to suppress zero-padding of "name" entries in indexes.
The alignment change is unlikely to save any space, but it is really needed
anyway to make the world safe for our widespread practice of passing plain
old C strings to functions that are declared as taking Name. In the previous
coding, the C compiler was entitled to assume that a Name pointer was
word-aligned; but we were failing to guarantee that. I think the reason
we'd not seen failures is that usually the only thing that gets done with
such a pointer is strcmp(), which is hard to optimize in a way that exploits
word-alignment. Still, some enterprising compiler guy will probably think
of a way eventually, or we might change our code in a way that exposes
more-obvious optimization opportunities.
The padding change is accomplished in one-liner fashion by declaring the
"name" index opclasses to use storage type "cstring" in pg_opclass.h.
Normally btree and hash don't allow a nondefault storage type, because they
don't have any provisions for converting the input datum to another type.
However, because name and cstring are effectively the same thing except for
padding, no conversion is needed --- we only need index_form_tuple() to treat
the datum as being cstring not name, and this is sufficient. This seems to
make for about a one-third reduction in the typical sizes of system catalog
indexes that involve "name" columns, of which we have many.
These two changes are only weakly related, but the alignment change makes
me feel safer that the padding change won't introduce problems, so I'm
committing them together.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
the associated datatype as their equality member. This means that these
opclasses can now support plain equality comparisons along with LIKE tests,
thus avoiding the need for an extra index in some applications. This
optimization was not possible when the pattern opclasses were first introduced,
because we didn't insist that text equality meant bitwise equality; but we
do now, so there is no semantic difference between regular and pattern
equality operators.
I removed the name_pattern_ops opclass altogether, since it's really useless:
name's regular comparisons are just strcmp() and are unlikely to become
something different. Instead teach indxpath.c that btree name_ops can be
used for LIKE whether or not the locale is C. This might lead to a useful
speedup in LIKE queries on the system catalogs in non-C locales.
The ~=~ and ~<>~ operators are gone altogether. (It would have been nice to
keep them for backward compatibility's sake, but since the pg_amop structure
doesn't allow multiple equality operators per opclass, there's no way.)
A not-immediately-obvious incompatibility is that the sort order within
bpchar_pattern_ops indexes changes --- it had been identical to plain
strcmp, but is now trailing-blank-insensitive. This will impact
in-place upgrades, if those ever happen.
Per discussions a couple months ago.
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
instead of calling a bunch of individual functions.
This function can also be called directly, taking a PID as an argument, to
return only the data for a single PID.
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
I never understood why initial authors GiST in pgsql choose so
stgrange signature for 'same' method:
bool *sameFn(Datum a, Datum b, bool* result)
instead of simple, logical
bool sameFn(Datum a, Datum b)
This change will break any existing GiST extension, so we still live with
it and will live.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
no particular need to do get_op_opfamily_properties() while building an
indexscan plan. Postpone that lookup until executor start. This simplifies
createplan.c a lot more than it complicates nodeIndexscan.c, and makes things
more uniform since we already had to do it that way for RowCompare
expressions. Should be a bit faster too, at least for plans that aren't
re-used many times, since we avoid palloc'ing and perhaps copying the
intermediate list data structure.
going through DatumGetPointer or some other "official" conversion macro.
Not actually a bug, since Datum the same size as pointer is the only
supported case at the moment, but good cleanup for the future.
Gavin Sherry
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
the columns it works with to be domains over the expected type, not just
exactly the expected type. In passing, fix ts_stat() the same way.
Per report from Markus Wollny.
algorithm. This is a good deal slower than our old roundoff-error-prone
code for long inputs, so we keep the old code for use in the transcendental
functions, where everything is approximate anyway. Also create a
user-accessible function div(numeric, numeric) to provide access to the
exact result of trunc(x/y) --- since the regular numeric / operator will
round off its result, simply computing that expression in SQL doesn't
reliably give the desired answer. This fixes bug #3387 and various related
corner cases, and improves the usefulness of PG for high-precision integer
arithmetic.
The places that did, eg,
(statbuf.st_mode & S_IFMT) == S_IFDIR
were correct, but there is no good reason not to use S_ISDIR() instead,
especially when that's what the other 90% of our code does. The places
that did, eg,
(statbuf.st_mode & S_IFDIR)
were flat out *wrong* and would fail in various platform-specific ways,
eg a symlink could be mistaken for a regular file on most Unixen.
The actual impact of this is probably small, since the problem cases
seem to always involve symlinks or sockets, which are unlikely to be
found in the directories that PG code might be scanning. But it's
clearly trouble waiting to happen, so patch all the way back anyway.
(There seem to be no occurrences of the mistake in 7.4.)
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
friends. Avoid double translation of some messages, ensure other messages
are exposed for translation (and make them follow the style guidelines),
avoid unsafe passing of an unpredictable message text as a format string.
except that it returns the string 'NULL', rather than a SQL null, when called
with a null argument. This is often a much more useful behavior for
constructing dynamic queries. Add more discussion to the documentation
about how to use these functions.
Brendan Jurd
a new typedef TimeOffset to represent an intermediate time value. It's
either int64 or double as appropriate, and in most usages will be measured
in microseconds or seconds the same as Timestamp. We don't call it
Timestamp, though, since the value doesn't necessarily represent an absolute
time instant.
Warren Turkal
case where there is a match to the pattern overall but the user has specified
a parenthesized subexpression and that subexpression hasn't got a match.
An example is substring('foo' from 'foo(bar)?'). This should return NULL,
since (bar) isn't matched, but it was mistakenly returning the whole-pattern
match instead (ie, 'foo'). Per bug #4044 from Rui Martins.
This has been broken since the beginning; patch in all supported versions.
The old behavior was sufficiently inconsistent that it's impossible to believe
anyone is depending on it.
that are reported as "equal" by wcscoll() are checked to see if they really
are bitwise equal, and are sorted per strcmp() if not. We made this happen
a couple of years ago in the regular code path, but it unaccountably got
left out of the Windows/UTF8 case (probably brain fade on my part at the
time). As in the prior set of changes, affected users may need to reindex
indexes on textual columns.
Backpatch as far as 8.2, which is the oldest release we are still supporting
on Windows.
pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
of the generated range condition var >= 'foo' AND var < 'fop' as being less
than what eqsel() would estimate for var = 'foo'. This is intuitively
reasonable and it gets rid of the need for some entirely ad-hoc coding we
formerly used to reject bogus estimates. The basic problem here is that
if the prefix is more than a few characters long, the two boundary values
are too close together to be distinguishable by comparison to the column
histogram, resulting in a selectivity estimate of zero, which is often
not very sane. Change motivated by an example from Peter Eisentraut.
Arguably this is a bug fix, but I'll refrain from back-patching it
for the moment.
available output buffer when presented with corrupt input. Some testing
suggests that this slows the decompression loop about 1%, which seems an
acceptable price to pay for more robustness. (Curiously, the penalty
seems to be *less* on not-very-compressible data, which I didn't expect
since the overhead per output byte ought to be more in the literal-bytes
path.)
Patch from Zdenek Kotala. I fixed a corner case and did some renaming
of variables to make the routine more readable.
were discussed last year, but we felt it was too late in the 8.3 cycle to
change the code immediately. Specifically, the patch:
* Reduces the minimum datum size to be considered for compression from
256 to 32 bytes, as suggested by Greg Stark.
* Increases the required compression rate for compressed storage from
20% to 25%, again per Greg's suggestion.
* Replaces force_input_size (size above which compression is forced)
with a maximum size to be considered for compression. It was agreed
that allowing large inputs to escape the minimum-compression-rate
requirement was not bright, and that indeed we'd rather have a knob
that acted in the other direction. I set this value to 1MB for the
moment, but it could use some performance studies to tune it.
* Adds an early-failure path to the compressor as suggested by Jan:
if it's been unable to find even one compressible substring in the
first 1KB (parameterizable), assume we're looking at incompressible
input and give up. (Possibly this logic can be improved, but I'll
commit it as-is for now.)
* Improves the toasting heuristics so that when we have very large
fields with attstorage 'x' or 'e', we will push those out to toast
storage before considering inline compression of shorter fields.
This also responds to a suggestion of Greg's, though my original
proposal for a solution was a bit off base because it didn't fix
the problem for large 'e' fields.
There was some discussion in the earlier threads of exposing some
of the compression knobs to users, perhaps even on a per-column
basis. I have not done anything about that here. It seems to me
that if we are changing around the parameters, we'd better get some
experience and be sure we are happy with the design before we set
things in stone by providing user-visible knobs.
to explicitly cast the output back to char before comparing it to a char
value, else we get the wrong result for high-bit-set characters. Found by
Rolf Jentsch. Also, fix several places where <ctype.h> functions were being
called without casting the argument to unsigned char; this is likewise
unportable, but we keep making that mistake :-(. These found by buildfarm
member salamander, which I will desperately miss if it ever goes belly-up.
left in the code though it was not meant to be provided. It represents a
security hole because unprivileged users could use it to look at (at least the
first line of) any file readable by the backend. Fortunately, this is only
possible if the backend was built with XML support, so the damage is at least
mitigated; and 8.3 probably hasn't propagated into any security-critical uses
yet anyway. Per report from Sergey Burladyan.
values into \nnn octal escape sequences. When the database encoding is
multibyte this is *necessary* to avoid generating invalidly encoded text.
Even in a single-byte encoding, the old behavior seems very hazardous ---
consider for example what happens if the text is transferred to another
database with a different encoding. Decoding would then yield some other
bytea value than what was encoded, which is surely undesirable. Per gripe
from Hernan Gonzalez.
Backpatch to 8.3, but not further. This is a bit of a judgment call, but I
make it on these grounds: pre-8.3 we don't really have much encoding safety
anyway because of the convert() function family, and we would also have much
higher risk of breaking existing apps that may not be expecting this behavior.
8.3 is still new enough that we can probably get away with making this change
in the function's behavior.
(then it means 2000 AD). Formerly we silently interpreted this as 1 BC,
which at best is unwarranted familiarity with the implementation.
It's barely possible that some app somewhere expects the old behavior,
though, so we won't back-patch this into existing release branches.
Formerly, DecodeDate attempted to verify the day-of-the-month exactly, but
it was under the misapprehension that it would know whether we were looking
at a BC year or not. In reality this check can't be made until the calling
function (eg DecodeDateTime) has processed all the fields. So, split the
BC adjustment and validity checks out into a new function ValidateDate that
is called only after processing all the fields. In passing, this patch
makes DecodeTimeOnly work for BC inputs, which it never did before.
(The historical veracity of all this is nonexistent, of course, but if
we're going to say we support proleptic Gregorian calendar then we should
do it correctly. In any case the unpatched code is broken because it could
emit dates that it would then reject on re-inputting.)
Per report from Bernd Helmle. Back-patch as far as 8.0; in 7.x we were
not using our own calendar support and so this seems a bit too risky
to put into 7.4.
and RI_FKey_keyequal_upd_fk, as well as no-longer-needed calls of
ri_BuildQueryKeyFull. Aside from saving a few cycles, this avoids needless
deadlock risks when an update is not changing the columns that participate
in an RI constraint. Per a gripe from Alexey Nalbat.
Back-patch to 8.3. Earlier releases did have a need to open the other
relation due to the way in which they retrieved information about the RI
constraint, so this problem unfortunately can't easily be improved pre-8.3.
Tom Lane and Stephan Szabo
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
the parser supplies a default typmod that can result in data loss (ie,
truncation). Currently that appears to be only CHARACTER and BIT.
We can avoid the problem by specifying the type's internal name instead
of using SQL-spec syntax. Since the queries generated here are only used
internally, there's no need to worry about portability. This problem is
new in 8.3; before we just let the parser do whatever it wanted to resolve
the operator, but 8.3 is trying to be sure that the semantics of FK checks
are consistent. Per report from Harald Fuchs.
ri_FetchConstraintInfo, to avoid a query-duration memory leak when that
routine is called by RI_FKey_keyequal_upd_fk (which isn't executed in a
short-lived context). This problem was latent when the routine was added
in February, but it didn't become serious until the varvarlena patch made
it quite likely that the fields being examined would be "toasted" (ie, have
short headers). Per report from Stephen Denne.
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
Therefore we must xmlCleanupParser(), or we risk leaving behind
dangling pointers to whatever memory context is current when xml_init()
is called. This seems to fix bug #3860, though we might still want
the more invasive solution being worked on by Alvaro.
constant ORDER/GROUP BY entries properly:
http://archives.postgresql.org/pgsql-hackers/2001-04/msg00457.php
The original solution to that was in fact no good, as demonstrated by
today's report from Martin Pitt:
http://archives.postgresql.org/pgsql-bugs/2008-01/msg00027.php
We can't use the column-number-reference format for a constant that is
a resjunk targetlist entry, a case that was unfortunately not thought of
in the original discussion. What we can do instead (which did not work
at the time, but does work in 7.3 and up) is to emit the constant with
explicit ::typename decoration, even if it otherwise wouldn't need it.
This is sufficient to keep the parser from thinking it's a column number
reference, and indeed is probably what the user must have done to get
such a thing into the querytree in the first place.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
print the index key variable or expression for that column. It was mistakenly
printing ASC/DESC/NULLS FIRST/NULLS LAST decoration too --- and not only for
the target column, but all columns. Someday we should have an option to
extract that info (and the opclass decoration as well) for a single index
column ... but today is not that day. Per bug #3829 and subsequent
discussion.
The zero-point case is sensible so far as the data structure is concerned,
so maybe we ought to allow it sometime; but right now the textual input
routines for these types don't allow it, and it seems that not all the
functions for the types are prepared to cope.
Report and patch by Merlin Moncure.
the two join variables at both ends: not only trailing rows that need not be
scanned because there cannot be a match on the other side, but initial rows
that will be scanned without possibly having a match. This allows a more
realistic estimate of startup cost to be made, per recent pgsql-performance
discussion. In passing, fix a couple of bugs that had crept into
mergejoinscansel: it was not quite up to speed for the task of estimating
descending-order scans, which is a new requirement in 8.3.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
inappropriately generic-sounding names. This is more or less free since
we already forced initdb for the next beta, and it may prevent confusion or
name conflicts (particularly at the C-global-symbol level) down the road.
Per my proposal yesterday.
if the locale has the thousands separator as "". This now matches the
to_char and psql numericlocale behavior. (Previously this data type was
basically useless for such setups.)
happened to be right up against the end of memory, per report from
Matt Magoffin. While at it, avoid useless multiple copying of string
by not depending on xmlStrncatNew.
of this seems a bit marginal, if it's useful enough to be shown in the manual
then we probably ought to support doing it without double evaluation of the
ts_rank function. Per my proposal earlier today.
uninitialized value, and avoid invoking the function nine separate
times in the pg_xmlIsNameChar macro. Should resolve buildfarm failures.
Per report from Ben Leslie.
out that it's actually quite likely that a string that is an extension of
the given prefix will sort as larger than the "greater" string our previous
code created. To provide some defense against that, do the comparisons
against a modified string instead of just the bare prefix. We tack on
"Z", "z", "y", or "9", whichever is seen as largest in the current locale.
Testing suggests that this is sufficient at least for cases involving
ASCII data.
make_greater_string() try harder to generate a string that's actually greater
than its input string. Before we just assumed that making a string that was
memcmp-greater was enough, but it is easy to generate examples where this is
not so when the locale is not C. Instead, loop until the relevant comparison
function agrees that the generated string is greater than the input.
Unfortunately this is probably not enough to guarantee that the generated
string is greater than all extensions of the input, so we cannot relax the
restriction to C locale for the LIKE/regex index optimization. But it should
at least improve the odds of getting a useful selectivity estimate in
prefix_selectivity(). Per example from Guillaume Smet.
Backpatch to 8.1, mainly because that's what the complainant is using...
negated-match operators. patternsel had been using the supplied operator as
though it were a positive-match operator, and thus obtaining a wrong result,
which was even more wrong after the caller subtracted it from 1. Seems
cleanest to give patternsel an explicit "negate" argument so that it knows
what's going on. Also install the same factorization scheme for pattern
join selectivity estimators; even though they are just stubs at the
moment, this may keep someone from making the same type of mistake when
they get filled out. Per report from Greg Mullane.
Backpatch to 8.2 --- previous releases do not show the problem because
patternsel() doesn't actually use the operator directly.
Add some more xml_init() calls that might not be necessary, but seem like a
good idea to avoid possible problems like we saw in xmlelement().
Fix unsafe assumption that you can keep using the tupledesc of a relcache
entry you don't have open.
Add missing error checks for SearchSysCache failure.
Get rid of handwritten array traversal in xpath() and O(N^2), broken-for-nulls
array access code in map_sql_value_to_xml_value(), in favor of using
deconstruct_array.
Manually adjust a lot of line breaks in places where the code is otherwise
gonna look pretty awful after pg_indent hacks it up (original author seems to
have liked to lay out code for a 200-column window).
assuming that evaluation of its input expressions won't change the state of
libxml. This requires refactoring xml_init() to not call xmlInitParser(),
since now not all of its callers want that. I also tweaked things to avoid
repeated execution of one-time-only tests inside xml_init(), though this is
mostly for clarity rather than in hopes of saving any noticeable amount of
runtime. Per report from Sheikh Amjad and subsequent discussion.
In passing, fix a couple of inadequately schema-qualified queries.
and ts_stat(), per my recent suggestion. Also add a possibly-not-needed-
but-can't-hurt check for NULL SPI_tuptable, before we try to dereference
same.
if there are zero rows to aggregate over, and the API seems both conceptually
and notationally ugly anyway. We should look for something that improves
on the tsquery-and-text-SELECT version (which is also pretty ugly but at
least it works...), but it seems that will take query infrastructure that
doesn't exist today. (Hm, I wonder if there's anything in or near SQL2003
window functions that would help?) Per discussion.
miscomputation of required palloc size. The crash could only occur if the
input contained lexemes both with and without positions, which is probably not
common in practice. The miscomputation would definitely result in wasted
space. Also fix some inconsistent coding around alignment of strings and
positions in a tsvector value; these errors could also lead to crashes given
mixed with/without position data and a machine that's picky about alignment.
And be more careful about checking for overflow of string offsets.
Patch is only against HEAD --- I have not looked to see if same bugs are
in back-branch contrib/tsearch2 code.
renumbering of encoding IDs done between 8.2 and 8.3 turns out to break 8.2
initdb and psql if they are run with an 8.3beta1 libpq.so. For the moment
we can rearrange the order of enum pg_enc to keep the same number for
everything except PG_JOHAB, which isn't a problem since there are no direct
references to it in the 8.2 programs anyway. (This does force initdb
unfortunately.)
Going forward, we want to fix things so that encoding IDs can be changed
without an ABI break, and this commit includes the changes needed to allow
libpq's encoding IDs to be treated as fully independent of the backend's.
The main issue is that libpq clients should not include pg_wchar.h or
otherwise assume they know the specific values of libpq's encoding IDs,
since they might encounter version skew between pg_wchar.h and the libpq.so
they are using. To fix, have libpq officially export functions needed for
encoding name<=>ID conversion and validity checking; it was doing this
anyway unofficially.
It's still the case that we can't renumber backend encoding IDs until the
next bump in libpq's major version number, since doing so will break the
8.2-era client programs. However the code is now prepared to avoid this
type of problem in future.
Note that initdb is no longer a libpq client: we just pull in the two
source files we need directly. The patch also fixes a few places that
were being sloppy about checking for an unrecognized encoding name.
it affects. The original coding neglected tablespace entirely (causing
the indexes to move to the database's default tablespace) and for an index
belonging to a UNIQUE or PRIMARY KEY constraint, it would actually try to
assign the parent table's reloptions to the index :-(. Per bug #3672 and
subsequent investigation.
8.0 and 8.1 did not have reloptions, but the tablespace bug is present.
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
buildfarm member grebe, I see no reason to revert the 1-byte-header-friendly
changes I made in varlena.c. Instead, tweak the code a little bit to
get more advantage out of that.
character encodings that doesn't involve calling lower(). This should
cure the performance regression in this case complained of by Guillaume
Smet. It still leaves the horrid performance for multi-byte encodings
introduced in 8.2, but there's no obvious solution for that in sight.
demonstrably necessary for text_substring() since regexp_split functions
may pass it such a value; and we might as well convert the whole file
at once. Per buildfarm results (though I wonder why most machines aren't
showing a failure).
to not cause needless copying of text datums that have 1-byte headers.
Greg Stark, in response to performance gripe from Guillaume Smet and
ITAGAKI Takahiro.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
values. The previous coding essentially assumed that x = sqrt(x*x), which
does not hold for x < 0.
Thanks to Jie Zhang at Greenplum and Gavin Sherry for reporting this
issue.
database via builtin functions, as recently discussed on -hackers.
chr() now returns a character in the database encoding. For UTF8 encoded databases
the argument is treated as a Unicode code point. For other multi-byte encodings
the argument must designate a strict ascii character, or an error is raised,
as is also the case if the argument is 0.
ascii() is adjusted so that it remains the inverse of chr().
The two argument form of convert() is gone, and the three argument form now
takes a bytea first argument and returns a bytea. To cover this loss three new
functions are introduced:
. convert_from(bytea, name) returns text - converts the first argument from the
named encoding to the database encoding
. convert_to(text, name) returns bytea - converts the first argument from the
database encoding to the named encoding
. length(bytea, name) returns int - gives the length of the first argument in
characters in the named encoding
* Defined new struct WordEntryPosVector that holds a uint16 length and a
variable size array of WordEntries. This replaces the previous
convention of a variable size uint16 array, with the first element
implying the length. WordEntryPosVector has the same layout in memory,
but is more readable in source code. The POSDATAPTR and POSDATALEN
macros are still used, though it would now be more readable to access
the fields in WordEntryPosVector directly.
* Removed needfree field from DocRepresentation. It was always set to false.
* Miscellaneous other commenting and refactoring
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
- change the alignment requirement of lexemes in TSVector slightly.
Lexeme strings were always padded to 2-byte aligned length to make sure
that if there's position array (uint16[]) it has the right alignment.
The patch changes that so that the padding is not done when there's no
positions. That makes the storage of tsvectors without positions
slightly more compact.
- added some #include "miscadmin.h" lines I missed in the earlier when I
added calls to check_stack_depth().
- Reimplement the send/recv functions, and added a comment
above them describing the on-wire format. The CRC is now recalculated in
tsquery as well per previous discussion.
- add code to check that the query tree is well-formed. It was indeed
possible to send malformed queries in binary mode, which produced all
kinds of strange results.
- make the left-field a uint32. There's no reason to
arbitrarily limit it to 16-bits, and it won't increase the disk/memory
footprint either now that QueryOperator and QueryOperand are separate
structs.
- add check_stack_depth() call to all recursive functions I found.
Some of them might have a natural limit so that you can't force
arbitrarily deep recursions, but check_stack_depth() is cheap enough
that seems best to just stick it into anything that might be a problem.
small editorization by me
- Brake the QueryItem struct into QueryOperator and QueryOperand.
Type was really the only common field between them. QueryItem still
exists, and is used in the TSQuery struct as before, but it's now a
union of the two. Many other changes fell from that, like separation
of pushval_asis function into pushValue, pushOperator and pushStop.
- Moved some structs that were for internal use only from header files
to the right .c-files.
- Moved tsvector parser to a new tsvector_parser.c file. Parser code was
about half of the size of tsvector.c, it's also used from tsquery.c, and
it has some data structures of its own, so it seems better to separate
it. Cleaned up the API so that TSVectorParserState is not accessed from
outside tsvector_parser.c.
- Separated enumerations (#defines, really) used for QueryItem.type
field and as return codes from gettoken_query. It was just accidental
code sharing.
- Removed ParseQueryNode struct used internally by makepol and friends.
push*-functions now construct QueryItems directly.
- Changed int4 variables to just ints for variables like "i" or "array
size", where the storage-size was not significant.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
checks for individual-table-size functions, since anyone in the database could
get approximate values from pg_class.relpages anyway. Allow database-size to
users with CONNECT privilege for the target database (note that this is
granted by default). Allow tablespace-size if the user has CREATE privilege
on the tablespace (which is *not* granted by default), or if the tablespace is
the default tablespace for the current database (since we treat that as
implicitly allowing use of the tablespace).
days that was obsolete the moment we had IN (SELECT ...) capability.
It's arguably a security hole since it applied no permissions check to
the table it searched, and since it was never documented anywhere,
removing it seems more appropriate than fixing it.
and pg_tablespace_size to superusers. Perhaps we could weaken the first
case to just require SELECT privilege, but that doesn't work for the
other cases, so use ownership as the common concept.
While it's not clear that TID linkage info is of any great use to a
nefarious user, it's certainly unexpected that these functions wouldn't
insist on read privileges.
byte after the last full byte of the bit array, regardless of whether that
byte was part of the valid data or not. Found by buildfarm testing.
Thanks to Stefan Kaltenbrunner for nailing down the cause.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
regexp_split_to_table() within a single query. This is only a partial
solution, as it turns out that with enough matches per string these
functions can also tickle a repalloc() misbehavior. But fixing that
is a topic for a separate patch.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
unwarranted liberties with int8 vs float8 values for these types.
Specifically, be sure to apply either hashint8 or hashfloat8 depending
on HAVE_INT64_TIMESTAMP. Per my gripe of even date.
overruns (neither of which seem likely to be exploitable as security holes,
fortunately, since the provoker can't control the data written). One of
these is due to choosing to stomp on the output of a called function, which
is bad news in any case; make it treat the called functions' results as
read-only. Avoid some unnecessary palloc/pfree traffic too; it's not
really helpful to free small temporary objects, and again this is presuming
more than it ought to about the nature of the results of called functions.
Per report from Patrick Welche and additional code-reading by Imad.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
unreserved according to the grammar. The list of unreserved words has gotten
extensive enough that the unnecessary quoting is becoming a bit of an eyesore.
To do this, add knowledge of the keyword category to keywords.c's table.
(Someday we might be able to generate keywords.c's table and the keyword lists
in gram.y from a common source.) For the moment, lie about WITH's status in
the table so it will still get quoted --- this is because of the expectation
that WITH will become reserved when the SQL recursive-queries patch gets done.
I didn't force initdb because this affects nothing on-disk; but note that a
few regression tests have changed expected output.
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
large inputs. Also cause it to error out immediately if the result will
overflow, instead of grinding through a lot of calculation first.
Per gripe from Jim Nasby.
were accepted by prior Postgres releases. This takes care of the loose end
left by the preceding patch to downgrade implicit casts-to-text. To avoid
breaking desirable behavior for array concatenation, introduce a new
polymorphic pseudo-type "anynonarray" --- the added concatenation operators
are actually text || anynonarray and anynonarray || text.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
and most especially for UTF8. Remove unnecessary special cases for bytea
processing and single-byte charset ILIKE. a ILIKE b is now processed as
lower(a) LIKE lower(b) in all cases. The code is now considerably simpler. All
comparisons are now performed byte-wise, and the text and pattern are also
advanced byte-wise where it is safe to do so - essentially where a wildcard is
not being matched.
Andrew Dunstan, from an original patch by ITAGAKI Takahiro, with ideas from
Tom Lane and Mark Mielke.
type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
what a Var node refers to. This is no longer necessary because the new
flat-range-table representation of plan trees makes it relatively easy to dig
down through child plan levels to find the original reference; and to keep
doing it that way, we'd have to store joinaliasvars lists in flattened RTEs,
as demonstrated by bug report from Leszek Trenkner. This change makes
varnoold/varoattno truly just debug aids, which wasn't quite the case before.
Perhaps we should drop them, or only have them in assert-enabled builds?
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
numerics as "oprcanhash", and make the corresponding system catalog
updates. As a result, hash indexes, hashed aggregation, and hash
joins can now be used with the numeric type. Bump the catversion.
The only tricky aspect to doing this is writing a correct hash
function: it's possible for two Numerics to be equal according to
their equality operator, but have different in-memory bit patterns.
To cope with this, the hash function doesn't consider the Numeric's
"scale" or "sign", and explictly skips any leading or trailing
zeros in the Numeric's digit buffer (the current implementation
should suppress any such zeros, but it seems unwise to rely upon
this). See discussion on pgsql-patches for more details.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
drill down into subplan targetlists to print the referent expression for an
OUTER or INNER var in an upper plan node. Hence, make it do that always, and
banish the old hack of showing "?columnN?" when things got too complicated.
Along the way, fix an EXPLAIN bug I introduced by suppressing subqueries from
execution-time range tables: get_name_for_var_field() assumed it could look at
rte->subquery to find out the real type of a RECORD var. That doesn't work
anymore, but instead we can look at the input plan of the SubqueryScan plan
node.
and quals have varno OUTER, rather than zero, to indicate a reference to
an output of their lefttree subplan. This is consistent with the way
that every other upper-level node type does it, and allows some simplifications
in setrefs.c and EXPLAIN.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
Tom Lane
Teodor Sigaev
Bruce Momjian
Alvaro Herrera
Magnus Hagander
Peter Eisentraut
Neil Conway
Andrew Dunstan