==========================================
What follows is a set of diffs that cleans up the usage of BLCKSZ.
As a side effect, the person compiling the code can change the
value of BLCKSZ _at_their_own_risk_. By that, I mean that I've
tried it here at 4096 and 16384 with no ill-effects. A value
of 4096 _shouldn't_ affect much as far as the kernel/file system
goes, but making it bigger than 8192 can have severe consequences
if you don't know what you're doing. 16394 worked for me, _BUT_
when I went to 32768 and did an initdb, the SCSI driver broke and
the partition that I was running under went to hell in a hand
basket. Had to reboot and do a good bit of fsck'ing to fix things up.
The patch can be safely applied though. Just leave BLCKSZ = 8192
and everything is as before. It basically only cleans up all of the
references to BLCKSZ in the code.
If this patch is applied, a comment in the config.h file though above
the BLCKSZ define with warning about monkeying around with it would
be a good idea.
Darren darrenk@insightdist.com
(Also cleans up some of the #includes in files referencing BLCKSZ.)
==========================================
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
Subject: [PORTS] Patches for Irix 6.4
I have worked out how to compile PostgreSQL on Irix 6.4 using the -n32 compiler
mode and version 7.1 of the C compiler. (The n32 compiler use 32 bits
addressing,
but allows access to all the instructions in the MIPS4 instruction set.)
There were several problems:
1) The ld command is not referenced as a macro in all the Makefiles. On
this platform, you have to include -n32 on all the ld commands. Makefiles
were changed as needed.
3) Lots of warnings are generated from the compiler. Since the regression
tests worked OK, I didn't attempt to fix them. If anyone wants the compilation
log, please let me know, and I'll email it to you.
The version of postgresql was 970602. Here is Makefile.custom:
CUSTOM_COPT = -O2 -n32
MK_NO_LORDER = 1
LD = ld -n32
CC += -n32
mdunlink() and mdclose() (too !!!) now free MdfdVec for relation
and add it to free list, so it may be re-used for another relation
later.
2. Fix VFD-manager memory leak (found by Massimo ... and me):
mdunlink() has to call FileUnlink() to free allocation for fileName
and add the Vfd slot to the free list.
all local buffers @ xact commit, so accordingly nextFreeLocalBuf
is first local buffer now.
It helps to avoid unnecessary local buffer allocations in LocalBufferAlloc()
latter ("memmory leaks" in 'order by').
2. ResetLocalBufferPool() lost allocated local buffers:
memset(LocalBufferDescriptors, 0, sizeof(BufferDesc) * NLocBuffer);
(local buffers leak @ xact aborts).
fd = FileNameOpenFile(path, O_RDWR|O_CREAT|O_EXCL, 0600);
/*
* If the file already exists and is empty, we pretend that the
* create succeeded. During bootstrap processing, we skip that check,
* because pg_time, pg_variable, and pg_log get created before their
* .bki file entries are processed.
*
> * As the result of this pretence it was possible to have in
> * pg_class > 1 records with the same relname. Actually, it
> * should be fixed in upper levels, too, but... - vadim 05/06/97
> */
Reply-To: hackers@hub.org, Dan McGuirk <mcguirk@indirect.com>
To: hackers@hub.org
Subject: [HACKERS] tmin writeback optimization
I was doing some profiling of the backend, and noticed that during a certain
benchmark I was running somewhere between 30% and 75% of the backend's CPU
time was being spent in calls to TransactionIdDidCommit() from
HeapTupleSatisfiesNow() or HeapTupleSatisfiesItself() to determine that
changed rows' transactions had in fact been committed even though the rows'
tmin values had not yet been set.
When a query looks at a given row, it needs to figure out whether the
transaction that changed the row has been committed and hence it should pay
attention to the row, or whether on the other hand the transaction is still
in progress or has been aborted and hence the row should be ignored. If
a tmin value is set, it is known definitively that the row's transaction
has been committed. However, if tmin is not set, the transaction
referred to in xmin must be looked up in pg_log, and this is what the
backend was spending a lot of time doing during my benchmark.
So, implementing a method suggested by Vadim, I created the following
patch that, the first time a query finds a committed row whose tmin value
is not set, sets it, and marks the buffer where the row is stored as
dirty. (It works for tmax, too.) This doesn't result in the boost in
real time performance I was hoping for, however it does decrease backend
CPU usage by up to two-thirds in certain situations, so it could be
rather beneficial in high-concurrency settings.
Subject: [HACKERS] lock debug trace
This is an update to my previous patches for lock debugging, already applied
to the current sources. It adds some improvements in the output messages and
some more output in WaitOnLock(). I have used with success to trace a nasty
deadlock condition on pg_listener.
Subject: [HACKERS] linux/alpha patches
These patches lay the groundwork for a Linux/Alpha port. The port doesn't
actually work unless you tweak the linker to put all the pointers in the
first 32 bits of the address space, but it's at least a start. It
implements the test-and-set instruction in Alpha assembly, and also fixes
a lot of pointer-to-integer conversions, which is probably good anyway.
The following patches add to the backend a new debugging flag -K which prints
a debug trace of all locking operations on user relations (those with oid
greater than 20000). The code is compiled only if LOCK_MGR_DEBUG is defined,
so the patch should be harmless if not explicitly enabled.
I'm using the code to trace deadlock conditions caused by application queries
using the command "$POSTMASTER -D $PGDATA -o '-d 1 -K 1'.
The patches are for version 6.0 dated 970126.
1. New flag - BM_JUST_DIRTIED - added for BufferDesc;
2. All data "dirtiers" (WriteBuffer and WriteNoReleaseBuffer)
set this flag (and BM_DIRTY too);
3. All data "flushers" (FlushBuffer, BufferSync and BufferReplace)
turn this flag off just before calling smgr[blind]write/smgrflush
and check this flag after flushing buffer: if it turned ON then
BM_DIRTY will stay ON.
included after storage/ipc.h like other similar cases that were changed
recently.
This one has popped up during the last few days.
My sources are sup'ed today, 13. jan 1996.
regards
Erik Bertelsen.
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
--- src/backend/storage/file/fd.c Thu Sep 12 17:23:38 1996
***************
*** 262,268 ****
Delete(file);
/* save the seek position */
! fileP->seekPos = lseek(fileP->fd, 0L, SEEK_CUR);
Assert( fileP->seekPos != -1);
/* if we have written to the file, sync it */
--- 262,268 ----
Delete(file);
/* save the seek position */
! fileP->seekPos = (long) lseek(fileP->fd, 0L, SEEK_CUR);
Assert( fileP->seekPos != -1);
/* if we have written to the file, sync it */
Submitted by: Randy Terbush <randy@zyzzyva.com>
---
below my signature, there are a coupls of diffs and files in a shell
archive, which were needed to build postgres95 1.02 on Siemens Nixdorfs
MIPS based SINIX systems. Except for the compiler switches "-W0" and
"-LD-Blargedynsym" these diffs should also apply for other SVR4 based
systems. The changes in "Makefile.global" and "genbki.sh" can probably
be ignored (I needed gawk, to make the script run).
There is one bugfix thou. In "src/backend/parser/sysfunc.c" the
function in this file didn't honor the EUROPEAN_DATES ifdef.
---
Submitted by: Frank Ridderbusch <ridderbusch.pad@sni.de>
Originally, I thought the problem was caused by a function that gets
called as a normal function where we want to return a value, and as a
signal handler where we need to have it accept a parameter (the signal
number) and it returns nothing, I was going to case the function name in
the signal call as (void (*)(int)).
Looking at all the source, it turns out this function only gets used as
a signal handler, so I set an int parameter and return void.
I have removed the Linux defines because they are not needed. BSD let
this sloppiness slide. Linux gave a compile error.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
In postgres95/src/backend/nodes/readfuncs, lines 1188 and 1189,
local_node->relname is taken to point to a NameType, while its
defined as a pointer to char. Both the casting to Name and the
call of namestrcpy should, IMHO, be changed appropriately (first
patch).
As far as I could see from the Linux signal header file,
a signal handler is declared as
typedef void (*__sighandler_t)(int);
Few changes to postgres95/src/backend/storage/lmgr/proc.c seem
appropriate to comply with this.
Finally, postgres95/src/bin/pg_version/pg_version.c defines
a function GetDataHome (by default, returning an integer)
and returns NULL in the function, which isn't an integer...
Submitted by: ernst.molitor@uni-bonn.de
- src/backend/tcop/*
- cosmetic changes to OPENLINK patches
- src/backend/storage/*
- more changes, mostly cosmetic
- src/backend/ports/*
- merge in patches for aix and i386_solaris