This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
Query planning is affected by a number of configuration options, and it
may be crucial to know which of those options were set to non-default
values. With this patch you can say EXPLAIN (SETTINGS ON) to include
that information in the query plan. Only options affecting planning,
with values different from the built-in default are printed.
This patch also adds auto_explain.log_settings option, providing the
same capability in auto_explain module.
Author: Tomas Vondra
Reviewed-by: Rafia Sabih, John Naylor
Discussion: https://postgr.es/m/e1791b4c-df9c-be02-edc5-7c8874944be0@2ndquadrant.com
This is useful to obtain a view of the different transaction types in an
application, regardless of the durations of the statements each runs.
Author: Adrien Nayrat
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Andres Freund
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
Historically guc.c has just refused examples like set work_mem = '30.1GB',
but it seems more useful for it to take that and round off the value to
some reasonable approximation of what the user said. Just rounding to
the parameter's native unit would work, but it would lead to rather
silly-looking settings, such as 31562138kB for this example. Instead
let's round to the nearest multiple of the next smaller unit (if any),
producing 30822MB.
Also, do the units conversion math in floating point and round to integer
(if needed) only at the end. This produces saner results for inputs that
aren't exact multiples of the parameter's native unit, and removes another
difference in the behavior for integer vs. float parameters.
In passing, document the ability to use hex or octal input where it
ought to be documented.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Further buildfarm testing shows that on the machines that are failing
ac75959cd's test case, what we're actually getting from strtod("-infinity")
is a syntax error (endptr == value) not ERANGE at all. This test case
is not worth carrying two sets of expected output for, so just remove it,
and revert commit b212245f9's misguided attempt to work around the platform
dependency.
Discussion: https://postgr.es/m/E1h33xk-0001Og-Gs@gemulon.postgresql.org
Instead, just proceed with the infinity or zero result that it should
return for overflow/underflow. This avoids a platform dependency,
in that various versions of strtod are inconsistent about whether they
signal ERANGE for a value that's specified as infinity.
It's possible this won't be enough to remove the buildfarm failures
we're seeing from ac75959cd, in which case I'll take out the infinity
test case that commit added. But first let's see if we can fix it.
Discussion: https://postgr.es/m/E1h33xk-0001Og-Gs@gemulon.postgresql.org
This reverts commit bd09503e63.
Per discussion, it seems like what we should do instead is to
reduce the default value of autovacuum_vacuum_cost_delay by the
same factor. That's functionally equivalent as long as the
platform can accurately service the smaller delay request, which
should be true on anything released in the last 10 years or more.
And smaller, more-closely-spaced delays are better in terms of
providing a steady I/O load.
Discussion: https://postgr.es/m/28720.1552101086@sss.pgh.pa.us
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
This should reduce confusion in cases where we've applied a units
conversion, so that the number being reported (and the quoted range
limits) are in some other units than what the user gave in the
setting we're rejecting.
Some of the changes here assume that float GUCs can have units,
which isn't true just yet, but will be shortly.
Discussion: https://postgr.es/m/3811.1552169665@sss.pgh.pa.us
None of the code that uses GUC values is really prepared for them to
hold NaN, but parse_real() didn't have any defense against accepting
such a value. Treat it the same as a syntax error.
I haven't attempted to analyze the exact consequences of setting any
of the float GUCs to NaN, but since they're quite unlikely to be good,
this seems like a back-patchable bug fix.
Note: we don't need an explicit test for +-Infinity because those will
be rejected by existing range checks. I added a regression test for
that in HEAD, but not older branches because the spelling of the value
in the error message will be platform-dependent in branches where we
don't always use port/snprintf.c.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
The original 200 default value was set back in f425b605f4 when the cost
delay settings were first added. Hardware has improved quite a bit since
then and we've also made improvements such as sorting buffers during
checkpoints (9cd00c457e) which should result in less random writes.
This low default value was reportedly causing problems with badly
configured servers and in the absence of a native method to remove
excessive bloat from tables without incurring an AccessExclusiveLock, this
often made cleaning up the damage caused by badly configured auto-vacuums
difficult.
It seems more likely that someone will notice that auto-vacuum is running
too quickly than too slowly, so let's go all out and multiple the default
value for the setting by 10. With the default vacuum_cost_page_dirty and
autovacuum_vacuum_cost_delay (assuming a page size of 8192 bytes), this
allows autovacuum a theoretical maximum dirty write rate of around 39MB/s
instead of just 3.9MB/s.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_YbXC2qTMPyCbmsPiKvZYwpuQNQMohiRXLj1r=8_rYvw@mail.gmail.com
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
After 578b229718 / the removal of WITH OIDS support, older dump files
containing
SET default_with_oids = false;
either report unnecessary errors (as the subsequent tables have no
oids) or even fail to restore entirely (when using transaction mode).
To avoid that, re-add the GUC, but don't allow setting it to true.
Per complaint from Tom Lane.
Author: Amit Khandekar, editorialized by me
Discussion: https://postgr.es/m/CAJ3gD9dZyxrtL0rJfoNoOj6v7fJSDaXBngi9wy5XU8m-ioXhAA@mail.gmail.com
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
As per the error message style guide of the documentation, those should
be full sentences.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://1E8D49B4-16BC-4420-B4ED-58501D9E076B@yesql.se
Places that are testing for *printf failure ought to include the format
string in their error reports, since bad-format-string is one of the
more likely causes of such failure. This both makes it easier to find
and repair the mistake, and provides at least some useful info to the
user who stumbles across such a problem.
Also, tighten snprintf.c to report EINVAL for an invalid flag or
final character in a format %-spec (including the case where the
%-spec is missing a final character altogether). This seems like
better project policy, and it also allows removing an instruction
or two from the hot code path.
Back-patch the error reporting change in pvsnprintf, since it should be
harmless and may be helpful; but not the snprintf.c change.
Per discussion of bug #15511 from Ertuğrul Kahveci, which reported an
invalid translated format string. These changes don't fix that error,
but they should improve matters next time we make such a mistake.
Discussion: https://postgr.es/m/15511-1d8b6a0bc874112f@postgresql.org
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
The previous recovery.conf regime accepted multiple recovery_target*
settings and used the last one. This does not translate well to the
general GUC system. Specifically, under EXEC_BACKEND, the settings
are written out not in any particular order, so the order in which
they were originally set is not available to new processes.
Rather than redesign the GUC system, it was decided to abandon the old
behavior and only allow one recovery target setting. A second setting
will cause an error. However, it is allowed to set the same parameter
multiple times or unset a parameter and set a different one.
Discussion: https://www.postgresql.org/message-id/flat/27802171543235530%40iva2-6ec8f0a6115e.qloud-c.yandex.net#701a59c837ad0bf8c244344aaf3ef5a4
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
It was previously a string setting that was converted into an enum by
custom code, but using the GUC enum facility seems much simpler and
doesn't change any functionality, except that
set transaction_isolation='default';
no longer works, but that was never documented and doesn't work with
any other transaction characteristics. (Note that this is not the
same as RESET or SET TO DEFAULT, which still work.)
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/457db615-e84c-4838-310e-43841eb806e5@iki.fi
The connection authorized message has quite a bit of useful information
in it, but didn't include the application_name (when provided), so let's
add that as it can be very useful.
Note that at the point where we're emitting the connection authorized
message, we haven't processed GUCs, so it's not possible to get this by
using log_line_prefix (which pulls from the GUC). There's also
something to be said for having this included in the connection
authorized message and then not needing to repeat it for every line, as
having it in log_line_prefix would do.
The GUC cleans the application name to pure-ascii, so do that here too,
but pull out the logic for cleaning up a string into its own function
in common and re-use it from those places, and check_cluster_name which
was doing the same thing.
Author: Don Seiler <don@seiler.us>
Discussion: https://postgr.es/m/CAHJZqBB_Pxv8HRfoh%2BAB4KxSQQuPVvtYCzMg7woNR3r7dfmopw%40mail.gmail.com
Being able to use a value that can be changed on a connection basis is
useful with clusters distributed geographically, and makes failure
detection more flexible. A note is added in the documentation about the
use of "options" in primary_conninfo, which can be hard to grasp for
newcomers with the need of two single quotes when listing a set of
parameters.
Author: Tsunakawa Takayuki
Reviewed-by: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1FAAD3AE@G01JPEXMBYT05
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Discussion: https://postgr.es/m/20180914222657.mw25esrzbcnu6qlu@alap3.anarazel.de
While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot. A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
- GetConfigOptionByNum should translate strings. This part is not
back-patched as after a minor upgrade this could be surprising for
users.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3
Since our substitute snprintf now returns a C99-compliant result,
there's no need anymore to have complicated code to cope with pre-C99
behavior. We can just make configure substitute snprintf.c if it finds
that the system snprintf() is pre-C99. (Note: I do not believe that
there are any platforms where this test will trigger that weren't
already being rejected due to our other C99-ish feature requirements for
snprintf. But let's add the check for paranoia's sake.) Then, simplify
the call sites that had logic to cope with the pre-C99 definition.
I also dropped some stuff that was being paranoid about the possibility
of snprintf overrunning the given buffer. The only reports we've ever
heard of that being a problem were for Solaris 7, which is long dead,
and we've sure not heard any reports of these assertions triggering in
a long time. So let's drop that complexity too.
Likewise, drop some code that wasn't trusting snprintf to set errno
when it returns -1. That would be not-per-spec, and again there's
no real reason to believe it is a live issue, especially not for
snprintfs that pass all of configure's feature checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
This allows querying the SSL implementation used on the server side.
It's analogous to using PQsslAttribute(conn, "library") in libpq.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
Also, fix the pg_settings view to display source filename and line
number when invoked by a pg_read_all_settings member. This addition by
me (Álvaro).
Also, fix wording of the comment in GetConfigOption regarding the
restriction it implements, renaming the parameter for extra clarity.
Noted by Michaël.
These were all oversight in commit 25fff40798fc; backpatch to pg10,
where that commit first appeared.
Author: Laurenz Albe
Reviewed-by: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/1519917758.6586.8.camel@cybertec.at
Commit 6e7baa3227 added support for "B" unit, for specifying config options
in bytes. However, it was only accepted in GUC_UNIT_BYTE settings,
wal_segment_size and track_activity_query_size, and not e.g. in work_mem.
This patch makes it consistent, so that "B" accepted in all the same
contexts where "kB", "MB", and so forth are accepted.
Add "B" to the list of accepted units in the error hint, along with "kB",
"MB", etc.
Add an entry in the conversion table for "TB" to "B" conversion. A terabyte
is out of range for any GUC_UNIT_BYTE option, so you always get an "out of
range" error with that, but without it, you get a confusing error message
that claims that "TB" is not an accepted unit, with a hint that nevertheless
lists "TB" as an accepted unit.
Reviewed-by: Alexander Korotkov, Andres Freund
Discussion: https://www.postgresql.org/message-id/1bfe7f4a-7e22-aa6e-7b37-f4d222ed2d67@iki.fi
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
Failure to use DatumGetFoo/FooGetDatum macros correctly, or at all,
causes some warnings about sign conversion. This is just cosmetic
at the moment but in principle it's a type violation, so clean up
the instances I could find.
autoprewarm.c and sharedfileset.c contained code that unportably
assumed that pid_t is the same size as int. We've variously dealt
with this by casting pid_t to int or to unsigned long for printing
purposes; I went with the latter.
Fix uninitialized-variable warning in RestoreGUCState. This is
a live bug in some sense, but of no great significance given that
nobody is very likely to care what "line number" is associated with
a GUC that hasn't got a source file recorded.
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.
This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.
To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories. PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.
Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds. Once that is resolved we can remove the superfluous
read from disk.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Performing JIT compilation for deforming gains performance benefits
over unJITed deforming from compile-time knowledge of the tuple
descriptor. Fixed column widths, NOT NULLness, etc can be taken
advantage of.
Right now the JITed deforming is only used when deforming tuples as
part of expression evaluation (and obviously only if the descriptor is
known). It's likely to be beneficial in other cases, too.
By default tuple deforming is JITed whenever an expression is JIT
compiled. There's a separate boolean GUC controlling it, but that's
expected to be primarily useful for development and benchmarking.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
In addition to the interpretation of expressions (which back
evaluation of WHERE clauses, target list projection, aggregates
transition values etc) support compiling expressions to native code,
using the infrastructure added in earlier commits.
To avoid duplicating a lot of code, only support emitting code for
cases that are likely to be performance critical. For expression steps
that aren't deemed that, use the existing interpreter.
The generated code isn't great - some architectural changes are
required to address that. But this already yields a significant
speedup for some analytics queries, particularly with WHERE clauses
filtering a lot, or computing multiple aggregates.
Author: Andres Freund
Tested-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Disable JITing for VALUES() nodes.
VALUES() nodes are only ever executed once. This is primarily helpful
for debugging, when forcing JITing even for cheap queries.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This commit introduces the ability to actually generate code using
LLVM. In particular, this adds:
- Ability to emit code both in heavily optimized and largely
unoptimized fashion
- Batching facility to allow functions to be defined in small
increments, but optimized and emitted in executable form in larger
batches (for performance and memory efficiency)
- Type and function declaration synchronization between runtime
generated code and normal postgres code. This is critical to be able
to access struct fields etc.
- Developer oriented jit_dump_bitcode GUC, for inspecting / debugging
the generated code.
- per JitContext statistics of number of functions, time spent
generating code, optimizing, and emitting it. This will later be
employed for EXPLAIN support.
This commit doesn't yet contain any code actually generating
functions. That'll follow in later commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with contributions by Pierre Ducroquet
Testing-By: Thomas Munro, Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Pending some solution for the problems noted in commit 742869946,
disallow dynamic creation of GUC_LIST_QUOTE variables.
If there are any extensions out there using this feature, they'd not
be happy for us to start enforcing this rule in minor releases, so
this is a HEAD-only change. The previous commit didn't make things
any worse than they already were for such cases.
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
We were independently checking ReservedBackends < MaxConnections and
max_wal_senders < MaxConnections, but because walsenders aren't allowed
to use superuser-reserved connections, that's really the wrong thing.
Correct behavior is to insist on ReservedBackends + max_wal_senders being
less than MaxConnections. Fix the code and associated documentation.
This has been wrong for a long time, but since the situation probably
hardly ever arises in the field (especially pre-v10, when the default
for max_wal_senders was zero), no back-patch.
Discussion: https://postgr.es/m/28271.1520195491@sss.pgh.pa.us
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
Add support for huge pages (called large pages on Windows) to the
Windows build.
This (probably) breaks compatibility with Windows versions prior to
Windows 2003 or Windows Vista.
Authors: Takayuki Tsunakawa and Thomas Munro
Reviewed by: Magnus Hagander, Amit Kapila
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
Up to now, ACL checks for large objects happened at the level of
the SQL-callable functions, which led to CVE-2017-7548 because of a
missing check. Push them down to be enforced in inv_api.c as much
as possible, in hopes of preventing future bugs. This does have the
effect of moving read and write permission errors to happen at lo_open
time not loread or lowrite time, but that seems acceptable.
Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Without this fix, dropping a role can sometimes result in parallel
query failures in sessions that have used "SET ROLE" to assume the
dropped role, even if that setting isn't active any more.
Report by Pavan Deolasee. Patch by Amit Kapila, reviewed by me.
Discussion: http://postgr.es/m/CABOikdOomRcZsLsLK+Z+qENM1zxyaWnAvFh3MJZzZnnKiF+REg@mail.gmail.com
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Discussion: https://www.postgresql.org/message-id/fde71ff1-5858-90c8-99a9-1c2427e7bafb@iki.fi
To prevent future bugs along the lines of the one corrected by commit
8ff518699f, or find any that remain
in the current code, add an Assert() that the difference between
parallel_register_count and parallel_terminate_count is in a sane
range.
Kuntal Ghosh, with considerable tidying-up by me, per a suggestion
from Neha Khatri. Reviewed by Tomas Vondra.
Discussion: http://postgr.es/m/CAFO0U+-E8yzchwVnvn5BeRDPgX2z9vZUxQ8dxx9c0XFGBC7N1Q@mail.gmail.com
This commit also does
- add REPLICATION_SUBSCRIBERS into config_group
- mark max_logical_replication_workers and max_sync_workers_per_subscription
as REPLICATION_SUBSCRIBERS parameters
- move those parameters into "Subscribers" section in postgresql.conf.sample
Author: Masahiko Sawada, Petr Jelinek and me
Reported-by: Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoAonSCoa=v=87ZO3vhfUZA1k_E2XRNHTt=xioWGUa+0ug@mail.gmail.com
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
The previous default 'pg_log' might have indicated by its "pg_" prefix
that it is an internal system directory. The new default is more in
line with the typical naming of directories with user-facing log files.
Together with the renaming of pg_clog and pg_xlog, this should clear up
that difference.
Author: Andreas Karlsson <andreas@proxel.se>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
There is no particularly good reason to limit this value to 1000,
so increase the limit to INT_MAX / 2, the same limit we use for
shared_buffers. It's not clear how much practical effect larger
settings will have, but there seems no harm in letting people try it.
Jim Nasby, less a comment change I stripped out.
Discussion: http://postgr.es/m/f6e58a22-030b-eb8a-5457-f62fb08d701c@BlueTreble.com
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
The serialization code dumped core for a string-valued GUC whose value
is NULL, which is a legal state. The infrastructure isn't capable of
transmitting that state exactly, but fortunately, transmitting an empty
string instead should be close enough (compare, eg, commit e45e990e4).
The code potentially underestimated the space required to format a
real-valued variable, both because it made an unwarranted assumption that
%g output would never be longer than %e output, and because it didn't count
right even for %e format. In practice this would pretty much always be
masked by overestimates for other variables, but it's still wrong.
Also fix boundary-case error in read_gucstate, incorrect handling of the
case where guc_sourcefile is non-NULL but zero length (not clear that can
happen, but if it did, this code would get totally confused), and
confusingly useless check for a NULL result from read_gucstate.
Andreas Seltenreich discovered the core dump; other issues noted while
reading nearby code. Back-patch to 9.5 where this code was introduced.
Michael Paquier and Tom Lane
Discussion: <871sy78wno.fsf@credativ.de>
The intent of the test is to check whether XLOG_SEG_SIZE is in a
particular range, but actually in one case it compares XLOG_BLCKSZ
by mistake. Repair.
Commit 88e9823026 introduced this
faulty test.
Kuntal Ghosh, reviewed by Michael Paquier.
This value might not be to everyone's taste; in particular, some
people might prefer %t to %m, and others may want %u, %d, or other
fields. However, it's a vast improvement on the old default of ''.
Christoph Berg
Commit 88e982302 invented GUC_UNIT_XSEGS for min_wal_size and max_wal_size,
but neglected to make it display sensibly in pg_settings.unit (by adding a
case to the switch in GetConfigOptionByNum). Fix that, and adjust said
switch to throw a run-time error the next time somebody forgets.
In passing, avoid using a static buffer for the output string --- the rest
of this function pstrdup's from a local buffer, and I see no very good
reason why the units code should do it differently and less safely.
Per report from Otar Shavadze. Back-patch to 9.5 where the new unit type
was added.
Report: <CAG-jOyA=iNFhN+yB4vfvqh688B7Tr5SArbYcFUAjZi=0Exp-Lg@mail.gmail.com>
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
The documentation states that the default value is 8MB, but this was
only true at BLCKSZ = 8kB, because the default was hard-coded as 1024.
Make the code match the docs by computing the default as 8MB/BLCKSZ.
Oversight in commit 75be66464, noted pursuant to a gripe from Peter E.
Discussion: <90634e20-097a-e4fd-67d5-fb2c42f0dd71@2ndquadrant.com>
The performance overhead of this can be significant on Windows, and most
people don't have the tools to view it anyway as Windows does not have
native support for process titles.
Discussion: <0A3221C70F24FB45833433255569204D1F5BE3E8@G01JPEXMBYT05>
Takayuki Tsunakawa
temp_file_limit is a per-process limit, not a per-session limit across
all cooperating parallel processes; change wording accordingly, per a
suggestion from Tom Lane.
Also, document under max_parallel_workers_per_gather the fact that each
process involved in a parallel query may use as many resources as a
separate session. Caveat emptor.
Per a complaint from Peter Geoghegan.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Discussion: CAD__OuhPmc6XH=wYRm_+Q657yQE88DakN4=Ybh2oveFasHkoeA@mail.gmail.com
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
This new limit affects both the max_parallel_degree GUC and the
parallel_degree reloption. There may some day be a use case for using
more than 1024 CPUs for a single query, but that's surely not the case
right now. Not only do not very many people have that many CPUs, but
the code hasn't been tested at that kind of scale and is very unlikely
to perform well, or even work at all, without a lot more work. The
issue addressed by commit 06bd458cb8 is
probably just one problem of many.
The idea of a more reasonable limit here was suggested by Tom Lane;
the value of 1024 was suggested by Amit Kapila.
Commit 989be0810d added a flex/bison lexer/parser to interpret
synchronous_standby_names. It was done in a pretty crufty way, though,
making assorted end-use sites responsible for calling the parser at the
right times. That was not only vulnerable to errors of omission, but made
it possible that lexer/parser errors occur at very undesirable times,
and created memory leakages even if there was no error.
Instead, perform the parsing once during check_synchronous_standby_names
and let guc.c manage the resulting data. To do that, we have to flatten
the parsed representation into a single hunk of malloc'd memory, but that
is not very hard.
While at it, work a little harder on making useful error reports for
parsing problems; the previous code felt that "synchronous_standby_names
parser returned 1" was an appropriate user-facing error message. (To
be fair, it did also log a syntax error message, but separately from the
GUC problem report, which is at best confusing.) It had some outright
bugs in the face of invalid input, too.
I (tgl) also concluded that we need to restrict unquoted names in
synchronous_standby_names to be just SQL identifiers. The previous coding
would accept darn near anything, which (1) makes the quoting convention
both nearly-unnecessary and formally ambiguous, (2) makes it very hard to
understand what is a syntax error and what is a creative interpretation of
the input as a standby name, and (3) makes it impossible to further extend
the syntax in future without a compatibility break. I presume that we're
intending future extensions of the syntax, else this parsing infrastructure
is massive overkill, so (3) is an important objection. Since we've taken
a compatibility hit for non-identifier names with this change anyway, we
might as well lock things down now and insist that users use double quotes
for standby names that aren't identifiers.
Kyotaro Horiguchi and Tom Lane
Change max_parallel_degree default from 0 to 2. It is possible that
this is not a good idea, or that we should go with 1 worker rather
than 2, but we won't find out without trying it. Along the way,
reword the documentation for max_parallel_degree a little bit to
hopefully make it more clear.
Discussion: 20160420174631.3qjjhpwsvvx5bau5@alap3.anarazel.de
Several issues:
1) checkpoint_flush_after doc and code disagreed about the default
2) new GUCs were missing from postgresql.conf.sample
3) Outdated source-code comment about bgwriter_flush_after's default
4) Sub-optimal categories assigned to new GUCs
5) Docs suggested backend_flush_after is PGC_SIGHUP, but it's PGC_USERSET.
6) Spell out int as integer in the docs, as done elsewhere
Reported-By: Magnus Hagander, Fujii Masao
Discussion: CAHGQGwETyTG5VYQQ5C_srwxWX7RXvFcD3dKROhvAWWhoSBdmZw@mail.gmail.com
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small. Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort. This tends to be faster except perhaps for very small
amounts of working memory.
Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
Previously synchronous replication offered only the ability to confirm
that all changes made by a transaction had been transferred to at most
one synchronous standby server.
This commit extends synchronous replication so that it supports multiple
synchronous standby servers. It enables users to consider one or more
standby servers as synchronous, and increase the level of transaction
durability by ensuring that transaction commits wait for replies from
all of those synchronous standbys.
Multiple synchronous standby servers are configured in
synchronous_standby_names which is extended to support new syntax of
'num_sync ( standby_name [ , ... ] )', where num_sync specifies
the number of synchronous standbys that transaction commits need to
wait for replies from and standby_name is the name of a standby
server.
The syntax of 'standby_name [ , ... ]' which was used in 9.5 or before
is also still supported. It's the same as new syntax with num_sync=1.
This commit doesn't include "quorum commit" feature which was discussed
in pgsql-hackers. Synchronous standbys are chosen based on their priorities.
synchronous_standby_names determines the priority of each standby for
being chosen as a synchronous standby. The standbys whose names appear
earlier in the list are given higher priority and will be considered as
synchronous. Other standby servers appearing later in this list
represent potential synchronous standbys.
The regression test for multiple synchronous standbys is not included
in this commit. It should come later.
Authors: Sawada Masahiko, Beena Emerson, Michael Paquier, Fujii Masao
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Robert Haas, Simon Riggs,
Amit Langote, Thomas Munro, Sameer Thakur, Suraj Kharage, Abhijit Menon-Sen,
Rajeev Rastogi
Many thanks to the various individuals who were involved in
discussing and developing this feature.
As noted by Julian Schauder in bug #14063, the configuration-file parser
doesn't support embedded newlines in string literals. While there might
someday be a good reason to remove that restriction, there doesn't seem
to be one right now. However, ALTER SYSTEM SET could accept strings
containing newlines, since many of the variable-specific value-checking
routines would just see a newline as whitespace. This led to writing a
postgresql.auto.conf file that was broken and had to be removed manually.
Pending a reason to work harder, just throw an error if someone tries this.
In passing, fix several places in the ALTER SYSTEM logic that failed to
provide an errcode() for an ereport(), and thus would falsely log the
failure as an internal XX000 error.
Back-patch to 9.4 where ALTER SYSTEM was introduced.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
Currently writes to the main data files of postgres all go through the
OS page cache. This means that some operating systems can end up
collecting a large number of dirty buffers in their respective page
caches. When these dirty buffers are flushed to storage rapidly, be it
because of fsync(), timeouts, or dirty ratios, latency for other reads
and writes can increase massively. This is the primary reason for
regular massive stalls observed in real world scenarios and artificial
benchmarks; on rotating disks stalls on the order of hundreds of seconds
have been observed.
On linux it is possible to control this by reducing the global dirty
limits significantly, reducing the above problem. But global
configuration is rather problematic because it'll affect other
applications; also PostgreSQL itself doesn't always generally want this
behavior, e.g. for temporary files it's undesirable.
Several operating systems allow some control over the kernel page
cache. Linux has sync_file_range(2), several posix systems have msync(2)
and posix_fadvise(2). sync_file_range(2) is preferable because it
requires no special setup, whereas msync() requires the to-be-flushed
range to be mmap'ed. For the purpose of flushing dirty data
posix_fadvise(2) is the worst alternative, as flushing dirty data is
just a side-effect of POSIX_FADV_DONTNEED, which also removes the pages
from the page cache. Thus the feature is enabled by default only on
linux, but can be enabled on all systems that have any of the above
APIs.
While desirable and likely possible this patch does not contain an
implementation for windows.
With the infrastructure added, writes made via checkpointer, bgwriter
and normal user backends can be flushed after a configurable number of
writes. Each of these sources of writes controlled by a separate GUC,
checkpointer_flush_after, bgwriter_flush_after and backend_flush_after
respectively; they're separate because the number of flushes that are
good are separate, and because the performance considerations of
controlled flushing for each of these are different.
A later patch will add checkpoint sorting - after that flushes from the
ckeckpoint will almost always be desirable. Bgwriter flushes are most of
the time going to be random, which are slow on lots of storage hardware.
Flushing in backends works well if the storage and bgwriter can keep up,
but if not it can have negative consequences. This patch is likely to
have negative performance consequences without checkpoint sorting, but
unfortunately so has sorting without flush control.
Discussion: alpine.DEB.2.10.1506011320000.28433@sto
Author: Fabien Coelho and Andres Freund
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
Future PL/Java versions will close CVE-2016-0766 by making these GUCs
PGC_SUSET. This PostgreSQL change independently mitigates that PL/Java
vulnerability, helping sites that update PostgreSQL more frequently than
PL/Java. Back-patch to 9.1 (all supported versions).
Previously, the first error seen would be that postgresql.conf does not
exist. But for the case where the whole directory does not exist, give
an error message about that, together with a hint for how to create one.
Per a report from Shay Rojansky, Npgsql sends ssl_renegotiation_limit=0
in the startup packet because it does not support renegotiation; other
clients which have not attempted to support renegotiation might well
behave similarly. The recent removal of this parameter forces them to
break compatibility with either current PostgreSQL versions, or
previous ones. Per discussion, the best solution is to accept the
parameter but only allow a value of 0.
Shay Rojansky, edited a little by me.
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
The old minimum values are rather large, making it time consuming to
test related behaviour. Additionally the current limits, especially for
multixacts, can be problematic in space-constrained systems. 10000000
multixacts can contain a lot of members.
Since there's no good reason for the current limits, lower them a good
bit. Setting them to 0 would be a bad idea, triggering endless vacuums,
so still retain a limit.
While at it fix autovacuum_multixact_freeze_max_age to refer to
multixact.c instead of varsup.c.
Reviewed-By: Robert Haas
Discussion: CA+TgmoYmQPHcrc3GSs7vwvrbTkbcGD9Gik=OztbDGGrovkkEzQ@mail.gmail.com
Backpatch: back to 9.0 (in parts)
Every query of a single ENABLE ROW SECURITY table has two meanings, with
the row_security GUC selecting between them. With row_security=force
available, every function author would have been advised to either set
the GUC locally or test both meanings. Non-compliance would have
threatened reliability and, for SECURITY DEFINER functions, security.
Authors already face an obligation to account for search_path, and we
should not mimic that example. With this change, only BYPASSRLS roles
need exercise the aforementioned care. Back-patch to 9.5, where the
row_security GUC was introduced.
Since this narrows the domain of pg_db_role_setting.setconfig and
pg_proc.proconfig, one might bump catversion. A row_security=force
setting in one of those columns will elicit a clear message, so don't.
Per discussion, nowadays it is possible to have tablespaces that have
wildly different I/O characteristics from others. Setting different
effective_io_concurrency parameters for those has been measured to
improve performance.
Author: Julien Rouhaud
Reviewed by: Andres Freund
It must be possible to multiply wal_buffers by XLOG_BLCKSZ without
overflowing int, or calculations in StartupXLOG will go badly wrong
and crash the server. Avoid that by imposing a maximum value on
wal_buffers. This will be just under 2GB, assuming the usual value
for XLOG_BLCKSZ.
Josh Berkus, per an analysis by Andrew Gierth.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
When enabling wal_compression, there is a risk to leak data similarly to
the BREACH and CRIME attacks on SSL where the compression ratio of
a full page image gives a hint of what is the existing data of this page.
This vulnerability is quite cumbersome to exploit in practice, but doable.
So this patch makes wal_compression PGC_SUSET in order to prevent
non-superusers from enabling it and exploiting the vulnerability while
DBA thinks the risk very seriously and disables it in postgresql.conf.
Back-patch to 9.5 where wal_compression was introduced.
This allows convenient checking for existence of a GUC from SQL, which is
particularly useful when dealing with custom variables.
David Christensen, reviewed by Jeevan Chalke
As first committed, this view reported on the file contents as they were
at the last SIGHUP event. That's not as useful as reporting on the current
contents, and what's more, it didn't work right on Windows unless the
current session had serviced at least one SIGHUP. Therefore, arrange to
re-read the files when pg_show_all_settings() is called. This requires
only minor refactoring so that we can pass changeVal = false to
set_config_option() so that it won't actually apply any changes locally.
In addition, add error reporting so that errors that would prevent the
configuration files from being loaded, or would prevent individual settings
from being applied, are visible directly in the view. This makes the view
usable for pre-testing whether edits made in the config files will have the
desired effect, before one actually issues a SIGHUP.
I also added an "applied" column so that it's easy to identify entries that
are superseded by later entries; this was the main use-case for the original
design, but it seemed unnecessarily hard to use for that.
Also fix a 9.4.1 regression that allowed multiple entries for a
PGC_POSTMASTER variable to cause bogus complaints in the postmaster log.
(The issue here was that commit bf007a27ac unintentionally reverted
3e3f65973a, which suppressed any duplicate entries within
ParseConfigFp. However, since the original coding of the pg_file_settings
view depended on such suppression *not* happening, we couldn't have fixed
this issue now without first doing something with pg_file_settings.
Now we suppress duplicates by marking them "ignored" within
ProcessConfigFileInternal, which doesn't hide them in the view.)
Lesser changes include:
Drive the view directly off the ConfigVariable list, instead of making a
basically-equivalent second copy of the data. There's no longer any need
to hang onto the data permanently, anyway.
Convert show_all_file_settings() to do its work in one call and return a
tuplestore; this avoids risks associated with assuming that the GUC state
will hold still over the course of query execution. (I think there were
probably latent bugs here, though you might need something like a cursor
on the view to expose them.)
Arrange to run SIGHUP processing in a short-lived memory context, to
forestall process-lifespan memory leaks. (There is one known leak in this
code, in ProcessConfigDirectory; it seems minor enough to not be worth
back-patching a specific fix for.)
Remove mistaken assignment to ConfigFileLineno that caused line counting
after an include_dir directive to be completely wrong.
Add missed failure check in AlterSystemSetConfigFile(). We don't really
expect ParseConfigFp() to fail, but that's not an excuse for not checking.
System catalogs and views should be listed alphabetically
in catalog.sgml, but only pg_file_settings view not.
This patch also fixes typos in pg_file_settings comments.
This undoes a poorly-thought-out choice in commit 970a18687f, namely
to export guc.c's internal variable data_directory. The authoritative
variable so far as C code is concerned is DataDir; there is no reason for
anything except specific bits of GUC code to look at the GUC variable.
After yesterday's commits fixing the fsync-on-restart patch, the only
remaining misuse of data_directory was in AlterSystemSetConfigFile(),
which would be much better off just using a relative path anyhow: it's
less code and it doesn't break if the DBA moves the data directory of a
running system, which is a case we've taken some pains over in the past.
This is mostly cosmetic, so no need for a back-patch (and I'd be hesitant
to remove a global variable in stable branches anyway).
The function and view added here provide a way to look at all settings
in postgresql.conf, any #include'd files, and postgresql.auto.conf
(which is what backs the ALTER SYSTEM command).
The information returned includes the configuration file name, line
number in that file, sequence number indicating when the parameter is
loaded (useful to see if it is later masked by another definition of the
same parameter), parameter name, and what it is set to at that point.
This information is updated on reload of the server.
This is unfiltered, privileged, information and therefore access is
restricted to superusers through the GRANT system.
Author: Sawada Masahiko, various improvements by me.
Reviewers: David Steele
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Replace the if-switch-case constructs with two conversion tables,
containing all the supported conversions between human-readable unit
strings and the base units used in GUC variables. This makes the code
easier to read, and makes adding new units simpler.
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Fix unsafe use of a non-volatile variable in PG_TRY/PG_CATCH in
AlterSystemSetConfigFile(). While at it, clean up a bundle of other
infelicities and outright bugs, including corner-case-incorrect linked list
manipulation, a poorly designed and worse documented parse-and-validate
function (which even included some randomly chosen hard-wired substitutes
for the specified elevel in one code path ... wtf?), direct use of open()
instead of fd.c's facilities, inadequate checking of write()'s return
value, and generally poorly written commentary.
This allows it to be used with ALTER ROLE SET.
Although the old setting of PGC_BACKEND prevented changes after session
start, after discussion it was more useful to allow ALTER ROLE SET
instead and just document that changes during a session have no effect.
This is similar to how session_preload_libraries works already.
An alternative would be to change things to allow PGC_BACKEND and
PGC_SU_BACKEND settings to be changed by ALTER ROLE SET. But that might
need further research (e.g., log_connections would probably not work).
based on patch by Kyotaro Horiguchi
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
In passing, add an Assert defending the presumption that bytes_left
is positive to start with. (I'm not exactly convinced that using an
unsigned type was such a bright thing here, but let's at least do
this much.)
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
Long ago we briefly had an "autocommit" GUC that turned server-side
autocommit on and off. That behavior was removed in 7.4 after concluding
that it broke far too much client-side logic, and making clients cope with
both behaviors was impractical. But the GUC variable was left behind, so
as not to break any client code that might be trying to read its value.
Enough time has now passed that we should remove the GUC completely.
Whatever vestigial backwards-compatibility benefit it had is outweighed by
the risk of confusion for newbies who assume it ought to do something,
as per a recent complaint from Wolfgang Wilhelm.
In passing, adjust what seemed to me a rather confusing documentation
reference to libpq's autocommit behavior. libpq as such knows nothing
about autocommit, so psql is probably what was meant.
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
While the space is optional, it seems nicer to be consistent with what
you get if you do "SET search_path=...". SET always normalizes the
separator to be comma+space.
Christoph Martin
When both postgresql.conf and postgresql.auto.conf have their own entry of
the same parameter, PostgreSQL uses the entry in postgresql.auto.conf because
it appears last in the configuration scan. IOW, the other entries which appear
earlier are ignored. But, previously, ProcessConfigFile() detected the invalid
settings of even those unused entries and emitted the error messages
complaining about them, at postmaster startup. Complaining about the entries
to ignore is basically useless.
This problem happened because ProcessConfigFile() was called twice at
postmaster startup and the first call read only postgresql.conf. That is, the
first call could check the entry which might be ignored eventually by
the second call which read both postgresql.conf and postgresql.auto.conf.
To work around the problem, this commit changes ProcessConfigFile so that
its first call processes only data_directory and the second one does all the
entries. It's OK to process data_directory in the first call because it's
ensured that data_directory doesn't exist in postgresql.auto.conf.
Back-patch to 9.4 where postgresql.auto.conf was added.
Patch by me. Review by Amit Kapila
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
pg_ctl will log to the Windows event log when it is running as a service,
which is the primary way of running PostgreSQL on Windows. This option
makes it possible to specify which event source to use for this, in order
to separate different instances. The server logging itself is still controlled
by the regular logging parameters, including a separate setting for the event
source. The parameter to pg_ctl only controlls the logging from pg_ctl itself.
MauMau, review in many iterations by Amit Kapila and me.
When running several postgres clusters on one OS instance it's often
inconveniently hard to identify which "postgres" process belongs to
which postgres instance.
Add the cluster_name GUC, whose value will be included as part of the
process titles if set. With that processes can more easily identified
using tools like 'ps'.
To avoid problems with encoding mismatches between postgresql.conf,
consoles, and individual databases replace non-ASCII chars in the name
with question marks. The length is limited to NAMEDATALEN to make it
less likely to truncate important information at the end of the
status.
Thomas Munro, with some adjustments by me and review by a host of people.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
data_directory could be set both in postgresql.conf and postgresql.auto.conf so far.
This could cause some problematic situations like circular definition. To avoid such
situations, this commit forbids a user to set data_directory in postgresql.auto.conf.
Backpatch this to 9.4 where ALTER SYSTEM command was introduced.
Amit Kapila, reviewed by Abhijit Menon-Sen, with minor adjustments by me.
The original coding for ALTER SYSTEM made a fundamentally bogus assumption
that postgresql.auto.conf could be sought relative to the main config file
if we hadn't yet determined the value of data_directory. This fails for
common arrangements with the config file elsewhere, as reported by
Christoph Berg.
The simplest fix is to not try to read postgresql.auto.conf until after
SelectConfigFiles has chosen (and locked down) the data_directory setting.
Because of the logic in ProcessConfigFile for handling resetting of GUCs
that've been removed from the config file, we cannot easily read the main
and auto config files separately; so this patch adopts a brute force
approach of reading the main config file twice during postmaster startup.
That's a tad ugly, but the actual time cost is likely to be negligible,
and there's no time for a more invasive redesign before beta.
With this patch, any attempt to set data_directory via ALTER SYSTEM
will be silently ignored. It would probably be better to throw an
error, but that can be dealt with later. This bug, however, would
prevent any testing of ALTER SYSTEM by a significant fraction of the
userbase, so it seems important to get it fixed before beta.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
EXEC_BACKEND builds (i.e., Windows) failed to absorb values of PGC_BACKEND
parameters if they'd been changed post-startup via the config file. This
for example prevented log_connections from working if it were turned on
post-startup. The mechanism for handling this case has always been a bit
of a kluge, and it wasn't revisited when we implemented EXEC_BACKEND.
While in a normal forking environment new backends will inherit the
postmaster's value of such settings, EXEC_BACKEND backends have to read
the settings from the CONFIG_EXEC_PARAMS file, and they were mistakenly
rejecting them. So this case has always been broken in the Windows port;
so back-patch to all supported branches.
Amit Kapila
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
- Write HIGH:MEDIUM instead of DEFAULT:!LOW:!EXP for clarity.
- Order 3DES last to work around inappropriate OpenSSL default.
- Remove !MD5 and @STRENGTH, because they are irrelevant.
- Add clarifying documentation.
Effectively, the new default is almost the same as the old one, but it
is arguably easier to understand and modify.
Author: Marko Kreen <markokr@gmail.com>
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
The temporary statistics files don't need to be included in the backup
because they are always reset at the beginning of the archive recovery.
This patch changes pg_basebackup so that it skips all files located in
$PGDATA/pg_stat_tmp or the directory specified by stats_temp_directory
parameter.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
This patch adds an option, huge_tlb_pages, which allows requesting the
shared memory segment to be allocated using huge pages, by using the
MAP_HUGETLB flag in mmap(). This can improve performance.
The default is 'try', which means that we will attempt using huge pages,
and fall back to non-huge pages if it doesn't work. Currently, only Linux
has MAP_HUGETLB. On other platforms, the default 'try' behaves the same as
'off'.
In the passing, don't try to round the mmap() size to a multiple of
pagesize. mmap() doesn't require that, and there's no particular reason for
PostgreSQL to do that either. When using MAP_HUGETLB, however, round the
request size up to nearest 2MB boundary. This is to work around a bug in
some Linux kernel versions, but also to avoid wasting memory, because the
kernel will round the size up anyway.
Many people were involved in writing this patch, including Christian Kruse,
Richard Poole, Abhijit Menon-Sen, reviewed by Peter Geoghegan, Andres Freund
and me.
Tom Lane
Alvaro Herrera
Michael Paquier
Tomas Vondra
Thomas Munro
Peter Eisentraut
Andres Freund
Andrew Dunstan
Andrew Gierth
Bruce Momjian
Peter Eisentraut
Stephen Frost
Alexander Korotkov
Heikki Linnakangas
Teodor Sigaev
Magnus Hagander
Robert Haas
Fujii Masao
Kevin Grittner
Simon Riggs
Noah Misch