In ancient times, these belonged to arguments or fields that were
actually of type long, but now they are not anymore, so this "L"
decoration is just confusing. (Some other 0L and other "L" constants
remain, where they are actually associated with a long type.)
When there are multiple publications for a subscription and one of those
publishes via the parent table by using publish_via_partition_root and the
other one directly publishes the child table, we end up copying the same
data twice during initial synchronization. The reason for this was that we
get both the parent and child tables from the publisher and try to copy
the data for both of them.
This patch extends the function pg_get_publication_tables() to take a
publication list as its input parameter. This allows us to exclude a
partition table whose ancestor is published by the same publication list.
This problem does exist in back-branches but we decide to fix it there in
a separate commit if required. The fix for back-branches requires quite
complicated changes to fetch the required table information from the
publisher as we can't update the function pg_get_publication_tables() in
back-branches. We are not sure whether we want to deviate and complicate
the code in back-branches for this problem as there are no field reports
yet.
Author: Wang wei
Reviewed-by: Peter Smith, Jacob Champion, Kuroda Hayato, Vignesh C, Osumi Takamichi, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
MERGE planning could fail with "variable not found in subplan target
list" if the target table is partitioned and all its partitions are
excluded at plan time, or in the case where it has no partitions but
used to have some. This happened because distribute_row_identity_vars
thought it didn't need to make the target table's reltarget list
fully valid; but if we generate a join plan then that is required
because the dummy Result node's tlist will be made from the reltarget.
The same logic appears in distribute_row_identity_vars in v14,
but AFAICS the problem is unreachable in that branch for lack of
MERGE. In other updating statements, the target table is always
inner-joined to any other tables, so if the target is known dummy
then the whole plan reduces to dummy, so no join nodes are created.
So I'll refrain from back-patching this code change to v14 for now.
Per report from Alvaro Herrera.
Discussion: https://postgr.es/m/20230328112248.6as34mlx5sr4kltg@alvherre.pgsql
To support older ICU versions, we rely on
icu_set_collation_attributes() to do error checking that is handled
directly by ucol_open() in newer ICU versions. Commit 3b50275b12
introduced a slight inconsistency, where the error report includes the
fixed-up locale string, rather than the locale string passed to
pg_ucol_open().
Refactor slightly so that pg_ucol_open() handles the errors from both
ucol_open() and icu_set_collation_attributes(), making it easier to
see any differences between the error reports. It also makes
pg_ucol_open() responsible for closing the UCollator on error, which
seems like the right place.
Discussion: https://postgr.es/m/04182066-7655-344a-b8b7-040b1b2490fb%40enterprisedb.com
Reviewed-by: Peter Eisentraut
Change the columns attndims, attstattarget, and attinhcount from int32
to int16, and reorder a bit. This saves some space (currently 4
bytes) in pg_attribute and tuple descriptors, which translates into
small performance benefits and/or room for new columns in pg_attribute
needed by future features.
attndims and attinhcount are never realistically used with values
larger than int16. Just to be sure, add some overflow checks.
attstattarget is currently limited explicitly to 10000.
For consistency, pg_constraint.coninhcount is also changed like
attinhcount.
Discussion: https://www.postgresql.org/message-id/flat/d07ffc2b-e0e8-77f7-38fb-be921dff71af%40enterprisedb.com
Two new macros are added with their respective functions switched to
use them. These are for functions with millisecond stats, with and
without "xact" in their names (for the stats that can be tracked within
a transaction).
While on it, prefix the macro for float8 on database entries with "_MS",
as it does a us->ms conversion, based on a suggestion from Andres
Freund.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/6e2efb4f-6fd0-807e-f6bf-94207db8183a@gmail.com
find_composite_type_dependencies() ignored indexes, which is a poor
decision because an expression index could have a stored column of
a composite (or other container) type even when the underlying table
does not. Teach it to detect such cases and error out. We have to
work a bit harder than for other relations because the pg_depend entry
won't identify the specific index column of concern, but it's not much
new code.
This does not address bug #17872's original complaint that dropping
a column in such a type might lead to violations of the uniqueness
property that a unique index is supposed to ensure. That seems of
much less concern to me because it won't lead to crashes.
Per bug #17872 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17872-d0fbb799dc3fd85d@postgresql.org
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
The nested-arrays code path in ExecEvalArrayExpr() used palloc to
allocate the result array, whereas every other array-creating function
has used palloc0 since 18c0b4ecc. This mostly works, but unused bits
past the end of the nulls bitmap may end up undefined. That causes
valgrind complaints with -DWRITE_READ_PARSE_PLAN_TREES, and could
cause planner misbehavior as cited in 18c0b4ecc. There seems no very
good reason why we should strive to avoid palloc0 in just this one case,
so fix it the easy way with s/palloc/palloc0/.
While looking at that I noted that we also failed to check for overflow
of "nbytes" and "nitems" while summing the sizes of the sub-arrays,
potentially allowing a crash due to undersized output allocation.
For "nbytes", follow the policy used by other array-munging code of
checking for overflow after each addition. (As elsewhere, the last
addition of the array's overhead space doesn't need an extra check,
since palloc itself will catch a value between 1Gb and 2Gb.)
For "nitems", there's no very good reason to sum the inputs at all,
since we can perfectly well use ArrayGetNItems' result instead of
ignoring it.
Per discussion of this bug, also remove redundant zeroing of the
nulls bitmap in array_set_element and array_set_slice.
Patch by Alexander Lakhin and myself, per bug #17858 from Alexander
Lakhin; thanks also to Richard Guo. These bugs are a dozen years old,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17858-8fd287fd3663d051@postgresql.org
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
The "partitions_total" and "partitions_done" fields were updated
as though the current level of partitioning was the only one.
In multi-level cases, not only could partitions_total change
over the course of the command, but partitions_done could go
backwards or exceed the currently-reported partitions_total.
Fix by setting partitions_total to the total number of direct
and indirect children once at command start, and then just
incrementing partitions_done at appropriate points. Invent
a new progress monitoring function "pgstat_progress_incr_param"
to simplify doing the latter. We can avoid adding cost for the
former when doing CREATE INDEX, because ProcessUtility already
enumerates the children and it's pretty easy to pass the count
down to DefineIndex. In principle the same could be done in
ALTER TABLE, but that's structurally difficult; for now, just
eat the cost of an extra find_all_inheritors scan in that case.
Ilya Gladyshev and Justin Pryzby
Discussion: https://postgr.es/m/a15f904a70924ffa4ca25c3c744cff31e0e6e143.camel@gmail.com
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
ICU versions 53 and earlier rely on icu_set_collation_attributes() to
process the attributes in the locale string. Avoid leaking the
already-opened UCollator object if an error is encountered.
Discussion: https://postgr.es/m/04182066-7655-344a-b8b7-040b1b2490fb%40enterprisedb.com
Reviewed-by: Peter Eisentraut
The fields of NLSVERSIONINFOEX are of type DWORD, which is unsigned
long, so the results of the computations being printed are also of
type unsigned long.
This commit renames the members of a few pgstat structures related to
functions and relations, by respectively removing their prefix "f_" and
"t_". The statistics for functions and relations and handled in their
own file, and pgstatfuncs.c associates each field in a structure
variable named based on the object type handled, so no information is
lost with this rename.
This will help with some of the refactoring aimed for pgstatfuncs.c, as
this makes more consistent the field names with the SQL functions
retrieving them.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Melanie Plageman
Discussion: https://postgr.es/m/9142f62a-a422-145c-bde0-b5bc498a4ada@gmail.com
Add pgstat counter to track row updates that result in the successor
version going to a new heap page, leaving behind an original version
whose t_ctid points to the new version. The current count is shown by
the n_tup_newpage_upd column of each of the pg_stat_*_tables views.
The new n_tup_newpage_upd column complements the existing n_tup_hot_upd
and n_tup_upd columns. Tables that have high n_tup_newpage_upd values
(relative to n_tup_upd) are good candidates for tuning heap fillfactor.
Corey Huinker, with small tweaks by me.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADkLM=ded21M9iZ36hHm-vj2rE2d=zcKpUQMds__Xm2pxLfHKA@mail.gmail.com
The "und" locale is an alternative spelling of the root locale, but it
was not recognized until ICU 55. To maintain common behavior across
all supported ICU versions, check for "und" and replace with "root"
before opening.
Previously, the lack of support for "und" was dangerous, because
versions 54 and older fall back to the environment when a locale is
not found. If the user specified "und" for the language (which is
expected and documented), it could not only resolve to the wrong
collator, but it could unexpectedly change (which could lead to
corrupt indexes).
This effectively reverts commit d72900bded, which worked around the
problem for the built-in "unicode" collation, and is no longer
necessary.
Discussion: https://postgr.es/m/60da0cecfb512a78b8666b31631a636215d8ce73.camel@j-davis.com
Discussion: https://postgr.es/m/0c6fa66f2753217d2a40480a96bd2ccf023536a1.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Hide details of supporting older ICU versions in a wrapper
function. The current code only needs to handle
icu_set_collation_attributes(), but a subsequent commit will add
additional version-specific code.
Discussion: https://postgr.es/m/7ee414ad-deb5-1144-8a0e-b34ae3b71cd5@enterprisedb.com
Reviewed-by: Peter Eisentraut
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having generated columns. We didn't use to ignore
generated columns while doing tuple comparison among the tuples from
the publisher and subscriber during apply of updates and deletes.
Author: Onder Kalaci
Reviewed-by: Shi yu, Amit Kapila
Backpatch-through: 12
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
This patch allows copying tables in the binary format during table
synchronization when the binary option for a subscription is enabled.
Previously, tables are copied in text format even if the subscription is
created with the binary option enabled. Copying tables in binary format
may reduce the time spent depending on column types.
A binary copy for initial table synchronization is supported only when
both publisher and subscriber are v16 or later.
Author: Melih Mutlu
Reviewed-by: Peter Smith, Shi yu, Euler Taveira, Vignesh C, Kuroda Hayato, Osumi Takamichi, Bharath Rupireddy, Hou Zhijie
Discussion: https://postgr.es/m/CAGPVpCQvAziCLknEnygY0v1-KBtg%2BOm-9JHJYZOnNPKFJPompw%40mail.gmail.com
* Commit 3048898e dropped -ING from PHJ wait event names. Update the
corresponding barrier phases names to match.
* Rename the "DONE" phases to "FREE". That's symmetrical with
"ALLOCATE", and names the activity that actually happens in that phase
(as we do for the other phases) rather than a state. The bug fixed by
commit 8d578b9b might have been more obvious with this name.
* Rename the batch/bucket growth barriers' "ALLOCATE" phases to
"REALLOCATE", a better description of what they do.
* Update the high level comments about phases to highlight phases
are executed by a single process with an asterisk (mostly memory
management phases).
No behavior change, as this is just improving internal identifiers. The
only user-visible sign of this is that a couple of wait events' display
names change from "...Allocate" to "...Reallocate" in pg_stat_activity,
to stay in sync with the internal names.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This patch eliminates step 2 by taking the lock during first
tuple_update()/tuple_delete() call. Heap table access method saves some
efforts by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
When we lock tuple using table_tuple_lock() then we at the same time fetch
the locked tuple to the slot. In this case we can skip extra
table_tuple_fetch_row_version() thank to we've already fetched the 'old' tuple
and nobody can change it concurrently since it's locked.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
RelationCopyStorageUsingBuffer() did not free the strategies used to access
the source / target relation. They memory was released at the end of the
transaction, but when using a template database with a lot of relations, the
temporary leak can become big prohibitively big.
RelationCopyStorageUsingBuffer() acquired the buffer for the target relation
with RBM_NORMAL, therefore requiring a read of a block guaranteed to be
zero. Use RBM_ZERO_AND_LOCK instead.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20230321070113.o2vqqxogjykwgfrr@awork3.anarazel.de
Backpatch: 15-, where STRATEGY WAL_LOG was introduced
The files generated by gen_node_support.pl for query jumbling
(queryjumblefuncs.funcs.c and queryjumblefuncs.switch.c) were not being
removed on make maintainer-clean (they need to remain around after a
simple "clean"). This commit makes the operation consistent with the
copy, equal, out and read files.
While on it, update a comment in the nodes'README where a reference to
queryjumblefuncs.funcs.c was missing.
Reported-by: Nathan Bossart
Reviewed-by: Richard Guo, Daniel Gustafsson
Discussion: https://postgr.es/m/ZBgAfTHcL6W7zGdW@paquier.xyz
As demonstrated by David Johnston, the Memoize cache hit ratio calculation
wasn't quite correct.
This change only affects the estimated hit ratio when the estimated number
of entries to cache is estimated not to fit inside the cache. For
example, if we expect 2000 distinct cache key values and only expect to be
able to cache 1000 of those at once due to memory constraints, with an
estimate of 10000 calls, if we could store all entries then the hit ratio
should be 80% to account for the first 2000 of the 10000 calls to be a
cache miss due to the value not being cached yet. If we can only store
1000 entries for each of the 2000 distinct possible values at once then
the 80% should be reduced by half to make the final estimate of 40%.
Previously, the calculation would have produced an estimated hit ratio of
30%, which wasn't correct.
Apply to master only so as not to destabilize plans in the back branches.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwZEmcNk3YQo2Xj4EDUOdY6qakad31rOD1Vc4q1_s68-Ew@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvrV44LwiF4W_qf_RpbGYWSgp1kF=cZr+kTRRaALUfmXqw@mail.gmail.com
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having dropped columns. We didn't use to ignore dropped
columns while doing tuple comparison among the tuples from the publisher
and subscriber during apply of updates and deletes.
Author: Onder Kalaci, Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
With unlucky timing and parallel_leader_participation=off (not the
default), PHJ could attempt to access per-batch shared state just as it
was being freed. There was code intended to prevent that by checking
for a cleared pointer, but it was racy. Fix, by introducing an extra
barrier phase. The new phase PHJ_BUILD_RUNNING means that it's safe to
access the per-batch state to find a batch to help with, and
PHJ_BUILD_DONE means that it is too late. The last to detach will free
the array of per-batch state as before, but now it will also atomically
advance the phase, so that late attachers can avoid the hazard. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
An earlier attempt to fix this (commit 3b8981b6, later reverted) missed
one special case. When the inner side is empty (the "empty inner
optimization), the build barrier would only make it to
PHJ_BUILD_HASHING_INNER phase before workers attempted to detach from
the hashtable. In that case, fast-forward the build barrier to
PHJ_BUILD_RUNNING before proceeding, so that our later assertions hold
and we can still negotiate who is cleaning up.
Revealed by build farm failures, where BarrierAttach() failed a sanity
check assertion, because the memory had been clobbered by dsa_free().
In non-assert builds, the result could be a segmentation fault.
Back-patch to all supported releases.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reported-by: David Geier <geidav.pg@gmail.com>
Tested-by: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
@extschema:name@ extends the existing @extschema@ feature so that
we can also insert the schema name of some required extension,
thus making cross-extension references robust even if they are in
different schemas.
However, this has the same hazard as @extschema@: if the schema
name is embedded literally in an installed object, rather than being
looked up once during extension script execution, then it's no longer
safe to relocate the other extension to another schema. To deal with
that without restricting things unnecessarily, add a "no_relocate"
option to extension control files. This allows an extension to
specify that it cannot handle relocation of some of its required
extensions, even if in themselves those extensions are relocatable.
We detect "no_relocate" requests of dependent extensions during
ALTER EXTENSION SET SCHEMA.
Regina Obe, reviewed by Sandro Santilli and myself
Discussion: https://postgr.es/m/003001d8f4ae$402282c0$c0678840$@pcorp.us
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
When calculating distance in brin_minmax_multi_distance_inet(), the
netmask was applied incorrectly. This results in (seemingly) incorrect
ordering of values, triggering an assert.
For builds without asserts this is mostly harmless - we may merge other
ranges, possibly resulting in slightly less efficient index. But it's
still correct and the greedy algorithm doesn't guarantee optimality
anyway.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported by Dmitry Dolgov, investigation and fix by me.
Reported-by: Dmitry Dolgov
Backpatch-through: 14
Discussion: https://postgr.es/m/17774-c6f3e36dd4471e67@postgresql.org
The Memoize executor node stores the cache key values along with the
tuple(s) which were found in the outer node which match each key value,
however, when the planner tried to estimate how many entries could be
stored in the cache, it didn't take into account that the cache key must
also be stored. In many cases, this won't make a large difference as the
key is likely small in comparison to the tuple(s) being stored, however,
it's not impossible to craft cases where the key could take more memory
than the tuple(s) stored for it.
Here we adjust the planner so it takes into account the estimated amount
of memory to store the cache key. Effectively, this change will reduce
the estimated cache hit ratio when it's thought that not all items will
fit in the cache, thus Memoize will become more expensive in such cases.
The executor already takes into account the memory consumed by the cache
key, so here we only need to adjust the planner.
Discussion: https://postgr.es/m/CAApHDvqGErGuyBfQvBQrTCHDbzLTqoiW=_G9sOzeFxWEc_7auA@mail.gmail.com
When probing the Memoize cache to check if the current cache key values
exist in the cache, we perform an evaluation of the expressions making up
the cache key before probing the hash table for those values. This
operation could leak memory as it is possible that the cache key is an
expression which requires allocation of memory, as was the case in bug
17844.
Here we fix this by correctly switching to the per tuple context before
evaluating the cache expressions so that the memory is freed next time the
per tuple context is reset.
Bug: 17844
Reported-by: Alexey Ermakov
Discussion: https://postgr.es/m/17844-d2f6f9e75a622bed@postgresql.org
Backpatch-through: 14, where Memoize was introduced
nodeRead() will have created a Node struct that's only allocated big
enough for the specific node type, so copying sizeof(union ValUnion)
can be copying too much. This provokes valgrind complaints, and with
very bad luck could perhaps result in SIGSEGV.
While at it, tidy up _equalA_Const to avoid duplicate checks of isnull.
Per report from Alexander Lakhin. This code is new as of a6bc33019,
so no need to back-patch.
Discussion: https://postgr.es/m/4995256b-cc65-170e-0b22-60ad2cd535f1@gmail.com
Add versions of timestamptz + interval, timestamptz - interval, and
generate_series(timestamptz, ...) in which a timezone can be specified
explicitly instead of defaulting to the TimeZone GUC setting.
The new functions for the first two are named date_add and
date_subtract. This might seem too generic, but we could use
overloading to add additional variants if that seems useful.
Along the way, improve the docs' pretty inadequate explanation
of how timestamptz +- interval works.
Przemysław Sztoch and Gurjeet Singh; cosmetic changes and most of
the docs work by me
Discussion: https://postgr.es/m/01a84551-48dd-1359-bf7e-f6b0203a6bd0@sztoch.pl
We already had five copies of essentially the same logic, and an
upcoming patch introduces yet another use-case. That's past my
threshold of pain, so introduce a common subroutine. There's not
that much net code savings, but the chance of typos should go down.
Inspired by a patch from Przemysław Sztoch, but different in detail.
Discussion: https://postgr.es/m/01a84551-48dd-1359-bf7e-f6b0203a6bd0@sztoch.pl
Check whether the datctype is C to determine whether t_isspace() and
related functions use isspace() or iswspace().
Previously, t_isspace() checked whether the database default collation
was C; which is incorrect when the default collation uses the ICU
provider.
Discussion: https://postgr.es/m/79e4354d9eccfdb00483146a6b9f6295202e7890.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Backpatch-through: 15
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
Currently, there are quite a few places in reorderbuffer.c that tries to
access top-transaction for a subtransaction. This makes the code to access
top-transaction consistent and easier to follow.
Author: Peter Smith
Reviewed-by: Vignesh C, Sawada Masahiko
Discussion: https://postgr.es/m/CAHut+PuCznOyTqBQwjRUu-ibG-=KHyCv-0FTcWQtZUdR88umfg@mail.gmail.com
The logic added in 9d9c02ccd to determine when a qual can be used as a
WindowClause run condition failed to correctly check for subqueries in the
qual. This was being done correctly for normal subquery qual pushdowns,
it's just that 9d9c02ccd failed to follow the lead on that.
This also fixes various other cases where transforming the qual into a
WindowClause run condition in the subquery should have been disallowed.
Bug: #17826
Reported-by: Anban Company
Discussion: https://postgr.es/m/17826-7d8750952f19a5f5@postgresql.org
Backpatch-through: 15, where 9d9c02ccd was introduced.
Further to commit 6a9229da, checking for NULL is now redundant. An "out
of memory" error would have been thrown already by palloc() and treated
as FATAL, so we can delete a few more lines.
Back-patch to all releases, like those other commits.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/4040668.1679013388%40sss.pgh.pa.us
create_append_path() would only apply get_baserel_parampathinfo
when the path is for a partitioned table, but it's also potentially
useful for paths for UNION ALL appendrels. Specifically, that
supports building a Memoize path atop this one.
While we're in the vicinity, delete some dead code in
create_merge_append_plan(): there's no need for it to support
parameterized MergeAppend paths, and it doesn't look like that
is going to change anytime soon. It'll be easy enough to undo
this when/if it becomes useful.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_ABSu4PWG2rE1q10tJugEXHWgru3U8dAgkoFvgrb6aEA@mail.gmail.com
gcc 12+ has complaints like the following:
../../../../../pgsql/src/backend/utils/adt/network.c: In function 'inetnot':
../../../../../pgsql/src/backend/utils/adt/network.c:1893:34: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
1893 | pdst[nb] = ~pip[nb];
| ~~~~~~~~~^~~~~~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
27 | unsigned char ipaddr[16]; /* up to 128 bits of address */
| ^~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
This is due to a compiler bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104986
It has been a year since the bug has been reported without getting fixed. As
the warnings are verbose and use of gcc 12 is becoming more common, it seems
worth working around the bug. Particularly because a simple reformulation of
the loop condition fixes the issue and isn't any less readable.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/144536.1648326206@sss.pgh.pa.us
Backpatch: 11-
A comment was left behind claiming that we needed to use malloc() rather
than palloc() because the corresponding free would run in another
thread, but that's not true anymore. Remove that comment. And, with
the reason being gone, we might as well actually use palloc().
Back-patch to supported releases, like d41a178b.
Discussion: https://postgr.es/m/CA%2BhUKG%2BpdM9v3Jv4tc2BFx2jh_daY3uzUyAGBhtDkotEQDNPYw%40mail.gmail.com
DecodeDateTime and DecodeTimeOnly had support for date input in the
style "Y2023M03D16", which the comments claimed to be an "ISO" format.
However, so far as I can find there is no such format in ISO 8601;
they write units before numbers in intervals, but not in datetimes.
Furthermore, the lesser-known ISO 8601-2 spec actually defines an
incompatible format "2023Y03M16D". None of our documentation mentions
such a format either. So let's just drop it.
That leaves us with only two cases for a prefix unit specifier in
datetimes: Julian dates written as Jnnnn, and the "T" separator
defined by ISO 8601. Add checks to catch misuse of these specifiers,
that is consecutive specifiers or a dangling specifier at the end of
the string. We do not however disallow a specifier that is separated
from the field that it disambiguates (by noise words or unrelated
fields). That being the case, remove some overly-aggressive error
checks from the ISOTIME cases.
Joseph Koshakow, editorialized a bit by me; thanks also to
Peter Eisentraut for some standards-reading.
Discussion: https://postgr.es/m/CAAvxfHf2Q1gKLiHGnuPOiyf0ASvKUM4BnMfsXuwgtYEb_Gx0Zw@mail.gmail.com
The user receiving the message might not understand where the
server's "current directory" is. "Data directory" seems clearer.
(This would not be good for frontend code, but both of these
messages are only issued in the backend.)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230316.111646.1564684434328830712.horikyota.ntt@gmail.com
This structure included only PgStat_FunctionCounts, and removing it
facilitates some upcoming refactoring for pgstatfuncs.c to use more
macros rather that mostly-duplicated functions.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/11d531fe-52fc-c6ea-7e8e-62f1b6ec626e@gmail.com
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
The hook can be installed by a shared_preload library.
A similar mechanism could be used for radius paswords, for example, and
the type name auth_password_hook_typ has been shosen with that in mind.
John Naylor and Andrew Dunstan
Discussion: https://postgr.es/m/469b06ed-69de-ba59-c13a-91d2372e52a9@dunslane.net
preprocess_targetlist thought PHVs couldn't appear here.
It was mistaken, as per report from Önder Kalacı.
Surveying other pull_var_clause calls, I noted no similar errors,
but I did notice that qual_is_pushdown_safe's assertion about
!contain_window_function was pointless, because the following
pull_var_clause call would complain about them anyway. In HEAD
only, remove the redundant Assert and improve the commentary.
Discussion: https://postgr.es/m/CACawEhUuum-gC_2S3sXLTcsk7bUSPSHOD+g1ZpfKaDK-KKPPWA@mail.gmail.com
Using REPLICA IDENTITY FULL on the publisher can lead to a full table scan
per tuple change on the subscription when REPLICA IDENTITY or PK index is
not available. This makes REPLICA IDENTITY FULL impractical to use apart
from some small number of use cases.
This patch allows using indexes other than PRIMARY KEY or REPLICA
IDENTITY on the subscriber during apply of update/delete. The index that
can be used must be a btree index, not a partial index, and it must have
at least one column reference (i.e. cannot consist of only expressions).
We can uplift these restrictions in the future. There is no smart
mechanism to pick the index. If there is more than one index that
satisfies these requirements, we just pick the first one. We discussed
using some of the optimizer's low-level APIs for this but ruled it out
as that can be a maintenance burden in the long run.
This patch improves the performance in the vast majority of cases and the
improvement is proportional to the amount of data in the table. However,
there could be some regression in a small number of cases where the indexes
have a lot of duplicate and dead rows. It was discussed that those are
mostly impractical cases but we can provide a table or subscription level
option to disable this feature if required.
Author: Onder Kalaci, Amit Kapila
Reviewed-by: Peter Smith, Shi yu, Hou Zhijie, Vignesh C, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/CACawEhVLqmAAyPXdHEPv1ssU2c=dqOniiGz7G73HfyS7+nGV4w@mail.gmail.com
Commit 4753ef37 changed vacuum_delay_point() to use the WaitLatch() API,
to fix the problem that vacuum could keep running for a very long time
after the postmaster died.
Unfortunately, that broke commit caf626b2's support for fractional
vacuum_cost_delay, which shipped in PostgreSQL 12. WaitLatch() works in
whole milliseconds.
For now, revert the change from commit 4753ef37, but add an explicit
check for postmaster death. That's an extra system call on systems
other than Linux and FreeBSD, but that overhead doesn't matter much
considering that we willingly went to sleep and woke up again. (In
later work, we might add higher resolution timeouts to the latch API so
that we could do this with our standard programming pattern, but that
wouldn't be back-patched.)
Back-patch to 14, where commit 4753ef37 arrived.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b-q0hXCBUCAATh0Z4Zi6UkiC0k2DFgoD3nC-r3SkR3tg%40mail.gmail.com
Our waitpid() emulation didn't prevent a PID from being recycled by the
OS before the call to waitpid(). The postmaster could finish up
tracking more than one child process with the same PID, and confuse
them.
Fix, by moving the guts of pgwin32_deadchild_callback() into waitpid(),
so that resources are released synchronously. The process and PID
continue to exist until we close the process handle, which only happens
once we're ready to adjust our book-keeping of running children.
This seems to explain a couple of failures on CI. It had never been
reported before, despite the code being as old as the Windows port.
Perhaps Windows started recycling PIDs more rapidly, or perhaps timing
changes due to commit 7389aad6 made it more likely to break.
Thanks to Alexander Lakhin for analysis and Andres Freund for tracking
down the root cause.
Back-patch to all supported branches.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230208012852.bvkn2am4h4iqjogq%40awork3.anarazel.de
The band-aid applied in commit f0bedf3e4 turns out to still need
some work: it made sure we didn't set Np->last_relevant too small
(to the left of the decimal point), but it didn't prevent setting
it too large (off the end of the partially-converted string).
This could result in fetching data beyond the end of the allocated
space, which with very bad luck could cause a SIGSEGV, though
I don't see any hazard of interesting memory disclosure.
Per bug #17839 from Thiago Nunes. The bug's pretty ancient,
so back-patch to all supported versions.
Discussion: https://postgr.es/m/17839-aada50db24d7b0da@postgresql.org
Scanning the expression for compatible Vars isn't really necessary,
because the subsequent match against StatisticExtInfo entries will
eliminate expressions containing other Vars just fine. Moreover,
this code hadn't stopped to think about what to do with
PlaceHolderVars or Aggrefs in the clause; and at least for the PHV
case, that demonstrably leads to failures. Rather than work out
whether it's reasonable to ignore those, let's just remove the
whole stanza.
Per report from Richard Guo. Back-patch to v14 where this code
was added.
Discussion: https://postgr.es/m/CAMbWs48Mmvm-acGevXuwpB=g5JMqVSL6i9z5UaJyLGJqa-XPAA@mail.gmail.com
Expose the standard error functions as SQL-callable functions. These
are expected to be useful to people working with normal distributions,
and we use them here to test the distribution from random_normal().
Since these functions are defined in the POSIX and C99 standards, they
should in theory be available on all supported platforms. If that
turns out not to be the case, more work will be needed.
On all platforms tested so far, using extra_float_digits = -1 in the
regression tests is sufficient to allow for variations between
implementations. However, past experience has shown that there are
almost certainly going to be additional unexpected portability issues,
so these tests may well need further adjustments, based on the
buildfarm results.
Dean Rasheed, reviewed by Nathan Bossart and Thomas Munro.
Discussion: https://postgr.es/m/CAEZATCXv5fi7+Vu-POiyai+ucF95+YMcCMafxV+eZuN1B-=MkQ@mail.gmail.com
The majority of error exit cases in json_lex_string() failed to
set lex->token_terminator, causing problems for the error context
reporting code: it would see token_terminator less than token_start
and do something more or less nuts. In v14 and up the end result
could be as bad as a crash in report_json_context(). Older
versions accidentally avoided that fate; but all versions produce
error context lines that are far less useful than intended,
because they'd stop at the end of the prior token instead of
continuing to where the actually-bad input is.
To fix, invent some macros that make it less notationally painful
to do the right thing. Also add documentation about what the
function is actually required to do; and in >= v14, add an assertion
in report_json_context about token_terminator being sufficiently
far advanced.
Per report from Nikolay Shaplov. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/7332649.x5DLKWyVIX@thinkpad-pgpro
check_agg_arguments_walker() supposed that it needn't descend into
the arguments of a lower-level aggregate function, but this is
just wrong in the presence of multiple levels of sub-select. The
oversight would lead to executor failures on queries that should
be rejected. (Prior to v11, they actually were rejected, thanks
to a "redundant" execution-time check.)
Per bug #17835 from Anban Company. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17835-4f29f3098b2d0ba4@postgresql.org
This allows for a string which if an input field matches causes the
column's default value to be inserted. The advantage of this is that
the default can be inserted in some rows and not others, for which
non-default data is available.
The file_fdw extension is also modified to take allow use of this
option.
Israel Barth Rubio
Discussion: https://postgr.es/m/CAO_rXXAcqesk6DsvioOZ5zmeEmpUN5ktZf-9=9yu+DTr0Xr8Uw@mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed in the case where UPDATEs or DELETEs are skipped
due to a BEFORE ROW trigger returning NULL (the INSERT case was
already handled correctly by ExecMergeNotMatched() calling
ExecInsert()).
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCU8XEmR0JWKDtyb7iZ%3DqCffxS9uyJt0iOZ4TV4RT%2Bow1w%40mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
adjust_appendrel_attrs can't transfer nullingrel labeling to a non-Var
translation expression (mainly because it's too late to wrap such an
expression in a PlaceHolderVar). I'd supposed in commit 2489d76c4
that that restriction was unreachable because we'd not attempt to push
problematic clauses down to an appendrel child relation. I forgot that
set_append_rel_size blindly converts all the parent rel's joininfo
clauses to child clauses, and that list could well contain clauses
from above a nulling outer join.
We might eventually have to devise a direct fix for this implementation
restriction, but for now it seems enough to filter out troublesome
clauses while constructing the child's joininfo list. Such clauses
are certainly not useful while constructing paths for the child rel;
they'll have to be applied later when we join the completed appendrel
to something else. So we don't need them here, and omitting them from
the list should save a few cycles while processing the child rel.
Per bug #17832 from Marko Tiikkaja.
Discussion: https://postgr.es/m/17832-d0a8106cdf1b722e@postgresql.org
The COPY documentation is quite clear that "COPY relation TO" copies
rows from only the named table, not any inheritance children it may
have. However, if you enabled row-level security on the table then
this stopped being true, because the code forgot to apply the ONLY
modifier in the "SELECT ... FROM relation" query that it constructs
in order to allow RLS predicates to be attached. Fix that.
Report and patch by Antonin Houska (comment adjustments and test case
by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/3472.1675251957@antos
Datetime input formerly accepted combinations such as
'1995-08-06 infinity', but this seems like a clear error.
Reject any combination of regular y/m/d/h/m/s fields with
these special tokens.
Joseph Koshakow, reviewed by Keisuke Kuroda and myself
Discussion: https://postgr.es/m/CAAvxfHdm8wwXwG_FFRaJ1nTHiMWb7YXS2YKCzCt8Q0a2ZoMcHg@mail.gmail.com
Commit bdaabb9b started skipping doomed transactions when building the
list of possible conflicts for SERIALIZABLE READ ONLY. That makes
sense, because doomed transactions won't commit, but a couple of subtle
things broke:
1. If all uncommitted r/w transactions are doomed, a READ ONLY
transaction would arbitrarily not benefit from the safe snapshot
optimization. It would not be taken immediately, and yet no other
transaction would set SXACT_FLAG_RO_SAFE later.
2. In the same circumstances but with DEFERRABLE, GetSafeSnapshot()
would correctly exit its wait loop without sleeping and then take the
optimization in non-assert builds, but assert builds would fail a sanity
check that SXACT_FLAG_RO_SAFE had been set by another transaction.
This is similar to the case for PredXact->WritableSxactCount == 0. We
should opt out immediately if our possibleUnsafeConflicts list is empty
after filtering.
The code to maintain the serializable global xmin is moved down below
the new opt out site, because otherwise we'd have to reverse its effects
before returning.
Back-patch to all supported releases. Bug #17368.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17116-d6ca217acc180e30%40postgresql.org
Discussion: https://postgr.es/m/20110707212159.GF76634%40csail.mit.edu
This exposes the ICU facility to add custom collation rules to a
standard collation.
New options are added to CREATE COLLATION, CREATE DATABASE, createdb,
and initdb to set the rules.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/flat/821c71a4-6ef0-d366-9acf-bb8e367f739f@enterprisedb.com
Reformat some of the comments in MergeAttributes(). A lot of code has
been added here over time, and the comments could use a bit of editing
to make the code flow read better.
When vacuum_defer_cleanup_age is bigger than the current xid, including the
epoch, the subtraction of vacuum_defer_cleanup_age would lead to a wrapped
around xid. While that normally is not a problem, the subsequent conversion to
a 64bit xid results in a 64bit-xid very far into the future. As that xid is
used as a horizon to detect whether rows versions are old enough to be
removed, that allows removal of rows that are still visible (i.e. corruption).
If vacuum_defer_cleanup_age was never changed from the default, there is no
chance of this bug occurring.
This bug was introduced in dc7420c2c9. A lesser version of it exists in
12-13, introduced by fb5344c969, affecting only GiST.
The 12-13 version of the issue can, in rare cases, lead to pages in a gist
index getting recycled too early, potentially causing index entries to be
found multiple times.
The fix is fairly simple - don't allow vacuum_defer_cleanup_age to retreat
further than FirstNormalTransactionId.
Patches to make similar bugs easier to find, by adding asserts to the 64bit
xid infrastructure, have been proposed, but are not suitable for backpatching.
Currently there are no tests for vacuum_defer_cleanup_age. A patch introducing
infrastructure to make writing a test easier has been posted to the list.
Reported-by: Michail Nikolaev <michail.nikolaev@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230108002923.cyoser3ttmt63bfn@awork3.anarazel.de
Backpatch: 12-, but impact/fix is smaller for 12-13
4211fbd has been handling PROCESS_MAIN in vacuum_rel() with an "if/else
if" structure to avoid an extra level of indentation, but this has been
found as being rather parse to read. This commit updates the code so as
we check for PROCESS_MAIN in a single place and then handle its
subpaths, FULL or non-FULL vacuums. Some comments are added to make
that clearer for the reader.
Reported-by: Melanie Plageman
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Melanie Plageman
Discussion: https://postgr.es/m/20230306194009.5cn6sp3wjotd36nu@liskov
If a view is defined atop another view, and then CREATE OR REPLACE
VIEW is used to add columns to the lower view, then when the upper
view's referencing RTE is expanded by ApplyRetrieveRule we will have
a subquery RTE with fewer eref->colnames than output columns. This
confuses various code that assumes those lists are always in sync,
as they are in plain parser output.
We have seen such problems before (cf commit d5b760ecb), and now
I think the time has come to do what was speculated about in that
commit: let's make ApplyRetrieveRule synthesize some column names to
preserve the invariant that holds in parser output. Otherwise we'll
be chasing this class of bugs indefinitely. Moreover, it appears from
testing that this actually gives us better results in the test case
d5b760ecb added, and likely in other corner cases that we lack
coverage for.
In HEAD, I replaced d5b760ecb's hack to make expandRTE exit early with
an elog(ERROR) call, since the case is now presumably unreachable.
But it seems like changing that in back branches would bring more risk
than benefit, so there I just updated the comment.
Per bug #17811 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17811-d31686b78f0dffc9@postgresql.org
This routine is able to retrieve the OID of the schema used with an
extension (pg_extension.extnamespace), or InvalidOid if this information
is not available. plpgsql_check embeds a copy of this code when
performing checks on functions, as one out-of-core example.
Author: Pavel Stehule
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAFj8pRD+9x55hjDoi285jCcjPc8uuY_D+FLn5RpXggdz+4O2sQ@mail.gmail.com
If UPDATE is forced to retry after an EvalPlanQual check, it neglected
to repeat GENERATED-column computations, even though those might well
have changed since we're dealing with a different tuple than before.
Fixing this is mostly a matter of looping back a bit further when
we retry. In v15 and HEAD that's most easily done by altering the API
of ExecUpdateAct so that it includes computing GENERATED expressions.
Also, if an UPDATE in a partitioned table turns into a cross-partition
INSERT operation, we failed to recompute GENERATED columns. That's a
bug since 8bf6ec3ba allowed partitions to have different generation
expressions; although it seems to have no ill effects before that.
Fixing this is messier because we can now have situations where the same
query needs both the UPDATE-aligned set of GENERATED columns and the
INSERT-aligned set, and it's unclear which set will be generated first
(else we could hack things by forcing the INSERT-aligned set to be
generated, which is indeed how fe9e658f4 made it work for MERGE).
The best fix seems to be to build and store separate sets of expressions
for the INSERT and UPDATE cases. That would create ABI issues in the
back branches, but so far it seems we can leave this alone in the back
branches.
Per bug #17823 from Hisahiro Kauchi. The first part of this affects all
branches back to v12 where GENERATED columns were added.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
While testing a fix for bug #17823, I discovered that EvalPlanQualStart
failed to copy es_rteperminfos from the parent EState, resulting in
failure if anything in EPQ execution wanted to consult that information.
This led me to conclude that commit a61b1f748 had been too haphazard
about where to fill es_rteperminfos, and that we need to be sure that
that happens exactly where es_range_table gets filled. So I changed the
signature of ExecInitRangeTable to help ensure that this new requirement
doesn't get missed. (Indeed, pgoutput.c was also failing to fill it.
Maybe we don't ever need it there, but I wouldn't bet on that.)
No test case yet; one will arrive with the fix for #17823.
But that needs to be back-patched, while this fix is HEAD-only.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
The functions that follow are concerned with various things, of
which the tar format is only one, so this comment doesn't really
seem helpful. The file isn't really divided into sections in the
way that this comment seems to contemplate -- or at least, not
any more.
Patch by me, reviewed by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoZ_fFAoU6mrHt9QBs+dcYhN6yXenGTTMRebZNhtwPwHyg@mail.gmail.com
We read blocks of data from files that we're backing up in chunks,
some multiple of BLCKSZ for each read. If checksum verification fails,
we then try rereading just the one block for which validation failed.
If that block happened to be the first block of the chunk, and if
the file was concurrently truncated to remove that block, then we'd
reach a call to bbsink_archive_contents() with a buffer length of 0.
That causes an assertion failure.
As far as I can see, there are no particularly bad consequences if
this happens in a non-assert build, and it's pretty unlikely to happen
in the first place because it requires a series of somewhat unlikely
things to happen in very quick succession. However, assertion failures
are bad, so rearrange the code to avoid that possibility.
Patch by me, reviewed by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoZ_fFAoU6mrHt9QBs+dcYhN6yXenGTTMRebZNhtwPwHyg@mail.gmail.com
Disabling this option is useful to run VACUUM (with or without FULL) on
only the toast table of a relation, bypassing the main relation. This
option is enabled by default.
Running directly VACUUM on a toast table was already possible without
this feature, by using the non-deterministic name of a toast relation
(as of pg_toast.pg_toast_N, where N would be the OID of the parent
relation) in the VACUUM command, and it required a scan of pg_class to
know the name of the toast table. So this feature is basically a
shortcut to be able to run VACUUM or VACUUM FULL on a toast relation,
using only the name of the parent relation.
A new switch called --no-process-main is added to vacuumdb, to work as
an equivalent of PROCESS_MAIN.
Regression tests are added to cover VACUUM and VACUUM FULL, looking at
pg_stat_all_tables.vacuum_count to see how many vacuums have run on
each table, main or toast.
Author: Nathan Bossart
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/20221230000028.GA435655@nathanxps13
The following changes are made to pg_write_zeros(), the API able to
write series of zeros using vectored I/O:
- Add of an "offset" parameter, to write the size from this position
(the 'p' of "pwrite" seems to mean position, though POSIX does not
outline ythat directly), hence the name of the routine is incorrect if
it is not able to handle offsets.
- Avoid memset() of "zbuffer" on every call.
- Avoid initialization of the whole IOV array if not needed.
- Group the trailing write() call with the main write() call,
simplifying the function logic.
Author: Andres Freund
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/20230215005525.mrrlmqrxzjzhaipl@awork3.anarazel.de
1. Make sure that we don't decrement SxactGlobalXminCount twice when
the SXACT_FLAG_RO_SAFE optimization is reached in a parallel query.
This could trigger a sanity check failure in assert builds. Non-assert
builds recompute the count in SetNewSxactGlobalXmin(), so the problem
was hidden, explaining the lack of field reports. Add a new isolation
test to exercise that case.
2. Remove an assertion that the DOOMED flag can't be set on a partially
released SERIALIZABLEXACT. Instead, ignore the flag (our transaction
was already determined to be read-only safe, and DOOMED is in fact set
during partial release, and there was already an assertion that it
wasn't set sooner). Improve an existing isolation test so that it
reaches that case (previously it wasn't quite testing what it was
supposed to be testing; see discussion).
Back-patch to 12. Bug #17116. Defects in commit 47a338cf.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17116-d6ca217acc180e30%40postgresql.org
Add support for non-decimal integer literals and underscores in
numeric literals to SQL JSON path language. This follows the rules of
ECMAScript, as referred to by the SQL standard.
Internally, all the numeric literal parsing of jsonpath goes through
numeric_in, which already supports all this, so this patch is just a
bit of lexer work and some tests and documentation.
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b11b25bb-6ec1-d42f-cedd-311eae59e1fb@enterprisedb.com
Beginning in v15, if you apply ALTER TABLE ENABLE/DISABLE TRIGGER to
a partitioned table, it also affects the partitions' cloned versions
of the affected trigger(s). The initial implementation of this
located the clones by name, but that fails on foreign-key triggers
which have names incorporating their own OIDs. We can fix that, and
also make the behavior more bulletproof in the face of user-initiated
trigger renames, by identifying the cloned triggers by tgparentid.
Following the lead of earlier commits in this area, I took care not
to break ABI in the v15 branch, even though I rather doubt there
are any external callers of EnableDisableTrigger.
While here, update the documentation, which was not touched when
the semantics were changed.
Per bug #17817 from Alan Hodgson. Back-patch to v15; older versions
do not have this behavior.
Discussion: https://postgr.es/m/17817-31dfb7c2100d9f3d@postgresql.org
Previously, meson installed modules under src/test/modules/ as part of
a normal installation, even though these files are only meant for use
by tests. This is because there is no way to set up up the build
system to install extra things only when told.
This patch fixes that with a workaround: We don't install these
modules as part of meson install, but we create a new "test" that runs
before the real tests whose action it is to install these files. The
installation is done by manual copies using a small helper script.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2a039e8e-f31f-31e8-afe7-bab3130ad2de%40enterprisedb.com
Open long-lived data and WAL file descriptors with O_CLOEXEC. This flag
was introduced by SUSv4 (POSIX.1-2008), and by now all of our target
Unix systems have it. Our open() implementation for Windows already had
that behavior, so provide a dummy O_CLOEXEC flag on that platform.
For now, callers of open() and the "thin" wrappers in fd.c that deal in
raw descriptors need to pass in O_CLOEXEC explicitly if desired. This
commit does that for WAL files, and automatically for everything
accessed via VFDs including SMgrRelation and BufFile. (With more
discussion we might decide to turn it on automatically for the thin
open()-wrappers too to avoid risk of missing places that need it, but
these are typically used for short-lived descriptors where we don't
expect to fork/exec, and it's remotely possible that extensions could be
using these APIs and passing descriptors to subprograms deliberately, so
that hasn't been done here.)
Do the same for sockets and the postmaster pipe with FD_CLOEXEC. (Later
commits might use modern interfaces to remove these extra fcntl() calls
and more where possible, but we'll need them as a fallback for a couple
of systems, so do it that way in this initial commit.)
With this change, subprograms executed for archiving, copying etc will
no longer have access to the server's descriptors, other than the ones
that we decide to pass down.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
When I designed the Bitmapset module, I set things up so that an empty
Bitmapset could be represented either by a NULL pointer, or by an
allocated object all of whose bits are zero. I've recently come to
the conclusion that that was a bad idea and we should instead have a
convention like the longstanding invariant for Lists, whereby an empty
list is represented by NIL and nothing else.
To do this, we need to fix bms_intersect, bms_difference, and a couple
of other functions to check for having produced an empty result; but
then we can replace bms_is_empty(a) by a simple "a == NULL" test.
This is very likely a (marginal) win performance-wise, because we
call bms_is_empty many more times than those other functions put
together. However, the real reason to do it is that we have various
places that have hand-implemented a rule about "this Bitmapset
variable must be exactly NULL if empty", so that they can use
checks-for-null in place of bms_is_empty calls in particularly hot
code paths. That is a really fragile, mistake-prone way to do things,
and I'm surprised that we've seldom been bitten by it. It's not well
documented at all which variables have this property, so you can't
readily tell which code might be violating those conventions. By
making the convention universal, we can eliminate a subtle source of
bugs.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
nodeAppend.c used non-nullness of appendstate->as_valid_subplans as
a state flag to indicate whether it'd done ExecFindMatchingSubPlans
(or some sufficient approximation to that). This was pretty
questionable even in the beginning, since it wouldn't really work
right if there are no valid subplans. It got more questionable
after commit 27e1f1456 added logic that could reduce as_valid_subplans
to an empty set: at that point we were depending on unspecified
behavior of bms_del_members, namely that it'd not return an empty
set as NULL. It's about to start doing that, which breaks this
logic entirely. Hence, add a separate boolean flag to signal
whether as_valid_subplans has been computed.
Also fix a previously-cosmetic bug in nodeAgg.c, wherein it ignored
the return value of bms_del_member instead of updating its pointer.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
This function has been semi-deprecated ever since we invented
bms_next_member(). Its habit of scribbling on the input bitmapset
isn't great, plus for sufficiently large bitmapsets it would take
O(N^2) time to complete a loop. Now we have the additional problem
that reducing the input to empty while leaving it still accessible
would violate a planned invariant. So let's just get rid of it,
after updating the few extant callers to use bms_next_member().
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
Some deprecated options were not marked as such in usage output. This
does so across the installed binaries in an attempt to provide consistent
markup for this.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/062C6A8A-A4E8-4F52-9E31-45F0C9E9915E@yesql.se
Commit 0a20ff54f split out the GUC variables from guc.c into a new file
guc_tables.c. This updates comments referencing guc.c regarding variables
which are now in guc_tables.c.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6B50C70C-8C1F-4F9A-A7C0-EEAFCC032406@yesql.se
When you have some invalid WAL, you often get a message like "wanted
24, got 0". This is a bit incorrect, since it really wanted *at
least* 24, not exactly 24. This updates the messages to that effect,
and also adds that detail to one message where it was available but
not printed.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Jeevan Ladhe <jeevanladhe.os@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/726d782b-5e45-0c3e-d775-6686afe9aa83%40enterprisedb.com
This is usually harmless, but if you were very unlucky it could
provoke a segfault due to the "to" string being right up against
the end of memory. Found via valgrind testing (so we might've
found it earlier, except that our regression tests lacked any
exercise of translate()'s deletion feature).
Fix by switching the order of the test-for-end-of-string and
advance-pointer steps. While here, compute "to_ptr + tolen"
just once. (Smarter compilers might figure that out for
themselves, but let's just make sure.)
Report and fix by Daniil Anisimov, in bug #17816.
Discussion: https://postgr.es/m/17816-70f3d2764e88a108@postgresql.org
pg_input_error_info() is now a SQL function able to return a row with
more than just the error message generated for incorrect data type
inputs when these are able to handle soft failures, returning more
contents of ErrorData, as of:
- The error message (same as before).
- The error detail, if set.
- The error hint, if set.
- SQL error code.
All the regression tests that relied on pg_input_error_message() are
updated to reflect the effects of the rename.
Per discussion with Tom Lane and Andrew Dunstan.
Author: Nathan Bossart
Discussion: https://postgr.es/m/139a68e1-bd1f-a9a7-b5fe-0be9845c6311@dunslane.net
Some clang versions whine about comparing an enum variable to
a value outside the range of the enum, on the grounds that the
result must be constant. In the cases we fix here, the loops
will terminate only if the enum variable can in fact hold a
value one beyond its declared range. While that's very likely
to always be true for these enum types, it still seems like a
poor coding practice to assume it; so use "int" loop variables
instead to silence the warnings. (This matches what we've done
in other places, for example loops over the range of ForkNumber.)
While at it, let's drop the XXX_FIRST macros for these enums and just
write zeroes for the loop start values. The apparent flexibility
seems rather illusory given that iterating up to one-less-than-
the-number-of-values is only correct for a zero-based range.
Melanie Plageman
Discussion: https://postgr.es/m/20520.1677435600@sss.pgh.pa.us
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
If a rule action contains a subquery that refers to columns from OLD
or NEW, then those are really lateral references, and the planner will
complain if it sees such things in a subquery that isn't marked as
lateral. However, at rule-definition time, the user isn't required to
mark the subquery with LATERAL, and so it can fail when the rule is
used.
Fix this by marking such subqueries as lateral in the rewriter, at the
point where they're used.
Dean Rasheed and Tom Lane, per report from Alexander Lakhin.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/5e09da43-aaba-7ea7-0a51-a2eb981b058b%40gmail.com
A unique index which is created with non-distinct NULLS cannot be
used for backing a primary key constraint. Make sure to disallow
such table alterations and teach pg_dump to drop the non-distinct
NULLS clause on indexes where this has been set.
Bug: 17720
Reported-by: Reiner Peterke <zedaardv@drizzle.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17720-dab8ee0fa85d316d@postgresql.org
Multiple cycles of starting up and shutting down the plugin within a
single session would eventually lead to "out of relcache_callback_list
slots", because pgoutput_startup blindly re-registered its cache
callbacks each time. Fix it to register them only once, as all other
users of cache callbacks already take care to do.
This has been broken all along, so back-patch to all supported branches.
Shi Yu
Discussion: https://postgr.es/m/OSZPR01MB631004A78D743D68921FFAD3FDA79@OSZPR01MB6310.jpnprd01.prod.outlook.com
Offers a generally better separation of responsibilities for collation
code. Also, a step towards multi-lib ICU, which should be based on a
clean separation of the routines required for collation providers.
Callers with NUL-terminated strings should call pg_strcoll() or
pg_strxfrm(); callers with strings and their length should call the
variants pg_strncoll() or pg_strnxfrm().
Reviewed-by: Peter Eisentraut, Peter Geoghegan
Discussion: https://postgr.es/m/a581136455c940d7bd0ff482d3a2bd51af25a94f.camel%40j-davis.com
It's possible, in admittedly-rather-contrived cases, for an eclass
to generate a derived "join" qual that constrains the post-outer-join
value(s) of some RHS variable(s) without mentioning the LHS at all.
While the mechanisms were set up to work for this, we fell foul of
the "get_common_eclass_indexes" filter installed by commit 3373c7155:
it could decide that such an eclass wasn't relevant to the join, so
that the required qual clause wouldn't get emitted there or anywhere
else.
To fix, apply get_common_eclass_indexes only at inner joins, where
its rule is still valid. At an outer join, fall back to examining all
eclasses that mention either input (or the OJ relid, though it should
be impossible for an eclass to mention that without mentioning either
input). Perhaps we can improve on that later, but the cost/benefit of
adding more complexity to skip some irrelevant eclasses is dubious.
To allow cheaply distinguishing outer from inner joins, pass the
ojrelid to generate_join_implied_equalities as a separate argument.
This also allows cleaning up some sloppiness that had crept into
the definition of its join_relids argument, and it allows accurate
calculation of nominal_join_relids for a child outer join. (The
latter oversight seems not to have been a live bug, but it certainly
could have caused problems in future.)
Also fix what might be a live bug in check_index_predicates: it was
being sloppy about what it passed to generate_join_implied_equalities.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-DsTBfOvXuw64GdFss2=M5cwtEhY=0DCS7t2gT7P6hSA@mail.gmail.com
Given an updatable view with a DO ALSO INSERT ... SELECT rule, a
multi-row INSERT ... VALUES query on the view fails if the VALUES list
contains any DEFAULTs that are not replaced by view defaults. This
manifests as an "unrecognized node type" error, or an Assert failure,
in an assert-enabled build.
The reason is that when RewriteQuery() attempts to replace the
remaining DEFAULT items with NULLs in any product queries, using
rewriteValuesRTEToNulls(), it assumes that the VALUES RTE is located
at the same rangetable index in each product query. However, if the
product query is an INSERT ... SELECT, then the VALUES RTE is actually
in the SELECT part of that query (at the same index), rather than the
top-level product query itself.
Fix, by descending to the SELECT in such cases. Note that we can't
simply use getInsertSelectQuery() for this, since that expects to be
given a raw rule action with OLD and NEW placeholder entries, so we
duplicate its logic instead.
While at it, beef up the checks in getInsertSelectQuery() by checking
that the jointree->fromlist node is indeed a RangeTblRef, and that the
RTE it points to has rtekind == RTE_SUBQUERY.
Per bug #17803, from Alexander Lakhin. Back-patch to all supported
branches.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/17803-53c63ed4ecb4eac6%40postgresql.org
initsplan.c figured that it could push Var-free qual clauses to
the top of the current JoinDomain, which is okay in the abstract.
But if the current domain is inside some outer join, and we later
commute an inside-the-domain outer join with one outside it,
we end up placing the pushed-up qual clause incorrectly.
In distribute_qual_to_rels, avoid this by using the syntactic scope
of the qual clause; with the exception that if we're in the top-level
join domain we can still use the full query relid set, ensuring the
resulting gating Result node goes to the top of the plan. (This is
approximately as smart as the pre-v16 code was. Perhaps we can do
better later, but it's not clear that such cases are worth a lot of
sweat.)
In process_implied_equality, we don't have a clear notion of syntactic
scope, but we do have the results of SpecialJoinInfo construction.
Thumb through those and remove any lower outer joins that might get
commuted to above the join domain. Again, we can make an exception
for the top-level join domain. It'd be possible to work harder here
(for example, by keeping outer joins that aren't shown as potentially
commutable), but I'm going to stop here for the moment. This issue
has convinced me that the current representation of join domains
probably needs further refinement, so I'm disinclined to write
inessential dependent logic just yet.
In passing, tighten the qualscope passed to process_implied_equality
by generate_base_implied_equalities_no_const; there's no need for
it to be larger than the rel we are currently considering.
Tom Lane and Richard Guo, per report from Tender Wang.
Discussion: https://postgr.es/m/CAHewXNk9eJ35ru5xATWioTV4+xZPHptjy9etdcNPjUfY9RQ+uQ@mail.gmail.com
Whe decoding a transactional logical message, logicalmsg_decode called
SnapBuildGetOrBuildSnapshot. But we may not have a consistent snapshot
yet at that point. We don't actually need the snapshot in this case
(during replay we'll have the snapshot from the transaction), so in
practice this is harmless. But in assert-enabled build this crashes.
Fixed by requesting the snapshot only in non-transactional case, where
we are guaranteed to have SNAPBUILD_CONSISTENT.
Backpatch to 11. The issue exists since 9.6.
Backpatch-through: 11
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/84d60912-6eab-9b84-5de3-41765a5449e8@enterprisedb.com
In ExecInitPartitionInfo(), the Assert when building the WITH CHECK
OPTION list for the new partition assumed that the command would be an
INSERT or UPDATE, but it can also be a MERGE. This can be triggered by
a MERGE into a partitioned table with RLS checks to enforce.
Fix, and back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWWFtQmW67F3XTyMU5Am10Oxa_b8oe0x%2BNu5Mo%2BCdRErg%40mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed. Previously, if MERGE updated a partitioned table,
the row count would be incorrect if any row was moved to a different
partition, since such updates were counted twice.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWRMG7XX2QEsVL1LswmNo2d_YG8tKTLkpD3=Lp644S7rg@mail.gmail.com
SQL:2023 defines an ANY_VALUE aggregate whose purpose is to emit an
implementation-dependent (i.e. non-deterministic) value from the
aggregated rows.
Author: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5cff866c-10a8-d2df-32cb-e9072e6b04a2@postgresfriends.org
WAL_LOG does a scan of the template's pg_class to determine the set of
relations that need to be copied from a template database to the new
one. However, as coded in 9c08aea, this copy strategy would load the
pages of pg_class without considering it as a permanent relation,
causing the loaded pages to never be flushed when they should. Any
modification of the template's pg_class, mostly through DDLs, would then
be missed, causing corruptions.
STRATEGY = WAL_LOG is the default over FILE_COPY since it has been
introduced, so any changes done to pg_class on a database template would
be gone. Updates of database templates should be a rare thing, so the
impact of this bug should be hopefully limited. The pre-14 default
strategy FILE_COPY is safe, and can be used as a workaround.
Ryo Matsumura has found and analyzed the issue, and Nathan has written a
test able to reproduce the failure (with few tweaks from me).
Backpatch down to 15, where STRATEGY = WAL_LOG has been introduced.
Author: Nathan Bossart, Ryo Matsumura
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/TYCPR01MB6868677E499C9AD5123084B5E8A39@TYCPR01MB6868.jpnprd01.prod.outlook.com
Backpatch-through: 15
If asked to decrease the size of a large (>8K) palloc chunk,
AllocSetRealloc could improperly change the Valgrind state of memory
beyond the new end of the chunk: it would mark data UNDEFINED as far
as the old end of the chunk after having done the realloc(3) call,
thus tromping on the state of memory that no longer belongs to it.
One would normally expect that memory to now be marked NOACCESS,
so that this mislabeling might prevent detection of later errors.
If realloc() had chosen to move the chunk someplace else (unlikely,
but well within its rights) we could also mismark perfectly-valid
DEFINED data as UNDEFINED, causing false-positive valgrind reports
later. Also, any malloc bookkeeping data placed within this area
might now be wrongly marked, causing additional problems.
Fix by replacing relevant uses of "oldsize" with "Min(size, oldsize)".
It's sufficient to mark as far as "size" when that's smaller, because
whatever remains in the new chunk size will be marked NOACCESS below,
and we expect realloc() to have taken care of marking the memory
beyond the new official end of the chunk.
While we're here, also rename the function's "oldsize" variable
to "oldchksize" to more clearly explain what it actually holds,
namely the distance to the end of the chunk (that is, requested size
plus trailing padding). This is more consistent with the use of
"size" and "chksize" to hold the new requested size and chunk size.
Add a new variable "oldsize" in the one stanza where we're actually
talking about the old requested size.
Oversight in commit c477f3e44. Back-patch to all supported branches,
as that was, just in case anybody wants to do valgrind testing on back
branches.
Karina Litskevich
Discussion: https://postgr.es/m/CACiT8iaAET-fmzjjZLjaJC4zwSJmrFyL7LAdHwaYyjjQOQ4hcg@mail.gmail.com
Commits 04cad8f7 and 0c088568 supported old macOS systems that didn't
define O_CLOEXEC or O_DSYNC yet, but those arrived in macOS releases
10.7 and 10.6 (respectively), which themselves reached EOL around a
decade ago. We've already made use of other POSIX features that early
macOS vintages can't compile (for example commits 623cc673, d2e15083).
A later commit will use O_CLOEXEC on POSIX systems so it would be
strange to pretend here that it's optional, and we might as well give
O_DSYNC the same treatment since the reference is also guarded by a test
for a macOS-specific macro, and we know that current Macs have it.
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
Historically we've accepted interval input like 'P.1e10D'. This
is probably an accident of having used strtod() to do the parsing,
rather than something anyone intended, but it's been that way for
a long time. Commit e39f99046 broke this by trying to parse the
integer and fractional parts separately, without accounting for
the possibility of an exponent. In principle that coding allowed
for precise conversions of field values wider than 15 decimal
digits, but that does not seem like a goal worth sweating bullets
for. So, rather than trying to manage an exponent on top of the
existing complexity, let's just revert to the previous coding that
used strtod() by itself. We can still improve on the old code to
the extent of allowing the value to range up to 1.0e15 rather than
only INT_MAX. (Allowing more than that risks creating problems
due to precision loss: the converted fractional part might have
absolute value more than 1. Perhaps that could be dealt with in
some way, but it really does not seem worth additional effort.)
Per bug #17795 from Alexander Lakhin. Back-patch to v15 where
the faulty code came in.
Discussion: https://postgr.es/m/17795-748d6db3ed95d313@postgresql.org
This was not something that required consideration before MERGE
was invented; but MERGE builds a join tree that left-joins to the
result relation, meaning that remove_useless_joins will consider
removing it. That should generally be stopped by the query's use
of output variables from the result relation. However, if the
result relation is inherited (e.g. a partitioned table) then
we don't add any row identity variables to the query until
expand_inherited_rtentry, which happens after join removal.
This was exposed as of commit 3c569049b, which made it possible
to deduce that a partitioned table could contain at most one row
matching a join key, enabling removal of the not-yet-expanded
result relation. Ooops.
To fix, let's just teach join_is_removable that the query result
rel is never removable. It's a cheap enough test in any case,
and it'll save some cycles that we'd otherwise expend in proving
that it's not removable, even in the cases we got right.
Back-patch to v15 where MERGE was added. Although I think the
case cannot be reached in v15, this seems like cheap insurance.
Per investigation of a report from Alexander Lakhin.
Discussion: https://postgr.es/m/36bee393-b351-16ac-93b2-d46d83637e45@gmail.com
For no clearly good reason, make_modifytable assumed that it
could not reach its get-the-FDW-info-the-hard-way path in MERGE.
It's currently possible to demonstrate that assertion failing,
which seems to be due to an upstream planner bug; but there's no
good reason to do it like this at all. Let's apply the principle
of separation of concerns and make the MERGE check separately,
after getting or not getting the fdwroutine pointer.
Per report from Alexander Lakhin. No test case, since I think
the potential test condition will go away soon.
Discussion: https://postgr.es/m/36bee393-b351-16ac-93b2-d46d83637e45@gmail.com
The RelOptInfo->userid field (the user ID to check permissions as) of an
"otherrel" relation was being copied from its parent relation, which is
correct in most cases but wrong when the parent is a subquery. In that
case, using the value from the RTEPermissionInfo of the child itself is
the appropriate thing to do.
Coming up with a test case where user-visible behavior changes proves
hard enough, so we don't add one here.
Bug introduced by a61b1f7482, discovered by Amit while reviewing
nearby code.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqE0WY_AhLnGtTsY7eYebG212XWbM-D8gr2A_ToOHyCywQ@mail.gmail.com
In generate_orderedappend_paths(), when match_partition_order_desc was
true, we would lcons() items to various lists in a loop over each live
partition. When the number of live partitions was large, the lcons()
could show up in profiles due to it having to perform memmove() to make
way for the new list item.
Here we adjust things so that we just perform the loop over the live
partitions backwards when match_partition_order_desc is true. This allows
us to simplify the logic in the loop. Now, as far as the guts of the loop
knows, there's no difference between match_partition_order and
match_partition_order_desc. We can just set match_partition_order to true
so that we build the correct list of paths for the asc and desc case. Per
idea from Andres Freund.
Discussion: https://postgr.es/m/20230217002351.nyt4y5tdzg6hugdt@awork3.anarazel.de
To allow testing for general support for fast bitscan intrinsics,
add symbols HAVE_BITSCAN_REVERSE and HAVE_BITSCAN_FORWARD.
Also do related cleanup in AllocSetFreeIndex(): Previously, we
tested for HAVE__BUILTIN_CLZ and copied the relevant internals of
pg_leftmost_one_pos32(), with a special fallback that does less
work than the general fallback for that function. Now that we have
a more general test, we just call pg_leftmost_one_pos32() directly
for platforms with intrinsic support. On gcc at least, there is no
difference in the binary for non-assert builds.
Discussion: https://www.postgresql.org/message-id/CAFBsxsEPc%2BFnX_0vmmQ5DHv60sk4rL_RZJ%2BMD6ei%3D76L0kFMvA%40mail.gmail.com
The setting of the process title could be seen on profiles of very
fast-to-execute queries. In many locations where we call
set_ps_display() we pass along a string constant, the length of which is
known during compilation. Here we effectively rename set_ps_display() to
set_ps_display_with_len() and then add a static inline function named
set_ps_display() which calls strlen() on the given string. This allows
the compiler to optimize away the strlen() call when dealing with
call sites passing a string constant. We can then also use memcpy()
instead of strlcpy() to copy the string into the destination buffer.
That's significantly faster than strlcpy's byte-at-a-time way of
copying.
Here we also take measures to improve some code which was adjusting the
process title to add a " waiting" suffix to it. Call sites which require
this can now just call set_ps_display_suffix() to add or adjust the suffix
and call set_ps_display_remove_suffix() to remove it again.
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvocBvvk-0gWNA2Gohe+sv9fMcv+fK_G+siBKJrgDG4O7g@mail.gmail.com
When evaluating clauses on multiple scan keys of a multi-column BRIN
index, we can stop processing as soon as we find a scan key eliminating
the range, and the range should not be added to tbe bitmap.
That's how it worked before 14, but since a681e3c107 the code treated
the range as matching if it matched at least the last scan key.
Backpatch to 14, where this code was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/ebc18613-125e-60df-7520-fcbe0f9274fc%40enterprisedb.com
ruleutils.c blindly printed the user-given alias (or nothing if there
hadn't been one) for the target table of INSERT/UPDATE/DELETE queries.
That works a large percentage of the time, but not always: for queries
appearing in WITH, it's possible that we chose a different alias to
avoid conflict with outer-scope names. Since the chosen alias would
be used in any Var references to the target table, this'd lead to an
inconsistent printout with consequences such as dump/restore failures.
The correct logic for printing (or not) a relation alias was embedded
in get_from_clause_item. Factor it out to a separate function so that
we don't need a jointree node to use it. (Only a limited part of that
function can be reached from these new call sites, but this seems like
the cleanest non-duplicative factorization.)
In passing, I got rid of a redundant "\d+ rules_src" step in rules.sql.
Initial report from Jonathan Katz; thanks to Vignesh C for analysis.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/e947fa21-24b2-f922-375a-d4f763ef3e4b@postgresql.org
Discussion: https://postgr.es/m/CALDaNm1MMntjmT_NJGp-Z=xbF02qHGAyuSHfYHias3TqQbPF2w@mail.gmail.com
A new callback named startup_cb, called shortly after a module is
loaded, is added. This makes possible the initialization of any
additional state data required by a module. This initial state data can
be saved in a ArchiveModuleState, that is now passed down to all the
callbacks that can be defined in a module. With this design, it is
possible to have a per-module state, aimed at opening the door to the
support of more than one archive module.
The initialization of the callbacks is changed so as
_PG_archive_module_init() does not anymore give in input a
ArchiveModuleCallbacks that a module has to fill in with callback
definitions. Instead, a module now needs to return a const
ArchiveModuleCallbacks.
All the structure and callback definitions of archive modules are moved
into their own header, named archive_module.h, from pgarch.h.
Command-based archiving follows the same line, with a new set of files
named shell_archive.{c,h}.
There are a few more items that are under discussion to improve the
design of archive modules, like the fact that basic_archive calls
sigsetjmp() by itself to define its own error handling flow. These will
be adjusted later, the changes done here cover already a good portion
of what has been discussed.
Any modules created for v15 will need to be adjusted to this new
design.
Author: Nathan Bossart
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20230130194810.6fztfgbn32e7qarj@awork3.anarazel.de
In commit 8bf6ec3ba, I mistakenly supposed that MergeAttributes'
loop over saved_schema was reprocessing column definitions that
had already been checked earlier: there is a variant syntax for
creating a child partition in which that's not true. So we need
to duplicate the full check appearing further up.
(Actually, I believe that the "if (restdef->identity)" part is
not reachable, because we reject identity on partitions earlier.
But it seems wise to keep the check, in case that's ever relaxed,
and to keep this code in sync with the other instance.)
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/4a8200ca-8378-653e-38ed-b2e1f1611aa6@gmail.com
d9d7fe68d3 made use of an existing wait event when sending data from the
apply worker, but we should have invented a new wait event since this is a
new place to wait.
This patch corrects the mistake by using a new wait event
"LogicalApplySendData".
Author: Hou Zhijie
Reviewed-by: Peter Smith
Discussion: https://postgr.es/m/CA+TgmobWzbr9H3yN3dLVckviEZKemPwd+XyCFKEgyZQZhgP66Q@mail.gmail.com
Support for regexps in database and role entries for pg_hba.conf has
been added in 8fea8683, and efb6f4a has extended support of pg-user in
pg_ident.conf, still both of them have missed a short description about
the new patterns supported in their respective sample files.
This commit closes the gap, by providing a short description of all the
new features supported for each entry type.
Reported-by: Pavel Luzanov
Reviewed-by: Jelte Fennema, Pavel Luzanov
Discussion: https://postgr.es/m/e495112d-8741-e651-64a2-ecb5728f1a56@postgrespro.ru
On MERGE / WHEN MATCHED DELETE it's not possible to get cross-partition
updates, so we don't initialize cpUpdateRetrySlot; however, the code was
not careful to ignore the value in that case. Make it do so.
Backpatch to 15.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/17792-0f89452029662c36@postgresql.org
force_parallel_mode is meant to be used to allow us to exercise the
parallel query infrastructure to ensure that it's working as we expect.
It seems some users think this GUC is for forcing the query planner into
picking a parallel plan regardless of the costs. A quick look at the
documentation would have made them realize that they were wrong, but the
GUC is likely too conveniently named which, evidently, seems to often
result in users expecting that it forces the planner into usefully
parallelizing queries.
Here we rename the GUC to something which casual users are less likely to
mistakenly think is what they need to make their query run more quickly.
For now, the old name can still be used. We'll revisit if the old name
mapping can be removed once the buildfarm configs are all updated.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvrsOi92_uA7PEaHZMH-S4Xv+MGhQWA+GrP8b1kjpS1HjQ@mail.gmail.com
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
In commit b78f6264e I opined that it was "too risky" to delete a
relation's RelOptInfo from the planner's data structures when we have
realized that we don't need to join to it; so instead we just marked
it as a dead relation. In hindsight that judgment seems flawed: any
subsequent access to such a dead relation is arguably a bug in
itself, so leaving the RelOptInfo present just helps to mask bugs.
Let's delete it instead, allowing removal of the whole notion of a
"dead relation". So far as the regression tests can find, this
requires no other code changes, except for one Assert in equivclass.c
that was very dubiously not complaining about access to a dead rel.
Discussion: https://postgr.es/m/229905.1676062220@sss.pgh.pa.us
Late in the development of commit 2489d76c4, I (tgl) incorrectly
concluded that the new function have_unsafe_outer_join_ref couldn't
ever reach its inner loop. That should be the case if the inner
rel's parameterization is based on just one Var, but it could be
based on Vars from several relations, and then not only is the
inner loop reachable but it's wrongly coded.
Despite those errors, it still appears that the whole thing is
redundant given previous join_is_legal checks, so let's arrange
to only run it in assert-enabled builds.
Diagnosis and patch by Richard Guo, per fuzz testing by Justin Pryzby.
Discussion: https://postgr.es/m/20230212235823.GW1653@telsasoft.com
In commit ad89a5d115, we added an unhelpful 'ON' that doesn't match
the input syntax. This was discovered while adding code to support for
DDL in logical replication.
No backpatch because of the change of behavior, however improbable it
may be that somebody is depending on this.
Author: Zheng Li <zhengli10@gmail.com>
Discussion: https://postgr.es/m/CAAD30UKg8rXeGM8Oy_MAmxKBL_K5DiHXdeNF=hUefcu1C_6VfQ@mail.gmail.com
The logic in this area was recently changed in 7da51590e, however, in that
commit, I neglected to consider that the conditions in which we should
pfree the old Datum needed to be updated after that change. This could
result in trying to pfree a NULL value, as was demonstrated by Alexander
Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/4103db46-d888-6d1d-e88d-87c21ed99472@gmail.com
Here we fix a faulty "if" condition which failed to correctly handle two
or more consecutive NULL transition values when checking if the new value
is DISTINCT from the old value for presorted aggregates. Given a suitably
non-strict aggregate transition function, a byref aggregate could cause a
crash due to calling the type's equality function and passing along a
(Datum) 0 value to test for equality, the equality function would then try
to dereference that 0 Datum and segfault. For byval types, there'd have
been no crash and the equality function would have seen that the two 0
Datums matched, which (only by chance) meant the calling code would have
worked correctly.
Here we ensure that we only call the equality function when neither of
the input values are NULL.
This code is all new as of 1349d2790, so no backpatch needed.
Reported-by: Fujii Masao
Discussion: https://postgr.es/m/860c6d6f-a3c5-3ae9-9da2-827177bede06@oss.nttdata.com
When an aggregate function is used as a WindowFunc and a tuple transitions
out of the window frame, we ordinarily try to make use of the aggregate
function's inverse transition function to "unaggregate" the exiting tuple.
This optimization is disabled for various cases, including when the
aggregate contains a volatile function. In such a case we'd be unable to
ensure that the transition value was calculated to the same value during
transitions and inverse transitions. Unfortunately, we did this check by
calling contain_volatile_functions() which does not recursively search
SubPlans for volatile functions. If the aggregate function's arguments or
its FILTER clause contained a subplan with volatile functions then we'd
fail to notice this.
Here we fix this by just disabling the optimization when the WindowFunc
contains any subplans. Volatile functions are not the only reason that a
subplan may have nonrepeatable results.
Bug: #17777
Reported-by: Anban Company
Discussion: https://postgr.es/m/17777-860b739b6efde977%40postgresql.org
Reviewed-by: Tom Lane
Backpatch-through: 11
This commit removes most of the Plan and Path nodes, which should never
be included in the query jumbling because we ignore these in Query
nodes. This is facilitated by making no_query_jumble an inherited
attribute, like no_copy, no_equal and no_read when the supertype of a
node is found as marked with that.
RawStmt is not used in parsed queries, so it can be removed from the
query jumbling. A couple of nodes defined in pathnodes.h, plannodes.h
and primnodes.h with NodeTag as supertype need to be marked
individually.
Forcing the execution of the query jumbling code with compute_query_id =
auto while pg_stat_statements is loaded brings the code coverage of
queryjumblefuncs.funcs.c to 95.6%.
The core code does not yet include a way to enforce the execution in
query jumbling except in pg_stat_statements, so the numbers I am
mentioning above will not reflect on the default coverage report with
just what is done in this commit.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3344827.1675809127@sss.pgh.pa.us
Commit e39f99046 moved some code up closer to the start of
DecodeInterval(), without noticing that it had been implicitly
relying on previous checks to reject the case of empty input.
Given empty input, we'd now dereference a pointer that hadn't been
set, possibly leading to a core dump. (But if we fail to provoke
a SIGSEGV, nothing bad happens, and the expected syntax error is
thrown a bit later.)
Per bug #17788 from Alexander Lakhin. Back-patch to v15 where
the fault was introduced.
Discussion: https://postgr.es/m/17788-dabac9f98f7eafd5@postgresql.org
Builds on 28e626bde0 and f30d62c2fc. See the former for motivation.
Rows of the view show IO operations for a particular backend type, IO target
object, IO context combination (e.g. a client backend's operations on
permanent relations in shared buffers) and each column in the view is the
total number of IO Operations done (e.g. writes). So a cell in the view would
be, for example, the number of blocks of relation data written from shared
buffers by client backends since the last stats reset.
In anticipation of tracking WAL IO and non-block-oriented IO (such as
temporary file IO), the "op_bytes" column specifies the unit of the "reads",
"writes", and "extends" columns for a given row.
Rows for combinations of IO operation, backend type, target object and context
that never occur, are ommitted entirely. For example, checkpointer will never
operate on temporary relations.
Similarly, if an IO operation never occurs for such a combination, the IO
operation's cell will be null, to distinguish from 0 observed IO
operations. For example, bgwriter should not perform reads.
Note that some of the cells in the view are redundant with fields in
pg_stat_bgwriter (e.g. buffers_backend). For now, these have been kept for
backwards compatibility.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Samay Sharma <smilingsamay@gmail.com>
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
analyzejoins.c took care to clean out removed relids from the
clause_relids and required_relids of RestrictInfos associated with
the doomed rel ... but it paid no attention to the fact that if such a
RestrictInfo contains an OR clause, there will be sub-RestrictInfos
containing similar fields.
I'm more than a bit surprised that this oversight hasn't caused
visible problems before. In any case, it's certainly broken now,
so add logic to clean out the sub-RestrictInfos recursively.
We might need to back-patch this someday.
Per bug #17786 from Robins Tharakan.
Discussion: https://postgr.es/m/17786-f1ea7fbdab97daec@postgresql.org
One of the add_nulling_relids calls in deconstruct_distribute_oj_quals
added an OJ relid to too few Vars, while the other added it to too
many. We should consider the syntactic structure not
min_left/righthand while deciding which Vars to decorate, and when
considering pushing up a lower outer join pursuant to transforming the
second form of OJ identity 3 to the first form, we only want to
decorate Vars coming from its LHS.
In a related bug, I realized that make_outerjoininfo was failing to
check a very basic property that's needed to apply OJ identity 3:
the syntactically-upper outer join clause can't refer to the lower
join's LHS. This didn't break the join order restriction logic,
but it led to setting bogus commute_xxx bits, possibly resulting
in bogus nullingrel markings in modified quals.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/CAMbWs497CmBruMx1SOjepWEz+T5NWa4scqbdE9v7ZzSXqH_gQw@mail.gmail.com
Discussion: https://postgr.es/m/CAEP4nAx9C5gXNBfEA0JBfz7B+5f1Bawt-RWQWyhev-wdps8BZA@mail.gmail.com
Commit 28e626bde0 introduced the infrastructure for tracking more detailed IO
statistics. This commit adds the actual collection of the new IO statistics
for relations and temporary relations. See aforementioned commit for goals and
high-level design.
The changes in this commit are fairly straight-forward. The bulk of the change
is to passing sufficient information to the callsites of pgstat_count_io_op().
A somewhat unsightly detail is that it currently is hard to find a better
place to count fsyncs than in md.c, whereas the other pgstat_count_io_op()
calls are in bufmgr.c/localbuf.c. As the number of fsyncs is tied to md.c
implementation details, it's not obvious there is a better answer.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
This commit adds the infrastructure for more detailed IO statistics. The calls
to actually count IOs, a system view to access the new statistics,
documentation and tests will be added in subsequent commits, to make review
easier.
While we already had some IO statistics, e.g. in pg_stat_bgwriter and
pg_stat_database, they did not provide sufficient detail to understand what
the main sources of IO are, or whether configuration changes could avoid
IO. E.g., pg_stat_bgwriter.buffers_backend does contain the number of buffers
written out by a backend, but as that includes extending relations (always
done by backends) and writes triggered by the use of buffer access strategies,
it cannot easily be used to tune background writer or checkpointer. Similarly,
pg_stat_database.blks_read cannot easily be used to tune shared_buffers /
compute a cache hit ratio, as the use of buffer access strategies will often
prevent a large fraction of the read blocks to end up in shared_buffers.
The new IO statistics count IO operations (evict, extend, fsync, read, reuse,
and write), and are aggregated for each combination of backend type (backend,
autovacuum worker, bgwriter, etc), target object of the IO (relations, temp
relations) and context of the IO (normal, vacuum, bulkread, bulkwrite).
What is tracked in this series of patches, is sufficient to perform the
aforementioned analyses. Further details, e.g. tracking the number of buffer
hits, would make that even easier, but was left out for now, to keep the scope
of the already large patchset manageable.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
While removing the use of SHM_QUEUE from predicate.c, in 9600371764, I made
two mistakes in GetSafeSnapshotBlockingPids():
- Removed the check for output_size
- Previously, when the first loop didn't find a matching proc, sxact would be
NULL. But with naive use of dlist_foreach() it ends up as the value of the
last iteration.
The second issue is the cause of occasional failures in the deadlock-hard and
deadlock-soft isolation tests that we have been observing on CI. The issue was
very hard to reproduce, as it requires the transactions.sql regression test to
run at the same time as the deadlock-{hard,soft} isolation test.
I did not find other similar mistakes in 9600371764.
Discussion: https://postgr.es/m/20230208221145.bwzhancellclrgia@awork3.anarazel.de
The code I added in fee7b77b9 could misbehave if commute_above_r
contains multiple relids. While adding too many relids here is
probably harmless (pre-fee7b77b9, we did it all the time), it's
not very expensive to be accurate: we just have to intersect
commute_above_r with the join's relids.
Discussion: https://postgr.es/m/17781-c0405c8b3cd5e072@postgresql.org
The DDLs like Refresh Materialized views that generate lots of temporary
data due to rewrite rules may not be processed by output plugins (for
example pgoutput). So, we won't send keep-alive messages for a long time
while processing such commands and that can lead the subscriber side to
timeout. We have previously fixed a similar case for large transactions in
commit f95d53eded where the output plugin filters all or most of the
changes but missed to handle the DDLs.
We decided not to backpatch this as this adds a new callback in the
existing exposed structure and moreover, users can increase the
wal_sender_timeout and wal_receiver_timeout to avoid this problem.
Author: Wang wei, Hou Zhijie
Reviewed-by: Peter Smith, Ashutosh Bapat, Shi yu, Amit Kapila
Discussion: https://postgr.es/m/OS3PR01MB6275478E5D29E4A563302D3D9E2B9@OS3PR01MB6275.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
The logic for when to add the current outer join's own relid
to the nullingrels sets of output Vars and PHVs was overly
complicated and underly correct. Not sure why I didn't think
of this before, but since what we want is marking per the
syntactic structure, we can just consult our records about
the syntactic structure, ie syn_righthand/syn_lefthand.
Also, tighten the rule about when to add the commute_above_r
bits, in hopes of eliminating some squishy reasoning. I do not
know of a reason to think that that's broken as-is, but this way
seems better.
Per bug #17781 from Robins Tharakan.
Discussion: https://postgr.es/m/17781-c0405c8b3cd5e072@postgresql.org
Currently, we reuse WAIT_EVENT_LOGICAL_PARALLEL_APPLY_STATE_CHANGE in the
apply worker while sending data to the parallel apply worker via a shared
memory queue. This is not appropriate as one won't be able to distinguish
whether the worker is waiting for sending data or for the state change.
To patch instead uses the wait event WAIT_EVENT_MQ_SEND which has been
already used in blocking mode while sending data via a shared memory
queue.
Author: Hou Zhijie
Reviewed-by: Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57161C680B22E4C591628EE994DA9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Here we further simplify the code in heapgettup() and
heapgettup_pagemode() to make better use of the helper functions added in
the previous recent refactors in this area.
In passing, remove an unneeded cast added in 8ca6d49f6.
Author: Melanie Plageman
Reviewed-by: Andres Freund, David Rowley
Discussion: https://postgr.es/m/CAAKRu_YSOnhKsDyFcqJsKtBSrd32DP-jjXmv7hL0BPD-z0TGXQ@mail.gmail.com
Like the implementation for node copy, write and read, this node
requires a custom implementation so as the query jumbling is able to
consider the correct value assigned to it, depending on its type (int,
float, bool, string, bitstring).
Based on a dump of pg_stat_statements from the regression database, this
would confuse the query jumbling of the following queries:
- SET.
- COPY TO with SELECT queries.
- START TRANSACTION with different isolation levels.
- ALTER TABLE with default expressions.
- CREATE TABLE with partition bounds.
Note that there may be a long-term argument in tracking the location of
such nodes so as query strings holding such nodes could be normalized,
but this is left as a separate discussion.
Oversight in 3db72eb.
Discussion: https://postgr.es/m/Y9+HuYslMAP6yyPb@paquier.xyz
The existing comments in load_relcache_init_file() were not flexible
when new entries were added at the end, so they ended up a bit wrong.
Simplify the comments to avoid this issue.
The portion of join_is_removable() that checks PlaceHolderVars
can be made a little more accurate and intelligible than it was.
The key point is that we can allow join removal even if a PHV
mentions the target rel in ph_eval_at, if that mention was only
added as a consequence of forcing the PHV up to a join level
that's at/above the outer join we're trying to get rid of.
We can check that by testing for the OJ's relid appearing in
ph_eval_at, indicating that it's supposed to be evaluated after
the outer join, plus the existing test that the contained
expression doesn't actually mention the target rel.
While here, add an explicit check that there'll be something left
in ph_eval_at after we remove the target rel and OJ relid. There
is an Assert later on about that, and I'm not too sure that the
case could happen for a PHV satisfying the other constraints,
but let's just check. (There was previously a bms_is_subset test
that meant to cover this risk, but it's broken now because it
doesn't account for the fact that we'll also remove the OJ relid.)
The real reason for revisiting this code though is that the
Assert I left behind in 8538519db turns out to be easily
reachable, because if a PHV of this sort appears in an upper-level
qual clause then that clause's clause_relids will include the
PHV's ph_eval_at relids. This is a mirage though: we have or soon
will remove these relids from the PHV's ph_eval_at, and therefore
they no longer belong in qual clauses' clause_relids either.
Remove that Assert in join_is_removable, and replace the similar
one in remove_rel_from_query with code to remove the deleted relids
from clause_relids.
Per bug #17773 from Robins Tharakan.
Discussion: https://postgr.es/m/17773-a592e6cedbc7bac5@postgresql.org
In standby mode, we don't actually report progress of recovery,
but up until now, startup_progress_timeout_handler() nevertheless
got called every log_startup_progress_interval seconds. That's
an unnecessary expense, so avoid it.
Report by Thomas Munro. Patch by Bharath Rupireddy, reviewed by
Simon Riggs, Thomas Munro, and me. Back-patch to v15, where
the problem was introduced.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGKCHSffAj8zZJKJvNX7ygnQFxVD6wm1d-2j3fVw%2BMafPQ%40mail.gmail.com
This extends the work begun by a73952b, with the addition of a GUC check
for flag combinations in check_GUC_init(), making sure that anything
defined with GUC_NO_SHOW_ALL also includes GUC_NOT_IN_SAMPLE, as first
step. There has never been any GUCs of this kind in the core code, and
this combination makes little sense as a parameter marked as not fit for
SHOW ALL should not be hidden in postgresql.conf.sample.
Note that GUCs marked with GUC_NO_SHOW_ALL are not listed under
pg_settings or SHOW ALL (still they can be queried individually), making
them unfit for checks via SQL queries in the regression tests that do a
full scan of the parameters available. The SQL tests are still a bit
incorrect about that, and will be cleaned up in a separate commit. We
have also discussed the possibility to extend the SQL functions for GUCs
so as they could show more information about parameters defined with
GUC_NO_SHOW_ALL, though it has been concluded that this is not worth the
extra complication in the long run, an enforced policy at initialization
time being enough to do the same job.
Per discussion with Nitin Jadhav and Tom Lane.
Discussion: https://postgr.es/m/CAMm1aWaYe0muu3ABo7iSAgK+OWDS9yNe8GGRYnCyeEpScYKa+g@mail.gmail.com
This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
make_outerjoininfo was set up to update SpecialJoinInfo's
commute_below, commute_above_l, commute_above_r fields as soon as
it found a pair of outer joins that look like they can commute.
However, this decision could be negated later in the same loop due
to finding an intermediate outer join that prevents commutation.
That left us with commute_xxx fields that were contradictory to the
join order restrictions expressed in min_lefthand/min_righthand.
The latter fields would keep us from actually choosing a bad join
order; but the inconsistent commute_xxx fields could bollix details
such as the varnullingrels values created for intermediate join
relation targetlists, ending in an assertion failure in setrefs.c.
To fix, wait till the end of make_outerjoininfo where we have
accurate values for min_lefthand/min_righthand, and then insert
only relids not present in those sets into the commute_xxx fields.
Per SQLSmith testing by Robins Tharakan. Note that while Robins
bisected the failure to commit b448f1c8d, it's really the fault of
2489d76c4. The outerjoin_delayed logic removed in the later commit
was keeping us from deciding that troublesome join pairs commute,
at least in the specific example seen here.
Discussion: https://postgr.es/m/CAEP4nAyAORgE8K_RHSmvWbE9UaChhjbEL1RrDU3neePwwRUB=A@mail.gmail.com
deconstruct_distribute tweaks the outer join scope (ojscope)
it passes to distribute_qual_to_rels when considering an outer
join qual that's above potentially-commutable outer joins.
However, if the current join is *not* potentially commutable,
we shouldn't do that. The argument that distribute_qual_to_rels
will not do something wrong with the bogus ojscope falls flat
if we don't pass it non-null postponed_oj_qual_list. Moreover,
there's no need to play games in this case since we aren't going
to commute anything.
Per SQLSmith testing by Robins Tharakan.
Discussion: https://postgr.es/m/CAEP4nAw74k4b-=93gmfCNX3MOY3y4uPxqbk_MnCVEpdsqHJVsg@mail.gmail.com
If we have a RestrictInfo that mentions both the removal-candidate
relation and the outer join's relid, then that is a pushed-down
condition not a join condition, so it should be grounds for deciding
that we can't remove the outer join. In commit 2489d76c4, I'd blindly
included the OJ's relid into "joinrelids" as per the new standard
convention, but the checks of attr_needed and ph_needed should only
allow the join's input rels to be mentioned.
Having done that, the check for references in pushed-down quals
a few lines further down should be redundant. I left it in place
as an Assert, though.
While researching this I happened across a couple of comments that
worried about the effects of update_placeholder_eval_levels.
That's gone as of b448f1c8d, so we can remove some worry.
Per bug #17769 from Robins Tharakan. The submitted test case
triggers this more or less accidentally because we flatten out
a LATERAL sub-select after we've done join strength reduction;
if we did that in the other order, this problem would be masked
because the outer join would get simplified to an inner join.
To ensure that the committed test case will continue to test
what it means to even if we make that happen someday, use a
test clause involving COALESCE(), which will prevent us from
using it to do join strength reduction.
Patch by me, but thanks to Richard Guo for initial investigation.
Discussion: https://postgr.es/m/17769-e4f7a5c9d84a80a7@postgresql.org
After pulling up LATERAL subqueries, we may have qual clauses that
refer to relations outside their syntactic scope. Before doing any
such pullup, prepjointree.c checks to make sure that it wouldn't
create a semantically-invalid situation; but we leave it to
deconstruct_jointree() to actually move these quals up the join
tree to a place where they can be evaluated. In commit 2489d76c4,
I (tgl) refactored deconstruct_jointree() in a way that caused
assertion failures while moving such quals, because the new logic
failed to distinguish "this jointree node is a parent of the source
one" from "this jointree node is processed after the source
one in depth-first order".
Fix this, and at the same time reduce the overhead a bit, by
getting rid of the common PostponedQual list and instead making each
JoinTreeItem contain a list of quals that needed to be postponed to
its level. We can help distribute_qual_to_rels find the appropriate
JoinTreeItem efficiently by adding parent-item links to the
JoinTreeItem data structure. This ends up being the same number
of relid subset checks as the original (pre-bug) logic, but less
list manipulation is required during multi-level postponements.
Richard Guo and Tom Lane, per bug #17768 from Robins Tharakan.
Discussion: https://postgr.es/m/17768-5ac8730ece54478f@postgresql.org
This allows underscores to be used in integer and numeric literals,
and their corresponding type input functions, for visual grouping.
For example:
1_500_000_000
3.14159_26535_89793
0xffff_ffff
0b_1001_0001
A single underscore is allowed between any 2 digits, or immediately
after the base prefix indicator of non-decimal integers, per SQL:202x
draft.
Peter Eisentraut and Dean Rasheed
Discussion: https://postgr.es/m/84aae844-dc55-a4be-86d9-4f0fa405cc97%40enterprisedb.com
The prior coding of int64_div_fast_to_numeric() had a number of bugs
that would cause it to fail under different circumstances, such as
with log10val2 <= 0, or log10val2 a multiple of 4, or in the "slow"
numeric path with log10val2 >= 10.
None of those could be triggered by any of our current code, which
only uses log10val2 = 3 or 6. However, they made it a hazard for any
future code that might use it. Also, since this is exported by
numeric.c, users writing their own C code might choose to use it.
Therefore fix, and back-patch to v14, where it was introduced.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCW8gXgW0tgPxPgHDPhVX71%2BSWFRkhnXy%2BTfGDsKLepu2g%40mail.gmail.com
To interlock against concurrent drops, we use to hold ExclusiveLock on
pg_replication_origin till xact commit. This blocks even concurrent drops
of different origins by tablesync workers. So, instead, lock the specific
origin to interlock against concurrent drops.
This reduces the test time variability in src/test/subscription where
multiple tables are being synced.
Author: Vignesh C
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/1412708.1674417574@sss.pgh.pa.us
Backward and forward scans share much of the same page acquisition code.
Here we consolidate that code to reduce some duplication.
Additionally, add a new rs_coffset field to HeapScanDescData to track the
offset of the current tuple. The new field fits nicely into the padding
between a bool and BlockNumber field and saves having to look at the last
returned tuple to figure out which offset we should be looking at for the
current tuple.
Author: Melanie Plageman
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/CAAKRu_bvkhka0CZQun28KTqhuUh5ZqY=_T8QEqZqOL02rpi2bw@mail.gmail.com
In the 90s we needed to deal with computers that still had the
pre-standard signal masking APIs. That hasn't been relevant for a very
long time on Unix systems, and c94ae9d8 got rid of a remaining
dependency in our Windows porting code. PG_SETMASK didn't expose
save/restore functionality, so we'd already started using sigprocmask()
directly in places, creating the visual distraction of having two ways
to spell it. It's not part of the API that extensions are expected to
be using (but if they are, the change will be trivial). It seems like a
good time to drop the old macro and just call the standard POSIX
function.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BKfQgrhHP2DLTohX1WwubaCBHmTzGnAEDPZ-Gug-Xskg%40mail.gmail.com
Improve the comment explaining the choice of rscale in numeric_sqrt(),
and ensure that the code works consistently when other values of
NBASE/DEC_DIGITS are used.
Note that, in practice, we always expect DEC_DIGITS == 4, and this
does not change the computation in that case.
Joel Jacobson and Dean Rasheed
Discussion: https://postgr.es/m/06712c29-98e9-43b3-98da-f234d81c6e49%40app.fastmail.com
Extend the existing developer option 'logical_replication_mode' to help
test the parallel apply of large transactions on the subscriber.
When set to 'buffered', the leader sends changes to parallel apply workers
via a shared memory queue. When set to 'immediate', the leader serializes
all changes to files and notifies the parallel apply workers to read and
apply them at the end of the transaction.
This helps in adding tests to cover the serialization code path in
parallel streaming mode.
Author: Hou Zhijie
Reviewed-by: Peter Smith, Kuroda Hayato, Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
As coded, the timeout given to WaitLatch() was always equal to
PGARCH_AUTOWAKE_INTERVAL, as time() was called two times repeatedly.
This simplification could have been done in d75288f.
While on it, this adjusts a comment in pgarch.c to describe the archiver
in a more neutral way.
Author: Sravan Kumar, Nathan Bossart
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CA+=NbjjqYE9-Lnw7H7DAiS5jebmoMikwZQb_sBP7kgBCn9q6Hg@mail.gmail.com
Here remove some dead code from heapgettup() and heapgettup_pagemode()
which was trying to support NoMovementScanDirection scans. This code can
never be reached as standard_ExecutorRun() never calls ExecutePlan with
NoMovementScanDirection.
Additionally, plans which were scanning an unordered index would use
NoMovementScanDirection rather than ForwardScanDirection. There was no
real need for this, so here we adjust this so we use ForwardScanDirection
for unordered index scans. A comment in pathnodes.h claimed that
NoMovementScanDirection was used for PathKey reasons, but if that was
true, it no longer is, per code in build_index_paths().
This does change the non-text format of the EXPLAIN output so that
unordered index scans now have a "Forward" scan direction rather than
"NoMovement". The text format of EXPLAIN has not changed.
Author: Melanie Plageman
Reviewed-by: Tom Lane, David Rowley
Discussion: https://postgr.es/m/CAAKRu_bvkhka0CZQun28KTqhuUh5ZqY=_T8QEqZqOL02rpi2bw@mail.gmail.com
In commit 2489d76c4, I'd thought it'd be safe to assert that a
PlaceHolderVar appearing in a scan-level expression has empty
nullingrels. However this is not so, as when we determine that a
join relation is certainly empty we'll put its targetlist into a
Result-with-constant-false-qual node, and nothing is done to adjust
the nullingrels of the Vars or PHVs therein. (Arguably, a Result
used in this way isn't really a scan-level node, but it certainly
isn't an upper node either ...)
It's not clear this is worth any close analysis, so let's just
take out the faulty Assert.
Per report from Robins Tharakan. I added a test case based on
his example, just in case somebody tries to tighten this up.
Discussion: https://postgr.es/m/CAEP4nAz7Enq3+DEthGG7j27DpuwSRZnW0Nh6jtNh75yErQ_nbA@mail.gmail.com
This commit changes the query jumbling code in queryjumblefuncs.c to be
generated automatically based on the information of the nodes in the
headers of src/include/nodes/ by using gen_node_support.pl. This
approach offers many advantages:
- Support for query jumbling for all the utility statements, based on the
state of their parsed Nodes and not only their query string. This will
greatly ease the switch to normalize the information of some DDLs, like
SET or CALL for example (this is left unchanged and should be part of a
separate discussion). With this feature, the number of entries stored
for utilities in pg_stat_statements is reduced (for example now
"CHECKPOINT" and "checkpoint" mean the same thing with the same query
ID).
- Documentation of query jumbling directly in the structure definition
of the nodes. Since this code has been introduced in pg_stat_statements
and then moved to code, the reasons behind the choices of what should be
included in the jumble are rather sparse. Note that some explanation is
added for the most relevant parts, as a start.
- Overall code reduction and more consistency with the other parts
generating read, write and copy depending on the nodes.
The query jumbling is controlled by a couple of new node attributes,
documented in nodes/nodes.h:
- custom_query_jumble, to mark a Node as having a custom
implementation.
- no_query_jumble, to ignore entirely a Node.
- query_jumble_ignore, to ignore a field in a Node.
- query_jumble_location, to mark a location in a Node, for
normalization. This can apply only to int fields, with "location" in
their name (only Const as of this commit).
There should be no compatibility impact on pg_stat_statements, as the
new code applies the jumbling to the same fields for each node (its
regression tests have no modification, for one).
Some benchmark of the query jumbling between HEAD and this commit for
SELECT and DMLs has proved that this new code does not cause a
performance regression, with computation times close for both methods.
For utility queries, the new method is slower than the previous method
of calculating a hash of the query string, though we are talking about
extra ns-level changes based on what I measured, which is unnoticeable
even for OLTP workloads as a query ID is calculated once per query
post-parse analysis.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
EquivalenceClasses are now understood as applying within a "join
domain", which is a set of inner-joined relations (possibly underneath
an outer join). We no longer need to treat an EC from below an outer
join as a second-class citizen.
I have hopes of eventually being able to treat outer-join clauses via
EquivalenceClasses, by means of only applying deductions within the
EC's join domain. There are still problems in the way of that, though,
so for now the reconsider_outer_join_clause logic is still here.
I haven't been able to get rid of RestrictInfo.is_pushed_down either,
but I wonder if that could be recast using JoinDomains.
I had to hack one test case in postgres_fdw.sql to make it still test
what it was meant to, because postgres_fdw is inconsistent about
how it deals with quals containing non-shippable expressions; see
https://postgr.es/m/1691374.1671659838@sss.pgh.pa.us. That should
be improved, but I don't think it's within the scope of this patch
series.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Remove RestrictInfo.nullable_relids, along with a good deal of
infrastructure that calculated it. One use-case for it was in
join_clause_is_movable_to, but we can now replace that usage with
a check to see if the clause's relids include any outer join
that can null the target relation. The other use-case was in
join_clause_is_movable_into, but that test can just be dropped
entirely now that the clause's relids include outer joins.
Furthermore, join_clause_is_movable_into should now be
accurate enough that it will accept anything returned by
generate_join_implied_equalities, so we can restore the Assert
that was diked out in commit 95f4e59c3.
Remove the outerjoin_delayed mechanism. We needed this before to
prevent quals from getting evaluated below outer joins that should
null some of their vars. Now that we consider varnullingrels while
placing quals, that's taken care of automatically, so throw the
whole thing away.
Teach remove_useless_result_rtes to also remove useless FromExprs.
Having done that, the delay_upper_joins flag serves no purpose any
more and we can remove it, largely reverting 11086f2f2.
Use constant TRUE for "dummy" clauses when throwing back outer joins.
This improves on a hack I introduced in commit 6a6522529. If we
have a left-join clause l.x = r.y, and a WHERE clause l.x = constant,
we generate r.y = constant and then don't really have a need for the
join clause. But we must throw the join clause back anyway after
marking it redundant, so that the join search heuristics won't think
this is a clauseless join and avoid it. That was a kluge introduced
under time pressure, and after looking at it I thought of a better
way: let's just introduce constant-TRUE "join clauses" instead,
and get rid of them at the end. This improves the generated plans for
such cases by not having to test a redundant join clause. We can also
get rid of the ugly hack used to mark such clauses as redundant for
selectivity estimation.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
This fixes a bug that, under some circumstances, would cause MERGE to
fail to properly recompute expressions for GENERATED STORED columns.
Formerly, ExecInitModifyTable() did not call ExecInitStoredGenerated()
for a MERGE command, which meant that the generated expressions
information was not computed until later, when the first merge action
was executed. However, if the first merge action to execute was an
UPDATE, then ExecInitStoredGenerated() could decide to skip some some
generated columns, if the columns on which they depended were not
updated, which was a problem if the MERGE also contained an INSERT
action, for which no generated columns should be skipped.
So fix by having ExecInitModifyTable() call ExecInitStoredGenerated()
for MERGE, and assume that it isn't safe to skip any generated columns
in a MERGE. Possibly that could be relaxed, by allowing some generated
columns to be skipped for a MERGE without an INSERT action, but it's
not clear that it's worth the effort.
Noticed while investigating bug #17759. Back-patch to v15, where MERGE
was added.
Dean Rasheed, reviewed by Tom Lane.
Discussion:
https://postgr.es/m/17759-e76d9bece1b5421c%40postgresql.orghttps://postgr.es/m/CAEZATCXb_ezoMCcL0tzKwRGA1x0oeE%3DawTaysRfTPq%2B3wNJn8g%40mail.gmail.com
Rename the developer option 'logical_decoding_mode' to the more flexible
name 'logical_replication_mode' because doing so will make it easier to
extend this option in the future to help test other areas of logical
replication.
Currently, it is used on the publisher side to allow streaming or
serializing each change in logical decoding. In the upcoming patch, we are
planning to use it on the subscriber. On the subscriber, it will allow
serializing the changes to file and notifies the parallel apply workers to
read and apply them at the end of the transaction.
We discussed exposing this parameter as a subscription option but
it did not seem advisable since it is primarily used for testing/debugging
and there is no other such parameter. We also discussed having separate
GUCs for publisher and subscriber but for current testing/debugging
requirements, one GUC is sufficient.
Author: Hou Zhijie
Reviewed-by: Peter Smith, Kuroda Hayato, Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoAy2c=Mx=FTCs+EwUsf2kQL5MmU3N18X84k0EmCXntK4g@mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Split out "ConfigOptionIsVisible" to perform the privilege
check for GUC_SUPERUSER_ONLY GUCs (which these days can also
be read by pg_read_all_settings role members), and move the
should-we-show-it checks from GetConfigOptionValues to its
sole caller.
This commit also removes get_explain_guc_options's check of
GUC_NO_SHOW_ALL, which seems to have got cargo-culted in there.
While there's no obvious use-case for marking a GUC both
GUC_EXPLAIN and GUC_NO_SHOW_ALL, if it were set up that way
one would expect EXPLAIN to show it --- if that's not what
you want, then don't set GUC_EXPLAIN.
In passing, simplify the loop logic in show_all_settings.
Nitin Jadhav, Bharath Rupireddy, Tom Lane
Discussion: https://postgr.es/m/CAMm1aWYgfekpRK-Jz5=pM_bV+Om=ktGq1vxTZ_dr1Z6MV-qokA@mail.gmail.com
9d9c02ccd introduced runConditions for window functions to allow
monotonic window function evaluation to be made more efficient when the
window function value went beyond some value that it would never go back
from due to its monotonic nature. That commit added prosupport functions
to inform the planner that row_number(), rank(), dense_rank() and some
forms of count(*) were monotonic. Here we add support for ntile(),
cume_dist() and percent_rank().
Reviewed-by: Melanie Plageman
Discussion: https://postgr.es/m/CAApHDvqR+VqB8s+xR-24bzJbU8xyFrBszJ17qKgECf7cWxLCaA@mail.gmail.com
We'd like to use TimestampDifferenceMilliseconds with the stop_time
possibly being TIMESTAMP_INFINITY, but up to now it's disclaimed
responsibility for overflow cases. Define it to clamp its output to
the range [0, INT_MAX], handling overflow correctly. (INT_MAX rather
than LONG_MAX seems appropriate, because the function is already
described as being intended for calculating wait times for WaitLatch
et al, and that infrastructure only handles waits up to INT_MAX.
Also, this choice gets rid of cross-platform behavioral differences.)
Having done that, we can replace some ad-hoc code in walreceiver.c
with a simple call to TimestampDifferenceMilliseconds.
While at it, fix some buglets in existing callers of
TimestampDifferenceMilliseconds: basebackup_copy.c had not read the
memo about TimestampDifferenceMilliseconds never returning a negative
value, and postmaster.c had not read the memo about Min() and Max()
being macros with multiple-evaluation hazards. Neither of these
quite seem worth back-patching.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/3126727.1674759248@sss.pgh.pa.us
Avoid having walreceiver code know explicitly about the precision
and underlying datatype of TimestampTz. (There is still one
calculation that knows that, which should be replaced with use of
TimestampDifferenceMilliseconds; but we need to figure out what to do
about overflow cases first.)
In support of this, provide a TimestampTzPlusSeconds macro, as well
as TIMESTAMP_INFINITY and TIMESTAMP_MINUS_INFINITY macros. (We could
have used the existing DT_NOEND and DT_NOBEGIN symbols, but I judged
those too opaque and confusing.)
Move GetCurrentTimestamp calls so that it's more obvious that we
are not using stale values of "now" anyplace. This doesn't result
in net more calls, and might indeed make for net fewer.
Avoid having a dummy value in the WalRcvWakeupReason enum, so that
we can hope for the compiler to catch overlooked switch cases.
Nathan Bossart and Tom Lane
Discussion: https://postgr.es/m/20230125235004.GA1327755@nathanxps13
When auto_explain.log_verbose is on, auto_explain should print in the
logs plans equivalent to the EXPLAIN (VERBOSE). However, when
compute_query_id is on, query identifiers were not showing up, being
only handled by EXPLAIN (VERBOSE). This brings auto_explain on par with
EXPLAIN regarding that. Note that like EXPLAIN, auto_explain does not
show the query identifier when compute_query_id=regress.
The change is done so as the choice of printing the query identifier is
done in ExplainPrintPlan() rather than in ExplainOnePlan(), to avoid a
duplication of the logic dealing with the query ID. auto_explain is the
only in-core caller of ExplainPrintPlan().
While looking at the area, I have noticed that more consolidation
between EXPLAIN and auto_explain would be in order for the logging of
the plan duration and the buffer usage. This refactoring is left as a
future change.
Author: Atsushi Torikoshi
Reviewed-by: Justin Pryzby, Julien Rouhaud
Discussion: https://postgr.es/m/1ea21936981f161bccfce05765c03bee@oss.nttdata.com
If the final chunk of an oversized tuple being written out to disk was
exactly 32760 bytes, it would be corrupted due to a fencepost bug.
Bug #17619. Back-patch to 11 where the code arrived.
While testing that (see test module in archives), I (tmunro) noticed
that the per-participant page counter was not initialized to zero as it
should have been; that wasn't a live bug when it was written since DSM
memory was originally always zeroed, but since 14
min_dynamic_shared_memory might be configured and it supplies non-zeroed
memory, so that is also fixed here.
Author: Dmitry Astapov <dastapov@gmail.com>
Discussion: https://postgr.es/m/17619-0de62ceda812b8b5%40postgresql.org
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Invent separate macros for "invalid" values of these types, so that
we needn't embed knowledge of their representations into calling code.
These are all zeroes anyway ATM, so this is not fixing any live bug,
but it makes the code cleaner and more future-proof.
I (tgl) also chose to move DSM_HANDLE_INVALID into dsm_impl.h,
since it seems like it should live beside the typedef for dsm_handle.
Hou Zhijie, Nathan Bossart, Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/OS0PR01MB5716860B1454C34E5B179B6694C99@OS0PR01MB5716.jpnprd01.prod.outlook.com
Modify the new event loop code from commit 7389aad6 so that it checks
for work requested by signal handlers even if it doesn't see a latch
event yet.
This gives priority to shutdown and reload requests where the latch will
be reported later in the event array, or in a later call to
WaitEventSetWait(), due to scheduling details. In particular, this
guarantees that a SIGHUP-then-connect sequence (as seen in
authentication tests) causes the postmaster to process the reload before
accepting the connection. If the WaitEventSetWait() call saw the socket
as ready, and the reload signal was generated before the connection,
then the latest time the signal handler should be able to run is after
poll/epoll_wait/kevent returns but before we check the
pending_pm_reload_request flag.
While here, also shift the handling of child exit below reload requests,
per Tom Lane's observation that that might start new processes, so we
should make sure we pick up new settings first.
This probably explains the one-off failure of build farm animal
malleefowl.
Reported-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/OS0PR01MB57163D3BF2AB42ECAA94E5C394C29%40OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, a CREATEROLE user without SUPERUSER could not alter
REPLICATION users in any way, and could not set the BYPASSRLS
attribute. However, they could manipulate the CREATEDB property
even if they themselves did not possess it.
With this change, a CREATEROLE user without SUPERUSER can set or
clear the REPLICATION, BYPASSRLS, or CREATEDB property on a new
role or a role that they have rights to manage if and only if
that property is set for their own role.
This implements the standard idea that you can't give permissions
you don't have (but you can give the ones you do have). We might
in the future want to provide more powerful ways to constrain
what a CREATEROLE user can do - for example, to limit whether
CONNECTION LIMIT can be set or the values to which it can be set -
but that is left as future work.
Patch by me, reviewed by Nathan Bossart, Tushar Ahuja, and Neha
Sharma.
Discussion: http://postgr.es/m/CA+TgmobX=LHg_J5aT=0pi9gJy=JdtrUVGAu0zhr-i5v5nNbJDg@mail.gmail.com
The drop database command waits for the logical replication sync worker to
accept ProcSignalBarrier and the worker's slot creation waits for the drop
database to finish which leads to a deadlock. This happens because the
tablesync worker holds interrupts while creating a slot.
We prevent cancel/die interrupts while creating a slot in the table sync
worker because it is possible that before the server finishes this
command, a concurrent drop subscription happens which would complete
without removing this slot and that leads to the slot existing until the
end of walsender. However, the slot will eventually get dropped at the
walsender exit time, so there is no danger of the dangling slot.
This patch reallows cancel/die interrupts while creating a slot and
modifies the test to wait for slots to become zero to prevent finding an
ephemeral slot.
The reported hang doesn't happen in PG14 as the drop database starts to
wait for ProcSignalBarrier with PG15 (commits 4eb2176318 and e2f65f4255)
but it is good to backpatch this till PG14 as it is not a good idea to
prevent interrupts during a network call that could block indefinitely.
Reported-by: Lakshmi Narayanan Sreethar
Diagnosed-by: Andres Freund
Author: Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 14, where it was introduced in commit 6b67d72b60
Discussion: https://postgr.es/m/CA+kvmZELXQ4ZD3U=XCXuG3KvFgkuPoN1QrEj8c-rMRodrLOnsg@mail.gmail.com
In contrast to the changes to dblink and postgres_fdw, this does not fix a
bug, as libpqwalreceiver did already process interrupts.
Besides reducing code duplication, the conversion leads to libpqwalreceiver
now using reserving file descriptors for libpq connections. While not strictly
required for the use in walreceiver, we are also using libpqwalreceiver for
logical replication, where it does seem more important.
Even if we eventually decide to backpatch the prior commits, there'd be no
need to backpatch this commit, due to not fixing an active bug.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
7fcbf6a and 2ff6555 changed the function signature of XLogPageRead()
but did not update the comment.
XLogReaderRoutine contains up to date information about the API, so no
need to repeat all that at XLogPageRead(), but fix the mentions of the
no longer existing function arguments.
This enhances the numeric type input function, adding support for
hexadecimal, octal, and binary integers of any size, up to the limits
of the numeric type.
Since 6fcda9aba8, such non-decimal integers have been accepted by the
parser as integer literals and passed through to numeric_in(). This
commit gives numeric_in() the ability to handle them.
While at it, simplify the handling of NaN and infinities, reducing the
number of calls to pg_strncasecmp(), and arrange for pg_strncasecmp()
to not be called at all for regular numbers. This gives a significant
performance improvement for decimal inputs, more than offsetting the
small performance hit of checking for non-decimal input.
Discussion: https://postgr.es/m/CAEZATCV8XShnmT9HZy25C%2Bo78CVOFmUN5EM9FRAZ5xvYTggPMg%40mail.gmail.com
An upcoming patch by Melanie Plageman does some refactoring work in this
area. Run pgindent on that file now before making any changes so that
it's easier to maintain/evolve each of the individual patches doing the
refactor work. Additionally, add a few new required typedefs to the list
to make it easier to do future pgindent runs on this file during the
refactor work.
Discussion: https://postgr.es/m/CAAKRu_YSOnhKsDyFcqJsKtBSrd32DP-jjXmv7hL0BPD-z0TGXQ@mail.gmail.com
Commit c4649cce39 removed the "shared" and "ntapes" arguments, but the
comment still talked about "shared". It also talked about "a shared
file handle", which was technically correct because even before commit
c4649cce39, the "shared file handle" referred to the "fileset"
argument, not "shared". But it was very confusing. Improve the
comment.
Also add a comment on what the "preallocate" argument does.
Backpatch to v15, just to make backpatching other patches easier in
the future.
Discussion: https://www.postgresql.org/message-id/af989685-91d5-aad4-8f60-1d066b5ec309@enterprisedb.com
Reviewed-by: Peter Eisentraut
This adds combine, serial and deserial functions for the array_agg() and
string_agg() aggregate functions, thus allowing these aggregates to
partake in partial aggregations. This allows both parallel aggregation to
take place when these aggregates are present and also allows additional
partition-wise aggregation plan shapes to include plans that require
additional aggregation once the partially aggregated results from the
partitions have been combined.
Author: David Rowley
Reviewed-by: Andres Freund, Tomas Vondra, Stephen Frost, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9sx_6GTcvd6TMuZnNtCh0VhBzhX6FZqw17TgVFH-ga_A@mail.gmail.com
Enforce wal_retrieve_retry_interval on a per-subscription basis,
rather than globally, and arrange to skip that delay in case of
an intentional worker exit. This probably makes little difference
in the field, where apply workers wouldn't be restarted often;
but it has a significant impact on the runtime of our logical
replication regression tests (even though those tests use
artificially-small wal_retrieve_retry_interval settings already).
Nathan Bossart, with mostly-cosmetic editorialization by me
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
These are all not necessary from a correctness POV. However, in the near
future instr_time will be simplified to an int64, at which point gcc would
otherwise start to warn about the changed places.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230116023639.rn36vf6ajqmfciua@awork3.anarazel.de
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
This is in preparation for adding a new reserved_connections GUC,
but aligning the GUC name with the variable name is also a good
idea on general principle.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Commit ea92368cd1 made max_wal_senders
a separate pool of backends from max_connections, but the documentation
and error message for superuser_reserved_connections weren't updated
at the time, and as a result are somewhat misleading. Update.
This is arguably a back-patchable bug fix, but because it seems quite
minor, no back-patch.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
While pg_hba.conf has support for non-literal username matches, and
this commit extends the capabilities that are supported for the
PostgreSQL user listed in an ident entry part of pg_ident.conf, with
support for:
1. The "all" keyword, where all the requested users are allowed.
2. Membership checks using the + prefix.
3. Using a regex to match against multiple roles.
1. is a feature that has been requested by Jelte Fennema, 2. something
that has been mentioned independently by Andrew Dunstan, and 3. is
something I came up with while discussing how to extend the first one,
whose implementation is facilitated by 8fea868.
This allows matching certain system users against many different
postgres users with a single line in pg_ident.conf. Without this, one
would need one line for each of the postgres users that a system user
can log in as, which can be cumbersome to maintain.
Tests are added to the TAP test of peer authentication to provide
coverage for all that.
Note that this introduces a set of backward-incompatible changes to be
able to detect the new patterns, for the following cases:
- A role named "all".
- A role prefixed with '+' characters, which is something that would not
have worked in HBA entries anyway.
- A role prefixed by a slash character, similarly to 8fea868.
Any of these can be still be handled by using quotes in the Postgres
role defined in an ident entry.
A huge advantage of this change is that the code applies the same checks
for the Postgres roles in HBA and ident entries, via the common routine
check_role().
**This compatibility change should be mentioned in the release notes.**
Author: Jelte Fennema
Discussion: https://postgr.es/m/DBBPR83MB0507FEC2E8965012990A80D0F7FC9@DBBPR83MB0507.EURPRD83.prod.outlook.com
This adjusts a few places which were appending a string constant
containing spaces onto a StringInfo. We have appendStringInfoSpaces for
that job, so let's use that instead.
For the change to jsonb.c's add_indent() function, appendStringInfoString
was being called inside a loop to append 4 spaces on each loop. This
meant that enlargeStringInfo would get called once per loop. Here it
should be much more efficient to get rid of the loop and just calculate
the number of spaces with "level * 4" and just append all the spaces in
one go.
Here we additionally adjust the appendStringInfoSpaces function so it
makes use of memset rather than a while loop to apply the required spaces
to the StringInfo. One of the problems with the while loop was that it
was incrementing one variable and decrementing another variable once per
loop. That's more work than what's required to get the job done. We may
as well use memset for this rather than trying to optimize the existing
loop. Some testing has shown memset is faster even for very small sizes.
Discussion: https://postgr.es/m/CAApHDvp_rKkvwudBKgBHniNRg67bzXVjyvVKfX0G2zS967K43A@mail.gmail.com
Peter Eisentraut
Amit Kapila
Jeff Davis
Tom Lane
Michael Paquier
Daniel Gustafsson
Noah Misch
Andres Freund
Peter Geoghegan
Thomas Munro
Alexander Korotkov
David Rowley
Tomas Vondra
Andrew Dunstan
Dean Rasheed
Robert Haas
Alvaro Herrera
John Naylor
Heikki Linnakangas