only stable and not immutable, pred_test_simple_clause has to guard
against making invalid deductions. Add a test for immutability of
the selected test_op.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
in s_lock.c were not updated, and still refers to select. Made my grep
hit the wrong files, so I figured a simple patch was in order.. (other
refs in the same comment block was changed..)
Magnus Hagander
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
of fighting it, avoid hard-wired (and wrong) assumption about max length
of prefix, cause %l to actually work as documented, don't compute data
we may not need.
TID (heap position). This doesn't do anything to the validity of the
finished index, but by pretending to qsort() that there are no really
equal keys in the sort, we can avoid performance problems with qsort
implementations that have trouble with large numbers of equal keys.
Patch from Manfred Koizar.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
directly to the appropriate per-node execution function, using a function
pointer stored by ExecInitExpr. This speeds things up by eliminating one
level of function call. The function-pointer technique also enables further
small improvements such as only making one-time tests once (and then
changing the function pointer). Overall this seems to gain about 10%
on evaluation of simple expressions, which isn't earthshaking but seems
a worthwhile gain for a relatively small hack. Per recent discussion
on pghackers.
that by querying the environment explicitly first for LC_COLLATE and
LC_CTYPE. We have to do this because initdb passes those values in the
environment. If there is nothing there we fall back on the codepage.
Andrew Dunstan
implemented casts to varchar and bpchar using a cast-to-text function.
This is a holdover from before we had pg_cast; it now makes more sense
to just list these casts in pg_cast. While at it, add pg_cast entries
for the other direction (casts from varchar/bpchar) where feasible.
In particular, don't depend on strtod() to accept 'NaN' and 'Infinity'
inputs (while this is required by C99, not all platforms are compliant
with that yet). Also, don't require glibc's behavior from isinf():
it seems that on a lot of platforms isinf() does not itself distinguish
between negative and positive infinity.
message that is reporting a prechecking error in a SQL function.
This is to cue client-side code that the syntax error position,
if any, is with respect to the function body and not the outer command.
incompatible enough to prevent indexscanning the referenced table. Also,
improve the error message that pops out when we can't implement the FK at
all for lack of a usable equality operator. Fabien Coelho, with some review
by Tom Lane.
7.4 rewrite for hashed aggregate support. If the transition data type
is pass-by-reference, the transValue must be pfreed when starting a new
group boundary, else we have a one-value-per-group leakage. Thanks to
Rae Steining for providing a reproducible test case.
types. Update the regression tests and the documentation to reflect
this. Remove the UNSAFE_FLOATS #ifdef.
This is only half the story: we still unconditionally reject
floating point operations that result in +/- infinity. See
recent thread on -hackers for more information.
any amount of leading or trailing whitespace (where "whitespace"
is defined by isspace()). This is for SQL conformance, as well
as consistency with other numeric types (e.g. oid, numeric).
Also refactor pg_atoi() to avoid looking at errno where not
necessary, and add a bunch of regression tests for the input
to these types.
initialization of stats process under EXEC_BACKEND.
[A cleaner, rationalized approach to stat/backend/SSDataBase child
processes under EXEC_BACKEND is on my TODO list. However this patch
takes care of immediate concerns (ie. stats test now passes under
win32)]
Claudio Natoli
bin directories to be packaged under the same root directory (eg. <some
path>/pgsql/bin and <some path>/pgsql/lib) for the win32 port, which
does not appear to be an onerous restriction.
Claudio Natoli
#log_line_prefix = '' # e.g. '<%u%%%d> '
# %u=user name %d=database name
# %r=remote host and port
# %p=PID %t=timestamp %i=command tag
# %c=session id %l=session line number
# %s=session start timestamp
# %x=stop here in non-session processes
# %%='%'
Andrew Dunstan
predicate of the form 'foo IS NOT NULL' is implied by a WHERE clause
that uses 'foo' in any strict operator or function. Per suggestion
and preliminary implementation by John Siracusa; some further hacking
by moi.
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
* Mostly, casting etc to remove compilation warnings in win32 only code.
* main.c: set _IONBF to stdout/stderr under win32 (under win32, _IOLBF
defaults to full buffering)
* pg_resetxlog/Makefile: ensures dirmod.o gets cleaned (got bitten by
this when, after "make clean"ing, switching compilation between Ming +
Cygwin)
Claudio Natoli
+extern Oid SPI_getargtypeid(void *plan, int argIndex);
+extern int SPI_getargcount(void *plan);
+extern bool SPI_is_cursor_plan(void *plan);
Thomas Hallgren
float8 types. This begins the deprecation of this feature: in 7.6,
this input will be rejected.
Also added a new error code for warnings about deprecated features,
and updated the regression tests.
equivalent sort expressions to use was broken: you can't just look
at the relation membership, you have to actually grovel over the
individual Vars in each expression. I think this did work when it
was written, but it was broken by subsequent optimizations that made
join relations not propagate every single input variable upward.
Must find the Var that got propagated, not choose one at random.
Per bug report from Daniel O'Neill.
of which redundant clause to remove, it removes the more expensive one.
In simple scenarios the clauses will be like 'var = var' and there's
no difference, but we are now capable of considering cases where there
are sub-selects in the clauses, and it makes a BIG difference.
comments, make some unrelated improvements to the functions
documentation, and perform some minor consistency cleanup
elsewhere. Original initcap() change from Dennis B., additional
changes by Neil C.
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
exposed thereby. AFAICT these would not lead to any worse problems than
junk emitted on the backend's stdout, but we should have the option to
catch possible worse errors in future.
is still lacking, as is support in plpgsql and other places, but this is
the basic feature. Patch by Andrew Dunstan, some tweaking by Tom Lane.
Also, enable %option nodefault in these two lexers, and patch some gaps
revealed thereby.
and FreeDir routines modeled on the existing AllocateFile/FreeFile.
Like the latter, these routines will avoid failing on EMFILE/ENFILE
conditions whenever possible, and will prevent leakage of directory
descriptors if an elog() occurs while one is open.
Also, reduce PANIC to ERROR in MoveOfflineLogs() --- this is not
critical code and there is no reason to force a DB restart on failure.
All per recent trouble report from Olivier Hubaut.
number of openable files and the number already opened. This eliminates
depending on sysconf(_SC_OPEN_MAX), and allows much saner behavior on
platforms where open-file slots are used up by semaphores.
logically belongs. Arrange to update the _NSGetArgv() copy of the argv
pointer on Darwin. (It seems likely that other NeXT-derived platforms
also have an _NSGetArgv() problem, but until we have some reports I'll
just make this #ifdef __darwin__.)
problem, per previous discussion. Make some additional changes to
centralize the knowledge of just how identifier downcasing is done,
in hopes of simplifying any future tweaking in this area.
applied, deadlock detection and statement_timeout now works.
The file timer.c goes into src/backend/port/win32/.
The patch also removes two lines of "printf debugging" accidentally left
in pqsignal.h, in the console control handler.
Magnus Hagander
1) Now puts in exactly the same change as the current-cvs mingw code
does. (see
http://cvs.sourceforge.net/viewcvs.py/mingw/runtime/mingwex/dirent.c?r1=
1.3&r2=1.4, second part of the patch).
2) Updates both xlog.c and slru.c in backend/access/transam/
3) Also updates pg_resetxlog, which also uses readdir() and checks the
errno value after the loop.
Magnus Hagander
Win2K, and possibly all Win32 variants, it is always 0). This causes a
number of problems in the dfmgr.c logic, which basically all revolve
around the fact that *any* two files will appear to have the same inode.
Claudio Natoli
corner cases that could stand improvement, but it does all the basic
stuff. A byproduct is that the selectivity routines are no longer
constrained to working on simple Vars; we might in future be able to
improve the behavior for subexpressions that don't match indexes.
This commit teaches ANALYZE to store such stats in pg_statistic, but
nothing is done yet about teaching the planner to use 'em.
Also, repair longstanding oversight in separate ANALYZE command: it
updated the pg_class.relpages and reltuples counts for the table proper,
but not for indexes.
vs. timestamptz. This allows use of indexes for expressions like
datecol >= date 'today' - interval '1 month'
which were formerly not indexable without casting the righthand side
down from timestamp to date.
Nov 2002: when constant-expression simplification removes all the
aggregate function calls from a query, that doesn't mean we can act as
though there never were any aggregates. Per bug report from Gabor Szucs.
indexes, it seems like we ought to put another layer of indirection
between the compute_stats functions and the actual data storage. This
would allow us to compute the values on-the-fly, for example.
for already empty buffers because their buffer tag was not cleard out
when the buffers have been invalidated before.
Also removed the misnamed BM_FREE bufhdr flag and replaced the checks,
which effectively ask if the buffer is unpinned, with checks against the
refcount field.
Jan
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
allow the bgwriter to start before the startup subprocess has finished
... it tends to crash otherwise. (The same problem may have existed for
the checkpointer, I'm not entirely sure.) Remove some code that was
redundant because the bgwriter is handled as a member of the backend list.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
is asked to assign a variable to itself, it will result in doing a
memcpy() on an entirely-overlapping memory range, which results in
undefined behavior according to ANSI C. That said, it is unlikely to
actually do anything bad on any sane libc, but this keeps valgrind quiet.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
a series of numbers, optionally using an explicit step size other
than the default value (one). Use function in the information_schema
to replace hard-wired knowledge of INDEX_MAX_KEYS. initdb forced due
to pg_proc change. Documentation update still needed -- will be
committed separately.
palloc()$
Fixed. Thanks.
> src/backend/postmaster/pgstat.c miss
> #include "tcop/tcopprot.h" line.
Fixed.
> src/utils/dllinit.c wrong include header line at MinGW.
> #include <cygwin/version.h> must be not included
Fixed.
> by the way,
> I can't compile eccp because I used lower version bison.
> and bin/pg_resetxlog too. in this case I can't find what's wrong.
Fixed.
valgrind: a buffer passed to strncmp() had to be NUL-terminated. Original
report and patch from Dennis Bjorkland, some cleanup by Andrew Dunstan,
and finally some editorializing from Neil Conway.
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
whereToSendOutput instead because they are really inquiring about
the correct client communication protocol. Update some comments.
This is pointing towards supporting regular FE/BE client protocol
in a standalone backend, per discussion a month or so back.
unnecessary checks for complex grouping expressions: we cannot check
whether the expressions are simple Vars until after we apply
flatten_join_alias_vars, because in the case of FULL JOIN that routine
can introduce non-Var expressions. Per example from Joel Knight.
composite types, because TupleTableSlots aren't Datums and can't be
stored in Const nodes. We can remove this restriction if we ever
adopt a cleaner runtime representation for whole-tuple results, but
at the moment it's broken. Per example from Thomas Hallgren.
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
complete ExtendCLOG() before advancing nextXid, so that if that routine
fails, the next incoming transaction will try it again. Per trouble
report from Christopher Kings-Lynne.
done by the background writer between writing dirty blocks and
napping.
none (default) no action
sync bgwriter calls smgrsync() causing a sync(2)
A global sync() is only good on dedicated database servers, so
more flush methods should be added in the future.
Jan
IN (sub-SELECT) constructs. We must force a clauseless join of the
sub-select member relations, but it wasn't happening because the code
thought it would be able to use the join clause arising from the IN.
that it's good to join where there are join clauses rather than where there
are not. Also enable it to generate bushy plans at need, so that it doesn't
fail in the presence of multiple IN clauses containing sub-joins. These
changes appear to improve the behavior enough that we can substantially reduce
the default pool size and generations count, thereby decreasing the runtime,
and yet get as good or better plans as we were getting in 7.4. Consequently,
adjust the default GEQO parameters. I also modified the way geqo_effort is
used so that it affects both population size and number of generations;
it's now useful as a single control to adjust the GEQO runtime-vs-plan-quality
tradeoff. Bump geqo_threshold to 12, since even with these changes GEQO
seems to be slower than the regular planner at 11 relations.
patch: a 3-value enum was mistakenly assigned directly to a 'bool'
in transformCreateStmt(). Along the way, change makeObjectName()
to be static, as it isn't used outside analyze.c
when scanning a table that we need all the columns from. In case of
SELECT INTO, we have to check that the hasoids flag matches the desired
output type, too. Per report from Mike Mascari.
default value for geqo_effort is supposed to be 40, not 1. The actual
'genetic' component of the GEQO algorithm has been practically disabled
since 7.1 because of this mistake. Improve documentation while at it.
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
dynamically loaded C functions). Some limited testing suggests that
this puts the lookup speed for external functions just about on par
with built-in functions. Per discussion with Eric Ridge.
in a COPY error message. It seems that glibc gets indigestion if it is
asked to truncate strings that contain invalid UTF-8 encoding sequences.
vsnprintf will return -1 in such cases, leading to looping and eventual
memory overflow in elog.c. Instead use our own, more robust pg_mbcliplen
routine. I believe this problem accounts for several recent reports of
unexpected 'out of memory' errors during COPY IN.
check instead of hardwiring assumptions that only certain plan node types
can appear at the places where we are testing. This was always a pretty
fragile assumption, and it turns out to be broken in 7.4 for certain cases
involving IN-subselect tests that need type coercion.
Also, modify code that builds finished Plan tree so that node types that
don't do projection always copy their input node's targetlist, rather than
having the tlist passed in from the caller. The old method makes it too
easy to write broken code that thinks it can modify the tlist when it
cannot.
a run-time key (that is, a nonconstant expression compared to the index
variable), the key is evaluated just once per scan, but we were charging
costs as though it were evaluated once per visited index entry.
tuptoaster.c --- fields that are compressed in-line are not a reason
to invoke the toaster. Along the way, add a couple more htup.h macros
to eliminate confusing negated tests, and get rid of the already
vestigial TUPLE_TOASTER_ACTIVE symbol.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
incorrect permissions checking, but in fact disabled most all permissions
checks for view updates. This corrects problems reported by Sergey
Yatskevich among others, at the cost of re-introducing the problem
previously reported by Tim Burgess. However, since we'd lived with that
problem for quite awhile without knowing it, we can live with it awhile
longer until a proper fix can be made in 7.5.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
variables, not just simple variables. This was foreseen in the original
coding of this routine, but not implemented until now. Responds to
performance gripe from Laurent Perez.
'simple' references another view that is not simple. Must recheck
conditions after performing recursive pullup. Per example from
Laurent Perez, 9-Jan-04.
ignore SIGPIPE from send() in libpq, but terminate on any other SIGPIPE,
unless the user installs their own signal handler.
This is a minor fix because the only time you get SIGPIPE from libpq's
send() is when the backend dies.
predicate tester. It can now deal with commuted clauses (for
instance, 4 < x implies x > 3), subclauses more complicated than
a simple Var (for example, upper(x) = 't' implies upper(x) > 'a'),
and <> operators (for example, x < 3 implies x <> 4). Still
only understands operators associated with btree opclasses, though.
Inspired by example from Martin Hampl.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
BackendFork/SSDataBase/pgstat) startup, to allow fork/exec calls to
closely mimic (the soon to be provided) Win32 CreateProcess equivalent
calls.
Claudio Natoli
- Update comment in IsReservedName() to the present day
- Improve some variable & function names in commands/vacuum.c. I
was planning to rewrite this to avoid lappend(), but since I
still intend to do the list rewrite, there's no need for that.
- Update some smgr comments which seemed to imply that we still
forced all dirty pages to disk at commit-time.
- Replace some #ifdef DIAGNOSTIC code with assertions.
- Make the distinction between OS-level file descriptors and
virtual file descriptors a little clearer in a few comments
- Other minor comment improvements in the smgr code
regular qpqual ('filter condition'), add special-purpose code to
nodeIndexscan.c to recheck them. This ends being almost no net addition
of code, because the removal of planner code balances out the extra
executor code, but it is significantly more efficient when a lossy
operator is involved in an OR indexscan. The old implementation had
to recheck the entire indexqual in such cases.
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
run the data through cpp, and we know of at least one platform where
unusual cpp behavior breaks the process. So remove the cpp step,
and make consequent simplifications.
teaching the latter to accept either RestrictInfo nodes or bare
clause expressions; and cache the selectivity result in the RestrictInfo
node when possible. This extends the caching behavior of approx_selectivity
to many more contexts, and should reduce duplicate selectivity
calculations.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
just look for common clauses that can be pulled out of ORs. Per recent
discussion, extracting common clauses seems to be the only really useful
effect of normalization, and if we do it explicitly then we can avoid
cluttering the qual with partially-redundant duplicated expressions, which
was an unpleasant side-effect of the old approach.
call. You'd think this would cause some problems, but because of the
way hash_create is coded, the only side-effect was creation of a useless
memory context for the hashtable.
conditions is overkill; set_union() does the job about as well, and
much more efficiently. Furthermore this avoids assuming that
canonicalize_qual() will check for duplicate clauses at all, which
it may not always do.
showed that for common operator names such as '=', the pallocs done by
this routine occupied a surprisingly large fraction of the total time
for the parser to process an operator.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
instruction in the s_lock() wait loop, and use test before test-and-set
in TAS() macro to avoid unnecessary bus traffic. Patch from Manfred
Spraul, reworked a bit by Tom.
special meaning of these terms in pg_hba.conf.
Also changes ugly pg_hba.conf IPv6 netmask of
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff to ::1/128.
Andrew Dunstan
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
that were broken, try to make layout of s_lock.h entries consistent,
use HAVE_SPINLOCKS in preference to HAS_TEST_AND_SET everywhere outside
s_lock.h itself.
> Attached is a patch that addressed all the discussed issues
> that did not break backward compatability, including the
> ability to output ISO-8601 compliant intervals by setting
> datestyle to iso8601basic.
commit, but I am adding it now so it is in CVS.]
The patch basically is a slight rearrangement of the code to allow
fork/exec on Unix, with the ultimate goal of doing CreateProcess on
Win32. The changes are:
o Write out postmaster global variables and per-backend
variables to be read by the exec'ed backend
o Mark some static variables as global when exec is used so
then can be dumped from postmaster.c, marked NON_EXEC_STATIC
o Remove value passing with -p now that we have per-backend
file
o Move some pointer storage out of shared memory for easier
dumping.
o Modified pgsql_temp directory cleanup to handle per-database
directories and the backend exec directory under datadir.
Claudio Natoli
to step more than one entry after descending the search tree to arrive at
the correct place to start the scan. This can improve the behavior
substantially when there are many entries equal to the chosen boundary
value. Per suggestion from Dmitry Tkach, 14-Jul-03.
a) ones that are 100% backward (such as the comment about
outputting this format)
and
b) ones that aren't (such as deprecating the current
postgresql shorthand of
'1Y1M'::interval = 1 year 1 minute
in favor of the ISO-8601
'P1Y1M'::interval = 1 year 1 month.
Attached is a patch that addressed all the discussed issues that
did not break backward compatability, including the ability to
output ISO-8601 compliant intervals by setting datestyle to
iso8601basic.
Interval values can now be written as ISO 8601 time intervals, using
the "Format with time-unit designators". This format always starts with
the character 'P', followed by a string of values followed
by single character time-unit designators. A 'T' separates the date and
time parts of the interval.
Ron Mayer
shut down cleanly if the plan node is ReScanned before the SRFs are run
to completion. This fixes the problem for SQL-language functions, but
still need work on functions using the SRF_XXX() macros.
----------------------------------------------------------------------
/*
* relation_byte_size
* Estimate the storage space in bytes for a given number of tuples
* of a given width (size in bytes).
*/
static double
relation_byte_size(double tuples, int width)
{
return tuples * (MAXALIGN(width) + MAXALIGN(sizeof(HeapTupleData)));
}
----------------------------------------------------------------------
Shouldn't this be HeapTupleHeaderData and not HeapTupleData ?
(Of course, from a costing perspective these shouldn't be very different but ...)
Sailesh Krishnamurthy
where a joinclause is redundant with a restriction clause. Original coding
believed this was impossible and didn't need to be checked for, but that
was a thinko ...
does not affect UNKNOWN-type literals or Params. This fixes the recent
complaint about count('x') being broken, and improves consistency in
a few other respects too.
a join in its subselect. In this situation we *must* build a bushy
plan because there are no valid left-sided or right-sided join trees.
Accordingly, hoary sanity check needs an update. Per report from
Alessandro Depase.
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
planning to modify them itself. Otherwise we end up with shared RTE
substructure, which breaks inheritance_planner because the rte->inh
flag needs to be independent in each copied subquery. Per bug report
from Chris Piker.
to certain compile-time options (FUNC_MAX_ARGS, INDEX_MAX_KEYS,
NAMEDATALEN, BLCKSZ, HAVE_INT64_TIMESTAMP). Also added "category",
"short_desc", and "extra_desc" to the pg_settings view. Per recent
discussion here:
http://archives.postgresql.org/pgsql-patches/2003-11/msg00363.php
and hash bucket-size estimation. Issue has been there awhile but is more
critical in 7.4 because it affects varchar columns. Per report from
Greg Stark.
on 64-bit Solaris. Use a non-system-dependent datatype for UsedShmemSegID,
namely unsigned long (which we were already assuming could hold a shmem
key anyway, cf RecordSharedMemoryInLockFile).
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
method control structure, or a table of control structures.
. Use type LOCKMASK where an int is not a counter.
. Get rid of INVALID_TABLEID, use INVALID_LOCKMETHOD instead.
. Use INVALID_LOCKMETHOD instead of (LOCKMETHOD) NULL, because
LOCKMETHOD is not a pointer.
. Define and use macro LockMethodIsValid.
. Rename LOCKMETHOD to LOCKMETHODID.
. Remove global variable LongTermTableId in lmgr.c, because it is
never used.
. Make LockTableId static in lmgr.c, because it is used nowhere else.
Why not remove it and use DEFAULT_LOCKMETHOD?
. Rename the lock method control structure from LOCKMETHODTABLE to
LockMethodData. Introduce a pointer type named LockMethod.
. Remove elog(FATAL) after InitLockTable() call in
CreateSharedMemoryAndSemaphores(), because if something goes wrong,
there is elog(FATAL) in LockMethodTableInit(), and if this doesn't
help, an elog(ERROR) in InitLockTable() is promoted to FATAL.
. Make InitLockTable() void, because its only caller does not use its
return value any more.
. Rename variables in lock.c to avoid statements like
LockMethodTable[NumLockMethods] = lockMethodTable;
lockMethodTable = LockMethodTable[lockmethod];
. Change LOCKMETHODID type to uint16 to fit into struct LOCKTAG.
. Remove static variables BITS_OFF and BITS_ON from lock.c, because
I agree to this doubt:
* XXX is a fetch from a static array really faster than a shift?
. Define and use macros LOCKBIT_ON/OFF.
Manfred Koizar
to note:
1) arttype is numeric. I thought this was the best way of allowing
arbitarily large factorials, even though factorial(2^63) is a large
number. Happy to change to integers if this is overkill.
2) since we're accepting numeric arguments, the patch tests for floats.
If a numeric is passed with non-zero decimal portion, an error is raised
since (from memory) they are undefined.
Gavin Sherry
Ward's report that it can still happen in RC2 forces me to realize that
this is not a can't-happen condition after all, and that the compaction
code had better cope rather than panicking.
Vars created to fill subplan args lists. This is an ancient error, going
back at least to 7.0, but is more easily triggered in 7.4 than before
because we no longer compare varlevelsup when deciding whether a Param
slot can be re-used. Fixes bug reported by Klint Gore.
the hashclauses field of the parent HashJoin. This avoids problems with
duplicated links to SubPlans in hash clauses, as per report from
Andrew Holm-Hansen.
tree for CYCLE option; don't assume zeros are invalid values for sequence
fields other than increment_by; don't reset cache_value when not told to;
simplify code for testing whether to apply defaults.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
This first part of the background writer does no syncing at all.
It's only purpose is to keep the LRU heads clean so that regular
backends seldom to never have to call write().
Jan
which had been unintentionally broken by recent changes to tighten up the
DateStyle rules for all-numeric date input. Add documentation and
regression tests for this, too.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
regression=# select 1 from tenk1 ta cross join tenk1 tb for update;
ERROR: no relation entry for relid 3
7.3 said "SELECT FOR UPDATE cannot be applied to a join", which was better
but still wrong, considering that 7.2 took the query just fine. Fix by
making transformForUpdate() ignore JOIN and other special RTE types,
rather than trying to mark them FOR UPDATE. The actual error message now
only appears if you explicitly name the join in FOR UPDATE.
process the command as though it were issued by the object owner.
This prevents creating weird scenarios in which the same privileges
may appear to flow from different sources, and ensures that a superuser
can in fact revoke all privileges if he wants to. In particular this
means that the regression tests work when run by a superuser other than
the original bootstrap userid. Per report from Larry Rosenman.
rule split the query into one INSERT and one UPDATE where the UPDATE
then hit's the just created row without modifying the key fields again.
In this special case, the new key slipped in totally unchecked.
Jan
ACL array, and force languages to be treated as owned by the bootstrap
user ID. (pg_language should have a lanowner column, but until it does
this will have to do as a workaround.)
subquery that didn't previously have one. We have traditionally made
the caller of ResolveNew responsible for updating the hasSubLinks flag
of the outermost query, but this fails to account for hasSubLinks in
subqueries. Fix ResolveNew to handle this. We might later want to
change the calling convention of ResolveNew so that it can fix the
outer query too, simplifying callers. But I went with the localized
fix for now. Per bug report from J Smith, 20-Oct-03.
fully search-path-proof yet; also, element_types view did not work for
parameters and result types of functions, because it didn't generate
the object_name for the function the same way the data_type_privileges
view does. While at it, centralize dependencies on INDEX_MAX_KEYS/
FUNC_MAX_ARGS into a function returning setof int, so that it will be
easier to fix information_schema for nonstandard values of these
parameters.
Use pg_get_constraintdef instead of pg_constraint.consrc
Use UNION ALL instread of UNION
Make use of regclass type for getting OID of system catalogs
Add schema qualifications where necessary
Fix typos
memory say 'out of shared memory'; some were doing that and some just
said 'out of memory'. Also add a HINT about increasing max_locks_per_transaction
where relevant, per suggestion from Sean Chittenden. (The former change
does not break the strings freeze; the latter does, but I think it's
worth doing anyway.)
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
when the pg_class.relhassubclass value is already correct. This should
avoid most cases of the 'tuple concurrently updated' problem that
Robert Creager recently complained about. Also remove a bunch of dead
code in StoreCatalogInheritance() --- it was still computing the complete
list of direct and indirect inheritance ancestors, though that list has
not been needed since we got rid of the pg_ipl catalog.
one side of a binary operator is probably supposed to be the same type
as the other operand' will be applied for domain types. This worked
in 7.3 but was broken in 7.4 due to code rearrangements. Mea culpa.
a single LEFT JOIN query instead of firing the check trigger for each
row individually. Stephan Szabo, with some kibitzing from Tom Lane and
Jan Wieck.
before it is de-backslashed, not after. This allows the null string \N
to be reliably distinguished from the data value \N (which must be
represented as \\N). Per bug report from Manfred Koizar ... but it's
amazing this hasn't been reported before ...
Also, be consistent about encoding conversion for null string: the form
specified in the command is in the server encoding, but what is sent
to/from client must be in client encoding. This never worked quite
right before either.
with required outer parentheses. Breakage seems to be leftover from
domain-constraint patches. This could be smarter about suppressing
extra parens, but at this stage of the release cycle I want certainty
not cuteness.
of function bodies is done at CREATE FUNCTION time. This is normally
true but can be set false to avoid problems with forward references,
wrong schema search path, etc. This is just the backend patch, still
need to adjust pg_dump to make use of it.
to make them comparable to what UpdateStats does in the same situation.
I'm not certain two instances of vac_update_relstats could run in
parallel for the same relation, but parallel invocations of vac_update_dbstats
do seem possible.
in the schema search path. Otherwise pg_dump doesn't correctly dump
scenarios where a custom opclass is created in 'public' and then used
by indexes in other schemas.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
Before patch:
test=# select pg_get_constraintdef(oid) from pg_constraint;
pg_get_constraintdef
-------------------------------------------------------------------------------------------------
CHECK (VALUE >= 0)
CHECK ((((a)::text = 'asdf'::text) OR ((a)::text = 'fdsa'::text)) OR
((a)::text = 'dfd'::text))
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
test=# select pg_get_constraintdef(oid, true) from pg_constraint;
pg_get_constraintdef
-----------------------------------------------------------------------------------
CHECK VALUE >= 0
CHECK a::text = 'asdf'::text OR a::text = 'fdsa'::text OR a::text =
'dfd'::text
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
After patch:
test=# select pg_get_constraintdef(oid) from pg_constraint;
pg_get_constraintdef
-------------------------------------------------------------------------------------------------
CHECK (VALUE >= 0)
CHECK ((((a)::text = 'asdf'::text) OR ((a)::text = 'fdsa'::text)) OR
((a)::text = 'dfd'::text))
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
test=# select pg_get_constraintdef(oid, true) from pg_constraint;
pg_get_constraintdef
-----------------------------------------------------------------------------------
CHECK (VALUE >= 0)
` CHECK (a::text = 'asdf'::text OR a::text = 'fdsa'::text OR a::text =
'dfd'::text)
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
It's important that those brackets are there to (a) match all other
constraints and (b) so that people can just copy and paste them and it
will work as SQL.
Christopher Kings-Lynne
post-abort cleanup hooks. I'm surprised that we have not needed this
already, but I need it now to fix a plpgsql problem, and the usefulness
for other dynamically loaded modules seems obvious.
in the RI triggers for ON DELETE/UPDATE SET DEFAULT. The code depended
way too much on knowledge of plan structure, and yet still would fail
if the generated query got rewritten by rules.
every string, especially if some of the output should be fixed-format
machine-readable. This needs to be more carefully sorted out. Also, make
the help message generated by --help-config -h be more similar in style to
the others.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
since 7.3: 'select array_dims(histogram_bounds) from pg_stats' used to
work and still should. Problem was that code wouldn't take input of
declared type anyarray as matching an anyarray argument. Allow this
case as long as we don't need to determine an element type (which in
practice means as long as anyelement isn't used in the function signature).
difference between INSERT_IN_PROGRESS and DELETE_IN_PROGRESS for
tuples inserted and then deleted by a concurrent transaction.
Example of bug:
regression=# create table foo (f1 int);
CREATE TABLE
regression=# begin;
BEGIN
regression=# insert into foo values(1);
INSERT 195531 1
regression=# delete from foo;
DELETE 1
regression=# insert into foo values(1);
INSERT 195532 1
regression=# create unique index fooi on foo(f1);
ERROR: could not create unique index
DETAIL: Table contains duplicated values.
not just MAXALIGN boundaries. This makes a noticeable difference in
the speed of transfers to and from kernel space, at least on recent
Pentiums, and might help other CPUs too. We should look at making
this happen for local buffers and buffile.c too. Patch from Manfred Spraul.
Per recent discussion, this does not work because other backends can't
reliably see tuples in a temp table and so cannot run the RI checks
correctly. Seems better to disallow this case than go back to accessing
temp tables through shared buffers. Also, disallow FK references to
ON COMMIT DELETE ROWS tables. We already caught this problem for normal
TRUNCATE, but the path used by ON COMMIT didn't check.
reindexing system tables without ignoring system indexes, when the
other two varieties of REINDEX disallow it. Make all three act the same,
and simplify downstream code accordingly.
child tables --- all cases that will trip various sanity checks elsewhere
in the system, as well as cases that should not occur in the only intended
use of this feature, namely coping with ancient pg_dump representation
of views. Per bug report from Chris Pizzi.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
recent gripe, I discovered not one but two undocumented, undesirable
behaviors of glibc's mktime. So, stop using it entirely, and always
rely on inversion of localtime() to determine the local time zone.
It's not even very much slower, as it turns out that mktime (at least
in the glibc implementation) also does repeated reverse-conversions.
comments/examples in pg_hba.conf. This patch remedies that, adds a brief
explanation of the connection types, and adds a missing period in the
docs.
Jon Jensen
ps status as '[local]', not as 'localhost' as the code has been doing
recently. That's too easily confused with TCP loopback connections,
and there is no good reason to change the behavior anyway.
to create a TCP/IP socket from FATAL to LOG. This was unwise;
historically we have expected socket conflicts to abort postmaster
startup. Conflicts on port numbers with another postmaster can only
be detected reliably at the TCP socket level.
sequence every time it's called is bogus --- it interferes with user
control over the seed, and actually decreases randomness overall
(because a seed based on time(NULL) is pretty predictable). If you really
want a reproducible result from geqo, do 'set seed = 0' before planning
a query.
on either name or inode; otherwise load_external_function() won't do
anything. At least on Linux, it appears that recompiling a shlib leads
to a new file with a different inode, so the old code failed to detect
a match.
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
killed items; just skip to the next item immediately. Only check for
key equality when we reach a non-killed item or the end of the index
page. This saves key comparisons when there are lots of killed items,
as for example in a heavily-updated table that's not been vacuumed lately.
Seems to be a win for pgbench anyway.
config file if it exists. This was already discussed as being a good
idea, and now seems the cleanest way to deal with initdb-time failures
on machines with small SHMMAX. (The submitted patches instead modified
initdb.sh to pass the correct sizing parameters, but that would still
leave standalone backends prone to failure later. An admin who needs
to use a standalone backend has enough trouble already, he shouldn't
have to manually configure its shmem settings...)
layout; therefore, this change forces REINDEX of hash indexes (though
not a full initdb). Widen hashm_ntuples to double so that hash space
management doesn't get confused by more than 4G entries; enlarge the
allowed number of free-space-bitmap pages; replace the useless bshift
field with a useful bmshift field; eliminate 4 bytes of wasted space
in the per-page special area.
scheme. A pleasant side effect is that it is *much* faster when deleting
a large fraction of the indexed tuples, because of elimination of
redundant hash_step activity induced by hash_adjscans. Various other
continuing code cleanup.
libpq, talking to an old server, should assume SQL_ASCII as the default
client encoding, because that is what the server will actually use (not
the server encoding).
yet). Fix a couple of bugs that would only appear if multiple bitmap pages
are used, including a buffer reference leak and incorrect computation of bit
indexes. Get rid of 'overflow address' concept, which accomplished nothing
except obfuscating the code and creating a risk of failure due to limited
range of offset field. Rename some misleadingly-named fields and routines,
and improve documentation.
explanation of the remarkably confusing page addressing scheme.
The file also includes my planned-but-not-yet-implemented revision
of the hash index locking scheme.
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
lumping them into ERRCODE_UNDEFINED_OBJECT/ERRCODE_DUPLICATE_OBJECT.
This seems reasonable since 'object' was meant to refer to 'object in the
database' and a file is outside the database. Per request from Dave
Cramer.
max_connections at initdb time. Get rid of DEF_NBUFFERS and DEF_MAXBACKENDS
macros, which aren't doing anything useful anymore, and put more likely
defaults into postgresql.conf.sample.
perform a timestamp-to-date coercion. Instead both routines share a
subroutine that delivers the parsing result as a struct tm. This avoids
problems with timezone dependency of to_date's result, and should be
at least marginally faster too.
