Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Code that check the flag no longer need #ifdef's, which is more convenient.
In particular, makes it easier to write extensions that depend on it.
In the passing, modify sslinfo's ssl_is_used function to check ssl_in_use
instead of the OpenSSL specific 'ssl' pointer. It doesn't make any
difference currently, as sslinfo is only compiled when built with OpenSSL,
but seems cleaner anyway.
Obviously, every translation unit should not be declaring this
separately. It needs to be PGDLLIMPORT as well, to avoid breaking
third-party code that uses any of the functions that the commit
mentioned above changed to macros.
A background worker can use pq_redirect_to_shm_mq() to direct protocol
that would normally be sent to the frontend to a shm_mq so that another
process may read them.
The receiving process may use pq_parse_errornotice() to parse an
ErrorResponse or NoticeResponse from the background worker and, if
it wishes, ThrowErrorData() to propagate the error (with or without
further modification).
Patch by me. Review by Andres Freund.
Move the functions within the file so that public interface functions come
first, followed by internal functions. Previously, be_tls_write was first,
then internal stuff, and finally the rest of the public interface, which
clearly didn't make much sense.
Per Andres Freund's complaint.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
The previous naming broke the query that libpq's lo_initialize() uses
to collect the OIDs of the server-side functions it requires, because
that query effectively assumes that there is only one function named
lo_create in the pg_catalog schema (and likewise only one lo_open, etc).
While we should certainly make libpq more robust about this, the naive
query will remain in use in the field for the foreseeable future, so it
seems the only workable choice is to use a different name for the new
function. lo_from_bytea() won a small straw poll.
Back-patch into 9.4 where the new function was introduced.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Previously, in some places, socket creation errors were checked for
negative values, which is not true for Windows because sockets are
unsigned. This masked socket creation errors on Windows.
Backpatch through 9.0. 8.4 doesn't have the infrastructure to fix this.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
Commit 613c6d26bd sloppily replaced a
lookup of the UID obtained from getpeereid() with a lookup of the
server's own user name, thus totally destroying peer authentication.
Revert. Per report from Christoph Berg.
In passing, make sure get_user_name() zeroes *errstr on success on
Windows as well as non-Windows. I don't think any callers actually
depend on this ATM, but we should be consistent across platforms.
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
Additional non-security issues/improvements spotted by Coverity.
In backend/libpq, no sense trying to protect against port->hba being
NULL after we've already dereferenced it in the switch() statement.
Prevent against possible overflow due to 32bit arithmitic in
basebackup throttling (not yet released, so no security concern).
Remove nonsensical check of array pointer against NULL in procarray.c,
looks to be a holdover from 9.1 and earlier when there were pointers
being used but now it's just an array.
Remove pointer check-against-NULL in tsearch/spell.c as we had already
dereferenced it above (in the strcmp()).
Remove dead code from adt/orderedsetaggs.c, isnull is checked
immediately after each tuplesort_getdatum() call and if true we return,
so no point checking it again down at the bottom.
Remove recently added minor error-condition memory leak in pg_regress.
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
Commit 820f08cabd claimed to make the server
and libpq handle SSL protocol versions identically, but actually the server
was still accepting SSL v3 protocol while libpq wasn't. Per discussion,
SSL v3 is obsolete, and there's no good reason to continue to accept it.
So make the code really equivalent on both sides. The behavior now is
that we use the highest mutually-supported TLS protocol version.
Marko Kreen, some comment-smithing by me
It's worth distinguishing these cases from run-of-the-mill wrong-password
problems, since users have been known to waste lots of time pursuing the
wrong theory about what's failing. Now, our longstanding policy about how
to report authentication failures is that we don't really want to tell the
*client* such things, since that might be giving information to a bad guy.
But there's nothing wrong with reporting the details to the postmaster log,
and indeed the comments in this area of the code contemplate that
interesting details should be so reported. We just weren't handling these
particular interesting cases usefully.
To fix, add infrastructure allowing subroutines of ClientAuthentication()
to return a string to be added to the errdetail_log field of the main
authentication-failed error report. We might later want to use this to
report other subcases of authentication failure the same way, but for the
moment I just dealt with password cases.
Per discussion of a patch from Josh Drake, though this is not what
he proposed.
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Previously, lookups of non-existent user names could return "Success";
it will now return "User does not exist" by resetting errno. This also
centralizes the user name lookup code in libpgport.
Report and analysis by Nicolas Marchildon; patch by me
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
Current OpenSSL code includes a BIO_clear_retry_flags() step in the
sock_write() function. Either we failed to copy the code correctly, or
they added this since we copied it. In any case, lack of the clear step
appears to be the cause of the server lockup after connection loss reported
in bug #8647 from Valentine Gogichashvili. Assume that this is correct
coding for all OpenSSL versions, and hence back-patch to all supported
branches.
Diagnosis and patch by Alexander Kukushkin.
These functions must be careful that they return the intended value of
errno to their callers. There were several scenarios where this might
not happen:
1. The recent SSL renegotiation patch added a hunk of code that would
execute after setting errno. In the first place, it's doubtful that we
should consider renegotiation to be successfully completed after a failure,
and in the second, there's no real guarantee that the called OpenSSL
routines wouldn't clobber errno. Fix by not executing that hunk except
during success exit.
2. errno was left in an unknown state in case of an unrecognized return
code from SSL_get_error(). While this is a "can't happen" case, it seems
like a good idea to be sure we know what would happen, so reset errno to
ECONNRESET in such cases. (The corresponding code in libpq's fe-secure.c
already did this.)
3. There was an (undocumented) assumption that client_read_ended() wouldn't
change errno. While true in the current state of the code, this seems less
than future-proof. Add explicit saving/restoring of errno to make sure
that changes in the called functions won't break things.
I see no need to back-patch, since #1 is new code and the other two issues
are mostly hypothetical.
Per discussion with Amit Kapila.
With these, one need no longer manipulate large object descriptors and
extract numeric constants from header files in order to read and write
large object contents from SQL.
Pavel Stehule, reviewed by Rushabh Lathia.
asprintf(), aside from not being particularly portable, has a fundamentally
badly-designed API; the psprintf() function that was added in passing in
the previous patch has a much better API choice. Moreover, the NetBSD
implementation that was borrowed for the previous patch doesn't work with
non-C99-compliant vsnprintf, which is something we still have to cope with
on some platforms; and it depends on va_copy which isn't all that portable
either. Get rid of that code in favor of an implementation similar to what
we've used for many years in stringinfo.c. Also, move it into libpgcommon
since it's not really libpgport material.
I think this patch will be enough to turn the buildfarm green again, but
there's still cosmetic work left to do, namely get rid of pg_asprintf()
in favor of using psprintf(). That will come in a followon patch.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
The existing renegotiation code was home for several bugs: it might
erroneously report that renegotiation had failed; it might try to
execute another renegotiation while the previous one was pending; it
failed to terminate the connection if the renegotiation never actually
took place; if a renegotiation was started, the byte count was reset,
even if the renegotiation wasn't completed (this isn't good from a
security perspective because it means continuing to use a session that
should be considered compromised due to volume of data transferred.)
The new code is structured to avoid these pitfalls: renegotiation is
started a little earlier than the limit has expired; the handshake
sequence is retried until it has actually returned successfully, and no
more than that, but if it fails too many times, the connection is
closed. The byte count is reset only when the renegotiation has
succeeded, and if the renegotiation byte count limit expires, the
connection is terminated.
This commit only touches the master branch, because some of the changes
are controversial. If everything goes well, a back-patch might be
considered.
Per discussion started by message
20130710212017.GB4941@eldon.alvh.no-ip.org
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
Instead of just reporting which user failed to log in, log both the
line number in the active pg_hba.conf file (which may not match reality
in case the file has been edited and not reloaded) and the contents of
the matching line (which will always be correct), to make it easier
to debug incorrect pg_hba.conf files.
The message to the client remains unchanged and does not include this
information, to prevent leaking security sensitive information.
Reviewed by Tom Lane and Dean Rasheed
The length of a socket path name is constrained by the size of struct
sockaddr_un, and there's not a lot we can do about it since that is a
kernel API. However, it would be a good thing if we produced an
intelligible error message when the user specifies a socket path that's too
long --- and getaddrinfo's standard API is too impoverished to do this in
the natural way. So insert explicit tests at the places where we construct
a socket path name. Now you'll get an error that makes sense and even
tells you what the limit is, rather than something generic like
"Non-recoverable failure in name resolution".
Per trouble report from Jeremy Drake and a fix idea from Andrew Dunstan.
Files opened with BasicOpenFile or PathNameOpenFile are not automatically
cleaned up on error. That puts unnecessary burden on callers that only want
to keep the file open for a short time. There is AllocateFile, but that
returns a buffered FILE * stream, which in many cases is not the nicest API
to work with. So add function called OpenTransientFile, which returns a
unbuffered fd that's cleaned up like the FILE* returned by AllocateFile().
This plugs a few rare fd leaks in error cases:
1. copy_file() - fixed by by using OpenTransientFile instead of BasicOpenFile
2. XLogFileInit() - fixed by adding close() calls to the error cases. Can't
use OpenTransientFile here because the fd is supposed to persist over
transaction boundaries.
3. lo_import/lo_export - fixed by using OpenTransientFile instead of
PathNameOpenFile.
In addition to plugging those leaks, this replaces many BasicOpenFile() calls
with OpenTransientFile() that were not leaking, because the code meticulously
closed the file on error. That wasn't strictly necessary, but IMHO it's good
for robustness.
The same leaks exist in older versions, but given the rarity of the issues,
I'm not backpatching this. Not yet, anyway - it might be good to backpatch
later, after this mechanism has had some more testing in master branch.
Do read/write permissions checks at most once per large object descriptor,
not once per lo_read or lo_write call as before. The repeated tests were
quite useless in the read case since the snapshot-based tests were
guaranteed to produce the same answer every time. In the write case,
the extra tests could in principle detect revocation of write privileges
after a series of writes has started --- but there's a race condition there
anyway, since we'd check privileges before performing and certainly before
committing the write. So there's no real advantage to checking every
single time, and we might as well redefine it as "only check the first
time".
On the same reasoning, remove the LargeObjectExists checks in inv_write
and inv_truncate. We already checked existence when the descriptor was
opened, and checking again doesn't provide any real increment of safety
that would justify the cost.
Fix broken-on-bigendian-machines byte-swapping functions, add missed update
of alternate regression expected file, improve error reporting, remove some
unnecessary code, sync testlo64.c with current testlo.c (it seems to have
been cloned from a very old copy of that), assorted cosmetic improvements.
4TB large objects (standard 8KB BLCKSZ case). For this purpose new
libpq API lo_lseek64, lo_tell64 and lo_truncate64 are added. Also
corresponding new backend functions lo_lseek64, lo_tell64 and
lo_truncate64 are added. inv_api.c is changed to handle 64-bit
offsets.
Patch contributed by Nozomi Anzai (backend side) and Yugo Nagata
(frontend side, docs, regression tests and example program). Reviewed
by Kohei Kaigai. Committed by Tatsuo Ishii with minor editings.
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
rc should be an int here, not a pgsocket. Fairly harmless as long as
pgsocket is an integer type, but nonetheless wrong. Error introduced
in commit 87091cb1f1.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
In e5e2fc842c, blank lines were removed
after a comment block, which now looks as though the comment refers to
the immediately following code, but it actually refers to the
preceding code. So put the blank lines back.
lost. The only way we detect that at the moment is when write() fails when
we try to write to the socket.
Florian Pflug with small changes by me, reviewed by Greg Jaskiewicz.
An empty HBA file is surely an error, since it means there is no way to
connect to the server. We've not heard identifiable reports of people
actually doing that, but this will also close off the case Thom Brown just
complained of, namely pointing hba_file at a directory. (On at least some
platforms with some directories, it will read as an empty file.)
Perhaps this should be back-patched, but given the lack of previous
complaints, I won't add extra work for the translators.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
This fixes SSPI login failures showing "The function
requested is not supported", often showing up when connecting
to localhost. The reason was not properly updating the SSPI
handle when multiple roundtrips were required to complete the
authentication sequence.
Report and analysis by Ahmed Shinwari, patch by Magnus Hagander
The previous coding was ugly, as it marked special tokens as such in the
wrong stage, relying on workarounds to figure out if they had been
quoted in the original or not. This made it impossible to have specific
keywords be recognized as such only in certain positions in HBA lines,
for example. Fix by restructuring the parser code so that it remembers
whether tokens were quoted or not. This eliminates widespread knowledge
of possible known keywords for all fields.
Also improve memory management in this area, to use memory contexts that
are reset as a whole instead of using retail pfrees; this removes a
whole lotta crufty (and probably slow) code.
Instead of calling strlen() three times in next_field_expand on the
returned token to find out whether there was a comma (and strip it),
pass back the info directly from the callee, which is simpler.
In passing, update historical artifacts in hba.c API.
Authors: Brendan Jurd, Alvaro Herrera
Reviewed by Pavel Stehule
This unifies a bunch of ugly #ifdef's in one place. Per discussion,
we only need this where HAVE_UNIX_SOCKETS, so no need to cover Windows.
Marko Kreen, some adjustment by Tom Lane
It turns out the reason we hadn't found out about the portability issues
with our credential-control-message code is that almost no modern platforms
use that code at all; the ones that used to need it now offer getpeereid(),
which we choose first. The last holdout was NetBSD, and they added
getpeereid() as of 5.0. So far as I can tell, the only live platform on
which that code was being exercised was Debian/kFreeBSD, ie, FreeBSD kernel
with Linux userland --- since glibc doesn't provide getpeereid(), we fell
back to the control message code. However, the FreeBSD kernel provides a
LOCAL_PEERCRED socket parameter that's functionally equivalent to Linux's
SO_PEERCRED. That is both much simpler to use than control messages, and
superior because it doesn't require receiving a message from the other end
at just the right time.
Therefore, add code to use LOCAL_PEERCRED when necessary, and rip out all
the credential-control-message code in the backend. (libpq still has such
code so that it can still talk to pre-9.1 servers ... but eventually we can
get rid of it there too.) Clean up related autoconf probes, too.
This means that libpq's requirepeer parameter now works on exactly the same
platforms where the backend supports peer authentication, so adjust the
documentation accordingly.
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
Since we now include a sample line for replication on local
connections in pg_hba.conf, don't include it where local
connections aren't available (such as on win32).
Also make sure we use authmethodlocal and not authmethod on
the sample line.
In a couple of places we said "not supported on this platform" for cases
that aren't really platform-specific, but could depend on configuration
options such as --with-openssl. Use "not supported by this build" instead,
as that doesn't convey the impression that you can't fix it without moving
to another OS; that's also more consistent with the wording used for an
identical error case in guc.c.
No back-patch, as the clarity gain is small enough to not be worth
burdening translators with back-branch changes.
Most commenters agreed that this is more friendly than silently failing
to match the line during actual connection attempts. Also, this will
prevent corner cases that might arise when trying to handle such a line
when the SSL code isn't turned on. An example is that specifying
clientcert=1 in such a line would formerly result in a completely
misleading complaint that root.crt wasn't present, as seen in a recent
report from Marc-Andre Laverdiere. While we could have instead fixed
that specific behavior, it seems likely that we'd have a continuing stream
of such bizarre behaviors if we keep on allowing hostssl lines when SSL is
disabled.
Back-patch to 8.4, where clientcert was introduced. Earlier versions don't
have this specific issue, and the code is enough different to make this
patch not applicable without more work than it seems worth.
than on other platforms, and only IPv6 addresses are returned. Because of
those two issues, fall back to ioctl(SIOCGIFCONF) on HP/UX, so that it at
least compiles and finds IPv4 addresses. This function is currently only
used for interpreting samehost/samenet in pg_hba.conf, which isn't that
critical.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
The local variable "sock" can be unused depending on compilation flags.
But there seems no particular need for it, since the kernel calls can
just as easily say port->sock instead.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
Corrupt RADIUS responses were treated as errors and not ignored
(which the RFC2865 states they should be). This meant that a
user with unfiltered access to the network of the PostgreSQL
or RADIUS server could send a spoofed RADIUS response
to the PostgreSQL server causing it to reject a valid login,
provided the attacker could also guess (or brute-force) the
correct port number.
Fix is to simply retry the receive in a loop until the timeout
has expired or a valid (signed by the correct RADIUS server)
packet arrives.
Reported by Alan DeKok in bug #5687.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
requests for client certs. This lets a client with a keystore select the
appropriate client certificate to send. In particular, this is necessary
to get Java clients to work in all but the most trivial configurations.
Per discussion of bug #5468.
Craig Ringer
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
These files have apparently been edited over the years by a dozen people
with as many different editor settings, which made the alignment of the
paragraphs quite inconsistent and ugly. I made a pass of M-q with Emacs
to straighten it out.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
does a search for the user in the directory first, and then binds with
the DN found for this user.
This allows for LDAP logins in scenarios where the DN of the user cannot
be determined simply by prefix and suffix, such as the case where different
users are located in different containers.
The old way of authentication can be significantly faster, so it's kept
as an option.
Robert Fleming and Magnus Hagander
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
pam_message array contains exactly one PAM_PROMPT_ECHO_OFF message.
Instead, deal with however many messages there are, and don't throw error
for PAM_ERROR_MSG and PAM_TEXT_INFO messages. This logic is borrowed from
openssh 5.2p1, which hopefully has seen more real-world PAM usage than we
have. Per bug #5121 from Ryan Douglas, which turned out to be caused by
the conv_proc being called with zero messages. Apparently that is normal
behavior given the combination of Linux pam_krb5 with MS Active Directory
as the domain controller.
Patch all the way back, since this code has been essentially untouched
since 7.4. (Surprising we've not heard complaints before.)
and SSPI athentication methods. While the old 2000 byte limit was more than
enough for Unix Kerberos implementations, tickets issued by Windows Domain
Controllers can be much larger.
Ian Turner
large number of SIGHUP cycles, these would have run the postmaster out
of memory. Noted while testing memory-leak scenario in postgresql.conf
configuration-change-printing patch.
if salt_len == 0. This seems to be mostly academic, since nearly all calling
code paths guarantee nonempty salt; the only case that doesn't is
PQencryptPassword where the caller could mistakenly pass an empty username.
So, fix it but don't bother backpatching. Per ljb.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
encoding conversion of any elog/ereport message being sent to the frontend.
This generalizes a patch that I put in last October, which suppressed
translation of only specific messages known to be associated with recursive
can't-translate-the-message behavior. As shown in bug #4680, we need a more
general answer in order to have some hope of coping with broken encoding
conversion setups. This approach seems a good deal less klugy anyway.
Patch in all supported branches.
to the documented API value. The previous code got it right as
it's implemented, but accepted too much/too little compared to
the API documentation.
Per comment from Zdenek Kotala.
to pass the full username@realm string to the authentication instead of
just the username. This makes it possible to use pg_ident.conf to authenticate
users from multiple realms as different database users.
it's connection. This is required for applications that unload
the libpq library (such as PHP) in which case we'd otherwise
have pointers to these functions when they no longer exist.
This needs a bit more testing before we can consider a backpatch,
so not doing that yet.
In passing, remove unused functions in backend/libpq.
Bruce Momjian and Magnus Hagander, per report and analysis
by Russell Smith.
of copy/paste:d emails. Much of the contents had already been migrated
into the main documentation, some was out of date and some just plain
wrong.
Keep the "protocol-flowchart" which can still be useful.
* make LDAP use this instead of the hacky previous method to specify
the DN to bind as
* make all auth options behave the same when they are not compiled
into the server
* rename "ident maps" to "user name maps", and support them for all
auth methods that provide an external username
This makes a backwards incompatible change in the format of pg_hba.conf
for the ident, PAM and LDAP authentication methods.
each connection. This makes it possible to catch errors in the pg_hba
file when it's being reloaded, instead of silently reloading a broken
file and failing only when a user tries to connect.
This patch also makes the "sameuser" argument to ident authentication
optional.
method is grouped together in a reasonably similar way, keeping the "global
shared functions" together in their own section as well. Makes it a lot easier
to find your way around the code.
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
issue a helpful error message instead of sending unparsable garbage.
(It is clearly a design error that this doesn't work, but fixing it
is not worth the trouble at this point.) Per discussion.
to validate the realm of the connecting user. By default
it's empty meaning no verification, which is the way
Kerberos authentication has traditionally worked in
PostgreSQL.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
right, there seems precious little reason to have a pile of hand-maintained
endianness definitions in src/include/port/*.h. Get rid of those, and make
the couple of places that used them depend on WORDS_BIGENDIAN instead.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
socket is still read-ready, the code was a tight loop, wasting lots of CPU.
We can't do anything to clear the failure, other than wait, but we should give
other processes more chance to finish and release FDs; so insert a small sleep.
Also, avoid bogus "close(-1)" in this case. Per report from Jim Nasby.
Bruce Momjian
Tom Lane
Robert Haas
Alvaro Herrera
Heikki Linnakangas
Peter Eisentraut
Magnus Hagander
Stephen Frost
Noah Misch
Tatsuo Ishii
Andrew Dunstan
Simon Riggs
Itagaki Takahiro
Neil Conway