Debian unstable is shipping a broken version of libedit: it de-escapes
words before passing them to the application's tab completion function,
preventing us from recognizing backslash commands. Fortunately,
we have enough information available to dig the original text out of
rl_line_buffer, so ignore the string argument and do that.
I view this as a temporary workaround to get the affected buildfarm
members back to green in the wake of 7c015045b. I hope we can get
rid of it once somebody fixes Debian's libedit; hence, no back-patch,
at least for now.
Discussion: https://postgr.es/m/20200103110128.GA28967@msg.df7cb.de
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
The refactoring done in a4fd3aa for query cancellation has messed up
with the logic in psql by mixing CancelRequested and cancel_pressed,
breaking for example \watch. The former would be switched to true if a
cancellation request has been attempted and that it actually succeeded,
and the latter tracks if a cancellation attempt has been done.
This commit brings back the code of psql to a state consistent to what
it was before a4fd3aa, without giving up on the refactoring pieces
introduced. It should be actually possible to merge more both flags as
their concepts are close enough, however note that psql's --single-step
mode relies on cancel_pressed to be always set, so this requires more
careful analysis left for later.
While on it, fix the declarations of CancelRequested (in cancel.c) and
cancel_pressed (in psql) to be volatile sig_atomic_t. Previously,
both were declared as booleans, which should be fine on modern
platforms, but the C standard recommends the use of sig_atomic_t for
variables used in signal handlers. Note that since its introduction in
a1792320, CancelRequested declaration was not volatile.
Reported-by: Jeff Janes
Author: Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1zpoUDGKqWKuMWkj7t-bOCaJDx0r=5te_-d0B2HVLABXg@mail.gmail.com
Prefer to call "rl_filename_completion_function" and
"rl_completion_matches", rather than using the names without the rl_
prefix. This matches Readline's documentation, and makes our code
a little clearer about which names are external. On platforms that
only have the un-prefixed names (just some very ancient versions of
libedit, AFAICT), reverse the direction of the compatibility macro
definitions to match.
Also, remove our extern declaration of "filename_completion_function";
whatever libedit versions may have failed to declare that are surely
dead and buried.
Discussion: https://postgr.es/m/23608.1576248145@sss.pgh.pa.us
Originally, this code was duplicated in src/bin/psql/ and
src/bin/scripts/, but it can be useful for other frontend applications,
like pgbench. This refactoring offers the possibility to setup a custom
callback which would get called in the signal handler for SIGINT or when
the interruption console events happen on Windows.
Author: Fabien Coelho, with contributions from Michael Paquier
Reviewed-by: Álvaro Herrera, Ibrar Ahmed
Discussion: https://postgr.es/m/alpine.DEB.2.21.1910311939430.27369@lancre
Up to now, whatever you'd edited was put back into the query buffer
but not redisplayed, which is less than user-friendly. But we can
improve that just by printing the text along with a prompt, if we
enforce that the editing result ends with a newline (which it
typically would anyway). You then continue typing more lines if
you want, or you can type ";" or do \g or \r or another \e.
This is intentionally divorced from readline's processing,
for simplicity and so that it works the same with or without
readline enabled. We discussed possibly integrating things
more closely with readline; but that seems difficult, uncertainly
portable across different readline and libedit versions, and
of limited real benefit anyway. Let's try the simple way and
see if it's good enough.
Patch by me, thanks to Fabien Coelho and Laurenz Albe for review
Discussion: https://postgr.es/m/13192.1572318028@sss.pgh.pa.us
This new option terminates the other sessions connected to the target
database and then drop it. To terminate other sessions, the current user
must have desired permissions (same as pg_terminate_backend()). We don't
allow to terminate the sessions if prepared transactions, active logical
replication slots or subscriptions are present in the target database.
Author: Pavel Stehule with changes by me
Reviewed-by: Dilip Kumar, Vignesh C, Ibrar Ahmed, Anthony Nowocien,
Ryan Lambert and Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Procedures are supported since v11 and \dfp can be used since this
version, but it was not mentioned as a supported option in the
description of describeFunctions() which handles \df in psql.
Extracted from a larger patch.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1908281618520.28828@lancre
When building statistics, we need to decide how many rows to sample and
how accurate the resulting statistics should be. Until now, it was not
possible to explicitly define statistics target for extended statistics
objects, the value was always computed from the per-attribute targets
with a fallback to the system-wide default statistics target.
That's a bit inconvenient, as it ties together the statistics target set
for per-column and extended statistics. In some cases it may be useful
to require larger sample / higher accuracy for extended statics (or the
other way around), but with this approach that's not possible.
So this commit introduces a new command, allowing to specify statistics
target for individual extended statistics objects, overriding the value
derived from per-attribute targets (and the system default).
ALTER STATISTICS stat_name SET STATISTICS target_value;
When determining statistics target for an extended statistics object we
first look at this explicitly set value. When this value is -1, we fall
back to the old formula, looking at the per-attribute targets first and
then the system default. This means the behavior is backwards compatible
with older PostgreSQL releases.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20190618213357.vli3i23vpkset2xd@development
Reviewed-by: Kirk Jamison, Dean Rasheed
After an unexpected connection loss and successful reconnection,
psql neglected to resynchronize its internal state about the server,
such as server version. Ordinarily we'd be reconnecting to the same
server and so this isn't really necessary, but there are scenarios
where we do need to update --- one example is where we have a list
of possible connection targets and they're not all alike.
Define "resynchronize" as including connection_warnings(), so that
this case acts the same as \connect. This seems useful; for example,
if the server version did change, the user might wish to know that.
An attuned user might also notice that the new connection isn't
SSL-encrypted, for example, though this approach isn't especially
in-your-face about such changes. Although this part is a behavioral
change, it only affects interactive sessions, so it should not break
any applications.
Also, in do_connect, make sure that we desynchronize correctly when
abandoning an old connection in non-interactive mode.
These problems evidently are the result of people patching only one
of the two places where psql deals with connection changes, so insert
some cross-referencing comments in hopes of forestalling future bugs
of the same ilk.
Lastly, in Windows builds, issue codepage mismatch warnings only at
startup, not during reconnections. psql's codepage can't change
during a reconnect, so complaining about it again seems like useless
noise.
Peter Billen and Tom Lane. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMTXbE8e6U=EBQfNSe01Ej17CBStGiudMAGSOPaw-ALxM-5jXg@mail.gmail.com
POSIX permits getopt() to advance optind beyond argc when the last
argv entry is an option that requires an argument and hasn't got one.
It seems that no major platforms actually do that, but musl does,
so that something like "psql -f" would crash with that libc.
Add a check that optind is in range before trying to look at the
possibly-bogus option.
Report and fix by Quentin Rameau. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/20190825100617.GA6087@fifth.space
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
describeOneTableDetails issued a partition-constraint-fetching query
for every table, even ones it knows perfectly well are not partitions.
To add insult to injury, it then proceeded to leak the empty PGresult
if the table wasn't a partition. Doing that a lot of times might
amount to a meaningful leak, so this seems like a back-patchable bug.
Fix that, and also fix a related PGresult leak in the partition-parent
case (though that leak would occur only if we got no row, which is
unexpected).
Minor code beautification too, to make this code look more like the
pre-existing code around it.
Back-patch the whole change into v12. However, the fact that we already
know whether the table is a partition dates only to commit 1af25ca0c;
back-patching the relevant changes from that is probably more churn
than is justified in released branches. Hence, in v11 and v10, just
do the minimum to fix the PGresult leaks.
Noted while messing around with adjacent code for yesterday's \d
improvements.
Include partitioning information much as we do for partitioned tables.
(However, \d+ doesn't show the partition bounds, because those are
not stored for indexes.)
In passing, fix a couple of queries to look less messy in -E output.
Also, add some tests for \d on tables with nondefault tablespaces.
(Somebody previously added a rather silly number of tests for \d
on partitioned indexes, yet completely neglected other cases.)
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
Add the name of the owning table to the footers for a TOAST table.
Also, show all the same footers as for a regular table (in practice,
this adds the index and perhaps the tablespace and access method).
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
In normal interactive mode, psql's log messages accidentally got a
"psql:" prefix that was not supposed to be there. This only happened
if there was no .psqlrc file being read, so it wasn't discovered for a
while. Fix this by adding the appropriate logging format
configuration call in the right code path.
Discussion: https://www.postgresql.org/message-id/7586.1560540361@sss.pgh.pa.us
This is like \echo except that the text is sent to stderr not stdout.
In passing, fix a pre-existing bug in \echo and \qecho: per documentation
the -n switch should only be recognized when it is the first argument,
but actually any argument matching "-n" was treated as a switch.
(Should we back-patch that?)
David Fetter (bug fix by me), reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190421183115.GA4311@fetter.org
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
In verbose mode, listTables() now emits a "Persistence" column
showing whether the table/index/view/etc is permanent, temporary,
or unlogged.
David Fetter, reviewed by Fabien Coelho and Rafia Sabih
Discussion: https://postgr.es/m/20190423005642.GZ28936@fetter.org
Commit 4f3b38fe2 supposed that complete_from_const() is equivalent to
the one-element-list case of complete_from_list(), but that's not
really true at all. complete_from_const() supposes that the completion
is certain enough to justify wiping out whatever the user typed, while
complete_from_list() will only provide completions that match the
word-so-far.
In practice, given the lame parsing technology used by tab-complete.c,
it's fairly hard to believe that we're *ever* certain enough about
a completion to justify auto-correcting user input that doesn't match.
Hence, remove the inappropriate unification of the two cases.
As things now stand, complete_from_const() is used only for the
situation where we have no matches and we need to keep readline
from applying its default complete-with-file-names behavior.
This (mis?) behavior actually exists much further back, but
I'm hesitant to change it in released branches. It's not too
late for v12, though, especially seeing that the aforesaid
commit is new in v12.
Per gripe from Ken Tanzer.
Discussion: https://postgr.es/m/CAD3a31XpXzrZA9TT3BqLSHghdTK+=cXjNCE+oL2Zn4+oWoc=qA@mail.gmail.com
Don't think that the context "UPDATE tab SET var =" is a GUC-setting
command.
If we have "SET var =" but the "var" is not a known GUC variable,
don't offer any completions. The most likely explanation is that
we've misparsed the context and it's not really a GUC-setting command.
Per gripe from Ken Tanzer. Back-patch to 9.6. The issue exists
further back, but before 9.6 the code looks very different and it
doesn't actually know whether the "var" name matches anything,
so I desisted from trying to fix it.
Discussion: https://postgr.es/m/CAD3a31XpXzrZA9TT3BqLSHghdTK+=cXjNCE+oL2Zn4+oWoc=qA@mail.gmail.com
The previous rule was "primary key (if any) first, then other unique
indexes in name order, then all other indexes in name order".
But the preference for unique indexes seems a bit obsolete since the
introduction of exclusion constraints. It's no longer the case
that unique indexes are the only ones that constrain what data can
be in the table, and it's hard to see what other rationale there is
for separating out unique indexes. Other new features like the
possibility for some indexes to be INVALID (hence, not constraining
anything) make this even shakier.
Hence, simplify the sort order to be "primary key (if any) first,
then all other indexes in name order".
No documentation change, since this was never documented anyway.
A couple of existing regression test cases change output, though.
Discussion: https://postgr.es/m/14422.1561474929@sss.pgh.pa.us
a96c41f has introduced the option for heap, but it still lacked the
variant to control the behavior for toast relations.
While on it, refactor the tests so as they stress more scenarios with
the various values that vacuum_index_cleanup can use. It would be
useful to couple those tests with pageinspect to check that pages are
actually cleaned up, but this is left for later.
Author: Masahiko Sawada, Michael Paquier
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAD21AoCqs8iN04RX=i1KtLSaX5RrTEM04b7NHYps4+rqtpWNEg@mail.gmail.com
Fixes some problems introduced by 6e5f8d489a:
* When reusing conninfo data from the previous connection in \connect,
the host address should only be reused if it was specified as
hostaddr; if it wasn't, then 'host' is resolved afresh. We were
reusing the same IP address, which ignores a possible DNS change
as well as any other addresses that the name resolves to than the
one that was used in the original connection.
* PQhost, PQhostaddr: Don't present user-specified hostaddr when we have
an inet_net_ntop-produced equivalent address. The latter has been
put in canonical format, which is cleaner (so it produces "127.0.0.1"
when given "host=2130706433", for example).
* Document the hostaddr-reusing aspect of \connect.
* Fix some code comments
Author: Fabien Coelho
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20190527203713.GA58392@gust.leadboat.com
The following issues have been spotted:
- CREATE INDEX .. USING suggests both index and table AMs, but it should
consider only index AMs.
- CREATE TABLE .. USING has no completion support. USING was not being
included in the completion list where it should, and follow-up
suggestions for table AMs have been missing as well.
- CREATE ACCESS METHOD .. TYPE suggests only INDEX, with TABLE missing.
Author: Michael Paquier
Discussion: https://postgr.es/m/20190601191007.GC1905@paquier.xyz
We have a longstanding project convention that all .h files should
be includable with no prerequisites other than postgres.h. This is
tested/relied-on by cpluspluscheck. However, cpluspluscheck has not
historically been applied to most headers outside the src/include
tree, with the predictable consequence that some of them don't work.
Fix that, usually by adding missing #include dependencies.
The change in printf_hack.h might require some explanation: without
it, my C++ compiler whines that the function is unused. There's
not so many call sites that "inline" is going to cost much, and
besides all the callers are in test code that we really don't care
about the size of.
There's no actual bugs being fixed here, so I see no need to back-patch.
Discussion: https://postgr.es/m/b517ec3918d645eb950505eac8dd434e@gaz-is.ru
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Commit 41b54ba78e allowed not only VACUUM but also ANALYZE options
to take a boolean argument. But it forgot to update the documentation
for ANALYZE. This commit adds the descriptions about those ANALYZE
boolean options into the documentation.
This patch also updates tab-completion for ANALYZE boolean options.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwHTUt-kuwgiwe8f0AvTnB+ySqJWh95jvmh-qcoKW9YA9g@mail.gmail.com
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
Like the backend, the frontend has wrappers on top of malloc() and such
whose use is recommended. Particularly, it is possible to do memory
allocation without issuing an error. Some binaries missed the use of
those wrappers, so let's fix the gap for consistency.
This also fixes two latent bugs:
- In pg_dump/pg_dumpall when parsing an ACL item, on an out-of-memory
error for strdup(), the code considered the failure as a ACL parsing
problem instead of an actual OOM.
- In pg_waldump, an OOM when building the target directory string would
cause a crash.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/gY0y9xenfoBPc-Tufsr2Zg-MmkrJslm0Tw_CMg4p_j58-k_PXNC0klMdkKQkg61BkXC9_uWo-DcUzfxnHqpkpoR5jjVZrPHqKYikcHIiONhg=@yesql.se
* Remove one unnecessary pg_class join in SQL command. Not needed,
because we use a regclass cast instead.
* Doc: refer to "partitioned relations" rather than specifically tables,
since indexes are also displayed.
* Rename "On table" column to "Table", for consistency with \di.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20190407212525.GB10080@telsasoft.com
vacuum_truncate controls whether vacuum tries to truncate off
any empty pages at the end of the table. Previously vacuum always
tried to do the truncation. However, the truncation could cause
some problems; for example, ACCESS EXCLUSIVE lock needs to
be taken on the table during the truncation and can cause
the query cancellation on the standby even if hot_standby_feedback
is true. Setting this reloption to false can be helpful to avoid
such problems.
Author: Tsunakawa Takayuki
Reviewed-By: Julien Rouhaud, Masahiko Sawada, Michael Paquier, Kirk Jamison and Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE5UqFqSq1=kV3QtTUtXphTdyHA-8rAj4A=Y+e4kyp3BQ@mail.gmail.com
The new command lists partitioned relations (tables and/or indexes),
possibly with their sizes, possibly including partitioned partitions;
their parents (if not top-level); if indexes show the tables they belong
to; and their descriptions.
While there are various possible improvements to this, having it in this
form is already a great improvement over not having any way to obtain
this report.
Author: Pavel Stěhule, with help from Mathias Brossard, Amit Langote and
Justin Pryzby.
Reviewed-by: Amit Langote, Mathias Brossard, Melanie Plageman,
Michaël Paquier, Álvaro Herrera
This is intended for use mostly in test scripts for external tools,
which could do without cross-PG-version variations in error message
wording. Of course, the SQLSTATE isn't guaranteed stable either, but
it should be more so than the error message text.
Note: there's a bit of an ABI change for libpq here, but it seems
OK because if somebody compiles against a newer version of libpq-fe.h,
and then tries to pass PQERRORS_SQLSTATE to PQsetErrorVerbosity()
of an older libpq library, it will be accepted and then act like
PQERRORS_DEFAULT, thanks to the way the tests in pqBuildErrorMessage3
have historically been phrased. That seems acceptable.
Didier Gautheron, reviewed by Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAJRYxuKyj4zA+JGVrtx8OWAuBfE-_wN4sUMK4H49EuPed=mOBw@mail.gmail.com
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
Previously, while primary keys could be made on partitioned tables, it
was not possible to define foreign keys that reference those primary
keys. Now it is possible to do that.
Author: Álvaro Herrera
Reviewed-by: Amit Langote, Jesper Pedersen
Discussion: https://postgr.es/m/20181102234158.735b3fevta63msbj@alvherre.pgsql
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
This adds the CONCURRENTLY option to the REINDEX command. A REINDEX
CONCURRENTLY on a specific index creates a new index (like CREATE
INDEX CONCURRENTLY), then renames the old index away and the new index
in place and adjusts the dependencies, and then drops the old
index (like DROP INDEX CONCURRENTLY). The REINDEX command also has
the capability to run its other variants (TABLE, DATABASE) with the
CONCURRENTLY option (but not SYSTEM).
The reindexdb command gets the --concurrently option.
Author: Michael Paquier, Andreas Karlsson, Peter Eisentraut
Reviewed-by: Andres Freund, Fujii Masao, Jim Nasby, Sergei Kornilov
Discussion: https://www.postgresql.org/message-id/flat/60052986-956b-4478-45ed-8bd119e9b9cf%402ndquadrant.com#74948a1044c56c5e817a5050f554ddee
Introduce a third extended statistic type, supported by the CREATE
STATISTICS command - MCV lists, a generalization of the statistic
already built and used for individual columns.
Compared to the already supported types (n-distinct coefficients and
functional dependencies), MCV lists are more complex, include column
values and allow estimation of much wider range of common clauses
(equality and inequality conditions, IS NULL, IS NOT NULL etc.).
Similarly to the other types, a new pseudo-type (pg_mcv_list) is used.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed, David Rowley, Mark Dilger, Alvaro Herrera
Discussion: https://postgr.es/m/dfdac334-9cf2-2597-fb27-f0fb3753f435@2ndquadrant.com
When used on a partition containing foreign keys coming from one of its
ancestors, \d would (rather unhelpfully) print the details about the
pg_constraint row in the partition. This becomes a bit frustrating when
the user tries things like dropping the FK in the partition; instead,
show the details for the foreign key on the table where it is defined.
Also, when a table is referenced by a foreign key on a partitioned
table, we would show multiple "Referenced by" lines, one for each
partition, which gets unwieldy pretty fast. Modify that so that it
shows only one line for the ancestor partitioned table where the FK is
defined.
Discussion: https://postgr.es/m/20181204143834.ym6euxxxi5aeqdpn@alvherre.pgsql
Reviewed-by: Tom Lane, Amit Langote, Peter Eisentraut
Add command variants COMMIT AND CHAIN and ROLLBACK AND CHAIN, which
start new transactions with the same transaction characteristics as the
just finished one, per SQL standard.
Support for transaction chaining in PL/pgSQL is also added. This
functionality is especially useful when running COMMIT in a loop in
PL/pgSQL.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/28536681-324b-10dc-ade8-ab46f7645a5a@2ndquadrant.com
This adds a flag "deterministic" to collations. If that is false,
such a collation disables various optimizations that assume that
strings are equal only if they are byte-wise equal. That then allows
use cases such as case-insensitive or accent-insensitive comparisons
or handling of strings with different Unicode normal forms.
This functionality is only supported with the ICU provider. At least
glibc doesn't appear to have any locales that work in a
nondeterministic way, so it's not worth supporting this for the libc
provider.
The term "deterministic comparison" in this context is from Unicode
Technical Standard #10
(https://unicode.org/reports/tr10/#Deterministic_Comparison).
This patch makes changes in three areas:
- CREATE COLLATION DDL changes and system catalog changes to support
this new flag.
- Many executor nodes and auxiliary code are extended to track
collations. Previously, this code would just throw away collation
information, because the eventually-called user-defined functions
didn't use it since they only cared about equality, which didn't
need collation information.
- String data type functions that do equality comparisons and hashing
are changed to take the (non-)deterministic flag into account. For
comparison, this just means skipping various shortcuts and tie
breakers that use byte-wise comparison. For hashing, we first need
to convert the input string to a canonical "sort key" using the ICU
analogue of strxfrm().
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
Previously, \g would successfully execute the COPY command, but
the target specification if any was ignored, so that the data was
always dumped to the regular query output target. This seems like
a clear bug, so let's not just fix it but back-patch it.
While at it, adjust the documentation for \copy to recommend
"COPY ... TO STDOUT \g foo" as a plausible alternative.
Back-patch to 9.5. The problem exists much further back, but the
code associated with \g was refactored enough in 9.5 that we'd
need a significantly different patch for 9.4, and it doesn't
seem worth the trouble.
Daniel Vérité, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/15dadc39-e050-4d46-956b-dcc4ed098753@manitou-mail.org
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
This reverts commit c203d6cf8 and some follow-on fixes, completing the
task begun in commit 5d28c9bd7. If that feature is ever resurrected,
the code will look quite a bit different from this, so it seems best
to start from a clean slate.
The v11 branch is not touched; in that branch, the recheck_on_update
storage option remains present, but nonfunctional and undocumented.
Discussion: https://postgr.es/m/20190114223409.3tcvejfhlvbucrv5@alap3.anarazel.de
This fixes two issues with the completion of ALTER TABLE and ALTER INDEX
after SET STATISTICS is typed, trying to suggest schema objects while
the grammar only allows integers.
The tab completion of ALTER INDEX is made smarter by handling properly
more patterns. COLUMN is an optional keyword, but as no column numbers
can be suggested yet as possible input simply adjust the completion so
as no incorrect queries are generated.
Author: Michael Paquier
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/20181219092255.GC680@paquier.xyz
In passing, move the list of parameters where it can be used for both
CREATE TABLE and ALTER TABLE, and reorder it alphabetically.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/d8j1s77kdbb.fsf@dalvik.ping.uio.no
The following completion patterns are added:
- CREATE TABLE <name> with '(', OF or PARTITION OF.
- CREATE TABLE <name> OF with list of composite types.
- CREATE TABLE name (...) with PARTITION OF, WITH, TABLESPACE, ON
COMMIT (depending on the presence of a temporary table).
- CREATE TABLE ON COMMIT with actions (only for temporary tables).
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/d8j1s77kdbb.fsf@dalvik.ping.uio.no
This does not improve the security and reliability of the touched areas,
but it makes the style more consistent.
Author: Michael Paquier
Reviewed-by- Noah Misch
Discussion: https://postgr.es/m/20180309075538.GD9376@paquier.xyz
CREATE STATISTICS completion was checking manually for the start and end
of the parenthesised list of types. That works, but we now have a better
way to do that as commit 121213d9d taught word_matches() to allow '*' in
the middle of an alternative. But it only applied that to tab completion
for EXPLAIN, ANALYZE and VACUUM. Use it for CREATE STATISTICS too.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://www.postgresql.org/message-id/flat/d8jwooziy1s.fsf%40dalvik.ping.uio.no
"\pset format csv", or --csv, selects comma-separated values table format.
This is compliant with RFC 4180, except that we aren't too picky about
whether the record separator is LF or CRLF; also, the user may choose a
field separator other than comma.
This output format is directly compatible with the server's COPY CSV
format, and will also be useful as input to other programs. It's
considerably safer for that purpose than the old recommendation to
use "unaligned" format, since the latter couldn't handle data
containing the field separator character.
Daniel Vérité, reviewed by Fabien Coelho and David Fetter, some
tweaking by me
Discussion: https://postgr.es/m/a8de371e-006f-4f92-ab72-2bbe3ee78f03@manitou-mail.org
Commit eaf746a5b unintentionally made psql's "latex" output format
inaccessible, since not only "latex" but all abbreviations of it
were considered ambiguous against "latex-longtable". Let's go
back to the longstanding behavior that all shortened versions
mean "latex", and you have to write at least "latex-" to get
"latex-longtable". This leaves the only difference from pre-v12
behavior being that "\pset format a" is considered ambiguous.
The fact that the regression tests didn't expose this is pretty bad,
but fixing it is material for a separate commit.
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
In \d and \z, instead of conflating partitioned tables and indexes with
plain ones, set the "type" column and table title differently to make
the distinction obvious. A simple ease-of-use improvement.
Author: Pavel Stehule, Michaël Paquier, Álvaro Herrera
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAFj8pRDMWPgijpt_vPj1t702PgLG4Ls2NCf+rEcb+qGPpossmg@mail.gmail.com
When hostaddr is given, the actual IP address that psql is connected to
can be totally unexpected for the given host. The more verbose output
we now generate makes things clearer. Since the "host" and "hostaddr"
parts of the conninfo could come from different sources (say, one of
them is in the service specification or a URI-style conninfo and the
other is not), this is not as silly as it may first appear. This is
also definitely useful if the hostname resolves to multiple addresses.
Author: Fabien Coelho
Reviewed-by: Pavel Stehule, Arthur Zakirov
Discussion: https://postgr.es/m/alpine.DEB.2.21.1810261532380.27686@lancrehttps://postgr.es/m/alpine.DEB.2.21.1808201323020.13832@lancre
The previous behavior of preferring the oldest match had the advantage
of not breaking existing scripts when we add a conflicting format name;
but that behavior was undocumented and fragile (it seems just luck that
commit add9182e5 didn't break it). Let's go over to the less mistake-
prone approach of complaining when there are multiple matches.
Since this is a small compatibility break, no back-patch.
Daniel Vérité
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
This adds tab completion of the clauses WHEN and EXECUTE
FUNCTION|PROCEDURE clauses to CREATE EVENT TRIGGER, similar to CREATE
TRIGGER in the previous commit. This has version-dependent logic so as
FUNCTION is chosen over PROCEDURE for 11 and newer versions.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/d8jmur4q4yc.fsf@dalvik.ping.uio.no
The change to accept EXECUTE FUNCTION as well as EXECUTE PROCEDURE in
CREATE TRIGGER (added by 0a63f99) forgot to tell psql's tab completion
system about this. In passing, add tab completion of EXECUTE
FUNCTION/PROCEDURE after a complete WHEN ( … ) clause.
This change is version-aware, with FUNCTION being selected automatically
instead of PROCEDURE depending on the backend version, PROCEDURE being
an historical grammar kept for compatibility and considered as
deprecated in v11.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/d8jmur4q4yc.fsf@dalvik.ping.uio.no
PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
This replaces the "TailMatchesN" macros with just "TailMatches",
and likewise "HeadMatchesN" becomes "HeadMatches" and "MatchesN"
becomes "Matches". The various COMPLETE_WITH_LISTn macros are
reduced to COMPLETE_WITH, and the single-item COMPLETE_WITH_CONST
also gets folded into that. This eliminates a lot of minor
annoyance in writing tab-completion rules. Usefully, the compiled
code also gets a bit smaller (10% or so, on my machine).
The implementation depends on variadic macros, so we couldn't have
done this before we required C99.
Andres Freund and Thomas Munro; some cosmetic cleanup by me.
Discussion: https://postgr.es/m/d8jo9djvm7h.fsf@dalvik.ping.uio.no
You can't use "FOR TABLE" as a single Matches argument, because readline
will consider that input to be two words not one. It's necessary to make
the pattern contain two arguments.
The case accidentally worked anyway because the words_after_create
test fired ... but only for the first such table name.
Noted by Edmund Horner, though this isn't exactly his proposed fix.
Backpatch to v10 where the faulty code came in.
Discussion: https://postgr.es/m/CAMyN-kDe=gBmHgxWwUUaXuwK+p+7g1vChR7foPHRDLE592nJPQ@mail.gmail.com
Previously, we made no attempt to provide tab completion in these
statements' optional parenthesized options lists. This patch teaches
psql to do so.
To prevent the option completions from being offered after we've already
seen a complete parenthesized option list, it's necessary to improve
word_matches() so that it allows a wildcard '*' in the middle of an
alternative, not only at the end as formerly. That requires only a
little more code than before, and it allows us to test for "incomplete
parenthesized options" with a test like
else if (HeadMatches2("EXPLAIN", "(*") &&
!HeadMatches2("EXPLAIN", "(*)"))
In addition, add some logic to offer column names in the context of
"ANALYZE tablename ( ...", and likewise for VACUUM. This isn't real
complete; it won't offer column names again after a comma. But it's
better than before, and it doesn't take much code.
Justin Pryzby, reviewed at various times by Álvaro Herrera, Arthur
Zakirov, and Edmund Horner; some additional fixups by me
Discussion: https://postgr.es/m/20180529000623.GA21896@telsasoft.com
The previous convention was to use names based on the set of relkinds being
selected for, which was not at all helpful for maintenance, especially
since people had been quite inconsistent about whether to change the names
when they changed the relkinds being selected for. Instead, use names
based on the functionality we need the relation to have, following the
model established by Query_for_list_of_updatables.
While at it, sort the list of Query constants a bit better; it had the
distinct air of code-assembled-by-dartboard before.
Discussion: https://postgr.es/m/14830.1537481254@sss.pgh.pa.us
This should offer the same relation types that SELECT ... FROM would.
You can't select from an index for instance, so offering it here is
unhelpful. Noted while testing ilmari's recent patch.
We have the infrastructure to offer a list of tablespace names, but
it wasn't being used here; instead you got "FROM", "CURRENT", and "TO"
which aren't actually legal in this syntax.
Dagfinn Ilmari Mannsåker, reviewed by Arthur Zakirov
Discussion: https://postgr.es/m/d8jo9djvm7h.fsf@dalvik.ping.uio.no
Fix one untranslatable string concatenation in pg_rewind.
Fix one message in pg_verify_checksums to use a style use elsewhere
and avoid plural issues.
Fix one gratuitous abbreviation in psql.
* Include partitioned tables in what's offered after ANALYZE.
* Include toast_tuple_target in what's offered after ALTER TABLE ... SET|RESET.
* Include HASH in what's offered after PARTITION BY.
This is extracted from a larger patch; these bits seem like
uncontroversial bug fixes for v11 features, so back-patch them into v11.
Justin Pryzby
Discussion: https://postgr.es/m/20180529000623.GA21896@telsasoft.com
A cast declared WITH INOUT was described as '(binary coercible)',
which seems pretty inaccurate; let's print '(with inout)' instead.
Per complaint from Jean-Pierre Pelletier.
This definitely seems like a bug fix, but given that it's been wrong
since 8.4 and nobody complained before, I'm hesitant to back-patch a
behavior change into stable branches. It doesn't seem too late for
v11 though.
Discussion: https://postgr.es/m/5b887023.1c69fb81.ff96e.6a1d@mx.google.com
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
\conninfo prints the results of PQhost() and some other libpq functions.
It used to override the PQhost() result with the hostaddr parameter if
that'd been given, but that's unhelpful when multiple hosts were listed
in the connection string. Furthermore, it seems unnecessary in the wake
of commit 1944cdc98, since PQhost does any useful substitution itself.
So let's just remove the extra code and print PQhost()'s result without
any editorialization.
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
This is essential information when looking at an index that has
"included" columns. Per discussion, follow the style used in \dC
and some other places: column header is "Key?" and values are "yes"
or "no" (all translatable).
While at it, revise describeOneTableDetails to be a bit more maintainable:
avoid hard-wired column numbers and multiple repetitions of what needs
to be identical test logic. This also results in the emitted catalog
query corresponding more closely to what we print, which should be a
benefit to users of ECHO_HIDDEN mode, and perhaps a bit faster too
(the old logic sometimes asked for values it would not print, even
ones that are fairly expensive to get).
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
In a partition, row triggers that had been cloned from their parent
partitioned table would not be listed at all in psql's \d, which could
surprise users, per insistent complaint from Ashutosh Bapat (though his
aim was elsewhere). The simplest possible fix, suggested by Peter
Eisentraut, seems to be to list triggers marked as internal if they have
a row in pg_depend that points to some other trigger.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20180618165910.p26vhk7dpq65ix54@alvherre.pgsql
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Historically, tab completion for functions has offered the names of
aggregates as well. This is essential in at least one context, namely
GRANT/REVOKE, because there is no GRANT ON AGGREGATE syntax. There
are other cases where a command that nominally is for functions will
allow aggregates as well, though not all do.
Commit fd1a421fe changed this query to disallow aggregates, but that
doesn't seem to have been thought through very carefully. Change it
to allow aggregates (but still ignore procedures).
We might at some point tighten this up, but it'd require sorting through
all the uses of this query to see which ones should offer aggregate
names and which shouldn't. Given the lack of field complaints about
the historical laxity here, that's work I'm not eager to do right now.
Discussion: https://postgr.es/m/14268.1520283126@sss.pgh.pa.us
Up to now we've not worried about whether psql's tab completion queries
would work against prior server versions. But since we support older
server versions in describe.c, we really ought to do so here as well.
Failing to take care of this not only leads to loss of tab-completion
service when using an older server, but risks aborting a user's open
transaction when we send an incompatible query to the server.
The recent changes in pg_proc.prokind are one reason to take this more
seriously now than before, and the proposed patch for completion after
SELECT needs some such capability as well.
Hence, create some infrastructure to allow selection of one of several
versions of a query depending on server version. For cases where we
just need to select one of several query strings, introduce VersionedQuery
and COMPLETE_WITH_VERSIONED_QUERY(). Likewise extend the SchemaQuery
infrastructure to allow versioning of those.
I went ahead and fixed the prokind issues, to serve as an illustration
of how to use versioned SchemaQuery. To have some illustration of
VersionedQuery, change the support for completion of publication and
subscription names so that psql will not send sure-to-fail queries to
pre-v10 servers. There is much more that should be done to make tab
completion more friendly to older servers, but this commit is mainly
meant to get the infrastructure in place, so I stopped here.
Discussion: https://postgr.es/m/24314.1520190408@sss.pgh.pa.us
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Issuing 'quit'/'exit' in an empty psql buffer exits psql. Issuing
'quit'/'exit' in a non-empty psql buffer alone on a line with no prefix
whitespace issues a hint on how to exit.
Also add similar 'help' hints for 'help' in a non-empty psql buffer.
Reported-by: Everaldo Canuto
Discussion: https://postgr.es/m/flat/CALVFHFb-C_5_94hueWg6Dd0zu7TfbpT7hzsh9Zf0DEDOSaAnfA%40mail.gmail.com
Author: original author Robert Haas, modified by me
When a password is needed, cases such as
psql -d "postgresql://alice@localhost/testdb" -U bob
would incorrectly prompt for "Password for user bob: ", when actually the
connection will be attempted with username alice. The priority order of
which name to use isn't that important here, but the misleading prompt is.
When we are prompting for a password after initial connection failure,
we can fix this reliably by looking at PQuser(conn) to see how libpq
interpreted the connection arguments. But when we're doing a forced
password prompt because of a -W switch, we can't use that solution.
Fortunately, because the main use of -W is for noninteractive situations,
it's less critical to produce a helpful prompt in such cases. I made
the startup prompt for -W just say "Password: " all the time, rather
than expending extra code on trying to identify which username to use.
In the case of a \c command (after -W has been given), there's already
logic in do_connect that determines whether the "dbname" is a connstring
or URI, so we can avoid lobotomizing the prompt except in cases that
are actually dubious. (We could do similarly in startup.c if anyone
complains, but for now it seems not worthwhile, especially since that
would still be only a partial solution.)
Per bug #15025 from Akos Vandra. Although this is arguably a bug fix,
it doesn't seem worth back-patching. The case where it matters seems
like a very corner-case usage, and someone might complain that we'd
changed the behavior of -W in a minor release.
Discussion: https://postgr.es/m/20180123130013.7407.24749@wrigleys.postgresql.org
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
Various Perl scripts we use to generate files were in the habit of
printing things like "generated by $0" into their output files.
That looks like a fine idea at first glance, but it results in
non-reproducible output, because in VPATH builds $0 won't be just
the name of the script file, but a full path for it. We'd prefer
that you get identical results whether using VPATH or not, so this
is a bad thing.
Some of these places also printed their input file name(s), causing
an additional hazard of the same type.
Hence, establish a policy that thou shalt not print $0, nor input file
pathnames, into output files (they're still allowed in error messages,
though). Instead just write the script name verbatim. While we are at
it, we can make these annotations more useful by giving the script's
full relative path name within the PG source tree, eg instead of
Gen_fmgrtab.pl let's print src/backend/utils/Gen_fmgrtab.pl.
Not all of the changes made here actually affect any files shipped
in finished tarballs today, but it seems best to apply the policy
everyplace so that nobody copies unsafe code into places where it
could matter.
Christoph Berg and Tom Lane
Discussion: https://postgr.es/m/20171215102223.GB31812@msg.df7cb.de
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Hash partitioning is useful when you want to partition a growing data
set evenly. This can be useful to keep table sizes reasonable, which
makes maintenance operations such as VACUUM faster, or to enable
partition-wise join.
At present, we still depend on constraint exclusion for partitioning
pruning, and the shape of the partition constraints for hash
partitioning is such that that doesn't work. Work is underway to fix
that, which should both improve performance and make partitioning
pruning work with hash partitioning.
Amul Sul, reviewed and tested by Dilip Kumar, Ashutosh Bapat, Yugo
Nagata, Rajkumar Raghuwanshi, Jesper Pedersen, and by me. A few
final tweaks also by me.
Discussion: http://postgr.es/m/CAAJ_b96fhpJAP=ALbETmeLk1Uni_GFZD938zgenhF49qgDTjaQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Queries running with some non-pg_catalog schema frontmost in their search
path need to be careful to schema-qualify type names that should be sought
in pg_catalog. Vitaly Burovoy reported an oversight of this sort in
pg_dump's dumpSequence, and grepping detected another one in psql's
describeOneTableDetails, both introduced by sequence-related changes in
v10. In pg_dump, we can fix things by removing the cast altogether, since
it doesn't really matter what data types are reported for these query
result columns. Likewise in psql, the query seemed to be working unduly
hard to get a result that's guaranteed to be exactly 'bigint'.
I also changed a couple of occurrences of "::char" similarly. These are
not bugs, since "char" is a typename keyword and not subject to search_path
rules, but it seems better to use uniform style.
Vitaly Burovoy and Tom Lane
Discussion: https://postgr.es/m/CAKOSWN=ds66zLw2SqkLTM8wbXFgDbc_OdkmT3dJfPT2mE5kipA@mail.gmail.com
It seems that the parray_gin extension has seen fit to introduce a
"text[] @> text[]" operator, which conflicts with the core
"anyarray @> anyarray" operator, causing ambiguous-operator failures
if the input arguments are coercible to text[] without being exactly
that type. This strikes me as a bad idea, but it's out there and
people use it. As of v10, that breaks psql's query that tries to
test "pg_statistic_ext.stxkind @> '{d}'", since stxkind is char[].
The best workaround seems to be to avoid use of that operator.
We can use a scalar-vs-array test "'d' = any(stxkind)" instead;
that's arguably more readable anyway.
Per report from Justin Pryzby. Backpatch to v10 where this
query was added.
Discussion: https://postgr.es/m/20171022181525.GA21884@telsasoft.com
Flex generates a lot of functions that are not actually used. In order
to avoid coverage figures being ruined by that, mark up the part of the
.l files where the generated code appears by lcov exclusion markers.
That way, lcov will typically only reported on coverage for the .l file,
which is under our control, but not for the .c file.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This pg_send_history() call is unreachable, since the block it's in
is currently only entered in !cur_cmd_interactive mode. But rather
than just delete it, make it #ifdef NOT_USED, in hopes that we'll
remember to enable it if we ever change that decision.
Per report from David Binderman. Since this is basically cosmetic,
I see no great need to back-patch.
Discussion: https://postgr.es/m/HE1PR0802MB233122B61F00A15E035C83BE9C710@HE1PR0802MB2331.eurprd08.prod.outlook.com
If \d rather than \d+ is used, then verbose is false and we don't ask
the server for the partition constraint; so we shouldn't print it in
that case either.
Maksim Milyutin, per a report from Jesper Pedersen. Reviewed by
Jesper Pedersen and Amit Langote.
Discussion: http://postgr.es/m/2af5fc4d-7bcc-daa8-4fe6-86274bea363c@redhat.com
For \d sequencename, the psql code just did SELECT * FROM sequencename
to get the information to display, but this does not contain much
interesting information anymore in PostgreSQL 10, because the metadata
has been moved to a separate system catalog.
This patch creates a newly designed sequence display that is not merely
an extension of the general relation/table display as it was previously.
Example:
PostgreSQL 9.6:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
---------------+---------+---------------------
sequence_name | name | foobar
last_value | bigint | 1
start_value | bigint | 1
increment_by | bigint | 1
max_value | bigint | 9223372036854775807
min_value | bigint | 1
cache_value | bigint | 1
log_cnt | bigint | 0
is_cycled | boolean | f
is_called | boolean | f
PostgreSQL 10 before this change:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
------------+---------+-------
last_value | bigint | 1
log_cnt | bigint | 0
is_called | boolean | f
New:
=> \d foobar
Sequence "public.foobar"
Type | Start | Minimum | Maximum | Increment | Cycles? | Cache
--------+-------+---------+---------------------+-----------+---------+-------
bigint | 1 | 1 | 9223372036854775807 | 1 | no | 1
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
This patch adds ERROR, SQLSTATE, and ROW_COUNT, which are updated after
every query, as well as LAST_ERROR_MESSAGE and LAST_ERROR_SQLSTATE,
which are updated only when a query fails. The expected usage of these
is for scripting.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704042158020.12290@lancre
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
Index columns are referenced by ordinal number rather than name, e.g.
CREATE INDEX coord_idx ON measured (x, y, (z + t));
ALTER INDEX coord_idx ALTER COLUMN 3 SET STATISTICS 1000;
Incompatibility note for release notes:
\d+ for indexes now also displays Stats Target
Authors: Alexander Korotkov, with contribution by Adrien NAYRAT
Review: Adrien NAYRAT, Simon Riggs
Wordsmith: Simon Riggs
This command acts somewhat like \g, but instead of executing the query
buffer, it merely prints a description of the columns that the query
result would have. (Of course, this still requires parsing the query;
if parse analysis fails, you get an error anyway.) We accomplish this
using an unnamed prepared statement, which should be invisible to psql
users.
Pavel Stehule, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/CAFj8pRBhYVvO34FU=EKb=nAF5t3b++krKt1FneCmR0kuF5m-QA@mail.gmail.com
We already had a psql variable VERSION that shows the verbose form of
psql's own version. Add VERSION_NAME to show the short form (e.g.,
"11devel") and VERSION_NUM to show the numeric form (e.g., 110000).
Also add SERVER_VERSION_NAME and SERVER_VERSION_NUM to show the short and
numeric forms of the server's version. (We'd probably add SERVER_VERSION
with the verbose string if it were readily available; but adding another
network round trip to get it seems too expensive.)
The numeric forms, in particular, are expected to be useful for scripting
purposes, now that psql can do conditional tests.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704020917220.4632@lancre
The previous format with variable names and descriptions in separate
columns was extremely constraining about the length of the descriptions.
We'd dealt with that in several inconsistent ways over the years,
including letting the lines run over 80 characters, breaking descriptions
into multiple lines, or shoving the description onto a separate line.
But it's been a long time since the output could realistically fit onto
a single screen vertically, so let's just rely even more heavily on the
pager to deal with the vertical distance, and split each entry into two
(or more) lines, in the format
variable-name
variable description goes here
Each variable name + description remains a single translatable string,
in hopes of reducing translator confusion; we're just changing the
embedded whitespace.
I failed to resist the temptation to copy-edit one or two of the
descriptions while at it.
Discussion: https://postgr.es/m/2947.1504542679@sss.pgh.pa.us
Change to appendStringInfoChar() or appendStringInfoString() where those
can be used.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Most functions in this file are content to print an empty table if there
are no matching objects. In some, the behavior is to loop over all
matching objects and print a table for each one; therefore, without any
extra logic, nothing at all would be printed if no objects match.
We accept that outcome in QUIET mode, but in normal mode it seems better
to print a helpful message. The new \dRp+ command had not gotten that
memo; fix it.
listDbRoleSettings() is out of step on this, but I think it's better for
it to print a custom message rather than an empty table, because of the
possibility that the user is confused about what the pattern arguments mean
or which is which. The original message wording was entirely useless for
clarifying that, though, not to mention being unlike the wordings used
elsewhere. Improve the text, and also print the messages with psql_error
as is the general custom here.
listTables() is also out in left field, but since it's such a heavily
used function, I'm hesitant to change its behavior so much as to print
an empty table rather than a custom message. People are probably used
to getting a message. But we can make the wording more standardized and
helpful, and print it with psql_error rather than printing to stdout.
In both listDbRoleSettings and listTables, we play dumb and emit an
empty table, not a custom message, in QUIET mode. That was true before
and I see no need to change it.
Several of the places printing such messages risked dumping core if
no pattern string had been provided; make them more wary. (This case
is presently unreachable in describeTableDetails; but it shouldn't be
assuming that command.c will never pass it a null. The text search
functions would only reach the case if a database contained no text
search objects, which is also currently impossible since we pin the
built-in objects, but again it seems unwise to assume that here.)
Daniel Gustafsson, tweaked a bit by me
Discussion: https://postgr.es/m/3641F19B-336A-431A-86CE-A80562505C5E@yesql.se
Most places were already using the PQExpBuffer library for constructing
variable-length strings; bring the two stragglers into line.
describeOneTSParser was living particularly dangerously since it wasn't
even using snprintf().
Daniel Gustafsson
Discussion: https://postgr.es/m/3641F19B-336A-431A-86CE-A80562505C5E@yesql.se
listDbRoleSettings() handled its server version check randomly differently
from every other comparable function in describe.c, not only as to code
layout but also message wording. It also leaked memory, because its
PQExpBuffer management was also unlike everyplace else (and wrong).
Also fix an error-case leak in add_tablespace_footer().
In passing, standardize the format of function header comments in
describe.c --- we usually put "/*" alone on a line.
Daniel Gustafsson, memory leak fixes by me
Discussion: https://postgr.es/m/3641F19B-336A-431A-86CE-A80562505C5E@yesql.se
\drds leaked its second pattern argument if any, and \connect leaked
any empty-string or "-" arguments. These are old bugs, but it's hard
to imagine any real use-case where the leaks could amount to anything
meaningful, so not bothering with a back-patch.
Daniel Gustafsson and Tom Lane
Discussion: https://postgr.es/m/3641F19B-336A-431A-86CE-A80562505C5E@yesql.se
Fix assorted places that had not bothered with the convention of
prefixing catalog and function names with "pg_catalog.". That
could possibly result in query failure when running with a nondefault
search_path. Also fix two places that weren't quoting OID literals.
I think the latter hasn't mattered much since about 7.3, but it's still
a bad idea to be doing it in 99 places and not in 2 others.
Also remove a useless EXISTS sub-select that someone had stuck into
describeOneTableDetails' queries for child tables. We just got the OID
out of pg_class, so I hardly see how checking that it exists in pg_class
was doing anything helpful.
In passing, try to improve the emitted formatting of a couple of
these queries, though I didn't work really hard on that. And merge
unnecessarily duplicative coding in some other places.
Much of this was new in HEAD, but some was quite old; back-patch
as appropriate.
In the frontend Makefiles that pull in libpgfeutils, we'd generally
done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport)
That method is badly broken, as seen in bug #14742 from Chris Ruprecht.
The -L flag for src/fe_utils ends up being placed after whatever random
-L flags are in LDFLAGS already. That puts us at risk of pulling in
libpgfeutils.a from some previous installation rather than the freshly
built one in src/fe_utils. Also, the lack of an "override" is hazardous
if someone tries to specify some LDFLAGS on the make command line.
The correct way to do it is like this:
override LDFLAGS := -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport) $(LDFLAGS)
so that libpgfeutils, along with libpq, libpgport, and libpgcommon, are
guaranteed to be pulled in from the build tree and not from any referenced
system directory, because their -L flags will appear first.
In some places we'd been even lazier and done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils -lpq
which is subtly wrong in an additional way: on platforms where we can't
restrict the symbols exported by libpq.so, it allows libpgfeutils to
latch onto libpgport and libpgcommon symbols from libpq.so, rather than
directly from those static libraries as intended. This carries hazards
like those explained in the comments for the libpq_pgport macro.
In addition to fixing the broken libpgfeutils usages, I tried to
standardize on using $(libpq_pgport) like so:
override LDFLAGS := $(libpq_pgport) $(LDFLAGS)
even where libpgfeutils is not in the picture. This makes no difference
right now but will hopefully discourage future mistakes of the same ilk.
And it's more like the way we handle CPPFLAGS in libpq-using Makefiles.
In passing, just for consistency, make pgbench include PTHREAD_LIBS the
same way everyplace else does, ie just after LIBS rather than in some
random place in the command line. This might have practical effect if
there are -L switches in that macro on some platform.
It looks to me like the MSVC build scripts are not affected by this
error, but someone more familiar with them than I might want to double
check.
Back-patch to 9.6 where libpgfeutils was introduced. In 9.6, the hazard
this error creates is that a reinstallation might link to the prior
installation's copy of libpgfeutils.a and thereby fail to absorb a
minor-version bug fix.
Discussion: https://postgr.es/m/20170714125106.9231.13772@wrigleys.postgresql.org
Update the documentation for \pset to mention
columns|linestyle|pager_min_lines. Add various mentions of \pset
command equivalences that were previously inconsistent.
Author: Дилян Палаузов <dpa-postgres@aegee.org>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Viewing a table with \d in psql also shows the publications at table is
in. If a publication is concurrently dropped, this shows an error,
because the view pg_publication_tables internally uses
pg_get_publication_tables(), which uses a catalog snapshot. This can be
particularly annoying if a for-all-tables publication is concurrently
dropped.
To avoid that, write the query in psql differently. Expose the function
pg_relation_is_publishable() to SQL and write the query using that.
That still has a risk of being affected by concurrent catalog changes,
but in this case it would be a table drop that causes problems, and then
the psql \d command wouldn't be interesting anymore anyway.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
Show "All tables" property in \dRp and \dRp+. Don't list tables for
such publications in \dRp+, since it's redundant and the list could be
very long.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Jeff Janes <jeff.janes@gmail.com>
\if and related commands were overlooked here, as were \dRp and \dRs
from the logical-replication patch, as was \?.
While here, reformat the list to put each new first command letter on
a separate line; perhaps that will limit the need to reflow the whole
list when we add more commands in future.
Masahiko Sawada (reformatting by me)
Discussion: https://postgr.es/m/CAD21AoDW1QHtBsM33hV+Fg2mYEs+FWj4qtoCU72AwHAXQ3U6ZQ@mail.gmail.com
If a FOR ALL TABLES publication was present, \d of a table would claim
for each table that it was part of the publication, even for tables that
are ignored for this purpose, such as system tables and unlogged tables.
Fix the query by using the function pg_get_publication_tables(), which
was intended for this purpose.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>