This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
The test previously had a list of OSes that direct I/O was expected to
work on. That worked well enough for the systems in our build farm, but
didn't survive contact with the Debian build bots running on tmpfs via
overlayfs. tmpfs does not support O_DIRECT, but we don't want to
exclude Linux generally.
The new approach is to try to create an empty file with O_DIRECT from
Perl first. If that fails, we'll skip the test and report what the
error was.
Reported-by: Christoph Berg <myon@debian.org>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/ZDYd4A78cT2ULxZZ%40msg.df7cb.de
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
At least one slow buildfarm system (hoverfly) showed that the database
creation was not replicated before we try to create logical replication slots
on the standby, in that database.
Reported-by: Noah Misch <noah@leadboat.com>
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/20230411053657.GA1177147@rfd.leadboat.com
There's no need to check if opt->arg is NULL since defGetString() already
does that and raises an ERROR if it is. Let's just remove that check.
Also, combine the two remaining ERRORs into a single check. It seems
better to give an indication about what sort of values we're looking for
rather than just to state that the value given isn't valid. Make
BUFFER_USAGE_LIMIT uppercase in this ERROR message too. It's already
upper case in one other error message, so make that consistent.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230411.102335.1643720544536884844.horikyota.ntt@gmail.com
Checking for the required versions of IO::Pty as well as IPC::Run
can be achieved with a single eval call, and by using the VERSION
function the comparison is guaranteed to follow the same rules as
calling 'use' on the module with a version.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/6d880ea2-f8ca-f458-4dcd-a7a3e6d6cd7c@dunslane.net
The new direct I/O test deliberately uses a very small shared_buffers to
force some disk transfers without making the data set large and slow,
but ran into a problem with wal_level = minimal: log_newpage_range()
pins many buffers, leading to a few intermittent "no unpinned buffers
available" errors.
We could presumably fix that by adjusting shared_buffers, but crake
seems to be trying to tell us something interesting with these settings,
so let's just avoid wal_level = minimal in this test for now.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230408060408.n7xdwk3mxj5oykt6%40awork3.anarazel.de
Our convention for some time has been that successful tests shouldn't
print anything on stderr. A stray "diag" call violated that, and
for that matter messed up the normal TAP progress display.
IPC::Run versions prior to 0.98 cause the interactive session to time out,
so SKIP the test in case these versions are detected (they are within the
base requirement for our TAP tests in general). Error reported by the BF
and investigation by Tom Lane.
Discussion: https://postgr.es/m/414A86BD-986B-48A7-A1E4-EEBCE5AF08CB@yesql.se
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Needed for logical decoding on a standby. Slots need to be invalidated because
of the horizon if rows required for logical decoding are removed. If the
primary's wal_level is lowered from 'logical', logical slots on the standby
need to be invalidated.
The new invalidation methods will be used in a subsequent commit.
Logical slots that have been invalidated can be identified via the new
pg_replication_slots.conflicting column.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the new pg_replication_slots column.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
a9c70b46db and 8aaa04b32S added counting of IO operations to a new view,
pg_stat_io. Now, add IO timing for reads, writes, extends, and fsyncs to
pg_stat_io as well.
This combines the tracking for pgBufferUsage with the tracking for pg_stat_io
into a new function pgstat_count_io_op_time(). This should make it a bit
easier to avoid the somewhat costly instr_time conversion done for
pgBufferUsage.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ay5iKmnbXZ3DsauViF3eMxu4m1oNnJXqV_HyqYeg55Ww%40mail.gmail.com
Similar to 8dff2f224, this disables DNS lookups by the Kerberos library
to look up the KDC and the realm while the Kerberos tests are running.
In some environments, these lookups can take a long time and end up
timing out and causing tests to fail. Further, since this isn't really
our domain, we shouldn't be sending out these DNS requests during our
tests.
A few buildfarm animals recently started complaining about the "child"
relation already existing. e056c557ae added a new child table to inherit.sql,
but triggers.sql, running in the same parallel group, also uses a child table.
Rename the new table to inh_child. It maybe worth renaming child, parent in
other tests as well, but that's work for another day.
Discussion: https://postgr.es/m/20230407204530.52q3v5cu5x6dj676@awork3.anarazel.de
This breaks out the background and interactive psql functionality into a
new class, PostgreSQL::Test::BackgroundPsql. Sessions are still initiated
via PostgreSQL::Test::Cluster, but once started they can be manipulated by
the new helper functions which intend to make querying easier. A sample
session for a command which can be expected to finish at a later time can
be seen below.
my $session = $node->background_psql('postgres');
$bsession->query_until(qr/start/, q(
\echo start
CREATE INDEX CONCURRENTLY idx ON t(a);
));
$bsession->quit;
Patch by Andres Freund with some additional hacking by me.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20230130194350.zj5v467x4jgqt3d6@awork3.anarazel.de
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
The tests added by commits 029dea882 et al turn out to produce
different output under -DRANDOMIZE_ALLOCATED_MEMORY. This is
not a bug exactly: that flag causes coerce_type() to invoke
the input function twice when coercing an unknown-type literal
to a specific type. So you get tsqueryin's bleat about an empty
tsquery twice. Revise the test query to avoid that.
Discussion: https://postgr.es/m/20230406213813.uep7plg6lvcywujo@awork3.anarazel.de
tsquery's GETQUERY() macro is only safe to apply to a tsquery
that is known non-empty; otherwise it gives a pointer to garbage.
Before commit 5a617d75d, ts_headline() avoided this pitfall, but
only in a very indirect, nonobvious way. (hlCover could not reach
its TS_execute call, because if the query contains no lexemes
then hlFirstIndex would surely return -1.) After that commit,
it fell into the trap, resulting in weird errors such as
"unrecognized operator" and/or valgrind complaints. In HEAD,
fix this by not calling TS_execute_locations() at all for an
empty query. In the back branches, add a defensive check to
hlCover() --- that's not fixing any live bug, but I judge the
code a bit too fragile as-is.
Also, both mark_hl_fragments() and mark_hl_words() were careless
about the possibility of empty search text: in the cases where
no match has been found, they'd end up telling mark_fragment() to
mark from word indexes 0 to 0 inclusive, even when there is no
word 0. This is harmless since we over-allocated the prs->words
array, but it does annoy valgrind. Fix so that the end index is -1
and thus mark_fragment() will do nothing in such cases.
Bottom line is that this fixes a live bug in HEAD, but in the
back branches it's only getting rid of a valgrind nitpick.
Back-patch anyway.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/c27f642d-020b-01ff-ae61-086af287c4fd@gmail.com
\watch can now be told to stop after N executions of the query.
With the idea that we might want to add more options to \watch
in future, this patch generalizes the command's syntax to a list
of name=value options, with the interval allowed to omit the name
for backwards compatibility.
Andrey Borodin, reviewed by Kyotaro Horiguchi, Nathan Bossart,
Michael Paquier, Yugo Nagata, and myself
Discussion: https://postgr.es/m/CAAhFRxiZ2-n_L1ErMm9AZjgmUK=qS6VHb+0SaMn8sqqbhF7How@mail.gmail.com
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
Merge and hash joins can support antijoin with the non-nullable input
on the right, using very simple combinations of their existing logic
for right join and anti join. This gives the planner more freedom
about how to order the join. It's particularly useful for hash join,
since we may now have the option to hash the smaller table instead
of the larger.
Richard Guo, reviewed by Ronan Dunklau and myself
Discussion: https://postgr.es/m/CAMbWs48xh9hMzXzSy3VaPzGAz+fkxXXTUbCLohX1_L8THFRm2Q@mail.gmail.com
In v13 and v14, the ENABLE/DISABLE TRIGGER USER variant malfunctioned
on cloned triggers, failing to find the clones because it thought they
were system triggers. Other variants of ENABLE/DISABLE TRIGGER would
improperly apply a superuserness check. Fix by adjusting the is-it-
a-system-trigger check to match reality in those branches. (As far
as I can find, this is the only place that got it wrong.)
There's no such bug in v15/HEAD, because we revised the catalog
representation of system triggers to be what this code was expecting.
However, add the test case to these branches anyway, because this area
is visibly pretty fragile. Also remove an obsoleted comment.
The recent v15/HEAD commit 6949b921d fixed a nearby bug. I now see
that my commit message for that was inaccurate: the behavior of
recursing to clone triggers is older than v15, but it didn't apply
to the case in v13/v14 because in those branches parent partitioned
tables have no pg_trigger entries for foreign-key triggers. But add
the test case from that commit to v13/v14, just to show what is
happening there.
Per bug #17886 from DzmitryH.
Discussion: https://postgr.es/m/17886-5406d5d828aa4aa3@postgresql.org
Convert to BCP47 language tags before storing in the catalog, except
during binary upgrade or when the locale comes from an existing
collation or template database.
The resulting language tags can vary slightly between ICU
versions. For instance, "@colBackwards=yes" is converted to
"und-u-kb-true" in older versions of ICU, and to the simpler (but
equivalent) "und-u-kb" in newer versions.
The process of canonicalizing to a language tag also understands more
input locale string formats than ucol_open(). For instance,
"fr_CA.UTF-8" is misinterpreted by ucol_open() and the region is
ignored; effectively treating it the same as the locale "fr" and
opening the wrong collator. Canonicalization properly interprets the
language and region, resulting in the language tag "fr-CA", which can
then be understood by ucol_open().
This commit fixes a problem in prior versions due to ucol_open()
misinterpreting locale strings as described above. For instance,
creating an ICU collation with locale "fr_CA.UTF-8" would store that
string directly in the catalog, which would later be passed to (and
misinterpreted by) ucol_open(). After this commit, the locale string
will be canonicalized to language tag "fr-CA" in the catalog, which
will be properly understood by ucol_open(). Because this fix affects
the resulting collator, we cannot change the locale string stored in
the catalog for existing databases or collations; otherwise we'd risk
corrupting indexes. Therefore, only canonicalize locales for
newly-created (not upgraded) collations/databases. For similar
reasons, do not backport.
Discussion: https://postgr.es/m/8c7af6820aed94dc7bc259d2aa7f9663518e6137.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Invent "GET DIAGNOSTICS oid_variable = PG_ROUTINE_OID".
This is useful for avoiding the maintenance nuisances that come
with embedding a function's name in its body, as one might do
for logging purposes for example. Typically users would cast the
result to regproc or regprocedure to get something human-readable,
but we won't pre-judge whether that's appropriate.
Pavel Stehule, reviewed by Kirk Wolak and myself
Discussion: https://postgr.es/m/CAFj8pRA4zMd5pY-B89Gm64bDLRt-L+akOd34aD1j4PEstHHSVQ@mail.gmail.com
This option is normally false, but can be set to true to obtain
the legacy behavior where the subscription runs with the permissions
of the subscription owner rather than the permissions of the
table owner. The advantages of this mode are (1) it doesn't require
that the subscription owner have permission to SET ROLE to each
table owner and (2) since no role switching occurs, the
SECURITY_RESTRICTED_OPERATION restrictions do not apply.
On the downside, it allows any table owner to easily usurp
the privileges of the subscription owner - basically, to take
over their account. Because that's generally quite undesirable,
we don't make this mode the default, but we do make it available,
just in case the new behavior causes too many problems for someone.
Discussion: http://postgr.es/m/CA+TgmoZ-WEeG6Z14AfH7KhmpX2eFh+tZ0z+vf0=eMDdbda269g@mail.gmail.com
Up until now, logical replication actions have been performed as the
subscription owner, who will generally be a superuser. Commit
cec57b1a0f documented hazards
associated with that situation, namely, that any user who owns a
table on the subscriber side could assume the privileges of the
subscription owner by attaching a trigger, expression index, or
some other kind of executable code to it. As a remedy, it suggested
not creating configurations where users who are not fully trusted
own tables on the subscriber.
Although that will work, it basically precludes using logical
replication in the way that people typically want to use it,
namely, to replicate a database from one node to another
without necessarily having any restrictions on which database
users can own tables. So, instead, change logical replication to
execute INSERT, UPDATE, DELETE, and TRUNCATE operations as the
table owner when they are replicated.
Since this involves switching the active user frequently within
a session that is authenticated as the subscription user, also
impose SECURITY_RESTRICTED_OPERATION restrictions on logical
replication code. As an exception, if the table owner can SET
ROLE to the subscription owner, these restrictions have no
security value, so don't impose them in that case.
Subscription owners are now required to have the ability to
SET ROLE to every role that owns a table that the subscription
is replicating. If they don't, replication will fail. Superusers,
who normally own subscriptions, satisfy this property by default.
Non-superusers users who own subscriptions will need to be
granted the roles that own relevant tables.
Patch by me, reviewed (but not necessarily in its entirety) by
Jelte Fennema, Jeff Davis, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoaSCkg9ww9oppPqqs+9RVqCexYCE6Aq=UsYPfnOoDeFkw@mail.gmail.com
Oversight in f2698ea02c, which introduced
the variable. This lowers some 1000s timeouts to the configurable
default of 180s, due to a lack of evidence for needing the longer
timeout. The alternative was 6*PG_TEST_TIMEOUT_DEFAULT, which we can
adopt if the need arises. Given the lack of observed trouble with these
timeouts, no back-patch.
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
I realized that the third overflow case I posited in commit b0e9e4d76
actually should be handled in a different way: rather than tolerating
the idea that the quotient could round to 1, we should clamp so that
the output cannot be more than "count" when we know that the operand is
less than bound2. That being the case, we don't need an overflow-aware
increment in that code path, which leads me to revert the movement of
the pg_add_s32_overflow() call. (The diff in width_bucket_float8
might be easier to read by comparing against b0e9e4d76^.)
What's more, width_bucket_numeric also has this problem of the quotient
potentially rounding to 1, so add a clamp there too.
As before, I'm not quite convinced that a back-patch is warranted.
Discussion: https://postgr.es/m/391415.1680268470@sss.pgh.pa.us
Up through v11 it was sensible to use the "oid" system column as
a foreign key column, but since that was removed there's no visible
usefulness in making any of the remaining system columns a foreign
key. Moreover, since the TupleTableSlot rewrites in v12, such cases
actively fail because of implicit assumptions that only user columns
appear in foreign keys. The lack of complaints about that seems
like good evidence that no one is trying to do it. Hence, rather
than trying to repair those assumptions (of which there are at least
two, maybe more), let's just forbid the case up front.
Per this patch, a system column in either the referenced or
referencing side of a foreign key will draw this error; however,
putting one in the referenced side would have failed later anyway,
since we don't allow unique indexes to be made on system columns.
Per bug #17877 from Alexander Lakhin. Back-patch to v12; the
case still appears to work in v11, so we shouldn't break it there.
Discussion: https://postgr.es/m/17877-4bcc658e33df6de1@postgresql.org
This converts pg_regress output format to emit TAP compliant output
while keeping it as human readable as possible for use without TAP
test harnesses. As verbose harness related information isn't really
supported by TAP this also reduces the verbosity of pg_regress runs
which makes scrolling through log output in buildfarm/CI runs a bit
easier as well.
As the meson TAP parser conumes whitespace, the leading indentation
for differentiating parallel tests from sequential tests has been
changed to a single character prefix.
This patch has been around for an extended period of time, reviewers
listed below may have been involved in reviewing a version quite
different from the version in this commit. The original idea for
this patch was a hacking session with Jinbao Chen.
TAP format testing is also enabled in meson as of this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nikolay Shaplov <dhyan@nataraj.su>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/BD4B107D-7E53-4794-ACBA-275BEB4327C9@yesql.se
Discussion: https://postgr.es/m/20220221164736.rq3ornzjdkmwk2wo@alap3.anarazel.de
Among other things, this should make it easier to calculate a useful cache hit
ratio by excluding buffer reads via buffer access strategies. As buffer access
strategies reuse buffers (and thus evict the prior buffer contents), it is
normal to see reads on repeated scans of the same data.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAAKRu_beMa9Hzih40%3DXPYqhDVz6tsgUGTrhZXRo%3Dunp%2Bszb%3DUA%40mail.gmail.com
Full and right outer joins were not supported in the initial
implementation of Parallel Hash Join because of deadlock hazards (see
discussion). Therefore FULL JOIN inhibited parallelism, as the other
join strategies can't do that in parallel either.
Add a new PHJ phase PHJ_BATCH_SCAN that scans for unmatched tuples on
the inner side of one batch's hash table. For now, sidestep the
deadlock problem by terminating parallelism there. The last process to
arrive at that phase emits the unmatched tuples, while others detach and
are free to go and work on other batches, if there are any, but
otherwise they finish the join early.
That unfairness is considered acceptable for now, because it's better
than no parallelism at all. The build and probe phases are run in
parallel, and the new scan-for-unmatched phase, while serial, is usually
applied to the smaller of the two relations and is either limited by
some multiple of work_mem, or it's too big and is partitioned into
batches and then the situation is improved by batch-level parallelism.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BA6ftXPz4oe92%2Bx8Er%2BxpGZqto70-Q_ERwRaSyA%3DafNg%40mail.gmail.com
This role can be granted to non-superusers to allow them to issue
CREATE SUBSCRIPTION. The non-superuser must additionally have CREATE
permissions on the database in which the subscription is to be
created.
Most forms of ALTER SUBSCRIPTION, including ALTER SUBSCRIPTION .. SKIP,
now require only that the role performing the operation own the
subscription, or inherit the privileges of the owner. However, to
use ALTER SUBSCRIPTION ... RENAME or ALTER SUBSCRIPTION ... OWNER TO,
you also need CREATE permission on the database. This is similar to
what we do for schemas. To change the owner of a schema, you must also
have permission to SET ROLE to the new owner, similar to what we do
for other object types.
Non-superusers are required to specify a password for authentication
and the remote side must use the password, similar to what is required
for postgres_fdw and dblink. A superuser who wants a non-superuser to
own a subscription that does not rely on password authentication may
set the new password_required=false property on that subscription. A
non-superuser may not set password_required=false and may not modify a
subscription that already has password_required=false.
This new password_required subscription property works much like the
eponymous postgres_fdw property. In both cases, the actual semantics
are that a password is not required if either (1) the property is set
to false or (2) the relevant user is the superuser.
Patch by me, reviewed by Andres Freund, Jeff Davis, Mark Dilger,
and Stephen Frost (but some of those people did not fully endorse
all of the decisions that the patch makes).
Discussion: http://postgr.es/m/CA+TgmoaDH=0Xj7OBiQnsHTKcF2c4L+=gzPBUKSJLh8zed2_+Dg@mail.gmail.com
The original coding of this function paid little attention to the
possibility of overflow. There were actually three different hazards:
1. The range from bound1 to bound2 could exceed DBL_MAX, which on
IEEE-compliant machines produces +Infinity in the subtraction.
At best we'd lose all precision in the result, and at worst
produce NaN due to dividing Inf/Inf. The range can't exceed
twice DBL_MAX though, so we can fix this case by scaling all the
inputs by 0.5.
2. We computed count * (operand - bound1), which is also at risk of
float overflow, before dividing. Safer is to do the division first,
producing a quotient that should be in [0,1), and even after allowing
for roundoff error can't be outside [0,1]; then multiplying by count
can't produce a result overflowing an int. (width_bucket_numeric does
the multiplication first on the grounds that that improves accuracy of
its result, but I don't think that a similar argument can be made in
float arithmetic.)
3. If the division result does round to 1, and count is INT_MAX,
the final addition of 1 would overflow an int. We took care
of that in the operand >= bound2 case but did not consider that
it could be possible in the main path. Fix that by moving the
overflow-aware addition of 1 so it is done that way in all cases.
The fix for point 2 creates a possibility that values very close to
a bucket boundary will be rounded differently than they were before.
I'm not troubled by that for HEAD, but it is an argument against
putting this into the stable branches. Given that the cases being
fixed here are fairly extreme and unlikely to be hit in normal use,
it seems best not to back-patch.
Mats Kindahl and Tom Lane
Discussion: https://postgr.es/m/17876-61f280d1601f978d@postgresql.org
This adds support for load balancing connections with libpq using a
connection parameter: load_balance_hosts=<string>. When setting the
param to random, hosts and addresses will be connected to in random
order. This then results in load balancing across these addresses and
hosts when multiple clients or frequent connection setups are used.
The randomization employed performs two levels of shuffling:
1. The given hosts are randomly shuffled, before resolving them
one-by-one.
2. Once a host its addresses get resolved, the returned addresses
are shuffled, before trying to connect to them one-by-one.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
When there are multiple publications for a subscription and one of those
publishes via the parent table by using publish_via_partition_root and the
other one directly publishes the child table, we end up copying the same
data twice during initial synchronization. The reason for this was that we
get both the parent and child tables from the publisher and try to copy
the data for both of them.
This patch extends the function pg_get_publication_tables() to take a
publication list as its input parameter. This allows us to exclude a
partition table whose ancestor is published by the same publication list.
This problem does exist in back-branches but we decide to fix it there in
a separate commit if required. The fix for back-branches requires quite
complicated changes to fetch the required table information from the
publisher as we can't update the function pg_get_publication_tables() in
back-branches. We are not sure whether we want to deviate and complicate
the code in back-branches for this problem as there are no field reports
yet.
Author: Wang wei
Reviewed-by: Peter Smith, Jacob Champion, Kuroda Hayato, Vignesh C, Osumi Takamichi, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
MERGE planning could fail with "variable not found in subplan target
list" if the target table is partitioned and all its partitions are
excluded at plan time, or in the case where it has no partitions but
used to have some. This happened because distribute_row_identity_vars
thought it didn't need to make the target table's reltarget list
fully valid; but if we generate a join plan then that is required
because the dummy Result node's tlist will be made from the reltarget.
The same logic appears in distribute_row_identity_vars in v14,
but AFAICS the problem is unreachable in that branch for lack of
MERGE. In other updating statements, the target table is always
inner-joined to any other tables, so if the target is known dummy
then the whole plan reduces to dummy, so no join nodes are created.
So I'll refrain from back-patching this code change to v14 for now.
Per report from Alvaro Herrera.
Discussion: https://postgr.es/m/20230328112248.6as34mlx5sr4kltg@alvherre.pgsql
find_composite_type_dependencies() ignored indexes, which is a poor
decision because an expression index could have a stored column of
a composite (or other container) type even when the underlying table
does not. Teach it to detect such cases and error out. We have to
work a bit harder than for other relations because the pg_depend entry
won't identify the specific index column of concern, but it's not much
new code.
This does not address bug #17872's original complaint that dropping
a column in such a type might lead to violations of the uniqueness
property that a unique index is supposed to ensure. That seems of
much less concern to me because it won't lead to crashes.
Per bug #17872 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17872-d0fbb799dc3fd85d@postgresql.org
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
Add pgstat counter to track row updates that result in the successor
version going to a new heap page, leaving behind an original version
whose t_ctid points to the new version. The current count is shown by
the n_tup_newpage_upd column of each of the pg_stat_*_tables views.
The new n_tup_newpage_upd column complements the existing n_tup_hot_upd
and n_tup_upd columns. Tables that have high n_tup_newpage_upd values
(relative to n_tup_upd) are good candidates for tuning heap fillfactor.
Corey Huinker, with small tweaks by me.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADkLM=ded21M9iZ36hHm-vj2rE2d=zcKpUQMds__Xm2pxLfHKA@mail.gmail.com
The "und" locale is an alternative spelling of the root locale, but it
was not recognized until ICU 55. To maintain common behavior across
all supported ICU versions, check for "und" and replace with "root"
before opening.
Previously, the lack of support for "und" was dangerous, because
versions 54 and older fall back to the environment when a locale is
not found. If the user specified "und" for the language (which is
expected and documented), it could not only resolve to the wrong
collator, but it could unexpectedly change (which could lead to
corrupt indexes).
This effectively reverts commit d72900bded, which worked around the
problem for the built-in "unicode" collation, and is no longer
necessary.
Discussion: https://postgr.es/m/60da0cecfb512a78b8666b31631a636215d8ce73.camel@j-davis.com
Discussion: https://postgr.es/m/0c6fa66f2753217d2a40480a96bd2ccf023536a1.camel@j-davis.com
Reviewed-by: Peter Eisentraut
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having generated columns. We didn't use to ignore
generated columns while doing tuple comparison among the tuples from
the publisher and subscriber during apply of updates and deletes.
Author: Onder Kalaci
Reviewed-by: Shi yu, Amit Kapila
Backpatch-through: 12
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
This patch allows copying tables in the binary format during table
synchronization when the binary option for a subscription is enabled.
Previously, tables are copied in text format even if the subscription is
created with the binary option enabled. Copying tables in binary format
may reduce the time spent depending on column types.
A binary copy for initial table synchronization is supported only when
both publisher and subscriber are v16 or later.
Author: Melih Mutlu
Reviewed-by: Peter Smith, Shi yu, Euler Taveira, Vignesh C, Kuroda Hayato, Osumi Takamichi, Bharath Rupireddy, Hou Zhijie
Discussion: https://postgr.es/m/CAGPVpCQvAziCLknEnygY0v1-KBtg%2BOm-9JHJYZOnNPKFJPompw%40mail.gmail.com
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having dropped columns. We didn't use to ignore dropped
columns while doing tuple comparison among the tuples from the publisher
and subscriber during apply of updates and deletes.
Author: Onder Kalaci, Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
Counting writes only for io_context = 'normal' is unreliable, as backends
using a buffer access strategy could flush all of the dirty buffers out from
under the other backends and checkpointer. Change the test to count writes in
any context. This achieves roughly the same coverage anyway.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/ZAnWU8WbXEDjrfUE%40telsasoft.com
@extschema:name@ extends the existing @extschema@ feature so that
we can also insert the schema name of some required extension,
thus making cross-extension references robust even if they are in
different schemas.
However, this has the same hazard as @extschema@: if the schema
name is embedded literally in an installed object, rather than being
looked up once during extension script execution, then it's no longer
safe to relocate the other extension to another schema. To deal with
that without restricting things unnecessarily, add a "no_relocate"
option to extension control files. This allows an extension to
specify that it cannot handle relocation of some of its required
extensions, even if in themselves those extensions are relocatable.
We detect "no_relocate" requests of dependent extensions during
ALTER EXTENSION SET SCHEMA.
Regina Obe, reviewed by Sandro Santilli and myself
Discussion: https://postgr.es/m/003001d8f4ae$402282c0$c0678840$@pcorp.us
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
When calculating distance in brin_minmax_multi_distance_inet(), the
netmask was applied incorrectly. This results in (seemingly) incorrect
ordering of values, triggering an assert.
For builds without asserts this is mostly harmless - we may merge other
ranges, possibly resulting in slightly less efficient index. But it's
still correct and the greedy algorithm doesn't guarantee optimality
anyway.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported by Dmitry Dolgov, investigation and fix by me.
Reported-by: Dmitry Dolgov
Backpatch-through: 14
Discussion: https://postgr.es/m/17774-c6f3e36dd4471e67@postgresql.org
Add versions of timestamptz + interval, timestamptz - interval, and
generate_series(timestamptz, ...) in which a timezone can be specified
explicitly instead of defaulting to the TimeZone GUC setting.
The new functions for the first two are named date_add and
date_subtract. This might seem too generic, but we could use
overloading to add additional variants if that seems useful.
Along the way, improve the docs' pretty inadequate explanation
of how timestamptz +- interval works.
Przemysław Sztoch and Gurjeet Singh; cosmetic changes and most of
the docs work by me
Discussion: https://postgr.es/m/01a84551-48dd-1359-bf7e-f6b0203a6bd0@sztoch.pl
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
Unfortunately it turns out that the logfile-only option added in b9f8d1cbad
is only available in openldap starting in 2.6.
Luckily the option to control the log level (loglevel/-s) have been around for
much longer. As it turns out loglevel/-s only control what goes into syslog,
not what ends up in the file specified with 'logfile' and stderr.
While we currently are specifying 'logfile', nothing ends up in it, as the
option only controls debug messages, and we didn't set a debug level. The
debug level can only be configured on the commandline and also prevents
forking. That'd require larger changes, so this commit doesn't tackle that
issue.
Specify the syslog level when starting slapd using -s, as that allows to
prevent all syslog messages if one uses '0' instead of 'none', while loglevel
doesn't prevent the first message.
Discussion: https://postgr.es/m/20230311233708.3yjdbjkly2q4gq2j@awork3.anarazel.de
Backpatch: 11-
The logic added in 9d9c02ccd to determine when a qual can be used as a
WindowClause run condition failed to correctly check for subqueries in the
qual. This was being done correctly for normal subquery qual pushdowns,
it's just that 9d9c02ccd failed to follow the lead on that.
This also fixes various other cases where transforming the qual into a
WindowClause run condition in the subquery should have been disallowed.
Bug: #17826
Reported-by: Anban Company
Discussion: https://postgr.es/m/17826-7d8750952f19a5f5@postgresql.org
Backpatch-through: 15, where 9d9c02ccd was introduced.
Until now the tests using slapd spammed syslog for every connection /
query. Use logfile-only to prevent syslog activity. Unfortunately that only
takes effect after logging the first message, but that's still much better
than the prior situation.
Discussion: https://postgr.es/m/20230311233708.3yjdbjkly2q4gq2j@awork3.anarazel.de
Backpatch: 11-
create_append_path() would only apply get_baserel_parampathinfo
when the path is for a partitioned table, but it's also potentially
useful for paths for UNION ALL appendrels. Specifically, that
supports building a Memoize path atop this one.
While we're in the vicinity, delete some dead code in
create_merge_append_plan(): there's no need for it to support
parameterized MergeAppend paths, and it doesn't look like that
is going to change anytime soon. It'll be easy enough to undo
this when/if it becomes useful.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_ABSu4PWG2rE1q10tJugEXHWgru3U8dAgkoFvgrb6aEA@mail.gmail.com
DecodeDateTime and DecodeTimeOnly had support for date input in the
style "Y2023M03D16", which the comments claimed to be an "ISO" format.
However, so far as I can find there is no such format in ISO 8601;
they write units before numbers in intervals, but not in datetimes.
Furthermore, the lesser-known ISO 8601-2 spec actually defines an
incompatible format "2023Y03M16D". None of our documentation mentions
such a format either. So let's just drop it.
That leaves us with only two cases for a prefix unit specifier in
datetimes: Julian dates written as Jnnnn, and the "T" separator
defined by ISO 8601. Add checks to catch misuse of these specifiers,
that is consecutive specifiers or a dangling specifier at the end of
the string. We do not however disallow a specifier that is separated
from the field that it disambiguates (by noise words or unrelated
fields). That being the case, remove some overly-aggressive error
checks from the ISOTIME cases.
Joseph Koshakow, editorialized a bit by me; thanks also to
Peter Eisentraut for some standards-reading.
Discussion: https://postgr.es/m/CAAvxfHf2Q1gKLiHGnuPOiyf0ASvKUM4BnMfsXuwgtYEb_Gx0Zw@mail.gmail.com
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
The hook can be installed by a shared_preload library.
A similar mechanism could be used for radius paswords, for example, and
the type name auth_password_hook_typ has been shosen with that in mind.
John Naylor and Andrew Dunstan
Discussion: https://postgr.es/m/469b06ed-69de-ba59-c13a-91d2372e52a9@dunslane.net
preprocess_targetlist thought PHVs couldn't appear here.
It was mistaken, as per report from Önder Kalacı.
Surveying other pull_var_clause calls, I noted no similar errors,
but I did notice that qual_is_pushdown_safe's assertion about
!contain_window_function was pointless, because the following
pull_var_clause call would complain about them anyway. In HEAD
only, remove the redundant Assert and improve the commentary.
Discussion: https://postgr.es/m/CACawEhUuum-gC_2S3sXLTcsk7bUSPSHOD+g1ZpfKaDK-KKPPWA@mail.gmail.com
Using REPLICA IDENTITY FULL on the publisher can lead to a full table scan
per tuple change on the subscription when REPLICA IDENTITY or PK index is
not available. This makes REPLICA IDENTITY FULL impractical to use apart
from some small number of use cases.
This patch allows using indexes other than PRIMARY KEY or REPLICA
IDENTITY on the subscriber during apply of update/delete. The index that
can be used must be a btree index, not a partial index, and it must have
at least one column reference (i.e. cannot consist of only expressions).
We can uplift these restrictions in the future. There is no smart
mechanism to pick the index. If there is more than one index that
satisfies these requirements, we just pick the first one. We discussed
using some of the optimizer's low-level APIs for this but ruled it out
as that can be a maintenance burden in the long run.
This patch improves the performance in the vast majority of cases and the
improvement is proportional to the amount of data in the table. However,
there could be some regression in a small number of cases where the indexes
have a lot of duplicate and dead rows. It was discussed that those are
mostly impractical cases but we can provide a table or subscription level
option to disable this feature if required.
Author: Onder Kalaci, Amit Kapila
Reviewed-by: Peter Smith, Shi yu, Hou Zhijie, Vignesh C, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/CACawEhVLqmAAyPXdHEPv1ssU2c=dqOniiGz7G73HfyS7+nGV4w@mail.gmail.com
The band-aid applied in commit f0bedf3e4 turns out to still need
some work: it made sure we didn't set Np->last_relevant too small
(to the left of the decimal point), but it didn't prevent setting
it too large (off the end of the partially-converted string).
This could result in fetching data beyond the end of the allocated
space, which with very bad luck could cause a SIGSEGV, though
I don't see any hazard of interesting memory disclosure.
Per bug #17839 from Thiago Nunes. The bug's pretty ancient,
so back-patch to all supported versions.
Discussion: https://postgr.es/m/17839-aada50db24d7b0da@postgresql.org
Expose the standard error functions as SQL-callable functions. These
are expected to be useful to people working with normal distributions,
and we use them here to test the distribution from random_normal().
Since these functions are defined in the POSIX and C99 standards, they
should in theory be available on all supported platforms. If that
turns out not to be the case, more work will be needed.
On all platforms tested so far, using extra_float_digits = -1 in the
regression tests is sufficient to allow for variations between
implementations. However, past experience has shown that there are
almost certainly going to be additional unexpected portability issues,
so these tests may well need further adjustments, based on the
buildfarm results.
Dean Rasheed, reviewed by Nathan Bossart and Thomas Munro.
Discussion: https://postgr.es/m/CAEZATCXv5fi7+Vu-POiyai+ucF95+YMcCMafxV+eZuN1B-=MkQ@mail.gmail.com
The new connection parameter require_auth allows a libpq client to
define a list of comma-separated acceptable authentication types for use
with the server. There is no negotiation: if the server does not
present one of the allowed authentication requests, the connection
attempt done by the client fails.
The following keywords can be defined in the list:
- password, for AUTH_REQ_PASSWORD.
- md5, for AUTH_REQ_MD5.
- gss, for AUTH_REQ_GSS[_CONT].
- sspi, for AUTH_REQ_SSPI and AUTH_REQ_GSS_CONT.
- scram-sha-256, for AUTH_REQ_SASL[_CONT|_FIN].
- creds, for AUTH_REQ_SCM_CREDS (perhaps this should be removed entirely
now).
- none, to control unauthenticated connections.
All the methods that can be defined in the list can be negated, like
"!password", in which case the server must NOT use the listed
authentication type. The special method "none" allows/disallows the use
of unauthenticated connections (but it does not govern transport-level
authentication via TLS or GSSAPI).
Internally, the patch logic is tied to check_expected_areq(), that was
used for channel_binding, ensuring that an incoming request is
compatible with conn->require_auth. It also introduces a new flag,
conn->client_finished_auth, which is set by various authentication
routines when the client side of the handshake is finished. This
signals to check_expected_areq() that an AUTH_REQ_OK from the server is
expected, and allows the client to complain if the server bypasses
authentication entirely, with for example the reception of a too-early
AUTH_REQ_OK message.
Regression tests are added in authentication TAP tests for all the
keywords supported (except "creds", because it is around only for
compatibility reasons). A new TAP script has been added for SSPI, as
there was no script dedicated to it yet. It relies on SSPI being the
default authentication method on Windows, as set by pg_regress.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, David G. Johnston, Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
The majority of error exit cases in json_lex_string() failed to
set lex->token_terminator, causing problems for the error context
reporting code: it would see token_terminator less than token_start
and do something more or less nuts. In v14 and up the end result
could be as bad as a crash in report_json_context(). Older
versions accidentally avoided that fate; but all versions produce
error context lines that are far less useful than intended,
because they'd stop at the end of the prior token instead of
continuing to where the actually-bad input is.
To fix, invent some macros that make it less notationally painful
to do the right thing. Also add documentation about what the
function is actually required to do; and in >= v14, add an assertion
in report_json_context about token_terminator being sufficiently
far advanced.
Per report from Nikolay Shaplov. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/7332649.x5DLKWyVIX@thinkpad-pgpro
check_agg_arguments_walker() supposed that it needn't descend into
the arguments of a lower-level aggregate function, but this is
just wrong in the presence of multiple levels of sub-select. The
oversight would lead to executor failures on queries that should
be rejected. (Prior to v11, they actually were rejected, thanks
to a "redundant" execution-time check.)
Per bug #17835 from Anban Company. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17835-4f29f3098b2d0ba4@postgresql.org
This allows for a string which if an input field matches causes the
column's default value to be inserted. The advantage of this is that
the default can be inserted in some rows and not others, for which
non-default data is available.
The file_fdw extension is also modified to take allow use of this
option.
Israel Barth Rubio
Discussion: https://postgr.es/m/CAO_rXXAcqesk6DsvioOZ5zmeEmpUN5ktZf-9=9yu+DTr0Xr8Uw@mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed in the case where UPDATEs or DELETEs are skipped
due to a BEFORE ROW trigger returning NULL (the INSERT case was
already handled correctly by ExecMergeNotMatched() calling
ExecInsert()).
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCU8XEmR0JWKDtyb7iZ%3DqCffxS9uyJt0iOZ4TV4RT%2Bow1w%40mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
Most of these calls were to generate some random data. These can be
replaced by appropriately adapted sha256() calls. To keep the diff
smaller, we wrap this into a helper function that produces the same
output format and length as the md5() call.
This will eventually allow these tests to pass in OpenSSL FIPS mode
(which does not allow MD5 use).
Similar work for other test suites will follow later.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/dbbd927f-ef1f-c9a1-4ec6-c759778ac852@enterprisedb.com
The 'ssl' option is of type 'combo', but we add a choice 'auto' that
simulates the behavior of a feature option. This way, openssl is used
automatically by default if present, but we retain the ability to
potentially select another ssl library.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ad65ffd1-a9a7-fda1-59c6-f7dc763c3051%40enterprisedb.com
adjust_appendrel_attrs can't transfer nullingrel labeling to a non-Var
translation expression (mainly because it's too late to wrap such an
expression in a PlaceHolderVar). I'd supposed in commit 2489d76c4
that that restriction was unreachable because we'd not attempt to push
problematic clauses down to an appendrel child relation. I forgot that
set_append_rel_size blindly converts all the parent rel's joininfo
clauses to child clauses, and that list could well contain clauses
from above a nulling outer join.
We might eventually have to devise a direct fix for this implementation
restriction, but for now it seems enough to filter out troublesome
clauses while constructing the child's joininfo list. Such clauses
are certainly not useful while constructing paths for the child rel;
they'll have to be applied later when we join the completed appendrel
to something else. So we don't need them here, and omitting them from
the list should save a few cycles while processing the child rel.
Per bug #17832 from Marko Tiikkaja.
Discussion: https://postgr.es/m/17832-d0a8106cdf1b722e@postgresql.org
This was an omission in the original creation of the module.
Also slightly adjust some wording to avoid a double "is".
Backpatch the non-meson piece of this to release 12, where the module
was introduced.
Discussion: https://postgr.es/m/be869e1c-8e3f-4cde-8609-212c899cccf9@dunslane.net
The COPY documentation is quite clear that "COPY relation TO" copies
rows from only the named table, not any inheritance children it may
have. However, if you enabled row-level security on the table then
this stopped being true, because the code forgot to apply the ONLY
modifier in the "SELECT ... FROM relation" query that it constructs
in order to allow RLS predicates to be attached. Fix that.
Report and patch by Antonin Houska (comment adjustments and test case
by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/3472.1675251957@antos
Previously, the default encoding was derived from the locale when
using libc; while the default was always UTF-8 when using ICU. That
would throw an error when the locale was not compatible with UTF-8.
This commit causes initdb to derive the default encoding from the
locale for both providers. If --no-locale is specified (or if the
locale is C or POSIX), the default encoding will be UTF-8 for ICU
(because ICU does not support SQL_ASCII) and SQL_ASCII for libc.
Per buildfarm failure on system "hoverfly" related to commit
27b62377b4.
Discussion: https://postgr.es/m/d191d5841347301a8f1238f609471ddd957fc47e.camel%40j-davis.com
Datetime input formerly accepted combinations such as
'1995-08-06 infinity', but this seems like a clear error.
Reject any combination of regular y/m/d/h/m/s fields with
these special tokens.
Joseph Koshakow, reviewed by Keisuke Kuroda and myself
Discussion: https://postgr.es/m/CAAvxfHdm8wwXwG_FFRaJ1nTHiMWb7YXS2YKCzCt8Q0a2ZoMcHg@mail.gmail.com
Stephen Frost
Thomas Munro
Andres Freund
Alvaro Herrera
David Rowley
Daniel Gustafsson
Tom Lane
Jeff Davis
Robert Haas
Noah Misch
Amit Kapila
Michael Paquier
Peter Geoghegan
Tomas Vondra
Peter Eisentraut
Andrew Dunstan
Dean Rasheed