and FreeDir routines modeled on the existing AllocateFile/FreeFile.
Like the latter, these routines will avoid failing on EMFILE/ENFILE
conditions whenever possible, and will prevent leakage of directory
descriptors if an elog() occurs while one is open.
Also, reduce PANIC to ERROR in MoveOfflineLogs() --- this is not
critical code and there is no reason to force a DB restart on failure.
All per recent trouble report from Olivier Hubaut.
1) Now puts in exactly the same change as the current-cvs mingw code
does. (see
http://cvs.sourceforge.net/viewcvs.py/mingw/runtime/mingwex/dirent.c?r1=
1.3&r2=1.4, second part of the patch).
2) Updates both xlog.c and slru.c in backend/access/transam/
3) Also updates pg_resetxlog, which also uses readdir() and checks the
errno value after the loop.
Magnus Hagander
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
whereToSendOutput instead because they are really inquiring about
the correct client communication protocol. Update some comments.
This is pointing towards supporting regular FE/BE client protocol
in a standalone backend, per discussion a month or so back.
complete ExtendCLOG() before advancing nextXid, so that if that routine
fails, the next incoming transaction will try it again. Per trouble
report from Christopher Kings-Lynne.
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
post-abort cleanup hooks. I'm surprised that we have not needed this
already, but I need it now to fix a plpgsql problem, and the usefulness
for other dynamically loaded modules seems obvious.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
fixed incorrect initial setting of StartUpID. The logic in XLogWrite()
expects that Write->curridx is advanced to the next page as soon as
LogwrtResult points to the end of the current page, but StartupXLOG()
failed to make that happen when the old WAL ended exactly on a page
boundary. Per trouble report from Hannu Krosing.
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
example from Rao Kumar. This is a very corner corner-case, requiring
a minimum of three closely-spaced database crashes and an unlucky
positioning of the second recovery's checkpoint record before you'd notice
any problem. But the consequences are dire enough that it's a must-fix.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
dead xlog segments are not considered part of a critical section. It is
not necessary to force a database-wide panic if we get a failure in these
operations. Per recent trouble reports.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
Bruce Momjian
Tom Lane
Neil Conway
Peter Eisentraut
Joe Conway
PostgreSQL Daemon