Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
Previously we displayed "DSMFillZeroWrite" while in posix_fallocate(),
because we shared the same wait event for "mmap" and "posix" DSM types.
Let's introduce a new wait event "DSMAllocate", to be more accurate.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220711174518.yldckniicknsxgzl%40awork3.anarazel.de
In early releases of the DSM infrastructure, it was possible to resize
segments. That was removed in release 12 by commit 3c60d0fa. Now the
ftruncate() + posix_fallocate() sequence during DSM segment creation has
a redundant step: we're always extending from zero to the desired size,
so we might as well just call posix_fallocate().
Let's also include the remaining ftruncate() call (non-Linux POSIX
systems) in the wait event reporting, for good measure.
Discussion: https://postgr.es/m/CA%2BhUKGJSm-nq8s%2B_59zb7NbFQF-OS%3DxTnTAiGLrQpuSmU2y_1A%40mail.gmail.com
On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).
Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).
On further reflection, that was not a great choice for at least two
reasons:
1. If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.
2. If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates. posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.
Therefore, for now, we'll simply block most signals to guarantee
progress. SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate. For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.
Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Create an optional region in the main shared memory segment that can be
used to acquire and release "fast" DSM segments, and can benefit from
huge pages allocated at cluster startup time, if configured. Fall back
to the existing mechanisms when that space is full. The size is
controlled by a new GUC min_dynamic_shared_memory, defaulting to 0.
Main region DSM segments initially contain whatever garbage the memory
held last time they were used, rather than zeroes. That change revealed
that DSA areas failed to initialize themselves correctly in memory that
wasn't zeroed first, so fix that problem.
Discussion: https://postgr.es/m/CA%2BhUKGLAE2QBv-WgGp%2BD9P_J-%3Dyne3zof9nfMaqq1h3EGHFXYQ%40mail.gmail.com
This reverts the parts of commit 17a28b0364
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Change all the auxiliary error-reporting routines to return void,
now that we no longer need to pretend they are passing something
useful to errfinish(). While this probably doesn't save anything
significant at the machine-code level, it allows detection of some
additional types of mistakes.
Pass the error location details (__FILE__, __LINE__, PG_FUNCNAME_MACRO)
to errfinish not errstart. This shaves a few cycles off the case where
errstart decides we're not going to emit anything.
Re-implement elog() as a trivial wrapper around ereport(), removing
the separate support infrastructure it used to have. Aside from
getting rid of some now-surplus code, this means that elog() now
really does have exactly the same semantics as ereport(), in particular
that it can skip evaluation work if the message is not to be emitted.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
Chris Travers reported that the startup process can repeatedly try to
cancel a backend that is in a posix_fallocate()/EINTR loop and cause it
to loop forever. Teach the retry loop to give up if an interrupt is
pending. Don't actually check for interrupts in that loop though,
because a non-local exit would skip some clean-up code in the caller.
Back-patch to 9.4 where DSM was added (and posix_fallocate() was later
back-patched).
Author: Chris Travers
Reviewed-by: Ildar Musin, Murat Kabilov, Oleksii Kliukin
Tested-by: Oleksii Kliukin
Discussion: https://postgr.es/m/CAN-RpxB-oeZve_J3SM_6%3DHXPmvEG%3DHX%2B9V9pi8g2YR7YW0rBBg%40mail.gmail.com
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
One improbable error-exit path in this function used close() where
it should have used CloseTransientFile(). This is unlikely to be
hit in the field, and I think the consequences wouldn't be awful
(just an elog(LOG) bleat later). But a bug is a bug, so back-patch
to 9.4 where this code came in.
Pan Bian
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
posix_fallocate() is not quite a drop-in replacement for fallocate(),
because it is defined to return the error code as its function result,
not in "errno". I (tgl) missed this because RHEL6's version seems
to set errno as well. That is not the case on more modern Linuxen,
though, as per buildfarm results.
Aside from fixing the return-convention confusion, remove the test
for ENOSYS; we expect that glibc will mask that for posix_fallocate,
though it does not for fallocate. Keep the test for EINTR, because
POSIX specifies that as a possible result, and buildfarm results
suggest that it can happen in practice.
Back-patch to 9.4, like the previous commit.
Thomas Munro
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
On Linux, shared memory segments created with shm_open() are backed by
swap files created in tmpfs. If the swap file needs to be extended,
but there's no tmpfs space left, you get a very unfriendly SIGBUS trap.
To avoid this, force allocation of the full request size when we create
the segment. This adds a few cycles, but none that we wouldn't expend
later anyway, assuming the request isn't hugely bigger than the actual
need.
Make this code #ifdef __linux__, because (a) there's not currently a
reason to think the same problem exists on other platforms, and (b)
applying posix_fallocate() to an FD created by shm_open() isn't very
portable anyway.
Back-patch to 9.4 where the DSM code came in.
Thomas Munro, per a bug report from Amul Sul
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
We must test GetLastError() even when CreateFileMapping() returns a
non-null handle. If that value were left over from some previous system
call, we might be fooled into thinking the segment already existed.
Experimentation on Windows 7 suggests that CreateFileMapping() clears
the error code on success, but it is not documented to do so, so let's
not rely on that happening in all Windows releases.
Amit Kapila
Discussion: <20811.1474390987@sss.pgh.pa.us>
Otherwise, attempts to run multiple postmasters running on the same
machine may fail, because Windows sometimes returns ERROR_ACCESS_DENIED
rather than ERROR_ALREADY_EXISTS when there is an existing segment.
Hitting this bug is much more likely because of another defect not
fixed by this patch, namely that dsm_postmaster_startup() uses
random() which returns the same value every time. But that's not
a reason not to fix this.
Kyotaro Horiguchi and Amit Kapila, reviewed by Michael Paquier
Discussion: <CAA4eK1JyNdMeF-dgrpHozDecpDfsRZUtpCi+1AbtuEkfG3YooQ@mail.gmail.com>
If you have previously pinned a segment and decide that you don't
actually want to keep it around until shutdown, this new API lets you
remove the pin. This is pretty trivial except on Windows, where it
requires closing the duplicate handle that was used to implement the
pin.
Thomas Munro and Amit Kapila, reviewed by Amit Kapila and by me.
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
Tom Lane
Bruce Momjian
Michael Paquier
Thomas Munro
Andres Freund
Amit Kapila
Peter Eisentraut
Peter Eisentraut
Stephen Frost
Robert Haas
Simon Riggs