Per code coverage reports, we had zero regression test coverage
of these functions. That came back to bite us, as apparently
that's allowed us to miss discovering misbehavior of this code
with AIX's xlc compiler. Install relevant portions of the
test cases added in 97957fdba, 2f0472030, 19fa97731.
(Assuming the expected outcome that the xlc problem does appear
in back branches, a code fix will follow.)
Discussion: https://postgr.es/m/CA+hUKGK=DOC+hE-62FKfZy=Ybt5uLkrg3zCZD-jFykM-iPn8yw@mail.gmail.com
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
Dropping a temp table could entail TOAST table access to clean out
toasted catalog entries, such as large pg_constraint.conbin strings
for complex CHECK constraints. If we did that via ON COMMIT DROP,
we triggered the assertion in init_toast_snapshot(), because
there was no provision for setting up a snapshot for the drop
actions. Fix that.
(I assume here that the adjacent truncation actions for ON COMMIT
DELETE ROWS don't have a similar problem: it doesn't seem like
nontransactional truncations would need to touch any toasted fields.
If that proves wrong, we could refactor a bit to have the same
snapshot acquisition cover that too.)
The test case added here does not fail before v15, because that
assertion was added in 277692220 which was not back-patched.
However, the race condition the assertion warns of surely
exists further back, so back-patch to all supported branches.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-x26=_QxxgdJyNbiCDzvtr2WV5ZDso_v-CukKEe6cBZw@mail.gmail.com
Commit dc7d70ea added functions that read the control file, but didn't
acquire ControlFileLock. With unlucky timing, file systems that have
weak interlocking like ext4 and ntfs could expose partially overwritten
contents, and the checksum would fail.
Back-patch to all supported releases.
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Anton A. Melnikov <aamelnikov@inbox.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20221123014224.xisi44byq3cf5psi%40awork3.anarazel.de
This could only affect HASH partitioned tables with at least 2 partition
key columns.
If partition pruning was delayed until execution and the query contained
an IS NULL qual on one of the partitioned keys, and some subsequent
partitioned key was being compared to a non-Const, then this could result
in a crash due to the incorrect keyno being used to calculate the
stateidx for the expression evaluation code.
Here we fix this by properly skipping partitioned keys which have a
nullkey set. Effectively, this must be the same as what's going on
inside perform_pruning_base_step().
Sergei Glukhov also provided a patch, but that's not what's being used
here.
Reported-by: Sergei Glukhov
Reviewed-by: tender wang, Sergei Glukhov
Discussion: https://postgr.es/m/d05b26fa-af54-27e1-f693-6c31590802fa@postgrespro.ru
Backpatch-through: 11, where runtime partition pruning was added.
get_steps_using_prefix_recurse() incorrectly assumed that it could stop
recursive processing of the 'prefix' list when cur_keyno was one before
the step_lastkeyno. Since hash partition pruning can prune using IS
NULL quals, and these IS NULL quals are not present in the 'prefix'
list, then that logic could cause more levels of recursion than what is
needed and lead to there being no more items in the 'prefix' list to
process. This would manifest itself as a crash in some code that
expected the 'start' ListCell not to be NULL.
Here we adjust the logic so that instead of stopping recursion at 1 key
before the step_lastkeyno, we just look at the llast(prefix) item and
ensure we only recursively process up until just before whichever the last
key is. This effectively allows keys to be missing in the 'prefix' list.
This change does mean that step_lastkeyno is no longer needed, so we
remove that from the static functions. I also spent quite some time
reading this code and testing it to try to convince myself that there
are no other issues. That resulted in the irresistible temptation of
rewriting some comments, many of which were just not true or inconcise.
Reported-by: Sergei Glukhov
Reviewed-by: Sergei Glukhov, tender wang
Discussion: https://postgr.es/m/2f09ce72-315e-2a33-589a-8519ada8df61@postgrespro.ru
Backpatch-through: 11, where partition pruning was introduced.
While these two built-in functions do exactly the same thing,
CURRENT_USER seems preferable to use in documentation examples.
It's easier to look up if the reader is unsure what it is.
Also, this puts these examples in sync with an adjacent example
that already used CURRENT_USER.
Per question from Kirk Parker.
Discussion: https://postgr.es/m/CANwZ8rmN_Eb0h0hoMRS8Feftaik0z89PxVsKg+cP+PctuOq=Qg@mail.gmail.com
In a selective restore, ACLs for a table should be dumped if the
table is selected to be dumped. However, if the table has both
table-level and column-level ACLs, only the table-level ACL was
restored. This happened because _tocEntryRequired assumed that
an ACL could have only one dependency (the one on its table),
and punted if there was more than one. But since commit ea9125304,
column-level ACLs also depend on the table-level ACL if any, to
ensure correct ordering in parallel restores. To fix, adjust the
logic in _tocEntryRequired to ignore dependencies on ACLs.
I extended a test case in 002_pg_dump.pl so that it purports to
test for this; but in fact the test passes even without the fix.
That's because this bug only manifests during a selective restore,
while the scenarios 002_pg_dump.pl tests include only selective dumps.
Perhaps somebody would like to extend the script so that it can test
scenarios including selective restore, but I'm not touching that.
Euler Taveira and Tom Lane, per report from Kong Man.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/DM4PR11MB73976902DBBA10B1D652F9498B06A@DM4PR11MB7397.namprd11.prod.outlook.com
After receiving position data for a lexeme, tsvectorrecv()
advanced its "datalen" value by (npos+1)*sizeof(WordEntry)
where the correct calculation is (npos+1)*sizeof(WordEntryPos).
This accidentally failed to render the constructed tsvector
invalid, but it did result in leaving some wasted space
approximately equal to the space consumed by the position data.
That could have several bad effects:
* Disk space is wasted if the received tsvector is stored into a
table as-is.
* A legal tsvector could get rejected with "maximum total lexeme
length exceeded" if the extra space pushes it over the MAXSTRPOS
limit.
* In edge cases, the finished tsvector could be assigned a length
larger than the allocated size of its palloc chunk, conceivably
leading to SIGSEGV when the tsvector gets copied somewhere else.
The odds of a field failure of this sort seem low, though valgrind
testing could probably have found this.
While we're here, let's express the calculation as
"sizeof(uint16) + npos * sizeof(WordEntryPos)" to avoid the type
pun implicit in the "npos + 1" formulation. It's not wrong
given that WordEntryPos had better be 2 bytes to avoid padding
problems, but it seems clearer this way.
Report and patch by Denis Erokhin. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/009801d9f2d9$f29730c0$d7c59240$@datagile.ru
Add "-gmt 1" to our test invocations of the Tcl "clock" command,
so that they do not consult the timezone environment. While it
doesn't really matter which timezone is used here, it does
matter that the command not fall over entirely. We've now
discovered that at least on FreeBSD, "clock scan" will fail if
/etc/localtime is missing. It seems worth making the test
insensitive to that.
Per Tomas Vondras' buildfarm animal dikkop. Thanks to
Thomas Munro for the diagnosis.
Discussion: https://postgr.es/m/316d304a-1dcd-cea1-3d6c-27f794727a06@enterprisedb.com
As of Xcode 15 (macOS Sonoma), the linker complains about duplicate
references to the same library. We see warnings about libpgport and
libpgcommon being duplicated in many client executables. This is a
consequence of the hack introduced in commit 6b7ef076b to list
libpgport before libpq while not removing it from $(LIBS).
(Commit 8396447cd later applied the same rule to libpgcommon.)
The concern in 6b7ef076b was to ensure that the client executable
wouldn't unintentionally depend on pgport functions from libpq.
That concern is obsolete on any platform for which we can do symbol
export control, because if we can then the pgport functions in libpq
won't be exposed anyway. Hence, we can fix this problem by just
removing libpgport and libpgcommon from $(libpq_pgport), and letting
clients depend on the occurrences in $(LIBS).
In the back branches, do that only on macOS (which we know has
symbol export control). In HEAD, let's be more aggressive and
remove the extra libraries everywhere. The only still-supported
platforms that lack export control are MinGW/Cygwin, and it
doesn't seem worth sweating over ABI stability details for those
(or if somebody does care, it'd probably be possible to perform
symbol export control for those too). As well as being simpler,
this might give some microscopic improvement in build time.
The meson build system is not changed here, as it doesn't have
this particular disease, though it does have some related issues
that we'll fix separately.
Discussion: https://postgr.es/m/467042.1695766998@sss.pgh.pa.us
Commit 7d3b7011b added a link to the statistics functions, which at the
time were anchored under the section for statistics views. aebe989477
added a separate section for statistics functions, but the link was not
updated to point to the new anchor. Fix by changing the xref.
Backpatch to all supported branches.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Discussion: https://postgr.es/m/CAHut+Ptr0jKzNNtWnssLq+3jNhbyaBseqf6NPrWHk08mQFRoTg@mail.gmail.com
Backpatch-through: 11
nbtree's mark/restore processing failed to correctly handle an edge case
involving array key advancement and related search-type scan key state.
Scans with ScalarArrayScalarArrayOpExpr quals requiring mark/restore
processing (for a merge join) could incorrectly conclude that an
affected array/scan key must not have advanced during the time between
marking and restoring the scan's position.
As a result of all this, array key handling within btrestrpos could skip
a required call to _bt_preprocess_keys(). This confusion allowed later
primitive index scans to overlook tuples matching the true current array
keys. The scan's search-type scan keys would still have spurious values
corresponding to the final array element(s) -- not values matching the
first/now-current array element(s).
To fix, remember that "array key wraparound" has taken place during the
ongoing btrescan in a flag variable stored in the scan's state, and use
that information at the point where btrestrpos decides if another call
to _bt_preprocess_keys is required.
Oversight in commit 70bc5833, which taught nbtree to handle array keys
during mark/restore processing, but missed this subtlety. That commit
was itself a bug fix for an issue in commit 9e8da0f7, which taught
nbtree to handle ScalarArrayOpExpr quals natively.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkgP3DDRJxw6DgjCxo-cu-DKrvjEv_ArkP2ctBJatDCYg@mail.gmail.com
Backpatch: 11- (all supported branches).
This code was sloppy about comparison of index columns that
are expressions. It didn't reliably reject cases where one
index has an expression where the other has a plain column,
and it could index off the start of the attmap array, leading
to a Valgrind complaint (though an actual crash seems unlikely).
I'm not sure that the expression-vs-column sloppiness leads
to any visible problem in practice, because the subsequent
comparison of the two expression lists would reject cases
where the indexes have different numbers of expressions
overall. Maybe we could falsely match indexes having the
same expressions in different column positions, but it'd
require unlucky contents of the word before the attmap array.
It's not too surprising that no problem has been reported
from the field. Nonetheless, this code is clearly wrong.
Per bug #18135 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/18135-532f4a755e71e4d2@postgresql.org
We started to use this linker switch in commit 9df308697 of
2004-07-13, which was in the OS X 10.3 era. Apparently it's been a
no-op since around OS X 10.9. Apple's most recent toolchain version
actively complains about it, so it's time to get rid of it.
Discussion: https://postgr.es/m/467042.1695766998@sss.pgh.pa.us
For some reason I used not_like = { pg_dumpall_dbprivs => 1, } in the test
condition of one of the tests added in in c66a7d75e6. That doesn't make sense
for two reasons: 1) not_like isn't a valid test condition 2) the database
should not be dumped in any of the tests. Due to 1), the test achieved its
goal, but clearly the formulation is confusing. Instead use like => {}, with
a comment explaining why.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/3ddf79f2-8b7b-a093-11d2-5c739bc64f86@eisentraut.org
Backpatch: 11-, like c66a7d75e6
Parse analysis of a CallStmt will inject mutable information,
for instance the OID of the called procedure, so that subsequent
DDL may create a need to re-parse the CALL. We failed to detect
this for CALLs in plpgsql routines, because no dependency information
was collected when putting a CallStmt into the plan cache. That
could lead to misbehavior or strange errors such as "cache lookup
failed".
Before commit ee895a655, the issue would only manifest for CALLs
appearing in atomic contexts, because we re-planned non-atomic
CALLs every time through anyway.
It is now apparent that extract_query_dependencies() probably
needs a special case for every utility statement type for which
stmt_requires_parse_analysis() returns true. I wanted to add
something like Assert(!stmt_requires_parse_analysis(...)) when
falling out of extract_query_dependencies_walker without doing
anything, but there are API issues as well as a more fundamental
point: stmt_requires_parse_analysis is supposed to be applied to
raw parser output, so it'd be cheating to assume it will give the
correct answer for post-parse-analysis trees. I contented myself
with adding a comment.
Per bug #18131 from Christian Stork. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18131-576854e79c5cd264@postgresql.org
The initial estimate of the number of distinct ParsedWords is just
that: an estimate. Don't let it exceed what palloc is willing to
allocate. If in fact we need more entries, we'll eventually fail
trying to enlarge the array. But if we don't, this allows success on
inputs that currently draw "invalid memory alloc request size".
Per bug #18080 from Uwe Binder. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18080-d5c5e58fef8c99b7@postgresql.org
The previous wording had a faint archaic whiff to it, and more
importantly used "catalogs" as a verb, which while cutely
self-referential seems likely to provoke confusion in this
particular context. Also consistently use "kind" not "type" to
refer to the different kinds of relations distinguished by relkind.
Per gripe from Martin Nash. Back-patch to supported versions.
Discussion: https://postgr.es/m/169518739902.3727338.4793815593763320945@wrigleys.postgresql.org
The comment introduced by commit e7cb7ee14 was a bit too terse, which
could lead to extensions doing different things within the hook function
than we intend to allow. Extend the comment to explain what they can do
within the hook function.
Back-patch to all supported branches.
In passing, I rephrased a nearby comment that I recently added to the
back branches.
Reviewed by David Rowley and Andrei Lepikhov.
Discussion: https://postgr.es/m/CAPmGK15SBPA1nr3Aqsdm%2BYyS-ay0Ayo2BRYQ8_A2To9eLqwopQ%40mail.gmail.com
PLy_elog() was not able to handle correctly cases where a SPI called
failed, which would fill in a DETAIL string able to trigger an
assertion. We may want to improve this infrastructure so as it is able
to provide any extra detail information provided by an error stack, but
this is left as a future improvement as it could impact existing error
stacks and any applications that depend on them. For now, the assertion
is removed and a regression test is added to cover the case of a failure
with a detail string.
This problem exists since 2bd78eb8d5, so backpatch all the way down
with tweaks to the regression tests output added where required.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/18070-ab9c171cbf4ebb0f@postgresql.org
Backpatch-through: 11
cursor_to_xmlschema() assumed that any Portal must have a tupDesc,
which is not so. Add a defensive check.
It's plausible that this mistake occurred because of the rather
poorly chosen name of the lookup function SPI_cursor_find(),
which in such cases is returning something that isn't very much
like a cursor. Add some documentation to try to forestall future
errors of the same ilk.
Report and patch by Boyu Yang (docs changes by me). Back-patch
to all supported branches.
Discussion: https://postgr.es/m/dd343010-c637-434c-a8cb-418f53bda3b8.yangboyu.yby@alibaba-inc.com
expandRecordVariable() failed to adjust the parse nesting structure
correctly when recursing to inspect an outer-level Var. This could
result in assertion failures or core dumps in corner cases.
Likewise, get_name_for_var_field() failed to adjust the deparse
namespace stack correctly when recursing to inspect an outer-level
Var. In this case the likely result was a "bogus varno" error
while deparsing a view.
Per bug #18077 from Jingzhou Fu. Back-patch to all supported
branches.
Richard Guo, with some adjustments by me
Discussion: https://postgr.es/m/18077-b9db97c6e0ab45d8@postgresql.org
This is a back-patch of commit d57534740 ("Fix EXPLAIN of SEARCH
BREADTH FIRST with a constant initial value") into pre-v14 branches.
At the time I'd thought it was not needed in branches that lack the
SEARCH/CYCLE feature, but that was just a failure of imagination.
It's possible to demonstrate "record type has not been registered"
failures in older branches too, during deparsing of views that contain
references to fields of composite constants.
Back-patch only the code changes, as the test cases added by d57534740
all require SEARCH/CYCLE syntax. A suitable test case will be added
in the upcoming fix for bug #18077.
Discussion: https://postgr.es/m/17644-3bd1f3036d6d7a16@postgresql.org
Discussion: https://postgr.es/m/3607145.1694803130@sss.pgh.pa.us
Teach get_expr_result_type() to manufacture a tuple descriptor directly
from a RowExpr node. If the RowExpr has type RECORD, this is the only
way to get a tupdesc for its result, since even if the rowtype has been
blessed, we don't have its typmod available at this point. (If the
RowExpr has some named composite type, we continue to let the existing
code handle it, since the RowExpr might well not have the correct column
names embedded in it.)
This fixes assorted corner cases illustrated by the added regression
tests.
This is a back-patch of the v13-era commit 8b7a0f1d1 into previous
branches. At the time I'd judged it not important enough to back-patch,
but the upcoming fix for bug #18077 includes a test case that depends
on this working correctly; and 8b7a0f1d1 has now aged long enough to
have good confidence that it won't break anything.
Discussion: https://postgr.es/m/10872.1572202006@sss.pgh.pa.us
Discussion: https://postgr.es/m/3607145.1694803130@sss.pgh.pa.us
This reverts commit a0d87bcd9b, following a remark from Andres Frend
that the new error can be triggered with an incorrect SET TRANSACTION
SNAPSHOT command without being really helpful for the user as it uses
the internal file name.
Discussion: https://postgr.es/m/20230914020724.hlks7vunitvtbbz4@awork3.anarazel.de
Backpatch-through: 11
When a snapshot file fails to be read in ImportSnapshot(), it would
issue an ERROR as "invalid snapshot identifier" when opening a stream
for it in read-only mode. This error message is reworded to be the same
as all the other messages used in this case on failure, which is useful
when debugging this area.
Thinko introduced by bb446b689b where snapshot imports have been
added. A backpatch down to 11 is done as this can improve any work
related to snapshot imports in older branches.
Author: Bharath Rupireddy
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CALj2ACWmr=3KdxDkm8h7Zn1XxBoF6hdzq8WQyMn2y1OL5RYFrg@mail.gmail.com
Backpatch-through: 11
If an out-of-memory error was thrown at an unfortunate time,
ensure_record_cache_typmod_slot_exists() could leak memory and leave
behind a global state that produced an infinite loop on the next call.
Fix by merging RecordCacheArray and RecordIdentifierArray into a single
array. With only one allocation or re-allocation, there is no
intermediate state.
Back-patch to all supported releases.
Reported-by: "James Pang (chaolpan)" <chaolpan@cisco.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/PH0PR11MB519113E738814BDDA702EDADD6EFA%40PH0PR11MB5191.namprd11.prod.outlook.com
The transactions and subtransactions array that was allocated under
snapshot builder memory context and recorded during decoding was not
cleared in case of errors. This can result in an assertion failure if we
attempt to retry logical decoding within the same session. To address this
issue, we register a callback function under the snapshot builder memory
context to clear the recorded transactions and subtransactions array along
with the context.
This problem doesn't exist in PG16 and HEAD as instead of using
InitialRunningXacts, we added the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot (see commit 7f13ac8123).
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: http://postgr.es/m/18055-ab3beed9f4b7b7d6@postgresql.org
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
This could lead to an imprecise choice when splitting an index page of a
GiST index on a tsvector, deciding which entries should remain on the
old page and which entries should move to a new page.
This is wrong since tsearch2 has been moved into core with commit
140d4ebcb4, so backpatch all the way down. This error has been
spotted by valgrind.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
Backpatch-through: 11
Tom Lane
Nathan Bossart
Thomas Munro
David Rowley
Bruce Momjian
Jeff Davis
Daniel Gustafsson
Peter Geoghegan
Michael Paquier
Andres Freund
Etsuro Fujita
Heikki Linnakangas
Amit Kapila
Andrew Dunstan