Don't try to be precise about it, just use a constant 16 bytes of
chunk overhead. Being smarter would require knowing the memory context
where the chunk will be allocated, which is not known by all callers.
Discussion: https://postgr.es/m/20200325220936.il3ni2fj2j2b45y5@alap3.anarazel.de
Commit 0d8c9c1210 allowed BASE_BACKUP to
acquire a ResourceOwner without a transaction so that the backup
manifest functionality could use a BufFile, but it overlooked the fact
that when a walsender is used with replication=database, it might have
a transaction in progress, because in that mode, SQL and replication
commands can be mixed. Try to fix things up so that the two cleanup
mechanisms don't conflict.
Per buildfarm member serinus, which triggered the problem when
CREATE_REPLICATION_SLOT failed from inside a transaction. It passed
on the subsequent run, so evidently the failure doesn't happen every
time.
lapwing is complaining that about a call to pg_gmtime, saying that
it "expected 'const pg_time_t *' but argument is of type 'time_t *'".
I at first thought that the problem had someting to do with const,
but Thomas Munro suggested that it might be just because time_t
and pg_time_t are different identifers. lapwing is i686 rather than
x86_64, and pg_time_t is always int64, so that seems like a good
guess.
There is other code that just casts time_t to pg_time_t without
any conversion function, so try that approach here.
Introduced in commit 0d8c9c1210.
It may be necessary to go further and remove this test altogether,
but I'm going to try this fix first. It's not clear, at least to
me, exactly how this is breaking buildfarm members, but it appears
to be doing so.
Move have_partkey_equi_join and match_expr_to_partition_keys to
relnode.c, since they're used only there. Refactor
build_joinrel_partition_info to split out the code that fills the
joinrel's partition key lists; this doesn't have any non-cosmetic
impact, but it seems like a useful separation of concerns.
Improve assorted nearby comments.
Amit Langote, with a little further editorialization by me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
The buildfarm is very unhappy right now because TAP test
003_corruption.pl uses TestLib::tempdir to generate the name of
a temporary directory that is used as a tablespace name, and
this results in a 'symbolic link target too long' error message
on many of the buildfarm machines, but not on my machine.
It appears that other people have run into similar problems in
the past and that TestLib::tempdir_short was the solution, so
let's try using that instead.
It seems that we have a policy that every Perl subroutine should
end with an explicit "return", so add explicit "return"
statements to all the new subroutines added by my prior
commit 0d8c9c1210.
Per buildfarm.
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
This commit revives the original commit ed7a509571 that was reverted by
commit 19db23bcbd. The original commit had to be reverted because
it caused the regression test failure on the buildfarm members prion and
dory. But since commit c0885c4c30 got rid of the caues of the test failure,
the original commit can be safely introduced again.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
entryGetItem()'s three code paths each contained bugs associated
with filtering the entries for gin_fuzzy_search_limit.
The posting-tree path failed to advance "advancePast" after having
decided to filter an item. If we ran out of items on the current
page and needed to advance to the next, what would actually happen
is that entryLoadMoreItems() would re-load the same page. Eventually,
the random dropItem() test would accept one of the same items it'd
previously rejected, and we'd move on --- but it could take awhile
with small gin_fuzzy_search_limit. To add insult to injury, this
case would inevitably cause entryLoadMoreItems() to decide it needed
to re-descend from the root, making things even slower.
The posting-list path failed to implement gin_fuzzy_search_limit
filtering at all, so that all entries in the posting list would
be returned.
The bitmap-result path used a "gotitem" variable that it failed to
update in the one place where it'd actually make a difference, ie
at the one "continue" statement. I think this was unreachable in
practice, because if we'd looped around then it shouldn't be the
case that the entries on the new page are before advancePast.
Still, the "gotitem" variable was contributing nothing to either
clarity or correctness, so get rid of it.
Refactor all three loops so that the termination conditions are
more alike and less unreadable.
The code coverage report showed that we had no coverage at all for
the re-descend-from-root code path in entryLoadMoreItems(), which
seems like a very bad thing, so add a test case that exercises it.
We also had exactly no coverage for gin_fuzzy_search_limit, so add a
simplistic test case that at least hits those code paths a little bit.
Back-patch to all supported branches.
Adé Heyward and Tom Lane
Discussion: https://postgr.es/m/CAEknJCdS-dE1Heddptm7ay2xTbSeADbkaQ8bU2AXRCVC2LdtKQ@mail.gmail.com
The explain regression test runs EXPLAIN commands via the function
that filters unstable outputs. To produce more stable test output,
this commit improves the function so that it also filters out text-mode
Buffers lines. This is necessary because text-mode Buffers lines vary
depending the system state.
This improvement will get rid of the regression test failure that
the commit ed7a509571 caused on the buildfarm members prion and
dory because of the instability of Buffers lines.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20200403025751.GB1759@paquier.xyz
More work is still needed, but this is a good start.
Co-authored-by: Corey Huinker <corey.huinker@gmail.com>
Co-authored-by: Jürgen Purtz <juergen@purtz.de>
Co-authored-by: Roger Harkavy <rogerharkavy@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CADkLM=eP6HOeqDjn0FdXuGRusQu4oWH_LFsKjjafmhvWD=aSpQ@mail.gmail.com
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
This commit introduces new wait events RecoveryConflictSnapshot and
RecoveryConflictTablespace. The former is reported while waiting for
recovery conflict resolution on a vacuum cleanup. The latter is reported
while waiting for recovery conflict resolution on dropping tablespace.
Also this commit changes the code so that the wait event Lock is reported
while waiting in ResolveRecoveryConflictWithVirtualXIDs() for recovery
conflict resolution on a lock. Basically the wait event Lock is reported
during that wait, but previously was not reported only when that wait
happened in ResolveRecoveryConflictWithVirtualXIDs().
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
This option is similar to \gset, except that it is able to store all
results from combined SQL queries into separate variables. If a query
returns multiple rows, the last result is stored and if a query returns
no rows, nothing is stored.
While on it, add a TAP test for \gset to check for a failure when a
query returns multiple rows.
Author: Fabien Coelho
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904081914200.2529@lancre
When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
The primary motivation for this change is that it will be used by the
upcoming patch to add backup manifests, but it also seems to have some
potential more general use.
Andres Freund and Robert Haas
Discussion: http://postgr.es/m/20200330020814.nspra4mvby42yoa4@alap3.anarazel.de
Instead of disabling autovacuum on these test tables, adjust the
partition boundaries so that the child partitions are not all the
same size. That should cause the planner to use a predictable
ordering of the per-partition scan nodes even in cases where
autovacuum causes the rowcount estimates to be off a bit.
Moreover, this also lets these tests show that the planner does
properly order the tables in descending size order, something
that wasn't being proven before.
The pagg_tab1 and pagg_tab2 partitions are still all the same
size, but that should be fine, because those tables are so small
that (1) autovacuum won't fire on them, and (2) even if it did,
it couldn't change the reltuples value --- with only one page,
it can't see just part of the relation.
Discussion: https://postgr.es/m/24467.1585838693@sss.pgh.pa.us
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
In b07642dbc, we added code to trigger autovacuums based on the number of
INSERTs into a table. This seems to have cause some destabilization of
the regression tests. Likely this is due to an autovacuum triggering
mid-test and (per theory from Tom Lane) one of the test's queries causes
autovacuum to skip some number of pages, resulting in the reltuples
estimate changing.
The failure that this is attempting to fix is around the order of subnodes
in an Append. Since the planner orders these according to the subnode
cost, then it's possible that a small change in the reltuples value changes
the subnode's cost enough that it swaps position with one of its fellow
subnodes.
The failure here only seems to occur on slower buildfarm machines. In this
case, lousyjack, which seems have taken over 8 minutes to run just
the partitionwise_aggregate test. Such a slow run would increase the
chances that the autovacuum launcher would trigger a vacuum mid-test.
Faster machines run this test in sub second time, so have a much smaller
window for an autovacuum to trigger.
Here we fix this by disabling autovacuum on all tables created in the test.
Additionally, this reverts the change made in the
partitionwise_aggregate test in 2dc16efed.
Discussion: https://postgr.es/m/22297.1585797192@sss.pgh.pa.us
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
Commit 40d964ec99 allowed vacuum command to process indexes in parallel but
forgot to accumulate the buffer usage stats of parallel workers. This
allows leader backend to accumulate buffer usage stats of all the parallel
workers.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Amit Kapila and Julien Rouhaud
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Fix lquery parsing to handle repeated flag characters correctly,
and to enforce the max label length correctly in some cases where
it did not before, and to detect empty labels in some cases where
it did not before.
In a more cosmetic vein, use a switch rather than if-then chains to
handle the different states, and avoid unnecessary checks on charlen
when looking for ASCII characters, and factor out multiple copies of
the label length checking code.
Tom Lane and Dmitry Belyavsky
Discussion: https://postgr.es/m/CADqLbzLVkBuPX0812o+z=c3i6honszsZZ6VQOSKR3VPbB56P3w@mail.gmail.com
Not much to say here --- does what it says on the tin. The "binary"
representation in each case is really just the same as the text format,
though we prefix a version-number byte in case anyone ever feels
motivated to change that. Thus, there's not any expectation of improved
speed or reduced space; the point here is just to allow clients to use
binary format for all columns of a query result or COPY data.
This makes use of the recently added ALTER TYPE support to add binary
I/O functions to an existing data type. As in commit a80818605,
we can piggy-back on there already being a new-for-v13 version of the
ltree extension, so we don't need a new update script file.
Nino Floris, reviewed by Alexander Korotkov and myself
Discussion: https://postgr.es/m/CANmj9Vxx50jOo1L7iSRxd142NyTz6Bdcgg7u9P3Z8o0=HGkYyQ@mail.gmail.com
We require the partition key to be a subset of the set of columns
being made unique, so that physically-separate indexes on the different
partitions are sufficient to enforce the uniqueness constraint.
The existing code checked that the listed columns appear, but did not
inquire into the index semantics, which is a serious oversight given
that different index opclasses might enforce completely different
notions of uniqueness.
Ideally, perhaps, we'd just match the partition key opfamily to the
index opfamily. But hash partitioning uses hash opfamilies which we
can't directly match to btree opfamilies. Hence, look up the equality
operator in each family, and accept if it's the same operator. This
should be okay in a fairly general sense, since the equality operator
ought to precisely represent the opfamily's notion of uniqueness.
A remaining weak spot is that we don't have a cross-index-AM notion of
which opfamily member is "equality". But we know which one to use for
hash and btree AMs, and those are the only two that are relevant here
at present. (Any non-core AMs that know how to enforce equality are
out of luck, for now.)
Back-patch to v11 where this feature was introduced.
Guancheng Luo, revised a bit by me
Discussion: https://postgr.es/m/D9C3CEF7-04E8-47A1-8300-CA1DCD5ED40D@gmail.com
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
The previously listed total of 179 does not appear to be correct for
SQL:2016 anymore. (Previous SQL versions had slightly different
feature sets, so it's plausible that it was once correct.) The
currently correct count is the number of rows in the respective tables
in appendix F in SQL parts 2 and 11, minus 2 features that are listed
twice. Thus the correct count is currently 177. This also matches
the number of Core entries the built documentation currently shows, so
it's internally consistent.
Old versions of opclass parameters patch supported ability to specify DEFAULT
as the opclass name in CREATE INDEX command. This ability was removed in the
final version, but 911e702077 still mentions that in the documentation.
In a psql session, if the connection to the server is abruptly cut, the
referenced connection would become NULL as of CheckConnection(). This
could cause a hard crash with psql if attempting to connect by reusing
the past connection's data because of a null-pointer dereference with
either PQhost() or PQdb(). This issue is fixed by making sure that no
reuse of the past connection is done if it does not exist.
Issue has been introduced by 6e5f8d4, so backpatch down to 12.
Reported-by: Hugh Wang
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/16330-b34835d83619e25d@postgresql.org
Backpatch-through: 12
The coverity complained that dividing integer expressions and then
converting the integer quotient to type "double" would lose fractional
part. Typecasting one of the arguments of expression with double should
fix the report.
Author: Mahendra Singh Thalor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20200329224818.6phnhv7o2q2rfovf@alap3.anarazel.de
pg_rewind needs to copy from the source cluster to the target cluster a
set of relation blocks changed from the previous checkpoint where WAL
forked up to the end of WAL on the target. Building this list of
relation blocks requires a range of WAL segments that may not be present
anymore on the target's pg_wal, causing pg_rewind to fail. It is
possible to work around this issue by copying manually the WAL segments
needed but this may lead to some extra and actually useless work.
This commit introduces a new option allowing pg_rewind to use a
restore_command while doing the rewind by grabbing the parameter value
of restore_command from the target cluster configuration. This allows
the rewind operation to be more reliable, so as only the WAL segments
needed by the rewind are restored from the archives.
In order to be able to do that, a new routine is added to src/common/ to
allow frontend tools to restore files from archives using an
already-built restore command. This version is more simple than the
backend equivalent as there is no need to handle the non-recovery case.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
Jeff Davis
Robert Haas
Tom Lane
Fujii Masao
Alvaro Herrera
Michael Paquier
Bruce Momjian
Tomas Vondra
David Rowley
Peter Eisentraut
Thomas Munro
Amit Kapila
Alexander Korotkov