Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Noah Misch
Discussion: https://postgr.es/m/20190617055145.GB18917@paquier.xyz
Backpatch-through: 9.6
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6nZiO9-eEpr1ZD84bT1mBoVmeZkfont8iSpcmYrjhGWgA@mail.gmail.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
Solely relying on a relation's reltuples/relpages estimate to size the
Bloom filters used by amcheck verification makes verification less
effective when the estimates are very stale. In extreme cases,
verification options that use Bloom filters internally could be totally
ineffective, without users receiving any clear indication that certain
types of corruption might easily be missed.
To fix, use RelationGetNumberOfBlocks() instead of relpages to size the
downlink block Bloom filter. Use the same RelationGetNumberOfBlocks()
value to derive a minimum size for the heapallindexed Bloom filter,
rather than completely trusting reltuples. Verification will still be
reasonably effective when the projected/estimated number of Bloom filter
elements is at least 1/5 of the final number of elements, which is
assured by the new sizing logic.
Reported-By: Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-Wzk0ke2J42KrNYBKu0Xovjy-sU5ub7PWjgpbsKdAQcL4OA@mail.gmail.com
Backpatch: 11-, where downlink/heapallindexed verification were added.
Absorb commit e5e04c962a5d12eebbf867ca25905b3ccc34cbe0 from upstream
IANA code, in hopes of silencing warnings from MSVC about negating
a bool value.
Discussion: https://postgr.es/m/20190719035347.GJ1859@paquier.xyz
16828d5 has improved ALTER TABLE so as a column addition does not
require a rewrite for a non-NULL default with constant expressions, but
one spot in the documentation did not get updated consistently.
The documentation also now clarifies the fact that this does not apply
if the expression is volatile, where a table rewrite is still required.
Reported-by: Daniel Westermann
Author: Ian Barwick
Reviewed-by: Michael Paquier, Daniel Westermann
Discussion: https://postgr.es/m/DB6PR0902MB2184C7D5645CF15D75EB7957D2CF0@DB6PR0902MB2184.eurprd09.prod.outlook.com
Backpatch-through: 11
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
Commit 857f9c36cd, which taught nbtree VACUUM to avoid unnecessary
index scans, bumped the nbtree version number from 2 to 3, while adding
the ability for nbtree indexes to be upgraded on-the-fly. Various
assertions that assumed that an nbtree index was always on version 2 had
to be changed to accept any supported version (version 2 or 3 on
Postgres 11).
However, a few assertions were missed in the initial commit, all of
which were in code paths that cache a local copy of the metapage
metadata, where the index had been expected to be on the current version
(no longer version 2) as a generic sanity check. Rather than simply
update the assertions, follow-up commit 0a64b45152 intentionally made
the metapage caching code update the per-backend cached metadata version
without changing the on-disk version at the same time. This could even
happen when the planner needed to determine the height of a B-Tree for
costing purposes. The assertions only fail on Postgres v12 when
upgrading from v10, because they were adjusted to use the authoritative
shared memory metapage by v12's commit dd299df8.
To fix, remove the cache-only upgrade mechanism entirely, and update the
assertions themselves to accept any supported version (go back to using
the cached version in v12). The fix is almost a full revert of commit
0a64b45152 on the v11 branch.
VACUUM only considers the authoritative metapage, and never bothers with
a locally cached version, whereas everywhere else isn't interested in
the metapage fields that were added by commit 857f9c36cd. It seems
unlikely that this bug has affected any user on v11.
Reported-By: Christoph Berg
Bug: #15896
Discussion: https://postgr.es/m/15896-5b25e260fdb0b081%40postgresql.org
Backpatch: 11-, where VACUUM was taught to avoid unnecessary index scans.
A large fraction of this diff is just due to upstream's somewhat
random decision to rename a bunch of internal variables and struct
fields. However, there is an interesting new feature in zic:
it's grown a "-b slim" option that emits zone files without 32-bit
data and other backwards-compatibility hacks. We should consider
whether we wish to enable that.
This should lappend the OIDs, not lcons them; the existing code produced
a list in reversed order. This is harmless for single-key FKs or FKs
where all the key columns are of the same type, which probably explains
how it went unnoticed. But if those conditions are not met,
ATAddForeignKeyConstraint would make the wrong decision about whether an
existing FK needs to be revalidated. I think it would almost always err
in the safe direction by revalidating a constraint that didn't need it.
You could imagine scenarios where the pfeqop check was fooled by
swapping the types of two FK columns in one ALTER TABLE, but that case
would probably be rejected by other tests, so it might be impossible to
get to the worst-case scenario where an FK should be revalidated and
isn't. (And even then, it's likely to be fine, unless there are weird
inconsistencies in the equality behavior of the replacement types.)
However, this is a performance bug at least.
Noted while poking around to see whether lcons calls could be converted
to lappend.
This bug is old, dating to commit cb3a7c2b9, so back-patch to all
supported branches.
Commit 3ca930fc3 modified get_actual_variable_range() to use a new
"SnapshotNonVacuumable" snapshot type for selecting tuples that it
would consider valid. However, because that snapshot type can accept
recently-dead tuples, this caused a bug when using a recently-created
index: we might accept a recently-dead tuple that is an early member
of a broken HOT chain and does not actually match the index entry.
Then, the data extracted from the heap tuple would not necessarily be
an endpoint value of the column; it could even be NULL, leading to
get_actual_variable_range() itself reporting "found unexpected null
value in index". Even without an error, this could lead to poor
plan choices due to an erroneous notion of the endpoint value.
We can improve matters by changing the code to use the index-only
scan technique (which didn't exist when get_actual_variable_range was
originally written). If any of the tuples in a HOT chain are live
enough to satisfy SnapshotNonVacuumable, we take the data from the
index entry, ignoring what is in the heap. This fixes the problem
without changing the live-vs-dead-tuple behavior from what was
intended by commit 3ca930fc3.
A side benefit is that for static tables we might not have to touch
the heap at all (when the extremal value is in an all-visible page).
In addition, we can save some overhead by not having to create a
complete ExecutorState, and we don't need to run FormIndexDatum,
avoiding more cycles as well as the possibility of failure for
indexes on expressions. (I'm not sure that this code would ever
be used to determine the extreme value of an expression, in the
current state of the planner; but it's definitely possible that
lower-order columns of the selected index could be expressions.
So one could construct perhaps-artificial examples in which the
old code unexpectedly failed due to trying to compute an
expression's value for a now-dead row.)
Per report from Manuel Rigger. Back-patch to v11 where commit
3ca930fc3 came in.
Discussion: https://postgr.es/m/CA+u7OA7W4NWEhCvftdV6_8bbm2vgypi5nuxfnSEJQqVKFSUoMg@mail.gmail.com
match_clause_to_partition_key incorrectly would return
PARTCLAUSE_UNSUPPORTED if a bool qual could not be matched to the current
partition key. This was a problem, as it causes the calling function to
discard the qual and not try to match it to any other partition key. If
there was another partition key which did match this qual, then the qual
would not be checked again and we could fail to prune some partitions.
The worst this could do was to cause partitions not to be pruned when they
could have been, so there was no danger of incorrect query results here.
Fix this by changing match_boolean_partition_clause to have it return a
PartClauseMatchStatus rather than a boolean value. This allows it to
communicate if the qual is unsupported or if it just does not match this
particular partition key, previously these two cases were treated the
same. Now, if match_clause_to_partition_key is unable to match the qual
to any other qual type then we can simply return the value from the
match_boolean_partition_clause call so that the calling function properly
treats the qual as either unmatched or unsupported.
Reported-by: Rares Salcudean
Reviewed-by: Amit Langote
Backpatch-through: 11 where partition pruning was introduced
Discussion: https://postgr.es/m/CAHp_FN2xwEznH6oyS0hNTuUUZKp5PvegcVv=Co6nBXJ+mC7Y5w@mail.gmail.com
REL_11_STABLE's configure does not select C99 mode by default, so using
C99 block initializer broke the build for some compilers. Revert to C89
in that branch.
Author: Michaël Paquier
Discussion: https://postgr.es/m/20190710070122.GE1031@paquier.xyz
This can cause valgrind to complain, as the flag marking a buffer as a
temporary copy was not getting initialized.
While on it, fill in with zeros newly-created buffer pages. This does
not matter when loading a block from a temporary file, but it makes the
push of an index tuple into a new buffer page safer.
This has been introduced by 1d27dcf, so backpatch all the way down to
9.4.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15899-0d24fb273b3dd90c@postgresql.org
Backpatch-through: 9.4
Otherwise the regressplans.sh tests generate extremely slow nested
loop joins. Back-patch to 11 where the hash join tests came in.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20190708055256.GB2709%40paquier.xyz
A function that is declared to return a named composite type must
return tuple datums that are physically marked as having that type.
The plpgsql code path that allowed directly returning an expanded-record
datum forgot to check that, so that an expanded record marked as type
RECORDOID could be returned if it had a physically-compatible tupdesc.
This'd be harmless, I think, if the record value never escaped the
current session --- but it's possible for it to get stored into a table,
and then subsequent sessions can't interpret the anonymous record type.
Fix by flattening the record into a tuple datum and overwriting its
type/typmod fields, if its declared type doesn't match the function's
declared type. (In principle it might be possible to just change the
expanded record's stored type ID info, but there are enough tricky
consequences that I didn't want to mess with that, especially not in
a back-patched bug fix.)
Per bug report from Steve Rogerson. Back-patch to v11 where the bug
was introduced.
Discussion: https://postgr.es/m/cbaecae6-7b87-584e-45f6-4d047b92ca2a@yewtc.demon.co.uk
d4c3a156c added code to remove columns that were not part of a table's
PRIMARY KEY constraint from the GROUP BY clause when all the primary key
columns were present in the group by. This is fine to do since we know
that there will only be one row per group coming from this relation.
However, the logic failed to consider inheritance parent relations. These
can have child relations without a primary key, but even if they did, they
could duplicate one of the parent's rows or one from another child
relation. In this case, those additional GROUP BY columns are required.
Fix this by disabling the optimization for inheritance parent tables.
In v11 and beyond, partitioned tables are fine since partitions cannot
overlap and before v11 partitioned tables could not have a primary key.
Reported-by: Manuel Rigger
Discussion: http://postgr.es/m/CA+u7OA7VLKf_vEr6kLF3MnWSA9LToJYncgpNX2tQ-oWzYCBQAw@mail.gmail.com
Backpatch-through: 9.6
Don't think that the context "UPDATE tab SET var =" is a GUC-setting
command.
If we have "SET var =" but the "var" is not a known GUC variable,
don't offer any completions. The most likely explanation is that
we've misparsed the context and it's not really a GUC-setting command.
Per gripe from Ken Tanzer. Back-patch to 9.6. The issue exists
further back, but before 9.6 the code looks very different and it
doesn't actually know whether the "var" name matches anything,
so I desisted from trying to fix it.
Discussion: https://postgr.es/m/CAD3a31XpXzrZA9TT3BqLSHghdTK+=cXjNCE+oL2Zn4+oWoc=qA@mail.gmail.com
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190629210334.GA1244217@rfd.leadboat.com
The logic in reorder_grouping_sets to order grouping set elements to
match a pre-specified sort ordering was defective, resulting in
unnecessary sort nodes (though the query output would still be
correct). Repair, simplifying the code a little, and add a test.
Per report from Richard Guo, though I didn't use their patch. Original
bug seems to have been my fault.
Backpatch back to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/CAN_9JTzyjGcUjiBHxLsgqfk7PkdLGXiM=pwM+=ph2LsWw0WO1A@mail.gmail.com
We forgot to map column numbers to/from the default partition for
various operations, leading to valid cases failing with spurious
errors, such as
ERROR: attribute N of type some_partition has been dropped
It was also possible that the search for conflicting rows in the default
partition when attaching another partition would fail to detect some.
Secondarily, it was also possible that such a search should be skipped
(because the constraint was implied) but wasn't.
Fix all this by mapping column numbers when necessary.
Reported by: Daniel Wilches
Author: Amit Langote
Discussion: https://postgr.es/m/15873-8c61945d6b3ef87c@postgresql.org
When a partitioned tables contains foreign tables as partitions, it is
not possible to implement unique or primary key indexes -- but when
regular indexes are created, there is no reason to do anything other
than ignoring such partitions. We were raising errors upon encountering
the foreign partitions, which is unfriendly and doesn't protect against
any actual problems.
Relax this restriction so that index creation is allowed on partitioned
tables containing foreign partitions, becoming a no-op on them. (We may
later want to redefine this so that the FDW is told to create the
indexes on the foreign side.) This applies to CREATE INDEX, as well as
ALTER TABLE / ATTACH PARTITION and CREATE TABLE / PARTITION OF.
Backpatch to 11, where indexes on partitioned tables were introduced.
Discussion: https://postgr.es/m/15724-d5a58fa9472eef4f@postgresql.org
Author: Álvaro Herrera
Reviewed-by: Amit Langote
Up to now, the MSVC build scripts are able to support only one fixed
version of OpenSSL, and they lacked logic to detect the version of
OpenSSL a given compilation of Postgres is linking to (currently 1.0.2,
the latest LTS of upstream which will be EOL'd at the end of 2019).
This commit adds more logic to detect the version of OpenSSL used by a
build and makes use of it to add support for compilation with OpenSSL
1.1.0 which requires a new set of compilation flags to work properly.
The supported OpenSSL installers have changed their library layer with
various library renames with the upgrade to 1.1.0, making the logic a
bit more complicated. The scripts are now able to adapt to the new
world order.
Reported-by: Sergey Pashkov
Author: Juan José Santamaría Flecha, Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15789-8fc75dea3c5a17c8@postgresql.org
Backpatch-through: 9.4
This could trigger valgrind failures when doing ambiguous function name
lookups when no arguments are provided by the caller. The problem has
been introduced in aefeb68, so backpatch to v10. HEAD is fine thanks to
the refactoring done in bfb456c1.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/3d068be5-f617-a5ee-99f6-458a407bfd65@gmail.com
Backpatch-through: 10
This patch reverts all the code changes of commit e76de8861, which turns
out to have been seriously misguided. We can't wait till later to compute
the definition string for an index; we must capture that before applying
the data type change for any column it depends on, else ruleutils.c will
deliverr wrong/misleading results. (This fine point was documented
nowhere, of course.)
I'd also managed to forget that ATExecAlterColumnType executes once per
ALTER COLUMN TYPE clause, not once per statement; which resulted in the
code being basically completely broken for any case in which multiple ALTER
COLUMN TYPE clauses are applied to a table having non-constraint indexes
that must be rebuilt. Through very bad luck, none of the existing test
cases nor the ones added by e76de8861 caught that, but of course it was
soon found in the field.
The previous patch also had an implicit assumption that if a constraint's
index had a dependency on a table column, so would the constraint --- but
that isn't actually true, so it didn't fix such cases.
Instead of trying to delete unneeded index dependencies later, do the
is-there-a-constraint lookup immediately on seeing an index dependency,
and switch to remembering the constraint if so. In the unusual case of
multiple column dependencies for a constraint index, this will result in
duplicate constraint lookups, but that's not that horrible compared to all
the other work that happens here. Besides, such cases did not work at all
before, so it's hard to argue that they're performance-critical for anyone.
Per bug #15865 from Keith Fiske. As before, back-patch to all supported
branches.
Discussion: https://postgr.es/m/15865-17940eacc8f8b081@postgresql.org
Original MIPS-I processors didn't have the LL/SC instructions (nor any
other userland synchronization primitive). If the build toolchain
targets that ISA variant by default, as an astonishingly large fraction
of MIPS platforms still do, the assembler won't take LL/SC without
coercion in the form of a ".set mips2" instruction. But we issued that
unconditionally, making it an ISA downgrade for chips later than MIPS2.
That breaks things for the latest MIPS r6 ISA, which encodes these
instructions differently. Adjust the code so we don't change ISA level
if it's >= 2.
Note that this patch doesn't change what happens on an actual MIPS-I
processor: either the kernel will emulate these instructions
transparently, or you'll get a SIGILL failure. That tradeoff seemed
fine in 2002 when this code was added (cf 3cbe6b247), and it's even
more so today when MIPS-I is basically extinct. But let's add a
comment about that.
YunQiang Su (with cosmetic adjustments by me). Back-patch to all
supported branches.
Discussion: https://postgr.es/m/15844-8f62fe7e163939b3@postgresql.org
This fixes some TAP suites when using msys Perl and a builddir located
in an msys mount point other than "/". For example, builddir=/c/pg
exhibited the problem, since /c/pg falls in mount point "/c".
Back-patch to 9.6, where tests first started to perform such
translations. In back branches, offer both new and old APIs.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20190610045838.GA238501@rfd.leadboat.com
This record uses one metadata buffer and registers some data associated
to the buffer, but when parsing the record for its description a direct
access to the record data was done, but there is none. This leads
usually to an incorrect description, but can also cause crashes like in
pg_waldump. Instead, fix things so as the parsing uses the data
associated to the metadata block.
This is an oversight from 3d92796, so backpatch down to 11.
Author: Michael Paquier
Description: https://postgr.es/m/20190617013059.GA3153@paquier.xyz
Backpatch-through: 11
This puts back reverted commit de87a084c0, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
WHERE EXISTS (...) queries cannot be executed by Parallel Hash Join
with jointype JOIN_UNIQUE_INNER, because there is no way to make a
partial plan totally unique. The consequence of allowing such plans
was duplicate results from some EXISTS queries.
Back-patch to 11. Bug #15857.
Author: Thomas Munro
Reviewed-by: Tom Lane
Reported-by: Vladimir Kriukov
Discussion: https://postgr.es/m/15857-d1ba2a64bce0795e%40postgresql.org
