When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
The only use we have had for amindexnulls is in determining whether an
index is safe to cluster on; but since the addition of the amclusterable
flag, that usage is pretty redundant.
In passing, clean up assorted sloppiness from the last patch that touched
pg_am.h: Natts_pg_am was wrong, and ambuildempty was not documented.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This commit represents a rather heavily editorialized version of
Teodor's builtin_knngist_itself-0.8.2 and builtin_knngist_proc-0.8.1
patches. I redid the opclass API to add a separate Distance method
instead of turning the Consistent method into an illogical mess,
fixed some bit-rot in the rbtree interfaces, and generally worked over
the code style and comments.
There's still no non-code documentation to speak of, but I'll work on
that separately. Some contrib-module changes are also yet to come
(right now, point <-> point is the only KNN-ified operator).
Teodor Sigaev and Tom Lane
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
to be just a minor extension of the previous patch that made "x IS NULL"
indexable, because we can treat the IS NOT NULL condition as if it were
"x < NULL" or "x > NULL" (depending on the index's NULLS FIRST/LAST option),
just like IS NULL is treated like "x = NULL". Aside from any possible
usefulness in its own right, this is an important improvement for
index-optimized MAX/MIN aggregates: it is now reliably possible to get
a column's min or max value cheaply, even when there are a lot of nulls
cluttering the interesting end of the index.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
amgettuple or only implement amgetbitmap, instead of the former assumption
that every AM supports both APIs. Extracted with minor editorialization
from Teodor's fast-GIN-insert patch; whatever becomes of that, this seems
like a simple and reasonable generalization of the index AM interface spec.
scanning; GiST and GIN do not, and it seems like too much trouble to make
them do so. By teaching ExecSupportsBackwardScan() about this restriction,
we ensure that the planner will protect a scroll cursor from the problem
by adding a Materialize node.
In passing, fix another longstanding bug in the same area: backwards scan of
a plan with set-returning functions in the targetlist did not work either,
since the TupFromTlist expansion code pays no attention to direction (and
has no way to run a SRF backwards anyway). Again the fix is to make
ExecSupportsBackwardScan check this restriction.
Also adjust the index AM API specification to note that mark/restore support
is unnecessary if the AM can't produce ordered output.
value. This means that hash index lookups are always lossy and have to be
rechecked when the heap is visited; however, the gain in index compactness
outweighs this when the indexed values are wide. Also, we only need to
perform datatype comparisons when the hash codes match exactly, rather than
for every entry in the hash bucket; so it could also win for datatypes that
have expensive comparison functions. A small additional win is gained by
keeping hash index pages sorted by hash code and using binary search to reduce
the number of index tuples we have to look at.
Xiao Meng
This commit also incorporates Zdenek Kotala's patch to isolate hash metapages
and hash bitmaps a bit better from the page header datastructures.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
inclusions in src/include/catalog/*.h files. The main idea here is to push
function declarations for src/backend/catalog/*.c files into separate headers,
rather than sticking them into the corresponding catalog definition file as
has been done in the past. This commit only carries out that idea fully for
pg_proc, pg_type and pg_conversion, but that's enough for the moment ---
if pg_list.h ever becomes unsafe for frontend code to include, we'll need
to work a bit more.
Zdenek Kotala
provide just a boolean 'amcanorder', instead of fields that specify the
sort operator strategy numbers. We have decided to require ordering-capable
AMs to use btree-compatible strategy numbers, so the old fields are
overkill (and indeed misleading about what's allowed).
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
operator strategy numbers, ie, GiST and GIN. This is almost cosmetic
enough to not need a catversion bump, but since the opr_sanity regression
test has to change in sync with the catalog entry, I figured I'd better
do one.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
* some refactoring and simplify code int gistutil.c and gist.c
* now in some cases it can be called used-defined
picksplit method for non-first column in index, but here
is a place to do more.
* small fix of docs related to support NULL.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
- full concurrency for insert/update/select/vacuum:
- select and vacuum never locks more than one page simultaneously
- select (gettuple) hasn't any lock across it's calls
- insert never locks more than two page simultaneously:
- during search of leaf to insert it locks only one page
simultaneously
- while walk upward to the root it locked only parent (may be
non-direct parent) and child. One of them X-lock, another may
be S- or X-lock
- 'vacuum full' locks index
- improve gistgetmulti
- simplify XLOG records
Fix bug in index_beginscan_internal: LockRelation may clean
rd_aminfo structure, so move GET_REL_PROCEDURE after LockRelation
to the existing X-direction tests. An rtree class now includes 4 actual
2-D tests, 4 1-D X-direction tests, and 4 1-D Y-direction tests.
This involved adding four new Y-direction test operators for each of
box and polygon; I followed the PostGIS project's lead as to the names
of these operators.
NON BACKWARDS COMPATIBLE CHANGE: the poly_overleft (&<) and poly_overright
(&>) operators now have semantics comparable to box_overleft and box_overright.
This is necessary to make r-tree indexes work correctly on polygons.
Also, I changed circle_left and circle_right to agree with box_left and
box_right --- formerly they allowed the boundaries to touch. This isn't
actually essential given the lack of any r-tree opclass for circles, but
it seems best to sync all the definitions while we are at it.
2. improve vacuum for gist
- use FSM
- full vacuum:
- reforms parent tuple if it's needed
( tuples was deleted on child page or parent tuple remains invalid
after crash recovery )
- truncate index file if possible
3. fixes bugs and mistakes
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
Tom Lane
Bruce Momjian
Heikki Linnakangas
Robert Haas
Magnus Hagander
Teodor Sigaev
PostgreSQL Daemon