Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux. open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.
Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option. Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.
In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.
Back-patch to all supported branches, since any of them might get used
on modern Linux versions.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.
Dimitri Fontaine, with assorted corrections and other kibitzing.
status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
supplied, also print the IP address. This allows IPv4 and IPv6 failures
to be distinguished. Also useful when a hostname resolves to multiple
IP addresses.
Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
Also, move index entries into the tables, closer to the function description,
for easier editing in the future. Resort some tables to be more alphabetical.
Remove the entries for count, max, min, and sum in the tutorial area, because
that was felt to be confusing.
Thom Brown
Currently, three conversion format specifiers are supported: %s for a
string, %L for an SQL literal, and %I for an SQL identifier. The latter
two are deliberately designed not to overlap with what sprintf() already
supports, in case we want to add more of sprintf()'s functionality here
later.
Patch by Pavel Stehule, heavily revised by me. Reviewed by Jeff Janes
and, in earlier versions, by Itagaki Takahiro and Tom Lane.
In the previous coding, we simply issued ALTER SEQUENCE RESTART commands,
which do not roll back on error. This meant that an error between
truncating and committing left the sequences out of sync with the table
contents, with potentially bad consequences as were noted in a Warning on
the TRUNCATE man page.
To fix, create a new storage file (relfilenode) for a sequence that is to
be reset due to RESTART IDENTITY. If the transaction aborts, we'll
automatically revert to the old storage file. This acts just like a
rewriting ALTER TABLE operation. A penalty is that we have to take
exclusive lock on the sequence, but since we've already got exclusive lock
on its owning table, that seems unlikely to be much of a problem.
The interaction of this with usual nontransactional behaviors of sequence
operations is a bit weird, but it's hard to see what would be completely
consistent. Our choice is to discard cached-but-unissued sequence values
both when the RESTART is executed, and at rollback if any; but to not touch
the currval() state either time.
In passing, move the sequence reset operations to happen before not after
any AFTER TRUNCATE triggers are fired. The previous ordering was not
logically sensible, but was forced by the need to minimize inconsistency
if the triggers caused an error. Transactional rollback is a much better
solution to that.
Patch by Steve Singer, rather heavily adjusted by me.
This new field counts the number of times that a backend which writes a
buffer out to the OS must also fsync() it. This happens when the
bgwriter fsync request queue is full, and is generally detrimental to
performance, so it's good to know when it's happening. Along the way,
log a new message at level DEBUG1 whenever we fail to hand off an fsync,
so that the problem can also be seen in examination of log files
(if the logging level is cranked up high enough).
Greg Smith, with minor tweaks by me.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
Explicitly document that the -o options of pg_ctl init mode are meant
for initdb, not postgres (Euler Taveira de Oliveira). Assorted other
copy-editing (Tom).
PG 8.4 added a built-in feature for casting pretty much any data type to
string types (text, varchar, etc). We allowed this to work in any of the
historically-allowed syntaxes: CAST(x AS text), x::text, text(x), or
x.text. However, multiple complaints have shown that it's too easy to
invoke such casts unintentionally in the latter two styles, particularly
field selection. To cure the problem with the narrowest possible change
of behavior, disallow use of I/O conversion casts from composite types to
string types via functional/attribute syntax. The new functionality is
still available via cast syntax.
In passing, document the equivalence of functional and attribute syntax
in a more visible place.
\dn without "S" now hides all pg_XXX schemas as well as information_schema.
Thus, in a bare database you'll only see "public". ("public" is considered
a user schema, not a system schema, mainly because it's droppable.)
Per discussion back in late September.
WAL-logged. Make the notice about the lack of WAL-logging more visible by
making it a <caution>. Also remove the false statement from hot standby
caveats section that hash indexes are not used during hot standby.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
This patch eliminates various bizarre behaviors caused by sloppy thinking
about the difference between a domain type and its underlying array type.
In particular, the operation of updating one element of such an array
has to be considered as yielding a value of the underlying array type,
*not* a value of the domain, because there's no assurance that the
domain's CHECK constraints are still satisfied. If we're intending to
store the result back into a domain column, we have to re-cast to the
domain type so that constraints are re-checked.
For similar reasons, such a domain can't be blindly matched to an ANYARRAY
polymorphic parameter, because the polymorphic function is likely to apply
array-ish operations that could invalidate the domain constraints. For the
moment, we just forbid such matching. We might later wish to insert an
automatic downcast to the underlying array type, but such a change should
also change matching of domains to ANYELEMENT for consistency.
To ensure that all such logic is rechecked, this patch removes the original
hack of setting a domain's pg_type.typelem field to match its base type;
the typelem will always be zero instead. In those places where it's really
okay to look through the domain type with no other logic changes, use the
newly added get_base_element_type function in place of get_element_type.
catversion bumped due to change in pg_type contents.
Per bug #5717 from Richard Huxton and subsequent discussion.
Tom Lane
Simon Riggs
Robert Haas
Heikki Linnakangas
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Andrew Dunstan