Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
This isn't used for anything but a sanity check at the moment, but it could
be highly valuable for debugging purposes. It could also be used to recreate
timeline history by traversing WAL, which seems useful.
pg_ctl promote -m fast will skip the checkpoint at end of recovery so that we
can achieve very fast failover when the apply delay is low. Write new WAL record
XLOG_END_OF_RECOVERY to allow us to switch timeline correctly for downstream log
readers. If we skip synchronous end of recovery checkpoint we request a normal
spread checkpoint so that the window of re-recovery is low.
Simon Riggs and Kyotaro Horiguchi, with input from Fujii Masao.
Review by Heikki Linnakangas
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
This allows recovery to notice certain incorrect recovery scenarios.
If a server has recovered to point X on timeline 5, and you restart
recovery, it better be on timeline 5 when it reaches point X again, not on
some timeline with a higher ID. This can happen e.g if you a standby server
is shut down, a new timeline appears in the WAL archive, and the standby
server is restarted. It will try to follow the new timeline, which is wrong
because some WAL on the old timeline was already replayed before shutdown.
Requires an initdb (or at least pg_resetxlog), because this adds a field to
the control file.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
streamed backup, throw an error and refuse to start up. The restore has not
finished correctly in that case and the data directory is possibly corrupt.
We already errored out in case of archive recovery, but could not during
crash recovery because we couldn't distinguish between the case that
pg_start_backup() was called and the database then crashed (must not error,
data is OK), and the case that we're restoring from a backup and not all
the needed WAL was replayed (data can be corrupt).
To distinguish those cases, add a line to backup_label to indicate
whether the backup was taken with pg_start/stop_backup(), or by streaming
(ie. pg_basebackup).
This requires re-initdb, because of a new field added to the control file.
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
recovery instead of reading the backup history file. This is more robust,
as it stops you from prematurely starting up an inconsisten cluster if the
backup history file is lost for some reason, or if the base backup was
never finished with pg_stop_backup().
This also paves the way for a simpler streaming replication patch, which
doesn't need to care about backup history files anymore.
The backup history file is still created and archived as before, but it's
not used by the system anymore. It's just for informational purposes now.
Bump PG_CONTROL_VERSION as the location of the backup startpoint is now
written to a new field in pg_control, and catversion because initdb is
required
Original patch by Fujii Masao per Simon's idea, with further fixes by me.
contents, and PG_CONTROL_VERSION to reflect the fact that it changed
pg_control contents. (I see we did at least remember to change
XLOG_PAGE_MAGIC for the WAL contents changes.)
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
Add the latter to the values checked in pg_control, since it can't be changed
without invalidating toast table content. This commit in itself shouldn't
change any behavior, but it lays some necessary groundwork for experimentation
with these toast-control numbers.
Note: while TOAST_TUPLE_THRESHOLD can now be changed without initdb, some
thought still needs to be given to needs_toast_table() in toasting.c before
unleashing random changes.
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
was created on a machine with alignment rules and floating-point format
similar to the current machine. Per recent discussion, this seems like
a good idea with the increasing prevalence of 32/64 bit environments.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
Simon Riggs
Heikki Linnakangas
Alvaro Herrera
Bruce Momjian
Magnus Hagander
Robert Haas
Tom Lane
PostgreSQL Daemon
Peter Eisentraut
Thomas G. Lockhart