In commit 0f61d4dd1b, I added code to copy up
column width estimates for each column of a subquery. That code supposed
that the subquery couldn't have any output columns that didn't correspond
to known columns of the current query level --- which is true when a query
is parsed from scratch, but the assumption fails when planning a view that
depends on another view that's been redefined (adding output columns) since
the upper view was made. This results in an assertion failure or even a
crash, as per bug #8025 from lindebg. Remove the Assert and instead skip
the column if its resno is out of the expected range.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We made use of the ROWS estimate for set-returning functions used in FROM,
but not for those used in SELECT targetlists; which is a bit of an
oversight considering there are common usages that require the latter
approach. Improve that. (I had initially thought it might be worth
folding this into cost_qual_eval, but after investigation concluded that
that wouldn't be very helpful, so just do it separately.) Per complaint
from David Johnston.
Back-patch to 9.2, but not further, for fear of destabilizing plan choices
in existing releases.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
cost_index's method for estimating per-tuple costs of evaluating filter
conditions (a/k/a qpquals) was completely wrong in the presence of derived
indexable conditions, such as range conditions derived from a LIKE clause.
This was largely masked in common cases as a result of all simple operator
clauses having about the same costs, but it could show up in a big way when
dealing with functional indexes containing expensive functions, as seen for
example in bug #6579 from Istvan Endredy. Rejigger the calculation to give
sane answers when the indexquals aren't a subset of the baserestrictinfo
list. As a side benefit, we now do the calculation properly for cases
involving join clauses (ie, parameterized indexscans), which we always
overestimated before.
There are still cases where this is an oversimplification, such as clauses
that can be dropped because they are implied by a partial index's
predicate. But we've never accounted for that in cost estimates before,
and I'm not convinced it's worth the cycles to try to do so.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
This reverts commit ff68b256a5.
The recent change to use -fexcess-precision=standard should make those
Asserts safe, and does fix a test case that formerly crashed for me,
so I think there's no need to have a cross-version difference in the
code here.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
While logically correct, these two Asserts could fail depending on the
vagaries of floating-point arithmetic. In particular, on machines with
floating-point registers wider than standard "double" values, it was
possible for the compiler to compare a rounded-to-double value already
stored in memory with an unrounded long double value still in a register.
Given the preceding checks, these assertions aren't adding much, so let's
just get rid of them rather than try to find a compiler-proof fix.
Per report from Pavel Stehule.
Given the lack of previous complaints, and the fact that only developers
would be likely to trip over it, I'm only going to change this in HEAD,
even though the code has been like this for a long time.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
set_append_rel_pathlist supposed that, while computing per-column width
estimates for the appendrel, it could ignore child rels for which the
translated reltargetlist entry wasn't a Var. This gave rise to completely
silly estimates in some common cases, such as constant outputs from some or
all of the arms of a UNION ALL. Instead, fall back on get_typavgwidth to
estimate from the value's datatype; which might be a poor estimate but at
least it's not completely wacko.
That problem was exposed by an Assert in set_subquery_size_estimates, which
unfortunately was still overoptimistic even with that fix, since we don't
compute attr_widths estimates for appendrels that are entirely excluded by
constraints. So remove the Assert; we'll just fall back on get_typavgwidth
in such cases.
Also, since set_subquery_size_estimates calls set_baserel_size_estimates
which calls set_rel_width, there's no need for set_subquery_size_estimates
to call get_typavgwidth; set_rel_width will handle it for us if we just
leave the estimate set to zero. Remove the unnecessary code.
Per report from Erik Rijkers and subsequent investigation.
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
The previous coding failed to account properly for the costs of evaluating
the input expressions of aggregates and window functions, as seen in a
recent gripe from Claudio Freire. (I said at the time that it wasn't
counting these costs at all; but on closer inspection, it was effectively
charging these costs once per output tuple. That is completely wrong for
aggregates, and not exactly right for window functions either.)
There was also a hard-wired assumption that aggregates and window functions
had procost 1.0, which is now fixed to respect the actual cataloged costs.
The costing of WindowAgg is still pretty bogus, since it doesn't try to
estimate the effects of spilling data to disk, but that seems like a
separate issue.
Although rowcount estimates really ought not be NaN, a bug elsewhere
could perhaps result in that, and that would cause Assert failure in
cost_mergejoin, which I believe to be the explanation for bug #5977 from
Anton Kuznetsov. Seems like a good idea to expend a couple more cycles
to prevent that, even though the real bug is elsewhere. Not back-patching,
though, because we don't encourage running production systems with
Asserts on.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
As per the ancient comment for set_rel_width, it really wasn't much good
for relations that aren't plain tables: it would never find any stats and
would always fall back on datatype-based estimates, which are often pretty
silly. Fix that by copying up width estimates from the subquery planning
process.
At some point we might want to do this for CTEs too, but that would be a
significantly more invasive patch because the sub-PlannerInfo is no longer
accessible by the time it's needed. I refrained from doing anything about
that, partly for fear of breaking the unmerged CTE-related patches.
In passing, also generate less bogus width estimates for whole-row Vars.
Per a gripe from Jon Nelson.
It was reporting that these were fully indexed (hence cheap), when of
course they're the exact opposite of that. I'm not certain if the case
would arise in practice, since a clauseless semijoin is hard to produce
in SQL, but if it did happen we'd make some dumb decisions.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
tuple, instead of the former cpu_tuple_cost. It is sane to charge less than
cpu_tuple_cost because Materialize never does any qual-checking or projection,
so it's got less overhead than most plan node types. In particular, we want
to have the same charge here as is charged for readout in cost_sort. That
avoids the problem recently exhibited by Teodor wherein the planner prefers
a useless sort over a materialize step in a context where a lot of rescanning
will happen. The rescan costs should be just about the same for both node
types, so make their estimates the same.
Not back-patching because all of the current logic for rescan cost estimates
is new in 9.0. The old handling of rescans is sufficiently not-sane that
changing this in that structure is a bit pointless, and might indeed cause
regressions.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
mergejoin to shield it from doing mark/restore and refetches. Put an explicit
flag in MergePath so we can centralize the logic that knows about this,
and add costing logic that considers using Materialize even when it's not
forced by the previously-existing considerations. This is in response to
a discussion back in August that suggested that materializing an inner
indexscan can be helpful when the refetch percentage is high enough.
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
Tom Lane
Bruce Momjian
Andrew Dunstan
Alvaro Herrera
Peter Eisentraut
Magnus Hagander
Robert Haas