main loop, WAL stats message is only sent if enough time
has passed since last one was sent to reach PGSTAT_STAT_INTERVAL msecs.
This is necessary to avoid overloading to the stats collector. But this
can cause recent WAL stats to be unsent when walwriter exits.
To ensure that all the WAL stats are sent, this commit makes walwriter
force to send remaining WAL stats to the collector when it exits because
of shutdown request. Note that those remaining WAL stats can still be
unsent when walwriter exits with non-zero exit code (e.g., FATAL error).
This is OK because that walwriter exit leads to server crash and
subsequent recovery discards all the stats. So there is no need to send
remaining stats in that case.
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Up to now, if the DBA issued "pg_ctl stop -m immediate", the message
sent to clients was the same as for a crash-and-restart situation.
This is confusing, not least because the message claims that the
database will soon be up again, something we have no business
predicting.
Improve things so that we can generate distinct messages for the two
cases (and also recognize an ad-hoc SIGQUIT, should somebody try that).
To do that, add a field to pmsignal.c's shared memory data structure
that the postmaster sets just before broadcasting SIGQUIT to its
children. No interlocking seems to be necessary; the intervening
signal-sending and signal-receipt should sufficiently serialize accesses
to the field. Hence, this isn't any riskier than the existing usages
of pmsignal.c.
We might in future extend this idea to improve other
postmaster-to-children signal scenarios, although none of them
currently seem to be as badly overloaded as SIGQUIT.
Discussion: https://postgr.es/m/559291.1608587013@sss.pgh.pa.us
Same type of issue as in commit 53d4f5fef and earlier fixes; also
found by apparently-more-picky-than-the-buildfarm valgrind testing.
This one is an oversight in commit 986816750. Since that's new in
HEAD, no need for a back-patch.
Revert ac22929a26, as well as the followup fix 113d3591b8. Because it broke
the assumption that the startup process waiting for the recovery conflict
on buffer pin should be waken up only by buffer unpin or the timeout enabled
in ResolveRecoveryConflictWithBufferPin(). It caused, for example,
SIGHUP signal handler or walreceiver process to wake that startup process
up unnecessarily frequently.
Additionally, add the comments about why that dedicated latch that
the reverted patch tried to get rid of should not be removed.
Thanks to Kyotaro Horiguchi for the discussion.
Author: Fujii Masao
Discussion: https://postgr.es/m/d8c0c608-021b-3c73-fffd-3240829ee986@oss.nttdata.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
After autovacuum collects the relations to vacuum or analyze, it rechecks
whether each relation still needs to be vacuumed or analyzed before actually
doing that. Previously this recheck could be a significant overhead
especially when there were a very large number of relations. This was
because each recheck forced the statistics to be refreshed, and the refresh
of the statistics for a very large number of relations could cause heavy
overhead. There was the report that this issue caused autovacuum workers
to have gotten “stuck” in a tight loop of table_recheck_autovac() that
rechecks whether a relation needs to be vacuumed or analyzed.
This commit speeds up the recheck by making autovacuum worker reuse
the previously-read statistics for the recheck if possible. Then if that
"stale" statistics says that a relation still needs to be vacuumed or analyzed,
autovacuum refreshes the statistics and does the recheck again.
The benchmark shows that the more relations exist and autovacuum workers
are running concurrently, the more this change reduces the autovacuum
execution time. For example, when there are 20,000 tables and 10 autovacuum
workers are running, the benchmark showed that the change improved
the performance of autovacuum more than three times. On the other hand,
even when there are only 1000 tables and only a single autovacuum worker
is running, the benchmark didn't show any big performance regression by
the change.
Firstly POC patch was proposed by Jim Nasby. As the result of discussion,
we used Tatsuhito Kasahara's version of the patch using the approach
suggested by Tom Lane.
Reported-by: Jim Nasby
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/3FC6C2F2-8A47-44C0-B997-28830B5716D0@amazon.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
Currently only OpenSSL requires this initialization, but in the future
other SSL implementations are likely to need it as well. Abstracting
this functionality out into a separate function makes this cleaner and
more clear, and also removes the dependency on OpenSSL headers from
fork_process.c.
OpenSSL is special in that we need to initialize this random number
generator even if we're not going to use it directly, until we drop
support for everything prior to OpenSSL 1.1.1. (And of course also if we
actually use it). All other implementations are left empty at this time,
but more are expected to be added in the future.
Author: Daniel Gustafsson <daniel@yesql.se>, Michael Paquier <michael@paquier.xyz>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/F6291C3C-747C-4C93-BCE0-28BB420B1FF5@yesql.se
There is no outright bug here but it is better to be consistent with the
usage at other places in the same file. In the passing, fix a wrong
assertion in pgstat_recv_replslot.
Author: Kyotaro Horiguchi
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/20201104.175523.1704166915688949637.horikyota.ntt@gmail.com
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
We decided that the policy established in commit 7634bd4f6 for
the bgwriter, checkpointer, walwriter, and walreceiver processes,
namely that they should accept SIGQUIT at all times, really ought
to apply uniformly to all postmaster children. Therefore, get
rid of the duplicative and inconsistent per-process code for
establishing that signal handler and removing SIGQUIT from BlockSig.
Instead, make InitPostmasterChild do it.
The handler set up by InitPostmasterChild is SignalHandlerForCrashExit,
which just summarily does _exit(2). In interactive backends, we
almost immediately replace that with quickdie, since we would prefer
to try to tell the client that we're dying. However, this patch is
changing the behavior of autovacuum (both launcher and workers), as
well as walsenders. Those processes formerly also used quickdie,
but AFAICS that was just mindless copy-and-paste: they don't have
any interactive client that's likely to benefit from being told this.
The stats collector continues to be an outlier, in that it thinks
SIGQUIT means normal exit. That should probably be changed for
consistency, but there's another patch set where that's being
dealt with, so I didn't do so here.
Discussion: https://postgr.es/m/644875.1599933441@sss.pgh.pa.us
We use the timestamp of the global statfile if we are not able to
determine it for a particular database in case the entry for that database
doesn't exist. However, we were using it even when the statfile is
corrupt.
As there is no user reported issue and it is not clear if there is any
impact of this on actual application so decided not to backpatch.
Reported-by: Amit Kapila
Author: Amit Kapila
Reviewed-by: Sawada Masahiko, Magnus Hagander and Alvaro Herrera
Discussion: https://postgr.es/m/CAA4eK1J3oTJKyVq6v7K4d3jD+vtnruG9fHRib6UuWWsrwAR6Aw@mail.gmail.com
The bgwriter, checkpointer, walwriter, and walreceiver processes
claimed to allow SIGQUIT "at all times". In reality SIGQUIT
would get re-blocked during error recovery, because we didn't
update the actual signal mask immediately, so sigsetjmp() would
save and reinstate a mask that includes SIGQUIT.
This appears to be simply a coding oversight. There's never a
good reason to hold off SIGQUIT in these processes, because it's
going to just call _exit(2) which should be safe enough, especially
since the postmaster is going to tear down shared memory afterwards.
Hence, stick in PG_SETMASK() calls to install the modified BlockSig
mask immediately.
Also try to improve the comments around sigsetjmp blocks. Most of
them were just referencing postgres.c, which is misleading because
actually postgres.c manages the signals differently.
No back-patch, since there's no evidence that this is causing any
problems in the field.
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
Currently, no useful trace is left in the logs when the postmaster
is forced to use SIGKILL to shut down children that failed to respond
to SIGQUIT. Some questions were raised about how often that scenario
happens in the buildfarm, so let's add a LOG-level message showing
that it happened.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Although 58c6feccf fixed the case for SIGQUIT, we were still calling
proc_exit() from signal handlers for SIGTERM and timeout failures in
ProcessStartupPacket. Fortunately, at the point where that code runs,
we haven't yet connected to shared memory in any meaningful way, so
there is nothing we need to undo in shared memory. This means it
should be safe to use _exit(1) here, ie, not run any atexit handlers
but also inform the postmaster that it's not a crash exit.
To make sure nobody breaks the "nothing to undo" expectation, add
a cross-check that no on-shmem-exit or before-shmem-exit handlers
have been registered yet when we finish using these signal handlers.
This change is simple enough that maybe it could be back-patched,
but I won't risk that right now.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Bring the signal handling for startup-packet collection into line
with the policy established in commits bedadc732 and 8e19a8264,
namely don't risk running atexit callbacks when handling SIGQUIT.
Ideally, we'd not do so for SIGTERM or timeout interrupts either,
but that change seems a bit too risky for the back branches.
For now, just improve the comments in this area to describe the risk.
Also relocate where BackendInitialize re-disables these interrupts,
to minimize the code span where they're active. This doesn't buy
a whole lot of safety, but it can't hurt.
In passing, rename startup_die() to remove confusion about whether
it is for the startup process.
Like the previous commits, back-patch to all supported branches.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Commit 8e19a8264 changed the SIGQUIT handlers of almost all server
processes not to run atexit callbacks. The archiver process was
skipped, perhaps because it's not connected to shared memory; but
it's just as true here that running atexit callbacks in a signal
handler is unsafe. So let's make it work like the rest.
In HEAD and v13, we can use the common SignalHandlerForCrashExit
handler. Before that, just tweak pgarch_exit to use _exit(2)
explicitly.
Like the previous commit, back-patch to all supported branches.
Kyotaro Horiguchi, back-patching by me
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Because sigsetjmp() will restore the initial state with signals blocked,
the code path in bgworker.c for reporting an error and exiting would
execute that way. Usually this is fairly harmless; but if a parallel
worker had an error message exceeding the shared-memory communication
buffer size (16K) it would lock up, because it would wait for a
resume-sending signal from its parallel leader which it would never
detect.
To fix, just unblock signals at the appropriate point.
This can be shown to fail back to 9.6. The lack of parallel query
infrastructure makes it difficult to provide a simple test case for
9.5; but I'm pretty sure the issue exists in some form there as well,
so apply the code change there too.
Vignesh C, reviewed by Bharath Rupireddy, Robert Haas, and myself
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
Allow BufFile to support temporary files that can be used by the single
backend when the corresponding files need to be survived across the
transaction and need to be opened and closed multiple times. Such files
need to be created as a member of a SharedFileSet.
Additionally, this commit implements the interface for BufFileTruncate to
allow files to be truncated up to a particular offset and extends the
BufFileSeek API to support the SEEK_END case. This also adds an option to
provide a mode while opening the shared BufFiles instead of always opening
in read-only mode.
These enhancements in BufFile interface are required for the upcoming
patch to allow the replication apply worker, to handle streamed
in-progress transactions.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
This had gotten a little disjointed over time, and some of the grammar
was sloppy. Rewrite for more clarity.
In passing, re-pgindent some recently added comments.
No code changes.
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
Create LatchWaitSet at backend startup time, and use it to implement
WaitLatch(). This avoids repeated epoll/kqueue setup and teardown
system calls.
Reorder SubPostmasterMain() slightly so that we restore the postmaster
pipe and Windows signal emulation before we reach InitPostmasterChild(),
to make this work in EXEC_BACKEND builds.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
OpenSSL deprecated RAND_cleanup(), and OpenSSL 1.1.0 made it into a
no-op. Replace it with RAND_poll(), per an OpenSSL community
recommendation. While this has no user-visible consequences under
OpenSSL defaults, it might help under non-default settings.
Daniel Gustafsson, reviewed by David Steele and Michael Paquier.
Discussion: https://postgr.es/m/9B038FA5-23E8-40D0-B932-D515E1D8F66A@yesql.se
Previously we checked that the ssl pointer was not null, but this puts a
requirement on there being such a pointer which may not be true in
future multi-ssl-library supporting times. This seems to have been an
oversight in 9029f4b374, but hasn't really had any effect since we only
have one library.
Author: Daniel Gustafsson
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Previously, AsyncShmemInit forcibly initialized the first page of the
async SLRU, to save dealing with that case in asyncQueueAddEntries.
But this is a poor tradeoff, since many installations do not ever use
NOTIFY; for them, expending those cycles in AsyncShmemInit is a
complete waste. Besides, this only saves a couple of instructions
in asyncQueueAddEntries, which hardly seems likely to be measurable.
The real reason to change this now, though, is that now that we track
SLRU access stats, the existing code is causing the postmaster to
accumulate some access counts, which then get inherited into child
processes by fork(), messing up the statistics. Delaying the
initialization into the first child that does a NOTIFY fixes that.
Hence, we can revert f3d23d83e, which was an incorrect attempt at
fixing that issue. Also, add an Assert to pgstat.c that should
catch any future errors of the same sort.
Discussion: https://postgr.es/m/8367.1589391884@sss.pgh.pa.us
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
Previously since SLRUStats was not initialized, SLRU stats counters
could begin with non-zero value. Which could lead to incorrect results
in pg_stat_slru view.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/976bbb73-a112-de3c-c488-b34b64609793@oss.nttdata.com
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
Checkpointer uses its MyLatch to wake up when a checkpoint request is
received. But before commit c655077639 the latch was not used for
anything else, so the code could just go to sleep after each loop
without rechecking the sleeping condition. That commit added a separate
ResetLatch in its code path[1], which can cause a checkpoint to go
unnoticed for potentially a long time.
Fix by skipping sleep if any checkpoint flags are set. Also add a test
to verify this; authored by Kyotaro Horiguchi.
[1] CreateCheckPoint -> InvalidateObsoleteReplicationSlots ->
ConditionVariableTimeSleep
Report and diagnosis by Kyotaro Horiguchi.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.141956.891237856186513376.horikyota.ntt@gmail.com
This is for the benefit of running postgres under the rr
debugger. When using rr signal handlers running while a syscall is
active use an alternative stack. As e.g. bgworkers are started from
within signal handlers, the forked backend then has a different stack
base than postmaster. Previously that subsequently lead to those
processes triggering spurious "stack depth limit exceeded" errors.
Discussion: https://postgr.es/m/20200327182217.ubrrl32lyfhxfwk5@alap3.anarazel.de
This commit introduces new wait events RecoveryConflictSnapshot and
RecoveryConflictTablespace. The former is reported while waiting for
recovery conflict resolution on a vacuum cleanup. The latter is reported
while waiting for recovery conflict resolution on dropping tablespace.
Also this commit changes the code so that the wait event Lock is reported
while waiting in ResolveRecoveryConflictWithVirtualXIDs() for recovery
conflict resolution on a lock. Basically the wait event Lock is reported
during that wait, but previously was not reported only when that wait
happened in ResolveRecoveryConflictWithVirtualXIDs().
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
The default hook function sets the default password callback function.
In order to allow preloaded libraries to have an opportunity to override
the default, TLS initialization if now delayed slightly until after
shared preloaded libraries have been loaded.
A test module is provided which contains a trivial example that decodes
an obfuscated password for an SSL certificate.
Author: Andrew Dunstan
Reviewed By: Andreas Karlsson, Asaba Takanori
Discussion: https://postgr.es/m/04116472-818b-5859-1d74-3d995aab2252@2ndQuadrant.com
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
This commit introduces new wait events BackupWaitWalArchive and
RecoveryPause. The former is reported while waiting for the WAL files
required for the backup to be successfully archived. The latter is
reported while waiting for recovery in pause state to be resumed.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Robert Haas
Discussion: https://postgr.es/m/f0651f8c-9c96-9f29-0ff9-80414a15308a@oss.nttdata.com
This commit renames RecoveryWalAll and RecoveryWalStream wait events to
RecoveryWalStream and RecoveryRetrieveRetryInterval, respectively,
in order to make the names and what they are more consistent. For example,
previously RecoveryWalAll was reported as a wait event while the recovery
was waiting for WAL from a stream, and which was confusing because the name
was very different from the situation where the wait actually could happen.
The names of macro variables for those wait events also are renamed
accordingly.
This commit also changes the category of RecoveryRetrieveRetryInterval to
Timeout from Activity because the wait event is reported while waiting based
on wal_retrieve_retry_interval.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
Use the new MyBackendType instead. More similar changes for other "am
something" variables are possible. This one was just particularly
simple.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Add a new global variable MyBackendType that uses the same BackendType
enum that was previously only used by the stats collector. That way
several duplicate ways of checking what type a particular process is
can be simplified. Since it's no longer just for stats, move to
miscinit.c and rename existing functions to match the expanded
purpose.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Such an access became possible when commit 246a6c8f7 added more
aggressive cleanup of orphaned temp relations by autovacuum.
Since autovacuum's snapshot might be slightly stale, it could
attempt to access an already-dropped temp namespace, resulting in
an assertion failure or null-pointer dereference. (In practice,
since we don't drop temp namespaces automatically but merely
recycle them, this situation could only arise if a superuser does
a manual drop of a temp namespace. Still, that should be allowed.)
The core of the bug, IMO, is that isTempNamespaceInUse and its callers
failed to think hard about whether to treat "temp namespace isn't there"
differently from "temp namespace isn't in use". In hopes of forestalling
future mistakes of the same ilk, replace that function with a new one
checkTempNamespaceStatus, which makes the same tests but returns a
three-way enum rather than just a bool. isTempNamespaceInUse is gone
entirely in HEAD; but just in case some external code is relying on it,
keep it in the back branches, as a bug-compatible wrapper around the
new function.
Per report originally from Prabhat Kumar Sahu, investigated by Mahendra
Singh and Michael Paquier; the final form of the patch is my fault.
This replaces the failed fix attempt in a052f6cbb.
Backpatch as far as v11, as 246a6c8f7 was.
Discussion: https://postgr.es/m/CAKYtNAr9Zq=1-ww4etHo-VCC-k120YxZy5OS01VkaLPaDbv2tg@mail.gmail.com
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
This commit also updates wait event enum into alphabetical order.
Previously the enum entry for GSSOpenServer was added out-of-order.
Back-patch to v12 where commit b0b39f72b9 introduced
GSSOpenServer wait event. In v12, the commit doesn't include
the update of wait event enum, not to break ABI.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/949931aa-4ed4-d867-a7b5-de9c02b2292b@oss.nttdata.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The leaks have been detected by a Coverity run on Windows. No backpatch
is done as the leaks are minor.
While on it, make restricted token creation more consistent in its error
handling by logging an error instead of a warning if missing
advapi32.dll, which was missing in the NT4 days. Any modern platform
should have this DLL around. Now, if the library is not there, an error
is still reported back to the caller, and nothing is done do there is no
behavior change done in this commit.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQApa9MG0foPkgPX87fipk=vhnF2Xfg+CfUyR08h4R7Mywg@mail.gmail.com
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
A new function EmitProcSignalBarrier() can be used to emit a global
barrier which all backends that participate in the ProcSignal
mechanism must absorb, and a new function WaitForProcSignalBarrier()
can be used to wait until all relevant backends have in fact
absorbed the barrier.
This can be used to coordinate global state changes, such as turning
checksums on while the system is running.
There's no real client of this mechanism yet, although two are
proposed, but an enum has to have at least one element, so this
includes a placeholder type (PROCSIGNAL_BARRIER_PLACEHOLDER) which
should be replaced by the first real client of this mechanism to
get committed.
Andres Freund and Robert Haas, reviewed by Daniel Gustafsson and,
in earlier versions, by Magnus Hagander.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Commit 7dbfea3c45 thought it could get
away with removing this, but Thomas Munro reports, on behalf of the
buildfarm, that it's still needed at least on Windows to avoid
compiler warnings.
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
There seems to be no reason for every background process to have
its own flag indicating that a config-file reload is needed.
Instead, let's just use ConfigFilePending for that purpose
everywhere.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Some auxiliary processes, as well as the autovacuum launcher,
have interrupt handling code directly in their main loops.
Try to abstract things a little better by moving it into
separate functions.
This doesn't make any functional difference, and leaves
in place relatively large differences among processes in how
interrupts are handled, but hopefully it at least makes it
easier to see the commonalities and differences across
process types.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
AuxiliaryProcessMain does ProcSignalInit, so one might expect that
auxiliary processes would need to respond to SendProcSignal, but none
of the auxiliary processes do that. Change them to use
procsignal_sigusr1_handler instead of their own private handlers so
that they do. Besides seeming more correct, this is also less code. It
shouldn't make any functional difference right now because, as far as
we know, there are no current cases where SendProcSignal targets an
auxiliary process, but there are plans to change that in the future.
Andres Freund
Discussion: http://postgr.es/m/20181030051643.elbxjww5jjgnjaxg@alap3.anarazel.de
This gets rid of our former behavior of forcibly downcasing
the postmaster's hostname list and truncating the elements to
NAMEDATALEN. In principle, DNS hostnames are case-insensitive
so the first behavior should be harmless, and server hostnames
are seldom long enough for the second behavior to be an issue.
But it's still dubious, and an easy fix is available: just use
SplitGUCList instead.
AFAICT, all other SplitIdentifierString calls in the backend are
OK: either the items actually are SQL identifiers, or they are
keywords that are short and case-insensitive.
Per thinking about bug #16106. While this has been wrong for
a very long time, the lack of field complaints means there's
little reason to back-patch.
Discussion: https://postgr.es/m/16106-7d319e4295d08e70@postgresql.org
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Any callback set would have no meaning in the context of an exception.
As an autovacuum worker exits quickly in this context, this could be
only an issue within EmitErrorReport(), where the elog hook is for
example called. That's unlikely to going to be a problem, but let's be
clean and consistent with other code paths handling exceptions. This is
present since 2909419, which introduced autovacuum.
Author: Ashwin Agrawal
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALfoeisM+_+dgmAdAOHAu0k-ZpEHHqSSG=GRf3pKJGm8OqWX0w@mail.gmail.com
Backpatch-through: 9.4
POSIX sigaction(2) can be told to block a set of signals while a
signal handler executes. Make use of that instead of manually
blocking and unblocking signals in the postmaster's signal handlers.
This should save a few cycles, and it also prevents recursive
invocation of signal handlers when many signals arrive in close
succession. We have seen buildfarm failures that seem to be due to
postmaster stack overflow caused by such recursion (exacerbated by
a Linux PPC64 kernel bug).
This doesn't change anything about the way that it works on Windows.
Somebody might consider adjusting port/win32/signal.c to let it work
similarly, but I'm not in a position to do that.
For the moment, just apply to HEAD. Possibly we should consider
back-patching this, but it'd be good to let it age awhile first.
Discussion: https://postgr.es/m/14878.1570820201@sss.pgh.pa.us
The postmaster's code path for spawning a bgworker neglected to check
whether we already have the max number of live child processes. That's
a bit hard to hit, since it would necessarily be a transient condition;
but if we do, AssignPostmasterChildSlot() fails causing a postmaster
crash, as seen in a report from Bhargav Kamineni.
To fix, invoke canAcceptConnections() in the bgworker code path, as we
do in the other code paths that spawn children. Since we don't want
the same pmState tests in this case, add a child-process-type parameter
to canAcceptConnections() so that it can know what to do.
Back-patch to 9.5. In principle the same hazard exists in 9.4, but the
code is enough different that this patch wouldn't quite fix it there.
Given the tiny usage of bgworkers in that branch it doesn't seem worth
creating a variant patch for it.
Discussion: https://postgr.es/m/18733.1570382257@sss.pgh.pa.us
This is a second try at what commit 57431a911 tried to do, namely,
launch the syslogger before we open postmaster sockets so that our
messages about the sockets end up in the syslogger files. That
commit fell foul of a bunch of subtle issues caused by trying to
launch a postmaster child process before creating shared memory.
Rather than messing with that interaction, let's postpone opening
the sockets till after we launch the syslogger.
This would not have been terribly safe before commit 7de19fbc0,
because we relied on socket opening to detect whether any competing
postmasters were using the same port number. But now that we choose
IPC keys without regard to the port number, there's no interaction
to worry about.
Also delay creation of the external PID file (if requested) till after
the sockets are open, since external code could plausibly be relying
on that ordering of events. And postpone most of the work of
RemovePgTempFiles() so that that potentially-slow processing still
happens after we make the external PID file. We have to be a bit
careful about that last though: as noted in the discussion subsequent to
bug #15804, EXEC_BACKEND builds still have to clear the parameter-file
temp dir before launching the syslogger.
Patch by me; thanks to Michael Paquier for review/testing.
Discussion: https://postgr.es/m/15804-3721117bf40fb654@postgresql.org
This approach provides a much tighter binding between a data directory
and the associated SysV shared memory block (and SysV or named-POSIX
semaphores, if we're using those). Key collisions are still possible,
but only between data directories stored on different filesystems,
so the situation should be negligible in practice. More importantly,
restarting the postmaster with a different port number no longer
risks failing to identify a relevant shared memory block, even when
postmaster.pid has been removed. A standalone backend is likewise
much more certain to detect conflicting leftover backends.
(In the longer term, we might now think about deprecating the port as
a cluster-wide value, so that one postmaster could support sockets
with varying port numbers. But that's for another day.)
The hazards fixed here apply only on Unix systems; our Windows code
paths already use identifiers derived from the data directory path
name rather than the port.
src/test/recovery/t/017_shm.pl, which intends to test key-collision
cases, has been substantially rewritten since it can no longer use
two postmasters with identical port numbers to trigger the case.
Instead, use Perl's IPC::SharedMem module to create a conflicting
shmem segment directly. The test script will be skipped if that
module is not available. (This means that some older buildfarm
members won't run it, but I don't think that that results in any
meaningful coverage loss.)
Patch by me; thanks to Noah Misch and Peter Eisentraut for discussion
and review.
Discussion: https://postgr.es/m/16908.1557521200@sss.pgh.pa.us
The logic ending progress reporting for a backend entry introduced by
b6fb647 causes callers of pgstat_progress_end_command() to do some extra
work when track_activities is enabled as the process fields are reset in
the backend entry even if no command were started for reporting.
This resets the fields only if a command is registered for progress
reporting, and only if track_activities is enabled.
Author: Masahiho Sawada
Discussion: https://postgr.es/m/CAD21AoCry_vJ0E-m5oxJXGL3pnos-xYGCzF95rK5Bbi3Uf-rpA@mail.gmail.com
Backpatch-through: 9.6
A report from Alvaro Herrera shows that if we're in PM_STARTUP
state, and we spawn a dead_end child to reject some incoming
connection request, and that child dies with an unexpected exit
code, the postmaster does not respond well. We correctly send
SIGQUIT to the startup process, but then:
* if the startup process exits with nonzero exit code, as expected,
we thought that that indicated a crash and aborted startup.
* if the startup process exits with zero exit code, which is possible
due to the inherent race condition, we'd advance to PM_RUN state
which is fine --- but the code forgot that AbortStartTime would be
nonzero in this situation. We'd either die on the Asserts saying
that it was zero, or perhaps misbehave later on. (A quick look
suggests that the only misbehavior might be busy-waiting due to
DetermineSleepTime doing the wrong thing.)
To fix the first point, adjust the state-machine logic to recognize
that a nonzero exit code is expected after sending SIGQUIT, and have
it transition to a state where we can restart the startup process.
To fix the second point, change the Asserts to clear the variable
rather than just claiming it should be clear already.
Perhaps we could improve this further by not treating a crash of
a dead_end child as a reason for panic'ing the database. However,
since those child processes are connected to shared memory, that
seems a bit risky. There are few good reasons for a dead_end child
to report failure anyway (the cause of this in Alvaro's report is
quite unclear). On balance, therefore, a minimal fix seems best.
This is an oversight in commit 45811be94. While that was back-patched,
I'm hesitant to back-patch this change. The lack of reasons for a
dead_end child to fail suggests that the case should be very rare in
the field, which squares with the lack of reports; so it seems like
this might not be worth the risk of introducing new issues. In any
case we can let it bake awhile in HEAD before considering a back-patch.
Discussion: https://postgr.es/m/20190615160950.GA31378@alvherre.pgsql
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This commit reverts 57431a911d.
While that's still a good idea in the abstract, we found out
that there are multiple crasher bugs in it on Windows builds,
making the logging_collector option unusable on Windows.
There's no time left to fix these issues before 12beta1,
so revert the patch to allow Windows beta testing to proceed.
We'll try again at some future date.
Per bug #15804 from Yulian Khodorkovskiy and additional
investigation by Michael Paquier.
Discussion: https://postgr.es/m/15804-3721117bf40fb654@postgresql.org
We long ago decided to design the shared PgBackendStatus data structure to
minimize the cost of writing status updates, which means that writers just
have to increment the st_changecount field twice. That isn't hooked into
any sort of resource management mechanism, which means that if something
were to throw error between the two increments, the st_changecount field
would be left odd indefinitely. That would cause readers to lock up.
Now, since it's also a bad idea to leave the field odd for longer than
absolutely necessary (because readers will spin while we have it set),
the expectation was that we'd treat these segments like spinlock critical
sections, with only short, more or less straight-line, code in them.
That was fine as originally designed, but commit 9029f4b37 broke it
by inserting a significant amount of non-straight-line code into
pgstat_bestart(), code that is very capable of throwing errors, not to
mention taking a significant amount of time during which readers will spin.
We have a report from Neeraj Kumar of readers actually locking up, which
I suspect was due to an encoding conversion error in X509_NAME_to_cstring,
though conceivably it was just a garden-variety OOM failure.
Subsequent commits have loaded even more dubious code into pgstat_bestart's
critical section (and commit fc70a4b0d deserves some kind of booby prize
for managing to miss the critical section entirely, although the negative
consequences seem minimal given that the PgBackendStatus entry should be
seen by readers as inactive at that point).
The right way to fix this mess seems to be to compute all these values
into a local copy of the process' PgBackendStatus struct, and then just
copy the data back within the critical section proper. This plan can't
be implemented completely cleanly because of the struct's heavy reliance
on out-of-line strings, which we must initialize separately within the
critical section. But still, the critical section is far smaller and
safer than it was before.
In hopes of forestalling future errors of the same ilk, rename the
macros for st_changecount management to make it more apparent that
the writer-side macros create a critical section. And to prevent
the worst consequences if we nonetheless manage to mess it up anyway,
adjust those macros so that they really are a critical section, ie
they now bump CritSectionCount. That doesn't add much overhead, and
it guarantees that if we do somehow throw an error while the counter
is odd, it will lead to PANIC and a database restart to reset shared
memory.
Back-patch to 9.5 where the problem was introduced.
In HEAD, also fix an oversight in commit b0b39f72b: it failed to teach
pgstat_read_current_status to copy st_gssstatus data from shared memory to
local memory. Hence, subsequent use of that data within the transaction
would potentially see changing data that it shouldn't see.
Discussion: https://postgr.es/m/CAPR3Wj5Z17=+eeyrn_ZDG3NQGYgMEOY6JV6Y-WRRhGgwc16U3Q@mail.gmail.com
This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
On a 64-bit machine, if you set track_activity_query_size and
max_connections such that their product exceeds 1GB, shared memory
setup will still succeed (given enough RAM), but attempts to read
pg_stat_activity fail with "invalid memory alloc request size".
Work around that by using MemoryContextAllocHuge to allocate the
local copy of the activity strings. Using the "huge" API costs us
nothing extra in normal cases, and it seems better than throwing
an error and/or explaining to people why they can't do this.
This situation seems insanely profligate today, but who knows what
people will consider normal in ten or twenty years? So let's fix it
in HEAD but not worry about a back-patch.
Per report from James Tomson.
Discussion: https://postgr.es/m/1CFDCCD6-B268-48D8-85C8-400D2790B2C3@pushd.com
The message type for temp files and for checksum failures were missing
from the union. Due to the coding style used there was no compiler error
when this happend. So change the code to actively use the union thereby
producing a compiler error if the same mistake happens again, suggested
by Tom Lane.
Author: Julien Rouhaud
Reported-By: Tomas Vondra
Discussion: https://postgr.es/m/20190430163328.zd4rrlnbvgaqlcdz@development
Commit 3eb77eba5a renamed some functions, but forgot to
update some comments referencing to those functions.
This commit fixes those function names in the comments.
Kyotaro Horiguchi
In sigusr1_handler, don't ignore PMSIGNAL_ADVANCE_STATE_MACHINE based
on pmState. The restriction is unnecessary (PostmasterStateMachine
should work in any state), not future-proof (since it makes too many
assumptions about why the signal might be sent), and broken even today
because a race condition can make it necessary to respond to the signal
in PM_WAIT_READONLY state. The race condition seems unlikely, but
if it did happen, a hot-standby postmaster could fail to shut down
after receiving a smart-shutdown request.
In MaybeStartWalReceiver, don't clear the WalReceiverRequested flag
if the fork attempt fails. Leaving it set allows us to try
again in future iterations of the postmaster idle loop. (The startup
process would eventually send a fresh request signal, but this change
may allow us to retry the fork sooner.)
Remove an obsolete comment and unnecessary test in
PostmasterStateMachine's handling of PM_SHUTDOWN_2 state. It's not
possible to have a live walreceiver in that state, and AFAICT has not
been possible since commit 5e85315ea. This isn't a live bug, but the
false comment is quite confusing to readers.
In passing, rearrange sigusr1_handler's CheckPromoteSignal tests so that
we don't uselessly perform stat() calls that we're going to ignore the
results of.
Add some comments clarifying the behavior of MaybeStartWalReceiver;
I very nearly rearranged it in a way that'd reintroduce the race
condition fixed in e5d494d78. Mea culpa for not commenting that
properly at the time.
Back-patch to all supported branches. The PMSIGNAL_ADVANCE_STATE_MACHINE
change is the only one of even minor significance, but we might as well
keep this code in sync across branches.
Discussion: https://postgr.es/m/9001.1556046681@sss.pgh.pa.us
This allows table AMs that don't need these horizons. This was already
documented in the tableam relation_set_new_filenode callback, but an
assert prevented if from actually working (the test AM code contained
the change itself). Defang the asserts in the general code, and move
the stronger ones into heap AM.
Relatedly, after CLUSTER/VACUUM, we'd always assign a relfrozenxid /
relminmxid. Change the table_relation_copy_for_cluster() interface to
allow the AM to overwrite the horizons that get set on the pg_class
entry. This'd also in the future allow AMs like heap to compute a
relfrozenxid during rewrite that's the table's actual minimum rather
than a pre-determined value. Arguably it'd have been better to move
the whole computation / setting of those values into the callback, but
it seems likely that for other reasons it'd be better to be able to
use one value to vacuum/cluster multiple tables (e.g. a toast's
horizon shouldn't be different than the table's).
Reported-By: Heikki Linnakangas
Author: Andres Freund
Discussion: https://postgr.es/m/9a7fb9cc-2419-5db7-8840-ddc10c93f122@iki.fi
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20190408064141.GA2016666@rfd.leadboat.com
This adds a row to the pg_stat_database view with datoid 0 and datname
NULL for those objects that are not in a database. This was added
particularly for checksums, but we were already tracking more satistics
for these objects, just not returning it.
Also add a checksum_last_failure column that holds the timestamptz of
the last checksum failure that occurred in a database (or in a
non-dataabase file), if any.
Author: Julien Rouhaud <rjuju123@gmail.com>
transaction.
The transaction that is initiated by the parallel worker to cooperate
with the actual transaction started by the main backend to complete the
query execution should not be counted as a separate transaction. The
other internal transactions started and committed by the parallel worker
are still counted as separate transactions as we that is what we do in
other places like autovacuum.
This will partially fix the bloat in transaction stats due to additional
transactions performed by parallel workers. For a complete fix, we need to
decide how we want to show all the transactions that are started internally
for various operations and that is a matter of separate patch.
Reported-by: Haribabu Kommi
Author: Haribabu Kommi
Reviewed-by: Amit Kapila, Jamison Kirk and Rahila Syed
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAJrrPGc9=jKXuScvNyQ+VNhO0FZk7LLAShAJRyZjnedd2D61EQ@mail.gmail.com
We've long had reports of intermittent "could not reattach to shared
memory" errors on Windows. Buildfarm member dory fails that way when
PGSharedMemoryReAttach() execution overlaps with creation of a thread
for the process's "default thread pool". Fix that by providing a second
region to receive asynchronous allocations that would otherwise intrude
into UsedShmemSegAddr. In pgwin32_ReserveSharedMemoryRegion(), stop
trying to free reservations landing at incorrect addresses; the caller's
next step has been to terminate the affected process. Back-patch to 9.4
(all supported versions).
Reviewed by Tom Lane. He also did much of the prerequisite research;
see commit bcbf2346d6.
Discussion: https://postgr.es/m/20190402135442.GA1173872@rfd.leadboat.com
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
Since its introduction in 19dc233c, current_logfiles has been assigned
the same permissions as a log file, which can be enforced with
log_file_mode. This setup can lead to incompatibility problems with
group access permissions as current_logfiles is not located in the log
directory, but at the root of the data folder. Hence, if group
permissions are used but log_file_mode is more restrictive, a backup
with a user in the group having read access could fail even if the log
directory is located outside of the data folder.
Per discussion with the folks mentioned below, we have concluded that
current_logfiles should not be treated as a log file as it only stores
metadata related to log files, and that it should use the same
permissions as all other files in the data directory. This solution has
the merit to be simple and fixes all the interaction problems between
group access and log_file_mode.
Author: Haribabu Kommi
Reviewed-by: Stephen Frost, Robert Haas, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAJrrPGcEotF1P7AWoeQyD3Pqr-0xkQg_Herv98DjbaMj+naozw@mail.gmail.com
Backpatch-through: 11, where group access has been added.
Commit 6f6a6d8b1 introduced a delay of up to 2 seconds if we're trying
to request a checkpoint but the checkpointer hasn't started yet (or,
much less likely, our kill() call fails). However buildfarm experience
shows that that's not quite enough for slow or heavily-loaded machines.
There's no good reason to assume that the checkpointer won't start
eventually, so we may as well make the timeout much longer, say 60 sec.
However, if the caller didn't say CHECKPOINT_WAIT, it seems like a bad
idea to be waiting at all, much less for as long as 60 sec. We can
remove the need for that, and make this whole thing more robust, by
adjusting the code so that the existence of a pending checkpoint
request is clear from the contents of shared memory, and making sure
that the checkpointer process will notice it at startup even if it did
not get a signal. In this way there's no need for a non-CHECKPOINT_WAIT
call to wait at all; if it can't send the signal, it can nonetheless
assume that the checkpointer will eventually service the request.
A potential downside of this change is that "kill -INT" on the checkpointer
process is no longer enough to trigger a checkpoint, should anyone be
relying on something so hacky. But there's no obvious reason to do it
like that rather than issuing a plain old CHECKPOINT command, so we'll
assume that nobody is. There doesn't seem to be a way to preserve this
undocumented quasi-feature without introducing race conditions.
Since a principal reason for messing with this is to prevent intermittent
buildfarm failures, back-patch to all supported branches.
Discussion: https://postgr.es/m/27830.1552752475@sss.pgh.pa.us
Many places need both, so this allows a few functions to take one
fewer parameter. More importantly, as soon as we add a VACUUM
option that takes a non-Boolean parameter, we need to replace
'int options' with a struct, and it seems better to think
of adding more fields to VacuumParams rather than passing around
both VacuumParams and a separate struct as well.
Patch by me, reviewed by Masahiko Sawada
Discussion: http://postgr.es/m/CA+Tgmob6g6-s50fyv8E8he7APfwCYYJ4z0wbZC2yZeSz=26CYQ@mail.gmail.com
Andres Freund
Thomas Munro
Heikki Linnakangas
Michael Paquier
Daniel Gustafsson
Peter Eisentraut
Peter Geoghegan
Fujii Masao
Tom Lane
Alvaro Herrera
Amit Kapila
Etsuro Fujita
Stephen Frost
Tomas Vondra
Magnus Hagander
Bruce Momjian
Noah Misch
Robert Haas
David Rowley
Andrew Dunstan