The remaining caller (lwlocks) doesn't need that facility, and we plan
to remove ImmedidateInterruptOK entirely. That means that interrupts
can't be serviced race-free and portably anyway, so there's little
reason for keeping the feature.
Reviewed-By: Heikki Linnakangas
Deadlock checking was performed inside signal handlers up to
now. While it's a remarkable feat to have made this work reliably,
it's quite complex to understand why that is the case. Partially it
worked due to the assumption that semaphores are signal safe - which
is not actually documented to be the case for sysv semaphores.
The reason we had to rely on performing this work inside signal
handlers is that semaphores aren't guaranteed to be interruptable by
signals on all platforms. But now that latches provide a somewhat
similar API, which actually has the guarantee of being interruptible,
we can avoid doing so.
Signalling between ProcSleep, ProcWakeup, ProcWaitForSignal and
ProcSendSignal is now done using latches. This increases the
likelihood of spurious wakeups. As spurious wakeup already were
possible and aren't likely to be frequent enough to be an actual
problem, this seems acceptable.
This change would allow for further simplification of the deadlock
checking, now that it doesn't have to run in a signal handler. But
even if I were motivated to do so right now, it would still be better
to do that separately. Such a cleanup shouldn't have to be reviewed a
the same time as the more fundamental changes in this commit.
There is one possible usability regression due to this commit. Namely
it is more likely than before that log_lock_waits messages are output
more than once.
Reviewed-By: Heikki Linnakangas
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Benchmarks has shown that aligning the buffer descriptor array to
cache lines is important for scalability; especially on bigger,
multi-socket, machines.
Currently the array sometimes already happens to be aligned by
happenstance, depending how large previous shared memory allocations
were. That can lead to wildly varying performance results after minor
configuration changes.
In addition to aligning the start of descriptor array, also force the
size of individual descriptors to be of a common cache line size (64
bytes). That happens to already be the case on 64bit platforms, but
this way we can change the struct BufferDesc more easily.
As the alignment primarily matters in highly concurrent workloads
which probably all are 64bit these days, and the space wastage of
element alignment would be a bit more noticeable on 32bit systems, we
don't force the stride to be cacheline sized on 32bit platforms for
now. If somebody does actual performance testing, we can reevaluate
that decision by changing the definition of BUFFERDESC_PADDED_SIZE.
Discussion: 20140202151319.GD32123@awork2.anarazel.de
Per discussion with Bruce Momjan, Tom Lane, Robert Haas, and Peter
Geoghegan.
The possibly, depending on compiler settings, generated warning was
"warning: `S_UNLOCK' redefined".
The hppa spinlock implementation doesn't follow the rules of s_lock.h
and provides a gcc specific implementation outside of the the part of
the file that's supposed to do that. It does so to avoid duplication
between the HP compiler and gcc. That unfortunately means that
S_UNLOCK is already defined when the HPPA specific section is reached.
Undefine the generic fallback S_UNLOCK definition inside the HPPA
section. That's far from pretty, but has the big advantage of being
simple. If somebody is interested to fix this in a prettier way...
This presumably got broken in the course of 0709b7ee72.
Discussion: 20150114225919.GY5245@awork2.anarazel.de
Per complaint from Tom Lane.
To do so, move InitializeLatchSupport() into the new common process
initialization functions, and add a new global variable MyLatch.
MyLatch is usable as soon InitPostmasterChild() has been called
(i.e. very early during startup). Initially it points to a process
local latch that exists in all processes. InitProcess/InitAuxiliaryProcess
then replaces that local latch with PGPROC->procLatch. During shutdown
the reverse happens.
This is primarily advantageous for two reasons: For one it simplifies
dealing with the shared process latch, especially in signal handlers,
because instead of having to check for MyProc, MyLatch can be used
unconditionally. For another, a later patch that makes FEs/BE
communication use latches, now can rely on the existence of a latch,
even before having gone through InitProcess.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Since their introduction latches have required barriers in SetLatch
and ResetLatch - but when they were introduced there wasn't any
barrier abstraction. Instead latches were documented to rely on the
callsites to provide barrier semantics.
Now that the barrier support looks halfway complete, add the necessary
barriers to both latch implementations.
Also remove a now superflous lock acquisition from syncrep.c and a
superflous (and insufficient) barrier from freelist.c. There might be
other cases that can now be simplified, but those are the only ones
I've seen on a quick scan.
We might want to backpatch this at some later point, but right now the
barrier infrastructure in the backbranches isn't totally on par with
master.
Discussion: 20150112154026.GB2092@awork2.anarazel.de
StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
The old LWLock implementation had the problem that concurrent lock
acquisitions required exclusively acquiring a spinlock. Often that
could lead to acquirers waiting behind the spinlock, even if the
actual LWLock was free.
The new implementation doesn't acquire the spinlock when acquiring the
lock itself. Instead the new atomic operations are used to atomically
manipulate the state. Only the waitqueue, used solely in the slow
path, is still protected by the spinlock. Check lwlock.c's header for
an explanation about the used algorithm.
For some common workloads on larger machines this can yield
significant performance improvements. Particularly in read mostly
workloads.
Reviewed-By: Amit Kapila and Robert Haas
Author: Andres Freund
Discussion: 20130926225545.GB26663@awork2.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
The logical decoding patchset introduced PROC_IN_LOGICAL_DECODING flag
PGXACT flag, that allows such backends to be skipped when computing
the xmin horizon/snapshots. That's fine and sensible for walsenders
streaming out logical changes, but not at all fine for SQL backends
doing logical decoding. If the latter set that flag any change they
have performed outside of logical decoding will not be regarded as
visible - which e.g. can lead to that change being vacuumed away.
Note that not setting the flag for SQL backends isn't particularly
bothersome - the SQL backend doesn't do streaming, so it only runs for
a limited amount of time.
Per buildfarm member 'tick' and Alvaro.
Backpatch to 9.4, where logical decoding was introduced.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
I missed an additional colon in previous patch. Oops. to make that mistake
less likely in the future, add comments as placeholders for unused inputs
and outputs in inline assembly.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
This reassociates a dynamic shared memory handle previous passed to
dsm_pin_mapping with the current resource owner, so that it will be
cleaned up at the end of the current query.
Patch by me. Review of the function name by Andres Freund, Amit
Kapila, Jim Nasby, Petr Jelinek, and Álvaro Herrera.
Nobody seemed concerned about this naming when it originally went in,
but there's a pending patch that implements the opposite of
dsm_keep_mapping, and the term "unkeep" was judged unpalatable.
"unpin" has existing precedent in the PostgreSQL code base, and the
English language, so use this terminology instead.
Per discussion, back-patch to 9.4.
shm_mq_sendv sends a message to the queue assembled from multiple
locations. This is expected to be used by forthcoming patches to
allow frontend/backend protocol messages to be sent via shm_mq, but
might be useful for other purposes as well.
shm_mq_set_handle associates a BackgroundWorkerHandle with an
already-existing shm_mq_handle. This solves a timing problem when
creating a shm_mq to communicate with a newly-launched background
worker: if you attach to the queue first, and the background worker
fails to start, you might block forever trying to do I/O on the queue;
but if you start the background worker first, but then die before
attaching to the queue, the background worrker might block forever
trying to do I/O on the queue. This lets you attach before starting
the worker (so that the worker is protected) and then associate the
BackgroundWorkerHandle later (so that you are also protected).
Patch by me, reviewed by Stephen Frost.
Testing by Amit Kapila, Andres Freund, and myself, with and without
other patches that also aim to improve scalability, seems to indicate
that this change is a significant win over the current value and over
smaller values such as 64. It's not clear how high we can push this
value before it starts to have negative side-effects elsewhere, but
going this far looks OK.
Several upcoming performance/scalability improvements require atomic
operations. This new API avoids the need to splatter compiler and
architecture dependent code over all the locations employing atomic
ops.
For several of the potential usages it'd be problematic to maintain
both, a atomics using implementation and one using spinlocks or
similar. In all likelihood one of the implementations would not get
tested regularly under concurrency. To avoid that scenario the new API
provides a automatic fallback of atomic operations to spinlocks. All
properties of atomic operations are maintained. This fallback -
obviously - isn't as fast as just using atomic ops, but it's not bad
either. For one of the future users the atomics ontop spinlocks
implementation was actually slightly faster than the old purely
spinlock using implementation. That's important because it reduces the
fear of regressing older platforms when improving the scalability for
new ones.
The API, loosely modeled after the C11 atomics support, currently
provides 'atomic flags' and 32 bit unsigned integers. If the platform
efficiently supports atomic 64 bit unsigned integers those are also
provided.
To implement atomics support for a platform/architecture/compiler for
a type of atomics 32bit compare and exchange needs to be
implemented. If available and more efficient native support for flags,
32 bit atomic addition, and corresponding 64 bit operations may also
be provided. Additional useful atomic operations are implemented
generically ontop of these.
The implementation for various versions of gcc, msvc and sun studio have
been tested. Additional existing stub implementations for
* Intel icc
* HUPX acc
* IBM xlc
are included but have never been tested. These will likely require
fixes based on buildfarm and user feedback.
As atomic operations also require barriers for some operations the
existing barrier support has been moved into the atomics code.
Author: Andres Freund with contributions from Oskari Saarenmaa
Reviewed-By: Amit Kapila, Robert Haas, Heikki Linnakangas and Álvaro Herrera
Discussion: CA+TgmoYBW+ux5-8Ja=Mcyuy8=VXAnVRHp3Kess6Pn3DMXAPAEA@mail.gmail.com,
20131015123303.GH5300@awork2.anarazel.de,
20131028205522.GI20248@awork2.anarazel.de
Previously, we used an lwlock that was held from the time we began
seeking a candidate buffer until the time when we found and pinned
one, which is disastrous for concurrency. Instead, use a spinlock
which is held just long enough to pop the freelist or advance the
clock sweep hand, and then released. If we need to advance the clock
sweep further, we reacquire the spinlock once per buffer.
This represents a significant increase in atomic operations around
buffer eviction, but it still wins on many workloads. On others, it
may result in no gain, or even cause a regression, unless the number
of buffer mapping locks is also increased. However, that seems like
material for a separate commit. We may also need to consider other
methods of mitigating contention on this spinlock, such as splitting
it into multiple locks or jumping the clock sweep hand more than one
buffer at a time, but those, too, seem like separate improvements.
Patch by me, inspired by a much larger patch from Amit Kapila.
Reviewed by Andres Freund.
x86's memory barrier assembly was marked as clobbering "memory" but
not "cc" even though 'addl' sets various flags. As it turns out gcc on
x86 implicitly assumes "cc" on every inline assembler statement, so
it's not a bug. But as that's poorly documented and might get copied
to architectures or compilers where that's not the case, it seems
better to be precise.
Discussion: 20140919100016.GH4277@alap3.anarazel.de
To keep the code common, backpatch to 9.2 where explicit memory
barriers were introduced.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Previously, they functioned as barriers against CPU reordering but not
compiler reordering, an odd API that required extensive use of volatile
everywhere that spinlocks are used. That's error-prone and has negative
implications for performance, so change it.
In theory, this makes it safe to remove many of the uses of volatile
that we currently have in our code base, but we may find that there are
some bugs in this effort when we do. In the long run, though, this
should make for much more maintainable code.
Patch by me. Review by Andres Freund.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
Per recent analysis by Andres Freund, this implementation is in fact
unsafe, because ARMv5 has weak memory ordering, which means tha the
CPU could move loads or stores across the volatile store performed by
the default S_UNLOCK. We could try to fix this, but have no ARMv5
hardware to test on, so removing support seems better. We can still
support ARMv5 systems on GCC versions new enough to have built-in
atomics support for this platform, and can also re-add support for
the old way if someone has hardware that can be used to test a fix.
However, since the requirement to use a relatively-new GCC hasn't
been an issue for ARMv6 or ARMv7, which lack the swpb instruction
altogether, perhaps it won't be an issue for ARMv5 either.
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
Support for running postgres on Alpha hasn't been tested for a long
while. Due to Alpha's uniquely lax cache coherency model it's a hard
to develop for platform (especially blindly!) and thought to be
unlikely to currently work correctly.
As Alpha is the only supported architecture for Tru64 drop support for
it as well. Tru64's support has ended 2012 and it has been in
maintenance-only mode for much longer.
Also remove stray references to __ksr__ and ultrix defines.
Commit ea9df812d8 failed to include
NUM_BUFFER_PARTITIONS in this offset, resulting in a bad offset.
Ultimately this threw off NUM_FIXED_LWLOCKS which is based on
earlier offsets, leading to memory allocation problems. It seems
likely to have also caused increased LWLOCK contention when
serializable transactions were used, because lightweight locks used
for that overlapped others.
Reported by Amit Kapila with analysis and fix.
Backpatch to 9.4, where the bug was introduced.
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
Instead of storing the ID of the dynamic shared memory control
segment in a file within the data directory, store it in the main
control segment. This avoids a number of nasty corner cases,
most seriously that doing an online backup and then using it on
the same machine (e.g. to fire up a standby) would result in the
standby clobbering all of the master's dynamic shared memory
segments.
Per complaints from Heikki Linnakangas, Fujii Masao, and Tom
Lane.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
Revise the original decision to expose a uint64-based interface and
use Size everywhere possible. Avoid assuming that MAXIMUM_ALIGNOF is
8, or making any assumption about the relationship between that value
and sizeof(Size). If MAXIMUM_ALIGNOF is bigger, we'll now insert
padding after the length word; if it's smaller, we are now prepared
to read and write the length word in chunks.
Per discussion with Tom Lane.
The new function dsm_detach_all() can be used either by postmaster
children that don't wish to take any risk of accidentally corrupting
shared memory; or by forked children of regular backends with
the same need. This patch also updates the postmaster children that
already do PGSharedMemoryDetach() to do dsm_detach_all() as well.
Per discussion with Tom Lane.
Andres Freund
Alvaro Herrera
Bruce Momjian
Heikki Linnakangas
Robert Haas
Kevin Grittner
Tom Lane